-
Target Field Design of Surface Permanent Magnets
Authors:
Peter J. Hobson,
Chris Morley,
Alister Davis,
Thomas Smith,
Mark Fromhold
Abstract:
We present a target field approach to analytically design magnetic fields using permanent magnets. We assume that their magnetisation is bound to a two-dimensional surface and is composed of a complete basis of surface modes. By posing the Poisson's equation relating the magnetic scalar potential to the magnetisation using Green's functions, we derive simple integrals which determine the magnetic…
▽ More
We present a target field approach to analytically design magnetic fields using permanent magnets. We assume that their magnetisation is bound to a two-dimensional surface and is composed of a complete basis of surface modes. By posing the Poisson's equation relating the magnetic scalar potential to the magnetisation using Green's functions, we derive simple integrals which determine the magnetic field generated by each mode. This approach is demonstrated by deriving the governing integrals for optimising axial magnetisation on cylindrical and circular-planar surfaces. We approximate the governing integrals numerically and implement them into a regularised least-squares optimisation routine to design permanent magnets that generate uniform axial and transverse target magnetic fields. The resulting uniform axial magnetic field profiles demonstrate more than a tenfold increase in uniformity across equivalent target regions compared to the field generated by an optimally separated axially magnetised pair of rings, as validated using finite element method simulations. We use a simple example to examine how two-dimensional surface magnetisation profiles can be emulated using thin three-dimensional volumes and determine how many discrete intervals are required to accurately approximate a continuously-varying surface pattern. Magnets designed using our approach may enable higher quality bias fields for electric machines, nuclear fusion, fundamental physics, magnetic trap**, and beyond.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Bi-planar magnetic stabilisation coils for an inertial sensor based on atom interferometry
Authors:
A. Davis,
P. J. Hobson,
T. X. Smith,
C. Morley,
H. G. Sewell,
J. Cotter,
T. M. Fromhold
Abstract:
Inertial sensors that measure the acceleration of ultracold atoms promise unrivalled accuracy compared to classical equivalents. However, atomic systems are sensitive to various perturbations, including magnetic fields, which can introduce measurement inaccuracies. To address this challenge, we have designed, manufactured, and validated a magnetic field stabilisation system for a quantum sensor ba…
▽ More
Inertial sensors that measure the acceleration of ultracold atoms promise unrivalled accuracy compared to classical equivalents. However, atomic systems are sensitive to various perturbations, including magnetic fields, which can introduce measurement inaccuracies. To address this challenge, we have designed, manufactured, and validated a magnetic field stabilisation system for a quantum sensor based on atom interferometry. We solve for the magnetic field generated by surface currents in-between a pair of rectangular coils and approximate the surface current using discrete wires. The wires are wound by-hand onto machined panels which are retrofitted onto the existing mounting structure of the sensor without interfering with any experimental components. Along the central $60$ mm of the $y$-axis, which aligns with the trajectory of the atoms during interferometry, the coils are measured to generate an independent uniform axial magnetic field with a strength of $B_z=\left(22.81\pm0.01\right)$ $μ$T/A [$\mathrm{mean}\pm2σ\mathrm{std. error}$] and an independent linear axial field gradient of strength $\mathrm{d}B_z/\mathrm{d}y=\left(10.6\pm0.1\right)$ $μ$T/Am. The uniform $B_z$ field is measured to deviate by a maximum value of $1.3$% in the same region, which is a factor of three times more uniform than the previously-used on-sensor rectangular $B_z$ compensation set.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Silicon Implantation and Annealing in $β$-Ga$_2$O$_3$: Role of Ambient, Temperature, and Time
Authors:
K. R. Gann,
N. Pieczulewski1,
C. A. Gorsak,
K. Heinselman,
T. J. Asel,
B. A. Noesges,
K. T. Smith,
D. M. Dryden,
H. G. Xing,
H. P. Nair,
D. A. Muller,
M. O. Thompson
Abstract:
Optimizing thermal anneals of Si-implanted $β$-Ga$_2$O$_3$ is critical for low resistance contacts and selective area do**. We report the impact of annealing ambient, temperature, and time on activation of room temperature ion-implanted Si in $β$-Ga$_2$O$_3$ at concentrations from 5x10$^{18}$ to 1x10$^{20}$ cm$^{-3}$, demonstrating full activation (>80% activation, mobilities >70 cm$^{2}$/Vs) wi…
▽ More
Optimizing thermal anneals of Si-implanted $β$-Ga$_2$O$_3$ is critical for low resistance contacts and selective area do**. We report the impact of annealing ambient, temperature, and time on activation of room temperature ion-implanted Si in $β$-Ga$_2$O$_3$ at concentrations from 5x10$^{18}$ to 1x10$^{20}$ cm$^{-3}$, demonstrating full activation (>80% activation, mobilities >70 cm$^{2}$/Vs) with contact resistances below 0.29 $Ω$-mm. Homoepitaxial $β$-Ga$_2$O$_3$ films, grown by plasma assisted MBE on Fe-doped (010) substrates, were implanted at multiple energies to yield 100 nm box profiles of 5x10$^{18}$, 5x10$^{19}$, and 1x10$^{20}$ cm$^{-3}$. Anneals were performed in a UHV-compatible quartz furnace at 1 bar with well-controlled gas composition. To maintain $β$-Ga$_2$O$_3$ stability, $p_{O2}$ must be greater than 10$^{-9}$ bar. Anneals up to $p_{O2}$ = 1 bar achieve full activation at 5x10$^{18}$ cm$^{-3}$, while 5x10$^{19}$ cm$^{-3}$ must be annealed with $p_{O2}$ <10$^{-4}$ bar and 1x10$^{20}$ cm$^{-3}$ requires $p_{O2}$ <10$^{-6}$ bar. Water vapor prevents activation and must be maintained below 10$^{-8}$ bar. Activation is achieved for anneal temperatures as low as 850 °C with mobility increasing with anneal temperature up to 1050 °C, though Si diffusion has been reported above 950 °C. At 950 °C, activation is maximized between 5 and 20 minutes with longer times resulting in decreased carrier activation (over-annealing). This over-annealing is significant for concentrations above 5x10$^{19}$ cm$^{-3}$ and occurs rapidly at 1x10$^{20}$ cm$^{-3}$. RBS (channeling) suggests damage recovery is seeded from remnant aligned $β$-Ga$_2$O$_3$ that remains after implantation; this conclusion is also supported by STEM showing retention of the $β$-phase with inclusions that resemble the $γ$-phase.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Spatial correlation increase in single-sensor satellite data reveals loss of Amazon rainforest resilience
Authors:
Lana L. Blaschke,
Da Nian,
Bathiany,
Maya Ben-Yami,
Taylor Smith,
Chris A. Boulton,
Niklas Boers
Abstract:
The Amazon rainforest (ARF) is threatened by deforestation and climate change, which could trigger a regime shift to a savanna-like state. Previous work suggesting declining resilience in recent decades was based only on local resilience indicators. Moreover, previous results are potentially biased by the employed multi-sensor and optical satellite data and undetected anthropogenic land-use change…
▽ More
The Amazon rainforest (ARF) is threatened by deforestation and climate change, which could trigger a regime shift to a savanna-like state. Previous work suggesting declining resilience in recent decades was based only on local resilience indicators. Moreover, previous results are potentially biased by the employed multi-sensor and optical satellite data and undetected anthropogenic land-use change. Here, we show that the spatial correlation provides a more robust resilience indicator than local estimators and employ it to measure resilience changes in the ARF, based on single-sensor Vegetation Optical Depth data under conservative exclusion of human activity. Our results show an overall loss of resilience until around 2019, which is especially pronounced in the southwestern and northern Amazon for the time period from 2002 to 2011. The demonstrated reliability of spatial correlation in coupled systems suggests that in particular the southwest of the ARF has experienced pronounced resilience loss over the last two decades.
△ Less
Submitted 27 October, 2023;
originally announced October 2023.
-
Phosphorus-Controlled Nanoepitaxy in the Asymmetric Growth of GaAs-InP Core-Shell Bent Nanowires
Authors:
Spencer McDermott,
Trevor R. Smith,
Ray R. LaPierre,
Ryan B. Lewis
Abstract:
Breakthroughs extending nanostructure engineering beyond what is possible with current fabrication techniques will be crucial for enabling next-generation nanotechnologies. Nanoepitaxy of strain-engineered bent nanowire heterostructures presents a promising platform for realizing bottom-up and scalable fabrication of nanowire devices. The synthesis of these structures requires the selective asymme…
▽ More
Breakthroughs extending nanostructure engineering beyond what is possible with current fabrication techniques will be crucial for enabling next-generation nanotechnologies. Nanoepitaxy of strain-engineered bent nanowire heterostructures presents a promising platform for realizing bottom-up and scalable fabrication of nanowire devices. The synthesis of these structures requires the selective asymmetric deposition of lattice-mismatched shells-a complex growth process which is not well understood. We present the nanoepitaxial growth of GaAs-InP core-shell bent nanowires and connecting nanowire pairs to form nano-arches. Compositional analysis of nanowire cross-sections reveals the critical role of adatom diffusion in the nanoepitaxial growth process, which leads to two distinct growth regimes: indium-diffusion limited growth and phosphorous-limited growth. The highly controllable phosphorous-limited growth mode is employed to synthesize connected nanowire pairs and quantify the role of flux shadowing on the shell growth process. These results provide important insight into three-dimensional nanoepitaxy and enable new possibilities for nanowire device fabrication.
△ Less
Submitted 14 May, 2023; v1 submitted 12 May, 2023;
originally announced May 2023.
-
Designing optimal loop, saddle, and ellipse-based magnetic coils by spherical harmonic map**
Authors:
Peter James Hobson,
Noah Louis Hardwicke,
Alister Davis,
Thomas Smith,
Chris Morley,
Michael Packer,
Niall Holmes,
Max Alain Weil,
Matthew Brookes,
Richard Bowtell,
Mark Fromhold
Abstract:
Adaptable, low-cost, coils designed by carefully selecting the arrangements and geometries of simple primitive units are used to generate magnetic fields for diverse applications. These extend from magnetic resonance and fundamental physics experiments to active shielding of quantum devices including magnetometers, interferometers, clocks, and computers. However, finding optimal arrangements and g…
▽ More
Adaptable, low-cost, coils designed by carefully selecting the arrangements and geometries of simple primitive units are used to generate magnetic fields for diverse applications. These extend from magnetic resonance and fundamental physics experiments to active shielding of quantum devices including magnetometers, interferometers, clocks, and computers. However, finding optimal arrangements and geometries of multiple primitive structures is time-intensive and it is challenging to account for additional constraints, e.g. optical access, during the design process. Here, we demonstrate a general method to find these optimal arrangements. We encode specific symmetries into sets of loops, saddles, and cylindrical ellipses and then solve exactly for the magnetic field harmonics generated by each set. By combining these analytic solutions using computer algebra, we can use numerical techniques to efficiently map the landscape of parameters and geometries which the coils must satisfy. Sets of solutions may be found which generate desired target fields accurately while accounting for complexity and size restrictions. We demonstrate this approach by employing simple configurations of loops, saddles, and cylindrical ellipses to design target linear field gradients and compare their performance with designs obtained using conventional methods. A case study is presented where three optimized arrangements of loops, designed to generate a uniform axial field, a linear axial field gradient, and a quadratic axial field gradient, respectively, are hand-wound around a low-cost, 3D-printed coil former. These coils are used to null the background in a typical laboratory environment, reducing the magnitude of the axial field along the central half of the former's axis from $\left(7.8\pm0.3\right)$ $μ$T (mean $\pm$ st. dev.) to $\left(0.11\pm0.04\right)$ $μ$T.
△ Less
Submitted 14 July, 2023; v1 submitted 30 April, 2023;
originally announced May 2023.
-
Temporal Subsampling Diminishes Small Spatial Scales in Recurrent Neural Network Emulators of Geophysical Turbulence
Authors:
Timothy A. Smith,
Stephen G. Penny,
Jason A. Platt,
Tse-Chun Chen
Abstract:
The immense computational cost of traditional numerical weather and climate models has sparked the development of machine learning (ML) based emulators. Because ML methods benefit from long records of training data, it is common to use datasets that are temporally subsampled relative to the time steps required for the numerical integration of differential equations. Here, we investigate how this o…
▽ More
The immense computational cost of traditional numerical weather and climate models has sparked the development of machine learning (ML) based emulators. Because ML methods benefit from long records of training data, it is common to use datasets that are temporally subsampled relative to the time steps required for the numerical integration of differential equations. Here, we investigate how this often overlooked processing step affects the quality of an emulator's predictions. We implement two ML architectures from a class of methods called reservoir computing: (1) a form of Nonlinear Vector Autoregression (NVAR), and (2) an Echo State Network (ESN). Despite their simplicity, it is well documented that these architectures excel at predicting low dimensional chaotic dynamics. We are therefore motivated to test these architectures in an idealized setting of predicting high dimensional geophysical turbulence as represented by Surface Quasi-Geostrophic dynamics. In all cases, subsampling the training data consistently leads to an increased bias at small spatial scales that resembles numerical diffusion. Interestingly, the NVAR architecture becomes unstable when the temporal resolution is increased, indicating that the polynomial based interactions are insufficient at capturing the detailed nonlinearities of the turbulent flow. The ESN architecture is found to be more robust, suggesting a benefit to the more expensive but more general structure. Spectral errors are reduced by including a penalty on the kinetic energy density spectrum during training, although the subsampling related errors persist. Future work is warranted to understand how the temporal resolution of training data affects other ML architectures.
△ Less
Submitted 21 September, 2023; v1 submitted 28 April, 2023;
originally announced May 2023.
-
Constraining Chaos: Enforcing dynamical invariants in the training of recurrent neural networks
Authors:
Jason A. Platt,
Stephen G. Penny,
Timothy A. Smith,
Tse-Chun Chen,
Henry D. I. Abarbanel
Abstract:
Drawing on ergodic theory, we introduce a novel training method for machine learning based forecasting methods for chaotic dynamical systems. The training enforces dynamical invariants--such as the Lyapunov exponent spectrum and fractal dimension--in the systems of interest, enabling longer and more stable forecasts when operating with limited data. The technique is demonstrated in detail using th…
▽ More
Drawing on ergodic theory, we introduce a novel training method for machine learning based forecasting methods for chaotic dynamical systems. The training enforces dynamical invariants--such as the Lyapunov exponent spectrum and fractal dimension--in the systems of interest, enabling longer and more stable forecasts when operating with limited data. The technique is demonstrated in detail using the recurrent neural network architecture of reservoir computing. Results are given for the Lorenz 1996 chaotic dynamical system and a spectral quasi-geostrophic model, both typical test cases for numerical weather prediction.
△ Less
Submitted 23 April, 2023;
originally announced April 2023.
-
arXiv:2304.06869
[pdf]
cond-mat.mtrl-sci
cond-mat.other
physics.app-ph
physics.chem-ph
physics.comp-ph
Energy-composition relations in Ni$_3$(Al$_{1-x}$X$_x$) phases
Authors:
Nikolai A. Zarkevich,
Timothy M. Smith,
John W. Lawson
Abstract:
The secondary phase, such as Ni$_3$Al-based $L1_2$ $γ^\prime$, is crucially important for precipitation strengthening of superalloys. Composition-structure-property relations provide useful insights for guided alloy design. Here we use density functional theory combined with the multiple scattering theory to compute dependencies of the structural energies and equilibrium volumes versus composition…
▽ More
The secondary phase, such as Ni$_3$Al-based $L1_2$ $γ^\prime$, is crucially important for precipitation strengthening of superalloys. Composition-structure-property relations provide useful insights for guided alloy design. Here we use density functional theory combined with the multiple scattering theory to compute dependencies of the structural energies and equilibrium volumes versus composition for ternary Ni$_3$(Al$_{1-x}$X$_x$) alloys with X=(Ti, Zr, Hf; V, Nb, Ta; Cr, Mo, W) in $L1_2$, $D0_{24}$, and $D0_{19}$ phases with a homogeneous chemical disorder on the (Al$_{1-x}$X$_x$) sublattice. Our results provide a better understanding of the physics in Ni$_3$Al-based precipitates and facilitate design of next-generation nickel superalloys with precipitation strengthening.
△ Less
Submitted 2 June, 2023; v1 submitted 13 April, 2023;
originally announced April 2023.
-
Energy landscape in NiCoCr-based middle-entropy alloys
Authors:
Nikolai A. Zarkevich,
Timothy M. Smith,
John W. Lawson
Abstract:
NiCoCr middle-entropy alloy is known for its exceptional strength at both low and elevated operating temperatures. Mechanical properties of NiCoCr-based alloys are affected by certain features of the energy landscape, such as the energy difference between the hcp and fcc phases (which is known to correlate with the stacking fault energy in the fcc phase) and curvature of the energy surface. We com…
▽ More
NiCoCr middle-entropy alloy is known for its exceptional strength at both low and elevated operating temperatures. Mechanical properties of NiCoCr-based alloys are affected by certain features of the energy landscape, such as the energy difference between the hcp and fcc phases (which is known to correlate with the stacking fault energy in the fcc phase) and curvature of the energy surface. We compute formation energies in the Ni-Co-Cr ternary and related quaternary systems and investigate dependences of the relative energies on composition. Such computed composition-structure-property relations can be useful for tuning composition and designing next-generation alloys with improved strength.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Roadmap on Deep Learning for Microscopy
Authors:
Giovanni Volpe,
Carolina Wählby,
Lei Tian,
Michael Hecht,
Artur Yakimovich,
Kristina Monakhova,
Laura Waller,
Ivo F. Sbalzarini,
Christopher A. Metzler,
Mingyang Xie,
Kevin Zhang,
Isaac C. D. Lenton,
Halina Rubinsztein-Dunlop,
Daniel Brunner,
Bijie Bai,
Aydogan Ozcan,
Daniel Midtvedt,
Hao Wang,
Nataša Sladoje,
Joakim Lindblad,
Jason T. Smith,
Marien Ochoa,
Margarida Barroso,
Xavier Intes,
Tong Qiu
, et al. (50 additional authors not shown)
Abstract:
Through digital imaging, microscopy has evolved from primarily being a means for visual observation of life at the micro- and nano-scale, to a quantitative tool with ever-increasing resolution and throughput. Artificial intelligence, deep neural networks, and machine learning are all niche terms describing computational methods that have gained a pivotal role in microscopy-based research over the…
▽ More
Through digital imaging, microscopy has evolved from primarily being a means for visual observation of life at the micro- and nano-scale, to a quantitative tool with ever-increasing resolution and throughput. Artificial intelligence, deep neural networks, and machine learning are all niche terms describing computational methods that have gained a pivotal role in microscopy-based research over the past decade. This Roadmap is written collectively by prominent researchers and encompasses selected aspects of how machine learning is applied to microscopy image data, with the aim of gaining scientific knowledge by improved image quality, automated detection, segmentation, classification and tracking of objects, and efficient merging of information from multiple imaging modalities. We aim to give the reader an overview of the key developments and an understanding of possibilities and limitations of machine learning for microscopy. It will be of interest to a wide cross-disciplinary audience in the physical sciences and life sciences.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Exploring Fundamental Particle Acceleration and Loss Processes in Heliophysics through an Orbiting X-ray Instrument in the Jovian System
Authors:
W. Dunn,
G. Berland,
E. Roussos,
G. Clark,
P. Kollmann,
D. Turner,
C. Feldman,
T. Stallard,
G. Branduardi-Raymont,
E. E. Woodfield,
I. J. Rae,
L. C. Ray,
J. A. Carter,
S. T. Lindsay,
Z. Yao,
R. Marshall,
A. N. Jaynes A.,
Y. Ezoe,
M. Numazawa,
G. B. Hospodarsky,
X. Wu,
D. M. Weigt,
C. M. Jackman,
K. Mori,
Q. Nénon
, et al. (19 additional authors not shown)
Abstract:
Jupiter's magnetosphere is considered to be the most powerful particle accelerator in the Solar System, accelerating electrons from eV to 70 MeV and ions to GeV energies. How electromagnetic processes drive energy and particle flows, producing and removing energetic particles, is at the heart of Heliophysics. Particularly, the 2013 Decadal Strategy for Solar and Space Physics was to "Discover and…
▽ More
Jupiter's magnetosphere is considered to be the most powerful particle accelerator in the Solar System, accelerating electrons from eV to 70 MeV and ions to GeV energies. How electromagnetic processes drive energy and particle flows, producing and removing energetic particles, is at the heart of Heliophysics. Particularly, the 2013 Decadal Strategy for Solar and Space Physics was to "Discover and characterize fundamental processes that occur both within the heliosphere and throughout the universe". The Jovian system offers an ideal natural laboratory to investigate all of the universal processes highlighted in the previous Decadal. The X-ray waveband has been widely used to remotely study plasma across astrophysical systems. The majority of astrophysical emissions can be grouped into 5 X-ray processes: fluorescence, thermal/coronal, scattering, charge exchange and particle acceleration. The Jovian system offers perhaps the only system that presents a rich catalog of all of these X-ray emission processes and can also be visited in-situ, affording the special possibility to directly link fundamental plasma processes with their resulting X-ray signatures. This offers invaluable ground-truths for astrophysical objects beyond the reach of in-situ exploration (e.g. brown dwarfs, magnetars or galaxy clusters that map the cosmos). Here, we show how coupling in-situ measurements with in-orbit X-ray observations of Jupiter's radiation belts, Galilean satellites, Io Torus, and atmosphere addresses fundamental heliophysics questions with wide-reaching impact across helio- and astrophysics. New developments like miniaturized X-ray optics and radiation-tolerant detectors, provide compact, lightweight, wide-field X-ray instruments perfectly suited to the Jupiter system, enabling this exciting new possibility.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Precision Measurement of the Specific Activity of $^{39}$Ar in Atmospheric Argon with the DEAP-3600 Detector
Authors:
P. Adhikari,
R. Ajaj,
M. Alpízar-Venegas,
P. -A. Amaudruz,
J. Anstey,
G. R. Araujo,
D. J. Auty,
M. Baldwin,
M. Batygov,
B. Beltran,
H. Benmansour,
C. E. Bina,
J. Bonatt,
W. Bonivento,
M. G. Boulay,
B. Broerman,
J. F. Bueno,
P. M. Burghardt,
A. Butcher,
M. Cadeddu,
B. Cai,
M. Cárdenas-Montes,
S. Cavuoti,
M. Chen,
Y. Chen
, et al. (125 additional authors not shown)
Abstract:
The specific activity of the beta decay of $^{39}$Ar in atmospheric argon is measured using the DEAP-3600 detector. DEAP-3600, located 2 km underground at SNOLAB, uses a total of (3269 $\pm$ 24) kg of liquid argon distilled from the atmosphere to search for dark matter. This detector with very low background uses pulseshape discrimination to differentiate between nuclear recoils and electron recoi…
▽ More
The specific activity of the beta decay of $^{39}$Ar in atmospheric argon is measured using the DEAP-3600 detector. DEAP-3600, located 2 km underground at SNOLAB, uses a total of (3269 $\pm$ 24) kg of liquid argon distilled from the atmosphere to search for dark matter. This detector with very low background uses pulseshape discrimination to differentiate between nuclear recoils and electron recoils and is well-suited to measure the decay of $^{39}$Ar. With 167 live-days of data, the measured specific activity at the time of atmospheric extraction is [0.964 $\pm$ 0.001 (stat) $\pm$ 0.024 (sys)] Bq/kg$_{\rm atmAr}$ which is consistent with results from other experiments. A cross-check analysis using different event selection criteria provides a consistent result.
△ Less
Submitted 10 October, 2023; v1 submitted 27 February, 2023;
originally announced February 2023.
-
Benchtop magnetic shielding for benchmarking atomic magnetometers
Authors:
P. J. Hobson,
N. Holmes,
P. Patel,
J. Chalmers,
B. Styles,
C. Morley,
A. Davis,
M. Packer,
T. X. Smith,
S. Raudonyte,
D. Holmes,
R. Harrison,
D. Woolger,
D. Sims,
M. J. Brookes,
R. W. Bowtell,
T. M. Fromhold
Abstract:
Here, a benchtop hybrid magnetic shield containing four mumetal cylinders and nine internal flexible printed circuit boards is designed, constructed, tested, and operated. The shield is designed specifically as a test-bed for building and operating ultra-sensitive quantum magnetometers. The geometry and spacing of the mumetal cylinders are optimized to maximize shielding efficiency while maintaini…
▽ More
Here, a benchtop hybrid magnetic shield containing four mumetal cylinders and nine internal flexible printed circuit boards is designed, constructed, tested, and operated. The shield is designed specifically as a test-bed for building and operating ultra-sensitive quantum magnetometers. The geometry and spacing of the mumetal cylinders are optimized to maximize shielding efficiency while maintaining Johnson noise $<15$ fT/$\sqrt{}$Hz. Experimental measurements at the shield's center show passive shielding efficiency of $\left(1.0\pm0.1\right){\times}10^6$ for a $0.2$ Hz oscillating field applied along the shield's axis. The nine flexible printed circuit boards generate three uniform fields, which all deviate from perfect uniformity by ${\leq}0.5$% along $50$% of the inner shield axis, and five linear field gradients and one second-order gradient, which all deviate by ${\leq}4$% from perfect linearity and curvature, respectively, over measured target regions. Together, the target field amplitudes are adjusted to minimize the remnant static field along $40$% of the inner shield axis, as mapped using an atomic magnetometer. In this region, the active null reduces the norm of the magnitudes of the three uniform fields and six gradients by factors of $19.5$ and $19.8$, respectively, thereby reducing the total static field from $1.68$ nT to $0.23$ nT.
△ Less
Submitted 24 March, 2023; v1 submitted 27 October, 2022;
originally announced October 2022.
-
Conceptual design of an innovative UVC-LED air-cleaner to reduce airborne pathogen transmission
Authors:
Saket Kapse,
Dena Rahman,
Eldad J Avital,
Taylor Smith,
Lidia Cantero-Garcia,
Maham Sandhu,
Rishav Raj,
Fariborz Motallebi,
Abdus Samad,
Nithya Venkatesan,
Clive B Beggs
Abstract:
A conceptual design of a novel UVC-LED air-cleaner is presented as part of an international educational-research study. The main components are a dust-filter assembly, a UVC chamber and a fan. The dust-filter aims to suppress dust accumulation that will hamper the UVC chamber operation. The innovation is in the UVC chamber that includes a novel turbulence-generating grid to enhance air mixing in t…
▽ More
A conceptual design of a novel UVC-LED air-cleaner is presented as part of an international educational-research study. The main components are a dust-filter assembly, a UVC chamber and a fan. The dust-filter aims to suppress dust accumulation that will hamper the UVC chamber operation. The innovation is in the UVC chamber that includes a novel turbulence-generating grid to enhance air mixing in the chamber and a novel LEDs layout to achieve sufficient kill of the SARS-CoV-2 virus and TB bacterium aerosols with a reasonable power consumption. Both diseases have hit hard low to medium income countries and this study is part of an effort to offer non-pharmaceutical solutions to mitigate the air-transmission of such diseases. Low to high fidelity methods of computational fluid dynamics and UVC ray method are used to show that the design can provide a kill above 97% for Covid and TB, and above 92% for influenza-A. This is at a flow rate of 100 l/s, power consumption of less than 300W and a device size that is both portable and may also fit into ventilation ducts. Research and educational methodologies are discussed, along with analysis of the inexpensive dust-filter performance and the irradiation and flow fields.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
Full Configuration Interaction Excited-State Energies in Large Active Spaces from Subspace Iteration with Repeated Random Sparsification
Authors:
Samuel M. Greene,
Robert J. Webber,
James E. T. Smith,
Jonathan Weare,
Timothy C. Berkelbach
Abstract:
We present a stable and systematically improvable quantum Monte Carlo (QMC) approach to calculating excited-state energies, which we implement using our fast randomized iteration method for the full configuration interaction problem (FCI-FRI). Unlike previous excited-state quantum Monte Carlo methods, our approach, which is an asymmetric variant of subspace iteration, avoids the use of dot product…
▽ More
We present a stable and systematically improvable quantum Monte Carlo (QMC) approach to calculating excited-state energies, which we implement using our fast randomized iteration method for the full configuration interaction problem (FCI-FRI). Unlike previous excited-state quantum Monte Carlo methods, our approach, which is an asymmetric variant of subspace iteration, avoids the use of dot products of random vectors and instead relies upon trial vectors to maintain orthogonality and estimate eigenvalues. By leveraging recent advances, we apply our method to calculate ground- and excited-state energies of strongly correlated molecular systems in large active spaces, including the carbon dimer with 8 electrons in 108 orbitals (8e,108o), an oxo-Mn(salen) transition metal complex (28e,28o), ozone (18e,87o), and butadiene (22e,82o). In the majority of these test cases, our approach yields total excited-state energies that agree with those from state-of-the-art methods -- including heat-bath CI, the density matrix renormalization group approach, and FCIQMC -- to within sub-milliHartree accuracy. In all cases, estimated excitation energies agree to within about 0.1 eV.
△ Less
Submitted 12 October, 2022; v1 submitted 28 January, 2022;
originally announced January 2022.
-
Intensity Modulated Photocurrent Microspectrosopy for Next Generation Photovoltaics
Authors:
Jamie Laird,
Sandheep Ravishankar,
Askhkat Jumabekov,
Kevin Rietwyk,
Wenxin Mao,
Udo Bach,
Trevor Smith
Abstract:
In this report, we describe a large-area Laser Beam Induced Current (LBIC) microscope that has been adapted to perform Intensity Modulated Photocurrent Spectroscopy in an imaging mode combined with automated J-V electrical characterization. Henceforth we refer to the method as either Intensity Modulated Photocurrent Micro-spectroscopy or simply IMPS microscopy. Microscopy based IMPS aims to use th…
▽ More
In this report, we describe a large-area Laser Beam Induced Current (LBIC) microscope that has been adapted to perform Intensity Modulated Photocurrent Spectroscopy in an imaging mode combined with automated J-V electrical characterization. Henceforth we refer to the method as either Intensity Modulated Photocurrent Micro-spectroscopy or simply IMPS microscopy. Microscopy based IMPS aims to use the localised frequency response to correlate the optoelectrical response with a particular interface, bulk material, specific transport layer or transport parameter. The system developed here is specifically designed to track the decomposition of organic solar cells including hybrid-inorganic PSCs during long-term exposure to quantities such as light, oxygen, moisture, and heat
△ Less
Submitted 22 April, 2022; v1 submitted 25 January, 2022;
originally announced January 2022.
-
Near-Exact Nuclear Gradients of Complete Active Space Self-Consistent Field Wave Functions
Authors:
James E. T. Smith,
Joonho Lee,
Sandeep Sharma
Abstract:
In this paper, we study the nuclear gradients of heat bath configuration interaction self-consistent field (HCISCF) wave functions and use them to optimize molecular geometries for various molecules. We show that the HCISCF nuclear gradients are fairly insensitive to the size of the "selected" variational space, which allows us to reduce the computational cost without introducing significant error…
▽ More
In this paper, we study the nuclear gradients of heat bath configuration interaction self-consistent field (HCISCF) wave functions and use them to optimize molecular geometries for various molecules. We show that the HCISCF nuclear gradients are fairly insensitive to the size of the "selected" variational space, which allows us to reduce the computational cost without introducing significant error. The ability of HCISCF to treat larger active spaces combined with the flexibility for users to control the computational cost makes the method very attractive for studying strongly correlated systems which require a larger active space than possible with complete active space self-consistent field (CASSCF). Finally, we study the realistic catalyst, Fe(PDI), and highlight some of the challenges this system poses for density functional theory (DFT). We demonstrate how HCISCF can clarify the energetic stability of geometries obtained from DFT when the results are strongly dependent on the functional. We also use the HCISCF gradients to optimize geometries for this species and study the adiabatic singlet-triplet gap. During geometry optimization, we find that multiple near-degenerate local minima exist on the triplet potential energy surface.
△ Less
Submitted 16 June, 2022; v1 submitted 17 January, 2022;
originally announced January 2022.
-
Integrating Recurrent Neural Networks with Data Assimilation for Scalable Data-Driven State Estimation
Authors:
Stephen G. Penny,
Timothy A. Smith,
Tse-Chun Chen,
Jason A. Platt,
Hsin-Yi Lin,
Michael Goodliff,
Henry D. I. Abarbanel
Abstract:
Data assimilation (DA) is integrated with machine learning in order to perform entirely data-driven online state estimation. To achieve this, recurrent neural networks (RNNs) are implemented as surrogate models to replace key components of the DA cycle in numerical weather prediction (NWP), including the conventional numerical forecast model, the forecast error covariance matrix, and the tangent l…
▽ More
Data assimilation (DA) is integrated with machine learning in order to perform entirely data-driven online state estimation. To achieve this, recurrent neural networks (RNNs) are implemented as surrogate models to replace key components of the DA cycle in numerical weather prediction (NWP), including the conventional numerical forecast model, the forecast error covariance matrix, and the tangent linear and adjoint models. It is shown how these RNNs can be initialized using DA methods to directly update the hidden/reservoir state with observations of the target system. The results indicate that these techniques can be applied to estimate the state of a system for the repeated initialization of short-term forecasts, even in the absence of a traditional numerical forecast model. Further, it is demonstrated how these integrated RNN-DA methods can scale to higher dimensions by applying domain localization and parallelization, providing a path for practical applications in NWP.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
The Forward Physics Facility: Sites, Experiments, and Physics Potential
Authors:
Luis A. Anchordoqui,
Akitaka Ariga,
Tomoko Ariga,
Weidong Bai,
Kincso Balazs,
Brian Batell,
Jamie Boyd,
Joseph Bramante,
Mario Campanelli,
Adrian Carmona,
Francesco G. Celiberto,
Grigorios Chachamis,
Matthew Citron,
Giovanni De Lellis,
Albert De Roeck,
Hans Dembinski,
Peter B. Denton,
Antonia Di Crecsenzo,
Milind V. Diwan,
Liam Dougherty,
Herbi K. Dreiner,
Yong Du,
Rikard Enberg,
Yasaman Farzan,
Jonathan L. Feng
, et al. (56 additional authors not shown)
Abstract:
The Forward Physics Facility (FPF) is a proposal to create a cavern with the space and infrastructure to support a suite of far-forward experiments at the Large Hadron Collider during the High Luminosity era. Located along the beam collision axis and shielded from the interaction point by at least 100 m of concrete and rock, the FPF will house experiments that will detect particles outside the acc…
▽ More
The Forward Physics Facility (FPF) is a proposal to create a cavern with the space and infrastructure to support a suite of far-forward experiments at the Large Hadron Collider during the High Luminosity era. Located along the beam collision axis and shielded from the interaction point by at least 100 m of concrete and rock, the FPF will house experiments that will detect particles outside the acceptance of the existing large LHC experiments and will observe rare and exotic processes in an extremely low-background environment. In this work, we summarize the current status of plans for the FPF, including recent progress in civil engineering in identifying promising sites for the FPF and the experiments currently envisioned to realize the FPF's physics potential. We then review the many Standard Model and new physics topics that will be advanced by the FPF, including searches for long-lived particles, probes of dark matter and dark sectors, high-statistics studies of TeV neutrinos of all three flavors, aspects of perturbative and non-perturbative QCD, and high-energy astroparticle physics.
△ Less
Submitted 25 May, 2022; v1 submitted 22 September, 2021;
originally announced September 2021.
-
Non-Hermitian engineering of terahertz light using exceptional points in electrically tuneable collective light-matter interactions
Authors:
M. Said Ergoktas,
Sina Soleymani,
Nurbek Kakenov,
Thomas B. Smith,
Gokhan Bakan,
Kaiyuan Wang,
Sinan Balci,
Alessandro Principi,
Kostya S. Novoselov,
Sahin K. Ozdemir,
Coskun Kocabas
Abstract:
The topological structure associated with the branchpoint singularity around an exceptional point (EP) provides new tools for controlling the propagation of electromagnetic waves and their interaction with matter. To date, observation of EPs in light-matter interactions has remained elusive and has hampered further progress in applications of EP physics. Here, we demonstrate the emergence of EPs i…
▽ More
The topological structure associated with the branchpoint singularity around an exceptional point (EP) provides new tools for controlling the propagation of electromagnetic waves and their interaction with matter. To date, observation of EPs in light-matter interactions has remained elusive and has hampered further progress in applications of EP physics. Here, we demonstrate the emergence of EPs in the electrically controlled interaction of light with a collection of organic molecules in the terahertz regime at room temperature. We show, using time-domain terahertz spectroscopy, that the intensity and phase of terahertz pulses can be controlled by a gate voltage which drives the device across the EP. This fully electrically-tuneable system allows reconstructing the Riemann surface associated with the complex energy landscape and provides a topological control of light by tuning the loss-imbalance and frequency detuning of interacting modes. We anticipate that our work could pave the way for new means of dynamic control on the intensity and phase of terahertz field, develo** topological optoelectronics, and studying the manifestations of EP physics in the quantum correlations of the light emitted by a collection of emitters coupled to resonators.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
Online test administration results in students selecting more responses to multiple-choice-multiple-response items
Authors:
Alexis Olsho,
Trevor Smith,
Suzanne White Brahmia,
Philip Eaton,
Charlotte Zimmerman,
Andrew Boudreaux
Abstract:
Multiple-choice multiple-response (MCMR) items (i.e., multiple-choice questions for which more than one response may be selected) can be a valuable tool for assessment. Like traditional multiple-choice single-response questions, they are easy to score, but MCMR items can provide more information about student thinking by probing multiple reasoning facets in a single problem context. In this paper,…
▽ More
Multiple-choice multiple-response (MCMR) items (i.e., multiple-choice questions for which more than one response may be selected) can be a valuable tool for assessment. Like traditional multiple-choice single-response questions, they are easy to score, but MCMR items can provide more information about student thinking by probing multiple reasoning facets in a single problem context. In this paper, we discuss differences in performance on MCMR items that result from differences in administration method (paper vs. online). In particular, we find a tendency for ``clickiness'' in online administration: students choose more responses to MCMR items when taking the electronic version of the assessment. Based on these findings, we recommend that online administration be compared only to other online administrations and not to paper administrations when comparing student results on MCMR items. These results also suggest that MCMR items provide a unique opportunity to probe differences in online and on-paper administration of low-stakes assessments.
△ Less
Submitted 19 August, 2022; v1 submitted 3 June, 2021;
originally announced June 2021.
-
Deep learning in biomedical optics
Authors:
Lei Tian,
Brady Hunt,
Muyinatu A. Lediju Bell,
Ji Yi,
Jason T. Smith,
Marien Ochoa,
Xavier Intes,
Nicholas J. Durr
Abstract:
This article reviews deep learning applications in biomedical optics with a particular emphasis on image formation. The review is organized by imaging domains within biomedical optics and includes microscopy, fluorescence lifetime imaging, in vivo microscopy, widefield endoscopy, optical coherence tomography, photoacoustic imaging, diffuse tomography, and functional optical brain imaging. For each…
▽ More
This article reviews deep learning applications in biomedical optics with a particular emphasis on image formation. The review is organized by imaging domains within biomedical optics and includes microscopy, fluorescence lifetime imaging, in vivo microscopy, widefield endoscopy, optical coherence tomography, photoacoustic imaging, diffuse tomography, and functional optical brain imaging. For each of these domains, we summarize how deep learning has been applied and highlight methods by which deep learning can enable new capabilities for optics in medicine. Challenges and opportunities to improve translation and adoption of deep learning in biomedical optics are also summarized.
△ Less
Submitted 23 May, 2021;
originally announced May 2021.
-
Replicating analyses of item response curves using data from the Force and Motion Conceptual Evaluation
Authors:
Connor J. Richardson,
Trevor I. Smith,
Paul J. Walter
Abstract:
Ishimoto, Davenport, and Wittmann have previously reported analyses of data from student responses to the Force and Motion Conceptual Evaluation (FMCE), in which they used item response curves (IRCs) to make claims about American and Japanese students' relative likelihood to choose certain incorrect responses to some questions. We have used an independent data set of over 6,500 American students'…
▽ More
Ishimoto, Davenport, and Wittmann have previously reported analyses of data from student responses to the Force and Motion Conceptual Evaluation (FMCE), in which they used item response curves (IRCs) to make claims about American and Japanese students' relative likelihood to choose certain incorrect responses to some questions. We have used an independent data set of over 6,500 American students' responses to the FMCE to generate IRCs to test their claims. Converting the IRCs to vectors, we used dot product analysis to compare each response item quantitatively. For most questions, our analyses are consistent with Ishimoto, Davenport, and Wittmann, with some results suggesting more minor differences between American and Japanese students than previously reported. We also highlight the pedagogical advantages of using IRCs to determine the differences in response patterns for different populations to better understand student thinking prior to instruction.
△ Less
Submitted 17 April, 2021;
originally announced April 2021.
-
Pre-impact dynamics of a droplet im**ing on a deformable surface
Authors:
Nathaniel I. J. Henman,
Frank T. Smith,
Manish K. Tiwari
Abstract:
The non-linear interaction between air and a water droplet just prior to high-speed im**ement on a surface is a phenomenon that has been researched extensively and occurs in a number of industrial settings. The role that surface deformation plays in an air cushioned impact of a liquid droplet is considered here. In a two-dimensional framework, assuming small density and viscosity ratios between…
▽ More
The non-linear interaction between air and a water droplet just prior to high-speed im**ement on a surface is a phenomenon that has been researched extensively and occurs in a number of industrial settings. The role that surface deformation plays in an air cushioned impact of a liquid droplet is considered here. In a two-dimensional framework, assuming small density and viscosity ratios between the air and the liquid, a reduced system of integro-differential equations is derived governing the liquid droplet free-surface shape, the pressure in the thin air film and the deformation of the surface, assuming the effects of surface tension, compressibility and gravity to be negligible. The deformation of the surface is first described in a rather general form, based on previous membrane-type models. The coupled system is then investigated in two cases: a soft viscoelastic case where the substrate stiffness and (viscous) dam** are considered and a more general flexible surface where all relevant parameters are retained. Numerical solutions are presented, highlighting a number of key consequences of substrate deformability on the pre-impact phase of droplet impact, such as reduction in pressure buildup, increased air entrapment and considerable delay to touchdown. Connections (including subtle dependence of the size of entrapped air on the droplet velocity, reduced pressure peaks and droplet gliding) with recent experiments and a large deformation analysis are also presented.
△ Less
Submitted 16 July, 2021; v1 submitted 4 April, 2021;
originally announced April 2021.
-
Pulseshape discrimination against low-energy Ar-39 beta decays in liquid argon with 4.5 tonne-years of DEAP-3600 data
Authors:
The DEAP Collaboration,
P. Adhikari,
R. Ajaj,
M. Alpízar-Venegas,
P. -A. Amaudruz,
D. J. Auty,
M. Batygov,
B. Beltran,
H. Benmansour,
C. E. Bina,
J. Bonatt,
W. Bonivento,
M. G. Boulay,
B. Broerman,
J. F. Bueno,
P. M. Burghardt,
A. Butcher,
M. Cadeddu,
B. Cai,
M. Cárdenas-Montes,
S. Cavuoti,
M. Chen,
Y. Chen,
B. T. Cleveland,
J. M. Corning
, et al. (104 additional authors not shown)
Abstract:
The DEAP-3600 detector searches for the scintillation signal from dark matter particles scattering on a 3.3 tonne liquid argon target. The largest background comes from $^{39}$Ar beta decays and is suppressed using pulseshape discrimination (PSD).
We use two types of PSD algorithm: the prompt-fraction, which considers the fraction of the scintillation signal in a narrow and a wide time window ar…
▽ More
The DEAP-3600 detector searches for the scintillation signal from dark matter particles scattering on a 3.3 tonne liquid argon target. The largest background comes from $^{39}$Ar beta decays and is suppressed using pulseshape discrimination (PSD).
We use two types of PSD algorithm: the prompt-fraction, which considers the fraction of the scintillation signal in a narrow and a wide time window around the event peak, and the log-likelihood-ratio, which compares the observed photon arrival times to a signal and a background model. We furthermore use two algorithms to determine the number of photons detected at a given time: (1) simply dividing the charge of each PMT pulse by the charge of a single photoelectron, and (2) a likelihood analysis that considers the probability to detect a certain number of photons at a given time, based on a model for the scintillation pulseshape and for afterpulsing in the light detectors.
The prompt-fraction performs approximately as well as the log-likelihood-ratio PSD algorithm if the photon detection times are not biased by detector effects. We explain this result using a model for the information carried by scintillation photons as a function of the time when they are detected.
△ Less
Submitted 6 April, 2021; v1 submitted 22 March, 2021;
originally announced March 2021.
-
Multiparametric Cardiac 18F-FDG PET: Pilot Comparison of FDG Delivery Rate with 82Rb Myocardial Blood Flow
Authors:
Yang Zuo,
Javier E. Lopez,
Thomas W. Smith,
Cameron C. Foster,
Richard E. Carson,
Ramsey D. Badawi,
Guobao Wang
Abstract:
Myocardial blood flow (MBF) and flow reserve are usually quantified in the clinic with positron emission tomography (PET) using a perfusion-specific radiotracer (e.g. 82Rbchloride). However, the clinical accessibility of existing perfusion tracers remains limited. Meanwhile, 18F-fluorodeoxyglucose (FDG) is a commonly used radiotracer for PET metabolic imaging without similar limitations. In this p…
▽ More
Myocardial blood flow (MBF) and flow reserve are usually quantified in the clinic with positron emission tomography (PET) using a perfusion-specific radiotracer (e.g. 82Rbchloride). However, the clinical accessibility of existing perfusion tracers remains limited. Meanwhile, 18F-fluorodeoxyglucose (FDG) is a commonly used radiotracer for PET metabolic imaging without similar limitations. In this paper, we explore the potential of 18F-FDG for myocardial perfusion imaging by comparing the myocardial FDG delivery rate K1 with MBF as determined by dynamic 82Rb PET in fourteen human subjects with heart disease. Two sets of FDG K1 were derived from one-hour dynamic FDG scans. One was the original FDG K1 estimates and the other was the corresponding K1 values that were linearly normalized for blood glucose levels. A generalized Renkin-Crone model was used to fit FDG K1 with Rb MBF, which then allowed for a nonlinear extraction fraction correction for converting FDG K1 to MBF. The linear correlation between FDG-derived MBF and Rb MBF was moderate (r=0.79) before the glucose normalization and became much improved (r>0.9) after glucose normalization. The extraction fraction of FDG was also similar to that of Rb-chloride in the myocardium. The results from this pilot study suggest that dynamic cardiac FDG-PET with tracer kinetic modeling has the potential to provide MBF in addition to its conventional use for metabolic imaging.
△ Less
Submitted 12 July, 2021; v1 submitted 23 October, 2020;
originally announced October 2020.
-
The Physics Inventory of Quantitative Literacy: A tool for assessing mathematical reasoning in introductory physics
Authors:
Suzanne White Brahmia,
Alexis Olsho,
Trevor I. Smith,
Andrew Boudreaux,
Philip Eaton,
Charlotte Zimmerman
Abstract:
One desired outcome of introductory physics instruction is that students will develop facility with reasoning quantitatively about physical phenomena. Little research has been done regarding how students develop the algebraic concepts and skills involved in reasoning productively about physics quantities, which is different from either understanding of physics concepts or problem-solving abilities…
▽ More
One desired outcome of introductory physics instruction is that students will develop facility with reasoning quantitatively about physical phenomena. Little research has been done regarding how students develop the algebraic concepts and skills involved in reasoning productively about physics quantities, which is different from either understanding of physics concepts or problem-solving abilities. We introduce the Physics Inventory of Quantitative Literacy (PIQL) as a tool for measuring quantitative literacy, a foundation of mathematical reasoning, in the context of introductory physics. We present the development of the PIQL and evidence of its validity for use in calculus-based introductory physics courses. Unlike concept inventories, the PIQL is a reasoning inventory, and can be used to assess reasoning over the span of students' instruction in introductory physics. Although mathematical reasoning associated with the PIQL is taught in prior mathematics courses, pre/post test scores reveal that this reasoning isn't readily used by most students in physics, nor does it develop as part of physics instruction--even in courses that use high-quality, research-based curricular materials. As has been the case with many inventories in physics education, we expect use of the PIQL to support the development of instructional strategies and materials--in this case, designed to meet the course objective that all students become quantitatively literate in introductory physics.
△ Less
Submitted 9 June, 2021; v1 submitted 22 September, 2020;
originally announced September 2020.
-
Multiparametric Cardiac 18F-FDG PET in Humans: Kinetic Model Selection and Identifiability Analysis
Authors:
Yang Zuo,
Ramsey D. Badawi,
Cameron C. Foster,
Thomas Smith,
Javier E. Lopez,
Guobao Wang
Abstract:
Cardiac 18F-FDG PET has been used in clinics to assess myocardial glucose metabolism. Its ability for imaging myocardial glucose transport, however, has rarely been exploited in clinics. Using the dynamic FDG-PET scans of ten patients with coronary artery disease, we investigate in this paper appropriate dynamic scan and kinetic modeling protocols for efficient quantification of myocardial glucose…
▽ More
Cardiac 18F-FDG PET has been used in clinics to assess myocardial glucose metabolism. Its ability for imaging myocardial glucose transport, however, has rarely been exploited in clinics. Using the dynamic FDG-PET scans of ten patients with coronary artery disease, we investigate in this paper appropriate dynamic scan and kinetic modeling protocols for efficient quantification of myocardial glucose transport. Three kinetic models and the effect of scan duration were evaluated by using statistical fit quality, assessing the impact on kinetic quantification, and analyzing the practical identifiability. The results show that the kinetic model selection depends on the scan duration. The reversible two-tissue model was needed for a one-hour dynamic scan. The irreversible two-tissue model was optimal for a scan duration of around 10-15 minutes. If the scan duration was shortened to 2-3 minutes, a one-tissue model was the most appropriate. For global quantification of myocardial glucose transport, we demonstrated that an early dynamic scan with a duration of 10-15 minutes and irreversible kinetic modeling was comparable to the full one-hour scan with reversible kinetic modeling. Myocardial glucose transport quantification provides an additional physiological parameter on top of the existing assessment of glucose metabolism and has the potential to enable single tracer multiparametric imaging in the myocardium.
△ Less
Submitted 23 October, 2020; v1 submitted 12 August, 2020;
originally announced August 2020.
-
Exploring student facility with "goes like'' reasoning in introductory physics
Authors:
Charlotte Zimmerman,
Alexis Olsho,
Andrew Boudreaux,
Trevor Smith,
Philip Eaton,
Suzanne White Brahmia
Abstract:
Covariational reasoning -- reasoning about how changes in one quantity relate to changes in another quantity -- has been examined extensively in mathematics education research. Little research has been done, however, on covariational reasoning in introductory physics contexts. We explore one aspect of covariational reasoning: ``goes like'' reasoning. ``Goes like'' reasoning refers to ways physicis…
▽ More
Covariational reasoning -- reasoning about how changes in one quantity relate to changes in another quantity -- has been examined extensively in mathematics education research. Little research has been done, however, on covariational reasoning in introductory physics contexts. We explore one aspect of covariational reasoning: ``goes like'' reasoning. ``Goes like'' reasoning refers to ways physicists relate two quantities through a simplified function. For example, physicists often say that ``the electric field goes like one over r squared.'' While this reasoning mode is used regularly by physicists and physics instructors, how students make sense of and use it remains unclear. We present evidence from reasoning inventory items which indicate that many students are sense making with tools from prior math instruction, that could be developed into expert ``goes like'' thinking with direct instruction. Recommendations for further work in characterizing student sense making as a foundation for future development of instruction are made.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
When negative is not "less than zero": Electric charge as a signed quantity
Authors:
Alexis Olsho,
Suzanne White Brahmia,
Andrew Boudreaux,
Trevor Smith
Abstract:
Electromagnetism (E&M) is often challenging for students enrolled in introductory college-level physics courses. Compared to mechanics, the mathematics of E&M is more sophisticated and the representations are more abstract. Furthermore, students may lack productive intuitions they had with force and motion. In this article, we explore the mathematization of electric charge. Specifically, we explor…
▽ More
Electromagnetism (E&M) is often challenging for students enrolled in introductory college-level physics courses. Compared to mechanics, the mathematics of E&M is more sophisticated and the representations are more abstract. Furthermore, students may lack productive intuitions they had with force and motion. In this article, we explore the mathematization of electric charge. Specifically, we explore how difficulties with positive and negative signs can arise for learners who approach integers primarily as positions on a number line.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
Online administration of a reasoning inventory in development
Authors:
Alexis Olsho,
Suzanne White Brahmia,
Trevor Smith,
Charlotte Zimmerman,
Andrew Boudreaux,
Philip Eaton
Abstract:
We are develo** a new research based assessment (RBA) focused on quantitative reasoning -- rather than conceptual understanding -- in physics contexts. We rapidly moved administration of the RBA online in Spring 2020 due to the COVID-19 pandemic. We present our experiences with online, unproctored administration of an RBA in development to students enrolled in a large-enrollment, calculus-based,…
▽ More
We are develo** a new research based assessment (RBA) focused on quantitative reasoning -- rather than conceptual understanding -- in physics contexts. We rapidly moved administration of the RBA online in Spring 2020 due to the COVID-19 pandemic. We present our experiences with online, unproctored administration of an RBA in development to students enrolled in a large-enrollment, calculus-based, introductory physics course. We describe our attempts to adhere to best practices on a limited time frame, and present a preliminary analysis of the results, comparing results from the online administration to earlier results from in-person, proctored administration. We include discussion of online administration of multiple-choice/multiple-response (MCMR) items, which we use on the instrument as a way to probe multiple facets of student reasoning. Our initial comparison indicates little difference between online and paper administrations of the RBA, consistent with previous work by other researchers.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
Toward a valid instrument for measuring physics quantitative literacy
Authors:
Trevor I. Smith,
Philip Eaton,
Suzanne White Brahmia,
Alexis Olsho,
Andrew Boudreaux,
Charlotte Zimmerman
Abstract:
We have developed the Physics Inventory of Quantitative Literacy (PIQL) as a tool to measure students' quantitative literacy in the context of introductory physics topics. We present the results from various quantitative analyses used to establish the validity of both the individual items and the PIQL as a whole. We show how examining the results from classical test theory analyses, factor analysi…
▽ More
We have developed the Physics Inventory of Quantitative Literacy (PIQL) as a tool to measure students' quantitative literacy in the context of introductory physics topics. We present the results from various quantitative analyses used to establish the validity of both the individual items and the PIQL as a whole. We show how examining the results from classical test theory analyses, factor analysis, and item response curves informed decisions regarding the inclusion, removal, or modification of items. We also discuss how the choice to include multiple-choice/multiple-response items has informed both our choices for analyses and the interpretations of their results. We are confident that the most recent version of the PIQL is a valid and reliable instrument for measuring students' physics quantitative literacy in calculus-based introductory physics courses at our primary research site. More data are needed to establish its validity for use at other institutions and in other courses.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
Fisher formalism for anisotropic gravitational-wave background searches with pulsar timing arrays
Authors:
Yacine Ali-Haïmoud,
Tristan L. Smith,
Chiara M. F. Mingarelli
Abstract:
Pulsar timing arrays (PTAs) are currently the only experiments directly sensitive to gravitational waves with decade-long periods. Within the next five to ten years, PTAs are expected to detect the stochastic gravitational-wave background (SGWB) collectively sourced by inspiralling supermassive black hole binaries. It is expected that this background is mostly isotropic, and current searches focus…
▽ More
Pulsar timing arrays (PTAs) are currently the only experiments directly sensitive to gravitational waves with decade-long periods. Within the next five to ten years, PTAs are expected to detect the stochastic gravitational-wave background (SGWB) collectively sourced by inspiralling supermassive black hole binaries. It is expected that this background is mostly isotropic, and current searches focus on the monopole part of the SGWB. Looking ahead, anisotropies in the SGWB may provide a trove of additional information both on known and unknown astrophysical and cosmological sources. In this paper, we build a simple yet realistic Fisher formalism for anisotropic SGWB searches with PTAs. Our formalism is able to accommodate realistic properties of PTAs, and allows simple and accurate forecasts. We illustrate our approach with an idealized PTA consisting of identical, isotropically distributed pulsars. In a companion paper, we apply our formalism to current PTAs and show that it can be a powerful tool to guide and optimize real data analysis.
△ Less
Submitted 30 November, 2020; v1 submitted 25 June, 2020;
originally announced June 2020.
-
High Rayleigh number variational multiscale large eddy simulations of Rayleigh-Bénard Convection
Authors:
David Sondak,
Thomas M. Smith,
Roger P. Pawlowski,
Sidafa Conde,
John N. Shadid
Abstract:
The variational multiscale (VMS) formulation is used to develop residual-based VMS large eddy simulation (LES) models for Rayleigh-Bénard convection. The resulting model is a mixed model that incorporates the VMS model and an eddy viscosity model. The Wall-Adapting Local Eddy-viscosity (WALE) model is used as the eddy viscosity model in this work. The new LES models were implemented in the finite…
▽ More
The variational multiscale (VMS) formulation is used to develop residual-based VMS large eddy simulation (LES) models for Rayleigh-Bénard convection. The resulting model is a mixed model that incorporates the VMS model and an eddy viscosity model. The Wall-Adapting Local Eddy-viscosity (WALE) model is used as the eddy viscosity model in this work. The new LES models were implemented in the finite element code Drekar. Simulations are performed using continuous, piecewise linear finite elements. The simulations ranged from $Ra = 10^6$ to $Ra = 10^{14}$ and were conducted at $Pr = 1$ and $Pr = 7$. Two domains were considered: a two-dimensional domain of aspect ratio 2 with a fluid confined between two parallel plates and a three-dimensional cylinder of aspect ratio $1/4$. The Nusselt number from the VMS results is compared against three dimensional direct numerical simulations and experiments. In all cases, the VMS results are in good agreement with existing literature.
△ Less
Submitted 20 May, 2020;
originally announced May 2020.
-
Mechanical Ventilator Milano (MVM): A Novel Mechanical Ventilator Designed for Mass Scale Production in Response to the COVID-19 Pandemic
Authors:
C. Galbiati,
A. Abba,
P. Agnes,
P. Amaudruz,
M. Arba,
F. Ardellier-Desages,
C. Badia,
G. Batignani,
G. Bellani,
G. Bianchi,
D. Bishop,
V. Bocci,
W. Bonivento,
B. Bottino,
M. Bouchard,
S. Brice,
G. Buccino,
S. Bussino,
A. Caminata,
A. Capra,
M. Caravati,
M. Carlini,
L. Carrozzi,
J. M. Cela,
B. Celano
, et al. (123 additional authors not shown)
Abstract:
Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equ…
▽ More
Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equivalent of the old and reliable Manley Ventilator, and is able to operate in both pressure-controlled and pressure-supported ventilation modes. MVM is optimized for the COVID-19 emergency, thanks to the collaboration with medical doctors in the front line. MVM is designed for large-scale production in a short amount of time and at a limited cost, as it relays on off-the-shelf components, readily available worldwide. Operation of the MVM requires only a source of compressed oxygen (or compressed medical air) and electrical power. Initial tests of a prototype device with a breathing simulator are also presented. Further tests and developments are underway. At this stage the MVM is not yet a certified medical device but certification is in progress.
△ Less
Submitted 10 April, 2020; v1 submitted 23 March, 2020;
originally announced March 2020.
-
Recent developments in the PySCF program package
Authors:
Qiming Sun,
Xing Zhang,
Samragni Banerjee,
Peng Bao,
Marc Barbry,
Nick S. Blunt,
Nikolay A. Bogdanov,
George H. Booth,
Jia Chen,
Zhi-Hao Cui,
Janus Juul Eriksen,
Yang Gao,
Sheng Guo,
Jan Hermann,
Matthew R. Hermes,
Kevin Koh,
Peter Koval,
Susi Lehtola,
Zhendong Li,
Junzi Liu,
Narbe Mardirossian,
James D. McClain,
Mario Motta,
Bastien Mussard,
Hung Q. Pham
, et al. (24 additional authors not shown)
Abstract:
PYSCF is a Python-based general-purpose electronic structure platform that both supports first-principles simulations of molecules and solids, as well as accelerates the development of new methodology and complex computational workflows. The present paper explains the design and philosophy behind PYSCF that enables it to meet these twin objectives. With several case studies, we show how users can…
▽ More
PYSCF is a Python-based general-purpose electronic structure platform that both supports first-principles simulations of molecules and solids, as well as accelerates the development of new methodology and complex computational workflows. The present paper explains the design and philosophy behind PYSCF that enables it to meet these twin objectives. With several case studies, we show how users can easily implement their own methods using PYSCF as a development environment. We then summarize the capabilities of PYSCF for molecular and solid-state simulations. Finally, we describe the growing ecosystem of projects that use PYSCF across the domains of quantum chemistry, materials science, machine learning and quantum information science.
△ Less
Submitted 10 July, 2020; v1 submitted 27 February, 2020;
originally announced February 2020.
-
Two-photon X-ray Ghost Microscope
Authors:
Thomas A. Smith,
Zhehui Wang,
Yanhua Shih
Abstract:
X-ray imaging allows for a non-invasive image of the internal structure of an object. The most common form of X-ray imaging, projectional radiography, is simply a projection or "shadow" of the object rather than a point-to-point image possible with a lens. This technique fails to take advantage of the resolving capabilities of short-wavelength X rays. Various X-ray microscopes, typically operating…
▽ More
X-ray imaging allows for a non-invasive image of the internal structure of an object. The most common form of X-ray imaging, projectional radiography, is simply a projection or "shadow" of the object rather than a point-to-point image possible with a lens. This technique fails to take advantage of the resolving capabilities of short-wavelength X rays. Various X-ray microscopes, typically operating with soft X rays (< 10 keV), use focusing X-ray optics to obtain higher resolution images of the internal structure of an object. Due to the short focal length of focusing X-ray optics, it becomes difficult to focus on the internal structure of larger objects in such a way to provide significant magnification to be resolvable. Here we present an imaging mechanism that utilizes two-photon X-ray ghost imaging to produce a true point-to-point image of the internal structure of an object, with the potential to introduce focusing X-ray optics or a scintillator-lens pairing to produce a magnified secondary ghost image. The focusing X-ray optics would image the primary ghost image (which has no physical structure to it) allowing the imaging of internal structures deeper than a standard X-ray microscope would allow. In principle, once some experimental barriers are overcome, this X-ray "ghost microscope" may achieve nanometer spatial resolution and open up new capabilities that would be of interest to the fields of physics, material science, and medical imaging.
△ Less
Submitted 29 June, 2020; v1 submitted 5 February, 2020;
originally announced February 2020.
-
The liquid-argon scintillation pulseshape in DEAP-3600
Authors:
The DEAP collaboration,
P. Adhikari,
R. Ajaj,
G. R. Araujoand M. Batygov,
B. Beltran,
C. E. Bina,
M. G. Boulay,
B. Broerman,
J. F. Bueno,
A. Butcher,
B. Cai,
M. Cárdenas-Montes,
S. Cavuoti,
Y. Chen,
B. T. Cleveland,
J. M. Corning,
S. J. Daughertyand K. Dering,
L. Doria,
F. A. Duncan andM. Dunford,
A. Erlandson,
N. Fatemighomi,
G. Fiorillo,
A. Flower,
R. J. Ford,
R. Gagnon
, et al. (76 additional authors not shown)
Abstract:
DEAP-3600 is a liquid-argon scintillation detector looking for dark matter. Scintillation events in the liquid argon (LAr) are registered by 255 photomultiplier tubes (PMTs), and pulseshape discrimination (PSD) is used to suppress electromagnetic background events. The excellent PSD performance of LAr makes it a viable target for dark matter searches, and the LAr scintillation pulseshape discussed…
▽ More
DEAP-3600 is a liquid-argon scintillation detector looking for dark matter. Scintillation events in the liquid argon (LAr) are registered by 255 photomultiplier tubes (PMTs), and pulseshape discrimination (PSD) is used to suppress electromagnetic background events. The excellent PSD performance of LAr makes it a viable target for dark matter searches, and the LAr scintillation pulseshape discussed here is the basis of PSD.
The observed pulseshape is a combination of LAr scintillation physics with detector effects. We present a model for the pulseshape of electromagnetic background events in the energy region of interest for dark matter searches. The model is composed of a) LAr scintillation physics, including the so-called intermediate component, b) the time response of the TPB wavelength shifter, including delayed TPB emission at $\mathcal O$(ms) time-scales, and c) PMT response.
TPB is the wavelength shifter of choice in most LAr detectors. We find that approximately 10\% of the intensity of the wavelength-shifted light is in a long-lived state of TPB. This causes light from an event to spill into subsequent events to an extent not usually accounted for in the design and data analysis of LAr-based detectors.
△ Less
Submitted 8 June, 2020; v1 submitted 27 January, 2020;
originally announced January 2020.
-
Towards understanding and characterizing expert covariational reasoning in physics
Authors:
Charlotte Zimmerman,
Alexis Olsho,
Michael Loverude,
Andrew Boudreaux,
Trevor Smith,
Suzanne White Brahmia
Abstract:
Relating two quantities to describe a physical system or process is at the heart of "doing physics" for novices and experts alike. In this paper, we explore the ways in which experts use covariational reasoning when solving introductory physics graphing problems. Here, graduate students are considered experts for the introductory level material, as they often take the role of instructor at large r…
▽ More
Relating two quantities to describe a physical system or process is at the heart of "doing physics" for novices and experts alike. In this paper, we explore the ways in which experts use covariational reasoning when solving introductory physics graphing problems. Here, graduate students are considered experts for the introductory level material, as they often take the role of instructor at large research universities. Drawing on work from Research in Undergraduate Mathematics Education (RUME), we replicated a study of mathematics experts' covariational reasoning done by Hobson and Moore with physics experts [N. L. F. Hobson and K. C. Moore, in RUME Conference Proceedings, pp. 664-672 (2017)]. We conducted think-aloud interviews with 10 physics graduate students using tasks minimally adapted from the mathematics study. Adaptations were made solely for the purpose of participant understanding of the question, and validated by preliminary interviews. Preliminary findings suggest physics experts approach covariational reasoning problems significantly differently than mathematics experts. In particular, two behaviors are identified in the reasoning of expert physicists that were not seen in the mathematics study. We introduce these two behaviors, which we call Using Compiled Relationships and Neighborhood Analysis, and articulate their differences from the behaviors articulated by Hobson and Moore. Finally, we share implications for instruction and questions for further research.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
A Conceptual Blend Analysis of Physics Quantitative Literacy Reasoning Inventory Items
Authors:
Suzanne White Brahmia,
Alexis Olsho,
Andrew Boudreaux,
Trevor Smith,
Charlotte Zimmerman
Abstract:
Mathematical reasoning flexibility across physics contexts is a desirable learning outcome of introductory physics, where the math world and physical world meet. Physics Quantitative Literacy (PQL) is a set of interconnected skills and habits of mind that support quantitative reasoning about the physical world. The Physics Inventory of Quantitative Literacy (PIQL), which we are currently refining…
▽ More
Mathematical reasoning flexibility across physics contexts is a desirable learning outcome of introductory physics, where the math world and physical world meet. Physics Quantitative Literacy (PQL) is a set of interconnected skills and habits of mind that support quantitative reasoning about the physical world. The Physics Inventory of Quantitative Literacy (PIQL), which we are currently refining and validating, assesses students proportional reasoning, covariational reasoning, and reasoning with signed quantities in physics contexts. In this paper, we apply a Conceptual Blending Theory analysis of two exemplar PIQL items to demonstrate how we are using this theory to help develop an instrument that represents the kind of blended reasoning that characterizes expertise in physics. A Conceptual Blending Theory analysis allows for assessment of hierarchical partially correct reasoning patterns, and thereby holds potential to map the emergence of mathematical reasoning flexibility throughout the introductory physics sequence.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
Using psychometric tools as a window into students' quantitative reasoning in introductory physics
Authors:
Trevor I. Smith,
Philip Eaton,
Suzanne White Brahmia,
Alexis Olsho,
Andrew Boudreaux,
Chris DePalma,
Victor LaSasso,
Scott Straguzzi,
Christopher Whitener
Abstract:
The Physics Inventory of Quantitative Literacy (PIQL), a reasoning inventory under development, aims to assess students' physics quantitative literacy at the introductory level. The PIQL's design presents the challenge of isolating types of mathematical reasoning that are independent of each other in physics questions. In its current form, the PIQL spans three principle reasoning subdomains previo…
▽ More
The Physics Inventory of Quantitative Literacy (PIQL), a reasoning inventory under development, aims to assess students' physics quantitative literacy at the introductory level. The PIQL's design presents the challenge of isolating types of mathematical reasoning that are independent of each other in physics questions. In its current form, the PIQL spans three principle reasoning subdomains previously identified in mathematics and physics education research: ratios and proportions, covariation, and signed (negative) quantities. An important psychometric objective is to test the orthogonality of these three reasoning subdomains. We present results from exploratory factor analysis, confirmatory factor analysis, and module analysis that inform interpretations of the underlying structure of the PIQL from a student viewpoint, emphasizing ways in which these results agree and disagree with expert categorization. In addition to informing the development of existing and new PIQL assessment items, these results are also providing exciting insights into students' quantitative reasoning at the introductory level.
△ Less
Submitted 1 October, 2019; v1 submitted 11 July, 2019;
originally announced July 2019.
-
Provably Optimal Parallel Transport Sweeps on Semi-Structured Grids
Authors:
Michael P. Adams,
Marvin L. Adams,
W. Daryl Hawkins,
Timmie Smith,
Lawrence Rauchwerger,
Nancy M. Amato,
Teresa S. Bailey,
Robert D. Falgout,
Adam Kunen,
Peter Brown
Abstract:
We have found provably optimal algorithms for full-domain discrete-ordinate transport sweeps on a class of grids in 2D and 3D Cartesian geometry that are regular at a coarse level but arbitrary within the coarse blocks. We describe these algorithms and show that they always execute the full eight-octant (or four-quadrant if 2D) sweep in the minimum possible number of stages for a given Px x Py x P…
▽ More
We have found provably optimal algorithms for full-domain discrete-ordinate transport sweeps on a class of grids in 2D and 3D Cartesian geometry that are regular at a coarse level but arbitrary within the coarse blocks. We describe these algorithms and show that they always execute the full eight-octant (or four-quadrant if 2D) sweep in the minimum possible number of stages for a given Px x Py x Pz partitioning. Computational results confirm that our optimal scheduling algorithms execute sweeps in the minimum possible stage count. Observed parallel efficiencies agree well with our performance model. Our PDT transport code has achieved approximately 68% parallel efficiency with > 1.5M parallel threads, relative to 8 threads, on a simple weak-scaling problem with only three energy groups, 10 direction per octant, and 4096 cells/core. We demonstrate similar efficiencies on a much more realistic set of nuclear-reactor test problems, with unstructured meshes that resolve fine geometric details. These results demonstrate that discrete-ordinates transport sweeps can be executed with high efficiency using more than 106 parallel processes.
△ Less
Submitted 7 June, 2019;
originally announced June 2019.
-
Quantitatively ranking incorrect responses to multiple-choice questions using item response theory
Authors:
Trevor I. Smith,
Kyle J. Louis,
Bartholomew J. Ricci IV,
Nasrine Bendjilali
Abstract:
Research-based assessment instruments (RBAIs) are ubiquitous throughout both physics instruction and physics education research. The vast majority of analyses involving student responses to RBAI questions have focused on whether or not a student selects correct answers and using correctness to measure growth. This approach often undervalues the rich information that may be obtained by examining st…
▽ More
Research-based assessment instruments (RBAIs) are ubiquitous throughout both physics instruction and physics education research. The vast majority of analyses involving student responses to RBAI questions have focused on whether or not a student selects correct answers and using correctness to measure growth. This approach often undervalues the rich information that may be obtained by examining students' particular choices of incorrect answers. In the present study, we aim to reveal some of this valuable information by quantitatively determining the relative correctness of various incorrect responses. To accomplish this, we propose an assumption that allow us to define relative correctness: students who have a high understanding of Newtonian physics are likely to answer more questions correctly and also more likely to choose better incorrect responses, than students who have a low understanding. Analyses using item response theory align with this assumption, and Bock's nominal response model allows us to uniquely rank each incorrect response. We present results from over 7,000 students' responses to the Force and Motion Conceptual Evaluation.
△ Less
Submitted 2 June, 2019;
originally announced June 2019.
-
NetKet: A Machine Learning Toolkit for Many-Body Quantum Systems
Authors:
Giuseppe Carleo,
Kenny Choo,
Damian Hofmann,
James E. T. Smith,
Tom Westerhout,
Fabien Alet,
Emily J. Davis,
Stavros Efthymiou,
Ivan Glasser,
Sheng-Hsuan Lin,
Marta Mauri,
Guglielmo Mazzola,
Christian B. Mendl,
Evert van Nieuwenburg,
Ossian O'Reilly,
Hugo Théveniaut,
Giacomo Torlai,
Alexander Wietek
Abstract:
We introduce NetKet, a comprehensive open source framework for the study of many-body quantum systems using machine learning techniques. The framework is built around a general and flexible implementation of neural-network quantum states, which are used as a variational ansatz for quantum wave functions. NetKet provides algorithms for several key tasks in quantum many-body physics and quantum tech…
▽ More
We introduce NetKet, a comprehensive open source framework for the study of many-body quantum systems using machine learning techniques. The framework is built around a general and flexible implementation of neural-network quantum states, which are used as a variational ansatz for quantum wave functions. NetKet provides algorithms for several key tasks in quantum many-body physics and quantum technology, namely quantum state tomography, supervised learning from wave-function data, and ground state searches for a wide range of customizable lattice models. Our aim is to provide a common platform for open research and to stimulate the collaborative development of computational methods at the interface of machine learning and many-body physics.
△ Less
Submitted 29 March, 2019;
originally announced April 2019.
-
A framework for the natures of negativity in introductory physics
Authors:
Suzanne White Brahmia,
Alexis Olsho,
Trevor I. Smith,
Andrew Boudreaux
Abstract:
Mathematical reasoning skills are a desired outcome of many introductory physics courses, particularly calculus-based physics courses. Positive and negative quantities are ubiquitous in physics, and the sign carries important and varied meanings. Novices can struggle to understand the many roles signed numbers play in physics contexts, and recent evidence shows that unresolved struggle can carry o…
▽ More
Mathematical reasoning skills are a desired outcome of many introductory physics courses, particularly calculus-based physics courses. Positive and negative quantities are ubiquitous in physics, and the sign carries important and varied meanings. Novices can struggle to understand the many roles signed numbers play in physics contexts, and recent evidence shows that unresolved struggle can carry over to subsequent physics courses. The mathematics education research literature documents the cognitive challenge of conceptualizing negative numbers as mathematical objects--both for experts, historically, and for novices as they learn. We contribute to the small but growing body of research in physics contexts that examines student reasoning about signed quantities and reasoning about the use and interpretation of signs in mathematical models. In this paper we present a framework for categorizing various meanings and interpretations of the negative sign in physics contexts, inspired by established work in algebra contexts from the mathematics education research community. Such a framework can support innovation that can catalyze deeper mathematical conceptualizations of signed quantities in the introductory courses and beyond.
△ Less
Submitted 9 March, 2019;
originally announced March 2019.
-
Develo** a reasoning inventory for measuring physics quantitative literacy
Authors:
Trevor I. Smith,
Suzanne W. Brahmia,
Alexis Olsho,
Andrew Boudreaux,
Philip Eaton,
Paul J. Kelly,
Kyle J. Louis,
Mitchell A. Nussenbaum,
Louis J. Remy
Abstract:
In an effort to improve the quality of citizen engagement in workplace, politics, and other domains in which quantitative reasoning plays an important role, Quantitative Literacy (QL) has become the focus of considerable research and development efforts in mathematics education. QL is characterized by sophisticated reasoning with elementary mathematics. In this project, we extend the notions of QL…
▽ More
In an effort to improve the quality of citizen engagement in workplace, politics, and other domains in which quantitative reasoning plays an important role, Quantitative Literacy (QL) has become the focus of considerable research and development efforts in mathematics education. QL is characterized by sophisticated reasoning with elementary mathematics. In this project, we extend the notions of QL to include the physics domain and call it Physics Quantitative Literacy (PQL). We report on early stage development from a collaboration that focuses on reasoning inventory design and data analysis methodology for measuring the development of PQL across the introductory physics sequence. We have piloted a prototype assessment designed to measure students' PQL in introductory physics: Physics Inventory of Quantitative Literacy (PIQL). This prototype PIQL focuses on two components of PQL: proportional reasoning, and reasoning with negative quantities. We present preliminary results from approximately 1,000 undergraduate and 20 graduate students.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
Influence Estimation on Social Media Networks Using Causal Inference
Authors:
Steven T. Smith,
Edward K. Kao,
Danelle C. Shah,
Olga Simek,
Donald B. Rubin
Abstract:
Estimating influence on social media networks is an important practical and theoretical problem, especially because this new medium is widely exploited as a platform for disinformation and propaganda. This paper introduces a novel approach to influence estimation on social media networks and applies it to the real-world problem of characterizing active influence operations on Twitter during the 20…
▽ More
Estimating influence on social media networks is an important practical and theoretical problem, especially because this new medium is widely exploited as a platform for disinformation and propaganda. This paper introduces a novel approach to influence estimation on social media networks and applies it to the real-world problem of characterizing active influence operations on Twitter during the 2017 French presidential elections. The new influence estimation approach attributes impact by accounting for narrative propagation over the network using a network causal inference framework applied to data arising from graph sampling and filtering. This causal framework infers the difference in outcome as a function of exposure, in contrast to existing approaches that attribute impact to activity volume or topological features, which do not explicitly measure nor necessarily indicate actual network influence. Cramér-Rao estimation bounds are derived for parameter estimation as a step in the causal analysis, and used to achieve geometrical insight on the causal inference problem. The ability to infer high causal influence is demonstrated on real-world social media accounts that are later independently confirmed to be either directly affiliated or correlated with foreign influence operations using evidence supplied by the U.S. Congress and journalistic reports.
△ Less
Submitted 11 April, 2018;
originally announced April 2018.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Plasmonic Hot-Carrier Extraction: Mechanisms of Electron Emission
Authors:
Charlene Ng,
Peng Zeng,
Julian A. Lloyd,
Debadi Chakraborty,
Ann Roberts,
Trevor A. Smith,
Udo Bach,
John E. Sader,
Timothy J. Davis,
Daniel E. Gómez
Abstract:
When plasmonic nanoparticles are coupled with semiconductors, highly energetic hot carriers can be extracted from the metal-semiconductor interface for various applications in light energy conversion. Hot charge-carrier extraction upon plasmon decay using such an interface has been argued to occur after the formation of an intermediate electron population with a uniform momentum distribution. The…
▽ More
When plasmonic nanoparticles are coupled with semiconductors, highly energetic hot carriers can be extracted from the metal-semiconductor interface for various applications in light energy conversion. Hot charge-carrier extraction upon plasmon decay using such an interface has been argued to occur after the formation of an intermediate electron population with a uniform momentum distribution. The efficiency of the charge separation process is thus discussed to be limited by this spatial homogeneity in certain plasmon-induced applications. Here we demonstrate using visible pump, near-infrared probe transient absorption spectroscopy that increases in the contact area between metal and semiconductor leads to an increase in the quantum yield for hot electron injection that is inconsistent with the homogeneous energy-momentum distribution of hot-electrons. Instead, further analysis of the experimental data suggests that the highly energetic electrons are emitted across the interface via a surface charge emission mechanism that occurs via a plasmon excitation
△ Less
Submitted 19 November, 2017;
originally announced November 2017.