-
An embedding-aware continuum thin shell formulation
Authors:
Abhishek Ghosh,
Andrew McBride,
Zhaowei Liu,
Luca Heltai,
Paul Steinmann,
Prashant Saxena
Abstract:
Cutting-edge smart materials are transforming the domains of soft robotics, actuators, and sensors by harnessing diverse non-mechanical stimuli, such as electric and magnetic fields. Accurately modelling their physical behaviour necessitates an understanding of the complex interactions between the structural deformation and the fields in the surrounding medium. For thin shell structures, this chal…
▽ More
Cutting-edge smart materials are transforming the domains of soft robotics, actuators, and sensors by harnessing diverse non-mechanical stimuli, such as electric and magnetic fields. Accurately modelling their physical behaviour necessitates an understanding of the complex interactions between the structural deformation and the fields in the surrounding medium. For thin shell structures, this challenge is addressed by develo** a shell model that effectively incorporates the three-dimensional field it is embedded in by appropriately accounting for the relevant boundary conditions. This study presents a model for the nonlinear deformation of thin hyperelastic shells, incorporating Kirchhoff-Love assumptions and a rigorous variational approach. The shell theory is derived from 3D nonlinear elasticity by dimension reduction while preserving the boundary conditions at the top and bottom surfaces of the shell. Consequently, unlike classical shell theories, this approach can distinguish between pressure loads applied at the top and bottom surfaces, and delivers a platform to include multi-physics coupling. Numerical examples are presented to illustrate the theory and provide a physical interpretation of the novel mechanical variables of the model.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
A fully-coupled nonlinear magnetoelastic thin shell formulation
Authors:
Abhishek Ghosh,
Andrew McBride,
Zhaowei Liu,
Luca Heltai,
Paul Steinmann,
Prashant Saxena
Abstract:
A geometrically exact dimensionally reduced order model for the nonlinear deformation of thin magnetoelastic shells is presented. The Kirchhoff-Love assumptions for the mechanical fields are generalised to the magnetic variables to derive a consistent two-dimensional theory based on a rigorous variational approach. The general deformation map, as opposed to the mid-surface deformation, is consider…
▽ More
A geometrically exact dimensionally reduced order model for the nonlinear deformation of thin magnetoelastic shells is presented. The Kirchhoff-Love assumptions for the mechanical fields are generalised to the magnetic variables to derive a consistent two-dimensional theory based on a rigorous variational approach. The general deformation map, as opposed to the mid-surface deformation, is considered as the primary variable resulting in a more accurate description of the nonlinear deformation. The commonly used plane stress assumption is discarded due to the Maxwell stress in the surrounding free-space requiring careful treatment on the upper and lower shell surfaces. The complexity arising from the boundary terms when deriving the Euler-Lagrange governing equations is addressed via a unique application of Green's theorem.The governing equations are solved analytically for the problem of an infinite cylindrical magnetoelastic shell. This clearly demonstrates the model's capabilities and provides a physical interpretation of the new variables in the modified variational approach. This novel formulation for magnetoelastic shells serves as a valuable tool for the accurate design of thin magneto-mechanically coupled devices.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
Modelling the flexoelectric effect in solids: a micromorphic approach
Authors:
Andrew McBride,
Denis Davydov,
Paul Steinmann
Abstract:
Flexoelectricity is characterised by the coupling of the gradient of the deformation and the electrical polarization in a dielectric material. A novel micromorphic approach is presented to accommodate the resulting higher-order gradient contributions arising in this highly-nonlinear and coupled problem within a classical finite element setting. The formulation accounts for all material and geometr…
▽ More
Flexoelectricity is characterised by the coupling of the gradient of the deformation and the electrical polarization in a dielectric material. A novel micromorphic approach is presented to accommodate the resulting higher-order gradient contributions arising in this highly-nonlinear and coupled problem within a classical finite element setting. The formulation accounts for all material and geometric nonlinearities, as well as the coupling between the mechanical, electrical and micromorphic fields. The highly-nonlinear system of governing equations are derived using the Dirichlet principle and solved using the finite element method. A series of numerical examples serve to elucidate the theory and to provide insight into this fascinating effect.
△ Less
Submitted 25 July, 2020; v1 submitted 20 August, 2019;
originally announced September 2019.
-
A matrix-free approach for finite-strain hyperelastic problems using geometric multigrid
Authors:
Denis Davydov,
Jean-Paul Pelteret,
Daniel Arndt,
Paul Steinmann
Abstract:
The performance of finite element solvers on modern computer architectures is typically memory bound for sufficiently large problems. The main cause for this is that loading matrix elements from RAM into CPU cache is significantly slower than performing the arithmetic operations when solving the problem. In order to improve the performance of iterative solvers within the high-performance computing…
▽ More
The performance of finite element solvers on modern computer architectures is typically memory bound for sufficiently large problems. The main cause for this is that loading matrix elements from RAM into CPU cache is significantly slower than performing the arithmetic operations when solving the problem. In order to improve the performance of iterative solvers within the high-performance computing context, so-called matrix-free methods are widely adopted in the fluid mechanics community, where matrix-vector products are computed on-the-fly.
To date, there have been few (if any) assessments into the applicability of the matrix-free approach to problems in solid mechanics. In this work, we perform an initial investigation on the application of the matrix-free approach to problems in quasi-static finite-strain hyperelasticity to determine whether it is viable for further extension. Specifically, we study different numerical implementations of the finite element tangent operator, and determine whether generalized methods of incorporating complex constitutive behavior might be feasible. In order to improve the convergence behavior of iterative solvers, we also propose a method by which to construct level tangent operators and employ them to define a geometric multigrid preconditioner. The performance of the matrix-free operator and the geometric multigrid preconditioner is compared to the matrix-based implementation with an algebraic multigrid preconditioner on a single node for a representative numerical example of a heterogeneous hyperelastic material in two and three dimensions. We conclude that the application of matrix-free methods to finite-strain solid mechanics is promising, and that is it possible to develop numerically efficient implementations that are independent of the hyperelastic constitutive law.
△ Less
Submitted 30 April, 2019;
originally announced April 2019.
-
Dissipation-consistent modelling and classification of extended plasticity formulations
Authors:
Andrew McBride,
B. Daya Reddy,
Paul Steinmann
Abstract:
A unified classification framework for models of extended plasticity is presented. The models include well known micromorphic and strain gradient plasticity formulations. A unified treatment is possible due to the representation of strain gradient plasticity as an Eringen-type micromorphic continua. The classification is based on the form of the energetic and dissipative model structures and explo…
▽ More
A unified classification framework for models of extended plasticity is presented. The models include well known micromorphic and strain gradient plasticity formulations. A unified treatment is possible due to the representation of strain gradient plasticity as an Eringen-type micromorphic continua. The classification is based on the form of the energetic and dissipative model structures and exploits the framework of dissipation-consistent modelling to elucidate the flow relation and yield condition. Models are identified as either serial or parallel. This designation is also applicable to familiar models of classical plasticity. Particular attention is paid to the rate-dependent problem arising from the choice of a smooth dissipation potential. The inability to locally determine the region of admissible stresses for the non-smooth (rate-independent) parallel models of plasticity is made clear.
△ Less
Submitted 29 January, 2018;
originally announced February 2018.
-
On the $h$-adaptive PUM and the $hp$-adaptive FEM approaches applied to PDEs in quantum mechanics
Authors:
Denis Davydov,
Tymofiy Gerasimov,
Jean-Paul Pelteret,
Paul Steinmann
Abstract:
In this paper the $h$-adaptive partition-of-unity method and the $h$- and $hp$-adaptive finite element method are applied to partial differential equations arising in quantum mechanics, namely, the Schrödinger equation with Coulomb and harmonic potentials, and the Poisson problem. Implementational details of the partition-of-unity method related to enforcing continuity with hanging nodes and the d…
▽ More
In this paper the $h$-adaptive partition-of-unity method and the $h$- and $hp$-adaptive finite element method are applied to partial differential equations arising in quantum mechanics, namely, the Schrödinger equation with Coulomb and harmonic potentials, and the Poisson problem. Implementational details of the partition-of-unity method related to enforcing continuity with hanging nodes and the degeneracy of the basis are discussed. The partition-of-unity method is equipped with an a posteriori error estimator, thus enabling implementation of error-controlled adaptive mesh refinement strategies. To that end, local interpolation error estimates are derived for the partition-of-unity method enriched with a class of exponential functions. The results are the same as for the finite element method and thereby admit the usage of standard residual error indicators. The efficiency of the $h$-adaptive partition-of-unity method is compared to the $h$- and $hp$-adaptive finite element method. The latter is implemented by adopting the analyticity estimate from Legendre coefficients. An extension of this approach to multiple solution vectors is proposed. Numerical results confirm the remarkable accuracy of the $h$-adaptive partition-of-unity approach. In case of the Hydrogen atom, the $h$-adaptive linear partition-of-unity method was found to be comparable to the $hp$-adaptive finite element method for the target eigenvalue accuracy of $10^{-3}$.
△ Less
Submitted 7 December, 2016;
originally announced December 2016.
-
A finite element implementation of surface elasticity at finite strains using the deal.II library
Authors:
Andrew McBride,
Ali Javili,
Paul Steinmann,
B Daya Reddy
Abstract:
The potentially significant role of the surface of an elastic body in the overall response of the continuum can be described using the mature theory of surface elasticity. The objective of this contribution is to detail the finite element approximation of the underlying governing equations (both in the volume and on its surface) and their solution using the open-source finite element library deal.…
▽ More
The potentially significant role of the surface of an elastic body in the overall response of the continuum can be described using the mature theory of surface elasticity. The objective of this contribution is to detail the finite element approximation of the underlying governing equations (both in the volume and on its surface) and their solution using the open-source finite element library deal.II. The fully-nonlinear (geometric and material) setting is considered. The nonlinear problem is solved using a Newton--Raphson procedure wherein the tangent contributions from the volume and surface are computed exactly. The finite element formulation is implemented within the total Lagrangian framework and a Bubnov-Galerkin spatial discretization of the volume and the surface employed. The surface is assumed material. A map between the degrees of freedom on the surface and on the boundary of the volume is used to allocate the contribution from the surface to the global system matrix and residual vector. The deal.II library greatly facilitates the computation of the various surface operators, allowing the numerical implementation to closely match the theory developed in a companion paper. Key features of the theory and the numerical implementation are elucidated using a series of benchmark example problems. The full, documented source code is provided.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
A theory of finite deformation magneto-viscoelasticity
Authors:
Prashant Saxena,
Mokarram Hossain,
Paul Steinmann
Abstract:
This paper deals with the mathematical modelling of large strain magneto-viscoelastic deformations. Energy dissipation is assumed to occur both due to the mechanical viscoelastic effects as well as the resistance offered by the material to magnetisation. Existence of internal dam** mechanisms in the body is considered by decomposing the deformation gradient and the magnetic induction into `elast…
▽ More
This paper deals with the mathematical modelling of large strain magneto-viscoelastic deformations. Energy dissipation is assumed to occur both due to the mechanical viscoelastic effects as well as the resistance offered by the material to magnetisation. Existence of internal dam** mechanisms in the body is considered by decomposing the deformation gradient and the magnetic induction into `elastic' and `viscous' parts. Constitutive laws for material behaviour and evolution equations for the non-equilibrium fields are derived that agree with the laws of thermodynamics. To illustrate the theory the problems of stress relaxation, magnetic field relaxation, time dependent magnetic induction and strain are formulated and solved for a specific form of the constitutive law. The results, that show the effect of several modelling parameters on the deformation and magnetisation process, are illustrated graphically.
△ Less
Submitted 9 February, 2015;
originally announced February 2015.
-
On rate-dependent dissipation effects in electro-elasticity
Authors:
Prashant Saxena,
Duc Khoi Vu,
Paul Steinmann
Abstract:
This paper deals with the mathematical modelling of large strain electro-viscoelastic deformations in electro-active polymers. Energy dissipation is assumed to occur due to mechanical viscoelasticity of the polymer as well as due to time-dependent effective polarisation of the material. Additive decomposition of the electric field $\mathbb{E} = \mathbb{E}_e + \mathbb{E}_v$ and multiplicative decom…
▽ More
This paper deals with the mathematical modelling of large strain electro-viscoelastic deformations in electro-active polymers. Energy dissipation is assumed to occur due to mechanical viscoelasticity of the polymer as well as due to time-dependent effective polarisation of the material. Additive decomposition of the electric field $\mathbb{E} = \mathbb{E}_e + \mathbb{E}_v$ and multiplicative decomposition of the deformation gradient $\mathbf{F} = \mathbf{F}_e \mathbf{F}_v$ are proposed to model the internal dissipation mechanisms. The theory is illustrated with some numerical examples in the end.
△ Less
Submitted 9 February, 2015;
originally announced February 2015.
