-
Simulating surface height and terminus position for marine outlet glaciers using a level set method with data assimilation
Authors:
M. Alamgir Hossain,
Sam Pimentel,
John M. Stockie
Abstract:
We implement a data assimilation framework for integrating ice surface and terminus position observations into a numerical ice-flow model. The model uses the well-known shallow shelf approximation (SSA) coupled to a level set method to capture ice motion and changes in the glacier geometry. The level set method explicitly tracks the evolving ice-atmosphere and ice-ocean boundaries for a marine out…
▽ More
We implement a data assimilation framework for integrating ice surface and terminus position observations into a numerical ice-flow model. The model uses the well-known shallow shelf approximation (SSA) coupled to a level set method to capture ice motion and changes in the glacier geometry. The level set method explicitly tracks the evolving ice-atmosphere and ice-ocean boundaries for a marine outlet glacier. We use an Ensemble Transform Kalman Filter to assimilate observations of ice surface elevation and lateral ice extent by updating the level set function that describes the ice interface. Numerical experiments on an idealized marine-terminating glacier demonstrate the effectiveness of our data assimilation approach for tracking seasonal and multi-year glacier advance and retreat cycles. The model is also applied to simulate Helheim Glacier, a major tidewater-terminating glacier of the Greenland Ice Sheet that has experienced a recent history of rapid retreat. By assimilating observations from remotely-sensed surface elevation profiles we are able to more accurately track the migrating glacier terminus and glacier surface changes. These results support the use of data assimilation methodologies for obtaining more accurate predictions of short-term ice sheet dynamics.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
Experimental and computational comparison of freeze-thaw induced pressure generation in red and sugar maple
Authors:
Maryam Zarrinderakht,
Isabell Konrad,
Timothy R. Wilmot,
Timothy D. Perkins,
Abby K. van den Berg,
John M. Stockie
Abstract:
Sap exudation is the process whereby trees such as sugar (Acer saccharum) and red maple (Acer rubrum) generate unusually high positive stem pressure in response to repeated cycles of freeze and thaw. This elevated xylem pressure permits the sap to be harvested over a period of several weeks and hence is a major factor in the viability of the maple syrup industry. The extensive literature on sap ex…
▽ More
Sap exudation is the process whereby trees such as sugar (Acer saccharum) and red maple (Acer rubrum) generate unusually high positive stem pressure in response to repeated cycles of freeze and thaw. This elevated xylem pressure permits the sap to be harvested over a period of several weeks and hence is a major factor in the viability of the maple syrup industry. The extensive literature on sap exudation documents competing hypotheses regarding the physical and biological mechanisms that drive positive pressure generation in maple, but to date relatively little effort has been expended on devising mathematical models for the exudation process. In this paper, we utilize an existing model of Graf et al. [J. Roy. Soc. Interface 12:20150665, 2015] that describes heat and mass transport within the multiphase gas-liquid-ice mixture in the porous xylem tissue. The model captures the inherent multiscale nature of xylem transport by including phase change and osmotic transport in wood cells on the microscale, which is coupled to heat transport through the tree stem on the macroscale. A parametric study based on simulations with synthetic temperature data identifies the model parameters that have greatest impact on stem pressure build-up. Measured daily temperature fluctuations are then used as model inputs and the resulting simulated pressures are compared directly with experimental measurements taken from mature red and sugar maple stems during the sap harvest season. The results demonstrate that our multiscale freeze-thaw model reproduces realistic exudation behavior, thereby providing novel insights into the specific physical mechanisms that dominate positive pressure generation in maple trees.
△ Less
Submitted 3 January, 2024; v1 submitted 5 June, 2021;
originally announced June 2021.
-
An open-access clicker question bank for numerical analysis
Authors:
M. Alamgir Hossain,
Petra M. Menz,
John M. Stockie
Abstract:
We present a question bank consisting of over 250 multiple-choice and true-false questions covering a broad range of material typically taught in an introductory undergraduate course in numerical analysis or scientific computing. The questions are ideal for polling students during lectures by means of a student response system that uses clicker remotes or smartphones running a suitable app. We des…
▽ More
We present a question bank consisting of over 250 multiple-choice and true-false questions covering a broad range of material typically taught in an introductory undergraduate course in numerical analysis or scientific computing. The questions are ideal for polling students during lectures by means of a student response system that uses clicker remotes or smartphones running a suitable app. We describe our experiences implementing these clicker questions in a recent class and provide evidence of their effectiveness in terms of testing students' prior knowledge, gauging understanding of new material, increasing participation, and especially improving student satisfaction. Our conclusions are supported by a mid-semester student survey as well as anecdotal observations. The question bank has been released as an open-access educational resource under a Creative Commons license (BY-NC-SA) for free use by the mathematics community.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Simultaneous model calibration and source inversion in atmospheric dispersion models
Authors:
Juan G. Garcia,
Bamdad Hosseini,
John M Stockie
Abstract:
We present a cost-effective method for model calibration and solution of source inversion problems in atmospheric dispersion modelling. We use Gaussian process emulations of atmospheric dispersion models within a Bayesian framework for solution of inverse problems. The model and source parameters are treated as unknowns and we obtain point estimates and approximation of uncertainties for sources w…
▽ More
We present a cost-effective method for model calibration and solution of source inversion problems in atmospheric dispersion modelling. We use Gaussian process emulations of atmospheric dispersion models within a Bayesian framework for solution of inverse problems. The model and source parameters are treated as unknowns and we obtain point estimates and approximation of uncertainties for sources while simultaneously calibrating the forward model. The method is validated in the context of an industrial case study involving emissions from a smelting operation for which cumulative monthly measurements of zinc particulate depositions are available.
△ Less
Submitted 18 July, 2019; v1 submitted 14 June, 2018;
originally announced June 2018.
-
Asymptotic and numerical analysis of a porous medium model for transpiration-driven sap flow in trees
Authors:
Bebart Maisar Janbek,
John M. Stockie
Abstract:
We develop a 3D porous medium model for sap flow within a tree stem, which consists of a nonlinear parabolic partial differential equation with a suitable transpiration source term. Using an asymptotic analysis, we derive approximate series solutions for the liquid saturation and sap velocity for a general class of coefficient functions. Several important non-dimensional parameters are identified…
▽ More
We develop a 3D porous medium model for sap flow within a tree stem, which consists of a nonlinear parabolic partial differential equation with a suitable transpiration source term. Using an asymptotic analysis, we derive approximate series solutions for the liquid saturation and sap velocity for a general class of coefficient functions. Several important non-dimensional parameters are identified that can be used to characterize various flow regimes. We investigate the relative importance of stem aspect ratio versus anisotropy in the sapwood hydraulic conductivity, and how these two effects impact the radial and vertical components of sap velocity. The analytical results are validated by means of a second-order finite volume discretization of the governing equations, and comparisons are drawn to experimental results on Norway spruce trees.
△ Less
Submitted 17 June, 2017;
originally announced June 2017.
-
A two-scale Stefan problem arising in a model for tree sap exudation
Authors:
Isabell Konrad,
Malte A. Peter,
John M. Stockie
Abstract:
The study of tree sap exudation, in which a (leafless) tree generates elevated stem pressure in response to repeated daily freeze-thaw cycles, gives rise to an interesting multi-scale problem involving heat and multiphase liquid/gas transport. The pressure generation mechanism is a cellular-level process that is governed by differential equations for sap transport through porous cell membranes, ph…
▽ More
The study of tree sap exudation, in which a (leafless) tree generates elevated stem pressure in response to repeated daily freeze-thaw cycles, gives rise to an interesting multi-scale problem involving heat and multiphase liquid/gas transport. The pressure generation mechanism is a cellular-level process that is governed by differential equations for sap transport through porous cell membranes, phase change, heat transport, and generation of osmotic pressure. By assuming a periodic cellular structure based on an appropriate reference cell, we derive an homogenized heat equation governing the global temperature on the scale of the tree stem, with all the remaining physics relegated to equations defined on the reference cell. We derive a corresponding strong formulation of the limit problem and use it to design an efficient numerical solution algorithm. Numerical simulations are then performed to validate the results and draw conclusions regarding the phenomenon of sap exudation, which is of great importance in trees such as sugar maple and a few other related species. The particular form of our homogenized temperature equation is obtained using periodic homogenization techniques with two-scale convergence, which we investigate theoretically in the context of a simpler two-phase Stefan-type problem corresponding to a periodic array of melting cylindrical ice bars with a constant thermal diffusion coefficient. For this reduced model, we prove results on existence, uniqueness and convergence of the two-scale limit solution in the weak form, clearly identifying the missing pieces required to extend the proofs to the fully nonlinear sap exudation model. Numerical simulations of the reduced equations are then compared with results from the complete sap exudation model.
△ Less
Submitted 19 June, 2017; v1 submitted 31 October, 2016;
originally announced October 2016.
-
A Bayesian approach for energy-based estimation of acoustic aberrations in high intensity focused ultrasound treatment
Authors:
Bamdad Hosseini,
Charles Mougenot,
Samuel Pichardo,
Elodie Constanciel,
James M. Drake,
John M. Stockie
Abstract:
High intensity focused ultrasound is a non-invasive method for treatment of diseased tissue that uses a beam of ultrasound to generate heat within a small volume. A common challenge in application of this technique is that heterogeneity of the biological medium can defocus the ultrasound beam. Here we reduce the problem of refocusing the beam to the inverse problem of estimating the acoustic aberr…
▽ More
High intensity focused ultrasound is a non-invasive method for treatment of diseased tissue that uses a beam of ultrasound to generate heat within a small volume. A common challenge in application of this technique is that heterogeneity of the biological medium can defocus the ultrasound beam. Here we reduce the problem of refocusing the beam to the inverse problem of estimating the acoustic aberration due to the biological tissue from acoustic radiative force imaging data. We solve this inverse problem using a Bayesian framework with a hierarchical prior and solve the inverse problem using a Metropolis-within-Gibbs algorithm. The framework is tested using both synthetic and experimental datasets. We demonstrate that our approach has the ability to estimate the aberrations using small datasets, as little as 32 sonication tests, which can lead to significant speedup in the treatment process. Furthermore, our approach is compatible with a wide range of sonication tests and can be applied to other energy-based measurement techniques.
△ Less
Submitted 7 June, 2018; v1 submitted 24 February, 2016;
originally announced February 2016.
-
Multiscale model of a freeze-thaw process for tree sap exudation
Authors:
Isabell Graf,
Maurizio Ceseri,
John M. Stockie
Abstract:
Sap transport in trees has long fascinated scientists, and a vast literature exists on experimental and modelling studies of trees during the growing season when large negative stem pressures are generated by transpiration from leaves. Much less attention has been paid to winter months when trees are largely dormant but nonetheless continue to exhibit interesting flow behaviour. A prime example is…
▽ More
Sap transport in trees has long fascinated scientists, and a vast literature exists on experimental and modelling studies of trees during the growing season when large negative stem pressures are generated by transpiration from leaves. Much less attention has been paid to winter months when trees are largely dormant but nonetheless continue to exhibit interesting flow behaviour. A prime example is sap exudation, which refers to the peculiar ability of sugar maple (Acer saccharum) and related species to generate positive stem pressure while in a leafless state. Experiments demonstrate that ambient temperatures must oscillate about the freezing point before significantly heightened stem pressures are observed, but the precise causes of exudation remain unresolved. The prevailing hypothesis attributes exudation to a physical process combining freeze-thaw and osmosis, which has some support from experimental studies but remains a subject of active debate. We address this knowledge gap by develo** the first mathematical model for exudation, while also introducing several essential modifications to this hypothesis. We derive a multiscale model consisting of a nonlinear system of differential equations governing phase change and transport within wood cells, coupled to a suitably homogenized equation for temperature on the macroscale. Numerical simulations yield stem pressures that are consistent with experiments and provide convincing evidence that a purely physical mechanism is capable of capturing exudation.
△ Less
Submitted 19 September, 2015;
originally announced September 2015.
-
Multi-layer asymptotic solution for wetting fronts in porous media with exponential moisture diffusivity
Authors:
Christopher J. Budd,
John M. Stockie
Abstract:
We study the asymptotic behaviour of sharp front solutions arising from the nonlinear diffusion equation θ_t = (D(θ)θ_x)_x, where the diffusivity is an exponential function D(θ) = D_o exp(βθ). This problem arises for example in the study of unsaturated flow in porous media where θ represents the liquid saturation. For physical parameters corresponding to actual porous media, the diffusivity at the…
▽ More
We study the asymptotic behaviour of sharp front solutions arising from the nonlinear diffusion equation θ_t = (D(θ)θ_x)_x, where the diffusivity is an exponential function D(θ) = D_o exp(βθ). This problem arises for example in the study of unsaturated flow in porous media where θ represents the liquid saturation. For physical parameters corresponding to actual porous media, the diffusivity at the residual saturation is D(0) = D_o << 1 so that the diffusion problem is nearly degenerate. Such problems are characterised by wetting fronts that sharply delineate regions of saturated and unsaturated flow, and that propagate with a well-defined speed. Using matched asymptotic expansions in the limit of large β, we derive an analytical description of the solution that is uniformly valid throughout the wetting front. This is in contrast with most other related analyses that instead truncate the solution at some specific wetting front location, which is then calculated as part of the solution, and beyond that location the solution is undefined. Our asymptotic analysis demonstrates that the solution has a four-layer structure, and by matching through the adjacent layers we obtain an estimate of the wetting front location in terms of the material parameters describing the porous medium. Using numerical simulations of the original nonlinear diffusion equation, we demonstrate that the first few terms in our series solution provide approximations of physical quantities such as wetting front location and speed of propagation that are more accurate (over a wide range of admissible β values) than other asymptotic approximations reported in the literature.
△ Less
Submitted 26 November, 2015; v1 submitted 27 May, 2015;
originally announced May 2015.
-
An immersed boundary model of the cochlea with parametric forcing
Authors:
William Ko,
John M. Stockie
Abstract:
The cochlea or inner ear has a remarkable ability to amplify sound signals. This is understood to derive at least in part from some active process that magnifies vibrations of the basilar membrane (BM) and the cochlear partition in which it is embedded, to the extent that it overcomes the effect of viscous dam** from the surrounding cochlear fluid. Many authors have associated this amplification…
▽ More
The cochlea or inner ear has a remarkable ability to amplify sound signals. This is understood to derive at least in part from some active process that magnifies vibrations of the basilar membrane (BM) and the cochlear partition in which it is embedded, to the extent that it overcomes the effect of viscous dam** from the surrounding cochlear fluid. Many authors have associated this amplification ability to some type of mechanical resonance within the cochlea, however there is still no consensus regarding the precise cause of amplification. Our work is inspired by experiments showing that the outer hair cells within the cochlear partition change their lengths when stimulated, which can in turn cause periodic distortions of the BM and other structures in the cochlea. This paper investigates a novel fluid-mechanical resonance mechanism that derives from hydrodynamic interactions between an oscillating BM and the surrounding cochlear fluid. We present a model of the cochlea based on the immersed boundary method, in which a small-amplitude periodic internal forcing due to outer hair cells can induce parametric resonance. A Floquet stability analysis of the linearized equations demonstrates the existence of resonant (unstable) solutions within the range of physical parameters corresponding to the human auditory system. Numerical simulations of the immersed boundary equations support the analytical results and clearly demonstrate the existence of resonant solution modes. These results are then used to illustrate the influence of parametric resonance on wave propagation along the BM and explicit comparisons are drawn with results from another two-dimensional cochlea model.
△ Less
Submitted 25 March, 2015;
originally announced March 2015.
-
Simulating biofilm deformation and detachment with the immersed boundary method
Authors:
Rangarajan Sudarsan,
Sudeshna Ghosh,
John M. Stockie,
Hermann J. Eberl
Abstract:
We apply the immersed boundary (or IB) method to simulate deformation and detachment of a periodic array of wall-bounded biofilm colonies in response to a linear shear flow. The biofilm material is represented as a network of Hookean springs that are placed along the edges of a triangulation of the biofilm region. The interfacial shear stress, lift and drag forces acting on the biofilm colony are…
▽ More
We apply the immersed boundary (or IB) method to simulate deformation and detachment of a periodic array of wall-bounded biofilm colonies in response to a linear shear flow. The biofilm material is represented as a network of Hookean springs that are placed along the edges of a triangulation of the biofilm region. The interfacial shear stress, lift and drag forces acting on the biofilm colony are computed by using fluid stress jump method developed by Williams, Fauci and Gaver [Disc. Contin. Dyn. Sys. B 11(2):519-540, 2009], with a modified version of their exclusion filter. Our detachment criterion is based on the novel concept of an averaged equivalent continuum stress tensor defined at each IB point in the biofilm which is then used to determine a corresponding von Mises yield stress; wherever this yield stress exceeds a given critical threshold the connections to that node are severed, thereby signalling the onset of a detachment event. In order to capture the deformation and detachment behaviour of a biofilm colony at different stages of growth, we consider a family of four biofilm shapes with varying aspect ratio. Our numerical simulations focus on the behaviour of weak biofilms (with relatively low yield stress threshold) and investigate features of the fluid-structure interaction such as locations of maximum shear and increased drag. The most important conclusion of this work is that the commonly employed detachment strategy in biofilm models based only on interfacial shear stress can lead to incorrect or inaccurate results when applied to the study of shear induced detachment of weak biofilms. Our detachment strategy based on equivalent continuum stresses provides a unified and consistent IB framework that handles both sloughing and erosion modes of biofilm detachment, and is consistent with strategies employed in many other continuum based biofilm models.
△ Less
Submitted 28 January, 2015;
originally announced January 2015.
-
Parametric resonance in spherical immersed elastic shells
Authors:
William Ko,
John M. Stockie
Abstract:
We perform a stability analysis for a fluid-structure interaction problem in which a spherical elastic shell or membrane is immersed in a 3D viscous, incompressible fluid. The shell is an idealised structure having zero thickness, and has the same fluid lying both inside and outside. The problem is formulated mathematically using the immersed boundary framework in which Dirac delta functions are e…
▽ More
We perform a stability analysis for a fluid-structure interaction problem in which a spherical elastic shell or membrane is immersed in a 3D viscous, incompressible fluid. The shell is an idealised structure having zero thickness, and has the same fluid lying both inside and outside. The problem is formulated mathematically using the immersed boundary framework in which Dirac delta functions are employed to capture the two-way interaction between fluid and immersed structure. The elastic structure is driven parametrically via a time-periodic modulation of the elastic membrane stiffness. We perform a Floquet stability analysis, considering the case of both a viscous and inviscid fluid, and demonstrate that the forced fluid-membrane system gives rise to parametric resonances in which the solution becomes unbounded even in the presence of viscosity. The analytical results are validated using numerical simulations with a 3D immersed boundary code for a range of wavenumbers and physical parameter values. Finally, potential applications to biological systems are discussed, with a particular focus on the human heart and investigating whether or not fluid-structure interaction-mediated instabilities could play a role in cardiac fluid dynamics.
△ Less
Submitted 5 November, 2014;
originally announced November 2014.
-
Simulating flexible fiber suspensions using a scalable immersed boundary algorithm
Authors:
Jeffrey K. Wiens,
John M. Stockie
Abstract:
We present an approach for numerically simulating the dynamics of flexible fibers in a three-dimensional shear flow using a scalable immersed boundary (IB) algorithm based on Guermond and Minev's pseudo-compressible fluid solver. The fibers are treated as one-dimensional Kirchhoff rods that resist stretching, bending, and twisting, within the generalized IB framework. We perform a careful numerica…
▽ More
We present an approach for numerically simulating the dynamics of flexible fibers in a three-dimensional shear flow using a scalable immersed boundary (IB) algorithm based on Guermond and Minev's pseudo-compressible fluid solver. The fibers are treated as one-dimensional Kirchhoff rods that resist stretching, bending, and twisting, within the generalized IB framework. We perform a careful numerical comparison against experiments on single fibers performed by S. G. Mason and co-workers, who categorized the fiber dynamics into several distinct orbit classes. We show that the orbit class may be determined using a single dimensionless parameter for low Reynolds flows. Lastly, we simulate dilute suspensions containing up to hundreds of fibers using a distributed- memory computer cluster. These simulations serve as a step** stone for studying more complex suspension dynamics including non-dilute suspensions and aggregation of fibers (also known as flocculation).
△ Less
Submitted 28 July, 2014;
originally announced July 2014.
-
An efficient parallel immersed boundary algorithm using a pseudo-compressible fluid solver
Authors:
Jeffrey K. Wiens,
John M. Stockie
Abstract:
We propose an efficient algorithm for the immersed boundary method on distributed-memory architectures, with the computational complexity of a completely explicit method and excellent parallel scaling. The algorithm utilizes the pseudo-compressibility method recently proposed by Guermond and Minev [Comptes Rendus Mathematique, 348:581-585, 2010] that uses a directional splitting strategy to discre…
▽ More
We propose an efficient algorithm for the immersed boundary method on distributed-memory architectures, with the computational complexity of a completely explicit method and excellent parallel scaling. The algorithm utilizes the pseudo-compressibility method recently proposed by Guermond and Minev [Comptes Rendus Mathematique, 348:581-585, 2010] that uses a directional splitting strategy to discretize the incompressible Navier-Stokes equations, thereby reducing the linear systems to a series of one-dimensional tridiagonal systems. We perform numerical simulations of several fluid-structure interaction problems in two and three dimensions and study the accuracy and convergence rates of the proposed algorithm. For these problems, we compare the proposed algorithm against other second-order projection-based fluid solvers. Lastly, the strong and weak scaling properties of the proposed algorithm are investigated.
△ Less
Submitted 19 May, 2014; v1 submitted 17 May, 2013;
originally announced May 2013.
-
Numerical simulations of particle sedimentation using the immersed boundary method
Authors:
Sudeshna Ghosh,
John M. Stockie
Abstract:
We study the settling of solid particles within a viscous incompressible fluid contained in a two-dimensional channel, where the mass density of the particles is slightly greater than that of the fluid. The fluid-structure interaction problem is simulated numerically using the immersed boundary method, with an added mass term that is incorporated using a Boussinesq approximation. Simulations are p…
▽ More
We study the settling of solid particles within a viscous incompressible fluid contained in a two-dimensional channel, where the mass density of the particles is slightly greater than that of the fluid. The fluid-structure interaction problem is simulated numerically using the immersed boundary method, with an added mass term that is incorporated using a Boussinesq approximation. Simulations are performed with a single circular particle, and also with two particles in various initial configurations. The terminal settling velocities for the particles correspond closely with both theoretical and experimental results, and the single-particle dynamics reproduce expected behavior qualitatively. The two-particle simulations exhibit drafting-kissing-tumbling dynamics that is similar to what is observed in other experimental and numerical studies.
△ Less
Submitted 7 November, 2013; v1 submitted 2 April, 2013;
originally announced April 2013.
-
A mathematical model of sap exudation in maple trees governed by ice melting, gas dissolution and osmosis
Authors:
Maurizio Ceseri,
John M. Stockie
Abstract:
We develop a mathematical model for sap exudation in a maple tree that is based on a purely physical mechanism for internal pressure generation in trees in the leafless state. There has been a long-standing controversy in the tree physiology literature over precisely what mechanism drives sap exudation, and we aim to cast light on this issue. Our model is based on the work of Milburn and O'Malley…
▽ More
We develop a mathematical model for sap exudation in a maple tree that is based on a purely physical mechanism for internal pressure generation in trees in the leafless state. There has been a long-standing controversy in the tree physiology literature over precisely what mechanism drives sap exudation, and we aim to cast light on this issue. Our model is based on the work of Milburn and O'Malley [Can. J. Bot., 62(10):2101-2106, 1984] who hypothesized that elevated sap pressures derive from compressed gas that is trapped within certain wood cells and subsequently released when frozen sap thaws in the spring. We also incorporate the extension of Tyree [in Tree Sap, pp. 37-45, eds. M. Terazawa et al., Hokkaido Univ. Press, 1995] who argued that gas bubbles are prevented from dissolving because of osmotic pressure that derives from differences in sap sugar concentrations and the selective permeability of cell walls. We derive a system of differential-algebraic equations based on conservation principles that is used to test the validity of the Milburn-O'Malley hypothesis and also to determine the extent to which osmosis is required. This work represents the first attempt to derive a detailed mathematical model of sap exudation at the micro-scale.
△ Less
Submitted 20 November, 2012;
originally announced November 2012.
-
Correction to "Parametric Resonance in Immersed Elastic Boundaries"
Authors:
William Ko,
John M. Stockie
Abstract:
This note is a correction to a paper of Cortez, Peskin, Stockie & Varela [SIAM J. Appl. Math., 65(2):494-520, 2004], who studied the stability of a parametrically-forced, circular, elastic fiber immersed in an incompressible fluid in 2D, and showed the existence of parametric resonance. The results were represented as plots that separate parameter space into regions where the solution is either st…
▽ More
This note is a correction to a paper of Cortez, Peskin, Stockie & Varela [SIAM J. Appl. Math., 65(2):494-520, 2004], who studied the stability of a parametrically-forced, circular, elastic fiber immersed in an incompressible fluid in 2D, and showed the existence of parametric resonance. The results were represented as plots that separate parameter space into regions where the solution is either stable or unstable. We uncovered two errors in the paper: the first was in the derivation of the eigenvalue problem, and the second was in the code to used to calculate the stability contours.
△ Less
Submitted 5 November, 2014; v1 submitted 19 July, 2012;
originally announced July 2012.
-
Riemann solver for a kinematic wave traffic model with discontinuous flux
Authors:
Jeffrey K. Wiens,
John M. Stockie,
JF Williams
Abstract:
We investigate a model for traffic flow based on the Lighthill-Whitham-Richards model that consists of a hyperbolic conservation law with a discontinuous, piecewise-linear flux. A mollifier is used to smooth out the discontinuity in the flux function over a small distance epsilon << 1 and then the analytical solution to the corresponding Riemann problem is derived in the limit as epsilon goes to 0…
▽ More
We investigate a model for traffic flow based on the Lighthill-Whitham-Richards model that consists of a hyperbolic conservation law with a discontinuous, piecewise-linear flux. A mollifier is used to smooth out the discontinuity in the flux function over a small distance epsilon << 1 and then the analytical solution to the corresponding Riemann problem is derived in the limit as epsilon goes to 0. For certain initial data, the Riemann problem can give rise to zero waves that propagate with infinite speed but have zero strength. We propose a Godunov-type numerical scheme that avoids the otherwise severely restrictive CFL constraint that would arise from waves with infinite speed by exchanging information between local Riemann problems and thereby incorporating the effects of zero waves directly into the Riemann solver. Numerical simulations are provided to illustrate the behaviour of zero waves and their impact on the solution. The effectiveness of our approach is demonstrated through a careful convergence study and comparisons to computations using a third-order WENO scheme.
△ Less
Submitted 3 November, 2012; v1 submitted 23 December, 2011;
originally announced December 2011.
-
Numerical Simulations of Gravity-Driven Fingering in Unsaturated Porous Media Using a Non-Equilibrium Model
Authors:
Michael Chapwanya,
John M. Stockie
Abstract:
This is a computational study of gravity-driven fingering instabilities in unsaturated porous media. The governing equations and corresponding numerical scheme are based on the work of Nieber et al. [Ch. 23 in Soil Water Repellency, eds. C. J. Ritsema and L. W. Dekker, Elsevier, 2003] in which non-monotonic saturation profiles are obtained by supplementing the Richards equation with a non-equilibr…
▽ More
This is a computational study of gravity-driven fingering instabilities in unsaturated porous media. The governing equations and corresponding numerical scheme are based on the work of Nieber et al. [Ch. 23 in Soil Water Repellency, eds. C. J. Ritsema and L. W. Dekker, Elsevier, 2003] in which non-monotonic saturation profiles are obtained by supplementing the Richards equation with a non-equilibrium capillary pressure-saturation relationship, as well as including hysteretic effects. The first part of the study takes an extensive look at the sensitivity of the finger solutions to certain key parameters in the model such as capillary shape parameter, initial saturation, and capillary relaxation coefficient. The second part is a comparison to published experimental results that demonstrates the ability of the model to capture realistic fingering behaviour.
△ Less
Submitted 18 May, 2010;
originally announced May 2010.
-
An inverse Gaussian plume approach for estimating atmospheric pollutant emissions from multiple point sources
Authors:
Enkeleida Lushi,
John M. Stockie
Abstract:
A method is developed for estimating the emission rates of contaminants into the atmosphere from multiple point sources using measurements of particulate material deposited at ground level. The approach is based on a Gaussian plume type solution for the advection-diffusion equation with ground-level deposition and given emission sources. This solution to the forward problem is incorporated into…
▽ More
A method is developed for estimating the emission rates of contaminants into the atmosphere from multiple point sources using measurements of particulate material deposited at ground level. The approach is based on a Gaussian plume type solution for the advection-diffusion equation with ground-level deposition and given emission sources. This solution to the forward problem is incorporated into an inverse algorithm for estimating the emission rates by means of a linear least squares approach. The results are validated using measured deposition and meteorological data from a large lead-zinc smelting operation in Trail, British Columbia. The algorithm is demonstrated to be robust and capable of generating reasonably accurate estimates of total contaminant emissions over the relatively short distances of interest in this study.
△ Less
Submitted 11 August, 2009;
originally announced August 2009.
-
A model for reactive porous transport during re-wetting of hardened concrete
Authors:
Michael Chapwanya,
Wentao Liu,
John M. Stockie
Abstract:
A mathematical model is developed that captures the transport of liquid water in hardened concrete, as well as the chemical reactions that occur between the imbibed water and the residual calcium silicate compounds residing in the porous concrete matrix. The main hypothesis in this model is that the reaction product -- calcium silicate hydrate gel -- clogs the pores within the concrete thereby h…
▽ More
A mathematical model is developed that captures the transport of liquid water in hardened concrete, as well as the chemical reactions that occur between the imbibed water and the residual calcium silicate compounds residing in the porous concrete matrix. The main hypothesis in this model is that the reaction product -- calcium silicate hydrate gel -- clogs the pores within the concrete thereby hindering water transport. Numerical simulations are employed to determine the sensitivity of the model solution to changes in various physical parameters, and compare to experimental results available in the literature.
△ Less
Submitted 1 January, 2009; v1 submitted 19 January, 2008;
originally announced January 2008.