Showing 1–23 of 23 results for author: Stern, A

New Horizons Venetia Burney Student Dust Counter Observes Higher than Expected Fluxes Approaching 60 AU

Authors: Alex Doner, Mihaly Horanyi, Fran Bagenal, Pontus Brandt, Will Grundy, Carey Lisse, Joel Parker, Andrew R. Poppe, Kelsi N. Singer, S. Alan Stern, Anne Verbiscer

Abstract: The NASA New Horizons Venetia Burney Student Dust Counter (SDC) measures dust particle impacts along the spacecraft's flight path for grains with mass $\ge$ $10^{-12}$ g, map** out their spatial density distribution. We present the latest SDC dust density, size distribution, and flux measurements through 55 au and compare them to numerical model predictions. Kuiper Belt Objects (KBOs) are though… ▽ More The NASA New Horizons Venetia Burney Student Dust Counter (SDC) measures dust particle impacts along the spacecraft's flight path for grains with mass $\ge$ $10^{-12}$ g, map** out their spatial density distribution. We present the latest SDC dust density, size distribution, and flux measurements through 55 au and compare them to numerical model predictions. Kuiper Belt Objects (KBOs) are thought to be the dominant source of interplanetary dust particles (IDP) in the outer solar system due to both collisions between KBOs, and their continual bombardment by interstellar dust particles (ISD). Continued measurements through 55 au show higher than model-predicted dust fluxes as New Horizons approaches the putative outer edge of the Kuiper Belt (KB). We discuss potential explanations for the growing deviation: radiation pressure stretches the dust distribution to further heliocentric distances than its parent body distribution; icy dust grains undergo photo-sputtering that rapidly increases their response to radiation pressure forces and pushes them further away from the sun; and the distribution of KBOs may extend much further than existing observations suggest. Ongoing SDC measurements at even larger heliocentric distances will continue to constrain the contributions of dust production in the KB. Continued SDC measurements remain crucial for understanding the Kuiper Belt and the interpretation of observations of dust disks around other stars. △ Less

Submitted 2 January, 2024; originally announced January 2024.

Comments: 9 pages, 5 figures, accepted for publication in APJL

Scalable architecture for trapped-ion quantum computing using RF traps and dynamic optical potentials

Authors: David Schwerdt, Lee Peleg, Yotam Shapira, Nadav Priel, Yanay Florshaim, Avram Gross, Ayelet Zalic, Gadi Afek, Nitzan Akerman, Ady Stern, Amit Ben Kish, Roee Ozeri

Abstract: Qubits based on ions trapped in linear radio-frequency traps form a successful platform for quantum computing, due to their high fidelity of operations, all-to-all connectivity and degree of local control. In principle there is no fundamental limit to the number of ion-based qubits that can be confined in a single 1D register. However, in practice there are two main issues associated with long tra… ▽ More Qubits based on ions trapped in linear radio-frequency traps form a successful platform for quantum computing, due to their high fidelity of operations, all-to-all connectivity and degree of local control. In principle there is no fundamental limit to the number of ion-based qubits that can be confined in a single 1D register. However, in practice there are two main issues associated with long trapped-ion crystals, that stem from the 'softening' of their modes of motion, upon scaling up: high heating rates of the ions' motion, and a dense motional spectrum; both impede the performance of high-fidelity qubit operations. Here we propose a holistic, scalable architecture for quantum computing with large ion-crystals that overcomes these issues. Our method relies on dynamically-operated optical potentials, that instantaneously segment the ion-crystal into cells of a manageable size. We show that these cells behave as nearly independent quantum registers, allowing for parallel entangling gates on all cells. The ability to reconfigure the optical potentials guarantees connectivity across the full ion-crystal, and also enables efficient mid-circuit measurements. We study the implementation of large-scale parallel multi-qubit entangling gates that operate simultaneously on all cells, and present a protocol to compensate for crosstalk errors, enabling full-scale usage of an extensively large register. We illustrate that this architecture is advantageous both for fault-tolerant digital quantum computation and for analog quantum simulations. △ Less

Submitted 8 January, 2024; v1 submitted 2 November, 2023; originally announced November 2023.

Spatial adiabatic passage of ultracold atoms in optical tweezers

Authors: Yanay Florshaim, Elad Zohar, David Zeev Koplovich, Ilan Meltzer, Rafi Weill, Jonathan Nemirovsky, Amir Stern, Yoav Sagi

Abstract: Spatial adiabatic passage (SAP) is a process that facilitates the transfer of a wave packet between two localized modes that are not directly coupled, but rather interact through an intermediate third mode. By employing a counter-intuitive adiabatic pulse sequence, this technique achieves minimal population in the intermediate state and high transfer efficiency. Here, we report the implementation… ▽ More Spatial adiabatic passage (SAP) is a process that facilitates the transfer of a wave packet between two localized modes that are not directly coupled, but rather interact through an intermediate third mode. By employing a counter-intuitive adiabatic pulse sequence, this technique achieves minimal population in the intermediate state and high transfer efficiency. Here, we report the implementation of SAP for transferring massive particles between three micro-optical traps. We begin by preparing ultracold fermionic atoms in low vibrational eigenstates of one trap and then manipulate the distance between the three traps to execute the SAP protocol. We observe a smooth transfer of atoms between the two outer traps, accompanied by a low population in the central trap. We validate our findings and underscore the significance of the counter-intuitive sequence by reversing the order of the pulse sequence. Additionally, we investigate the influence of the tunneling rate and the time delay between the motion of the two external tweezers on the fidelity of the process. Our results open up new possibilities for advanced control and manipulation schemes in optical tweezer array platforms. △ Less

Submitted 25 May, 2023; originally announced May 2023.

Comments: 6 pages, 4 figures

In-vacuum microwave resonator for a compact cold atom frequency standard

Authors: M. Givon, L. Habib, A. Waxman, Y. Bar-Haim, O. Amit, Y. Cina, G. Boneh, D. Groswasser, T. David, B. Levy, A. Stern, R. Folman

Abstract: A physics package for a compact cold atomic clock is hereby presented. The uniqueness of this package is its small dimensions that enable, for the first time, implementation of a primary cold atomic clock in a standard package of 3U height (=133mm). These dimensions are made possible by using an in-vacuum Microwave (MW) Loop Gap Resonator (LGR) whose length and diameter can be reduced from those o… ▽ More A physics package for a compact cold atomic clock is hereby presented. The uniqueness of this package is its small dimensions that enable, for the first time, implementation of a primary cold atomic clock in a standard package of 3U height (=133mm). These dimensions are made possible by using an in-vacuum Microwave (MW) Loop Gap Resonator (LGR) whose length and diameter can be reduced from those of a typical resonator. Following our presentation of the design, we analyze the homogeneity of the MW field amplitude and phase. We find that the expected clock instability due to non-uniformity of the MW field is $\sim1.5\cdot10^{-14}$/day. Adding other clock errors, we estimate the total uncertainty of a cold atomic clock of this design will be around $\sim2\cdot10^{-14}$/day which results in a time drift of a few nanoseconds/day. Such a clock can serve as a primary-grade frequency reference, and may replace the cesium beam atomic clock and the GPS-disciplined rubidium atomic clocks. △ Less

Submitted 18 August, 2022; originally announced August 2022.

Degenerate Raman sideband cooling of 40K atoms

Authors: Elad Zohar, Yanay Florshaim, Oded Zilberman, Amir Stern, Yoav Sagi

Abstract: We report on the implementation of degenerate Raman sideband cooling of $^{40}$K atoms. The scheme incorporates a 3D optical lattice, which confines the atoms and drives the Raman transitions. The optical cooling cycle is closed by two optical pum** beams. The wavelength of the laser beams forming the lattice is close to the D$_2$ atomic transition, while the optical pum** is operated near the… ▽ More We report on the implementation of degenerate Raman sideband cooling of $^{40}$K atoms. The scheme incorporates a 3D optical lattice, which confines the atoms and drives the Raman transitions. The optical cooling cycle is closed by two optical pum** beams. The wavelength of the laser beams forming the lattice is close to the D$_2$ atomic transition, while the optical pum** is operated near the D$_1$ transition. With this cooling method, we achieve temperature of $\sim$$1μ$K of a cloud with $\sim$$10^7$ atoms. This corresponds to a phase space density of $\ge$$10^{-3}$. Moreover, the fermionic ensemble is spin polarized to conditions which are favorable for subsequent evaporative cooling. We study the dependence of the cooling scheme on several parameters, including the applied magnetic field, the detuning, duration, and intensity profile of the optical pum** beams. Adding this optical cooling stage to current Fermi gas experiments can improve the final conditions and increase the data rate. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Comments: 7 pages, 7 figures

Moons Are Planets: Scientific Usefulness Versus Cultural Teleology in the Taxonomy of Planetary Science

Authors: Philip T. Metzger, William M. Grundy, Mark Sykes, S. Alan Stern, James F. Bell III, Charlene E. Detelich, Kirby D. Runyon, Michael Summers

Abstract: We argue that taxonomical concept development is vital for planetary science as in all branches of science, but its importance has been obscured by unique historical developments. The literature shows that the concept of planet developed by scientists during the Copernican Revolution was theory-laden and pragmatic for science. It included both primaries and satellites as planets due to their commo… ▽ More We argue that taxonomical concept development is vital for planetary science as in all branches of science, but its importance has been obscured by unique historical developments. The literature shows that the concept of planet developed by scientists during the Copernican Revolution was theory-laden and pragmatic for science. It included both primaries and satellites as planets due to their common intrinsic, geological characteristics. About two centuries later the non-scientific public had just adopted heliocentrism and was motivated to preserve elements of geocentrism including teleology and the assumptions of astrology. This motivated development of a folk concept of planet that contradicted the scientific view. The folk taxonomy was based on what an object orbits, making satellites out to be non-planets and ignoring most asteroids. Astronomers continued to keep primaries and moons classed together as planets and continued teaching that taxonomy until the 1920s. The astronomical community lost interest in planets ca. 1910 to 1955 and during that period complacently accepted the folk concept. Enough time has now elapsed so that modern astronomers forgot this history and rewrote it to claim that the folk taxonomy is the one that was created by the Copernican scientists. Starting ca. 1960 when spacecraft missions were developed to send back detailed new data, there was an explosion of publishing about planets including the satellites, leading to revival of the Copernican planet concept. We present evidence that taxonomical alignment with geological complexity is the most useful scientific taxonomy for planets. It is this complexity of both primary and secondary planets that is a key part of the chain of origins for life in the cosmos. △ Less

Submitted 22 October, 2021; originally announced October 2021.

Comments: 68 pages, 16 figures. For supplemental data files, see https://www.philipmetzger.com/moons_are_planets/

Morphological Comparison of Blocks in Chaos Terrains on Pluto, Europa, and Mars

Authors: Helle L. Skjetne, Kelsi N. Singer, Brian M. Hynek, Katie I. Knight, Paul M. Schenk, Cathy B. Olkin, Oliver L. White, Tanguy Bertrand, Kirby D. Runyon, William B. McKinnon, Jeffrey M. Moore, S. Alan Stern, Harold A. Weaver, Leslie A. Young, Kim Ennico

Abstract: Chaos terrains are characterized by disruption of preexisting surfaces into irregularly arranged mountain blocks with a chaotic appearance. Several models for chaos formation have been proposed, but the formation and evolution of this enigmatic terrain type has not yet been fully constrained. We provide extensive map** of the individual blocks that make up different chaos landscapes, and present… ▽ More Chaos terrains are characterized by disruption of preexisting surfaces into irregularly arranged mountain blocks with a chaotic appearance. Several models for chaos formation have been proposed, but the formation and evolution of this enigmatic terrain type has not yet been fully constrained. We provide extensive map** of the individual blocks that make up different chaos landscapes, and present a morphological comparison of chaotic terrains found on Pluto, Jupiter's moon Europa, and Mars, using measurements of diameter, height, and axial ratio of chaotic mountain blocks. Additionally, we compare mountain blocks in chaotic terrain and fretted terrain on Mars. We find a positive linear relationship between the size and height of chaos blocks on Pluto and Mars, whereas blocks on Europa exhibit a flat trend as block height does not generally increase with increasing block size. Block heights on Pluto are used to estimate the block root depths if they were floating icebergs. Block heights on Europa are used to infer the total thickness of the icy layer from which the blocks formed. Finally, block heights on Mars are compared to potential layer thicknesses of near-surface material. We propose that the heights of chaotic mountain blocks on Pluto, Europa, and Mars can be used to infer information about crustal lithology and surface layer thickness. △ Less

Submitted 24 April, 2021; originally announced April 2021.

Comments: 45 pages, 3 tables, 9 figures, 5 appendices

Journal ref: Icarus (New York, N.Y. 1962), pp. 113866 (2020)

Quantum simulations with complex geometries and synthetic gauge fields in a trapped ion chain

Authors: Tom Manovitz, Yotam Shapira, Nitzan Akerman, Ady Stern, Roee Ozeri

Abstract: In recent years, arrays of atomic ions in a linear RF trap have proven to be a particularly successful platform for quantum simulation. However, a wide range of quantum models and phenomena have, so far, remained beyond the reach of such simulators. In this work we introduce a technique that can substantially extend this reach using an external field gradient along the ion chain and a global, unif… ▽ More In recent years, arrays of atomic ions in a linear RF trap have proven to be a particularly successful platform for quantum simulation. However, a wide range of quantum models and phenomena have, so far, remained beyond the reach of such simulators. In this work we introduce a technique that can substantially extend this reach using an external field gradient along the ion chain and a global, uniform driving field. The technique can be used to generate both static and time-varying synthetic gauge fields in a linear chain of trapped ions, and enables continuous simulation of a variety of coupling geometries and topologies, including periodic boundary conditions and high dimensional Hamiltonians. We describe the technique, derive the corresponding effective Hamiltonian, propose a number of variations, and discuss the possibility of scaling to quantum-advantage sized simulators. Additionally, we suggest several possible implementations and briefly examine two: the Aharonov-Bohm ring and the frustrated triangular ladder. △ Less

Submitted 4 July, 2020; originally announced July 2020.

Journal ref: PRX Quantum 1, 020303 (2020)

Rigid platform for applying large tunable strains to mechanically delicate samples

Authors: Joonbum Park, Jack M. Bartlett, Hilary M. L. Noad, Alexander Stern, Mark E. Barber, Markus König, Suguru Hosoi, Takasada Shibauchi, Andrew P. Mackenzie, Alexander Steppke, Clifford W. Hicks

Abstract: Response to uniaxial stress has become a major probe of electronic materials. Tuneable uniaxial stress may be applied using piezoelectric actuators, and so far two methods have been developed to couple samples to actuators. In one, actuators apply force along the length of a free, beam-like sample, allowing very large strains to be achieved. In the other, samples are affixed directly to piezoelect… ▽ More Response to uniaxial stress has become a major probe of electronic materials. Tuneable uniaxial stress may be applied using piezoelectric actuators, and so far two methods have been developed to couple samples to actuators. In one, actuators apply force along the length of a free, beam-like sample, allowing very large strains to be achieved. In the other, samples are affixed directly to piezoelectric actuators, allowing study of mechanically delicate materials. Here, we describe an approach that merges the two: thin samples are affixed to a substrate, that is then pressurized uniaxially using piezoelectric actuators. Using this approach, we demonstrate application of large elastic strains to mechanically delicate samples: the van der Waals-bonded material FeSe, and a sample of CeAuSb$_2$ that was shaped with a focused ion beam. △ Less

Submitted 25 March, 2020; originally announced March 2020.

Comments: 11 pages, 9 figures

Theory of robust multi-qubit non-adiabatic gates for trapped-ions

Authors: Yotam Shapira, Ravid Shaniv, Tom Manovitz, Nitzan Akerman, Lee Peleg, Lior Gazit, Roee Ozeri, Ady Stern

Abstract: The prevalent approach to executing quantum algorithms on quantum computers is to break-down the algorithms to a concatenation of universal gates, typically single and two-qubit gates. However such a decomposition results in long gate sequences which are exponential in the qubit register size. Furthermore, gate fidelities tend to decrease when acting in larger qubit registers. Thus high-fidelity i… ▽ More The prevalent approach to executing quantum algorithms on quantum computers is to break-down the algorithms to a concatenation of universal gates, typically single and two-qubit gates. However such a decomposition results in long gate sequences which are exponential in the qubit register size. Furthermore, gate fidelities tend to decrease when acting in larger qubit registers. Thus high-fidelity implementations in large qubit registers is still a prominent challenge. Here we propose and investigate multi-qubit entangling gates for trapped-ions. Our gates couple many qubits at once, allowing to decrease the total number of gates used while retaining a high gate fidelity. Our method employs all of the normal-modes of motion of the ion chain, which allows to operate outside of the adiabatic regime and at rates comparable to the secular ion-trap** frequency. Furthermore we extend our method for generating Hamiltonians which are suitable for quantum analog simulations, such as a nearest-neighbour spin Hamiltonian or the Su-Schrieffer-Heeger Hamiltonian. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Comments: 10+5 pages, 8 figures

Journal ref: Phys. Rev. A 101, 032330 (2020)

Measuring magnetic fields with magnetic field insensitive transitions

Authors: Yotam Shapira, Yehonatan Dallal, Roee Ozeri, Ady Stern

Abstract: Magnetometry is an important tool prevalent in many applications such as fundamental research, material characterization and biological imaging. Atomic magnetometry conventionally makes use of two quantum states, the energy difference of which depends linearly on the magnetic field due to the Zeeman effect. The magnetic field is evaluated from repeated measurements of the accumulated dynamic phase… ▽ More Magnetometry is an important tool prevalent in many applications such as fundamental research, material characterization and biological imaging. Atomic magnetometry conventionally makes use of two quantum states, the energy difference of which depends linearly on the magnetic field due to the Zeeman effect. The magnetic field is evaluated from repeated measurements of the accumulated dynamic phase between the two Zeeman states in a superposition. Here we propose a magnetometry method that employs a superposition of clock states with energies that do not depend, to first-order, on the magnetic field magnitude. Our method makes use of the geometrical dependence of the clock-states wavefunctions on the magnetic field orientation. We propose detailed schemes for measuring both static and time-varying magnetic fields, and analyze the sensitivity of these methods. We show that, similarly to Zeeman-based methods, the smallest measurable signal scales inversely with the system coherence-time, which for clock transitions is typically significantly longer than for magnetically sensitive transitions. Finally, we experimentally demonstrate our method on an ensemble of optically trapped 87Rb atoms. △ Less

Submitted 6 February, 2019; originally announced February 2019.

Comments: 10+5 pages, 4+5 figures

Journal ref: Phys. Rev. Lett. 123, 133204 (2019)

In Situ Observations of Preferential Pickup Ion Heating at an Interplanetary Shock

Authors: E. J. Zirnstein, D. J. McComas, R. Kumar, H. A. Elliott, J. R. Szalay, C. B. Olkin, J. Spencer, S. A. Stern, L. A. Young

Abstract: Non-thermal pickup ions (PUIs) are created in the solar wind (SW) by charge-exchange between SW ions (SWIs) and slow interstellar neutral atoms. It has long been theorized, but not directly observed, that PUIs should be preferentially heated at quasi-perpendicular shocks compared to thermal SWIs. We present in situ observations of interstellar hydrogen (H+) PUIs at an interplanetary shock by the N… ▽ More Non-thermal pickup ions (PUIs) are created in the solar wind (SW) by charge-exchange between SW ions (SWIs) and slow interstellar neutral atoms. It has long been theorized, but not directly observed, that PUIs should be preferentially heated at quasi-perpendicular shocks compared to thermal SWIs. We present in situ observations of interstellar hydrogen (H+) PUIs at an interplanetary shock by the New Horizons' Solar Wind Around Pluto (SWAP) instrument at ~34 au from the Sun. At this shock, H+ PUIs are only a few percent of the total proton density but contain most of the internal particle pressure. A gradual reduction in SW flow speed and simultaneous heating of H+ SWIs is observed ahead of the shock, suggesting an upstream energetic particle pressure gradient. H+ SWIs lose ~85% of their energy flux across the shock and H+ PUIs are preferentially heated. Moreover, a PUI tail is observed downstream of the shock, such that the energy flux of all H+ PUIs is approximately six times that of H+ SWIs. We find that H+ PUIs, including their suprathermal tail, contain almost half of the total downstream energy flux in the shock frame. △ Less

Submitted 13 July, 2018; originally announced July 2018.

Comments: 11 pages, 4 figures, accepted for publication in Physical Review Letters

The Reclassification of Asteroids from Planets to Non-Planets

Authors: Philip T. Metzger, Mark V. Sykes, Alan Stern, Kirby Runyon

Abstract: It is often claimed that asteroids' sharing of orbits is the reason they were re-classified from planets to non-planets. A critical review of the literature from the 19th Century to the present shows this is factually incorrect. The literature shows the term asteroid was broadly recognized as a subset of planet for 150 years. On-going discovery of asteroids resulted in a de facto stretching of the… ▽ More It is often claimed that asteroids' sharing of orbits is the reason they were re-classified from planets to non-planets. A critical review of the literature from the 19th Century to the present shows this is factually incorrect. The literature shows the term asteroid was broadly recognized as a subset of planet for 150 years. On-going discovery of asteroids resulted in a de facto stretching of the concept of planet to include the ever-smaller bodies. Scientists found utility in this taxonomic identification as it provided categories needed to argue for the leading hypothesis of planet formation, Laplace's nebular hypothesis. In the 1950s, developments in planet formation theory found it no longer useful to maintain taxonomic identification between asteroids and planets, Ceres being the primary exception. At approximately the same time, there was a flood of publications on the geophysical nature of asteroids showing them to be geophysically different than the large planets. This is when the terminology in asteroid publications calling them planets abruptly plunged from a high level of usage where it had hovered during the period 1801 - 1957 to a low level that held constant thereafter. This marks the point where the community effectively formed consensus that asteroids should be taxonomically distinct from planets. The evidence demonstrates this consensus formed on the basis of geophysical differences between asteroids and planets, not the sharing of orbits. We suggest attempts to build consensus around planetary taxonomy not rely on the non-scientific process of voting, but rather through precedent set in scientific literature and discourse, by which perspectives evolve with additional observations and information, just as they did in the case of asteroids. △ Less

Submitted 7 September, 2018; v1 submitted 10 May, 2018; originally announced May 2018.

Comments: 31 pages, 5 figures

Interstellar Pickup Ion Observations to 38 AU

Authors: D. J. McComas, E. J. Zirnstein, M. Bzowski, H. A. Elliott, B. Randol, N. A. Schwadron, J. M. Sokół, J. R. Szalay, C. Olkin, J. Spencer, A. Stern, H. Weaver

Abstract: We provide the first direct observations of interstellar H+ and He+ pickup ions in the solar wind from 22 AU to 38 AU. We use the Vasyliunas and Siscoe model functional form to quantify the pickup ion distributions, and while the fit parameters generally lie outside their physically expected ranges, this form allows fits that quantify variations in the pickup H+ properties with distance. By ~20 AU… ▽ More We provide the first direct observations of interstellar H+ and He+ pickup ions in the solar wind from 22 AU to 38 AU. We use the Vasyliunas and Siscoe model functional form to quantify the pickup ion distributions, and while the fit parameters generally lie outside their physically expected ranges, this form allows fits that quantify variations in the pickup H+ properties with distance. By ~20 AU, the pickup ions already provide the dominant internal pressure in the solar wind. We determine the radial trends and extrapolate them to the termination shock at ~90 AU, where the pickup H+ to core solar wind density reaches ~0.14. The pickup H+ temperature and thermal pressure increase from 22-38 AU, indicating additional heating of the pickup ions. This produces very large extrapolated ratios of pickup H+ to solar wind temperature and pressure and an extrapolated ratio of the pickup ion pressure to the solar wind dynamic pressure at the termination shock of ~0.16. Such a large ratio has profound implications for moderating the termination shock and the overall outer heliospheric interaction. We also identify suprathermal tails in the H+ spectra and complex features in the He+ spectra, likely indicating variations in the pickup ion history and processing. Finally, we discover enhancements in both H+ and He+ populations just below their cutoff energies, which may be associated with enhanced local pickup. This study serves to document the release and as the citable reference of these pickup ion data for broad community use and analysis. △ Less

Submitted 14 October, 2017; originally announced October 2017.

Comments: 31 pages, 16 figures, accepted for publication in The Astrophysical Journal Supplement Series

On the representation of capsizing in iceberg models

Authors: Till J. W. Wagner, Alon A. Stern, Rebecca W. Dell, Ian Eisenman

Abstract: Although iceberg models have been used for decades, they have received far more widespread attention in recent years, in part due to efforts to explicitly represent icebergs in climate models. This calls for increased scrutiny of all aspects of typical iceberg models. An important component of iceberg models is the representation of iceberg capsizing, or rolling. Rolling occurs spontaneously when… ▽ More Although iceberg models have been used for decades, they have received far more widespread attention in recent years, in part due to efforts to explicitly represent icebergs in climate models. This calls for increased scrutiny of all aspects of typical iceberg models. An important component of iceberg models is the representation of iceberg capsizing, or rolling. Rolling occurs spontaneously when the ratio of iceberg width to height falls below a critical threshold. Here we examine previously proposed representations of this threshold, and we find that there have been crucial errors in the representation of rolling in many modeling studies to date. We correct these errors and identify an accurate model representation of iceberg rolling. Next, we assess how iceberg rolling influences simulation results in a hierarchy of models. Rolling is found to substantially prolong the lifespan of individual icebergs and allow them to drift farther offshore, although it is found to have relatively small impacts on the large-scale freshwater distribution in comprehensive model simulations. The results suggest that accurate representations of iceberg rolling may be of particular importance for operational forecast models of iceberg drift, as well as for regional changes in high-resolution climate model simulations. △ Less

Submitted 22 February, 2017; originally announced February 2017.

Comments: 12 pages, 7 figures

Modeling glacial flow on and onto Pluto's Sputnik Planitia

Authors: O. M. Umurhan, A. D. Howard, J. M. Moore, A. M. Earle, R. P. Binzel, S. A. Stern, P. M. Schenk, R. A. Beyer, O. L. White, F. NImmo, W. B. McKinnon, K. Ennico, C. B. Olkin, H. A. Weaver, L. A. Young

Abstract: Observations of Pluto's surface made by the New Horizons spacecraft indicates present-day nitrogen ice glaciation in and around the basin known as Sputnik Planum. Motivated by these observations, we have developed an evolutionary glacial flow model of solid nitrogen ice taking into account its published thermophysical and rheologies properties. This model assumes that glacial ice layers flow lamin… ▽ More Observations of Pluto's surface made by the New Horizons spacecraft indicates present-day nitrogen ice glaciation in and around the basin known as Sputnik Planum. Motivated by these observations, we have developed an evolutionary glacial flow model of solid nitrogen ice taking into account its published thermophysical and rheologies properties. This model assumes that glacial ice layers flow laminarly and have low aspect ratios which permits a vertically integrated mathematical formulation. We assess the conditions for the validity of laminar nitrogen ice motion by revisiting the problem of the onset of solid-state buoyant convection of nitrogen ice for a variety of bottom thermal boundary conditions. Subject to uncertainties in nitrogen ice rheology, nitrogen ice layers are estimated to flow laminarly for thicknesses less than 400-1000 meters. The resulting mass-flux formulation for when the nitrogen ice flows as a laminar dry glacier is characterized by an Arrhenius-Glen functional form. The flow model developed is used here to qualitatively answer some questions motivated by observed glacial flow features found on Sputnik Planum. We find that the wavy transverse dark features found along the northern shoreline of Sputnik Planum may be a transitory imprint of shallow topography just beneath the ice surface suggesting the possibility that a major shoreward flow event happened relatively recently within the last few hundred years. Model results also support the interpretation that the prominent darkened features resembling flow lobes observed along the eastern shoreline of the Sputnik Planum basin may be a result of wet nitrogen glacial ice flowing into the basin from the pitted highlands of eastern Tombaugh Regio. △ Less

Submitted 26 July, 2018; v1 submitted 18 June, 2016; originally announced June 2016.

Comments: This definitive version has several typos corrected including equation expressions in Appendix C.2 and C.3. Updated version with associated errata in process at Icarus (July 26, 2018). All previous results appearing in journal version --especially those pertaining to glacial flow and their related timescales (Sections 4 & 5) -- are unchanged

Dynamics of beneficial epidemics

Authors: Andrew Berdahl, Christa Brelsford, Caterina De Bacco, Marion Dumas, Vanessa Ferdinand, Joshua A. Grochow, Laurent Hébert-Dufresne, Yoav Kallus, Christopher P. Kempes, Artemy Kolchinsky, Daniel B. Larremore, Eric Libby, Eleanor A. Power, Caitlin A. Stern, Brendan Tracey

Abstract: Pathogens can spread epidemically through populations. Beneficial contagions, such as viruses that enhance host survival or technological innovations that improve quality of life, also have the potential to spread epidemically. How do the dynamics of beneficial biological and social epidemics differ from those of detrimental epidemics? We investigate this question using three theoretical approache… ▽ More Pathogens can spread epidemically through populations. Beneficial contagions, such as viruses that enhance host survival or technological innovations that improve quality of life, also have the potential to spread epidemically. How do the dynamics of beneficial biological and social epidemics differ from those of detrimental epidemics? We investigate this question using three theoretical approaches. First, in the context of population genetics, we show that a horizontally-transmissible element that increases fitness, such as viral DNA, spreads superexponentially through a population, more quickly than a beneficial mutation. Second, in the context of behavioral epidemiology, we show that infections that cause increased connectivity lead to superexponential fixation in the population. Third, in the context of dynamic social networks, we find that preferences for increased global infection accelerate spread and produce superexponential fixation, but preferences for local assortativity halt epidemics by disconnecting the infected from the susceptible. We conclude that the dynamics of beneficial biological and social epidemics are characterized by the rapid spread of beneficial elements, which is facilitated in biological systems by horizontal transmission and in social systems by active spreading behavior of infected individuals. △ Less

Submitted 17 February, 2017; v1 submitted 7 April, 2016; originally announced April 2016.

Comments: The original version of this paper [v1] was produced, from conception of idea, to execution, to writing, by a team in just 72 hours (see Appendix of [v1]). This is a revised version

A four-pixel single-photon pulse-position camera fabricated from WSi superconducting nanowire single-photon detectors

Authors: V. B. Verma, R. Horansky, F. Marsili, J. A. Stern, M. D. Shaw, A. E. Lita, R. P. Mirin, S. W. Nam

Abstract: We demonstrate a scalable readout scheme for an infrared single-photon pulse-position camera consisting of WSi superconducting nanowire single-photon detectors (SNSPDs). For an N x N array, only 2 x N wires are required to obtain the position of a detection event. As a proof-of-principle, we show results from a 2 x 2 array. We demonstrate a scalable readout scheme for an infrared single-photon pulse-position camera consisting of WSi superconducting nanowire single-photon detectors (SNSPDs). For an N x N array, only 2 x N wires are required to obtain the position of a detection event. As a proof-of-principle, we show results from a 2 x 2 array. △ Less

Submitted 14 November, 2013; v1 submitted 6 November, 2013; originally announced November 2013.

MeV electrons detected by the Alice UV spectrograph during the New Horizons flyby of Jupiter

Authors: A. J. Steffl, A. B. Shinn, G. R. Gladstone, J. Wm. Parker, K. D. Retherford, D. C. Slater, M. H. Versteeg, S. A. Stern

Abstract: In early 2007, the New Horizons spacecraft flew through the Jovian magnetosphere on the dusk side. Here, we present results from a novel means of detecting energetic electrons along New Horizons' trajectory: the background count rate of the Alice ultraviolet spectrograph. Electrons with energies >1 MeV can penetrate the thin aluminum housing of Alice, interact with the microchannel plate detector,… ▽ More In early 2007, the New Horizons spacecraft flew through the Jovian magnetosphere on the dusk side. Here, we present results from a novel means of detecting energetic electrons along New Horizons' trajectory: the background count rate of the Alice ultraviolet spectrograph. Electrons with energies >1 MeV can penetrate the thin aluminum housing of Alice, interact with the microchannel plate detector, and produce a count that is indistinguishable from an FUV photon. We present Alice data, proportional to the MeV electron flux, from an 11-day period centered on the spacecraft's closest approach to Jupiter, and compare it to electron data from the PEPSSI instrument. We find that a solar wind compression event passed over the spacecraft just prior to it entering the Jovian magnetosphere. Subsequently, the magnetopause boundary was detected at a distance of 67 R_J suggesting a compressed magnetospheric configuration. Three days later, when the spacecraft was 35-90 R_J downstream of Jupiter, New Horizons observed a series of 15 current sheet crossings, all of which occurred significantly northward of model predictions implying solar wind influence over the middle and outer Jovian magnetosphere, even to radial distances as small as ~35 R_J. In addition, we find the Jovian current sheet, which had a half-thickness of at least 7.4 R_J between 1930 and 2100 LT abruptly thinned to a thickness of ~3.4 R_J around 2200 LT. △ Less

Submitted 16 January, 2013; originally announced January 2013.

Comments: 39 pages, 8 figures

Journal ref: Journal of Geophysical Research (Space Physics), 2012, vol 117, pp. A10222

Detecting Single Infrared Photons with 93% System Efficiency

Authors: F. Marsili, V. B. Verma, J. A. Stern, S. Harrington, A. E. Lita, T. Gerrits, I. Vayshenker, B. Baek, M. D. Shaw, R. P. Mirin, S. W. Nam

Abstract: Single-photon detectors (SPDs) at near infrared wavelengths with high system detection efficiency (> 90%), low dark count rate (< 1 counts per second, cps), low timing jitter (< 100 ps), and short reset time (< 100 ns) would enable landmark experiments in a variety of fields. Although some of the existing approaches to single-photon detection fulfill one or two of the above specifications, to date… ▽ More Single-photon detectors (SPDs) at near infrared wavelengths with high system detection efficiency (> 90%), low dark count rate (< 1 counts per second, cps), low timing jitter (< 100 ps), and short reset time (< 100 ns) would enable landmark experiments in a variety of fields. Although some of the existing approaches to single-photon detection fulfill one or two of the above specifications, to date no detector has met all of the specifications simultaneously. Here we report on a fiber-coupled single-photon-detection system employing superconducting nanowire single photon detectors (SNSPDs) that closely approaches the ideal performance of SPDs. Our detector system has a system detection efficiency (SDE), including optical coupling losses, greater than 90% in the wavelength range λ= 1520-1610 nm; device dark count rate (measured with the device shielded from room-temperature blackbody radiation) of ~ 0.01 cps; timing jitter of ~ 150 ps FWHM; and reset time of 40 ns. △ Less

Submitted 25 September, 2012; originally announced September 2012.

Infrastructure for Detector Research and Development towards the International Linear Collider

Authors: J. Aguilar, P. Ambalathankandy, T. Fiutowski, M. Idzik, Sz. Kulis, D. Przyborowski, K. Swientek, A. Bamberger, M. Köhli, M. Lupberger, U. Renz, M. Schumacher, Andreas Zwerger, A. Calderone, D. G. Cussans, H. F. Heath, S. Mandry, R. F. Page, J. J. Velthuis, D. Attié, D. Calvet, P. Colas, X. Coppolani, Y. Degerli, E. Delagnes , et al. (252 additional authors not shown)

Abstract: The EUDET-project was launched to create an infrastructure for develo** and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infras… ▽ More The EUDET-project was launched to create an infrastructure for develo** and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infrastructures for tracking detectors as well as for calorimetry. △ Less

Submitted 23 January, 2012; originally announced January 2012.

Comments: 54 pages, 48 pictures

Variational Integrators for Maxwell's Equations with Sources

Authors: Ari Stern, Yiying Tong, Mathieu Desbrun, Jerrold E. Marsden

Abstract: In recent years, two important techniques for geometric numerical discretization have been developed. In computational electromagnetics, spatial discretization has been improved by the use of mixed finite elements and discrete differential forms. Simultaneously, the dynamical systems and mechanics communities have developed structure-preserving time integrators, notably variational integrators t… ▽ More In recent years, two important techniques for geometric numerical discretization have been developed. In computational electromagnetics, spatial discretization has been improved by the use of mixed finite elements and discrete differential forms. Simultaneously, the dynamical systems and mechanics communities have developed structure-preserving time integrators, notably variational integrators that are constructed from a Lagrangian action principle. Here, we discuss how to combine these two frameworks to develop variational spacetime integrators for Maxwell's equations. Extending our previous work, which first introduced this variational perspective for Maxwell's equations without sources, we also show here how to incorporate free sources of charge and current. △ Less

Submitted 13 March, 2008; originally announced March 2008.

Comments: 5 pages, 3 figures, submitted to Progress in Electromagnetics Research Symposium (PIERS) 2008 proceedings

MSC Class: 78M30 (Primary); 65P10; 37K05 (Secondary)

Journal ref: PIERS Online, Vol. 4, No. 7, 711-715, 2008

Geometric Computational Electrodynamics with Variational Integrators and Discrete Differential Forms

Authors: Ari Stern, Yiying Tong, Mathieu Desbrun, Jerrold E. Marsden

Abstract: In this paper, we develop a structure-preserving discretization of the Lagrangian framework for electromagnetism, combining techniques from variational integrators and discrete differential forms. This leads to a general family of variational, multisymplectic numerical methods for solving Maxwell's equations that automatically preserve key symmetries and invariants. In doing so, we demonstrate… ▽ More In this paper, we develop a structure-preserving discretization of the Lagrangian framework for electromagnetism, combining techniques from variational integrators and discrete differential forms. This leads to a general family of variational, multisymplectic numerical methods for solving Maxwell's equations that automatically preserve key symmetries and invariants. In doing so, we demonstrate several new results, which apply both to some well-established numerical methods and to new methods introduced here. First, we show that Yee's finite-difference time-domain (FDTD) scheme, along with a number of related methods, are multisymplectic and derive from a discrete Lagrangian variational principle. Second, we generalize the Yee scheme to unstructured meshes, not just in space but in 4-dimensional spacetime. This relaxes the need to take uniform time steps, or even to have a preferred time coordinate at all. Finally, as an example of the type of methods that can be developed within this general framework, we introduce a new asynchronous variational integrator (AVI) for solving Maxwell's equations. These results are illustrated with some prototype simulations that show excellent energy and conservation behavior and lack of spurious modes, even for an irregular mesh with asynchronous time step**. △ Less

Submitted 27 May, 2009; v1 submitted 30 July, 2007; originally announced July 2007.

Comments: 37 pages, 12 figures. v3: broadly revised, including incorporation of free source terms, new numerical experiments and figures

MSC Class: 78M30 (Primary); 37K05; 37M15 (Secondary)

Journal ref: Geometry, mechanics, and dynamics, vol. 73 of Fields Institute Communications, 437-475, 2015