-
Diamond molecular balance: Revolutionizing high-resolution mass spectrometry from MDa to TDa at room temperature
Authors:
Donggeun Lee,
Seung-Woo Jeon,
Chang-Hwan Yi,
Yang-Hee Kim,
Yeeun Choi,
Sang-Hun Lee,
**woong Cha,
Seung-Bo Shim,
Junho Suh,
Il-Young Kim,
Dongyeon Daniel Kang,
Hojoong Jung,
Cherlhyun Jeong,
Jae-pyoung Ahn,
Hee Chul Park,
Sang-Wook Han,
Chulki Kim
Abstract:
The significance of mass spectrometry lies in its unparalleled ability to accurately identify and quantify molecules in complex samples, providing invaluable insights into molecular structures and interactions. Here, we leverage diamond nanostructures as highly sensitive mass sensors by utilizing a self-excitation mechanism under an electron beam in a conventional scanning electron microscope (SEM…
▽ More
The significance of mass spectrometry lies in its unparalleled ability to accurately identify and quantify molecules in complex samples, providing invaluable insights into molecular structures and interactions. Here, we leverage diamond nanostructures as highly sensitive mass sensors by utilizing a self-excitation mechanism under an electron beam in a conventional scanning electron microscope (SEM). The diamond molecular balance (DMB) exhibits exceptional mass resolution of a few MDa and an extensive dynamic range from MDa to TDa, positioning itself as a forefront molecular balance operating at room temperature. Notably, the DMB measures the mass of a single bacteriophage T4, achieving a mass resolution of 4.7 MDa for an analyte at 184 MDa, while precisely determining their positional information on the device. These findings highlight the groundbreaking potential of the DMB as a revolutionary tool for mass analysis at room temperature.
△ Less
Submitted 6 June, 2024; v1 submitted 4 June, 2024;
originally announced June 2024.
-
Seamless monolithic three-dimensional integration of single-crystalline films by growth
Authors:
Ki Seok Kim,
Seunghwan Seo,
Junyoung Kwon,
Doyoon Lee,
Changhyun Kim,
Jung-El Ryu,
Jekyung Kim,
Min-Kyu Song,
Jun Min Suh,
Hang-Gyo Jung,
Youhwan Jo,
Hogeun Ahn,
Sangho Lee,
Kyeongjae Cho,
Jongwook Jeon,
Minsu Seol,
**-Hong Park,
Sang Won Kim,
Jeehwan Kim
Abstract:
The demand for the three-dimensional (3D) integration of electronic components is on a steady rise. The through-silicon-via (TSV) technique emerges as the only viable method for integrating single-crystalline device components in a 3D format, despite encountering significant processing challenges. While monolithic 3D (M3D) integration schemes show promise, the seamless connection of single-crystal…
▽ More
The demand for the three-dimensional (3D) integration of electronic components is on a steady rise. The through-silicon-via (TSV) technique emerges as the only viable method for integrating single-crystalline device components in a 3D format, despite encountering significant processing challenges. While monolithic 3D (M3D) integration schemes show promise, the seamless connection of single-crystalline semiconductors without intervening wafers has yet to be demonstrated. This challenge arises from the inherent difficulty of growing single crystals on amorphous or polycrystalline surfaces post the back-end-of-the-line process at low temperatures to preserve the underlying circuitry. Consequently, a practical growth-based solution for M3D of single crystals remains elusive. Here, we present a method for growing single-crystalline channel materials, specifically composed of transition metal dichalcogenides, on amorphous and polycrystalline surfaces at temperatures lower than 400 °C. Building on this developed technique, we demonstrate the seamless monolithic integration of vertical single-crystalline logic transistor arrays. This accomplishment leads to the development of unprecedented vertical CMOS arrays, thereby constructing vertical inverters. Ultimately, this achievement sets the stage to pave the way for M3D integration of various electronic and optoelectronic hardware in the form of single crystals.
△ Less
Submitted 6 December, 2023; v1 submitted 5 December, 2023;
originally announced December 2023.
-
Multiplication of freestanding semiconductor membranes from a single wafer by advanced remote epitaxy
Authors:
Hyunseok Kim,
Yunpeng Liu,
Kuangye Lu,
Celesta S. Chang,
Kuan Qiao,
Ki Seok Kim,
Bo-In Park,
Junseok Jeong,
Menglin Zhu,
Jun Min Suh,
Yongmin Baek,
You ** Ji,
Sungsu Kang,
Sangho Lee,
Ne Myo Han,
Chansoo Kim,
Chanyeol Choi,
Xinyuan Zhang,
Haozhe Wang,
Ling** Kong,
Jungwon Park,
Kyusang Lee,
Geun Young Yeom,
Sungkyu Kim,
**woo Hwang
, et al. (4 additional authors not shown)
Abstract:
Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to…
▽ More
Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to harvest epitaxial layers using practical processes. Here, we demonstrate a method to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, 2D materials are directly formed on III-N and III-V substrates in epitaxy systems, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of 2D materials and epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because 2D materials allow peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
arXiv:2204.00397
[pdf]
cond-mat.mes-hall
cond-mat.mtrl-sci
cond-mat.other
physics.app-ph
physics.optics
High Density, Localized Quantum Emitters in Strained 2D Semiconductors
Authors:
Gwangwoo Kim,
Hyong Min Kim,
Pawan Kumar,
Mahfujur Rahaman,
Christopher E. Stevens,
Jonghyuk Jeon,
Kiyoung Jo,
Kwan-Ho Kim,
Nicholas Trainor,
Haoyue Zhu,
Byeong-Hyeok Sohn,
Eric A. Stach,
Joshua R. Hendrickson,
Nicholas R Glavin,
Joonki Suh,
Joan M. Redwing,
Deep Jariwala
Abstract:
Two-dimensional chalcogenide semiconductors have recently emerged as a host material for quantum emitters of single photons. While several reports on defect and strain-induced single photon emission from 2D chalcogenides exist, a bottom-up, lithography-free approach to producing a high density of emitters remains elusive. Further, the physical properties of quantum emission in the case of strained…
▽ More
Two-dimensional chalcogenide semiconductors have recently emerged as a host material for quantum emitters of single photons. While several reports on defect and strain-induced single photon emission from 2D chalcogenides exist, a bottom-up, lithography-free approach to producing a high density of emitters remains elusive. Further, the physical properties of quantum emission in the case of strained 2D semiconductors are far from being understood. Here, we demonstrate a bottom-up, scalable, and lithography-free approach to creating large areas of localized emitters with high density (~150 emitters/um2) in a WSe2 monolayer. We induce strain inside the WSe2 monolayer with high spatial density by conformally placing the WSe2 monolayer over a uniform array of Pt nanoparticles with a size of 10 nm. Cryogenic, time-resolved, and gate-tunable luminescence measurements combined with near-field luminescence spectroscopy suggest the formation of localized states in strained regions that emit single photons with a high spatial density. Our approach of using a metal nanoparticle array to generate a high density of strained quantum emitters opens a new path towards scalable, tunable, and versatile quantum light sources.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
The CaloCube calorimeter for high-energy cosmic-ray measurements in space: performance of a large-scale prototype
Authors:
O. Adriani,
A. Agnesi,
S. Albergo,
M. Antonelli,
L. Auditore,
A. Basti,
E. Berti,
G. Bigongiari,
L. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Castellini,
P. W. Cattaneo,
C. Checchia,
R. D Alessandro,
S. Detti,
M. Fasoli,
N. Finetti,
A. Italiano,
P. Maestro,
P. S. Marrocchesi,
N. Mori,
G. Orzan
, et al. (23 additional authors not shown)
Abstract:
The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus…
▽ More
The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus, which is amongst the most important constraints for a space mission. CaloCube is an homogeneous calorimeter whose basic geometry is cubic and isotropic, obtained by filling the cubic volume with small cubic scintillating crystals. In this way it is possible to detect particles arriving from every direction in space, thus maximizing the acceptance. This design summarizes a three-year R&D activity, aiming to both optimize and study the full-scale performance of the calorimeter, in the perspective of a cosmic-ray space mission, and investigate a viable technical design by means of the construction of several sizable prototypes. A large scale prototype, made of a mesh of 5x5x18 CsI(Tl) crystals, has been constructed and tested on high-energy particle beams at CERN SPS accelerator. In this paper we describe the CaloCube design and present the results relative to the response of the large scale prototype to electrons.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
Superconducting Nanoelectromechanical Transducer Resilient to Magnetic Fields
Authors:
**woong Cha,
Hak-Seong Kim,
Jihwan Kim,
Seung-Bo Shim,
Junho Suh
Abstract:
Nanoscale electromechanical coupling provides a unique route towards control of mechanical motions and microwave fields in superconducting cavity electromechanical devices. Though their successes in utilizing the optomechanical or electromechanical back-action effects for various purposes, aluminum imposes severe constraints on their operating conditions with its low superconducting critical tempe…
▽ More
Nanoscale electromechanical coupling provides a unique route towards control of mechanical motions and microwave fields in superconducting cavity electromechanical devices. Though their successes in utilizing the optomechanical or electromechanical back-action effects for various purposes, aluminum imposes severe constraints on their operating conditions with its low superconducting critical temperature (1.2 K) and magnetic field (0.01 T). To extend the potential of the devices, here we fabricate a superconducting electromechanical device employing niobium and demonstrate a set of cavity electromechanical dynamics including back-action cooling and amplification, and electromechanically induced reflection at 4.2 K and in strong magnetic fields up to 0.8 T. This device could be used to realize electromechanical microwave components for quantum technologies by integrating amplifiers, converters, and circulators on a single chip that can be installed at the 4K stage of dilution refrigerators. Moreover, with its ability to control and readout nanomechanical motions simultaneously, this niobium electromechanical transducer could provide powerful nanomechanical sensing platforms.
△ Less
Submitted 25 November, 2020; v1 submitted 12 November, 2020;
originally announced November 2020.
-
Tracker-In-Calorimeter (TIC): a calorimetric approach to tracking gamma rays in space experiments
Authors:
O. Adriani,
G. Ambrosi,
P. Azzarello,
A. Basti,
E. Berti,
B. Bertucci,
G. Bigongiari,
L. Bonechi,
M. Bongi,
S. Bottai,
M. Brianzi,
P. Brogi,
G. Castellini,
E. Catanzani,
C. Checchia,
R. D'Alessandro,
S. Detti,
M. Duranti,
N. Finetti,
V. Formato,
M. Ionica,
P. Maestro,
F. Maletta,
P. S. Marrocchesi,
N. Mori
, et al. (11 additional authors not shown)
Abstract:
A multi-messenger, space-based cosmic ray detector for gamma rays and charged particles poses several design challenges due to the different instrumental requirements for the two kind of particles. Gamma-ray detection requires layers of high Z materials for photon conversion and a tracking device with a long lever arm to achieve the necessary angular resolution to separate point sources; on the co…
▽ More
A multi-messenger, space-based cosmic ray detector for gamma rays and charged particles poses several design challenges due to the different instrumental requirements for the two kind of particles. Gamma-ray detection requires layers of high Z materials for photon conversion and a tracking device with a long lever arm to achieve the necessary angular resolution to separate point sources; on the contrary, charge measurements for atomic nuclei requires a thin detector in order to avoid unwanted fragmentation, and a shallow instrument so to maximize the geometric factor. In this paper, a novel tracking approach for gamma rays which tries to reconcile these two conflicting requirements is presented. The proposal is based on the Tracker-In-Calorimeter (TIC) design that relies on a highly-segmented calorimeter to track the incident gamma ray by sampling the lateral development of the electromagnetic shower at different depths. The effectiveness of this approach has been studied with Monte Carlo simulations and has been validated with test beam data of a detector prototype.
△ Less
Submitted 22 October, 2020; v1 submitted 4 August, 2020;
originally announced August 2020.
-
Optomechanical non-contact measurement of microparticle compressibility in liquids
Authors:
Kewen Han,
Jeewon Suh,
Gaurav Bahl
Abstract:
High-throughput label-free measurements of the optical and mechanical properties of single microparticles play an important role in biological research, drug development, and related large population assays. Mechanical detection techniques that rely on the density contrast of a particle with respect to its environment are blind to neutrally bouyant particles. However, neutrally buoyant particles m…
▽ More
High-throughput label-free measurements of the optical and mechanical properties of single microparticles play an important role in biological research, drug development, and related large population assays. Mechanical detection techniques that rely on the density contrast of a particle with respect to its environment are blind to neutrally bouyant particles. However, neutrally buoyant particles may still have a high compressibility contrast with respect to their environment, opening a window to detection. Here we present a label-free high-throughput approach for measuring the compressibility (bulk modulus) of freely flowing microparticles by means of resonant measurements in an opto-mechano-fluidic resonator.
△ Less
Submitted 30 December, 2017;
originally announced January 2018.
-
Imaging of acoustic pressure modes in opto-mechano-fluidic resonators with a single particle probe
Authors:
Jeewon Suh,
Kewen Han,
Gaurav Bahl
Abstract:
Opto-mechano-fluidic resonators (OMFRs) are a new platform for high-throughput sensing of the mechanical properties of freely flowing microparticles in arbitrary media. Experimental extraction of OMFR mode shapes, especially the acoustic pressure field within the fluidic core, is essential for determining sensitivity and for extracting the particle parameters. Here we demonstrate a new imaging tec…
▽ More
Opto-mechano-fluidic resonators (OMFRs) are a new platform for high-throughput sensing of the mechanical properties of freely flowing microparticles in arbitrary media. Experimental extraction of OMFR mode shapes, especially the acoustic pressure field within the fluidic core, is essential for determining sensitivity and for extracting the particle parameters. Here we demonstrate a new imaging technique for simultaneously capturing the spatially distributed acoustic pressure fields of multiple vibrational modes in the OMFR system. The mechanism operates using microparticles as perturbative imaging probes, and potentially reveals the inverse path towards multimode inertial detection of the particles themselves.
△ Less
Submitted 17 November, 2017;
originally announced November 2017.
-
CaloCube: a novel calorimeter for high-energy cosmic rays in space
Authors:
P. W. Cattaneo,
O. Adriani,
S. Albergo,
L. Auditore,
A. Basti,
E. Berti,
G. Bigongiari,
L. Bonechi,
S. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Carotenuto,
G. Castellini,
R. ďAlessandro,
S. Detti,
M. Fasoli,
N. Finetti,
A. Italiano,
P. Lenzi,
P. Maestro,
P. S. Marrocchesi,
N. Mori,
M. Olmi
, et al. (21 additional authors not shown)
Abstract:
In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. C…
▽ More
In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. CaloCube is a homogeneous calorimeter with cubic geometry, to maximise the acceptance being sensitive to particles from every direction in space; granularity is obtained by relying on small cubic scintillating crystals as active elements. Different scintillating materials have been studied. The crystal sizes and spacing among them have been optimized with respect to the energy resolution. A prototype, based on CsI(Tl) cubic crystals, has been constructed and tested with particle beams. Some results of tests with different beams at CERN are presented.
△ Less
Submitted 23 May, 2017; v1 submitted 19 May, 2017;
originally announced May 2017.
-
Real-time sensing of flowing nanoparticles with electro-opto-mechanics
Authors:
Jeewon Suh,
Kewen Han,
Christopher W Peterson,
Gaurav Bahl
Abstract:
High-Q optical resonators allow label-free detection of individual nanoparticles through perturbation of optical signatures but have practical limitations due to reliance on random diffusion to deliver particles to the sensing region. We have recently developed microfluidic optomechanical resonators that allow detection of free-flowing particles in fluid media with near perfect detection efficienc…
▽ More
High-Q optical resonators allow label-free detection of individual nanoparticles through perturbation of optical signatures but have practical limitations due to reliance on random diffusion to deliver particles to the sensing region. We have recently developed microfluidic optomechanical resonators that allow detection of free-flowing particles in fluid media with near perfect detection efficiency, without requiring labeling, binding, or direct access to the optical mode. Rapid detection of single particles is achieved through a long-range optomechanical interaction that influences the scattered light spectra from the resonator, which can be quantified with post-processing. Here, we present a hybrid electromechanical-optomechanical technique for substantially increasing the bandwidth of these optomechanofluidic sensors, enabling real-time operation. The presented system demonstrates temporal resolution of better than 20~\us (50,000 events/second) with particle sensing resolution down to 490 nm, operating in the air without any stabilization or environmental control. Our technique significantly enhances the sensing capabilities of high-Q optical resonators into the mechanics domain, and allows extremely high-throughput analysis of large nanoparticle populations.
△ Less
Submitted 29 September, 2016;
originally announced September 2016.