-
Capillary condensation under atomic-scale confinement
Authors:
Qian Yang,
P. Z. Sun,
L. Fumagalli,
Y. V. Stebunov,
S. J. Haigh,
Z. W. Zhou,
I. V. Grigorieva,
F. C. Wang,
A. K. Geim
Abstract:
Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena a…
▽ More
Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena and shown to hold well for liquid menisci with diameters as small as several nm. For even smaller capillaries that are involved in condensation under ambient humidity and, hence, of particular practical interest, the Kelvin equation is expected to break down, because the required confinement becomes comparable to the size of water molecules. Here we take advantage of van der Waals assembly of two-dimensional crystals to create atomic-scale capillaries and study condensation inside. Our smallest capillaries are less than 4 angstroms in height and can accommodate just a monolayer of water. Surprisingly, even at this scale, the macroscopic Kelvin equation using the characteristics of bulk water is found to describe accurately the condensation transition in strongly hydrophilic (mica) capillaries and remains qualitatively valid for weakly hydrophilic (graphene) ones. We show that this agreement is somewhat fortuitous and can be attributed to elastic deformation of capillary walls, which suppresses giant oscillatory behavior expected due to commensurability between atomic-scale confinement and water molecules. Our work provides a much-needed basis for understanding of capillary effects at the smallest possible scale important in many realistic situations.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Giant optical anisotropy in transition metal dichalcogenides for next-generation photonics
Authors:
G. A. Ermolaev,
D. V. Grudinin,
Y. V. Stebunov,
K. V. Voronin,
V. G. Kravets,
J. Duan,
A. B. Mazitov,
G. I. Tselikov,
A. Bylinkin,
D. I. Yakubovsky,
S. M. Novikov,
D. G. Baranov,
A. Y. Nikitin,
I. A. Kruglov,
T. Shegai,
P. Alonso-González,
A. N. Grigorenko,
A. V. Arsenin,
K. S. Novoselov,
V. S. Volkov
Abstract:
Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy was recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This inspir…
▽ More
Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy was recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This inspired an intensive search for giant optical anisotropy among natural and artificial materials. Here, we demonstrate that layered transition metal dichalcogenides (TMDCs) provide an answer to this quest owing to their fundamental differences between intralayer strong covalent bonding and weak interlayer van der Walls interaction. To do this, we carried out a correlative far- and near-field characterization validated by first-principle calculations that reveals an unprecedented birefringence of 1.5 in the infrared and 3 in the visible light for MoS2. Our findings demonstrate that this outstanding anisotropy allows for tackling the diffraction limit enabling an avenue for on-chip next-generation photonics.
△ Less
Submitted 11 January, 2021; v1 submitted 1 June, 2020;
originally announced June 2020.
-
Ultrathin and ultrasmooth gold films on monolayer MoS2
Authors:
Dmitry I. Yakubovsky,
Yury V. Stebunov,
Roman V. Kirtaev,
Georgy A. Ermolaev,
Mikhail S. Mironov,
Sergey M. Novikov,
Aleksey V. Arsenin,
Valentyn S. Volkov
Abstract:
Sub-10 nm continuous metal films are promising candidates for flexible and transparent nanophotonics and optoelectronics applications. In this Letter, we demonstrate that monolayer MoS2 is a perspective adhesion layer for the deposition of continuous conductive gold films with a thickness of only 3-4 nm. Optical properties of continuous ultrathin gold films deposited on two-dimensional MoS2 grown…
▽ More
Sub-10 nm continuous metal films are promising candidates for flexible and transparent nanophotonics and optoelectronics applications. In this Letter, we demonstrate that monolayer MoS2 is a perspective adhesion layer for the deposition of continuous conductive gold films with a thickness of only 3-4 nm. Optical properties of continuous ultrathin gold films deposited on two-dimensional MoS2 grown by chemical vapor deposition are investigated by spectroscopic ellipsometry over a wide wavelength range (300-3300 nm). Results show that optical losses in ultrathin films increase with decreasing thickness due to the fine-grained structure and the presence of a small number of voids, however, they exhibit metallic properties down to a thickness of 3-4 nm. The atomic-scale MoS2 interfaces can be transferred to any substrate and thus open up new opportunities for the creation of metasurfaces and a new type of van der Waals heterostructures with atomically thin metal layers.
△ Less
Submitted 29 December, 2018;
originally announced December 2018.
-
Direct S-matrix calculation for diffractive structures and metasurfaces
Authors:
Alexey A. Shcherbakov,
Yury V. Stebunov,
Denis F. Baidin,
Thomas Kampfe,
Yves Jourlin
Abstract:
The paper presents a derivation of analytical components of S-matrices for arbitrary planar diffractive structures and metasurfaces in the Fourier domain. Attained general formulas for S-matrix components can be applied within both formulations in the Cartesian and curvilinear metric. A numerical method based on these results can benefit from all previous improvements of the Fourier domain methods…
▽ More
The paper presents a derivation of analytical components of S-matrices for arbitrary planar diffractive structures and metasurfaces in the Fourier domain. Attained general formulas for S-matrix components can be applied within both formulations in the Cartesian and curvilinear metric. A numerical method based on these results can benefit from all previous improvements of the Fourier domain methods. In addition, we provide expressions for S-matrix calculation in case of periodically corrugated layers of 2D materials, which are valid for arbitrary corrugation depth-to-period ratios. As an example the derived equations are used to simulate resonant grating excitation of graphene plasmons and an impact of silica interlayer on corresponding reflection curves.
△ Less
Submitted 25 April, 2018; v1 submitted 22 December, 2017;
originally announced December 2017.
-
All-nanophotonic NEMS biosensor on a chip
Authors:
Dmitry Yu. Fedyanin,
Yury V. Stebunov
Abstract:
Integrated chemical and biological sensors give advantages in cost, size and weight reduction and open new prospects for parallel monitoring and analysis. Biosensors based on nanoelectromechanical systems (NEMS) are the most attractive candidates for the integrated platform. However, actuation and transduction techniques (e.g. electrostatic, magnetomotive, thermal or piezoelectric) limit their ope…
▽ More
Integrated chemical and biological sensors give advantages in cost, size and weight reduction and open new prospects for parallel monitoring and analysis. Biosensors based on nanoelectromechanical systems (NEMS) are the most attractive candidates for the integrated platform. However, actuation and transduction techniques (e.g. electrostatic, magnetomotive, thermal or piezoelectric) limit their operation to laboratory conditions. All-optical approach gives the possibility to overcome this problem, nevertheless, the existing schemes are either fundamentally macroscopic or excessively complicated and expensive in mass production. Here we propose a novel scheme of extremely compact NEMS biosensor monolithically integrated on a chip with all-nanophotonic transduction and actuation. It consists of the photonic waveguide and the nanobeam cantilever placed above the waveguide, both fabricated in the same CMOS-compatible process. Being in the near field of the strongly confined photonic mode, cantilever is efficiently actuated and its response is directly read out using the same optical waveguide, which results in a very high sensitivity and capability of single-molecule detection even in atmosphere.
△ Less
Submitted 29 October, 2014;
originally announced October 2014.