-
Data Format Standardization and DICOM Integration for Hyperpolarized 13C MRI
Authors:
Ernesto Diaz,
Renuka Sriram,
Jeremy W. Gordon,
Avantika Sinha,
Xiaoxi Liu,
Sule Sahin,
Jason Crane,
Marram P Olson,
Hsin-Yu Chen,
Jenna Bernard,
Daniel B. Vigneron,
Zhen Jane Wang,
Duan Xu,
Peder E. Z. Larson
Abstract:
Hyperpolarized (HP) 13C MRI has shown promise as a valuable modality for in vivo measurements of metabolism and is currently in human trials at 15 research sites worldwide. With this growth it is important to adopt standardized data storage practices as it will allow sites to meaningfully compare data.
In this paper we (1) describe data that we believe should be stored and (2) demonstrate pipeli…
▽ More
Hyperpolarized (HP) 13C MRI has shown promise as a valuable modality for in vivo measurements of metabolism and is currently in human trials at 15 research sites worldwide. With this growth it is important to adopt standardized data storage practices as it will allow sites to meaningfully compare data.
In this paper we (1) describe data that we believe should be stored and (2) demonstrate pipelines and methods that utilize the Digital Imaging and Communications in Medicine (DICOM) standard. This includes proposing a set of minimum set of information that is specific to HP 13C MRI studies. We then show where the majority of these can be fit into existing DICOM Attributes, primarily via the "Contrast/Bolus" module.
We also demonstrate pipelines for utilizing DICOM for HP 13C MRI. DICOM is the most common standard for clinical medical image storage and provides the flexibility to accommodate the unique aspects of HP 13C MRI, including the HP agent information but also spectroscopic and metabolite dimensions. The pipelines shown include creating DICOM objects for studies on human and animal imaging systems with various pulse sequences. We also show a python-based method to efficiently modify DICOM objects to incorporate the unique HP 13C MRI information that is not captured by existing pipelines. Moreover, we propose best practices for HP 13C MRI data storage that will support future multi-site trials, research studies and technical developments of this imaging technique.
△ Less
Submitted 5 May, 2024;
originally announced May 2024.
-
Control of bow shock induced three-dimensional separation using bleed through holes
Authors:
Hemanth Chandravamsi,
Sourabh Bhardwaj,
K. Ramachandra,
R. Sriram
Abstract:
The unsteady three-dimensional separated flow on a wall induced by a square protrusion (approximately twice the local boundary layer thickness in width and height), and its control by means of passive suction through holes, is investigated using wind tunnel experiments at Mach $2.87$. The baseline flow without any control was characterized and compared against the cases with bleed. A bow-shaped se…
▽ More
The unsteady three-dimensional separated flow on a wall induced by a square protrusion (approximately twice the local boundary layer thickness in width and height), and its control by means of passive suction through holes, is investigated using wind tunnel experiments at Mach $2.87$. The baseline flow without any control was characterized and compared against the cases with bleed. A bow-shaped separation line on the wall with a mid-span separation length of $5.57δ$ from protrusion face was traced from oil-flow visualization. The averaged pressure distribution surveyed using static pressure ports placed on the wall has mapped plateau, high-pressure, and a low-pressure region in the separated flow, distinctive to three-dimensional interactions. Ten control configurations were tested with suction holes placed along mid-span in the different pressure zones. Significant spanwise `Mean Reduction in Separation Length' of up to $0.93δ$ was observed from oil-flow visualization. A comparison of observations from various control configurations suggested that bleeding the flow from the high-pressure region could in general delay the separation and reduce the bubble size. Further, time-resolved schlieren visualizations have confirmed reduction in both `mid-span separation length' and `shock-intermittent-region' with the introduction of suction in high-pressure region. Fourier and Proper Orthogonal Decomposition analysis done on the schlieren data has confirmed the presence of low-frequency separation-shock oscillations at Strouhal Numbers of order $10^{-2}$, both with and without control. Furthermore, the amplitudes of separation-shock oscillations in the spectrum were reduced with the introduction of suction simultaneously from two holes placed in high and low-pressure regions.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
Unsteady pulsating flowfield over spiked axisymmetric forebody at hypersonic flows
Authors:
S. Mohammed Ibrahim,
R. Sriram,
S. K. Karthick,
G. Jagadeesh
Abstract:
The paper gives experimental observations on the hypersonic flow past an axisymmetric flat-face cylinder with a protruding sharp-tip spike at a freestream Mach number of $M_\infty = 8.16$ at two different freestream Reynolds numbers based on the base body diameter ($Re_D = 0.76 \times 10^6$, and $3.05 \times 10^6$). Furthermore, modal analysis is done on schlieren images to understand the flow dyn…
▽ More
The paper gives experimental observations on the hypersonic flow past an axisymmetric flat-face cylinder with a protruding sharp-tip spike at a freestream Mach number of $M_\infty = 8.16$ at two different freestream Reynolds numbers based on the base body diameter ($Re_D = 0.76 \times 10^6$, and $3.05 \times 10^6$). Furthermore, modal analysis is done on schlieren images to understand the flow dynamics parallel with the unsteady pressure measurements. The protruding spike of length to base body diameter ratio of $[l/D]=1$ creates a familiar unsteady flowfield called 'pulsation.' Pressure loading and fluctuation intensity at two different $Re_D$ cases are calculated. A maximum drop of 98.24\% is observed in both parameters between the high and low ReD cases. Based on the analysis, a difference in the pulsation characteristics are noticed, which arise from two vortical zones, each from a system of two `$λ$' shocks formed during the `collapse' phase ahead of the base body. The interaction of shedding vortices from the $λ$-shocks' triple-points, along with the rotating stationary waves, contributes to the asymmetric high-pressure loading and the observation of shock pulsation on the flat-face cylinder. The vortical interactions form the second dominant spatial mode with a temporal mode carrying a dimensionless frequency ($f_2D/u_\infty \approx 0.34$) almost twice that of the fundamental frequency ($f_1D/u_\infty \approx 0.17$). The observed frequencies are invariant irrespective of the ReD cases. However, for the high-frequency range, the spectral pressure decay is observed to follow an inverse and -7/3 law for the low and high $Re_D$ cases, respectively.
△ Less
Submitted 19 December, 2021; v1 submitted 5 November, 2021;
originally announced November 2021.