-
High detectivity terahertz radiation sensing using frequency-noise-optimized nanomechanical resonators
Authors:
Chang Zhang,
Eeswar K. Yalavarthi,
Mathieu Giroux,
Wei Cui,
Michel Stephan,
Ali Maleki,
Arnaud Weck,
Jean-Michel Ménard,
Raphael St-Gelais
Abstract:
We achieve high detectivity terahertz sensing using a silicon nitride nanomechanical resonator functionalized with a metasurface absorber. High performances are achieved by striking a fine balance between the frequency stability of the resonator, and its responsivity to absorbed radiation. Using this approach, we demonstrate a detectivity $D^*=3.4\times10^9~\mathrm{cm\cdot\sqrt{Hz}/W}$ and a noise…
▽ More
We achieve high detectivity terahertz sensing using a silicon nitride nanomechanical resonator functionalized with a metasurface absorber. High performances are achieved by striking a fine balance between the frequency stability of the resonator, and its responsivity to absorbed radiation. Using this approach, we demonstrate a detectivity $D^*=3.4\times10^9~\mathrm{cm\cdot\sqrt{Hz}/W}$ and a noise equivalent power $\mathrm{NEP}=36~\mathrm{pW/\sqrt{Hz}}$ that outperform the best room-temperature on-chip THz detectors (i.e., pyroelectrics). Our optical absorber consists of a 1-mm diameter metasurface, which currently enables a 0.5-3 THz detection range but can easily be scaled to other frequencies in the THz and infrared ranges. In addition to demonstrating high-performance terahertz sensing, our work unveils an important fundamental trade-off between high frequency stability and high responsivity in thermal-based nanomechanical radiation sensors.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
B2G4: A synthetic data pipeline for the integration of Blender models in Geant4 simulation toolkit
Authors:
Angel Bueno Rodriguez,
Felix Sattler,
Maximilian Perez Prada,
Maurice Stephan,
Sarah Barnes
Abstract:
The correctness and precision of particle physics simulation software, such as Geant4, is expected to yield results that closely align with real-world observations or well-established theoretical predictions. Notably, the accuracy of these simulated outcomes is contingent upon the software's capacity to encapsulate detailed attributes, including its prowess in generating or incorporating complex g…
▽ More
The correctness and precision of particle physics simulation software, such as Geant4, is expected to yield results that closely align with real-world observations or well-established theoretical predictions. Notably, the accuracy of these simulated outcomes is contingent upon the software's capacity to encapsulate detailed attributes, including its prowess in generating or incorporating complex geometrical constructs. While the imperatives of precision and accuracy are essential in these simulations, the need to manually code highly detailed geometries emerges as a salient bottleneck in develo** software-driven physics simulations. This research proposes Blender-to-Geant4 (B2G4), a modular data workflow that utilizes Blender to create 3D scenes, which can be exported as geometry input for Geant4. B2G4 offers a range of tools to streamline the creation of simulation scenes with multiple complex geometries and realistic material properties. Here, we demonstrate the use of B2G4 in a muon scattering tomography application to image the interior of a sealed steel structure. The modularity of B2G4 paves the way for the designed scenes and tools to be embedded not only in Geant4, but in other scientific applications or simulation software.
△ Less
Submitted 10 November, 2023;
originally announced November 2023.
-
Localized Thermal Gradients On-Chip by Radiative Cooling of Silicon Nitride Nanomechanical Resonators
Authors:
Alexandre Bouchard,
Timothy Hodges,
Michel Stephan,
Lixue Wu,
Triantafillos Koukoulas,
Richard Green,
Raphael St-Gelais
Abstract:
Small scale renewable energy harvesting is an attractive solution to the growing need for power in remote technological applications. For this purpose, localized thermal gradients on-chip--created via radiative cooling--could be exploited to create microscale renewable heat engines running on environmental heat. This could allow self-powering in small scale portable applications, thus reducing the…
▽ More
Small scale renewable energy harvesting is an attractive solution to the growing need for power in remote technological applications. For this purpose, localized thermal gradients on-chip--created via radiative cooling--could be exploited to create microscale renewable heat engines running on environmental heat. This could allow self-powering in small scale portable applications, thus reducing the need for non-renewable sources of electricity and hazardous batteries. In this work, we demonstrate the creation of a local thermal gradient on-chip by radiative cooling of a 90 nm thick freestanding silicon nitride nanomechanical resonator integrated on a silicon substrate that remains at ambient temperature. The reduction in temperature of the thin film is inferred by tracking its mechanical resonance frequency, under high vacuum, using an optical fiber interferometer. Experiments were conducted on 15 different days during fall and summer months, resulting in successful radiative cooling of the membrane in each case. Maximum temperature drops of 9.3 K and 7.1 K are demonstrated during the day and night, respectively, in close correspondence with our heat transfer model. Future improvements to the experimental setup could improve the temperature reduction to 48 K for the same membrane, while emissivity engineering potentially yields a maximum theoretical cooling of 67 K with an ideal emitter.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
High Resolution Measurement of Near-Field Radiative Heat Transfer enabled by Nanomechanical Resonators
Authors:
Mathieu Giroux,
Chang Zhang,
Nikaya Snell,
Gengyang Mu,
Michel Stephan,
Raphael St-Gelais
Abstract:
Near-field radiative heat transfer (NFHT) research currently suffers from an imbalance between numerous theoretical studies, as opposed to experimental reports that remain, in proportion, relatively scarce. Existing experimental platforms all rely on unique custom-built devices on which it is difficult to integrate new materials and structures for studying the breadth of theoretically proposed phe…
▽ More
Near-field radiative heat transfer (NFHT) research currently suffers from an imbalance between numerous theoretical studies, as opposed to experimental reports that remain, in proportion, relatively scarce. Existing experimental platforms all rely on unique custom-built devices on which it is difficult to integrate new materials and structures for studying the breadth of theoretically proposed phenomena. Here we show high-resolution NFHT measurements using, as our sensing element, silicon nitride (SiN) freestanding nanomembranes$-$a widely available platform routinely used in materials and cavity optomechanics research. We measure NFHT by tracking the high mechanical quality (Q) factor ($>2\times10^6$) resonance of a membrane placed in the near-field of a hemispherical hot object. We find that high Q-factor enables a temperature resolution ($1.2\times10^{-6} \ \mathrm{K}$) that is unparalleled in previous NFHT experiments. Results are in good agreement with a custom-built model combining heat transport in nanomembranes and the effect of non-uniform stress/temperature on the resonator eigenmodes.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
The Pierre Auger Observatory V: Enhancements
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Ongoing and planned enhancements of the Pierre Auger Observatory
Ongoing and planned enhancements of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
The Pierre Auger Observatory IV: Operation and Monitoring
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Technical reports on operations and monitoring of the Pierre Auger Observatory
Technical reports on operations and monitoring of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
