-
Bent Crystal Design and Characterization for High-Energy Physics Experiments
Authors:
Marco Romagnoni,
Vincenzo Guidi,
Laura Bandiera,
Davide De Salvador,
Andrea Mazzolari,
Francesco Sgarbossa,
Mattia Soldani,
Alexei Sytov,
Melissa Tamisari
Abstract:
Bent crystal are widely used as optics for X-rays, but via the phenomenon of planar channeling they may act as waveguide for relativistic charged particles beam as well, outperforming some of the traditional technologies currently employed. A physical description of the phenomenon and the resulting potential for applications in a particle accelerator is reported. The elastic properties of the anis…
▽ More
Bent crystal are widely used as optics for X-rays, but via the phenomenon of planar channeling they may act as waveguide for relativistic charged particles beam as well, outperforming some of the traditional technologies currently employed. A physical description of the phenomenon and the resulting potential for applications in a particle accelerator is reported. The elastic properties of the anisotropic crystal lattice medium are discussed, introducing different types of curvature which can enable a wide array of bending schemes optimized for each different case features. The technological development of machining strategy and bending solutions useful for the fabrication of crystals suitable in high energy particle manipulations are described. As well as the high precision characterization processes developed in order to satisfy the strict requirements for installation in an accelerator. Finally, the characterization of channeling phenomenon in bent crystal is described, pointing out several experimental setups suitable to comply each specific case constrains.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Radiation in oriented crystals: Innovative application to future positron sources
Authors:
Mattia Soldani,
Fahad Alharthi,
Laura Bandiera,
Nicola Canale,
Gianluca Cavoto,
Iryna Chaikovska,
Robert Chehab,
Vincenzo Guidi,
Viktar Haurylavets,
Andrea Mazzolari,
Riccardo Negrello,
Gianfranco Paternò,
Marco Romagnoni,
Alexei Sytov,
Victor Tikhomirov
Abstract:
It has been known since decades that the alignment of a beam of high-energy electrons with particular crystal directions involves a significant increase of bremsstrahlung radiation emission. This enhancement lies at the conceptual foundation of innovative positron source schemes for future lepton colliders. In particular, the so-called hybrid scheme makes use of a heavy-metal radiator in crystalli…
▽ More
It has been known since decades that the alignment of a beam of high-energy electrons with particular crystal directions involves a significant increase of bremsstrahlung radiation emission. This enhancement lies at the conceptual foundation of innovative positron source schemes for future lepton colliders. In particular, the so-called hybrid scheme makes use of a heavy-metal radiator in crystalline form, which is then followed by an amorphous metallic converter for positron generation from electrons by means of a two-step electromagnetic process. This work presents the most recent simulation results obtained on the development of a hybrid positron source for the FCC-$ee$ from the standpoint of the features of both the crystalline radiator and the amorphous converter.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
Beam test, simulation, and performance evaluation of PbF$_2$ and PWO-UF crystals with SiPM readout for a semi-homogeneous calorimeter prototype with longitudinal segmentation
Authors:
C. Cantone,
S. Carsi,
S. Ceravolo,
E. Di Meco,
E. Diociaiuti,
I. Frank,
S. Kholodenko,
S. Martellotti,
M. Mirra,
P. Monti-Guarnieri,
M. Moulson,
D. Paesani,
M. Prest,
M. Romagnoni,
I. Sarra,
F. Sgarbossa,
M. Soldani,
E. Vallazza
Abstract:
Crilin (Crystal Calorimeter with Longitudinal Information) is a semi-homogeneous, longitudinally segmented electromagnetic calorimeter based on high-$Z$, ultra-fast crystals with UV-extended SiPM readout. The Crilin design has been proposed as a candidate solution for both a future Muon Collider barrel ECAL and for the Small Angle Calorimeter of the HIKE experiment. As a part of the Crilin develop…
▽ More
Crilin (Crystal Calorimeter with Longitudinal Information) is a semi-homogeneous, longitudinally segmented electromagnetic calorimeter based on high-$Z$, ultra-fast crystals with UV-extended SiPM readout. The Crilin design has been proposed as a candidate solution for both a future Muon Collider barrel ECAL and for the Small Angle Calorimeter of the HIKE experiment. As a part of the Crilin development program, we have carried out beam tests of small ($10\times10\times40$~mm$^3$) lead fluoride (PbF$_2$) and ultra-fast lead tungstate (PbWO$_4$, PWO) crystals with 120~GeV electrons at the CERN SPS to study the light yield, timing response, and systematics of light collection with a proposed readout scheme. For a single crystal of PbF$_2$, corresponding to a single Crilin cell, a time resolution of better than 25~ps is obtained for $>$3 GeV of deposited energy. For a single cell of \pwo, a time resolution of better than 45~ps is obtained for the same range of deposited energy. This timing performance fully satisfies the design requirements for the Muon Collider and HIKE experiments. Further optimizations of the readout scheme and crystal surface preparation are expected to bring further improvements.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
HIKE, High Intensity Kaon Experiments at the CERN SPS
Authors:
E. Cortina Gil,
J. Jerhot,
N. Lurkin,
T. Numao,
B. Velghe,
V. W. S. Wong,
D. Bryman,
L. Bician,
Z. Hives,
T. Husek,
K. Kampf,
M. Koval,
A. T. Akmete,
R. Aliberti,
V. Büscher,
L. Di Lella,
N. Doble,
L. Peruzzo,
M. Schott,
H. Wahl,
R. Wanke,
B. Döbrich,
L. Montalto,
D. Rinaldi,
F. Dettori
, et al. (154 additional authors not shown)
Abstract:
A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the St…
▽ More
A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the Standard Model. The experimental programme is based on a staged approach involving experiments with charged and neutral kaon beams, as well as operation in beam-dump mode. The various phases will rely on a common infrastructure and set of detectors.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
A high-performance custom photodetection system to probe the light yield enhancement in oriented crystals
Authors:
M. Soldani,
L. Bandiera,
L. Bomben,
C. Brizzolari,
R. Camattari,
D. De. Salvador,
V. Guidi,
V. Haurylavets,
E. Lutsenko,
T. Maiolino,
V. Mascagna,
A. Mazzolari,
M. Prest,
M. Romagnoni,
F. Ronchetti,
A. Selmi,
A. Sytov,
V. Tikhomirov,
E. Vallazza
Abstract:
Scintillating homogeneous detectors represent the state of the art in electromagnetic calorimetry. Moreover, the currently neglected crystalline nature of the most common inorganic scintillators can be exploited to achieve an outstanding performance boost in terms of compactness and energy resolution. In fact, it was recently demonstrated by the AXIAL/ELIOT experiments that a strong reduction in t…
▽ More
Scintillating homogeneous detectors represent the state of the art in electromagnetic calorimetry. Moreover, the currently neglected crystalline nature of the most common inorganic scintillators can be exploited to achieve an outstanding performance boost in terms of compactness and energy resolution. In fact, it was recently demonstrated by the AXIAL/ELIOT experiments that a strong reduction in the radiation length inside PWO, and a subsequent enhancement in the scintillation light emitted per unit thickness, are attained when the incident particle trajectory is aligned with a crystal axis within $\sim 1^\circ$. A SiPM-based system has been developed to directly probe this remarkable effect by measuring the scintillation light emitted by a PWO sample. The same concept could be applied to full-scale detectors that would feature a design significantly more compact than currently achievable and unparalleled resolution in the range of interest for present and future experiments.
△ Less
Submitted 12 July, 2022;
originally announced July 2022.
-
Crystal-based pair production for a lepton collider positron source
Authors:
L. Bandiera,
L. Bomben,
R. Camattari,
G. Cavoto,
I. Chaikovska,
R. Chehab,
D. De Salvador,
V. Guidi,
V. Haurylavets,
E. Lutsenko,
V. Mascagna,
A. Mazzolari,
M. Prest,
M. Romagnoni,
F. Ronchetti,
F. Sgarbossa,
M. Soldani,
A. Sytov,
M. Tamisari,
V. Tikhomirov,
E. Vallazza
Abstract:
An intense positron sources is a demanding element in the design of future lepton colliders. A crystal-based hybrid positron source could be an alternative to a more conventional scheme based on the electron conversion into positron in a thick amorphous target. The conceptual idea of the hybrid source is to have two separate objects, a photon radiator and a photon-to-positron converter target. In…
▽ More
An intense positron sources is a demanding element in the design of future lepton colliders. A crystal-based hybrid positron source could be an alternative to a more conventional scheme based on the electron conversion into positron in a thick amorphous target. The conceptual idea of the hybrid source is to have two separate objects, a photon radiator and a photon-to-positron converter target. In such a scheme an electron beam crosses a thin axially oriented crystal with the emission of a channeling radiation, characterized by a considerably larger amount of photons if compared to Bremsstrahlung. The net result is an increase in the number of produced positrons at the converter target. In this paper we present the results of a beam test conducted at the DESY TB 21 with 5.6 GeV electron beam and a crystalline tungsten radiator. Experimental data clearly highlight an increased production of photons and they are critically compared with the outcomes of novel method to simulate the number of radiated photons, showing a very good agreement. Strong of this, the developed simulation tool has been exploited to design a simple scheme for a positron source based on oriented crystal, demonstrating the advantages in terms of reduction of both deposited energy and the peak energy deposition density if compared to conventional sources. The presented work opens the way for a realistic and detailed design of a hybrid crystal-based positron source for future lepton colliders.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
First design of a crystal-based extraction of 6 GeV electrons for the DESY II Booster Synchrotron
Authors:
A. Sytov,
G. Kube,
L. Bandiera,
P. Cirrone,
H. Ehrlichmann,
V. Guidi,
V. Haurylavets,
M. Romagnoni,
M. Soldani,
M. Stanitzki,
M. Tamisari,
V. Tikhomirov,
K. Wittenburg,
A. Mazzolari
Abstract:
A proof-of-principle experimental setup for the extraction of 6 GeV electrons from the DESY II Booster Synchrotron using the channeling effect in a bent crystal is elaborated. Various aspects of the experimental setup were investigated in detail, such as the particle beam dynamics during the extraction process, the manufacturing and characterization of bent crystals, and the detection of the extra…
▽ More
A proof-of-principle experimental setup for the extraction of 6 GeV electrons from the DESY II Booster Synchrotron using the channeling effect in a bent crystal is elaborated. Various aspects of the experimental setup were investigated in detail, such as the particle beam dynamics during the extraction process, the manufacturing and characterization of bent crystals, and the detection of the extracted beam. In order to optimize the crystal geometry, the overall process of beam extraction was simulated, taking into account the influence of radiation energy losses. As result it is concluded that the multi-turn electron beam extraction efficiency can reach up to 16 %.
In principle this crystal-based beam extraction technique can be applied at any electron synchrotron in order to provide multi-GeV electron beams in a parasitic mode. This technique will allow to supply fixed-target experiments by intense high-quality monoenergetic electron beams. Furthermore, electron/positron crystal-based extraction from future lepton colliders may provide an access to unique experimental conditions for ultra-high energy fixed-target experiments including searches for new physics beyond the Standard Model.
△ Less
Submitted 2 December, 2021; v1 submitted 19 October, 2021;
originally announced October 2021.
-
Muon detection in electron-positron annihilation for muon collider studies
Authors:
N. Amapane,
M. Antonelli,
F. Anulli,
G. Ballerini,
L. Bandiera,
N. Bartosik,
M. Bauce,
A. Bertolin,
C. Biino,
O. R. Blanco- Garcia,
M. Boscolo,
C. Brizzolari,
A. Cappati,
F. Casaburo,
M. Casarsa,
G. Cavoto,
G. Cesarini,
F. Collamati,
G. Cotto,
C. Curatolo,
R. Di Nardo,
F. Gonella,
S. Hoh,
M. Iafrati,
F. Iacoangeli
, et al. (21 additional authors not shown)
Abstract:
The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study particle collisions at up to tens of TeV energy, while offering a cleaner experimental environment with respect to hadronic colliders. One key element in the muon collider design is the low-emittance muon production. Recently,…
▽ More
The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study particle collisions at up to tens of TeV energy, while offering a cleaner experimental environment with respect to hadronic colliders. One key element in the muon collider design is the low-emittance muon production. Recently,the Low EMittance Muon Accelerator (LEMMA) collaboration has explored the muon pair production close to its kinematic threshold by annihilating 45 GeV positrons with electrons in a low Z material target. In this configuration, muons are emerging from the target with a naturally low-emittance. In this paper we describe the performance of a system, to study this production mechanism, that consists in several segmented absorbers with alternating active layers composed of fast Cherenkov detectors together with a muon identification technique based on this detector. Passive layers were made of tungsten. We collected data corresponding to muon and electron beams produced at the H2 line in the North Area of the European Organization for Nuclear Research (CERN) in September 2018.
△ Less
Submitted 31 October, 2021; v1 submitted 26 May, 2021;
originally announced May 2021.
-
Investigation on steering of ultrarelativistic $e^{\pm}$ beam through an axially oriented bent crystal
Authors:
L. Bandiera,
I. V. Kyryllin,
C. Brizzolari,
R. Camattari,
N. Charitonidis,
D. De Salvador,
V. Guidi,
V. Mascagna,
A. Mazzolari,
M. Prest,
M. Romagnoni,
N. F. Shul'ga,
M. Soldani,
A. Sytov,
E. Vallazza
Abstract:
An investigation on stochastic deflection of high-energy charged particles in a bent crystal was carried out. In particular, we investigated the deflection efficiency under axial confinement of both positively and negatively charged particles as a function of the crystal orientation, the choice of the bending plane, and of the charge sign. Analytic estimations and numerical simulations were compar…
▽ More
An investigation on stochastic deflection of high-energy charged particles in a bent crystal was carried out. In particular, we investigated the deflection efficiency under axial confinement of both positively and negatively charged particles as a function of the crystal orientation, the choice of the bending plane, and of the charge sign. Analytic estimations and numerical simulations were compared with dedicated experiments at the H4 secondary beam line of SPS North Area, with 120 GeV/$c$ electrons and positrons. In the work presented in this article, the optimal orientations of the plane of bending of the crystal, which allow deflecting the largest number of charged particles using a bent crystal in axial orientation, were found.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
-
Investigation on radiation generated by Sub-GeV electrons in ultrashort Si and Ge bent crystals
Authors:
L. Bandiera,
A. Sytov,
D. De Salvador,
A. Mazzolari,
E. Bagli,
R. Camattari,
S. Carturan,
C. Durighello,
G. Germogli,
V. Guidi,
P. Klag,
W. Lauth,
G. Maggioni,
V. Mascagna,
M. Prest,
M. Romagnoni,
M. Soldani,
V. V. Tikhomirov,
E. Vallazza
Abstract:
We report on the measurements of the spectra of gamma radiation generated by 855 MeV electrons in bent silicon and germanium crystals at MAMI (MAinzer MIkrotron). The crystals were 15 μm thick along the beam direction to ensure high deflection efficiency. Their (111) crystalline planes were bent by means of a piezo-actuated mechanical holder, which allowed to remotely change the crystal curvature.…
▽ More
We report on the measurements of the spectra of gamma radiation generated by 855 MeV electrons in bent silicon and germanium crystals at MAMI (MAinzer MIkrotron). The crystals were 15 μm thick along the beam direction to ensure high deflection efficiency. Their (111) crystalline planes were bent by means of a piezo-actuated mechanical holder, which allowed to remotely change the crystal curvature. In such a way it was possible to investigate the radiation emitted under planar channeling and volume reflection as a function of the curvature of the crystalline planes. We show that using volume reflection, one can produce intense gamma radiation with comparable intensity but higher angular acceptance than for channeling. We studied the trade-off between radiation intensity and angular acceptance at different values of the crystal curvature. The measurements of radiation spectra have been carried out for the first time in bent Germanium crystals. In particular, the intensity of radiation in the Ge crystal is higher than in the Si one due to the higher atomic number, which is important for the development of the X-ray and gamma radiation sources based on higher-Z deformed crystals, such as crystalline undulator.
△ Less
Submitted 28 November, 2020; v1 submitted 23 June, 2020;
originally announced June 2020.
-
Study of muon pair production from positron annihilation at threshold energy
Authors:
N. Amapane,
M. Antonelli,
F. Anulli,
G. Ballerini,
L. Bandiera,
N. Bartosik,
M. Bauce,
A. Bertolin,
C. Biino,
O. R. Blanco-Garcia,
M. Boscolo,
C. Brizzolari,
A. Cappati,
M. Casarsa,
G. Cavoto,
F. Collamati,
G. Cotto,
C. Curatolo,
R. Di Nardo,
F. Gonella,
S. Hoh,
M. Iafrati,
F. Iacoangeli,
B. Kiani,
D. Lucchesi
, et al. (17 additional authors not shown)
Abstract:
The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small…
▽ More
The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small transverse emittance beams without any additional beam cooling. However most of the measurements available are performed at higher $\sqrt{s}$ values. It is therefore necessary to measure muons production in positron annihilation at threshold energy and compare the experimental results with the predictions in this specific energy regime. Apart from being a topic of physical interest by itself, these near to threshold measurements can have a sizeable impact on the estimation of the ultimate luminosity achievable in a muon collider with the LEMMA injection scheme.
△ Less
Submitted 10 January, 2020; v1 submitted 30 September, 2019;
originally announced September 2019.
-
The ENUBET narrow band neutrino beam
Authors:
ENUBET Collaboration,
M. Tenti,
F. Acerbi,
G. Ballerini,
M. Bonesini,
C. Brizzolari,
G. Brunetti M. Calviani,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
G. Collazuol,
E. Conti F. Dal Corso,
G. De Rosa,
C. Delogu,
A. Falcone,
B. Goddard,
A. Gola,
R. A. Intonti,
C. Jollet,
V. Kain,
B. Klicek,
Y. Kudenko,
M. Laveder,
A. Longhin
, et al. (32 additional authors not shown)
Abstract:
The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully contr…
▽ More
The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully controlled $ν_{e}$ source at the GeV scale for a new generation of short baseline experiments. In this contribution the performances of the positron tagger prototypes tested at CERN beamlines in 2016-2018 are presented.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
The ENUBET Beamline
Authors:
ENUBET Collaboration,
G. Brunetti,
F. Acerbi,
G. Ballerini,
M. Bonesini,
A. Branca,
C. Brizzolari,
M. Calviani,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
C. Delogu,
A. Falcone,
B. Goddard,
A. Gola,
R. A. Intonti,
C. Jollet,
V. Kain,
B. Klicek,
Y. Kudenko
, et al. (34 additional authors not shown)
Abstract:
The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline…
▽ More
The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline based on a dipole coupled to a pair of quadrupole triplets along with the optimisation guidelines and the results of a simulation based on G4beamline. A static focusing design, though less efficient than a horn-based solution, results several times more efficient than originally expected. It works with slow proton extractions reducing drastically pile-up effects in the decay tunnel and it paves the way towards a time-tagged neutrino beam. On the other hand a horn-based transferline would ensure higher yields at the tunnel entrance. The first studies conducted at CERN to implement the synchronization between a few ms proton extraction and a horn pulse of 2-10 ms are also described.
△ Less
Submitted 26 November, 2020; v1 submitted 21 March, 2019;
originally announced March 2019.
-
Identification of particles with Lorentz factor up to $10^{4}$ with Transition Radiation Detectors based on micro-strip silicon detectors
Authors:
J. Alozy,
N. Belyaev,
M. Campbell,
M. Cherry,
F. Dachs,
S. Doronin,
K. Filippov,
P. Fusco,
F. Gargano,
E. Heijne,
S. Konovalov,
D. Krasnopevtsev,
X. Llopart,
F. Loparco,
V. Mascagna,
M. N. Mazziotta,
H. Pernegger,
D. Ponomarenko,
M. Prest,
D. Pyatiizbyantseva,
R. Radomskii,
C. Rembser,
A. Romaniouk,
A. A. Savchenko,
D. Schaefer
, et al. (17 additional authors not shown)
Abstract:
This work is dedicated to the study of a technique for hadron identification in the TeV momentum range, based on the simultaneous measurement of the energies and of the emission angles of the Transition Radiation (TR) X-rays with respect to the radiating particles. A detector setup has been built and tested with particles in a wide range of Lorentz factors (from about $10^3$ to about…
▽ More
This work is dedicated to the study of a technique for hadron identification in the TeV momentum range, based on the simultaneous measurement of the energies and of the emission angles of the Transition Radiation (TR) X-rays with respect to the radiating particles. A detector setup has been built and tested with particles in a wide range of Lorentz factors (from about $10^3$ to about $4 \times 10^4$ crossing different types of radiators. The measured double-differential (in energy and angle) spectra of the TR photons are in a reasonably good agreement with TR simulation predictions.
△ Less
Submitted 22 February, 2019; v1 submitted 31 January, 2019;
originally announced January 2019.
-
Irradiation and performance of RGB-HD Silicon Photomultipliers for calorimetric applications
Authors:
F. Acerbi,
G. Ballerini,
A. Berra,
C. Brizzolari,
G. Brunetti,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
A. Coffani,
G. Collazuol,
E. Conti,
F. Dal Corso,
C. Delogu,
G. De Rosa,
A. Gola,
R. A. Intonti,
C. Jollet,
Y. Kudenko,
A. Longhin,
L. Ludovici,
L. Magaletti,
G. Mandrioli,
A. Margotti,
V. Mascagna,
N. Mauri
, et al. (19 additional authors not shown)
Abstract:
Silicon Photomultipliers with cell-pitch ranging from 12 $μ$m to 20 $μ$m were tested against neutron irradiation at moderate fluences to study their performance for calorimetric applications. The photosensors were developed by FBK employing the RGB-HD technology. We performed irradiation tests up to $2 \times 10^{11}$ n/cm$^2$ (1 MeV eq.) at the INFN-LNL Irradiation Test facility. The SiPMs were c…
▽ More
Silicon Photomultipliers with cell-pitch ranging from 12 $μ$m to 20 $μ$m were tested against neutron irradiation at moderate fluences to study their performance for calorimetric applications. The photosensors were developed by FBK employing the RGB-HD technology. We performed irradiation tests up to $2 \times 10^{11}$ n/cm$^2$ (1 MeV eq.) at the INFN-LNL Irradiation Test facility. The SiPMs were characterized on-site (dark current and photoelectron response) during and after irradiations at different fluences. The irradiated SiPMs were installed in the ENUBET compact calorimetric modules and characterized with muons and electrons at the CERN East Area facility. The tests demonstrate that both the electromagnetic response and the sensitivity to minimum ionizing particles are retained after irradiation. Gain compensation can be achieved increasing the bias voltage well within the operation range of the SiPMs. The sensitivity to single photoelectrons is lost at $\sim 10^{10}$ n/cm$^2$ due to the increase of the dark current.
△ Less
Submitted 24 January, 2019;
originally announced January 2019.
-
A high precision neutrino beam for a new generation of short baseline experiments
Authors:
F. Acerbi,
G. Ballerini,
S. Bolognesi,
M. Bonesini,
C. Brizzolari,
G. Brunetti,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
F. Di Lodovico,
C. Delogu,
A. Falcone,
A. Gola,
R. A. Intonti,
C. Jollet,
B. Klicek,
Y. Kudenko,
M. Laveder,
A. Longhin,
L. Ludovici
, et al. (31 additional authors not shown)
Abstract:
The current generation of short baseline neutrino experiments is approaching intrinsic source limitations in the knowledge of flux, initial neutrino energy and flavor. A dedicated facility based on conventional accelerator techniques and existing infrastructures designed to overcome these impediments would have a remarkable impact on the entire field of neutrino oscillation physics. It would impro…
▽ More
The current generation of short baseline neutrino experiments is approaching intrinsic source limitations in the knowledge of flux, initial neutrino energy and flavor. A dedicated facility based on conventional accelerator techniques and existing infrastructures designed to overcome these impediments would have a remarkable impact on the entire field of neutrino oscillation physics. It would improve by about one order of magnitude the precision on $ν_μ$ and $ν_e$ cross sections, enable the study of electroweak nuclear physics at the GeV scale with unprecedented resolution and advance searches for physics beyond the three-neutrino paradigm. In turn, these results would enhance the physics reach of the next generation long baseline experiments (DUNE and Hyper-Kamiokande) on CP violation and their sensitivity to new physics. In this document, we present the physics case and technology challenge of high precision neutrino beams based on the results achieved by the ENUBET Collaboration in 2016-2018. We also set the R&D milestones to enable the construction and running of this new generation of experiments well before the start of the DUNE and Hyper-Kamiokande data taking. We discuss the implementation of this new facility at three different level of complexity: $ν_μ$ narrow band beams, $ν_e$ monitored beams and tagged neutrino beams. We also consider a site specific implementation based on the CERN-SPS proton driver providing a fully controlled neutrino source to the ProtoDUNE detectors at CERN.
△ Less
Submitted 15 January, 2019;
originally announced January 2019.
-
KLEVER: An experiment to measure BR($K_L\toπ^0ν\barν$) at the CERN SPS
Authors:
F. Ambrosino,
R. Ammendola,
A. Antonelli,
K. Ayers,
D. Badoni,
G. Ballerini,
L. Bandiera,
J. Bernhard,
C. Biino,
L. Bomben,
V. Bonaiuto,
A. Bradley,
M. B. Brunetti,
F. Bucci,
A. Cassese,
R. Camattari,
M. Corvino,
D. De Salvador,
D. Di Filippo,
M. van Dijk,
N. Doble,
R. Fantechi,
S. Fedotov,
A. Filippi,
F. Fontana
, et al. (53 additional authors not shown)
Abstract:
Precise measurements of the branching ratios for the flavor-changing neutral current decays $K\toπν\barν$ can provide unique constraints on CKM unitarity and, potentially, evidence for new physics. It is important to measure both decay modes, $K^+\toπ^+ν\barν$ and $K_L\toπ^0ν\barν$, since different new physics models affect the rates for each channel differently. The goal of the NA62 experiment at…
▽ More
Precise measurements of the branching ratios for the flavor-changing neutral current decays $K\toπν\barν$ can provide unique constraints on CKM unitarity and, potentially, evidence for new physics. It is important to measure both decay modes, $K^+\toπ^+ν\barν$ and $K_L\toπ^0ν\barν$, since different new physics models affect the rates for each channel differently. The goal of the NA62 experiment at the CERN SPS is to measure the BR for the charged channel to within 10%. For the neutral channel, the BR has never been measured. We are designing the KLEVER experiment to measure BR($K_L\toπ^0ν\barν$) to $\sim$20% using a high-energy neutral beam at the CERN SPS starting in LHC Run 4. The boost from the high-energy beam facilitates the rejection of background channels such as $K_L\toπ^0π^0$ by detection of the additional photons in the final state. On the other hand, the layout poses particular challenges for the design of the small-angle vetoes, which must reject photons from $K_L$ decays esca** through the beam exit amidst an intense background from soft photons and neutrons in the beam. Background from $Λ\to nπ^0$ decays in the beam must also be kept under control. We present findings from our design studies for the beamline and experiment, with an emphasis on the challenges faced and the potential sensitivity for the measurement of BR($K_L\toπ^0ν\barν$).
△ Less
Submitted 22 May, 2019; v1 submitted 10 January, 2019;
originally announced January 2019.
-
Shashlik calorimeters: novel compact prototypes for the ENUBET experiment
Authors:
M. Pari,
G. Ballerini,
A. Berra,
R. Boanta,
M. Bonesini,
C. Brizzolari,
G. Brunetti,
M. Calviani,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
A. Coffani,
F. Cindolo,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
C. Delogu,
A. Gola,
R. A. Intonti,
C. Jollet,
Y. Kudenko,
M. Laveder,
A. Longhin,
P. F. Loverre
, et al. (28 additional authors not shown)
Abstract:
We summarize in this paper the detector R&D performed in the framework of the ERC ENUBET Project. We discuss in particular the latest results on longitudinally segmented shashlik calorimeters and the first HEP application of polysiloxane-based scintillators.
We summarize in this paper the detector R&D performed in the framework of the ERC ENUBET Project. We discuss in particular the latest results on longitudinally segmented shashlik calorimeters and the first HEP application of polysiloxane-based scintillators.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
A narrow band neutrino beam with high precision flux measurements
Authors:
A. Coffani,
G. Ballerini,
A. Berra,
R. Boanta,
M. Bonesini,
C. Brizzolari,
G. Brunetti,
M. Calviani,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
A. Gola,
R. A. Intonti,
C. Jollet,
Y. Kudenko,
M. Laveder,
A. Longhin,
P. F. Loverre,
L. Ludovici,
L. Magaletti
, et al. (27 additional authors not shown)
Abstract:
The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the s…
▽ More
The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the selection of the energy of the outcoming neutrinos. We report here the latest results in the development and test of the instrumentation for the decay tunnel. Special emphasis is given to irradiation tests of the photo-sensors performed at INFN-LNL and CERN in 2017 and to the first application of polysiloxane-based scintillators in high energy physics.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Strong reduction of the effective radiation length in an axially oriented scintillator crystal
Authors:
L. Bandiera,
V. V. Tikhomirov,
M. Romagnoni,
N. Argiolas,
E. Bagli,
G. Ballerini,
A. Berra,
C. Brizzolari,
R. Camattari,
D. De Salvador,
V. Haurylavets,
V. Mascagna,
A. Mazzolari,
M. Prest,
M. Soldani,
A. Sytov,
E. Vallazza
Abstract:
We measured a considerable increase of the emitted radiation by 120 GeV/c electrons in an axially oriented lead tungstate scintillator crystal, if compared to the case in which the sample was not aligned with the beam direction. This enhancement resulted from the interaction of particles with the strong crystalline electromagnetic field. The data collected at the external lines of CERN SPS were cr…
▽ More
We measured a considerable increase of the emitted radiation by 120 GeV/c electrons in an axially oriented lead tungstate scintillator crystal, if compared to the case in which the sample was not aligned with the beam direction. This enhancement resulted from the interaction of particles with the strong crystalline electromagnetic field. The data collected at the external lines of CERN SPS were critically compared to Monte Carlo simulations based on the Baier Katkov quasiclassical method, highlighting a reduction of the scintillator radiation length by a factor of five in case of beam alignment with the [001] crystal axes. The observed effect opens the way to the realization of compact electromagnetic calorimeters/detectors based on oriented scintillator crystals in which the amount of material can be strongly reduced with respect to the state of the art. These devices could have relevant applications in fixed-target experiments as well as in satellite-borne gamma-telescopes.
△ Less
Submitted 25 July, 2018; v1 submitted 27 March, 2018;
originally announced March 2018.
-
Testbeam performance of a shashlik calorimeter with fine-grained longitudinal segmentation
Authors:
G. Ballerini,
A. Berra,
R. Boanta,
C. Brizzolari,
G. Brunetti,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
A. Coffani,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
A. Gola,
C. Jollet,
A. Longhin,
L. Ludovici,
L. Magaletti,
G. Mandrioli,
A. Margotti,
V. Mascagna,
A. Meregaglia,
M. Pari,
L. Pasqualini,
G. Paternoster
, et al. (12 additional authors not shown)
Abstract:
An iron- plastic-scintillator shashlik calorimeter with a 4.3 $X_0$ longitudinal segmentation was tested in November 2016 at the CERN East Area facility with charged particles up to 5 GeV. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. Such a fine-grained longitudinal…
▽ More
An iron- plastic-scintillator shashlik calorimeter with a 4.3 $X_0$ longitudinal segmentation was tested in November 2016 at the CERN East Area facility with charged particles up to 5 GeV. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. Such a fine-grained longitudinal segmentation is achieved using a very compact light readout system developed by the SCENTT and ENUBET Collaborations, which is based on fiber-SiPM coupling boards embedded in the bulk of the detector. We demonstrate that this system fulfills the requirements for neutrino physics applications and discuss performance and additional improvements.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
