-
Measurement of the Per Cavity Energy Recovery Efficiency in the Single Turn CBETA Configuration
Authors:
C. Gulliford,
N. Banerjee,
A. Bartnik,
J. Crittenden,
K. Deitrick,
G. H. Hoffstaetter,
P. Quigley,
K. Smolenski,
J. S. Berg,
R. Michnoff,
S. Peggs,
D. Trbojevic
Abstract:
Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct measurement of the beam loading in each of the main linac cavities demonstrated high energy recovery efficiency. Specifically, a total one-turn power balance efficienc…
▽ More
Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct measurement of the beam loading in each of the main linac cavities demonstrated high energy recovery efficiency. Specifically, a total one-turn power balance efficiency of 99.4%, with per cavity power balances ranging from 99.2-99.8%, was measured. When accounting for small particle losses occurring in the path length adjustment sections of the return loop, this corresponds to per cavity single particle energy recovery efficiencies ranging from 99.8 to 100.5%. A maximum current of 70 microamps was energy recovered, limited by radiation shielding of the beam stop in its preliminary installation.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Beam Commissioning Results from the CBETA Fractional Arc Test
Authors:
C. Gulliford,
N. Banerjee,
A. Bartnik,
J. S. Berg,
J. Crittenden,
J. Dobbins,
R. Hulsart,
J. Jones,
D. J. Kelliher,
B. Kuske,
W. Lou,
M. McAteer,
R. Michnoff,
S. Peggs,
P. Quigley,
D. Sagan,
K. Smolenski,
V. Vesherevich,
D. Widger,
G. H. Hoffstaetter,
D. Trbojevic
Abstract:
This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell photo-injector, the first full energy operation of the main linac with beam, as well as commissioning of the lowest energy matching beamline (splitter) and a partial section of the Fixed Field Alternating gradient (FFA) r…
▽ More
This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell photo-injector, the first full energy operation of the main linac with beam, as well as commissioning of the lowest energy matching beamline (splitter) and a partial section of the Fixed Field Alternating gradient (FFA) return loop featuring first production Halbach style permanent magnets. Achieving these tasks required characterization of the injection beam, calibration and phasing of the main linac cavities, demonstration of the required 36 MeV energy gain, and measurement of the splitter line horizontal dispersion and R56 at the nominal 42 MeV. In addition, a procedure for determining the BPM offsets, as well as the tune per cell in the FFA section via scanning the linac energy and inducing betatron oscillations around the periodic orbit in the fractional arc was developed and tested. A detailed comparison of these measurements to simulation is discussed.
△ Less
Submitted 11 February, 2019; v1 submitted 8 February, 2019;
originally announced February 2019.
-
CBETA Design Report, Cornell-BNL ERL Test Accelerator
Authors:
G. H. Hoffstaetter,
D. Trbojevic,
C. Mayes,
N. Banerjee,
J. Barley,
I. Bazarov,
A. Bartnik,
J. S. Berg,
S. Brooks,
D. Burke,
J. Crittenden,
L. Cultrera,
J. Dobbins,
D. Douglas,
B. Dunham,
R. Eichhorn,
S. Full,
F. Furuta,
C. Franck,
R. Gallagher,
M. Ge,
C. Gulliford,
B. Heltsley,
D. Jusic,
R. Kaplan
, et al. (29 additional authors not shown)
Abstract:
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Rec…
▽ More
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Recovery Linacs (ERLs), with a new characteristic set of beam parameters. Technology has been prototyped that is essential for any high brightness electron ERL. This includes a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule, and a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. All these are now being used to construct a novel one-cryomodule ERL in Cornell's Wilson Lab. Brookhaven National Laboratory (BNL) has designed a multi-turn ERL for eRHIC, where beam is transported more than 20 times around the 4km long RHIC tunnel. The number of transport lines is minimized by using two arcs with strongly-focusing permanent magnets that can control many beams of different energies. A collaboration between BNL and Cornell has been formed to investigate this multi-turn eRHIC ERL design by building a 4-turn, one-cryomodule ERL at Cornell. It also has a return loop built with strongly focusing permanent magnets and is meant to accelerate 40mA beam to 150MeV. This high-brightness beam will have applications beyond accelerator research, in industry, in nuclear physics, and in X-ray science.
△ Less
Submitted 13 June, 2017;
originally announced June 2017.
-
Demonstration of Low Emittance in the Cornell Energy Recovery Linac Injector Prototype
Authors:
Colwyn Gulliford,
Adam Bartnik,
Ivan Bazarov,
Luca Cultrera,
John Dobbins,
Bruce Dunham,
Francisco Gonzalez,
Siddharth Karkare,
Hyeri Lee,
Heng Li,
Yulin Li,
Xianghong Liu,
Jared Maxson,
Christian Nguyen,
Karl Smolenski,
Zhi Zhao
Abstract:
We present a detailed study of the six-dimensional phase space of the electron beam produced by the Cornell Energy Recovery Linac Photoinjector, a high-brightness, high repetition rate (1.3 GHz) DC photoemission source designed to drive a hard x-ray energy recovery linac (ERL). A complete simulation model of the injector has been constructed, verified by measurement, and optimized. Both the horizo…
▽ More
We present a detailed study of the six-dimensional phase space of the electron beam produced by the Cornell Energy Recovery Linac Photoinjector, a high-brightness, high repetition rate (1.3 GHz) DC photoemission source designed to drive a hard x-ray energy recovery linac (ERL). A complete simulation model of the injector has been constructed, verified by measurement, and optimized. Both the horizontal and vertical 2D transverse phase spaces, as well as the time-resolved (sliced) horizontal phase space, were simulated and directly measured at the end of the injector for 19 pC and 77 pC bunches at roughly 8 MeV. These bunch charges were chosen because they correspond to 25 mA and 100 mA average current if operating at the full 1.3 GHz repetition rate. The resulting 90% normalized transverse emittances for 19 (77) pC/bunch were 0.23 +/- 0.02 (0.51 +/- 0.04) microns in the horizontal plane, and 0.14 +/- 0.01 (0.29 +/- 0.02) microns in the vertical plane, respectively. These emittances were measured with a corresponding bunch length of 2.1 +/- 0.1 (3.0 +/- 0.2) ps, respectively. In each case the rms momentum spread was determined to be on the order of 1e-3. Excellent overall agreement between measurement and simulation has been demonstrated. Using the emittances and bunch length measured at 19 pC/bunch, we estimate the electron beam quality in a 1.3 GHz, 5 GeV hard x-ray ERL to be at least a factor of 20 times better than that of existing storage rings when the rms energy spread of each device is considered. These results represent a milestone for the field of high-brightness, high-current photoinjectors.
△ Less
Submitted 23 July, 2013; v1 submitted 9 April, 2013;
originally announced April 2013.
-
Photocathode Behavior During High Current Running in the Cornell ERL Photoinjector
Authors:
Luca Cultrera,
Jared Maxson,
Ivan Bazarov,
Sergey Belomestnykh,
John Dobbins,
Bruce Dunham,
Siddharth Karkare,
Roger Kaplan,
Vaclav Kostroun,
Yulin Li,
Xianghong Liu,
Florian Löhl,
Karl Smolenski,
Zhi Zhao,
David Rice,
Peter Quigley,
Maury Tigner,
Vadim Veshcherevich,
Kenneth Finkelstein,
Darren Dale,
Benjamin Pichler
Abstract:
The Cornell University Energy Recovery Linac (ERL) photoinjector has recently demonstrated operation at 20 mA for approximately 8 hours, utilizing a multialkali photocathode deposited on a Si substrate. We describe the recipe for photocathode deposition, and will detail the parameters of the run. Post-run analysis of the photocathode indicates the presence of significant damage to the substrate, p…
▽ More
The Cornell University Energy Recovery Linac (ERL) photoinjector has recently demonstrated operation at 20 mA for approximately 8 hours, utilizing a multialkali photocathode deposited on a Si substrate. We describe the recipe for photocathode deposition, and will detail the parameters of the run. Post-run analysis of the photocathode indicates the presence of significant damage to the substrate, perhaps due to ion back-bombardment from the residual beamline gas. While the exact cause of the substrate damage remains unknown, we describe multiple surface characterization techniques (X-ray fluorescence spectroscopy, X-ray diffraction, atomic force and scanning electron microscopy) used to study the interesting morphological and crystallographic features of the photocathode surface after its use for high current beam production. Finally, we present a simple model of crystal damage due to ion back-bombardment, which agrees qualitatively with the distribution of damage on the substrate surface.
△ Less
Submitted 16 October, 2011;
originally announced October 2011.