-
The Design, Implementation, and Performance of the LZ Calibration Systems
Authors:
J. Aalbers,
D. S. Akerib,
A. K. Al Musalhi,
F. Alder,
C. S. Amarasinghe,
A. Ames,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
J. E. Armstrong,
M. Arthurs,
A. Baker,
S. Balashov,
J. Bang,
E. E. Barillier,
J. W. Bargemann,
K. Beattie,
T. Benson,
A. Bhatti,
A. Biekert,
T. P. Biesiadzinski,
H. J. Birch,
E. Bishop,
G. M. Blockinger,
B. Boxer
, et al. (179 additional authors not shown)
Abstract:
LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low e…
▽ More
LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low energy nuclear recoils. Surrounding the TPC, two veto detectors immersed in an ultra-pure water tank enable reducing background events to enhance the discovery potential. Intricate calibration systems are purposely designed to precisely understand the responses of these three detector volumes to various types of particle interactions and to demonstrate LZ's ability to discriminate between signals and backgrounds. In this paper, we present a comprehensive discussion of the key features, requirements, and performance of the LZ calibration systems, which play a crucial role in enabling LZ's WIMP-search and its broad science program. The thorough description of these calibration systems, with an emphasis on their novel aspects, is valuable for future calibration efforts in direct dark matter and other rare-event search experiments.
△ Less
Submitted 20 June, 2024; v1 submitted 2 May, 2024;
originally announced June 2024.
-
Equivalence of Polarizability and Circuit Models for Waveguide-Fed Metamaterial Elements
Authors:
David R. Smith,
Mohsen Sazegar,
Insang Yoo
Abstract:
A common variant of a metasurface antenna consists of an array of metamaterial elements coupled to a waveguide feed. The guided wave excites the metamaterial elements, coupling energy from the waveguide mode to radiation. Under appropriate conditions, each sub-wavelength metamaterial element can be modeled as a polarizable dipole, with the polarizability determined by an extraction procedure from…
▽ More
A common variant of a metasurface antenna consists of an array of metamaterial elements coupled to a waveguide feed. The guided wave excites the metamaterial elements, coupling energy from the waveguide mode to radiation. Under appropriate conditions, each sub-wavelength metamaterial element can be modeled as a polarizable dipole, with the polarizability determined by an extraction procedure from the computed or measured waveguide scattering parameters. Here we establish the equivalence of this polarizability description of a metamaterial element with an equivalent circuit model, providing an additional tool for metasurface design that offers significant insight and a path towards efficiently modeling very large apertures. With this equivalence established, more complicated external circuits that include lumped elements and devices such as diodes and transistors can be integrated into the metamaterial element, which can then be transformed into an equivalent polarizability for modeling in the coupled dipole framework. We derive appropriate circuit models for several basic metamaterial elements, which provide direct relationships between the equivalent circuit parameters of an element and its effective polarizability. These expressions are confirmed using scattering parameters for several example structures obtained via full-wave simulations.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
The Data Acquisition System of the LZ Dark Matter Detector: FADR
Authors:
J. Aalbers,
D. S. Akerib,
A. K. Al Musalhi,
F. Alder,
C. S. Amarasinghe,
A. Ames,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
J. E. Armstrong,
M. Arthurs,
A. Baker,
S. Balashov,
J. Bang,
E. E. Barillier,
J. W. Bargemann,
K. Beattie,
T. Benson,
A. Bhatti,
A. Biekert,
T. P. Biesiadzinski,
H. J. Birch,
E. Bishop,
G. M. Blockinger,
B. Boxer
, et al. (190 additional authors not shown)
Abstract:
The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals.…
▽ More
The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals. This information is used to determine if the digitized waveforms should be preserved for offline analysis.
The system is designed around the Kintex-7 FPGA. In addition to digitizing the PMT signals and providing basic event selection in real time, the flexibility provided by the use of FPGAs allows us to monitor the performance of the detector and the DAQ in parallel to normal data acquisition.
The hardware and software/firmware of this FPGA-based Architecture for Data acquisition and Realtime monitoring (FADR) are discussed and performance measurements are described.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Diffuse scattering from dynamically compressed single-crystal zirconium following the pressure-induced $α\toω$ phase transition
Authors:
P. G. Heighway,
S. Singh,
M. G. Gorman,
D. McGonegle,
J. H. Eggert,
R. F. Smith
Abstract:
The prototypical $α\toω$ phase transition in zirconium is an ideal test-bed for our understanding of polymorphism under extreme loading conditions. After half a century of study, a consensus had emerged that the transition is realized via one of two distinct displacive mechanisms, depending on the nature of the compression path. However, recent dynamic-compression experiments equipped with in situ…
▽ More
The prototypical $α\toω$ phase transition in zirconium is an ideal test-bed for our understanding of polymorphism under extreme loading conditions. After half a century of study, a consensus had emerged that the transition is realized via one of two distinct displacive mechanisms, depending on the nature of the compression path. However, recent dynamic-compression experiments equipped with in situ diffraction diagnostics performed in the past few years have revealed new transition mechanisms, demonstrating that our understanding of the underlying atomistic dynamics and transition kinetics is in fact far from complete. We present classical molecular dynamics simulations of the $α\toω$ phase transition in single-crystal zirconium shock-compressed along the [0001] axis using a machine-learning-class potential. The transition is predicted to proceed primarily via a modified version of the two-stage Usikov-Zilberstein mechanism, whereby the high-pressure $ω$-phase heterogeneously nucleates at boundaries between grains of an intermediate $β$-phase. We further observe the fomentation of atomistic disorder at the junctions between $β$ grains, leading to the formation of highly defective interstitial material between the $ω$ grains. We directly compare synthetic x-ray diffraction patterns generated from our simulations with those obtained using femtosecond diffraction in recent dynamic-compression experiments, and show that the simulations produce the same unique, anisotropic diffuse scattering signal unlike any previously seen from an elemental metal. Our simulations suggest that the diffuse signal arises from a combination of thermal diffuse scattering, nanoparticle-like scattering from residual kinetically stabilized $α$ and $β$ grains, and scattering from interstitial defective structures.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Low frequency coherent Raman imaging robust to optical scattering
Authors:
David R. Smith,
Jesse W. Wilson,
Siddarth Shivkumar,
Herve Rigneault,
Randy A. Bartels
Abstract:
We demonstrate low-frequency interferometric impulsive stimulated Raman scattering (ISRS) imaging with high robustness to distortions by optical scattering. ISRS is a pump-probe coherent Raman spectroscopy that can capture Raman vibrational spectra. Recording of ISRS spectra requires isolation of a probe pulse from the pump pulse. While this separation is simple in non-scattering specimens, such a…
▽ More
We demonstrate low-frequency interferometric impulsive stimulated Raman scattering (ISRS) imaging with high robustness to distortions by optical scattering. ISRS is a pump-probe coherent Raman spectroscopy that can capture Raman vibrational spectra. Recording of ISRS spectra requires isolation of a probe pulse from the pump pulse. While this separation is simple in non-scattering specimens, such as liquids, scattering leads to significant pump pulse contamination and prevent the extraction of a Raman spectrum. We introduce a robust method for ISRS microscopy that works in complex scattering samples. High signal-to-noise ISRS spectra are obtained even when the pump and probe pulses pass through many scattering layers.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
Measuring line tension: thermodynamic integration during detachment of a molecular dynamics droplet
Authors:
Minori Shintaku,
Haruki Oga,
Hiroki Kusudo,
Edward R. Smith,
Takeshi Omori,
Yasutaka Yamaguchi
Abstract:
The contact line (CL) is where solid, liquid and vapor phases meet, and Young's equation describes the macroscopic force balance of the interfacial tensions between these three phases. These interfacial tensions are related to the nanoscale stress inhomogeneity appearing around the interface, and for curved CLs, eg a three-dimensional droplet, another force known as the line tension must be includ…
▽ More
The contact line (CL) is where solid, liquid and vapor phases meet, and Young's equation describes the macroscopic force balance of the interfacial tensions between these three phases. These interfacial tensions are related to the nanoscale stress inhomogeneity appearing around the interface, and for curved CLs, eg a three-dimensional droplet, another force known as the line tension must be included in Young's equation. The line tension has units of force, acting parallel to the CL, and is required to incorporate the extra stress inhomogeneity around the CL into the force balance. Considering this feature, Bey et al. [J. Chem. Phys. \textbf{152}, 094707 (2020)] reported a mechanical approach to extract the value of line tension $\taul$ from molecular dynamics (MD) simulations. In this study, we show a novel thermodynamics interpretation of the line tension as the free energy per CL length, and based on this interpretation, through MD simulations of a quasi-static detachment process of a quasi-two-dimensional droplet from a solid surface, we obtained the value $\taul$ as a function of the contact angle. The simulation scheme is considered to be an extension of a thermodynamic integration method, previously used to calculate the solid-liquid and solid-vapor interfacial tensions through a detachment process, extended here to the three phase system. The obtained value agreed well with the result by Bey et al. and show the validity of thermodynamic integration at the three-phase interface.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
QUEST-DMC: Background Modelling and Resulting Heat Deposit for a Superfluid Helium-3 Bolometer
Authors:
S. Autti,
A. Casey,
N. Eng,
N. Darvishi,
P. Franchini,
R. P. Haley,
P. J. Heikkinen,
A. Kemp,
E. Leason,
L. V. Levitin,
J. Monroe,
J. March-Russel,
M. T. Noble,
J. R. Prance,
X. Rojas,
T. Salmon,
J. Saunders,
R. Smith,
M. D. Thompson,
V. Tsepelin,
S. M. West,
L. Whitehead,
K. Zhang,
D. E. Zmeev
Abstract:
We report the results of radioactivity assays and heat leak calculations for a range of common cryogenic materials, considered for use in the QUEST-DMC superfluid 3He dark matter detector. The bolometer, instrumented with nanomechanical resonators, will be sensitive to energy deposits from dark matter interactions. Events from radioactive decays and cosmic rays constitute a significant background…
▽ More
We report the results of radioactivity assays and heat leak calculations for a range of common cryogenic materials, considered for use in the QUEST-DMC superfluid 3He dark matter detector. The bolometer, instrumented with nanomechanical resonators, will be sensitive to energy deposits from dark matter interactions. Events from radioactive decays and cosmic rays constitute a significant background and must be precisely modelled, using a combination of material screening and Monte Carlo simulations. However, the results presented here are of wider interest for experiments and quantum devices sensitive to minute heat leaks and spurious events, thus we present heat leak per unit mass or surface area for every material studied. This can inform material choices for other experiments, especially if underground operation is considered where the radiogenic backgrounds will dominate even at shallow depths.
△ Less
Submitted 19 May, 2024; v1 submitted 31 January, 2024;
originally announced February 2024.
-
A Cryogen-Free Electron Beam Ion Trap for Astrophysically Relevant Spectroscopic Studies
Authors:
A. C. Gall,
A. Foster,
Y. Yang,
E. Takacs,
N. S. Brickhouse,
E. Silver,
R. K. Smith
Abstract:
The detailed design and operation of the Smithsonian Astrophysical Observatory's EBIT are described for the first time, including recent design upgrades that have led to improved system stability and greater user control, increasing the scope of possible experiments. Measurements of emission from highly charged Ar were taken to determine the spatial distribution of the ion cloud and electron beam.…
▽ More
The detailed design and operation of the Smithsonian Astrophysical Observatory's EBIT are described for the first time, including recent design upgrades that have led to improved system stability and greater user control, increasing the scope of possible experiments. Measurements of emission from highly charged Ar were taken to determine the spatial distribution of the ion cloud and electron beam. An optical setup consisting of two lenses, a narrow band filter, and a CCD camera was used to image visible light, while an X-ray pinhole and CCD camera were used to image X-rays. Measurements were used to estimate an effective electron density of 1.77 x 10$^{10}$ cm$^{-3}$. Additionally, observations of X-ray emission from background EBIT gases were measured with a Silicon Lithium detector. Measurements indicate the presence of Ba and Si, which are both easily removed by dum** the trap every 2 s or less.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Particle-In-Cell Code Comparison for Ion Acceleration: EPOCH and Smilei
Authors:
Soham Banerjee,
Joseph R. Smith,
Chris Orban
Abstract:
Particle-in-Cell (PIC) codes are a popular tool to model laser-plasma interactions. Many different PIC codes already exist, and many new PIC codes are being developed constantly. It is therefore important to compare different PIC codes to ascertain which code is best suited for a particular kind of physical problem. In a paper by Smith et al. (2021) they compared three different codes on a problem…
▽ More
Particle-in-Cell (PIC) codes are a popular tool to model laser-plasma interactions. Many different PIC codes already exist, and many new PIC codes are being developed constantly. It is therefore important to compare different PIC codes to ascertain which code is best suited for a particular kind of physical problem. In a paper by Smith et al. (2021) they compared three different codes on a problem relating to proton acceleration in the Target Normal Sheath Acceleration regime from a normal incidence ultra-intense laser pulse. Smith et al. (2021) included in their study the widely used EPOCH code. However, they did not include results from the Smilei code, which is another popular PIC code in the plasma community with a variety of features and physics packages. In the present work, we compare the Smilei code to the EPOCH code for the same test case as Smith et al. (2021). Broadly we find the two codes to be highly consistent with agreement in total ion, electron, and field energy at a percent level or better. The electron and ion energy distribution functions agree well at lower energies and the differences at higher energies (e.g. because of the finite number of macroparticles) are similar to what Smith et al. (2021) saw for other codes. We found that Smilei consumed 25% more RAM than EPOCH did but the execution time was 30% less for Smilei on one processor. We include the input files to encourage future comparisons.
△ Less
Submitted 25 December, 2023;
originally announced December 2023.
-
Machine Learning Based Compton Suppression for Nuclear Fusion Plasma Diagnostics
Authors:
Kimberley Lennon,
Chantal Shand,
Robin Smith
Abstract:
Diagnostics are critical on the path to commercial fusion reactors, since measurements and characterisation of the plasma is important for sustaining fusion reactions. Gamma spectroscopy is commonly used to provide information about the neutron energy spectrum from activation analysis, which can be used to calculate the neutron flux and fusion power. The detection limits for measuring nuclear dosi…
▽ More
Diagnostics are critical on the path to commercial fusion reactors, since measurements and characterisation of the plasma is important for sustaining fusion reactions. Gamma spectroscopy is commonly used to provide information about the neutron energy spectrum from activation analysis, which can be used to calculate the neutron flux and fusion power. The detection limits for measuring nuclear dosimetry reactions used in such diagnostics are fundamentally related to Compton scattering events making up a background continuum in measured spectra. This background lies in the same energy region as peaks from low-energy gamma rays, leading to detection and characterisation limitations. This paper presents a digital machine learning Compton suppression algorithm (MLCSA), that uses state-of-the-art machine learning techniques to perform pulse shape discrimination (PSD) for high purity germanium (HPGe) detectors. The MLCSA identifies key features of individual pulses to differentiate between those that are generated from photopeaks and Compton scatter events. Compton events are then rejected, reducing the low energy background. This novel suppression algorithm improves gamma spectroscopy results by lowering minimum detectable activity (MDA) limits and thus reducing the measurement time required to reach the desired detection limit. In this paper, the performance of the MLCSA is demonstrated using an HPGe detector, with a gamma spectrum containing americium-241 (Am-241) and cobalt-60 (Co-60). The MDA of Am-241 improved by 51% and the signal to noise ratio (SNR) improved by 49%, while the Co-60 peaks were partially preserved (reduced by 78%). The MLCSA requires no modelling of the specific detector and so has the potential to be detector agnostic, meaning the technique could be applied to a variety of detector types and applications.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Data-driven analysis of annual rain distributions
Authors:
Yosef Ashkenazy,
Naftali R. Smith
Abstract:
Rainfall is an important component of the climate system and its statistical properties are vital for prediction purposes. In this study, we have developed a statistical method for constructing the distribution of annual precipitation. The method is based on the convolution of the measured monthly rainfall distributions and does not depend on any presumed annual rainfall distribution. Using a simp…
▽ More
Rainfall is an important component of the climate system and its statistical properties are vital for prediction purposes. In this study, we have developed a statistical method for constructing the distribution of annual precipitation. The method is based on the convolution of the measured monthly rainfall distributions and does not depend on any presumed annual rainfall distribution. Using a simple statistical model, we demonstrate that our approach allows for a better prediction of extremely dry or wet years with a recurrence time several times longer than the original time series. The method that has been proposed can be utilized for other climate variables as well.
△ Less
Submitted 22 May, 2024; v1 submitted 6 December, 2023;
originally announced December 2023.
-
Optimal finite-differences discretization for the diffusion equation from the perspective of large-deviation theory
Authors:
Naftali R. Smith
Abstract:
When applying the finite-differences method to numerically solve the one-dimensional diffusion equation, one must choose discretization steps $Δx$, $Δt$ in space and time, respectively. By applying large-deviation theory on the discretized dynamics, we analyze the numerical errors due to the discretization, and find that the (relative) errors are especially large in regions of space where the conc…
▽ More
When applying the finite-differences method to numerically solve the one-dimensional diffusion equation, one must choose discretization steps $Δx$, $Δt$ in space and time, respectively. By applying large-deviation theory on the discretized dynamics, we analyze the numerical errors due to the discretization, and find that the (relative) errors are especially large in regions of space where the concentration of particles is very small. We find that the choice $Δt = {Δx}^2 / (6D)$, where $D$ is the diffusion coefficient, gives optimal accuracy compared to any other choice (including, in particular, the limit $Δt \to 0$), thus reproducing the known result that may be obtained using truncation error analysis. In addition, we give quantitative estimates for the dynamical lengthscale that describes the size of the spatial region in which the numerical solution is accurate, and study its dependence on the discretization parameters. We then turn to study the advection-diffusion equation, and obtain explicit expressions for the optimal $Δt$ and other parameters of the finite-differences scheme, in terms of $Δx$, $D$ and the advection velocity. We apply these results to study large deviations of the area swept by a diffusing particle in one dimension, trapped by an external potential $\sim |x|$. We extend our analysis to higher dimensions by combining our results from the one dimensional case with the locally one-dimension method.
△ Less
Submitted 8 April, 2024; v1 submitted 30 November, 2023;
originally announced November 2023.
-
Exact first-order effect of interactions on the ground-state energy of harmonically-confined fermions
Authors:
Pierre Le Doussal,
Naftali R. Smith,
Nathan Argaman
Abstract:
We consider a system of $N$ spinless fermions, interacting with each other via a power-law interaction $ε/r^n$, and trapped in an external harmonic potential $V(r) = r^2/2$, in $d=1,2,3$ dimensions. For any $0 < n < d+2$, we obtain the ground-state energy $E_N$ of the system perturbatively in $ε$, $E_{N}=E_{N}^{\left(0\right)}+εE_{N}^{\left(1\right)}+O\left(ε^{2}\right)$. We calculate…
▽ More
We consider a system of $N$ spinless fermions, interacting with each other via a power-law interaction $ε/r^n$, and trapped in an external harmonic potential $V(r) = r^2/2$, in $d=1,2,3$ dimensions. For any $0 < n < d+2$, we obtain the ground-state energy $E_N$ of the system perturbatively in $ε$, $E_{N}=E_{N}^{\left(0\right)}+εE_{N}^{\left(1\right)}+O\left(ε^{2}\right)$. We calculate $E_{N}^{\left(1\right)}$ exactly, assuming that $N$ is such that the "outer shell" is filled. For the case of $n=1$ (corresponding to a Coulomb interaction for $d=3$), we extract the $N \gg 1$ behavior of $E_{N}^{\left(1\right)}$, focusing on the corrections to the exchange term with respect to the leading-order term that is predicted from the local density approximation applied to the Thomas-Fermi approximate density distribution. The leading correction contains a logarithmic divergence, and is of particular importance in the context of density functional theory. We also study the effect of the interactions on the fermions' spatial density. Finally, we find that our result for $E_{N}^{\left(1\right)}$ significantly simplifies in the case where $n$ is even.
△ Less
Submitted 18 April, 2024; v1 submitted 15 November, 2023;
originally announced November 2023.
-
Data downloaded via parachute from a NASA super-pressure balloon
Authors:
Ellen L. Sirks,
Richard Massey,
Ajay S. Gill,
Jason Anderson,
Steven J. Benton,
Anthony M. Brown,
Paul Clark,
Joshua English,
Spencer W. Everett,
Aurelien A. Fraisse,
Hugo Franco,
John W. Hartley,
David Harvey,
Bradley Holder,
Andrew Hunter,
Eric M. Huff,
Andrew Hynous,
Mathilde Jauzac,
William C. Jones,
Nikky Joyce,
Duncan Kennedy,
David Lagattuta,
Jason S. -Y. Leung,
Lun Li,
Stephen Lishman
, et al. (18 additional authors not shown)
Abstract:
In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) cap…
▽ More
In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) capsules containing 5 TB solid state data storage, plus a GNSS receiver, Iridium transmitter, and parachute. Data from the telescope were copied to these, and two were dropped over Argentina. They drifted 61 km horizontally while they descended 32 km, but we predicted their descent vectors within 2.4 km: in this location, the discrepancy appears irreducible below 2 km because of high speed, gusty winds and local topography. The capsules then reported their own locations to within a few metres. We recovered the capsules and successfully retrieved all of superBIT's data - despite the telescope itself being later destroyed on landing.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Long nanomechanical resonators with circular cross-section
Authors:
Samuli Autti,
Andrew Casey,
Marie Connelly,
Neda Darvishi,
Paolo Franchini,
James Gorman,
Richard P. Haley,
Petri J. Heikkinen,
Ashlea Kemp,
Elizabeth Leason,
John March-Russell,
Jocelyn Monroe,
Theo Noble,
George R. Pickett,
Jonathan R. Prance,
Xavier Rojas,
Tineke Salmon,
John Saunders,
Jack Slater,
Robert Smith,
Michael D. Thompson,
Stephen M. West,
Luke Whitehead,
Vladislav V. Zavjalov,
Kuang Zhang
, et al. (1 additional authors not shown)
Abstract:
Fabrication of superconducting nanomechanical resonators for quantum research, detectors and devices traditionally relies on a lithographic process, resulting in oscillators with sharp edges and a suspended length limited to a few 100 micrometres. We report a low-investment top-down approach to fabricating NbTi nanowire resonators with suspended lengths up to several millimetres and diameters down…
▽ More
Fabrication of superconducting nanomechanical resonators for quantum research, detectors and devices traditionally relies on a lithographic process, resulting in oscillators with sharp edges and a suspended length limited to a few 100 micrometres. We report a low-investment top-down approach to fabricating NbTi nanowire resonators with suspended lengths up to several millimetres and diameters down to 100 nanometres. The nanowires possess high critical currents and fields, making them a natural choice for magnetomotive actuation and sensing. This fabrication technique is independent of the substrate material, dimensions and layout and can readily be adapted to fabricate nanowire resonators from any metal or alloy with suitable ductility and yield strength. Our work thus opens access to a new class of nanomechanical devices with applications including microscopic and mesoscopic investigations of quantum fluids, detecting dark matter and fundamental materials research in one-dimensional superconductors in vacuum.
△ Less
Submitted 4 November, 2023;
originally announced November 2023.
-
Reverse Engineering the Reproduction Number: A Framework for Data-Driven Counterfactual Analysis, Strategy Evaluation, and Feedback Control of Epidemics
Authors:
Baike She,
Rebecca Lee Smith,
Ian Pytlarz,
Shreyas Sundaram,
Philip E. Paré
Abstract:
During the COVID-19 pandemic, different countries, regions, and communities constructed various epidemic models to evaluate spreading behaviors and assist in making mitigation policies. Model uncertainties, introduced by complex transmission behaviors, contact-tracing networks, time-varying spreading parameters, and human factors, as well as insufficient data, have posed arduous challenges for mod…
▽ More
During the COVID-19 pandemic, different countries, regions, and communities constructed various epidemic models to evaluate spreading behaviors and assist in making mitigation policies. Model uncertainties, introduced by complex transmission behaviors, contact-tracing networks, time-varying spreading parameters, and human factors, as well as insufficient data, have posed arduous challenges for model-based approaches. To address these challenges, we propose a novel framework for data-driven counterfactual analysis, strategy evaluation, and feedback control of epidemics, which leverages statistical information from epidemic testing data instead of constructing a specific model. Through reverse engineering the reproduction number by quantifying the impact of the intervention strategy, this framework tackles three primary problems: 1) How severe would an outbreak have been without the implemented intervention strategies? 2) What impact would varying the intervention strength have had on an outbreak? 3) How can we adjust the intervention intensity based on the current state of an outbreak? Specifically, we consider the epidemic intervention policies such as the testing-for-isolation strategy as an example, which was successfully implemented by the University of Illinois Urbana-Champaign (UIUC) and Purdue University (Purdue) during the COVID-19 pandemic. By leveraging data collected by UIUC and Purdue, we validate the effectiveness of the proposed data-driven framework.
△ Less
Submitted 31 October, 2023;
originally announced November 2023.
-
Life and Death of a Thin Liquid Film
Authors:
Muhammad Rizwanur Rahman,
Li Shen,
James P. Ewen,
D. M. Heyes,
Daniele Dini,
E. R. Smith
Abstract:
Thin films, bubbles and membranes are central to numerous natural and engineering processes, i.e., in thin-film solar cells, coatings, biosensors, electrowetting displays, foams, and emulsions. Yet, the characterization and an adequate understanding of their rupture is limited by the scarcity of atomic detail. We present here the complete life-cycle of freely suspended films using non-equilibrium…
▽ More
Thin films, bubbles and membranes are central to numerous natural and engineering processes, i.e., in thin-film solar cells, coatings, biosensors, electrowetting displays, foams, and emulsions. Yet, the characterization and an adequate understanding of their rupture is limited by the scarcity of atomic detail. We present here the complete life-cycle of freely suspended films using non-equilibrium molecular dynamics simulations of a simple atomic fluid free of surfactants and surface impurities, thus isolating the fundamental rupture mechanisms. Counter to the conventional notion that rupture occurs randomly, we discovered a short-term 'memory' by rewinding in time from a rupture event, extracting deterministic behaviors from apparent stochasticity. A comprehensive investigation of the key rupture-stages including both unrestrained and frustrated propagation is made - characterization of the latter leads to a first-order correction to the classical film-retraction theory. Furthermore, the highly resolved time window reveals that the different modes of the morphological development, typically characterized as heterogeneous nucleation and spinodal decomposition, continuously evolve seamlessly with time from one into the other.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Differentiable Vertex Fitting for Jet Flavour Tagging
Authors:
Rachel E. C. Smith,
Inês Ochoa,
Rúben Inácio,
Jonathan Shoemaker,
Michael Kagan
Abstract:
We propose a differentiable vertex fitting algorithm that can be used for secondary vertex fitting, and that can be seamlessly integrated into neural networks for jet flavour tagging. Vertex fitting is formulated as an optimization problem where gradients of the optimized solution vertex are defined through implicit differentiation and can be passed to upstream or downstream neural network compone…
▽ More
We propose a differentiable vertex fitting algorithm that can be used for secondary vertex fitting, and that can be seamlessly integrated into neural networks for jet flavour tagging. Vertex fitting is formulated as an optimization problem where gradients of the optimized solution vertex are defined through implicit differentiation and can be passed to upstream or downstream neural network components for network training. More broadly, this is an application of differentiable programming to integrate physics knowledge into neural network models in high energy physics. We demonstrate how differentiable secondary vertex fitting can be integrated into larger transformer-based models for flavour tagging and improve heavy flavour jet classification.
△ Less
Submitted 19 October, 2023;
originally announced October 2023.
-
Host-feeding preferences and temperature shape the dynamics of West Nile virus: a mathematical model of assessing the abatement planning
Authors:
Suman Bhowmick,
Megan Fritz,
Rebecca Lee Smith
Abstract:
West Nile virus (WNV) is prevalent in the United States but it shows considerable divergence in transmission patterns and spatio-temporal intensity.It is to be noted that the mechanism that drives the transmission potential of WNV is described by the abilities of host species to maintain and disseminate the pathogens pertinent with different eco-epidemiological factors that have an influence on th…
▽ More
West Nile virus (WNV) is prevalent in the United States but it shows considerable divergence in transmission patterns and spatio-temporal intensity.It is to be noted that the mechanism that drives the transmission potential of WNV is described by the abilities of host species to maintain and disseminate the pathogens pertinent with different eco-epidemiological factors that have an influence on the contact rates amongst the interacting species.There is growing evidence that several vectors exhibit strong feeding preferences towards different host communities.We construct a process based weather driven ordinary differential equation (ODE) model to understand the impact of one vector species Culex pipiens, preferred avian and non-preferred human hosts and compared it surveillance data for the Culex pipiens complex collected in Cook County, Illinois, USA.In our mechanistic model, we also demonstrate that adulticide treatments produced significant reductions in the Culex pipiens population.We take into account the feeding index that can be described as the ratio between observed frequency of mosquitoes feeding on one host compared to another host, divided by the expected frequency of mosquitoes feeding on these two hosts based on the presence of the particular hosts to develop this transmission model for WNV. Our findings demonstrate that the interplay between the feeding index and mosquito abatement strategy is rather a complex phenomenon and it induces a heterogeneous contact rates that should be included while modelling multi-host, multi-vector transmission model.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
A flexible and efficient approach for missing transverse momentum reconstruction
Authors:
William Balunas,
Donatella Cavalli,
Teng Jian Khoo,
Matthew Klein,
Peter Loch,
Federica Piazza,
Caterina Pizio,
Silvia Resconi,
Douglas Schaefer,
Russell Smith,
Sarah Williams
Abstract:
Missing transverse momentum is a crucial observable for physics at hadron colliders, being the only constraint on the kinematics of "invisible" objects such as neutrinos and hypothetical dark matter particles. Computing missing transverse momentum at the highest possible precision, particularly in experiments at the energy frontier, can be a challenging procedure due to ambiguities in the distribu…
▽ More
Missing transverse momentum is a crucial observable for physics at hadron colliders, being the only constraint on the kinematics of "invisible" objects such as neutrinos and hypothetical dark matter particles. Computing missing transverse momentum at the highest possible precision, particularly in experiments at the energy frontier, can be a challenging procedure due to ambiguities in the distribution of energy and momentum between many reconstructed particle candidates. This paper describes a novel solution for efficiently encoding information required for the computation of missing transverse momentum given arbitrary selection criteria for the constituent reconstructed objects. Pileup suppression using information from both the calorimeter and the inner detector is an integral component of the reconstruction procedure. Energy calibration and systematic variations are naturally supported. Following this strategy, the ATLAS Collaboration has been able to optimise the use of missing transverse momentum in diverse analyses throughout Runs 2 and 3 of the Large Hadron Collider and for future analyses.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
NEMA NU 2-2018 performance evaluation of a new generation digital 32-cm axial field-of-view Omni Legend PET-CT
Authors:
Rhodri Lyn Smith,
Lee Bartley,
Christopher O'Callaghan,
Kevin M. Bradley,
Chris Marshall
Abstract:
A NEMA performance evaluation was conducted on the new General Electric (GE) digital Omni Legend PET-CT system with 32-cm extended field-of-view. This study marks the introduction of the first-ever commercially available clinical digital bismuth germanate technology. Testing was performed in accordance with the NEMA NU2-2018 standard. A comparison was made with the performance of two other commerc…
▽ More
A NEMA performance evaluation was conducted on the new General Electric (GE) digital Omni Legend PET-CT system with 32-cm extended field-of-view. This study marks the introduction of the first-ever commercially available clinical digital bismuth germanate technology. Testing was performed in accordance with the NEMA NU2-2018 standard. A comparison was made with the performance of two other commercial GE scanners with extended fields-of-view. A digital lutetium yttrium orthosilicate system (Discovery MI - 6 ring) and a non-digital bismuth germanate system (Discovery IQ). For the Omni assessment, the tangential, radial, and axial spatial resolutions at 1 cm radial offset were measured as 3.76 mm, 3.73 mm, and 4.25 mm FWHM. The total system sensitivity to a line source at the center was 44.36 cps/kBq. The peak NECR was 501 kcps at 17.8 kBq/mL. The scatter fraction at NECR peak was 35.48%, and the maximum count-rate error at and below NEC peak was 5.5%. Sphere contrast recovery coefficients were from 52% (10 mm) to 93% (37 mm). The system does not use time of flight; thus, no assessment of timing resolution was made. The PET-CT co-registration accuracy was 2.4 mm. The performance of the Omni Legend surpassed that of the Discovery MI on all NEMA tests, except for assessments of background variability (image noise). Time of flight is associated with inherent improvements in signal-to-noise ratio. In lieu of time of flight capabilities, the Omni provides software corrections in the form of a pre-trained neural network (trained on non-ToF to ToF). With such corrections, average performance is competitive when compared to ToF systems. Further validation is required to optimize clinical imaging protocols and hyperparameters associated with such software corrections and to examine the effect of non-linear corrections with varying target size, particularly for real world, clinical scans.
△ Less
Submitted 11 August, 2023;
originally announced August 2023.
-
Multiscale Simulation of Fluids: Coupling Molecular and Continuum
Authors:
Edward R. Smith,
Panagiotis E. Theodorakis
Abstract:
Computer simulation is an important tool for scientific progress, especially when lab experiments are either extremely costly and difficult or lack the required resolution. However, all of the simulation methods come with limitations. In molecular dynamics (MD) simulation, the length and time scales that can be captured are limited, while computational fluid dynamics (CFD) methods are built on a r…
▽ More
Computer simulation is an important tool for scientific progress, especially when lab experiments are either extremely costly and difficult or lack the required resolution. However, all of the simulation methods come with limitations. In molecular dynamics (MD) simulation, the length and time scales that can be captured are limited, while computational fluid dynamics (CFD) methods are built on a range of assumptions, from the continuum hypothesis itself, to a variety of closure assumptions. To address these issues, the coupling of different methodologies provides a way to retain the best of both methods. Here, we provide a perspective on multiscale simulation based on the coupling of MD and CFD with each a distinct part of the simulation domain. This style of coupling allows molecular detail to be present only where it is needed, so CFD can model larger scales than possible with MD alone. We present a unified perspective of the literature, showing the links between state and flux coupling and discuss the various assumptions required for both. A unique challenge in such coupled simulation is obtaining averages and constraining local parts of a molecular simulation. We highlight that incorrect localisation has resulted in an error in the literature for both pressure tensor and coupling constraints. We then finish with some applications, focused on the simulation of fluids. Thus, we hope to motivate further research in this exciting area with applications across the spectrum of scientific disciplines.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
Applying Machine Learning Methods to Laser Acceleration of Protons: Lessons Learned from Synthetic Data
Authors:
Ronak Desai,
Thomas Zhang,
Ricky Oropeza,
John J. Felice,
Joseph R. Smith,
Alona Kryshchenko,
Chris Orban,
Michael L. Dexter,
Anil K. Patnaik
Abstract:
Researchers in the field of ultra-intense laser science are beginning to embrace machine learning methods. In this study we consider three different machine learning methods -- a two-hidden layer neural network, Support Vector Regression and Gaussian Process Regression -- and compare how well they can learn from a synthetic data set for proton acceleration in the Target Normal Sheath Acceleration…
▽ More
Researchers in the field of ultra-intense laser science are beginning to embrace machine learning methods. In this study we consider three different machine learning methods -- a two-hidden layer neural network, Support Vector Regression and Gaussian Process Regression -- and compare how well they can learn from a synthetic data set for proton acceleration in the Target Normal Sheath Acceleration regime. The synthetic data set was generated from a previously published theoretical model by Fuchs et al. 2005 that we modified. Once trained, these machine learning methods can assist with efforts to maximize the peak proton energy, or with the more general problem of configuring the laser system to produce a proton energy spectrum with desired characteristics. In our study we focus on both the accuracy of the machine learning methods and the performance on one GPU including the memory consumption. Although it is arguably the least sophisticated machine learning model we considered, Support Vector Regression performed very well in our tests.
△ Less
Submitted 16 April, 2024; v1 submitted 29 July, 2023;
originally announced July 2023.
-
Applying Superfluid Helium to Light Dark Matter Searches: Demonstration of the HeRALD Detector Concept
Authors:
R. Anthony-Petersen,
A. Biekert,
C. L. Chang,
Y. Chang,
L. Chaplinsky,
A. Dushkin,
C. W. Fink,
M. Garcia-Sciveres,
W. Guo,
S. A. Hertel,
X. Li,
J. Lin,
R. Mahapatra,
W. Matava,
D. N. McKinsey,
D. Z. Osterman,
P. K. Patel,
B. Penning,
H. D. Pinckney,
M. Platt,
M. Pyle,
Y. Qi,
M. Reed,
G. R. C Rischbieter,
R. K. Romani
, et al. (11 additional authors not shown)
Abstract:
The SPICE/HeRALD collaboration is performing R&D to enable studies of sub-GeV dark matter models using a variety of target materials. Here we report our recent progress on instrumenting a superfluid $^4$He target mass with a transition-edge sensor based calorimeter to detect both atomic signals (e.g. scintillation) and $^4$He quasiparticle (phonon and roton) excitations. The sensitivity of HeRALD…
▽ More
The SPICE/HeRALD collaboration is performing R&D to enable studies of sub-GeV dark matter models using a variety of target materials. Here we report our recent progress on instrumenting a superfluid $^4$He target mass with a transition-edge sensor based calorimeter to detect both atomic signals (e.g. scintillation) and $^4$He quasiparticle (phonon and roton) excitations. The sensitivity of HeRALD to the critical "quantum evaporation" signal from $^4$He quasiparticles requires us to block the superfluid film flow to the calorimeter. We have developed a heat-free film-blocking method employing an unoxidized Cs film, which we implemented in a prototype "HeRALD v0.1" detector of $\sim$10~g target mass. This article reports initial studies of the atomic and quasiparticle signal channels. A key result of this work is the measurement of the quantum evaporation channel's gain of $0.15 \pm 0.012$, which will enable $^4$He-based dark matter experiments in the near term. With this gain the HeRALD detector reported here has an energy threshold of 145~eV at 5 sigma, which would be sensitive to dark matter masses down to 220~MeV/c$^2$.
△ Less
Submitted 21 July, 2023;
originally announced July 2023.
-
Radiative cooling effects on reverse shocks formed by magnetised supersonic plasma flows
Authors:
S. Merlini,
J. D. Hare,
G. C. Burdiak,
J. W. D. Halliday,
A. Ciardi,
J. P. Chittenden,
T. Clayson,
A. J. Crilly,
S. J. Eardley,
K. E. Marrow,
D. R. Russell,
R. A. Smith,
N. Stuart,
L. G. Suttle,
E. R. Tubman,
V. Valenzuela-Villaseca,
T. W. O. Varnish,
S. V. Lebedev
Abstract:
We study the structure of reverse shocks formed by the collision of supersonic, magnetised plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminium wire arrays, the shock is sharp and well…
▽ More
We study the structure of reverse shocks formed by the collision of supersonic, magnetised plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminium wire arrays, the shock is sharp and well defined, consistent with magneto-hydrodynamic theory. In contrast, we do not observe a well-defined shock using tungsten wires, instead, we see a broad region dominated by density fluctuations on a wide range of spatial scales. We diagnose these two very different interactions using interferometry, Thomson scattering, shadowgraphy, and a newly developed imaging refractometer which is sensitive to small deflections of the probing laser corresponding to small-scale density perturbations. We conclude that the differences in shock structure are most likely due to radiative cooling instabilities which create small-scale density perturbations elongated along magnetic field lines in the tungsten plasma. These instabilities grow more slowly and are smoothed by thermal conduction in the aluminium plasma.
△ Less
Submitted 7 August, 2023; v1 submitted 2 June, 2023;
originally announced June 2023.
-
Cavity Click Chemistry: Cavity-Catalyzed Azide-Alkyne Cycloaddition
Authors:
Fabijan Pavosevic,
Robert L. Smith,
Angel Rubio
Abstract:
Click chemistry, which refers to chemical reactions that are fast, selective, and with high product yields, has become a powerful approach in organic synthesis and chemical biology. Due to the cytotoxicity of the transition metals employed in click chemistry reactions, a search for novel metal-free alternatives continues. Herein we demonstrate that an optical cavity can be utilized as a metal-free…
▽ More
Click chemistry, which refers to chemical reactions that are fast, selective, and with high product yields, has become a powerful approach in organic synthesis and chemical biology. Due to the cytotoxicity of the transition metals employed in click chemistry reactions, a search for novel metal-free alternatives continues. Herein we demonstrate that an optical cavity can be utilized as a metal-free alternative in click chemistry cycloaddition reaction between cyanoacetylene and formylazide using the quantum electrodynamics coupled cluster (QED-CC) method. We show that by changing the molecular orientation with respect to the polarization of the cavity mode(s), the reaction can be selectively catalyzed to form a major 1,4-disubstituted or 1,5-disubstituted product. This work highlights that a cavity has the same effect on the investigated cycloaddition as the transition metal catalysts traditionally employed in click chemistry reactions. We expect our findings to further stimulate research in cavity-assisted click chemistry reactions.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Phosphorus-Controlled Nanoepitaxy in the Asymmetric Growth of GaAs-InP Core-Shell Bent Nanowires
Authors:
Spencer McDermott,
Trevor R. Smith,
Ray R. LaPierre,
Ryan B. Lewis
Abstract:
Breakthroughs extending nanostructure engineering beyond what is possible with current fabrication techniques will be crucial for enabling next-generation nanotechnologies. Nanoepitaxy of strain-engineered bent nanowire heterostructures presents a promising platform for realizing bottom-up and scalable fabrication of nanowire devices. The synthesis of these structures requires the selective asymme…
▽ More
Breakthroughs extending nanostructure engineering beyond what is possible with current fabrication techniques will be crucial for enabling next-generation nanotechnologies. Nanoepitaxy of strain-engineered bent nanowire heterostructures presents a promising platform for realizing bottom-up and scalable fabrication of nanowire devices. The synthesis of these structures requires the selective asymmetric deposition of lattice-mismatched shells-a complex growth process which is not well understood. We present the nanoepitaxial growth of GaAs-InP core-shell bent nanowires and connecting nanowire pairs to form nano-arches. Compositional analysis of nanowire cross-sections reveals the critical role of adatom diffusion in the nanoepitaxial growth process, which leads to two distinct growth regimes: indium-diffusion limited growth and phosphorous-limited growth. The highly controllable phosphorous-limited growth mode is employed to synthesize connected nanowire pairs and quantify the role of flux shadowing on the shell growth process. These results provide important insight into three-dimensional nanoepitaxy and enable new possibilities for nanowire device fabrication.
△ Less
Submitted 14 May, 2023; v1 submitted 12 May, 2023;
originally announced May 2023.
-
The Qweak High Performance LH2 Target
Authors:
J. Brock,
S. Covrig Dusa,
J. Dunne,
C. Keith,
D. Meekins,
J. Pierce,
G. R. Smith,
A. Subedi
Abstract:
A high-power liquid hydrogen target was built for the Jefferson Lab Qweak experiment, which measured the tiny parity-violating asymmetry in $\vec{e}$p scattering at an incident energy of 1.16 GeV, and a Q$^2 = 0.025$ GeV$^{2}$. To achieve the luminosity of $1.7 \times 10^{39}$ cm$^{-2}$ s$^{-1}$, a 34.5 cm-long target was used with a beam current of 180 $μ$A. The ionization energy-loss deposited b…
▽ More
A high-power liquid hydrogen target was built for the Jefferson Lab Qweak experiment, which measured the tiny parity-violating asymmetry in $\vec{e}$p scattering at an incident energy of 1.16 GeV, and a Q$^2 = 0.025$ GeV$^{2}$. To achieve the luminosity of $1.7 \times 10^{39}$ cm$^{-2}$ s$^{-1}$, a 34.5 cm-long target was used with a beam current of 180 $μ$A. The ionization energy-loss deposited by the beam in the target was 2.1 kW. The target temperature was controlled to within $\pm$0.02 K and the target noise (density fluctuations) near the experiment's beam helicity-reversal rate of 960 Hz was only 53 ppm. The 58 liquid liter target achieved a head of 11.4 m (7.6 kPa) and a mass flow of 1.2 $\pm$ 0.3 kg/s (corresponding to a volume flow of 17.4 $\pm$ 3.8 l/s) at the nominal 29 Hz rotation frequency of the recirculating centrifugal pump. We describe aspects of the design, operation, and performance of this target, the highest power LH2 target ever used in an electron scattering experiment to date.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
A portable and high intensity 24 keV neutron source based on $^{124}$Sb-$^{9}$Be photoneutrons and an iron filter
Authors:
A. Biekert,
C. Chang,
L. Chaplinsky,
C. W. Fink,
W. D. Frey,
M. Garcia-Sciveres,
W. Guo,
S. A. Hertel,
X. Li,
J. Lin,
M. Lisovenko,
R. Mahapatra,
D. N. McKinsey,
S. Mehrotra,
N. Mirabolfathi,
P. K. Patel,
B. Penning,
H. D. Pinckney,
M. Reed,
R. K. Romani,
B. Sadoulet,
R. J. Smith,
P. Sorensen,
B. Suerfu,
A. Suzuki
, et al. (5 additional authors not shown)
Abstract:
A portable monoenergetic 24 keV neutron source based on the $^{124}$Sb-$^9$Be photoneutron reaction and an iron filter has been constructed and characterized. The coincidence of the neutron energy from SbBe and the low interaction cross-section with iron (mean free path up to 29 cm) makes pure iron specially suited to shield against gamma rays from $^{124}$Sb decays while letting through the neutr…
▽ More
A portable monoenergetic 24 keV neutron source based on the $^{124}$Sb-$^9$Be photoneutron reaction and an iron filter has been constructed and characterized. The coincidence of the neutron energy from SbBe and the low interaction cross-section with iron (mean free path up to 29 cm) makes pure iron specially suited to shield against gamma rays from $^{124}$Sb decays while letting through the neutrons. To increase the $^{124}$Sb activity and thus the neutron flux, a $>$1 GBq $^{124}$Sb source was produced by irradiating a natural Sb metal pellet with a high flux of thermal neutrons in a nuclear reactor. The design of the source shielding structure makes for easy transportation and deployment. A hydrogen gas proportional counter is used to characterize the neutrons emitted by the source and a NaI detector is used for gamma background characterization. At the exit opening of the neutron beam, the characterization determined the neutron flux in the energy range 20-25 keV to be 5.36$\pm$0.20 neutrons per cm$^2$ per second and the total gamma flux to be 213$\pm$6 gammas per cm$^2$ per second (numbers scaled to 1 GBq activity of the $^{124}$Sb source). A liquid scintillator detector is demonstrated to be sensitive to neutrons with incident kinetic energies from 8 to 17 keV, so it can be paired with the source as a backing detector for neutron scattering calibration experiments. This photoneutron source provides a good tool for in-situ low energy nuclear recoil calibration for dark matter experiments and coherent elastic neutrino-nucleus scattering experiments.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Automatic Identification of Edge Localized Modes in the DIII-D Tokamak
Authors:
Finn H. O'Shea,
Semin Joung,
David R. Smith,
Ryan Coffee
Abstract:
Fusion power production in tokamaks uses discharge configurations that risk producing strong Type I Edge Localized Modes. The largest of these modes will likely increase impurities in the plasma and potentially damage plasma facing components such as the protective heat and waste divertor. Machine learning-based prediction and control may provide for online mitigation of these damaging modes befor…
▽ More
Fusion power production in tokamaks uses discharge configurations that risk producing strong Type I Edge Localized Modes. The largest of these modes will likely increase impurities in the plasma and potentially damage plasma facing components such as the protective heat and waste divertor. Machine learning-based prediction and control may provide for online mitigation of these damaging modes before they grow too large to suppress. To that end, large labeled datasets are required for supervised training of machine learning models. We present an algorithm that achieves 97.7% precision when automatically labeling Edge Localized Modes in the large DIII-D tokamak discharge database. The algorithm has no user controlled parameters and is largely robust to tokamak and plasma configuration changes. This automatically-labeled database of events can subsequently feed future training of machine learning models aimed at autonomous Edge Localized Mode control and suppression.
△ Less
Submitted 16 December, 2022;
originally announced December 2022.
-
Universal equation of state for wave turbulence in a quantum gas
Authors:
Lena H. Dogra,
Gevorg Martirosyan,
Timon A. Hilker,
Jake A. P. Glidden,
Jiří Etrych,
Alec Cao,
Christoph Eigen,
Robert P. Smith,
Zoran Hadzibabic
Abstract:
Boyle's 1662 observation that the volume of a gas is, at constant temperature, inversely proportional to pressure, offered a prototypical example of how an equation of state (EoS) can succinctly capture key properties of a many-particle system. Such relations are now cornerstones of equilibrium thermodynamics. Extending thermodynamic concepts to far-from-equilibrium systems is of great interest in…
▽ More
Boyle's 1662 observation that the volume of a gas is, at constant temperature, inversely proportional to pressure, offered a prototypical example of how an equation of state (EoS) can succinctly capture key properties of a many-particle system. Such relations are now cornerstones of equilibrium thermodynamics. Extending thermodynamic concepts to far-from-equilibrium systems is of great interest in various contexts including glasses, active matter, and turbulence, but is in general an open problem. Here, using a homogeneous ultracold atomic Bose gas, we experimentally construct an EoS for a turbulent cascade of matter waves. Under continuous forcing at a large length scale and dissipation at a small one, the gas exhibits a non-thermal, but stationary state, which is characterised by a power-law momentum distribution sustained by a scale-invariant momentum-space energy flux. We establish the amplitude of the momentum distribution and the underlying energy flux as equilibrium-like state variables, related by an EoS that does not depend on the details of the energy injection or dissipation, or the history of the system. Moreover, we show that the equations of state for a wide range of interaction strengths and gas densities can be empirically scaled onto each other. This results in a universal dimensionless EoS that sets benchmarks for the theory and should also be relevant for other turbulent systems.
△ Less
Submitted 5 May, 2023; v1 submitted 16 December, 2022;
originally announced December 2022.
-
Background Determination for the LUX-ZEPLIN (LZ) Dark Matter Experiment
Authors:
J. Aalbers,
D. S. Akerib,
A. K. Al Musalhi,
F. Alder,
S. K. Alsum,
C. S. Amarasinghe,
A. Ames,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
J. E. Armstrong,
M. Arthurs,
A. Baker,
J. Bang,
J. W. Bargemann,
A. Baxter,
K. Beattie,
P. Beltrame,
E. P. Bernard,
A. Bhatti,
A. Biekert,
T. P. Biesiadzinski,
H. J. Birch,
G. M. Blockinger,
B. Boxer
, et al. (178 additional authors not shown)
Abstract:
The LUX-ZEPLIN experiment recently reported limits on WIMP-nucleus interactions from its initial science run, down to $9.2\times10^{-48}$ cm$^2$ for the spin-independent interaction of a 36 GeV/c$^2$ WIMP at 90% confidence level. In this paper, we present a comprehensive analysis of the backgrounds important for this result and for other upcoming physics analyses, including neutrinoless double-bet…
▽ More
The LUX-ZEPLIN experiment recently reported limits on WIMP-nucleus interactions from its initial science run, down to $9.2\times10^{-48}$ cm$^2$ for the spin-independent interaction of a 36 GeV/c$^2$ WIMP at 90% confidence level. In this paper, we present a comprehensive analysis of the backgrounds important for this result and for other upcoming physics analyses, including neutrinoless double-beta decay searches and effective field theory interpretations of LUX-ZEPLIN data. We confirm that the in-situ determinations of bulk and fixed radioactive backgrounds are consistent with expectations from the ex-situ assays. The observed background rate after WIMP search criteria were applied was $(6.3\pm0.5)\times10^{-5}$ events/keV$_{ee}$/kg/day in the low-energy region, approximately 60 times lower than the equivalent rate reported by the LUX experiment.
△ Less
Submitted 17 July, 2023; v1 submitted 30 November, 2022;
originally announced November 2022.
-
Thin Film Rupture from the Atomic Scale
Authors:
Muhammad Rizwanur Rahman,
Li Shen,
James P. Ewen,
Benjamin Collard,
D. M. Heyes,
Daniele Dini,
E. R. Smith
Abstract:
The retraction of thin films, as described by the Taylor-Culick (TC) theory, is subject to widespread debate, particularly for films at the nanoscale. We use non-equilibrium molecular dynamics simulations to explore the validity of the assumptions used in continuum models, by tracking the evolution of holes in a film. By deriving a new mathematical form for the surface shape and considering a loca…
▽ More
The retraction of thin films, as described by the Taylor-Culick (TC) theory, is subject to widespread debate, particularly for films at the nanoscale. We use non-equilibrium molecular dynamics simulations to explore the validity of the assumptions used in continuum models, by tracking the evolution of holes in a film. By deriving a new mathematical form for the surface shape and considering a locally varying surface tension at the front of the retracting film, we reconcile the original theory with our simulation data to recover a corrected TC speed valid at the nanoscale.
△ Less
Submitted 12 December, 2022; v1 submitted 18 November, 2022;
originally announced November 2022.
-
High-speed processing of X-ray wavefront marking data with the Unified Modulated Pattern Analysis (UMPA) model
Authors:
Fabio De Marco,
Sara Savatović,
Ronan Smith,
Vittorio Di Trapani,
Marco Margini,
Ginevra Lautizi,
Pierre Thibault
Abstract:
Wavefront-marking X-ray imaging techniques use e.g., sandpaper or a grating to generate intensity fluctuations, and analyze their distortion by the sample in order to retrieve attenuation, phase-contrast, and dark-field information. Phase contrast yields an improved visibility of soft-tissue specimens, while dark-field reveals small-angle scatter from sub-resolution structures. Both have found man…
▽ More
Wavefront-marking X-ray imaging techniques use e.g., sandpaper or a grating to generate intensity fluctuations, and analyze their distortion by the sample in order to retrieve attenuation, phase-contrast, and dark-field information. Phase contrast yields an improved visibility of soft-tissue specimens, while dark-field reveals small-angle scatter from sub-resolution structures. Both have found many biomedical and engineering applications. The previously developed Unified Modulated Pattern Analysis (UMPA) model extracts these modalities from wavefront-marking data. We here present a new UMPA implementation, capable of rapidly processing large datasets and featuring capabilities to greatly extend the field of view. We also discuss possible artifacts and additional new features.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Imaging Scatterometer for Observing In-Situ Changes to Optical Coatings During Air Annealing
Authors:
Michael Rezac,
Daniel Martinez,
Amy Gleckl,
Joshua R. Smith
Abstract:
Annealing of amorphous optical coatings has been shown to generally reduce optical absorption, optical scattering, and mechanical loss, with higher temperature annealing giving better results. The achievable maximum temperatures are limited to the levels at which coating damage, such as crystallization, cracking, or bubbling will occur. Coating damage caused by heating is typically only observed s…
▽ More
Annealing of amorphous optical coatings has been shown to generally reduce optical absorption, optical scattering, and mechanical loss, with higher temperature annealing giving better results. The achievable maximum temperatures are limited to the levels at which coating damage, such as crystallization, cracking, or bubbling will occur. Coating damage caused by heating is typically only observed statically, after annealing. An experimental method to dynamically observe how and over what temperature range such damage occurs during annealing is desirable as its results could inform manufacturing and annealing processes to ultimately achieve better coating performance. We developed a new instrument that features an industrial annealing oven with holes cut into its sides for viewports to illuminate optical samples and observe their coating scatter and eventual damage mechanisms in-situ and in real-time during annealing. We present results that demonstrate in-situ observation of changes to titania-doped tantala coatings on fused silica substrates. We obtain a spatial image (map**) of the evolution of these changes during annealing, an advantage over x-ray diffraction, electron beam, or Raman methods. We infer, based on other experiments in the literature, these changes to be due to crystallization. We further discuss the utility of this apparatus for observing other forms of coating damage such as cracking and blisters.
△ Less
Submitted 30 November, 2022; v1 submitted 6 October, 2022;
originally announced October 2022.
-
Thermodynamic Stability of Xenon-Doped Liquid Argon Detectors
Authors:
Ethan P. Bernard,
Eli Mizrachi,
James Kingston,
**gke Xu,
Sergey V. Pereverzev,
Teal Pershing,
Ryan Smith,
Charles G. Prior,
Nathaniel S. Bowden,
Adam Bernstein,
Carter R. Hall,
Emilija Pantic,
Mani Tripathi,
Daniel N. McKinsey,
Phillip S. Barbeau
Abstract:
Liquid argon detectors are employed in a wide variety of nuclear and particle physics experiments. The addition of small quantities of xenon to argon modifies its scintillation, ionization, and electroluminescence properties and can improve its performance as a detection medium. However, a liquid argon-xenon mixture can develop instabilities, especially in systems that require phase transitions or…
▽ More
Liquid argon detectors are employed in a wide variety of nuclear and particle physics experiments. The addition of small quantities of xenon to argon modifies its scintillation, ionization, and electroluminescence properties and can improve its performance as a detection medium. However, a liquid argon-xenon mixture can develop instabilities, especially in systems that require phase transitions or that utilize high xenon concentrations. In this work, we discuss the causes for such instabilities and describe a small (liter-scale) apparatus with a unique cryogenic circuit specifically designed to handle argon-xenon mixtures. The system is capable of condensing argon gas mixed with O(1%) xenon by volume and maintains a stable liquid mixture near the xenon saturation limit while actively circulating it in the gas phase. We also demonstrate control over instabilities that develop when the detector condition is allowed to deviate from optimized settings. This progress enables future liquid argon detectors to benefit from the effects of high concentrations of xenon do**, such as more efficient detection of low-energy ionization signals. This work also develops tools to study and mitigate instabilities in large argon detectors that use low concentration xenon do**.
△ Less
Submitted 12 September, 2022;
originally announced September 2022.
-
Hollow Rectangular Waveguide-fed Holographic Beamforming Antenna Additively Manufactured (3D Printed) with Conductive Polymer
Authors:
Insang Yoo,
Jonah Gollub,
Shengrong Ye,
Allen Gray,
Okan Yurduseven,
Manohar D. Deshpande,
David R. Smith
Abstract:
We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verificatio…
▽ More
We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verification, the designed antennas are fabricated using a desktop dual-extrusion fused filament 3D printer. The body of each antenna and its inner conducting surface are respectively printed using polylactic acid and biodegradable conductive polyester composite material (i.e., Electrifi), which is later deposited with a layer of copper on its surface to improve surface conductivity and reduce surface roughness. The beamforming performance of the fabricated antennas is confirmed via experiments. The 3D printed metasurface antennas using the proposed fabrication technique illustrate emerging capabilities in the rapid prototy** of complex electromagnetic structures.
△ Less
Submitted 30 August, 2022;
originally announced August 2022.
-
An Integrated, Phase-Controlled Power Divider for Metasurface Array Antennas
Authors:
Deepayan Banerjee,
Aaron V. Diebold,
David R. Smith,
Michael Boyarsky
Abstract:
We present the design of a phased, modulated, power distribution network for metasurface array antennas. The specific metasurface array design comprises a series of waveguides, each feeding a sub-array of dynamically tunable metamaterial elements that radiate at microwave (X-band) frequencies. To remain a one-port device, the composite array requires a power divider that can excite each branch wav…
▽ More
We present the design of a phased, modulated, power distribution network for metasurface array antennas. The specific metasurface array design comprises a series of waveguides, each feeding a sub-array of dynamically tunable metamaterial elements that radiate at microwave (X-band) frequencies. To remain a one-port device, the composite array requires a power divider that can excite each branch waveguide with equal power. Further, the power divider must also apply a prescribed phase shift to each branch waveguide to mitigate metasurface-specific grating lobes. The presented design features hollow metal waveguides, with a conducting sheet patterned with metamaterial irises serving as the upper wall. A single hollow metal main waveguide feed is used to couple power to each of the branch waveguide. Carefully oriented slots control both the magnitude and phase of the field distributed from the main feed to each branch. All waveguides can be machined from a single block of metal, with a metamaterial-patterned printed circuit board laminated to the top of the assembly. The resulting design is mechanically robust and capable of high power operation while retaining the low-cost, low-power consumption, lightweight, and low-profile features common in metasurface antenna designs.
△ Less
Submitted 11 July, 2022;
originally announced August 2022.
-
Catalysis in Click Chemistry Reactions Controlled by Cavity Quantum Vacuum Fluctuations: The Case of endo/exo Diels-Alder Reaction
Authors:
Fabijan Pavošević,
Robert L. Smith,
Angel Rubio
Abstract:
Achieving control over chemical reaction's rate and stereoselectivity realizes one of the Holy Grails in chemistry that can revolutionize chemical and pharmaceutical industries. Strong light-matter interaction in optical or nanoplasmonic cavities might provide the knob to reach such control. In this work, we demonstrate the catalytic and selectivity control of an optical cavity for two selected Di…
▽ More
Achieving control over chemical reaction's rate and stereoselectivity realizes one of the Holy Grails in chemistry that can revolutionize chemical and pharmaceutical industries. Strong light-matter interaction in optical or nanoplasmonic cavities might provide the knob to reach such control. In this work, we demonstrate the catalytic and selectivity control of an optical cavity for two selected Diels-Alder cycloaddition reactions using the quantum electrodynamics coupled cluster (QED-CC) method. Herein, we find that by changing the molecular orientation with respect to the polarization of the cavity mode the reactions can be significantly inhibited or selectively enhanced to produce major endo or exo products on demand. This work highlights the potential of utilizing quantum vacuum fluctuations of an optical cavity to modulate the rate of Diels-Alder cycloaddition reactions and to achieve stereoselectivity in a practical and non-intrusive way. We expect that the present findings will be applicable to a larger set of relevant click chemical reactions under strong light-matter coupling conditions.
△ Less
Submitted 25 November, 2022; v1 submitted 14 August, 2022;
originally announced August 2022.
-
A Stress Induced Source of Phonon Bursts and Quasiparticle Poisoning
Authors:
Robin Anthony-Petersen,
Andreas Biekert,
Raymond Bunker,
Clarence L. Chang,
Yen-Yung Chang,
Luke Chaplinsky,
Eleanor Fascione,
Caleb W. Fink,
Maurice Garcia-Sciveres,
Richard Germond,
Wei Guo,
Scott A. Hertel,
Ziqing Hong,
Noah Kurinsky,
Xinran Li,
Junsong Lin,
Marharyta Lisovenko,
Rupak Mahapatra,
Adam Mayer,
Daniel McKinsey,
Siddhant Mehrotra,
Nader Mirabolfathi,
Brian Neblosky,
William A. Page,
Pratyush K. Patel
, et al. (21 additional authors not shown)
Abstract:
The performance of superconducting qubits is degraded by a poorly characterized set of energy sources breaking the Cooper pairs responsible for superconductivity, creating a condition often called "quasiparticle poisoning." Recently, a superconductor with one of the lowest average quasiparticle densities ever measured exhibited quasiparticles primarily produced in bursts which decreased in rate wi…
▽ More
The performance of superconducting qubits is degraded by a poorly characterized set of energy sources breaking the Cooper pairs responsible for superconductivity, creating a condition often called "quasiparticle poisoning." Recently, a superconductor with one of the lowest average quasiparticle densities ever measured exhibited quasiparticles primarily produced in bursts which decreased in rate with time after cooldown. Similarly, several cryogenic calorimeters used to search for dark matter have also observed an unknown source of low-energy phonon bursts that decrease in rate with time after cooldown. Here, we show that a silicon crystal glued to its holder exhibits a rate of low-energy phonon events that is more than two orders of magnitude larger than in a functionally identical crystal suspended from its holder in a low-stress state. The excess phonon event rate in the glued crystal decreases with time since cooldown, consistent with a source of phonon bursts which contributes to quasiparticle poisoning in quantum circuits and the low-energy events observed in cryogenic calorimeters. We argue that relaxation of thermally induced stress between the glue and crystal is the source of these events, and conclude that stress relaxation contributes to quasiparticle poisoning in superconducting qubits and the athermal phonon background in a broad class of rare-event searches.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
Reflectarray Design Using a Discrete Dipole Framework
Authors:
Aaron V. Diebold,
Divya Pande,
Christine Gregg,
David R. Smith
Abstract:
We propose and numerically validate a patch reflectarray modeling approach suitable for small patches that describes each patch as a pair of polarizable magnetic dipoles. We introduce an extraction technique to obtain the effective polarizability of the patch dipoles via full-wave simulations on individual patches, followed by a beamforming design routine valid under weakly scattering configuratio…
▽ More
We propose and numerically validate a patch reflectarray modeling approach suitable for small patches that describes each patch as a pair of polarizable magnetic dipoles. We introduce an extraction technique to obtain the effective polarizability of the patch dipoles via full-wave simulations on individual patches, followed by a beamforming design routine valid under weakly scattering configurations. This dipole framework serves as an alternative to the ray tracing model often used in reflectarray designs, in which rays are drawn from the feed point and scattered off of the patch elements. Whereas the ray tracing method solves the design problem in terms of phase delays, the dipole framework presented here has the potential to accurately design and predict beam patterns using a fully dipolar treatment of empirically characterized patches. We illustrate this technique by applying it to two modulation strategies: a variable patch size reflectarray in which the phase can be continuously tuned (grayscale patch response), and a fixed patch size (binary patch response) in which on/off modulation is achieved through selective patch electrical shorting. Methods for incorporating these cases into the dipole design framework are discussed and the results compared to those from full wave simulation.
△ Less
Submitted 29 November, 2022; v1 submitted 31 May, 2022;
originally announced June 2022.
-
Optimizing Polarizability Distributions for Metasurface Apertures with Lorentzian-Constrained Radiators
Authors:
Patrick T. Bowen,
Michael Boyarsky,
Laura M. Pulido-Mancera,
David R. Smith,
Okan Yurduseven,
Mohsen Sazegar
Abstract:
We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach t…
▽ More
We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach to first obtain the necessary aperture fields, which can then be converted to a polarizability distribution using equivalence principles. To achieve this ideal distribution, the polarizability of each element would need to have unconstrained magnitude and phase; however, for a single, passive, metamaterial resonator the magnitude and phase of the effective polarizability are inextricably linked through the properties of the Lorentzian resonance, with the range of phase values restricted to a span of at most 180 degrees. Here, we introduce a family of map**s from the ideal to the available polarizability distributions, easily visualized by plotting both polarizabilities in the complex plane. Using one of these map**s it is possible to achieve highly optimized beam patterns from a metasurface antenna, despite the inherent resonator limitations. We introduce the map** technique and provide several specific examples, with numerical simulations used to confirm the design approach.
△ Less
Submitted 1 May, 2022;
originally announced May 2022.
-
Nanogap-Enhanced Infrared Spectroscopy with Template-Stripped Wafer-Scale Arrays of Buried Plasmonic Cavities
Authors:
Xiaoshu Chen,
Cristian Ciracì,
David R. Smith,
Sang-Hyun Oh
Abstract:
We have combined atomic layer lithography and template strip** to produce a new class of substrates for surface-enhanced infrared absorption (SEIRA) spectroscopy. Our structure consists of a buried and U-shaped metal-insulator-metal waveguide whose folded vertical arms efficiently couple normally incident light. The insulator is formed by atomic layer deposition (ALD) of Al2O3 and precisely defi…
▽ More
We have combined atomic layer lithography and template strip** to produce a new class of substrates for surface-enhanced infrared absorption (SEIRA) spectroscopy. Our structure consists of a buried and U-shaped metal-insulator-metal waveguide whose folded vertical arms efficiently couple normally incident light. The insulator is formed by atomic layer deposition (ALD) of Al2O3 and precisely defines the gap size. The buried nanocavities are protected from contamination by a silicon template until ready for use and exposed by template strip** on demand. The exposed nanocavity generates strong infrared resonances, tightly confines infrared radiation into a gap that is as small as 3 nm (λ/3300), and creates a dense array of millimeter-long hotspots. After partial removal of the insulators, the gaps are backfilled with benzenethiol molecules, generating distinct Fano resonances due to strong coupling with gap plasmons, and a SEIRA enhancement factor of 10^5 is observed for a 3 nm gap. Because of the wafer-scale manufacturability, single-digit-nanometer control of the gap size via ALD, and long-term storage enabled by template strip**, our buried plasmonic nanocavity substrates will benefit broad applications in sensing and spectroscopy.
△ Less
Submitted 16 April, 2022;
originally announced April 2022.
-
A backing detector for order-keV neutrons
Authors:
A. Biekert,
L. Chaplinsky,
C. W. Fink,
M. Garcia-Sciveres,
W. C. Gillis,
W. Guo,
S. A. Hertel,
G. Heuermann,
X. Li,
J. Lin,
R. Mahapatra,
D. N. McKinsey,
P. K. Patel,
B. Penning,
H. D. Pinckney,
M. Platt,
M. Pyle,
R. K. Romani,
A. Serafin,
R. J. Smith,
B. Suerfu,
V. Velan,
G. Wang,
Y. Wang,
S. L. Watkins
, et al. (1 additional authors not shown)
Abstract:
We have designed and tested a large-area (0.15~m$^2$) neutron detector based on neutron capture on \ce{^{6}Li}. The neutron detector design has been optimized for the purpose of tagging the scattering angle of keV-scale neutrons. These neutron detectors would be employed to calibrate the low-energy ($<$100 eV) nuclear recoil in detectors for dark matter and coherent elastic neutrino nucleus scatte…
▽ More
We have designed and tested a large-area (0.15~m$^2$) neutron detector based on neutron capture on \ce{^{6}Li}. The neutron detector design has been optimized for the purpose of tagging the scattering angle of keV-scale neutrons. These neutron detectors would be employed to calibrate the low-energy ($<$100 eV) nuclear recoil in detectors for dark matter and coherent elastic neutrino nucleus scattering (CE$ν$NS). We describe the design, construction, and characterization of a prototype. The prototype is designed to have a tagging efficiency of $\sim$25\% at the relevant $\mathcal{O}$(keV) neutron energies, and with a mean capture time of $\sim$17$~μ$s. The prototype was characterized using a \ce{^{252}Cf} neutron source and agreement with the simulation was observed within a few percent level.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
A Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics
Authors:
J. Aalbers,
K. Abe,
V. Aerne,
F. Agostini,
S. Ahmed Maouloud,
D. S. Akerib,
D. Yu. Akimov,
J. Akshat,
A. K. Al Musalhi,
F. Alder,
S. K. Alsum,
L. Althueser,
C. S. Amarasinghe,
F. D. Amaro,
A. Ames,
T. J. Anderson,
B. Andrieu,
N. Angelides,
E. Angelino,
J. Angevaare,
V. C. Antochi,
D. Antón Martin,
B. Antunovic,
E. Aprile,
H. M. Araújo
, et al. (572 additional authors not shown)
Abstract:
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neut…
▽ More
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neutrinos through neutrinoless double-beta decay and through a variety of astrophysical sources. A next-generation xenon-based detector will therefore be a true multi-purpose observatory to significantly advance particle physics, nuclear physics, astrophysics, solar physics, and cosmology. This review article presents the science cases for such a detector.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Imaging Scatterometer for Observing Changes to Optical Coatings During Air Annealing
Authors:
Michael Rezac,
Daniel Martinez,
Amy Gleckl,
Joshua R. Smith
Abstract:
Air annealing generally reduces absorption, scattering, and mechanical loss in amorphous coatings up to temperatures where damage occurs. Our instrument uses an industrial oven with viewports to observe coating scatter and damage during annealing.
Air annealing generally reduces absorption, scattering, and mechanical loss in amorphous coatings up to temperatures where damage occurs. Our instrument uses an industrial oven with viewports to observe coating scatter and damage during annealing.
△ Less
Submitted 19 February, 2022;
originally announced February 2022.
-
Measuring Laser Beams with a Neural Network
Authors:
Lucas R. Hofer,
Milan Krstajić,
Robert P. Smith
Abstract:
A deep neural network (NN) is used to simultaneously detect laser beams in images and measure their center coordinates, radii and angular orientations. A dataset of images containing simulated laser beams and a dataset of images with experimental laser beams, generated using a spatial light modulator, are used to train and evaluate the NN. After training on the simulated dataset the NN achieves be…
▽ More
A deep neural network (NN) is used to simultaneously detect laser beams in images and measure their center coordinates, radii and angular orientations. A dataset of images containing simulated laser beams and a dataset of images with experimental laser beams, generated using a spatial light modulator, are used to train and evaluate the NN. After training on the simulated dataset the NN achieves beam parameter rootmean-square-errors (RMSEs) of less than 3.4% on the experimental dataset. Subsequent training on the experimental dataset causes the RMSEs to fall below 1.1%. The NN method can be used as a stand-alone measurement of the beam parameters or can compliment other beam profiling methods by providing an accurate region-of-interest.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
On a Possibility to Measure the Magnetic Field Inside the CMS Yoke Elements
Authors:
V. I. Klyukhin,
R. P. Smith,
B. Curé,
C. Lesmond
Abstract:
A procedure to measure the magnetic field inside the CMS yoke elements is considered. Fast discharge of the CMS coil can be used to induce voltages in flux loops installed around selected elements of the CMS yoke. By sampling the voltage induced in any one loop, and integrating the voltage waveform over the time of the discharge, the total initial flux in the loop can be measured. The average valu…
▽ More
A procedure to measure the magnetic field inside the CMS yoke elements is considered. Fast discharge of the CMS coil can be used to induce voltages in flux loops installed around selected elements of the CMS yoke. By sampling the voltage induced in any one loop, and integrating the voltage waveform over the time of the discharge, the total initial flux in the loop can be measured. The average value of the magnetic field in the yoke element normal to the plane of the flux loop is obtained by dividing the measured value of the flux by the known area enclosed by the loop and the number of turns in the loop.
△ Less
Submitted 1 February, 2022;
originally announced February 2022.
-
The Intrinsic Fragility of the Liquid-Vapor Interface: A Stress Network Perspective
Authors:
Muhammad Rizwanur Rahman,
Li Shen,
James P. Ewen,
Daniele Dini,
E. R. Smith
Abstract:
The evolution of the liquid-vapour interface of a Lennard-Jones fluid is examined with molecular dynamics simulations using the intrinsic sampling method. Results suggest, in agreement with capillary wave theory, clear dam** of the density profiles as the temperature is increased. We identify a linear variation of the space-filling nature (fractal dimension) of the stress-clusters at the intrins…
▽ More
The evolution of the liquid-vapour interface of a Lennard-Jones fluid is examined with molecular dynamics simulations using the intrinsic sampling method. Results suggest, in agreement with capillary wave theory, clear dam** of the density profiles as the temperature is increased. We identify a linear variation of the space-filling nature (fractal dimension) of the stress-clusters at the intrinsic surface with increasing surface tension, or equivalently, with decreasing temperature. A percolation analysis of these stress networks indicates that the stress field is more disjointed at higher temperatures. This leads to more fragile interfaces that result in a reduction in surface tension at higher temperature.
△ Less
Submitted 5 April, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
Perpendicular subcritical shock structure in a collisional plasma experiment
Authors:
D. R. Russell,
G. C. Burdiak,
J. J. Carroll-Nellenback,
J. W. D. Halliday,
J. D. Hare,
S. Merlini,
L. G. Suttle,
V. Valenzuela-Villaseca,
S. J. Eardley,
J. A. Fullalove,
G. C. Rowland,
R. A. Smith,
A. Frank,
P. Hartigan,
A. L. Velikovich,
S. V. Lebedev
Abstract:
We present a study of perpendicular subcritical shocks in a collisional laboratory plasma. Shocks are produced by placing obstacles into the super-magnetosonic outflow from an inverse wire array z-pinch. We demonstrate the existence of subcritical shocks in this regime and find that secondary shocks form in the downstream. Detailed measurements of the subcritical shock structure confirm the absenc…
▽ More
We present a study of perpendicular subcritical shocks in a collisional laboratory plasma. Shocks are produced by placing obstacles into the super-magnetosonic outflow from an inverse wire array z-pinch. We demonstrate the existence of subcritical shocks in this regime and find that secondary shocks form in the downstream. Detailed measurements of the subcritical shock structure confirm the absence of a hydrodynamic jump. We calculate the classical (Spitzer) resistive diffusion length and show that it is approximately equal to the shock width. We measure little heating across the shock (< 10 % of the ion kinetic energy) which is consistent with an absence of viscous dissipation.
△ Less
Submitted 22 January, 2022;
originally announced January 2022.