Showing 1–50 of 94 results for author: Smith, C

Decay Energy Spectrometry for Improved Nuclear Material Analysis at the IAEA NML

Authors: G. B. Kim, A. R. L. Kavner, T. Parsons-Davis, S. Friedrich, O. B. Drury, D. Lee, X. Zhang, N. Hines, S. T. P. Boyd, S. Weidenbenner, K. Schreiber, S. Martinson, C. Smith, D. McNeel, S. Salazar, K. Koehler, M. Carpenter, M. Croce, D. Schmidt, J. Ullom

Abstract: Decay energy spectrometry (DES) is a novel radiometric technique for high-precision analysis of nuclear materials. DES employs the unique thermal detection physics of cryogenic microcalorimeters with ultra-high energy resolution and 100$\%$ detection efficiency to accomplish high precision decay energy measurements. Low-activity nuclear samples of 1 Bq or less, and without chemical separation, are… ▽ More Decay energy spectrometry (DES) is a novel radiometric technique for high-precision analysis of nuclear materials. DES employs the unique thermal detection physics of cryogenic microcalorimeters with ultra-high energy resolution and 100$\%$ detection efficiency to accomplish high precision decay energy measurements. Low-activity nuclear samples of 1 Bq or less, and without chemical separation, are used to provide elemental and isotopic compositions in a single measurement. Isotopic ratio precisions of 1 ppm - 1,000 ppm (isotope dependent), which is close to that of the mass spectrometry, have been demonstrated in 12-hour DES measurements of ~5 Bq samples of certified reference materials of uranium (U) and plutonium (Pu). DES has very different systematic biases and uncertainties, as well as different sensitivities to nuclides, compared to mass-spectrometry techniques. Therefore, the accuracy and confidence of nuclear material assays can be improved by combining this new technique with existing mass-spectrometry techniques. Commercial-level DES techniques and equipment are being developed for the implementation of DES at the Nuclear Material Laboratory (NML) of International Atomic Energy Agency (IAEA) to provide complementary measurements to the existing technologies. The paper describes details of DES measurement methods, as well as DES precision and accuracy to U and Pu standard sources to discuss its capability in analysis of nuclear safeguards samples. △ Less

Submitted 11 July, 2024; v1 submitted 7 June, 2024; originally announced June 2024.

Comments: This was submitted to 2022 IAEA symposium on nuclear safeguards (https://www.iaea.org/events/sg-2022), and posted at https://media.superevent.com/documents/20221027/668fdac0ee8d895ec6bcf293b1c42e6a/id-145.pdf

Ground state phases of the two-dimension electron gas with a unified variational approach

Authors: Conor Smith, Yixiao Chen, Ryan Levy, Yubo Yang, Miguel A. Morales, Shiwei Zhang

Abstract: The two-dimensional electron gas (2DEG) is a fundamental model, which is drawing increasing interest because of recent advances in experimental and theoretical studies of 2D materials. Current understanding of the ground state of the 2DEG relies on quantum Monte Carlo calculations, based on variational comparisons of different ansatze for different phases. We use a single variational ansatz, a gen… ▽ More The two-dimensional electron gas (2DEG) is a fundamental model, which is drawing increasing interest because of recent advances in experimental and theoretical studies of 2D materials. Current understanding of the ground state of the 2DEG relies on quantum Monte Carlo calculations, based on variational comparisons of different ansatze for different phases. We use a single variational ansatz, a general backflow-type wave function using a message-passing neural quantum state architecture, for a unified description across the entire density range. The variational optimization consistently leads to lower ground-state energies than previous best results. Transition into a Wigner crystal (WC) phase occurs automatically at rs = 37 +/- 1, a density lower than currently believed. Between the liquid and WC phases, the same ansatz and variational search strongly suggest the existence of intermediate states in a broad range of densities, with enhanced short-range nematic spin correlations. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Parker Solar Probe Observations of Energetic Particles in the Flank of a Coronal Mass Ejection Close to the Sun

Authors: N. A. Schwadron, Stuart D. Bale, J. Bonnell, A. Case, M. Shen, E. R. Christian, C. M. S. Cohen, A. J. Davis, M. I. Desai, K. Goetz, J. Giacalone, M. E. Hill, J. C. Kasper, K. Korreck, D. Larson, R. Livi, T. Lim, R. A. Leske, O. Malandraki, D. Malaspina, W. H. Matthaeus, D. J. McComas, R. L. McNutt Jr., R. A. Mewaldt, D. G. Mitchell , et al. (10 additional authors not shown)

Abstract: We present an event observed by Parker Solar Probe at $\sim$0.2 au on March 2, 2022 in which imaging and \emph{in situ} measurements coincide. During this event, PSP passed through structures on the flank of a streamer blowout CME including an isolated flux tube in front of the CME, a turbulent sheath, and the CME itself. Imaging observations and \emph{in situ} helicity and principal variance sign… ▽ More We present an event observed by Parker Solar Probe at $\sim$0.2 au on March 2, 2022 in which imaging and \emph{in situ} measurements coincide. During this event, PSP passed through structures on the flank of a streamer blowout CME including an isolated flux tube in front of the CME, a turbulent sheath, and the CME itself. Imaging observations and \emph{in situ} helicity and principal variance signatures consistently show the presence of flux ropes internal to the CME. In both the sheath, and the CME interval, the distributions are more isotropic, the spectra are softer, and the abundance ratios of Fe/O and He/H are lower than those in the isolated flux tube, and yet elevated relative to typical plasma and SEP abundances. These signatures in the sheath and the CME indicate that both flare populations and those from the plasma are accelerated to form the observed energetic particle enhancements. In contrast, the isolated flux tube shows large streaming, hard spectra and large Fe/O and He/H ratios, indicating flare sources. Energetic particle fluxes are most enhanced within the CME interval from suprathermal through energetic particle energies ($\sim$ keV to $>10$ MeV), indicating particle acceleration, and confinement local to the closed magnetic structure. The flux-rope morphology of the CME helps to enable local modulation and trap** of energetic particles, particularly along helicity channels and other plasma boundaries. Thus, the CME acts to build-up energetic particle populations, allowing them to be fed into subsequent higher energy particle acceleration throughout the inner heliosphere where a compression or shock forms on the CME front. △ Less

Submitted 26 May, 2024; originally announced May 2024.

Comments: 41 pages, 19 figures, In Press

Journal ref: Astrophysical Journal, 2024

Tropical cyclones on tidally locked rocky planets: Dependence on rotation period

Authors: Valeria Garcia, Cole M. Smith, Daniel R. Chavas, Thaddeus D. Komacek

Abstract: Tropical cyclones occur over the Earth's tropical oceans, with characteristic genesis regions and tracks tied to the warm ocean surface that provides energy to sustain these storms. The study of tropical cyclogenesis and evolution on Earth has led to the development of environmental favorability metrics that predict the strength of potential storms from the local background climate state. Simulati… ▽ More Tropical cyclones occur over the Earth's tropical oceans, with characteristic genesis regions and tracks tied to the warm ocean surface that provides energy to sustain these storms. The study of tropical cyclogenesis and evolution on Earth has led to the development of environmental favorability metrics that predict the strength of potential storms from the local background climate state. Simulations of the gamut of transiting terrestrial exoplanets orbiting late-type stars may offer a test of this Earth-based understanding of tropical cyclogenesis. Previous work has demonstrated that tropical cyclones are likely to form on tidally locked terrestrial exoplanets with intermediate rotation periods of $\sim 8-10~\mathrm{days}$. In this study, we test these expectations using ExoCAM simulations with both a sufficient horizontal resolution of 0.47$^\circ$ x 0.63$^\circ$ required to permit tropical cyclogenesis along with a thermodynamically active slab ocean. We conduct simulations of tidally locked and ocean-covered Earth-sized planets orbiting late-type M dwarf stars with varying rotation periods from 4-16 days in order to cross the predicted maximum in tropical cyclogenesis. We track tropical cyclones that form in each simulation and assess their location of maximum wind, evolution, and maximum wind speeds. We compare the resulting tropical cyclone locations and strengths to predictions based on environmental favorability metrics, finding good agreement between the Earth-based metrics and our simulated storms with a local maximum in both tropical cyclone frequency and intensity at a rotation period of 8 days. Our results suggest that environmental favorability metrics used for tropical cyclones on Earth may also be applicable to temperate tidally locked Earth-sized rocky exoplanets with abundant surface liquid water. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Comments: 13 pages, 5 figures, accepted at AAS Journals

Ab-initio investigation of hot electron transfer in CO$_2$ plasmonic photocatalysis in presence of hydroxyl adsorbate

Authors: Zelio Fusco, Dirk Koenig, Sean C. Smith, Fiona Jean Beck

Abstract: Photoreduction of carbon dioxide (CO$_2$) on plasmonic structures is of great interest in photocatalysis to aid selectivity. While species commonly found in reaction environments and associated intermediates can steer the reaction down different pathways by altering the potential energy landscape of the system, they are often not addressed when designing efficient plasmonic catalysts. Here, we per… ▽ More Photoreduction of carbon dioxide (CO$_2$) on plasmonic structures is of great interest in photocatalysis to aid selectivity. While species commonly found in reaction environments and associated intermediates can steer the reaction down different pathways by altering the potential energy landscape of the system, they are often not addressed when designing efficient plasmonic catalysts. Here, we perform an atomistic study of the effect of the hydroxyl group (OH) on CO$_2$ activation and hot electron generation and transfer using first-principle calculations. We show that the presence of OH is essential in breaking the linear symmetry of CO$_2$, which leads to a charge redistribution and a decrease in the O=C=O angle to 134°, thereby activating CO$_2$. Analysis of the partial density of states (pDOS) demonstrates that the OH group mediates the orbital hybridization between Au and CO$_2$ resulting in more accessible states, thus facilitating charge transfer. By employing time-dependent density functional theory (TDDFT), we quantify the fraction of hot electrons directly generated into hybridized molecular states at resonance, demonstrating a broader energy distribution and a 11% increase in charge-transfer in the presence of OH groups. We further show that the spectral overlap between excitation energy and plasmon resonance plays a critical role in efficiently modulating electron transfer processes. These findings contribute to the mechanistic understanding of plasmon-mediated reactions and demonstrate the importance of co-adsorbed species in tailoring the electron transfer processes, opening new avenues for enhancing selectivity. △ Less

Submitted 18 February, 2024; originally announced February 2024.

Exploring the effectiveness of documentary film for science communication

Authors: Sunanda Prabhu Gaunkar, Ellen Askey, Meira Chasman, Koksuke Takaira, Calahan Smith, Amanda Murphy, Nancy Kawalek

Abstract: The complexity of science and its frequent lack of accessibility often creates disinterest among the general public. Furthermore, there exists a gap between the public perception of science and the reality of scientific research, which severely limits the scope of public engagement with science. A new docuseries, Curiosity-The Making of a Scientist, created at the STAGE Lab at the University of Ch… ▽ More The complexity of science and its frequent lack of accessibility often creates disinterest among the general public. Furthermore, there exists a gap between the public perception of science and the reality of scientific research, which severely limits the scope of public engagement with science. A new docuseries, Curiosity-The Making of a Scientist, created at the STAGE Lab at the University of Chicago, addresses this issue by increasing the awareness and excitement around science and scientists. Each film of Curiosity focuses on a single scientist and tells the story of how they became a scientist by interweaving elements of their personal life together with the successes and failures they encounter in their scientific work. Our intended audience includes scientists and non-scientists with little or no previous exposure to quantum physics or science. The pilot of the series, SUPERPOSITION, is a 25-minute film about a graduate student in quantum physics at the University of Chicago. To evaluate the success of this film, it was screened to several audiences covering most age groups, and audience members were requested to fill out a detailed anonymous survey after the viewing. Via these surveys, viewers reported an increased interest in science and a connection to the personal story of the graduate student that was purposefully woven throughout the film. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Quantized conductance in split gate superconducting quantum point contacts with InGaAs semiconducting two-dimensional electron systems

Authors: Kaveh Delfanazari, Jiahui Li, Yusheng Xiong, Pengcheng Ma, Reuben K. Puddy, Teng Yi, Ian Farrer, Sachio Komori, Jason W. A. Robinson, Llorenc Serra, David A. Ritchie, Michael J. Kelly, Hannah J. Joyce, Charles G. Smith

Abstract: Quantum point contact or QPC -- a constriction in a semiconducting two-dimensional (2D) electron system with a quantized conductance -- has been found as the building block of novel spintronic, and topological electronic circuits. They can also be used as readout electronic, charge sensor or switch in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a C… ▽ More Quantum point contact or QPC -- a constriction in a semiconducting two-dimensional (2D) electron system with a quantized conductance -- has been found as the building block of novel spintronic, and topological electronic circuits. They can also be used as readout electronic, charge sensor or switch in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a Cooper pairs QPC analogue known as superconducting quantum point contact (SQPC). The technological development of such quantum devices has been prolonged due to the challenges of maintaining their geometrical requirement and near-unity superconductor-semiconductor interface transparency. Here, we develop advanced nanofabrication, material and device engineering techniques and report on an innovative realisation of nanoscale SQPC arrays with split gate technology in semiconducting 2D electron systems, exploiting the special gate tunability of the quantum wells, and report the first experimental observation of conductance quantization in hybrid InGaAs-Nb SQPCs. We observe reproducible quantized conductance at zero magnetic fields in multiple quantum nanodevices fabricated in a single chip and systematically investigate the quantum transport of SQPCs at low and high magnetic fields for their potential applications in quantum metrology, for extremely accurate voltage standards, and fault-tolerant quantum technologies. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Differentiable Vertex Fitting for Jet Flavour Tagging

Authors: Rachel E. C. Smith, Inês Ochoa, Rúben Inácio, Jonathan Shoemaker, Michael Kagan

Abstract: We propose a differentiable vertex fitting algorithm that can be used for secondary vertex fitting, and that can be seamlessly integrated into neural networks for jet flavour tagging. Vertex fitting is formulated as an optimization problem where gradients of the optimized solution vertex are defined through implicit differentiation and can be passed to upstream or downstream neural network compone… ▽ More We propose a differentiable vertex fitting algorithm that can be used for secondary vertex fitting, and that can be seamlessly integrated into neural networks for jet flavour tagging. Vertex fitting is formulated as an optimization problem where gradients of the optimized solution vertex are defined through implicit differentiation and can be passed to upstream or downstream neural network components for network training. More broadly, this is an application of differentiable programming to integrate physics knowledge into neural network models in high energy physics. We demonstrate how differentiable secondary vertex fitting can be integrated into larger transformer-based models for flavour tagging and improve heavy flavour jet classification. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Comments: 11 pages

Molecular Dynamics Simulation of Apolipoprotein E3 Lipid Nanodiscs

Authors: Patrick Allen, Adam C. Smith, Vernon Benedicto, Abbas Abdulhassan, Vasanthy Narayanaswami, Enrico Tapavicza

Abstract: Nanodiscs are binary discoidal complexes of a phospholipid bilayer circumscribed by belt-like helical scaffold proteins. Using coarse-grained and all-atom molecular dynamics simulations, we explore the stability, size, and structure of nanodiscs formed between the N-terminal domain of apolipoprotein E3 (apoE3-NT) and variable number of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) molecules.… ▽ More Nanodiscs are binary discoidal complexes of a phospholipid bilayer circumscribed by belt-like helical scaffold proteins. Using coarse-grained and all-atom molecular dynamics simulations, we explore the stability, size, and structure of nanodiscs formed between the N-terminal domain of apolipoprotein E3 (apoE3-NT) and variable number of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) molecules. We study both parallel and antiparallel double-belt configurations, consisting of four proteins per nanodisc. Our simulations predict nanodiscs containing between 240 and 420 DMPC molecules to be stable. The antiparallel configurations exhibit an average of 1.6 times more amino acid interactions between protein chains and 2 times more ionic contacts, compared to the parallel configuration. With one exception, DMPC order parameters are consistently larger in the antiparallel configuration than in the parallel one. In most cases, the root mean square deviation of the positions of the protein backbone atoms is smaller in the antiparallel configuration. We further report nanodisc size, thickness, radius of gyration, and solvent accessible surface area. Combining all investigated parameters, we hypothesize the antiparallel protein configuration leading to more stable and more rigid nanodiscs than the parallel one. △ Less

Submitted 20 August, 2023; originally announced August 2023.

HelioSwarm: A Multipoint, Multiscale Mission to Characterize Turbulence

Authors: Kristopher G. Klein, Harlan Spence, Olga Alexandrova, Matthew Argall, Lev Arzamasskiy, Jay Bookbinder, Theodore Broeren, Damiano Caprioli, Anthony Case, Benjamin Chandran, Li-Jen Chen, Ivan Dors, Jonathan Eastwood, Colin Forsyth, Antoinette Galvin, Vincent Genot, Jasper Halekas, Michael Hesse, Butler Hine, Tim Horbury, Lan Jian, Justin Kasper, Matthieu Kretzschmar, Matthew Kunz, Benoit Lavraud , et al. (25 additional authors not shown)

Abstract: HelioSwarm (HS) is a NASA Medium-Class Explorer mission of the Heliophysics Division designed to explore the dynamic three-dimensional mechanisms controlling the physics of plasma turbulence, a ubiquitous process occurring in the heliosphere and in plasmas throughout the universe. This will be accomplished by making simultaneous measurements at nine spacecraft with separations spanning magnetohydr… ▽ More HelioSwarm (HS) is a NASA Medium-Class Explorer mission of the Heliophysics Division designed to explore the dynamic three-dimensional mechanisms controlling the physics of plasma turbulence, a ubiquitous process occurring in the heliosphere and in plasmas throughout the universe. This will be accomplished by making simultaneous measurements at nine spacecraft with separations spanning magnetohydrodynamic and sub-ion spatial scales in a variety of near-Earth plasmas. In this paper, we describe the scientific background for the HS investigation, the mission goals and objectives, the observatory reference trajectory and instrumentation implementation before the start of Phase B. Through multipoint, multiscale measurements, HS promises to reveal how energy is transferred across scales and boundaries in plasmas throughout the universe. △ Less

Submitted 10 June, 2023; originally announced June 2023.

Comments: Submitted to Space Science Reviews, 60 pages, 15 figures, 2 videos

Embedded, micro-interdigitated flow fields in high areal-loading intercalation electrodes towards seawater desalination and beyond

Authors: Vu Q. Do, Erik R. Reale, Irwin C. Loud IV, Paul G. Rozzi, Haosen Tan, David A. Willis, Kyle C. Smith

Abstract: Faradaic deionization (FDI) is a promising technology for energy-efficient water desalination using porous electrodes containing redox-active materials. Herein, we demonstrate for the first time the capability of a symmetric FDI flow cell to produce freshwater (<17.1 mM NaCl) from concentrated brackish water (118mM), to produce effluent near freshwater salinity (19.1 mM) from influent with seawate… ▽ More Faradaic deionization (FDI) is a promising technology for energy-efficient water desalination using porous electrodes containing redox-active materials. Herein, we demonstrate for the first time the capability of a symmetric FDI flow cell to produce freshwater (<17.1 mM NaCl) from concentrated brackish water (118mM), to produce effluent near freshwater salinity (19.1 mM) from influent with seawater-level salinity (496 mM), and to reduce the salinity of hypersaline brine from 781 mM to 227 mM. These remarkable salt-removal levels were enabled by using flow-through electrodes with high areal-loading of nickel hexacyanoferrate (NiHCF) Prussian Blue analogue intercalation material. The pum** energy consumption due to flow-through electrodes was mitigated by embedding an interdigitated array of <100 $μ$m wide channels in the electrodes using laser micromachining. The micron-scale dimensions of the resulting embedded, micro-interdigitated flow fields (e$μ$-IDFFs) facilitate flow-through electrodes with high apparent permeability while minimizing active-material loss. Our modeling shows that these e$μ$-IDFFs are more suitable for our intercalation electrodes because they have >100X lower permeability compared to common redox-flow battery electrodes, for which millimetric flow-channel widths were used exclusively in the past. Total desalination thermodynamic energy efficiency (TEE) was improved by more than ten-fold relative to unpatterned electrodes: 40.0% TEE for brackish water, 11.7% TEE for hypersaline brine, and 7.4% TEE for seawater-salinity feeds. Water transport between diluate and brine streams and charge efficiency losses resulting from (electro)chemical effects are implicated as limiting energy efficiency and water recovery, motivating their investigation for enhancing future FDI performance. △ Less

Submitted 8 June, 2023; originally announced June 2023.

Comments: 70 pages, 23 figures. Energy Environ. Sci. (2023)

Fractal Nodal Band Structures

Authors: Marcus Stålhammar, Cristiane Morais Smith

Abstract: Non-Hermitian systems exhibit interesting band structures, where novel topological phenomena arise from the existence of exceptional points at which eigenvalues and eigenvectors coalesce. One important open question is how this would manifest at non-integer dimension. Here, we report on the appearance of fractal eigenvalue degeneracies and Fermi surfaces in Hermitian and non-Hermitian topological… ▽ More Non-Hermitian systems exhibit interesting band structures, where novel topological phenomena arise from the existence of exceptional points at which eigenvalues and eigenvectors coalesce. One important open question is how this would manifest at non-integer dimension. Here, we report on the appearance of fractal eigenvalue degeneracies and Fermi surfaces in Hermitian and non-Hermitian topological band structures. This might have profound implications on the physics of black holes and Fermi surface instability driven phenomena, such as superconductivity and charge density waves. △ Less

Submitted 19 October, 2023; v1 submitted 18 April, 2023; originally announced April 2023.

Comments: Article published in Physical Review Research. 5+3 pages, 5+3 figures

Journal ref: Phys. Rev. Research 5, 043043 (2023)

Climate uncertainty impacts on optimal mitigation pathways and social cost of carbon

Authors: Christopher J. Smith, Alaa Al Khourdajie, Pu Yang, Doris Folini

Abstract: Emissions pathways used in climate policy analysis are often derived from integrated assessment models. However, such emissions pathways do not typically include climate feedbacks on socioeconomic systems and by extension do not consider climate uncertainty in their construction. We use a well-known cost-benefit integrated assessment model, the Dynamic Integrated Climate-Economy (DICE) model, with… ▽ More Emissions pathways used in climate policy analysis are often derived from integrated assessment models. However, such emissions pathways do not typically include climate feedbacks on socioeconomic systems and by extension do not consider climate uncertainty in their construction. We use a well-known cost-benefit integrated assessment model, the Dynamic Integrated Climate-Economy (DICE) model, with its climate component replaced by the Finite-amplitude Impulse Response (FaIR) model (v2.1). The climate uncertainty in FaIR is sampled with an ensemble that is consistent with historically observed climate and Intergovernmental Panel on Climate Change (IPCC) assessed ranges of key climate variables such as equilibrium climate sensitivity. Three scenarios are produced: a pathway similar to the "optimal welfare" scenario of DICE that has similar warming outcomes to current policies, and pathways that limit warming to "well-below" 2C and 1.5C with low overshoot, in line with Paris Agreement long-term temperature goals. Climate uncertainty alone is responsible for a factor of five variation (5-95% range) in the social cost of carbon in the 1.5C scenario. CO2 emissions trajectories resulting from the optimal level of emissions abatement in all pathways are also sensitive to climate uncertainty, with 2050 emissions ranging from -12 to +14 GtCO2/yr in the 1.5C scenario. Equilibrium climate sensitivity and the strength of present-day aerosol effective radiative forcing are strong determinants of social cost of carbon and mid-century CO2 emissions. This shows that narrowing climate uncertainty leads to more refined estimates for the social cost of carbon and provides more certainty about the optimal rate of emissions abatement. Including climate and climate uncertainty in integrated assessment model derived emissions scenarios would address a key missing feedback in scenario construction. △ Less

Submitted 18 July, 2023; v1 submitted 18 April, 2023; originally announced April 2023.

Comments: 15 pages, 3 figures

Breaking and resurgence of symmetry in the non-Hermitian Su-Schrieffer-Heeger model in photonic waveguides

Authors: E. Slootman, W. Cherifi, L. Eek, R. Arouca, E. J. Bergholtz, M. Bourennane, C. Morais Smith

Abstract: Symmetry is one of the cornerstones of modern physics and has profound implications in different areas. In symmetry-protected topological systems, symmetries are responsible for protecting surface states, which are at the heart of the fascinating properties exhibited by these materials. When the symmetry protecting the edge mode is broken, the topological phase becomes trivial. By engineering loss… ▽ More Symmetry is one of the cornerstones of modern physics and has profound implications in different areas. In symmetry-protected topological systems, symmetries are responsible for protecting surface states, which are at the heart of the fascinating properties exhibited by these materials. When the symmetry protecting the edge mode is broken, the topological phase becomes trivial. By engineering losses that break the symmetry protecting a topological Hermitian phase, we show that a new genuinely non-Hermitian symmetry emerges, which protects and selects one of the boundary modes: the topological monomode. Moreover, the topology of the non-Hermitian system can be characterized by an effective Hermitian Hamiltonian in a higher dimension. To corroborate the theory, we experimentally investigated the non-Hermitian 1D and 2D SSH models using photonic lattices and observed dynamically generated monomodes in both cases. We classify the systems in terms of the (non-Hermitian) symmetries that are present and calculate the corresponding topological invariants. △ Less

Submitted 9 May, 2024; v1 submitted 12 April, 2023; originally announced April 2023.

Comments: 24 pages, 17 figures

Journal ref: Phys. Rev. Research 6, 023140 (2024)

Laser-Induced Cavitation for Controlling Crystallization from Solution

Authors: Nagaraj Nagalingam, Aswin Raghunathan, Vikram Korede, Christian Poelma, Carlas S. Smith, Remco Hartkamp, Johan T. Padding, Huseyin Burak Eral

Abstract: We demonstrate that a cavitation bubble initiated by a Nd:YAG laser pulse below breakdown threshold induces crystallization from supersaturated aqueous solutions with supersaturation and laser-energy dependent nucleation kinetics. Combining high-speed video microscopy and simulations, we argue that a competition between the dissipation of absorbed laser energy as latent and sensible heat dictates… ▽ More We demonstrate that a cavitation bubble initiated by a Nd:YAG laser pulse below breakdown threshold induces crystallization from supersaturated aqueous solutions with supersaturation and laser-energy dependent nucleation kinetics. Combining high-speed video microscopy and simulations, we argue that a competition between the dissipation of absorbed laser energy as latent and sensible heat dictates the solvent evaporation rate and creates a momentary supersaturation peak at the vapor-liquid interface. The number and morphology of crystals correlate to the characteristics of the simulated supersaturation peak. △ Less

Submitted 17 July, 2023; v1 submitted 2 February, 2023; originally announced February 2023.

Low-cost fluorescence microscope with microfluidic device fabrication for optofluidic applications

Authors: Nagaraj Nagalingam, Aswin Raghunathan, Vikram Korede, Edwin F. J. Overmars, Shih-Te Hung, Remco Hartkamp, Johan T. Padding, Carlas S. Smith, Huseyin Burak Eral

Abstract: Optofluidic devices have revolutionized the manipulation and transportation of fluid at smaller length scales ranging from micrometers to millimeters. We describe a dedicated optical setup for studying laser-induced cavitation inside a microchannel. In a typical experiment, we use a tightly focused laser beam to locally evaporate the solution laced with a dye resulting in the formation of a microb… ▽ More Optofluidic devices have revolutionized the manipulation and transportation of fluid at smaller length scales ranging from micrometers to millimeters. We describe a dedicated optical setup for studying laser-induced cavitation inside a microchannel. In a typical experiment, we use a tightly focused laser beam to locally evaporate the solution laced with a dye resulting in the formation of a microbubble. The evolving bubble interface is tracked using high-speed microscopy and digital image analysis. Furthermore, we extend this system to analyze fluid flow through fluorescence$-$Particle Image Velocimetry (PIV) technique with minimal adaptations. In addition, we demonstrate the protocols for the in-house fabrication of a microchannel tailored to function as a sample holder in this optical setup. In essence, we present a complete guide for constructing a fluorescence microscope from scratch using standard optical components with flexibility in the design and at a lower cost compared to its commercial analogues. △ Less

Submitted 28 February, 2023; v1 submitted 30 January, 2023; originally announced February 2023.

Comments: N. Nagalingam and A. Raghunathan contributed equally to this work

Turbulence Driving by Interstellar Pickup Ions in the Outer Solar Wind

Authors: Philip A. Isenberg, Bernard J. Vasquez, Charles W. Smith

Abstract: We revisit the question of how the unstable scattering of interstellar pickup ions (PUIs) may drive turbulence in the outer solar wind, and why the energy released into fluctuations by this scattering appears to be significantly less than the standard bispherical prediction. We suggest that energization of the newly picked-up ions by the ambient turbulence during the scattering process can result… ▽ More We revisit the question of how the unstable scattering of interstellar pickup ions (PUIs) may drive turbulence in the outer solar wind, and why the energy released into fluctuations by this scattering appears to be significantly less than the standard bispherical prediction. We suggest that energization of the newly picked-up ions by the ambient turbulence during the scattering process can result in a more spherical distribution of PUIs, and reduce the generated fluctuation energy to a level consistent with the observations of turbulent intensities and core solar wind heating. This scenario implies the operation of a self-regulation mechanism that maintains the observed conditions of turbulence and heating in the PUI-dominated solar wind. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Comments: To be published in The Astrophysical Journal

The essential role of multi-point measurements in investigations of turbulence, three-dimensional structure, and dynamics: the solar wind beyond single scale and the Taylor Hypothesis

Authors: W. H. Matthaeus, S. Adhikari, R. Bandyopadhyay, M. R. Brown, R. Bruno, J. Borovsky, V. Carbone, D. Caprioli, A. Chasapis, R. Chhiber, S. Dasso, P. Dmitruk, L. Del Zanna, P. A. Dmitruk, Luca Franci, S. P. Gary, M. L. Goldstein, D. Gomez, A. Greco, T. S. Horbury, Hantao Ji, J. C. Kasper, K. G. Klein, S. Landi, Hui Li , et al. (27 additional authors not shown)

Abstract: Space plasmas are three-dimensional dynamic entities. Except under very special circumstances, their structure in space and their behavior in time are not related in any simple way. Therefore, single spacecraft in situ measurements cannot unambiguously unravel the full space-time structure of the heliospheric plasmas of interest in the inner heliosphere, in the Geospace environment, or the outer h… ▽ More Space plasmas are three-dimensional dynamic entities. Except under very special circumstances, their structure in space and their behavior in time are not related in any simple way. Therefore, single spacecraft in situ measurements cannot unambiguously unravel the full space-time structure of the heliospheric plasmas of interest in the inner heliosphere, in the Geospace environment, or the outer heliosphere. This shortcoming leaves numerous central questions incompletely answered. Deficiencies remain in at least two important subjects, Space Weather and fundamental plasma turbulence theory, due to a lack of a more complete understanding of the space-time structure of dynamic plasmas. Only with multispacecraft measurements over suitable spans of spatial separation and temporal duration can these ambiguities be resolved. We note that these characterizations apply to turbulence across a wide range of scales, and also equally well to shocks, flux ropes, magnetic clouds, current sheets, stream interactions, etc. In the following, we will describe the basic requirements for resolving space-time structure in general, using turbulence' as both an example and a principal target or study. Several types of missions are suggested to resolve space-time structure throughout the Heliosphere. △ Less

Submitted 26 November, 2022; v1 submitted 22 November, 2022; originally announced November 2022.

Comments: White Paper submitted to: Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033. arXiv admin note: substantial text overlap with arXiv:1903.06890

Pi theorem formulation of flood map**

Authors: Mark S. Bartlett, Jared Van Blitterswyk, Martha Farella, **shu Li, Curtis Smith, Assaad Mrad

Abstract: While physical phenomena are stated in terms of physical laws that are homogeneous in all dimensions, the mechanisms and patterns of the physical phenomena are independent of the form of the units describing the physical process. Accordingly, across different conditions, the similarity of a process may be captured through a dimensionless reformulation of the physical problem with Buckingham $Π$ th… ▽ More While physical phenomena are stated in terms of physical laws that are homogeneous in all dimensions, the mechanisms and patterns of the physical phenomena are independent of the form of the units describing the physical process. Accordingly, across different conditions, the similarity of a process may be captured through a dimensionless reformulation of the physical problem with Buckingham $Π$ theorem. Here, we apply Buckingham $Π$ theorem for creating dimensionless indices for capturing the similarity of the flood process, and in turn, these indices allow machine learning to map the likelihood of pluvial (flash) flooding over a landscape. In particular, we use these dimensionless predictors with a logistic regression machine learning (ML) model for a probabilistic determination of flood risk. The logistic regression derived flood maps compare well to 2D hydraulic model results that are the basis of the Federal Emergency Management Agency (FEMA) maps. As a result, the indices and logistic regression also provide the potential to expand existing FEMA maps to new (unmapped) areas and a wider spectrum of flood flows and precipitation events. Our results demonstrate that the new dimensionless indices capture the similarity of the flood process across different topographies and climate regions. Consequently, these dimensionless indices may expand observations of flooding (e.g., satellite) to the risk of flooding in new areas, as well as provide a basis for the rapid, real-time estimation of flood risk on a worldwide scale. △ Less

Submitted 16 November, 2022; v1 submitted 1 November, 2022; originally announced November 2022.

Comments: 25 pages, 11 figures. Equations 6 and 7 were adjusted. The results remain unchanged. Figure 11 was replaced to reflect the equation adjustments. Minor edits and formatting changes were made

Bayesian Neural Networks for Geothermal Resource Assessment: Prediction with Uncertainty

Authors: Stephen Brown, William L. Rodi, Marco Seracini, Chen Gu, Michael Fehler, James Faulds, Connor M. Smith, Sven Treitel

Abstract: We consider the application of machine learning to the evaluation of geothermal resource potential. A supervised learning problem is defined where maps of 10 geological and geophysical features within the state of Nevada, USA are used to define geothermal potential across a broad region. We have available a relatively small set of positive training sites (known resources or active power plants) an… ▽ More We consider the application of machine learning to the evaluation of geothermal resource potential. A supervised learning problem is defined where maps of 10 geological and geophysical features within the state of Nevada, USA are used to define geothermal potential across a broad region. We have available a relatively small set of positive training sites (known resources or active power plants) and negative training sites (known drill sites with unsuitable geothermal conditions) and use these to constrain and optimize artificial neural networks for this classification task. The main objective is to predict the geothermal resource potential at unknown sites within a large geographic area where the defining features are known. These predictions could be used to target promising areas for further detailed investigations. We describe the evolution of our work from defining a specific neural network architecture to training and optimization trials. Upon analysis we expose the inevitable problems of model variability and resulting prediction uncertainty. Finally, to address these problems we apply the concept of Bayesian neural networks, a heuristic approach to regularization in network training, and make use of the practical interpretation of the formal uncertainty measures they provide. △ Less

Submitted 25 October, 2023; v1 submitted 30 September, 2022; originally announced September 2022.

Comments: 27 pages, 12 figures

Readout of a quantum processor with high dynamic range Josephson parametric amplifiers

Authors: T. C. White, Alex Opremcak, George Sterling, Alexander Korotkov, Daniel Sank, Rajeev Acharya, Markus Ansmann, Frank Arute, Kunal Arya, Joseph C. Bardin, Andreas Bengtsson, Alexandre Bourassa, Jenna Bovaird, Leon Brill, Bob B. Buckley, David A. Buell, Tim Burger, Brian Burkett, Nicholas Bushnell, Zijun Chen, Ben Chiaro, Josh Cogan, Roberto Collins, Alexander L. Crook, Ben Curtin , et al. (69 additional authors not shown)

Abstract: We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 $Ω$ environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250-300 MHz, with input saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmar… ▽ More We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 $Ω$ environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250-300 MHz, with input saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmark these devices, providing a calibration for readout power, an estimate of amplifier added noise, and a platform for comparison against standard impedance matched parametric amplifiers with a single dc-SQUID. We find that the high power rf-SQUID array design has no adverse effect on system noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on amplifier added noise at 1.6 times the quantum limit. Lastly, amplifiers with this design show no degradation in readout fidelity due to gain compression, which can occur in multi-tone multiplexed readout with traditional JPAs. △ Less

Submitted 22 November, 2022; v1 submitted 16 September, 2022; originally announced September 2022.

Comments: 10 pages, 10 figures

Journal ref: Appl. Phys. Lett. 122, 014001 (2023)

Turbulence in the outer heliosphere

Authors: Federico Fraternale, Laxman Adhikari, Horst Fichtner, Tae K. Kim, Jens Kleimann, Sean Oughton, Nikolai V. Pogorelov, Vadim Roytershteyn, Charles W. Smith, Arcadi V. Usmanov, G P. Zank, Lingling Zhao

Abstract: The solar wind (SW) and local interstellar medium (LISM) are turbulent media. Their interaction is governed by complex physical processes and creates heliospheric regions with significantly different properties in terms of particle populations, bulk flow and turbulence. Our knowledge of the solar wind turbulence \nature and dynamics mostly relies on near-Earth and near-Sun observations, and has be… ▽ More The solar wind (SW) and local interstellar medium (LISM) are turbulent media. Their interaction is governed by complex physical processes and creates heliospheric regions with significantly different properties in terms of particle populations, bulk flow and turbulence. Our knowledge of the solar wind turbulence \nature and dynamics mostly relies on near-Earth and near-Sun observations, and has been increasingly improving in recent years due to the availability of a wealth of space missions, including multi-spacecraft missions. In contrast, the properties of turbulence in the outer heliosphere are still not completely understood. In situ observations by Voyager and New Horizons, and remote neutral atom measurements by IBEX strongly suggest that turbulence is one of the critical processes acting at the heliospheric interface. It is intimately connected to charge exchange processes responsible for the production of suprathermal ions and energetic neutral atoms. This paper reviews the observational evidence of turbulence in the distant SW and in the LISM, advances in modeling efforts, and open challenges. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Comments: 82 pages, 31 figures. Paper accepted by Space Science Reviews (collection: The Heliosphere in the Local Interstellar Medium: Into the Unknown), and presented at the ISSI Workshop on November 8-12, 2021

Resolving Power of Visible to Near-Infrared Hybrid $β$-Ta/NbTiN Kinetic Inductance Detectors

Authors: Kevin Kouwenhoven, Daniel Fan, Enrico Biancalani, Steven A. H. de Rooij, Tawab Karim, Carlas S. Smith, Vignesh Murugesan, David J. Thoen, Jochem J. A. Baselmans, Pieter J. de Visser

Abstract: Kinetic Inductance Detectors (KIDs) are superconducting energy-resolving detectors, sensitive to single photons from the near-infrared to ultraviolet. We study a hybrid KID design consisting of a beta phase tantalum ($β$-Ta) inductor and a NbTiN interdigitated capacitor (IDC). The devices show an average intrinsic quality factor $Q_i$ of 4.3$\times10^5$ $\pm$ 1.3 $\times10^5$. To increase the powe… ▽ More Kinetic Inductance Detectors (KIDs) are superconducting energy-resolving detectors, sensitive to single photons from the near-infrared to ultraviolet. We study a hybrid KID design consisting of a beta phase tantalum ($β$-Ta) inductor and a NbTiN interdigitated capacitor (IDC). The devices show an average intrinsic quality factor $Q_i$ of 4.3$\times10^5$ $\pm$ 1.3 $\times10^5$. To increase the power captured by the light sensitive inductor, we 3D-print an array of 150$\times$150 $μ$m resin micro lenses on the backside of the sapphire substrate. The shape deviation between design and printed lenses is smaller than 1$μ$m, and the alignment accuracy of this process is $δ_x = +5.8 \pm 0.5$ $μ$m and $δ_y = +8.3 \pm 3.3$ $μ$m. We measure a resolving power for 1545-402 nm that is limited to 4.9 by saturation in the KID's phase response. We can model the saturation in the phase response with the evolution of the number of quasiparticles generated by a photon event. An alternative coordinate system that has a linear response raises the resolving power to 5.9 at 402 nm. We verify the measured resolving power with a two-line measurement using a laser source and a monochromator. We discuss several improvements that can be made to the devices on a route towards KID arrays with high resolving powers. △ Less

Submitted 13 February, 2023; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: 13 pages, 11 Figures, Journal Paper

Journal ref: Phys. Rev. Appl. 19 (2023) 034007

Odd-even effect in n-alkane systems: A molecular dynamics study

Authors: I. Dhiman, Marcella C. Berg, Loukas Petridis, Jeremy C Smith, S. Gautam

Abstract: Alternation in various properties of n-alkanes (CnH2n+2) as a function of carbon content (n) is termed odd-even effect. Here, we report a comprehensive molecular dynamics simulation study on n-alkane systems carried out with n ranging between 3 (propane) and 8 (octane), examining the odd-even effect in melting point, density, intramolecular conformational ordering, translational and rotational mot… ▽ More Alternation in various properties of n-alkanes (CnH2n+2) as a function of carbon content (n) is termed odd-even effect. Here, we report a comprehensive molecular dynamics simulation study on n-alkane systems carried out with n ranging between 3 (propane) and 8 (octane), examining the odd-even effect in melting point, density, intramolecular conformational ordering, translational and rotational motion. We observe an odd-even alternation in these properties, but with heptane (n = 7) exhibiting anomalous behavior for all except conformational ordering. Our simulations also show the presence of odd-even behavior in rotational and translational dynamics, below and above the melting point, respectively. The results highlight the role of both molecular shape and the variation in density and their interplay in the origins of the odd-even effect. △ Less

Submitted 6 May, 2022; originally announced May 2022.

Comments: 22 pages, first 16 constituting the main, followed by 6 more of supplementary material. 5 figures and 1 Table in the main, 6 figures and 1 Table in the supplementary material

Low dosage 3D volume fluorescence microscopy imaging using compressive sensing

Authors: Varun Mannam, Jacob Brandt, Cody J. Smith, Scott Howard

Abstract: Fluorescence microscopy has been a significant tool to observe long-term imaging of embryos (in vivo) growth over time. However, cumulative exposure is phototoxic to such sensitive live samples. While techniques like light-sheet fluorescence microscopy (LSFM) allow for reduced exposure, it is not well suited for deep imaging models. Other computational techniques are computationally expensive and… ▽ More Fluorescence microscopy has been a significant tool to observe long-term imaging of embryos (in vivo) growth over time. However, cumulative exposure is phototoxic to such sensitive live samples. While techniques like light-sheet fluorescence microscopy (LSFM) allow for reduced exposure, it is not well suited for deep imaging models. Other computational techniques are computationally expensive and often lack restoration quality. To address this challenge, one can use various low-dosage imaging techniques that are developed to achieve the 3D volume reconstruction using a few slices in the axial direction (z-axis); however, they often lack restoration quality. Also, acquiring dense images (with small steps) in the axial direction is computationally expensive. To address this challenge, we present a compressive sensing (CS) based approach to fully reconstruct 3D volumes with the same signal-to-noise ratio (SNR) with less than half of the excitation dosage. We present the theory and experimentally validate the approach. To demonstrate our technique, we capture a 3D volume of the RFP labeled neurons in the zebrafish embryo spinal cord (30um thickness) with the axial sampling of 0.1um using a confocal microscope. From the results, we observe the CS-based approach achieves accurate 3D volume reconstruction from less than 20% of the entire stack optical sections. The developed CS-based methodology in this work can be easily applied to other deep imaging modalities such as two-photon and light-sheet microscopy, where reducing sample photo-toxicity is a critical challenge. △ Less

Submitted 3 January, 2022; originally announced January 2022.

Fluid-structure instability forecasts thoracic aortic aneurysm progression

Authors: Tom Y. Zhao, Ethan M. I. Johnson, Guy Elisha, Sourav Halder, Ben C. Smith, Bradley D. Allen, Michael Markl, Neelesh A. Patankar

Abstract: The basic mechanism driving aneurysm growth is unknown. Currently, clinical diagnosis of an aneurysm is mainly informed by retrospective tracking of its size and growth rate. However, aneurysms can rupture before reactive criteria are met or remain stable when they are exceeded. Here, we identify a fluid-structure instability that is associated with abnormal aortic dilatation. Our analysis yields… ▽ More The basic mechanism driving aneurysm growth is unknown. Currently, clinical diagnosis of an aneurysm is mainly informed by retrospective tracking of its size and growth rate. However, aneurysms can rupture before reactive criteria are met or remain stable when they are exceeded. Here, we identify a fluid-structure instability that is associated with abnormal aortic dilatation. Our analysis yields a measurable dimensionless number and its analytically derived critical threshold. This threshold pinpoints the transition from stable flow to unstable aortic fluttering as a function of the physiological properties composing the dimensionless number, like blood pressure and aortic compliance. A retrospective study was then conducted with 4D-flow MRI data from 117 patients indicated for cardiac imaging and 100 healthy volunteers recruited prospectively. The difference between the dimensionless number and its critical threshold was calculated for every subject from their earliest MRI data and used as an aneurysm physiomarker to forecast future growth. As a binary predictor for abnormal growth and subsequent surgical intervention reported from follow-up imaging, the aneurysm physiomarker yielded an AUC of 0.997 in a receiving operator characteristic analysis. Though validated here for thoracic ascending aortic aneurysms, this instability mechanism may be used to understand, predict and inform patient-specific treatment of aneurysms in any location without fundamental differences. △ Less

Submitted 7 August, 2023; v1 submitted 18 November, 2021; originally announced November 2021.

Journal ref: Nat. Biomed. Eng 7, 1614-1626 (2023)

Characterization of a high bandwidth readout chain for the CMS Phase-2 pixel upgrade

Authors: Caleb Smith

Abstract: The CMS collaboration is building a new inner tracking pixel detector for the High-Luminosity LHC. Each pixel readout chip will be controlled with a single serial input stream at 160 Mbps and will send out data via four current mode logic (CML) 1.28 Gbps outputs. The readout chips will be grouped in modules and connected with up to 1.6 meters long low-mass electrical links to Low-Power Gigabit Tra… ▽ More The CMS collaboration is building a new inner tracking pixel detector for the High-Luminosity LHC. Each pixel readout chip will be controlled with a single serial input stream at 160 Mbps and will send out data via four current mode logic (CML) 1.28 Gbps outputs. The readout chips will be grouped in modules and connected with up to 1.6 meters long low-mass electrical links to Low-Power Gigabit Transceivers (lpGBT) and Versatile Link PLUS Transceiver (VTRx+) modules that send the data optically to off-detector electronics at 10 Gbps. The characterization of these components and system tests of the readout chain are presented. △ Less

Submitted 1 September, 2022; v1 submitted 26 October, 2021; originally announced October 2021.

Comments: Proceedings on the Topical Workshop on Electronics for Particle Physics, TWEPP 2021

Extracting Quantitative Dielectric Properties from Pump-Probe Spectroscopy

Authors: Arjun Ashoka, Ronnie R. Tamming, Aswathy V. Girija, Hope Bretscher, Sachin Dev Verma, Shang-Da Yang, Chih-Hsuan Lu, Justin M. Hodgkiss, David Ritchie, Chong Chen, Charles G. Smith, Christoph Schnedermann, Michael B. Price, Kai Chen, Akshay Rao

Abstract: Optical pump-probe spectroscopy is a powerful tool for the study of non-equilibrium electronic dynamics and finds wide applications across a range of fields, from physics and chemistry to material science and biology. However, a shortcoming of conventional pump-probe spectroscopy is that photoinduced changes in transmission, reflection and scattering can simultaneously contribute to the measured d… ▽ More Optical pump-probe spectroscopy is a powerful tool for the study of non-equilibrium electronic dynamics and finds wide applications across a range of fields, from physics and chemistry to material science and biology. However, a shortcoming of conventional pump-probe spectroscopy is that photoinduced changes in transmission, reflection and scattering can simultaneously contribute to the measured differential spectra, leading to ambiguities in assigning the origin of spectral signatures and ruling out quantitative interpretation of the spectra. Ideally, these methods would measure the underlying dielectric function (or the complex refractive index) which would then directly provide quantitative information on the transient excited state dynamics free of these ambiguities. Here we present and test a model independent route to transform differential transmission or reflection spectra, measured via conventional optical pump-probe spectroscopy, to changes in the quantitative transient dielectric function. We benchmark this method against changes in the real refractive index measured using time-resolved Frequency Domain Interferometry in prototypical inorganic and organic semiconductor films. Our methodology can be applied to existing and future pump-probe data sets, allowing for an unambiguous and quantitative characterisation of the transient photoexcited spectra of materials. This in turn will accelerate the adoption of pump-probe spectroscopy as a facile and robust materials characterisation and screening tool. △ Less

Submitted 24 August, 2021; originally announced August 2021.

Active terahertz modulator and slow light metamaterial devices with hybrid graphene-superconductor photonic integrated circuits

Authors: Samane Kalhor, Stephan J. Kindness, Robert Wallis, Harvey E. Beere, Majid Ghanaatshoar, Riccardo Degl'Innocenti, Michael J. Kelly, Stephan Hofmann, Charles G. Smith, Hannah J. Joyce, David A. Ritchie, Kaveh Delfanazari

Abstract: Metamaterial photonic integrated circuits with arrays of hybrid graphene-superconductor coupled split-ring resonators (SRR) capable of modulating and slowing down terahertz (THz) light are introduced and proposed. The hybrid device optical responses, such as electromagnetic induced transparency (EIT) and group delay, can be modulated in several ways. First, it is modulated electrically by changing… ▽ More Metamaterial photonic integrated circuits with arrays of hybrid graphene-superconductor coupled split-ring resonators (SRR) capable of modulating and slowing down terahertz (THz) light are introduced and proposed. The hybrid device optical responses, such as electromagnetic induced transparency (EIT) and group delay, can be modulated in several ways. First, it is modulated electrically by changing the conductivity and carrier concentrations in graphene. Alternatively, the optical response can be modified by acting on the device temperature sensitivity, by switching Nb from a lossy normal phase to a low-loss quantum mechanical phase below the transition temperature (Tc) of Nb. Maximum modulation depths of 57.3 % and 97.61 % are achieved for EIT and group delay at the THz transmission window, respectively. A comparison is carried out between the Nb-graphene-Nb coupled SRR-based devices with those of Au-graphene-Au SRRs and a significant enhancement of the THz transmission, group delay, and EIT responses are observed when Nb is in the quantum mechanical phase. Such hybrid devices with their reasonably large and tunable slow light bandwidth pave the way for the realization of active optoelectronic modulators, filters, phase shifters, and slow light devices for applications in chip-scale quantum communication and quantum processing. △ Less

Submitted 8 July, 2021; originally announced July 2021.

High-speed hyperspectral four-wave-mixing microscopy with frequency combs

Authors: Brad C. Smith, Bachana Lomsadze, Steven T. Cundiff

Abstract: A four-wave-mixing, frequency-comb-based, hyperspectral imaging technique that is spectrally precise, potentially rapid, and can in principle be applied to any material, is demonstrated in a near-diffraction-limited microscopy application. A four-wave-mixing, frequency-comb-based, hyperspectral imaging technique that is spectrally precise, potentially rapid, and can in principle be applied to any material, is demonstrated in a near-diffraction-limited microscopy application. △ Less

Submitted 26 April, 2021; v1 submitted 23 April, 2021; originally announced April 2021.

Journal ref: Optics Letters 46, 3556-3559 (2021)

Exact $k$-body representation of the Jaynes-Cummings interaction in the dressed basis: Insight into many-body phenomena with light

Authors: Kevin C. Smith, Aniruddha Bhattacharya, David J. Masiello

Abstract: Analog quantum simulation - the technique of using one experimentally well-controlled physical system to mimic the behavior of another - has quickly emerged as one of the most promising near term strategies for studying strongly correlated quantum many-body systems. In particular, systems of interacting photons, realizable in solid-state cavity and circuit QED frameworks, for example, hold tremend… ▽ More Analog quantum simulation - the technique of using one experimentally well-controlled physical system to mimic the behavior of another - has quickly emerged as one of the most promising near term strategies for studying strongly correlated quantum many-body systems. In particular, systems of interacting photons, realizable in solid-state cavity and circuit QED frameworks, for example, hold tremendous promise for the study of nonequilibrium many-body phenomena due to the capability to locally create and destroy photons. These systems are typically modeled using a Jaynes-Cummings-Hubbard (JCH) Hamiltonian, named due to similarities with the Bose-Hubbard (BH) model. Here, we present a non-perturbative procedure for transforming the JC Hamiltonian into a dressed operator representation that, in its most general form, admits an infinite sum of bosonic $k$-body terms where $k$ is bound only by the number of excitations in the system. We closely examine this result in both the dispersive and resonant coupling regimes, finding rapid convergence in the former and contributions from $k\gg1$ in the latter. Through extension to a two-site JCH system, we demonstrate that this approach facilitates close inspection of the analogy between the JCH and BH models and its breakdown for resonant light-matter coupling. Finally, we use this framework to survey the many-body character of a two-site JCH for general system parameters, identifying four unique quantum phases and the parameter regimes in which they are realized, thus highlighting phenomena realizable with finite JCH-based quantum simulators beyond the BH model. More broadly, this work is intended to serve as a clear mathematical exposition of bosonic many-body interactions underlying JC-type systems, often postulated through analogy to Kerr-like nonlinear susceptibilities or by matching coefficients to obtain the appropriate eigenvalue spectrum. △ Less

Submitted 12 March, 2021; originally announced March 2021.

Comments: 25 pages, 6 figures

Journal ref: Phys. Rev. A 104, 013707 (2021)

Study of energy response and resolution of the ATLAS Tile Calorimeter to hadrons of energies from 16 to 30 GeV

Authors: Jalal Abdallah, Stylianos Angelidakis, Giorgi Arabidze, Nikolay Atanov, Johannes Bernhard, Romeo Bonnefoy, Jonathan Bossio, Ryan Bouabid, Fernando Carrio, Tomas Davidek, Michal Dubovsky, Luca Fiorini, Francisco Brandan Garcia Aparisi, Tancredi Carli, Alexander Gerbershagen, Hazal Goksu, Haleh Hadavand, Siarhei Harkusha, Dingane Hlaluku, Michael James Hibbard, Kevin Hildebrand, Juansher Jejelava, Andrey Kamenshchikov, Stergios Kazakos, Tomas Kello , et al. (46 additional authors not shown)

Abstract: Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The measurements of the energy response and resolution of the detector to positive pions and kaons and protons with energy in the range 16 to 30 GeV are reported. The results have uncertainties of few percent. They were compared to the predictions of the Geant… ▽ More Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The measurements of the energy response and resolution of the detector to positive pions and kaons and protons with energy in the range 16 to 30 GeV are reported. The results have uncertainties of few percent. They were compared to the predictions of the Geant4-based simulation program used in ATLAS to estimate the response of the detector to proton-proton events at Large Hadron Collider. The determinations obtained using experimental and simulated data agree within the uncertainties. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Measurement of Ac227 Impurity in Ac225 using Decay Energy Spectroscopy

Authors: Aidan D. Tollefson, Chandler M. Smith, Matthew H. Carpenter, Mark P. Croce, Michael E. Fassbender, Katrina E. Koehler, Laura M. Lilley, Ellen M. O'Brien, Daniel R. Schmidt, Benjamin W. Stein, Joel N. Ullom, Michael D. Yoho, David J. Mercer

Abstract: 225Ac is a valuable medical radionuclide for targeted alpha therapy, but 227Ac is an undesirable byproduct of an accelerator-based synthesis method under investigation. Sufficient detector sensitivity is critical for quantifying the trace impurity of 227Ac, with the 227Ac/225Ac activity ratio predicted to be approximately 0.15% by end-of-bombardment (EOB). Superconducting transition edge sensor (T… ▽ More 225Ac is a valuable medical radionuclide for targeted alpha therapy, but 227Ac is an undesirable byproduct of an accelerator-based synthesis method under investigation. Sufficient detector sensitivity is critical for quantifying the trace impurity of 227Ac, with the 227Ac/225Ac activity ratio predicted to be approximately 0.15% by end-of-bombardment (EOB). Superconducting transition edge sensor (TES) microcalorimeters offer high resolution energy spectroscopy using the normal-to-superconducting phase transition to measure small change in temperature. By embedding 225Ac production samples in a gold foil thermally coupled to a TES microcalorimeter we can measure the decay energies of the radionuclides embedded with high resolution and efficiency. This technique, known as decay energy spectroscopy (DES), collapses several peaks from alpha decays into single Q-value peaks. In practice there are more complex factors in the interpretation of data using DES, which we will discuss herein. Using this technique we measured the EOB 227Ac impurity to be (0.142 +/- 0.005)% for a single production sample. This demonstration has shown that DES can distinguish closely related isotopic features and is a useful tool for quantitative measures. △ Less

Submitted 3 February, 2021; originally announced February 2021.

Comments: 13 pages, 11 figures. Reported on in Applied Superconductivity Conference 2020

Ubiquitous Dynamical Time Asymmetry in Measurements on Materials and Biological Systems

Authors: Alessio Lapolla, Jeremy C. Smith, Aljaž Godec

Abstract: Many measurements on soft condensed matter (e.g., biological and materials) systems track low-dimensional observables projected from the full system phase space as a function of time. Examples are dynamic structure factors, spectroscopic and rheological response functions, and time series of distances derived from optical tweezers, single-molecule spectroscopy and molecular dynamics simulations. I… ▽ More Many measurements on soft condensed matter (e.g., biological and materials) systems track low-dimensional observables projected from the full system phase space as a function of time. Examples are dynamic structure factors, spectroscopic and rheological response functions, and time series of distances derived from optical tweezers, single-molecule spectroscopy and molecular dynamics simulations. In many such systems the projection renders the reduced dynamics non-Markovian and the observable is not prepared in, or initially sampled from and averaged over, a stationary distribution. We prove that such systems always exhibit non-equilibrium, time asymmetric dynamics. That is, they evolve in time with a broken time-translation invariance in a manner closely resembling aging dynamics. We identify the entropy associated with the breaking of time-translation symmetry that is a measure of the instantaneous thermodynamic displacement of latent, hidden degrees of freedom from their stationary state. Dynamical time asymmetry is a general phenomenon, independent of the underlying energy surface, and is frequently even visible in measurements on systems that have fully reached equilibrium. This finding has fundamental implications for the interpretation of many experiments on, and simulations of, biological and materials systems. △ Less

Submitted 2 February, 2021; originally announced February 2021.

Simple Single-Section Diode Frequency Combs

Authors: Matthew. W. Day, Mark Dong, Bradley C. Smith, Rachel C. Owen, Grace C. Kerber, Taigao Ma, Herbert G. Winful, Steven T. Cundiff

Abstract: Frequency combs, broadband light sources whose spectra consist of coherent, discrete modes, have become essential in many fields. Miniaturizing frequency combs would be a significant advance in these fields, enabling the deployment of frequency-comb based devices for diverse measurement and spectroscopy applications. We demonstrate diode-laser based frequency comb generators. These laser diodes ar… ▽ More Frequency combs, broadband light sources whose spectra consist of coherent, discrete modes, have become essential in many fields. Miniaturizing frequency combs would be a significant advance in these fields, enabling the deployment of frequency-comb based devices for diverse measurement and spectroscopy applications. We demonstrate diode-laser based frequency comb generators. These laser diodes are simple, electrically pumped, inexpensive and readily manufactured. Each chip contains several dozen diode-laser combs. We measure the time-domain output of a diode frequency comb to reveal the underlying frequency dynamics responsible for the comb spectrum, conduct dual comb spectroscopy of a molecular gas with two devices on the same chip, and demonstrate that these combs can be battery powered. △ Less

Submitted 14 October, 2020; originally announced October 2020.

Journal ref: APL Photonics 5, 121303 (2020)

The blending region hybrid framework for the simulation of stochastic reaction-diffusion processes

Authors: Christian A. Yates, Adam George, Armand Jordana, Cameron A. Smith, Andrew B. Duncan, Konstantinos C. Zygalakis

Abstract: The simulation of stochastic reaction-diffusion systems using fine-grained representations can become computationally prohibitive when particle numbers become large. If particle numbers are sufficiently high then it may be possible to ignore stochastic fluctuations and use a more efficient coarse-grained simulation approach. Nevertheless, for multiscale systems which exhibit significant spatial va… ▽ More The simulation of stochastic reaction-diffusion systems using fine-grained representations can become computationally prohibitive when particle numbers become large. If particle numbers are sufficiently high then it may be possible to ignore stochastic fluctuations and use a more efficient coarse-grained simulation approach. Nevertheless, for multiscale systems which exhibit significant spatial variation in concentration, a coarse-grained approach may not be appropriate throughout the simulation domain. Such scenarios suggest a hybrid paradigm in which a computationally cheap, coarse-grained model is coupled to a more expensive, but more detailed fine-grained model enabling the accurate simulation of the fine-scale dynamics at a reasonable computational cost. In this paper, in order to couple two representations of reaction-diffusion at distinct spatial scales, we allow them to overlap in a "blending region". Both modelling paradigms provide a valid representation of the particle density in this region. From one end of the blending region to the other, control of the implementation of diffusion is passed from one modelling paradigm to another through the use of complementary "blending functions" which scale up or down the contribution of each model to the overall diffusion. We establish the reliability of our novel hybrid paradigm by demonstrating its simulation on four exemplar reaction-diffusion scenarios. △ Less

Submitted 30 September, 2020; originally announced October 2020.

Comments: 36 pages, 30 figures

Design of the ALPS II Optical System

Authors: M. Diaz Ortiz, J. Gleason, H. Grote, A. Hallal, M. T. Hartman, H. Hollis, K. S. Isleif, A. James, K. Karan, T. Kozlowski, A. Lindner, G. Messineo, G. Mueller, J. H. Poeld, R. C. G. Smith, A. D. Spector, D. B. Tanner, L. -W. Wei, B. Willke

Abstract: The Any Light Particle Search II (ALPS II) is an experiment currently being built at DESY in Hamburg, Germany, that will use a light-shining-through-a-wall (LSW) approach to search for axion-like particles. ALPS II represents a significant step forward for these types of experiments as it will use 24 superconducting dipole magnets, along with dual, high-finesse, 122 m long optical cavities. This p… ▽ More The Any Light Particle Search II (ALPS II) is an experiment currently being built at DESY in Hamburg, Germany, that will use a light-shining-through-a-wall (LSW) approach to search for axion-like particles. ALPS II represents a significant step forward for these types of experiments as it will use 24 superconducting dipole magnets, along with dual, high-finesse, 122 m long optical cavities. This paper gives the first comprehensive recipe for the realization of the idea, proposed over 30 years ago, to use optical cavities before and after the wall to increase the power of the regenerated photon signal. The experiment is designed to achieve a sensitivity to the coupling between axion-like particles and photons down to g=2e-11 1/GeV for masses below 0.1 meV, more than three orders of magnitude beyond the sensitivity of previous laboratory experiments. The layout and main components that define ALPS II are discussed along with plans for reaching design sensitivity. An accompanying paper (Hallal, et al [1]) offers a more in-depth description of the heterodyne detection scheme, the first of two independent detection systems that will be implemented in ALPS II. △ Less

Submitted 21 December, 2021; v1 submitted 29 September, 2020; originally announced September 2020.

Comments: 26 pages, 5 figures

Report number: DESY 20-158

Improved Plutonium and Americium Photon Branching Ratios from Microcalorimeter Gamma Spectroscopy

Authors: Michael D. Yoho, Katrina E. Koehler, Daniel T. Becker, Douglas A. Bennett, Matthew H. Carpenter, Mark P. Croce, Johnathon D. Gard, J. A. Ben Mates, David J. Mercer, Nathan J. Ortiz, Daniel R. Schmidt, Chandler M. Smith, Daniel S. Swetz, Aidan D. Tollefson, Joel N. Ullom, Leila R. Vale, Abigail L. Wessels, Duc T. Vo

Abstract: Photon branching ratios are critical input data for activities such as nuclear materials protection and accounting because they allow material compositions to be extracted from measurements of gamma-ray intensities. Uncertainties in these branching ratios are often a limiting source of uncertainty in composition determination. Here, we use high statistics, high resolution (~60-70eV full-width-at-h… ▽ More Photon branching ratios are critical input data for activities such as nuclear materials protection and accounting because they allow material compositions to be extracted from measurements of gamma-ray intensities. Uncertainties in these branching ratios are often a limiting source of uncertainty in composition determination. Here, we use high statistics, high resolution (~60-70eV full-width-at-half-maximum at 100 keV) gamma-ray spectra acquired using microcalorimeter sensors to substantially reduce the uncertainties for 11 plutonium (238Pu,239Pu,241Pu) and 241Am branching ratios important for material control and accountability and nuclear forensics in the energy range of 125 keV to 208 keV. We show a reduction in uncertainty of over a factor of three for one branching ratio and a factor of 2{3 for four branching ratios. △ Less

Submitted 22 June, 2020; v1 submitted 20 May, 2020; originally announced May 2020.

Comments: 25 pages, 6 figures, 7 tables

Report number: LA-UR-19-31885

Evaluating the leeway coefficient for different ocean drifters using operational models

Authors: Graig Sutherland, Nancy Soontiens, Fraser Davidson, Gregory C. Smith, Natacha Bernier, Hauke Blanken, Douglas Schillinger, Guillaume Marcotte, Johannes Röhrs, Knut-Frode Dagestad, Kai H. Christensen, Oyvind Breivik

Abstract: The water following characteristics of six different drifter types are investigated using two different operational marine environmental prediction systems: one produced by Environment and Climate Change Canada (ECCC) and the other produced by the Norwegian Meteorological Institute (METNO). These marine prediction systems include ocean circulation models, atmospheric models, and surface wave model… ▽ More The water following characteristics of six different drifter types are investigated using two different operational marine environmental prediction systems: one produced by Environment and Climate Change Canada (ECCC) and the other produced by the Norwegian Meteorological Institute (METNO). These marine prediction systems include ocean circulation models, atmospheric models, and surface wave models. Two leeway models are tested for use in drift object prediction: an implicit leeway model where the Stokes drift is implicit in the leeway coefficient, and an explicit leeway model where the Stokes drift is provided by the wave model. Both leeway coefficients are allowed to vary in direction and time in order to perfectly reproduce the observed drifter trajectory. This creates a time series of the leeway coefficients which exactly reproduce the observed drifter trajectories. Mean values for the leeway coefficients are consistent with previous studies which utilized direct observations of the leeway. For all drifters and models, the largest source of variance in the leeway coefficient occurs at the inertial frequency and the evidence suggests it is related to uncertainties in the ocean inertial currents. △ Less

Submitted 19 May, 2020; originally announced May 2020.

Comments: 15 pages with 8 figs + supplementary material consisting of 8 pages with 8 figures

World ships: Feasibility and Rationale

Authors: Andreas M. Hein, Cameron Smith, Frédéric Marin, Kai Staats

Abstract: World ships are hypothetical, large, self-contained spacecraft for crewed interstellar travel, taking centuries to reach other stars. Due to their crewed nature, size, and long trip times, the feasibility of world ships faces an additional set of challenges compared to interstellar probes. Despite their emergence in the 1980s, most of these topics remain unexplored. This article revisits some of t… ▽ More World ships are hypothetical, large, self-contained spacecraft for crewed interstellar travel, taking centuries to reach other stars. Due to their crewed nature, size, and long trip times, the feasibility of world ships faces an additional set of challenges compared to interstellar probes. Despite their emergence in the 1980s, most of these topics remain unexplored. This article revisits some of the key feasibility issues of world ships. First, definitions of world ships from the literature are revisited and the notion of world ship positioned with respect to similar concepts such as generation ships. Second, the key question of population size is revisited in light of recent results from the literature. Third, socio-technical and economic feasibility issues are evaluated. Finally, world ships are compared to potential alternative modes of crewed interstellar travel. Key roadblocks for world ships are the considerable resources required, shifting its economic feasibility beyond the year 2300, and the development of a maintenance system capable of detecting, replacing, and repairing several components per second. The emergence of alternative, less costly modes of crewed interstellar travel at an earlier point in time might render world ships obsolete. △ Less

Submitted 12 May, 2020; v1 submitted 23 April, 2020; originally announced May 2020.

Journal ref: Acta Futura, 12, 75-104, 2020

Design and Beam Test Results for the 2D Projective sPHENIX Electromagnetic Calorimeter Prototype

Authors: C. A. Aidala, S. Altaf, R. Belmont, S. Boose, D. Cacace, M. Connors, E. Desmond, J. Frantz, E. A. Gamez, N. Grau, J. S. Haggerty, A. Hodges, J. Huang, Y. Kim, M. D. Lenz, W. Lenz, N. A. Lewis, E. J. Mannel, J. D. Osborn, D. V. Perepelitsa, M. Phipps, R. Pisani, S. Polizzo, A. Pun, M. L. Purschke , et al. (13 additional authors not shown)

Abstract: sPHENIX is a new experiment under construction for the Relativistic Heavy Ion Collider at Brookhaven National Laboratory which will study the quark-gluon plasma to further the understanding of QCD matter and interactions. A prototype of the sPHENIX electromagnetic calorimeter (EMCal) was tested at the Fermilab Test Beam Facility in Spring 2018 as experiment T-1044. The EMCal prototype corresponds… ▽ More sPHENIX is a new experiment under construction for the Relativistic Heavy Ion Collider at Brookhaven National Laboratory which will study the quark-gluon plasma to further the understanding of QCD matter and interactions. A prototype of the sPHENIX electromagnetic calorimeter (EMCal) was tested at the Fermilab Test Beam Facility in Spring 2018 as experiment T-1044. The EMCal prototype corresponds to a solid angle of $ Δη\times Δφ= 0.2 \times 0.2$ centered at pseudo-rapidity $η= 1$. The prototype consists of scintillating fibers embedded in a mix of tungsten powder and epoxy. The fibers project back approximately to the center of the sPHENIX detector, giving 2D projectivity. The energy response of the EMCal prototype was studied as a function of position and input energy. The energy resolution of the EMCal prototype was obtained after applying a position dependent energy correction and a beam profile correction. Two separate position dependent corrections were considered. The EMCal energy resolution was found to be $σ(E)/\langle E\rangle = 3.5(0.1) \oplus 13.3(0.2)/\sqrt{E}$ based on the hodoscope position dependent correction, and $σ(E)/\langle E\rangle = 3.0(0.1) \oplus 15.4(0.3)/\sqrt{E}$ based on the cluster position dependent correction. These energy resolution results meet the requirements of the sPHENIX physics program. △ Less

Submitted 15 March, 2021; v1 submitted 27 March, 2020; originally announced March 2020.

Comments: 9 pages, 9 figures, 3 tables. Published in IEEE Transactions on Nuclear Science (vol. 68, no. 2, pp. 173-181, Feb. 2021). Revisions over previous version in response to referee and editor comments

Journal ref: IEEE Transactions on Nuclear Science, vol. 68, no. 2, pp. 173-181, Feb. 2021

Develo** a Resilient, Robust and Efficient Supply Network in Africa

Authors: Bruce A. Cox, Christopher M. Smith, Timothy W. Breitbach, Jade F. Baker, Paul P. Rebeiz

Abstract: Supply chains need to balance competing objectives; in addition to efficiency they need to be resilient to adversarial and environmental interference, and robust to uncertainties in long term demand. Significant research has been conducted designing efficient supply chains, and recent research has focused on resilient supply chain design. However, the integration of resilient and robust supply cha… ▽ More Supply chains need to balance competing objectives; in addition to efficiency they need to be resilient to adversarial and environmental interference, and robust to uncertainties in long term demand. Significant research has been conducted designing efficient supply chains, and recent research has focused on resilient supply chain design. However, the integration of resilient and robust supply chain design is less well studied. This paper develops a method to include resilience and robustness into supply chain design. Using the region of West Africa, which is plagued with persisting logistical issues, we develop a regional risk assessment framework, then apply categorical risk to the countries of West Africa using publicly available data. Next, we develop a mathematical model leveraging this framework to design a resilient supply network that minimizes cost while ensuring the network functions following a disruption. Finally, we examine the network's robustness to demand uncertainty via several plausible emergency scenarios. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Nonlinearity in the Lorentz Oscillator Model

Authors: Brad C. Smith

Abstract: The magnetic force is retained in the Lorentz Oscillator Model and a perturbation solution is derived beyond the dipole approximation. Perturbation series for the electric dipole, magnetic dipole, and electric quadrupole moments in addition to their macroscopic, spatially-averaged counterparts are also obtained. These expressions are shown to describe many optical phenomena: the normal, linear Zee… ▽ More The magnetic force is retained in the Lorentz Oscillator Model and a perturbation solution is derived beyond the dipole approximation. Perturbation series for the electric dipole, magnetic dipole, and electric quadrupole moments in addition to their macroscopic, spatially-averaged counterparts are also obtained. These expressions are shown to describe many optical phenomena: the normal, linear Zeeman, Faraday, and magneto-optic Kerr effects, the linear Stark, Pockels, and Kerr effects (when the restoring force is anharmonic), the momentum and angular momentum of a photon in matter (contributing to the Abraham-Minkowski debate), the photon drag and inverse Faraday effects, and sum-frequency and second-harmonic generation in centrosymmetric media. The qualitative and quantitative accuracy is assessed by comparison to both experiment and more fundamental theory (e.g. quantum mechanics). New insights into the relationship between the Stark and Pockels/Kerr effects also emerge. △ Less

Submitted 16 January, 2020; originally announced January 2020.

Charting the European Course to the High-Energy Frontier

Authors: U. Amaldi, E. Aslanides, R. Barate, C. Benvenuti, P. Bloch, T. Camporesi, A. David, D. Denegri, M. Diemoz, L. Di Lella, G. Dissertori, N. Doble, J. Dumarchez, J. Ellis, J. Engelen, C. Fabjan, B. Fuks, P. Gavillet, A. Hoecker, J. Iliopoulos, P. Innocenti, W. Kozanecki, P. Lebrun, C. Llewellyn Smith, C. Lourenço , et al. (28 additional authors not shown)

Abstract: We review the capabilities of two projects that have been proposed as the next major European facility, for consideration in the upcoming update of the European Strategy for Particle Physics: CLIC and FCC. We focus on their physics potentials and emphasise the key differences between the linear or circular approaches. We stress the uniqueness of the FCC-ee programme for precision electroweak physi… ▽ More We review the capabilities of two projects that have been proposed as the next major European facility, for consideration in the upcoming update of the European Strategy for Particle Physics: CLIC and FCC. We focus on their physics potentials and emphasise the key differences between the linear or circular approaches. We stress the uniqueness of the FCC-ee programme for precision electroweak physics at the $Z$ peak and the $WW$ threshold, as well as its unequalled statistics for Higgs physics and high accuracy for observing possible new phenomena in Higgs and $Z$ decays, whereas CLIC and FCC-ee offer similar capabilities near the $t \overline t$ threshold. Whilst CLIC offers the possibility of energy upgrades to 1500 and 3000 GeV, FCC-ee paves the way for FCC-hh. The latter offers unique capabilities for making direct or indirect discoveries in a new energy range, and has the highest sensitivity to the self-couplings of the Higgs boson and any anomalous couplings. We consider the FCC programme to be the best option to maintain Europe's place at the high-energy frontier during the coming decades. △ Less

Submitted 31 December, 2019; originally announced December 2019.

Comments: Contribution to the update of the European Strategy for Particle Physics

Active tuning of hybridized modes in a heterogeneous photonic molecule

Authors: Kevin C. Smith, Yueyang Chen, Arka Majumdar, David J. Masiello

Abstract: From fundamental discovery to practical application, advances in the optical and quantum sciences rely upon precise control of light-matter interactions. Systems of coupled optical cavities are ubiquitous in these efforts, yet design and active modification of the hybridized mode properties remains challenging. In this Letter, we demonstrate the ability to thermally control the degree of hybridiza… ▽ More From fundamental discovery to practical application, advances in the optical and quantum sciences rely upon precise control of light-matter interactions. Systems of coupled optical cavities are ubiquitous in these efforts, yet design and active modification of the hybridized mode properties remains challenging. In this Letter, we demonstrate the ability to thermally control the degree of hybridization in a heterogeneous photonic molecule composed of a ring resonator strongly coupled to a nanobeam photonic crystal cavity. Combining theory and experiment, we show that the composition of the resulting super-modes can be actively tailored and we derive temperature-dependent analytic expressions for the super-mode profiles, frequencies, and volumes. This work illustrates the potential for actively tunable, designer photonic properties using heterogeneous optical cavity devices. △ Less

Submitted 17 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. Applied 13, 044041 (2020)

Biophysics-based critique of the assisted discharge mechanism hypothesis

Authors: Julie V. Stern, Thiruvallur R. Gowrishankar, Kyle C. Smith, James C. Weaver

Abstract: Cell experiments with large, short electric field pulses of opposite polarity reveal a remarkable phenomenon: Bipolar cancellation (BPC). Typical defining experiments involve quantitative observation of tracer molecule influx at times of order 100 s post pulsing. Gowrishankar et al. BBRC 2018 503:1194-1199 shows that long-lived pores and altered partitioning or hindrance due to inserted occluding… ▽ More Cell experiments with large, short electric field pulses of opposite polarity reveal a remarkable phenomenon: Bipolar cancellation (BPC). Typical defining experiments involve quantitative observation of tracer molecule influx at times of order 100 s post pulsing. Gowrishankar et al. BBRC 2018 503:1194-1199 shows that long-lived pores and altered partitioning or hindrance due to inserted occluding molecules can account for BPC. In stark contrast, the Assisted Discharge (AD) hypothesis, Pakhomov et al. CellMol- LifeSci 2014 71(22):4431-4441; Fig. 6, only involves early times of a microsecond down to nanoseconds. Further, well established terminology for cell membrane discharge relates to membrane potential decays shortly after pulsing. Discharge is silent on molecular or ionic transport, and does not address the fact that tracer molecule uptake vs time is measure at about 100s after pulsing ceases. Our critique of AD notes that there can be an association of AD with BPC, but associations are only necessary, not sufficient. A BPC mechanism hypothesis must be shown to be causal, able to describe time-dependent molecular influx. The two hypotheses involve very different time-scales (less than a microsecond vs 100 s) and very different quantities (volts/s vs molecules/s). Unlike pore-based hypotheses the AD hypothesis lacks explicit molecular transport mechanisms, and does not address the greatly delayed measured molecular uptake. We conclude that AD is an implausible candidate for explaining BPC. △ Less

Submitted 1 April, 2019; originally announced April 2019.

Comments: Version 01

USID and Pycroscopy -- Open frameworks for storing and analyzing spectroscopic and imaging data

Authors: Suhas Somnath, Chris R. Smith, Nouamane Laanait, Rama K. Vasudevan, Anton Ievlev, Alex Belianinov, Andrew R. Lupini, Mallikarjun Shankar, Sergei V. Kalinin, Stephen Jesse

Abstract: Materials science is undergoing profound changes due to advances in characterization instrumentation that have resulted in an explosion of data in terms of volume, velocity, variety and complexity. Harnessing these data for scientific research requires an evolution of the associated computing and data infrastructure, bridging scientific instrumentation with super- and cloud- computing. Here, we de… ▽ More Materials science is undergoing profound changes due to advances in characterization instrumentation that have resulted in an explosion of data in terms of volume, velocity, variety and complexity. Harnessing these data for scientific research requires an evolution of the associated computing and data infrastructure, bridging scientific instrumentation with super- and cloud- computing. Here, we describe Universal Spectroscopy and Imaging Data (USID), a data model capable of representing data from most common instruments, modalities, dimensionalities, and sizes. We pair this schema with the hierarchical data file format (HDF5) to maximize compatibility, exchangeability, traceability, and reproducibility. We discuss a family of community-driven, open-source, and free python software packages for storing, processing and visualizing data. The first is pyUSID which provides the tools to read and write USID HDF5 files in addition to a scalable framework for parallelizing data analysis. The second is Pycroscopy, which provides algorithms for scientific analysis of nanoscale imaging and spectroscopy modalities and is built on top of pyUSID and USID. The instrument-agnostic nature of USID facilitates the development of analysis code independent of instrumentation and task in Pycroscopy which in turn can bring scientific communities together and break down barriers in the age of open-science. The interested reader is encouraged to be a part of this ongoing community-driven effort to collectively accelerate materials research and discovery through the realms of big data. △ Less

Submitted 27 March, 2019; v1 submitted 22 March, 2019; originally announced March 2019.

[Plasma 2020 Decadal] The essential role of multi-point measurements in turbulence investigations: the solar wind beyond single scale and beyond the Taylor Hypothesis

Authors: W. H. Matthaeus, R. Bandyopadhyay, M. R. Brown, J. Borovsky, V. Carbone, D. Caprioli, A. Chasapis, R. Chhiber, S. Dasso, P. Dmitruk, L. Del Zanna, P. A. Dmitruk, Luca Franci, S. P. Gary, M. L. Goldstein, D. Gomez, A. Greco, T. S. Horbury, Hantao Ji, J. C. Kasper, K. G. Klein, S. Landi, Hui Li, F. Malara, B. A. Maruca , et al. (24 additional authors not shown)

Abstract: This paper briefly reviews a number of fundamental measurements that need to be made in order to characterize turbulence in space plasmas such as the solar wind. It has long been known that many of these quantities require simultaneous multipoint measurements to attain a proper characterization that would reveal the fundamental physics of plasma turbulence. The solar wind is an ideal plasma for su… ▽ More This paper briefly reviews a number of fundamental measurements that need to be made in order to characterize turbulence in space plasmas such as the solar wind. It has long been known that many of these quantities require simultaneous multipoint measurements to attain a proper characterization that would reveal the fundamental physics of plasma turbulence. The solar wind is an ideal plasma for such an investigation, and it now appears to be technologically feasible to carry out such an investigation, following the pioneering Cluster and MMS missions. Quantities that need to be measured using multipoint measurements include the two-point, two-time second correlation function of velocity, magnetic field and density, and higher order statistical objects such as third and fourth order structure functions. Some details of these requirements are given here, with a eye towards achieving closure on fundamental questions regarding the cascade rate, spectral anisotropy, characteristic coherent structures, intermittency, and dissipation mechanisms that describe plasma turbuelence, as well as its variability with plasma parameters in the solar wind. The motivation for this discussion is the current planning for a proposed Helioswarm mission that would be designed to make these measurements,leading to breakthrough understanding of the physics of space and astrophysical turbulence. △ Less

Submitted 16 March, 2019; originally announced March 2019.

Comments: White paper submitted to the PLASMA 2020 Decadal Survey Committee

Model input and output dimension reduction using Karhunen Loève expansions with application to biotransport

Authors: Alen Alexanderian, William Reese, Ralph C. Smith, Meilin Yu

Abstract: We consider biotransport in tumors with uncertain heterogeneous material properties. Specifically, we focus on the elliptic partial differential equation (PDE) modeling the pressure field inside the tumor. The permeability field is modeled as a log-Gaussian random field with a prespecified covariance function. We numerically explore dimension reduction of the input parameter and model output. Trun… ▽ More We consider biotransport in tumors with uncertain heterogeneous material properties. Specifically, we focus on the elliptic partial differential equation (PDE) modeling the pressure field inside the tumor. The permeability field is modeled as a log-Gaussian random field with a prespecified covariance function. We numerically explore dimension reduction of the input parameter and model output. Truncated Karhunen--Loève (KL) expansions are used to decompose the log-permeability field, as well as the resulting random pressure field. We find that although very high-dimensional representations are needed to accurately represent the permeability field, especially in presence of small correlation lengths, the pressure field is not very sensitive to high-order KL terms of the input parameter. Moreover, we find that the pressure field itself can be represented accurately using a KL expansion with a small number of terms. These observations are used to guide a reduced-order modeling approach to accelerate computational studies of biotransport in tumors. △ Less

Submitted 14 March, 2019; originally announced March 2019.

[Plasma 2020 Decadal] Multipoint Measurements of the Solar Wind: A Proposed Advance for Studying Magnetized Turbulence

Authors: K. G. Klein, O. Alexandrova, J. Bookbinder, D. Caprioli, A. W. Case, B. D. G. Chandran, L. J. Chen, T. Horbury, L. Jian, J. C. Kasper, O. Le Contel, B. A. Maruca, W. Matthaeus, A. Retino, O. Roberts, A. Schekochihin, R. Skoug, C. Smith, J. Steinberg, H. Spence, B. Vasquez, J. M. TenBarge, D. Verscharen, P. Whittlesey

Abstract: A multi-institutional, multi-national science team will soon submit a NASA proposal to build a constellation of spacecraft to fly into the near-Earth solar wind in a swarm spanning a multitude of scales in order to obtain critically needed measurements that will reveal the underlying dynamics of magnetized turbulence. This white paper, submitted to the Plasma 2020 Decadal Survey Committee, provide… ▽ More A multi-institutional, multi-national science team will soon submit a NASA proposal to build a constellation of spacecraft to fly into the near-Earth solar wind in a swarm spanning a multitude of scales in order to obtain critically needed measurements that will reveal the underlying dynamics of magnetized turbulence. This white paper, submitted to the Plasma 2020 Decadal Survey Committee, provides a brief overview of turbulent systems that constitute an area of compelling plasma physics research, including why this mission is needed, and how this mission will achieve the goal of revealing how energy is transferred across scales and boundaries in plasmas throughout the universe. △ Less

Submitted 13 August, 2019; v1 submitted 13 March, 2019; originally announced March 2019.

Comments: 6 pages, submitted to the Plasma 2020 Decadal Survey Committee; version 2 includes movie of proposed orbit