Showing 1–9 of 9 results for author: Stephan, F

First high peak and average power single-pass THz FEL based on high brightness photoinjector

Authors: M. Krasilnikov, Z. Aboulbanine, G. Adhikari, N. Aftab, A. Asoyan, P. Boonpornprasert, H. Davtyan, G. Georgiev, J. Good, A. Grebinyk, M. Gross, A. Hoffmann, E. Kongmon, X. -K. Li, A. Lueangaramwong, D. Melkumyan, S. Mohanty, R. Niemczyk, A. Oppelt, H. Qian, C. Richard, F. Stephan, G. Vashchenko, T. Weilbach, X. Zhang , et al. (9 additional authors not shown)

Abstract: Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central waveleng… ▽ More Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central wavelength of 100 micrometers. The THz FEL prototype is currently in operation at the Photo Injector Test facility at DESY in Zeuthen (PITZ) and uses the same type of electron source as the European XFEL photo injector. A self-amplified spontaneous emission (SASE) FEL was envisioned as the main mechanism for generating the THz pulses. Although the THz FEL at PITZ is supposed to use the same mechanism as at X-ray facilities, it cannot be considered as a simple scaling of the radiation wavelength because there is a large difference in the number of electrons per radiation wavelength, which is five orders of magnitude higher for the THz case. The bunching factor arising from the electron beam current profile contributes strongly to the initial spontaneous emission starting the FEL process. Proof-of-principle experiments were done at PITZ using an LCLS-I undulator to generate the first high-power, high-repetition-rate single-pass THz FEL radiation. Electron bunches with a beam energy of ~17 MeV and a bunch charge of up to several nC are used to generate THz pulses with a pulse energy of several tens of microjoules. For example, for an electron beam with a charge of ~2.4 nC, more than 100 microjoules were generated at a central wavelength of 100 micrometers. The narrowband spectrum was also demonstrated by spectral measurements. These proof-of-principle experiments pave the way for a tunable, high-repetition-rate THz source providing pulses with energies in the millijoule range. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Comments: (unpublished) for submission to PRAB

Analysis of photoinjector transverse phase space in action and phase coordinates

Authors: Houjun Qian, Mikhail Krasilnikov, Zakaria Aboulbanine, Gowri Adhikari, Namra Aftab, Prach Boonpornpras, Georgi Georgiev, James Good, Matthias Gross, Christian Koschitzki, Xiangkun Li, Osip Lishilin, Anusorn Lueangaramwong, Raffael Niemczyk, Anne Oppelt, Guan Shu, Frank Stephan, Grygorii Vashchenko, Tobias Weilbach

Abstract: Photoinjectors are the main high brightness electron sources for X-ray free electron lasers (XFEL). Photoinjector emittance reduction is one of the key knobs for improving XFEL lasing, so precise emittance measurement is critical. It's well known that rms emittance is very sensitive to low intensity tails of particle distributions in the phase space, whose measurement depend on the signal to noise… ▽ More Photoinjectors are the main high brightness electron sources for X-ray free electron lasers (XFEL). Photoinjector emittance reduction is one of the key knobs for improving XFEL lasing, so precise emittance measurement is critical. It's well known that rms emittance is very sensitive to low intensity tails of particle distributions in the phase space, whose measurement depend on the signal to noise ratio (SNR) and image processing procedures. Such sensitivities make the interpretations of beam transverse brightness challenging, leading to different emittance definitions to reduce the impact of tail particles. In this paper, transverse phase space is analyzed in action and phase coordinates for both analytical models and experiments, which give a more intuitive way to calculate the beam core brightness. △ Less

Submitted 18 February, 2022; originally announced February 2022.

Slice energy spread measurement in the low energy photoinjector

Authors: Houjun Qian, Mikhail Krasilnikov, Anusorn Lueangaramwong, Xiangkun Li, Osip Lishilin, Zakaria Aboulbanine, Gowri Adhikari, Namra Aftab, Prach Boonpornprasert, Georgi Georgiev, James Good, Matthias Gross, Christian Koschitzki, Raffael Niemczyk, Anne Oppelt, Guan Shu, Frank Stephan, Grygorii Vashchenko, Tobias Weilbach

Abstract: Slice energy spread is one of the key parameters in free electron laser optimizations, but its accurate measurement is not straightforward. Two recent studies from high energy ($>$100 MeV) photoinjectors at SwissFEL and European XFEL have reported much higher slice energy spread than expected at their XFEL working points (200 - 250 pC). In this paper, a new method for measuring slice energy spread… ▽ More Slice energy spread is one of the key parameters in free electron laser optimizations, but its accurate measurement is not straightforward. Two recent studies from high energy ($>$100 MeV) photoinjectors at SwissFEL and European XFEL have reported much higher slice energy spread than expected at their XFEL working points (200 - 250 pC). In this paper, a new method for measuring slice energy spread at a lower beam energy ($\sim$20 MeV) is proposed and demonstrated at the PhotoInjector Test facility at DESY Zeuthen (PITZ), and the results for 250 pC and 500 pC are much lower than those measured at high energy injectors. △ Less

Submitted 31 January, 2022; originally announced January 2022.

Design studies of a continuous-wave normal conducting buncher for European X-FEL

Authors: Shankar Lal, V. Paramonov, H. Qian1, H. Shaker, G. Shu, Ye Chen, F. Stephan

Abstract: A three-cell 1.3 GHz, Normal Conducting (NC) buncher is designed for a possible future upgrade of the European XFEL to operate in a continuous-wave (CW) / long pulse (LP) mode. The RF geometry of the buncher is optimized for high shunt impedance, large mode separation as well as multipacting free in the operation range. The bunchersupport cavity voltage of 400 kV with an RF power dissipation of 14… ▽ More A three-cell 1.3 GHz, Normal Conducting (NC) buncher is designed for a possible future upgrade of the European XFEL to operate in a continuous-wave (CW) / long pulse (LP) mode. The RF geometry of the buncher is optimized for high shunt impedance, large mode separation as well as multipacting free in the operation range. The bunchersupport cavity voltage of 400 kV with an RF power dissipation of 14 kW. A tapered waveguide-based RF power coupler is designed to feed the RF power to the buncher. The RF power coupler port is optimized for field asymmetry compensation. The thermal load due to RF power dissipation is analyzed using Multiphysics simulations in CST and a simplified cooling scheme is designed. △ Less

Submitted 24 December, 2021; originally announced December 2021.

Single shot cathode transverse momentum imaging in high brightness photoinjectors

Authors: Peng-Wei Huang, Houjun Qian, Ye Chen, Daniele Filippetto, Matthias Gross, Igor Isaev, Christian Koschitzki, Mikhail Krasilnikov, Shankar Lal, Xiangkun Li, Osip Lishilin, David Melkumyan, Raffael Niemczyk, Anne Oppelt, Fernando Sannibale, Hamed Shaker, Guan Shu, Frank Stephan, Chuanxiang Tang, Grygorii Vashchenko, Weishi Wan

Abstract: In state of the art photoinjector electron sources, thermal emittance from photoemission dominates the final injector emittance. Therefore, low thermal emittance cathode developments and diagnostics are very important. Conventional thermal emittance measurements for the high gradient gun are time-consuming and thus thermal emittance is not measured as frequently as quantum efficiency during the li… ▽ More In state of the art photoinjector electron sources, thermal emittance from photoemission dominates the final injector emittance. Therefore, low thermal emittance cathode developments and diagnostics are very important. Conventional thermal emittance measurements for the high gradient gun are time-consuming and thus thermal emittance is not measured as frequently as quantum efficiency during the lifetime of photocathodes, although both are important properties for the photoinjector optimizations. In this paper, a single shot measurement of photoemission transverse momentum, i.e., thermal emittance per rms laser spot size, is proposed for photocathode RF guns. By tuning the gun solenoid focusing, the electrons transverse momenta at the cathode are imaged to a downstream screen, which enables a single shot measurement of both the rms value and the detailed spectra of the photoelectrons transverse momenta. Both simulations and proof of principle experiments are reported. △ Less

Submitted 17 February, 2020; originally announced February 2020.

Comments: 9 pages, 15 figures

Journal ref: Phys. Rev. Accel. Beams 23, 043401 (2020)

A note on the experiment parameters for the non-resonant streaming instability: competition between left and right circularly polarized modes

Authors: Chun-Sung Jao, Sergei Vafin, Ye Chen, Matthias Gross, Mikhail Krasilnikov, Gregor Loisch, Timon Mehrling, Jacek Niemiec, Anne Oppelt, Alberto Martinez de la Ossa, Jens Osterhoff, Martin Pohl, Frank Stephan

Abstract: A non-resonant streaming instability driven by cosmic-ray currents, also called Bell's instability, is proposed as a candidate for providing the required magnetic turbulence of efficient diffusive shock accelerations. To demonstrate the saturation level and mechanism of the non-resonant streaming instability in a laboratory environment, we attempt to develop an experiment at the Photo Injector Tes… ▽ More A non-resonant streaming instability driven by cosmic-ray currents, also called Bell's instability, is proposed as a candidate for providing the required magnetic turbulence of efficient diffusive shock accelerations. To demonstrate the saturation level and mechanism of the non-resonant streaming instability in a laboratory environment, we attempt to develop an experiment at the Photo Injector Test Facility at DESY, Zeuthen site (PITZ). As an electron beam is used to replace the proton beam to carry the cosmic-ray current in our experiment, the polarization of the non-resonant streaming instability will be modified from the left-handed (LH) mode to the right-handed (RH) mode. The theoretical instability analysis shows that the growth rate of this RH non-resonant mode may be smaller than it of the LH resonant mode. However the LH resonant mode can be ignored in our experiment while the expected wavelength is longer than the used plasma cell. The results of PIC simulations will also support this contention and the occurrence of non-resonant streaming instability in our experiment. △ Less

Submitted 30 October, 2019; originally announced October 2019.

Passive Ballistic Microbunching of Non-Ultrarelativistic Electron Bunches using Electromagnetic Wakefields in Dielectric-Lined Waveguides

Authors: Francois Lemery, Philippe Piot, Gayane Amatuni, Prach Boonpornprasert, Ye Lining Chen, James David Good, Bagrat Grigoryan, Matthias Gross, Mikhail Krasilnikov, Osip Lishilin, Gregor Loisch, Anne Oppelt, Sebastian Philipp, Houjun Qian, Yves Renier, Frank Stephan, Igor Zagorodnov

Abstract: Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this… ▽ More Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this Letter we propose and experimentally demonstrate a passive microbunching technique capable of forming a picosecond bunch train at $\sim 6$~MeV. The method relies on the excitation of electromagnetic wakefields as the beam propagates through a dielectric-lined waveguide. Owing to the non-ultrarelativistic nature of the beam, the induced energy modulation eventually converts into a density modulation as the beam travels in a following free-space drift. The modulated beam is further accelerated to $\sim20$~MeV while preserving the imparted density modulation. △ Less

Submitted 25 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Lett. 122, 044801 (2019)

Generation of quasi continuous-wave electron beams in an L-band normal conducting pulsed RF injector for laboratory astrophysics experiments

Authors: Ye Chen, Gregor Loisch, Matthias Gross, Chun-Sung Jao, Mikhail Krasilnikov, Anne Oppelt, Jens Osterhoff, Martin Pohl, Houjun Qian, Frank Stephan, Sergei Vafin

Abstract: We report on an approach to produce quasi continuous-wave (cw) electron beams with an average beam current of milliamperes and a mean beam energy of a few MeV in a pulsed RF injector. Potential applications are in the planned laboratory astrophysics programs at DESY. The beam generation is based on field emission from a specially designed metallic field emitter. A quasi cw beam profile is formed o… ▽ More We report on an approach to produce quasi continuous-wave (cw) electron beams with an average beam current of milliamperes and a mean beam energy of a few MeV in a pulsed RF injector. Potential applications are in the planned laboratory astrophysics programs at DESY. The beam generation is based on field emission from a specially designed metallic field emitter. A quasi cw beam profile is formed over subsequent RF cycles at the resonance frequency of the gun cavity. This is realized by debunching in a cut disk structure accelerating cavity (booster) downstream of the gun. The peak and average beam currents can be tuned in beam dynamics simulations by adjusting operation conditions of the booster cavity. Optimization of the transverse beam size at specific positions (e.g., entrance of the plasma experiment) is performed by applying magnetic focusing fields provided by solenoids along the beam line. In this paper, the design of a microtip field emitter is introduced and characterized in electromagnetic field simulations in the gun cavity. A series of particle tracking simulations are conducted for multi-parametric optimization of the parameters of the produced quasi cw electron beams. The obtained results will be presented and discussed. In addition, measurements of the parasitic field emission (PFE) current (dark current) in the PITZ gun will be exemplarily shown to distinguish its order of magnitude from the produced beam current by the designed field emitter. △ Less

Submitted 21 March, 2018; v1 submitted 14 March, 2018; originally announced March 2018.

Comments: 23 pages, 17 figures

Studies on charge production from Cs2Te photocathodes in the PITZ L-band normal conducting radio frequency photo injector

Authors: C. Hernandez-Garcia, M. Kraslinikov, G. Asova, M. Bakr, P. Boonpornprasert, J. Good, M. Gross, H. Huck, I. Isaev, D. Kalantaryan, M. Khojoyan, G. Kourkafas, O. Lishilin, D. Malyutin, D. Melkumyan, A. Oppelt, M. Otevrel, G. Pathak, Y. Renier, T. Rublack, F. Stephan, G. Vashchenko, Q. Zhao

Abstract: This paper discusses the behavior of electron bunch charge produced in an L-band normal conducting radio frequency cavity (RF gun) from Cs2Te photocathodes illuminated with ps-long UV laser pulses when the laser transverse distribution consists of a flat-top core with Gaussian-like decaying halo. The produced charge shows a linear dependence at low laser pulse energies as expected in the quantum e… ▽ More This paper discusses the behavior of electron bunch charge produced in an L-band normal conducting radio frequency cavity (RF gun) from Cs2Te photocathodes illuminated with ps-long UV laser pulses when the laser transverse distribution consists of a flat-top core with Gaussian-like decaying halo. The produced charge shows a linear dependence at low laser pulse energies as expected in the quantum efficiency limited emission regime, while its dependence on laser pulse energy is observed to be much weaker for higher values, due to space charge limited emission. However, direct plug-in of experimental parameters into the space charge tracking code ASTRA yields lower output charge in the space charge limited regime compared to measured values. The rate of increase of the produced charge at high laser pulse energies close to the space charge limited emission regime seems to be proportional to the amount of halo present in the radial laser profile since the charge from the core has saturated already. By utilizing core + halo particle distributions based on measured radial laser profiles, ASTRA simulations and semi-analytical emission models reproduce the behavior of the measured charge for a wide range of RF gun and laser operational parameters within the measurement uncertainties. △ Less

Submitted 1 July, 2016; originally announced July 2016.

Comments: 15 pages, 16 figures, 2 tables