Showing 1–7 of 7 results for author: Srivastava, S K

Miniature fluorescence sensor for quantitative detection of brain tumour

Authors: Jean Pierre Ndabakuranye, James Belcourt, Deepak Sharma, Cathal D. O'Connell, Victor Mondal, Sanjay K. Srivastava, Alastair Stacey, Sam Long, Bobbi Fleiss, Arman Ahnood

Abstract: Fluorescence-guided surgery has emerged as a vital tool for tumour resection procedures. As well as intraoperative tumour visualisation, 5-ALA-induced PpIX provides an avenue for quantitative tumour identification based on ratiometric fluorescence measurement. To this end, fluorescence imaging and fibre-based probes have enabled more precise demarcation between the cancerous and healthy tissues. T… ▽ More Fluorescence-guided surgery has emerged as a vital tool for tumour resection procedures. As well as intraoperative tumour visualisation, 5-ALA-induced PpIX provides an avenue for quantitative tumour identification based on ratiometric fluorescence measurement. To this end, fluorescence imaging and fibre-based probes have enabled more precise demarcation between the cancerous and healthy tissues. These sensing approaches, which rely on collecting the fluorescence light from the tumour resection site and its remote spectral sensing, introduce challenges associated with optical losses. In this work, we demonstrate the viability of tumour detection at the resection site using a miniature fluorescence measurement system. Unlike the current bulky systems, which necessitate remote measurement, we have adopted a millimetre-sized spectral sensor chip for quantitative fluorescence measurements. A reliable measurement at the resection site requires a stable optical window between the tissue and the optoelectronic system. This is achieved using an antifouling diamond window, which provides stable optical transparency. The system achieved a sensitivity of 92.3% and specificity of 98.3% in detecting a surrogate tumour at a resolution of 1 x 1 mm2. As well as addressing losses associated with collecting and coupling fluorescence light in the current remote sensing approaches, the small size of the system introduced in this work paves the way for its direct integration with the tumour resection tools with the aim of more accurate interoperative tumour identification. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Journal ref: Lab on a Chip 24.4 (2024): 946-954

Fabrication of Periodic, Flexible and Porous Silicon Microwire Arrays with Controlled Diameter and Spacing: Effects on Optical properties

Authors: Anjali Saini, Mohammed Abdelhameed, Divya Rani, Wipakorn Jevasuwan, Naoki Fukata, Premshila Kumari, Sanjay K. Srivastava, Prathap Pathi, Arup Samanta, Mrinal Dutta

Abstract: A new method of introducing nanopores with spongy morphology during fabrication of size and pitch controlled flexible silicon microwires (SiMWs) in wafer scale is presented using nanosphere lithography technique in addition to metal catalyzed electroless etching technique by varying concentration of oxidant and introducing surfactant or co-solvents to the etching solution. For achieving self-assem… ▽ More A new method of introducing nanopores with spongy morphology during fabrication of size and pitch controlled flexible silicon microwires (SiMWs) in wafer scale is presented using nanosphere lithography technique in addition to metal catalyzed electroless etching technique by varying concentration of oxidant and introducing surfactant or co-solvents to the etching solution. For achieving self-assembled monolayer closed-pack pattern of SiO2 microparticles in wafer-scale simple spin coating process was used. The effect of variation of the etchant, oxidant and surfactant on the morphology and optical properties of SiMWs were studied. By simply controlling the diameter of SiO2 microparticles and concentration of H2O2 the size of the MWs as well as the introduction of pores could be controlled in wafer-scale. Average reflectance suppressed to below 8% in the broad spectral range of 400-800 nm for these porous, spongy and flexible SiMW arrays in wafer scale. The mechanism behind this formation of spongy, porous and flexible nature of the SiMWs is also demonstrated for a better understanding of the etching process. △ Less

Submitted 10 June, 2022; originally announced July 2022.

Comments: 22 pages 10 Figures

One-pot Liquid-Phase Synthesis of MoS$_2$-WS$_2$ van der Waals Heterostructures for Broadband Photodetection

Authors: Shaona Bose, Subhrajit Mukherjee, Subhajit Jana, Sanjeev Kumar Srivastava, Samit Kumar Ray

Abstract: Two dimensional (2D) van der Waals heterostructures (vdWHs) have their unique potential in facilitating the stacking of layers of different 2D materials for optoelectronic devices with superior characteristics at a reduced cost. However, the fabrication of large area all-2D heterostructures is still challenging towards realizing practical devices. In the present work, we have demonstrated a rapid… ▽ More Two dimensional (2D) van der Waals heterostructures (vdWHs) have their unique potential in facilitating the stacking of layers of different 2D materials for optoelectronic devices with superior characteristics at a reduced cost. However, the fabrication of large area all-2D heterostructures is still challenging towards realizing practical devices. In the present work, we have demonstrated a rapid yet simple, impurity free and highly efficient sonication-assisted chemical exfoliation approach to synthesize hybrid vdWHs based on 2D molybdenum disulphide (MoS$_2$) and tungsten disulphide (WS$_2$), with high yield. Microscopic and spectroscopic studies have confirmed the successful exfoliation of layered 2D materials and formation of their hybrid heterostructure. The co-existence of 2D MoS2 and WS2 in the vdW hybrid is established by optical absorption and Raman shift measurements along with their chemical stiochiometry determined by X-ray photoelectron spectroscopy. The spectral response of the vdWH/Si (2D/3D) heterojunction photodetector fabricated using the as-synthesized material is found to show superior broadband photoresponse compared to that shown by the individual 2D MoS$_2$ and WS$_2$ based devices. The peak responsivity is found to be ~2.15 A/W at a wavelength of ~560 nm for an applied bias of -5 V. The ease of fabrication and superior performance of the chemically synthesized vdWH-based devices have revealed their potential use for large area optoelectronic applications on Si compatible CMOS platforms. △ Less

Submitted 27 July, 2021; originally announced August 2021.

Comments: Total 25 pages and 12 figures including supporting data

Gravitational baryogenesis of cosmological constant dominated universe

Authors: Sudhir Kumar Srivastava, Ahmad T Ali, Anil Kumar Yadav

Abstract: In this paper, we have studied the gravitational baryogenesis of isotropic and homogeneous universe in the frame-work of general relativity. We investigate an exact and new solution of Einstein's field equations for FRW metric. Our solution represents a transitioning model of the universe which was expanding in decelerated mode and it transit in accelerated mode after dominance of cosmological con… ▽ More In this paper, we have studied the gravitational baryogenesis of isotropic and homogeneous universe in the frame-work of general relativity. We investigate an exact and new solution of Einstein's field equations for FRW metric. Our solution represents a transitioning model of the universe which was expanding in decelerated mode and it transit in accelerated mode after dominance of cosmological constant $Λ$. We observe that gravitational baryogenesis occurs in the derived universe and derived baryon entropy ratio is in good agreement with its observational value. △ Less

Submitted 12 August, 2021; v1 submitted 8 June, 2020; originally announced June 2020.

Comments: 8 Pages, 4 Figures, Accepted in Gravitation and Cosmology

Journal ref: Gravitation and Cosmology, 27, 331 - 337, (2021)

Structural and optical properties of beta irradiated YAlO3 single crystals

Authors: M. Suganya, K. Ganesan, P. Vijayakumar, S. Jakathamani, Amirdha Sher Gill, O. Annalakshmi, S. K. Srivastava, R. M. Sarguna, S. Ganesamoorthy

Abstract: We report on the growth, structural and optical properties of YAlO3 single crystals grown by optical floating zone technique. Powder X-ray diffraction and Raman spectroscopic studies confirm the phase purity of the crystals. Raman analysis reveals that the intensity and line-width of Raman bands increase significantly with beta irradiation indicating the formation of structural defects in YAlO3 la… ▽ More We report on the growth, structural and optical properties of YAlO3 single crystals grown by optical floating zone technique. Powder X-ray diffraction and Raman spectroscopic studies confirm the phase purity of the crystals. Raman analysis reveals that the intensity and line-width of Raman bands increase significantly with beta irradiation indicating the formation of structural defects in YAlO3 lattice. The optical properties are studied through UV-visible absorption, and photoluminescence emission and excitation spectroscopies under pre- and post- beta irradiation. The optical studies indicate the presence of Sm and Cr impurities by exhibiting characteristic emission lines in the orange red region. Further, a systematic study on the thermoluminescence (TL) characteristics of the crystal is also carried out at different doses of beta irradiation. The crystals exhibit a prominent TL glow peak at 239 C for less than 5 Gy doses while a weak second glow peak evolves at higher doses. Also, the crystals show a nearly linear dose response in the studied range from 0.1 to 10 Gy. The glow curve analysis reveals that the TL emission obeys the first order kinetics model. Based on the optical studies, the plausible mechanism for the TL glow curve is discussed in terms of the intrinsic defects and impurities that are present in the crystal. △ Less

Submitted 5 June, 2020; originally announced June 2020.

Comments: 21 pages, 9 figures; Accepted for publication in "Optical Materials"

Growth of SiO2 microparticles by using modified Stober method: Effect of ammonia solution concentration and TEOS concentration

Authors: Shrestha Bhattacharya, Aishik Basu Malick, Mrinal Dutta, Sanjay K. Srivastava, P. Prathap, C. M. S. Rauthan

Abstract: The unique structural features and suitability of the SiO2 micro particles in different application areas have mobilized a worldwide interest in the last few decades. In this report a classical method known as the Stober method has been used to synthesize silica micro spheres. These microparticles have been synthesized by the reaction of tetraethyl orthosilicate (Si(OC2H5)4, TEOS) (silica precurso… ▽ More The unique structural features and suitability of the SiO2 micro particles in different application areas have mobilized a worldwide interest in the last few decades. In this report a classical method known as the Stober method has been used to synthesize silica micro spheres. These microparticles have been synthesized by the reaction of tetraethyl orthosilicate (Si(OC2H5)4, TEOS) (silica precursor) with water in an alcoholic medium (e.g. ethanol) in the presence of KCl electrolyte and ammonia as a catalyst. It has been observed that the size of the microparticles closely depends on the amount of the TEOS and ammonia. A decrease in the size of micro particles from 2.1 micrometer to 1.7 micrometer has been confirmed as the amount of TEOS increases from 3.5 ml to 6.4 ml respectively. In similar way a decrease in the diameter of the micro particles from 2.1 micrometer to 1.7 micrometer has been observed with increase in the ammonia content from 3 ml to 9 ml. △ Less

Submitted 20 September, 2019; originally announced September 2019.

Comments: 4 page, 2 Figures

Performance limitation of Si Nanowire solar cells: Effects of nanowire length and surface defects

Authors: Deepika Bora, Shrestha Bhattacharya, Nitin Kumar, Aishik Basu Mallick, Avriti Srivastava, Mrinal Dutta, Sanjay K. Srivastava, P. Prathap, C. M. S. Rauthan

Abstract: In Si nanowire (SiNW) solar cells enhanced light confinement property in addition to decoupling of charge carrier collection and light absorption directions plays a significant role to resolve the draw backs of bulk Si solar cells. In this report we have studied the dependence of the phovoltaic properties of Si NW array solar cells on the SiNW length and enhanced surface defect states as a result… ▽ More In Si nanowire (SiNW) solar cells enhanced light confinement property in addition to decoupling of charge carrier collection and light absorption directions plays a significant role to resolve the draw backs of bulk Si solar cells. In this report we have studied the dependence of the phovoltaic properties of Si NW array solar cells on the SiNW length and enhanced surface defect states as a result of enhanced surface area of the NWs. The SiNW arrays have been fabricated using metal catalyzed electroless etching (MCEE) technique. p-n junction has been produced by spin-on-dopant technique followed by thermal diffusion process. Front and rear electrodes have been deposited by e-beam evaporation techniques. SiNW lengths have been controlled from ~ 320 nm to 6.4 micro meter by controlling the parameters of MCEE technique. Photovoltaic properties of the solar cells have been characterized by measuring quantum efficiency and photocurrent density vs. voltage characteristics. Morphological studies have been carried out by using scanning electron microscopy. Reduction in light trap** capability comes at the benefit of reduced surface defects. The reduction of surface defects has been proved to be more advantageous in comparison to the decrement of light trap** capability. The major contribution to the changes in cell efficiency comes from the enhancement of short circuit current density with a very weak dependence on open circuit voltage. This work is beneficial for the production commercial Si solar cell where SiNW arrays could be used as a antireflection coating instead of using separate antireflection layers and thus could reduced the production cost. △ Less

Submitted 16 September, 2019; originally announced September 2019.

Comments: 6 pages, 3 Figures and 1 Table