-
Fabrication of n+ contact on p-type high pure Ge by cathodic electrodeposition of Li and impedance analysis of n+/p diode at low temperatures
Authors:
Manoranjan Ghosh,
Pravahan Salunke,
Shreyas Pitale,
S. G. Singh,
G. D. Patra,
Shashwati Sen
Abstract:
Fabrication of diode by forming n-type electrical contact on germanium (Ge) and its AC impedance analysis is important for radiation detection in the form of pulses. In this work lithium (Li) metal has been electro-deposited on p-type Ge single crystal from molten lithium nitrate at 260°C. The depth of Li diffusion in Ge was successfully varied by changing the electroplating time as determined by…
▽ More
Fabrication of diode by forming n-type electrical contact on germanium (Ge) and its AC impedance analysis is important for radiation detection in the form of pulses. In this work lithium (Li) metal has been electro-deposited on p-type Ge single crystal from molten lithium nitrate at 260°C. The depth of Li diffusion in Ge was successfully varied by changing the electroplating time as determined by sheet resistance (SR) measurement after successive lap** of Ge surface. Li is found to diffuse up to 500 micron inside Ge by heat treatment of as deposited Li/Ge at 350°C for 1 hour. A stable n-type electrical contact on Ge with SR ~1 ohm/square and impurity concentration ~3.7x10^15/cm^3 is developed by Li incorporation in p-type Ge crystal showing net carrier concentration ~3.4x10^10/cm^3 and SR ~100 Kohm/square. Acceptor concentration determined from the 1/C^2 vs V plot shows similar temperature dependence as found by Hall measurement. The fabricated n+/p junction exhibit ideal diode characteristics with gradual increase in cut off voltage at low temperatures. Under forward bias, junction capacitance mainly comprises of diffusion capacitance (~10 micro.F) showing strong frequency dependence and the impedance is partly resistive resulting in semicircular Cole-Cole plot. Imaginary impedance spectra reveal that the relaxation time for the diffusion of majority carriers decreases at higher temperatures and increased forward voltages. The diode is purely capacitive under reverse bias showing a line parallel to the y-axis in the Cole-Cole plot with frequency independent (100Hz-100MHz) depletion capacitance ~10pF.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Three-Body Recombination of Ultracold Microwave-Shielded Polar Molecules
Authors:
Ian Stevenson,
Shayamal Singh,
Ahmed Elkamshishy,
Niccoló Bigagli,
Weijun Yuan,
Siwei Zhang,
Chris H. Greene,
Sebastian Will
Abstract:
A combined experimental and theoretical study is carried out on the three-body recombination process in a gas of microwave-shielded polar molecules. For ground-state polar molecules dressed with a strong microwave field, field-linked bound states can appear in the intermolecular potential. We model three-body recombination into such bound states using classical trajectory calculations. Our results…
▽ More
A combined experimental and theoretical study is carried out on the three-body recombination process in a gas of microwave-shielded polar molecules. For ground-state polar molecules dressed with a strong microwave field, field-linked bound states can appear in the intermolecular potential. We model three-body recombination into such bound states using classical trajectory calculations. Our results show that recombination can explain the enhanced loss rates observed at small microwave detunings in trapped samples of bosonic NaCs [Bigagli, $\textit{et al.}$, Nat. Phys. $\textbf{19}$ 1579-1584 (2023)]. Specifically, our calculations reproduce the experimentally measured three-body loss rates across a wide range of microwave Rabi couplings, detunings, and temperatures. This work suggests that for bosonic shielded molecular systems in which the two-body loss is sufficiently suppressed and a field-linked bound state is present, the dominant loss process will be three-body recombination.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Optically Pumped Terahertz Amplitude Modulation in Type-II Ge QD/Si heterostructures grown via Molecular Beam Epitaxy
Authors:
Suprovat Ghosh,
Abir Mukherjee,
Sudarshan Singh,
Samit K Ray,
Ananjan Basu,
Santanu Manna,
Samaresh Das
Abstract:
This article exploits group-IV germanium (Ge) quantum dots (QDs) on Silicon-on-Insulator (SOI) grown by molecular beam epitaxy (MBE) in order to explore its optical behaviour in the Terahertz (THz) regime. In this work, Ge QDs, pumped by an above bandgap near infrared wavelength, exhibit THz amplitude modulation in the frequency range of 0.1-1.0 THz. The epitaxial Ge QDs outperform reference SOI s…
▽ More
This article exploits group-IV germanium (Ge) quantum dots (QDs) on Silicon-on-Insulator (SOI) grown by molecular beam epitaxy (MBE) in order to explore its optical behaviour in the Terahertz (THz) regime. In this work, Ge QDs, pumped by an above bandgap near infrared wavelength, exhibit THz amplitude modulation in the frequency range of 0.1-1.0 THz. The epitaxial Ge QDs outperform reference SOI substrate in THz amplitude modulation owing to higher carrier generation in weakly confined dots compared to its bulk counterpart. This is further corroborated using theoretical model based on the non-equilibrium Green's function (NEGF) method. This model enables the calculation of photo carriers generated (PCG) and their confinement in the Ge QD region. Our model also reroutes the calculation from PCG to corresponding plasma frequency and hence to refractive index and THz photo-conductivity. Moreover, the photo-generated confined holes accumulation at the Ge QDs-Si interface is elevated after optical illumination, leading to a decreased THz photo-conductivity. This augmentation in THz photo-conductivity contributes to a significant enhancement of THz modulation depth ~77% at Ge QDs-Si interfaces compared to bare SOI at 0.1 THz.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Active Polar Ring Polymer in Shear Flow -- An Analytical Study
Authors:
Roland G. Winkler,
Sunil P. Singh
Abstract:
We theoretically study the conformational and dynamical properties of semiflexible active polar ring polymers under linear shear flow. A ring is described as a continuous Gaussian polymer with a tangential active force of a constant density along its contour. The linear but non-Hermitian equation of motion is solved using an eigenfunction expansion, which yields activity-independent, but shear-rat…
▽ More
We theoretically study the conformational and dynamical properties of semiflexible active polar ring polymers under linear shear flow. A ring is described as a continuous Gaussian polymer with a tangential active force of a constant density along its contour. The linear but non-Hermitian equation of motion is solved using an eigenfunction expansion, which yields activity-independent, but shear-rate-dependent, relaxation times and activity-dependent frequencies. As a consequence, the ring's stationary-state properties are independent of activity, and its conformations as well as rheological properties are equal to those of a passive ring under shear. The presence of characteristic time scales by the relaxation and the frequency gives rise to a particular dynamical behavior. A tank-treading-like motion emerges for large relaxation times and high frequencies, specifically for stiffer rings, governed by the activity-dependent frequencies. In the case of very flexible polymers, the relaxation behavior dominates over tank-treading. Shear strongly affects the crossover from a tank-treading to a relaxation-time dominated dynamics and suppresses tank-treading. This is reflected in the tumbling frequency, which exhibits two shear-rate dependent regimes, with an activity-dependent plateau at low shear rates followed by a power-law regime with increasing tumbling frequency for large shear rates.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Space-time non-separable dynamics of ultrashort vortex pulse with power exponential spectrum
Authors:
Shakti Singh,
Akhilesh Kumar Mishra
Abstract:
Ultrashort optical pulses with orbital angular momentum (OAM) owing to their various applications in classical as well as quantum domains attract a lot of research attention. The evolution of their spatio-temporal dynamics is of particular interest. In the present work, we numerically explore the spatio-temporal evolution of ultrashort Laguerre Gauss (LG) vortex with power exponential spectrum, al…
▽ More
Ultrashort optical pulses with orbital angular momentum (OAM) owing to their various applications in classical as well as quantum domains attract a lot of research attention. The evolution of their spatio-temporal dynamics is of particular interest. In the present work, we numerically explore the spatio-temporal evolution of ultrashort Laguerre Gauss (LG) vortex with power exponential spectrum, also called power exponential (PE) pulse, in dispersive and nonlinear media. We in particular address the evolution of space-time non-separable ultrashort vortex pulse. The study reveals the asymmetric spatio-temporal evolution and splitting in the spatio-temporal plane. We observe compression at the trailing edge of the pulse with increase in the strength of the nonlinearity. The study further reveals that the temporal, spectral and, chirp evolution patterns of the pulse vary uniquely across different spatial regions and this variation depends upon the strength of nonlinearity and propagation distance. In weak nonlinear regime, a redshift in spectrum is noted as we move radially outward from the bright caustic of ultrashort LG vortex while a blue shifted spectrum emerges on approaching towards the phase singularity. Interestingly, as the pulse furthers in the medium, nonlinearity induced trends in spectral shift is witnessed. With stronger nonlinearity, a complex spectral evolution is observed. Furthermore, we study the evolution of frequency chirp with propagation distance both with weak and strong nonlinearities.
△ Less
Submitted 4 June, 2024; v1 submitted 26 May, 2024;
originally announced May 2024.
-
Bifunctional Noble Metal-free Ternary Chalcogenide Electrocatalysts for Overall Water Splitting
Authors:
Shantanu Singh,
Ahamed Irshad,
Germany Diaz De la Cruz,
Boyang Zhao,
Billal Zayat,
Qiaowan Chang,
Sri Narayan,
Jayakanth Ravichandran
Abstract:
Hydrogen has been identified as a clean, zero carbon, sustainable, and promising energy source for the future, and electrochemical water splitting for hydrogen production is an emission-free, efficient energy conversion technology. A major limitation of this approach is the unavailability of efficient, abundant, inexpensive catalysts, which prompts the need for new catalytic materials. Here, we re…
▽ More
Hydrogen has been identified as a clean, zero carbon, sustainable, and promising energy source for the future, and electrochemical water splitting for hydrogen production is an emission-free, efficient energy conversion technology. A major limitation of this approach is the unavailability of efficient, abundant, inexpensive catalysts, which prompts the need for new catalytic materials. Here, we report the synthesis and electrocatalytic properties of a novel transition metal-based ternary chalcogenide family, LaMS$_3$ (M = Mn, Fe, Co, Ni). Powder X-ray diffraction confirms the phase purity of these materials, while composition analysis using energy dispersive spectroscopy (EDS) confirms the presence of the stoichiometric ratio of elements in these compounds. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were used to study the chemical states on the surface and in bulk, respectively. These materials exhibit bifunctional catalytic activity towards the two half-reactions of the water-splitting process, with LaNiS$_3$ being the most active material for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The LaMS$_3$ compounds show long-term stability with negligible change in the overpotential at a constant current density of 10 mA cm$^{-2}$ over 18 hours of measurements. As compared to the corresponding ternary oxides, the LaMS$_3$ materials exhibit higher activity and significantly lower Tafel slopes. The ability to catalyze both half-reactions of water electrolysis makes these materials promising candidates for bifunctional catalysts and presents a new avenue to search for high-efficiency electrocatalysts for water splitting.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Measurement of gravitational acceleration in a single laser operated atomic fountain
Authors:
Kavish Bhardwaj,
S. Singh,
S. P. Ram,
B. Jain,
Vijay Kumar,
Ayukt Pathak,
Shradha Tiwari,
V. B. Tiwari,
S. R. Mishra
Abstract:
We present measurements on Earth's gravitational acceleration (g) using an in-house developed cold atom gravimeter (CAG) in an atomic fountain geometry. In the setup, the laser cooled $^{87}Rb$ atoms are launched vertically up in the fountain geometry and Doppler sensitive two-photon Raman pulse atom interferometry is applied to detect the gravitational acceleration experienced by the atoms. Using…
▽ More
We present measurements on Earth's gravitational acceleration (g) using an in-house developed cold atom gravimeter (CAG) in an atomic fountain geometry. In the setup, the laser cooled $^{87}Rb$ atoms are launched vertically up in the fountain geometry and Doppler sensitive two-photon Raman pulse atom interferometry is applied to detect the gravitational acceleration experienced by the atoms. Using our gravimeter setup, we have measured the local value of 'g' in our laboratory with sensitivity of 621 $μ$Gal for integration time of 1350 s.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Diffuse scattering from dynamically compressed single-crystal zirconium following the pressure-induced $α\toω$ phase transition
Authors:
P. G. Heighway,
S. Singh,
M. G. Gorman,
D. McGonegle,
J. H. Eggert,
R. F. Smith
Abstract:
The prototypical $α\toω$ phase transition in zirconium is an ideal test-bed for our understanding of polymorphism under extreme loading conditions. After half a century of study, a consensus had emerged that the transition is realized via one of two distinct displacive mechanisms, depending on the nature of the compression path. However, recent dynamic-compression experiments equipped with in situ…
▽ More
The prototypical $α\toω$ phase transition in zirconium is an ideal test-bed for our understanding of polymorphism under extreme loading conditions. After half a century of study, a consensus had emerged that the transition is realized via one of two distinct displacive mechanisms, depending on the nature of the compression path. However, recent dynamic-compression experiments equipped with in situ diffraction diagnostics performed in the past few years have revealed new transition mechanisms, demonstrating that our understanding of the underlying atomistic dynamics and transition kinetics is in fact far from complete. We present classical molecular dynamics simulations of the $α\toω$ phase transition in single-crystal zirconium shock-compressed along the [0001] axis using a machine-learning-class potential. The transition is predicted to proceed primarily via a modified version of the two-stage Usikov-Zilberstein mechanism, whereby the high-pressure $ω$-phase heterogeneously nucleates at boundaries between grains of an intermediate $β$-phase. We further observe the fomentation of atomistic disorder at the junctions between $β$ grains, leading to the formation of highly defective interstitial material between the $ω$ grains. We directly compare synthetic x-ray diffraction patterns generated from our simulations with those obtained using femtosecond diffraction in recent dynamic-compression experiments, and show that the simulations produce the same unique, anisotropic diffuse scattering signal unlike any previously seen from an elemental metal. Our simulations suggest that the diffuse signal arises from a combination of thermal diffuse scattering, nanoparticle-like scattering from residual kinetically stabilized $α$ and $β$ grains, and scattering from interstitial defective structures.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
High-order harmonic generation from laser induced plasma comprising CdSe/V2O5 Core/Shell quantum dots embedded on MoS2 nanosheets
Authors:
Srinivasa Rao Konda,
Puspendu Barik,
Subshash Singh,
Venkatesh Mottamchetty,
Amit Srivasthava,
Vyacheslav V. Kim,
Rashid A. Ganeev,
Chunlei Guo,
Wei Li
Abstract:
Research of the nonlinear optical characteristics of transition metal dichalcogenides in the presence of photoactive particles, plasmonic nanocavities, waveguides, and metamaterials is still in its early stages. This investigation delves into the high-order harmonic generation (HHG) from laser induced plasma of MoS2 nanosheets in the presence of semiconductor photoactive medium such as CdSe and Cd…
▽ More
Research of the nonlinear optical characteristics of transition metal dichalcogenides in the presence of photoactive particles, plasmonic nanocavities, waveguides, and metamaterials is still in its early stages. This investigation delves into the high-order harmonic generation (HHG) from laser induced plasma of MoS2 nanosheets in the presence of semiconductor photoactive medium such as CdSe and CdSe/V2O5 core/shell quantum dots. Our comprehensive findings shed light on the counteractive coupling impact of both bare and passivated quantum dots on MoS2 nanosheets, as evidenced by the emission of higher-order harmonics. Significantly, the intensity of harmonics and their cut-off were notably enhanced in the MoS2-CdSe and MoS2-V-CdSe configurations compared to pristine MoS2 nanosheets. These advancements hold promise for applications requiring the emission of coherent short-wavelength radiation.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Evolution of Ring Airy vortex beam and Ring Pearcey vortex beam in turbulent atmosphere and a comparative analysis of their channel efficiency
Authors:
Shakti Singh,
Sanjay Kumar Mishra,
Akhilesh Kumar Mishra
Abstract:
An optical vortex beam propagating through turbulent atmosphere encounters distortions in the wavefront that results in modal scattering. Abruptly autofocussing (AAF) beams with orbital angular momentum have gained significant attention due to their non-diffracting and self-healing nature. These warrants understanding of the behaviour of these beams through turbulent atmosphere absolutely necessar…
▽ More
An optical vortex beam propagating through turbulent atmosphere encounters distortions in the wavefront that results in modal scattering. Abruptly autofocussing (AAF) beams with orbital angular momentum have gained significant attention due to their non-diffracting and self-healing nature. These warrants understanding of the behaviour of these beams through turbulent atmosphere absolutely necessary. With this intuition, in the present work we investigate the behaviour of two AAF beams namely ring Airy vortex beam (RAVB) and ring Pearcey vortex beam (RPVB) through the turbulent atmosphere in two cases: multiplexed and non-multiplexed. We propagate multiplexed as well as non-multiplexed RAVB and RPVB in different levels of turbulent atmosphere. In non-multiplexed case, channel efficiency declines for both the beams with increase in modes numbers. In multiplexed case, increasing the gap between the mode sets results in decrease in channel efficiency. We also report that in weak atmospheric turbulence RAVB outperform RPVB in terms of channel efficiency. We use optical transformation sorting (log-polar) method to demultiplex the optical beams at the output. Furthermore, we investigate and compare the OAM spectra of both beams in different levels of atmospheric turbulence and at different propagation distances. The comparison reveals that the spectra of RPVB is more dispersive as compared to that of RAVB.
△ Less
Submitted 21 April, 2024;
originally announced April 2024.
-
Charge transfer mechanism on MoS$_2$ nanosheets in the presence of a semiconductor photoactive media
Authors:
Srinivasa Rao Konda,
Puspendu Barik,
Subshash Singh,
Venkatesh Mottamchetty,
Amit Srivasthava,
Rashid A. Ganeev,
Soma Venugopal Rao,
Chunlei Guo,
Wei Li
Abstract:
The studies of the nonlinear optical (NLO) properties of the transition metal dichalcogenides (TMDs) coupled with photoactive particles, plasmonic nanocavities, waveguides, and metamaterials remain in their infancy. This study investigates the third-order NLO properties of MoS$_2$ nanosheets in the presence of a semiconductor photoactive medium. Our extensive studies and the obtained results revea…
▽ More
The studies of the nonlinear optical (NLO) properties of the transition metal dichalcogenides (TMDs) coupled with photoactive particles, plasmonic nanocavities, waveguides, and metamaterials remain in their infancy. This study investigates the third-order NLO properties of MoS$_2$ nanosheets in the presence of a semiconductor photoactive medium. Our extensive studies and the obtained results reveal the counteractive coupling effect of bare and passivated quantum dots on the MoS$_2$ nanosheet, as made evident by the analysis of the NLO processes. The enhanced NLO properties of MoS$_2$ nanosheets functionalized with CdSe and CdSe-V2O5 quantum dots are helpful for applications as saturable absorbers in laser applications and the emission of coherent short-wavelength radiation. The multiphoton-excitation resonance energy transfer mechanism exploiting remote dipole dipole coupling, and ultrafast charge transfer pathways emerges as another plausible way to alter the NLO properties in TMDs.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Copper do** effects on the superconducting properties of Sm-based oxypnictides
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Taras Palasyuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Cezariusz Jastrzebski,
Michał Wierzbicki,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
A systematic investigation has been performed by synthesis and comprehensive characterization of a series of SmFe1-xCuxAsO0.8F0.2 bulks (x = 0 to 0.2). These samples are well characterized by structural, Raman spectroscopy, microstructural, transport, magnetic measurements, and supplementary calculations within density functional theory (DFT). The parent compound, SmFeAsO0.8F0.2 (Sm1111), exhibits…
▽ More
A systematic investigation has been performed by synthesis and comprehensive characterization of a series of SmFe1-xCuxAsO0.8F0.2 bulks (x = 0 to 0.2). These samples are well characterized by structural, Raman spectroscopy, microstructural, transport, magnetic measurements, and supplementary calculations within density functional theory (DFT). The parent compound, SmFeAsO0.8F0.2 (Sm1111), exhibits a superconducting transition temperature (Tc) of approximately 54 K. The lattice volume (V) is increased with Cu substitution (x) without observing any impurity phase related to copper, which confirms the successful incorporation of Cu at Fe sites in the superconducting FeAs layers. These analyses are also well in agreement with Raman spectroscopy measurements and relevant DFT results. The superconducting transition is decreased systematically with copper do** and completely suppressed for 7% Cu-doped Sm1111 (x = 0.07). A large amount of Cu substitution (x greater than 0.07) has demonstrated the metal to insulate transition in the low-temperature range, and no impurity phase was observed even at high Cu do** levels (x = 0.2). The calculated critical current density of the parent sample is suppressed with copper substitution, suggesting the reduced pinning centers, sample density, and grain connections, as confirmed by the microstructural analysis. Our studies suggest that the substitution of Cu in the superconducting FeAs layer, resulting the enlargement of the lattice volume, is a source of strong disorder scattering, leading to the suppression of Tc and the emergence of metal-to-insulator, unlike the more successful carrier do** by nickel (Ni) or cobalt (Co), as previously reported.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Computational modelling of complex multiphase behavior of environmentally-friendly materials for sustainable technological solutions
Authors:
Akshayveer Akshayveer,
Federico C Buroni,
Roderick Melnik,
Luis Rodriguez-Tembleque,
Andres Saez,
Sundeep Singh
Abstract:
This study presents a computational framework to investigate and predict the complicated multiphase properties of eco-friendly lead-free piezoelectric materials, which are crucial for sustainable technological progress. Although their electromechanical properties vary by phase, lead-free piezoelectric materials show a considerable thermo-electromechanical response. Lead-free materials such as Bi…
▽ More
This study presents a computational framework to investigate and predict the complicated multiphase properties of eco-friendly lead-free piezoelectric materials, which are crucial for sustainable technological progress. Although their electromechanical properties vary by phase, lead-free piezoelectric materials show a considerable thermo-electromechanical response. Lead-free materials such as Bi$_{0.5}$Na$_{0,5}$TiO$_{3}$ (BNT) and other BNT-type piezoelectric materials transition to rhombohedral (R3c), orthorhombic (Pnma), tetragonal (P4bm), and cubic (Cc) phases with temperature variation. These phases are determined by the symmetry and alignment of the ferroelectric domains. Multiple phases can occur simultaneously under specific thermal, electrical, and mechanical conditions, leading in complex multiphase behaviour. These materials' performance must be assessed by studying such behaviour. This study uses Landau-Ginzburg-Devonshire theory to simulate material micro-domain phase transitions. The computational model for BNT-type piezoelectric material covers temperature-induced ferroelectric domain switching and phase transitions. Therefore, the developed computational approach will assist us in better understanding the influence of these materials' complex multiphase behaviour on creating sustainable solutions with green technologies.
△ Less
Submitted 16 April, 2024; v1 submitted 12 March, 2024;
originally announced March 2024.
-
Investigation of the Thermal Structure in the Atmospheric Boundary Layer During Evening Transition and the Impact of Aerosols on Radiative Cooling
Authors:
Suryadev Pratap Singh,
Mohammad Rafiuddin,
Subham Banerjee,
Sreenivas K R
Abstract:
We have explored the evening transition using data from eighty days of observations across two fog seasons at the Kempegowda International Airport, Bengaluru (KIAB). Through field experiments and simulations integrating aerosol interaction in a radiation-conduction model, we elucidate the impact of aerosols on longwave cooling of the Atmospheric Boundary Layer (ABL). Field observations indicate th…
▽ More
We have explored the evening transition using data from eighty days of observations across two fog seasons at the Kempegowda International Airport, Bengaluru (KIAB). Through field experiments and simulations integrating aerosol interaction in a radiation-conduction model, we elucidate the impact of aerosols on longwave cooling of the Atmospheric Boundary Layer (ABL). Field observations indicate that under calm and clear-sky conditions, the evening transition typically results in a distinct vertical thermal structure called the Lifted Temperature Minimum (LTM). We observe that the prevailing profile near the surface post-sunset is the LTM-profile. Additionally, the occurrence of LTM is observed to increase with decreases in downward and upward longwave flux, soil sensible heat flux, wind speed, and turbulent kinetic energy measured at two meters above ground level (AGL). In such scenarios, the intensity of LTM-profiles is primarily governed by aerosol-induced longwave heating rate (LHR) within the surface layer. Furthermore, the presence of clouds leads to increased downward flux, causing the disappearance of LTM, whereas shallow fog can enhance LTM intensity, as observed in both field observations and simulations. Usually, prevailing radiation models underestimate aerosol-induced longwave heating rate (LHR) by an order, compared to actual field observations. We attribute this difference to aerosol-induced radiation divergence. We show that impact of aerosol-induced LHR extends hundreds of meters into the inversion layer, affecting temperature profiles and potentially influencing processes such as fog formation. As the fog layer develops, LHR strengthens at its upper boundary, however, we highlight the difficulty in detecting this cooling using remote instruments such as microwave radiometer.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
Molten flux growth of single crystals of quasi-1D hexagonal chalcogenide BaTiS3
Authors:
Huandong Chen,
Shantanu Singh,
Hongyan Mei,
Guodong Ren,
Boyang Zhao,
Mythilli Surendran,
Yan-Ting Wang,
Rohan Mishra,
Mikhail A. Kats,
Jayakanth Ravichandran
Abstract:
BaTiS3, a quasi-1D complex chalcogenide, has gathered considerable scientific and technological interest due to its giant optical anisotropy and electronic phase transitions. However, the synthesis of high-quality BaTiS3 crystals, particularly those featuring crystal sizes of millimeters or larger, remains a challenge. Here, we investigate the growth of BaTiS3 crystals utilizing a molten salt flux…
▽ More
BaTiS3, a quasi-1D complex chalcogenide, has gathered considerable scientific and technological interest due to its giant optical anisotropy and electronic phase transitions. However, the synthesis of high-quality BaTiS3 crystals, particularly those featuring crystal sizes of millimeters or larger, remains a challenge. Here, we investigate the growth of BaTiS3 crystals utilizing a molten salt flux of either potassium iodide, or a mixture of barium chloride and barium iodide. The crystals obtained through this method exhibit a substantial increase in volume compared to those synthesized via the chemical vapor transport method, while preserving their intrinsic optical and electronic properties. Our flux growth method provides a promising route towards the production of high-quality, large-scale single crystals of BaTiS3, which will greatly facilitate advanced characterizations of BaTiS3 and its practical applications that require large crystal dimensions. Additionally, our approach offers an alternative synthetic route for other emerging complex chalcogenides.
△ Less
Submitted 9 March, 2024;
originally announced March 2024.
-
Unidirectional Cyclic Quantum Teleportation of Arbitrary Schrodinger Cat Coherent-states via Bell Coherent-States
Authors:
Ankita Pathak,
Ravi S. Singh
Abstract:
Exploiting the cluster of three Bell coherent-states as quantum channel, we presented a scheme wherein quantum-informations encoded in three arbitrary superposed coherent states, i.e., Schrodinger Cat coherent-states are simultaneously transmitted in unidirectional cyclic sequence among three parties by invoking usage of linear optical gadgets such as ideal beam-splitters, phase shifters and photo…
▽ More
Exploiting the cluster of three Bell coherent-states as quantum channel, we presented a scheme wherein quantum-informations encoded in three arbitrary superposed coherent states, i.e., Schrodinger Cat coherent-states are simultaneously transmitted in unidirectional cyclic sequence among three parties by invoking usage of linear optical gadgets such as ideal beam-splitters, phase shifters and photon-number-resolving detectors. Proposed simultaneous unidirectional Cyclic Quantum Teleportation is faithful with one-eighth probability of success. Furthermore, it is seen that not every detection-events provides faithful scheme and, hence, fidelity and probability of success of near-faithful Cyclic Quantum Teleportation is evaluated and numerically interpreted.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Piezoelectricity and flexoelectricity in biological cells: The role of cell structure and organelles
Authors:
Akepogu Venkateshwarlu,
Akshayveer,
Sundeep Singh,
Roderick Melnik
Abstract:
Living tissues experience various external forces on cells, influencing their behaviour, physiology, shape, gene expression, and destiny through interactions with their environment. Despite much research done in this area, challenges remain in our better understanding of the behaviour of the cell in response to external stimuli, including the arrangement, quantity, and shape of organelles within t…
▽ More
Living tissues experience various external forces on cells, influencing their behaviour, physiology, shape, gene expression, and destiny through interactions with their environment. Despite much research done in this area, challenges remain in our better understanding of the behaviour of the cell in response to external stimuli, including the arrangement, quantity, and shape of organelles within the cell. This study explores the electromechanical behaviour of biological cells, including organelles like microtubules, mitochondria, nuclei, and cell membranes. Two distinct cell structures have been developed to explore the cell responses to mechanical displacement, resembling actual cell shapes. The finite element method has been utilized to integrate the linear piezoelectric and non-local flexoelectric effects accurately. It is found that the longitudinal stress is absent and only the transverse stress plays a crucial role when the mechanical load is imposed on the top side of the cell through compressive displacement. The impact of flexoelectricity is elucidated by introducing a new parameter called the maximum electric potential ratio ($V_{\text{R,max}}$). It has been found that $V_{\text{R,max}}$ depends upon the orientation angle and shape of the microtubules. Further, the study reveals that the number of microtubules significantly impacts effective elastic and piezoelectric coefficients, affecting cell behaviour based on structure, microtubule orientation, and mechanical stress direction. The insight obtained from the current study can assist in advancements in medical therapies such as tissue engineering and regenerative medicine.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Design, fabrication, and performance of a versatile graphene epitaxy system for the growth of epitaxial graphene on SiC
Authors:
S. Mondal,
U. J. Jayalekshmi,
S. Singh,
R. K. Mukherjee,
A. K Shukla
Abstract:
A versatile Graphene Epitaxy (GrapE) furnace has been designed and fabricated for the growth of epitaxial graphene (EG) on silicon carbide (SiC) under diverse growth environments ranging from high vacuum to atmospheric argon pressure. Radio-frequency (RF) induction enables heating capabilities up to 2000°C, with controlled heating ramp rates achievable up to 200°C/s. Details of critical design asp…
▽ More
A versatile Graphene Epitaxy (GrapE) furnace has been designed and fabricated for the growth of epitaxial graphene (EG) on silicon carbide (SiC) under diverse growth environments ranging from high vacuum to atmospheric argon pressure. Radio-frequency (RF) induction enables heating capabilities up to 2000°C, with controlled heating ramp rates achievable up to 200°C/s. Details of critical design aspects and temperature characteristics of the GrapE system are discussed. The GrapE system, being automated, has enabled the growth of high-quality EG monolayers and turbostratic EG on SiC using diverse methodologies such as close confinement sublimation (CCS), open configuration, polymer-assisted CCS, and rapid thermal annealing. This showcases the versatility of the GrapE system in EG growth. Comprehensive characterizations involving atomic force microscopy, Raman spectroscopy, and low-energy electron diffraction techniques were employed to validate the quality of the produced EG.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Effect of impurity phase and high-pressure synthesis on the superconducting properties of CaKFe4As4
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
AeAFe4As4 (Ae = Ca, A = K; 1144) having a transition temperature of 35 K is a stoichiometric family of iron-based superconductors (FBS). Here, we present a detailed study of a high-pressure synthesis of CaKFe4As4 bulks to investigate the impact of these conditions on the superconducting properties of the 1144 family. Additionally, these samples are also prepared by conventional synthesis method at…
▽ More
AeAFe4As4 (Ae = Ca, A = K; 1144) having a transition temperature of 35 K is a stoichiometric family of iron-based superconductors (FBS). Here, we present a detailed study of a high-pressure synthesis of CaKFe4As4 bulks to investigate the impact of these conditions on the superconducting properties of the 1144 family. Additionally, these samples are also prepared by conventional synthesis method at ambient pressure (CSP) and studied the influence of impurities on the superconducting properties of CaKFe4As4. Structural, microstructural, transport and magnetization measurements have been performed to reach the final conclusions. Interestingly, the high-pressure synthesis of the parent CaKFe4As4 compound enhances the transition temperature (Tc) by 2 K and the critical current density (Jc) by one order of magnitude in the whole magnetic field range of 9 T than that of the 1144 bulks prepared by CSP. It suggests the improvement of the pinning centers and grain connections by the high-pressure synthesis approach. Interestingly, our results depict the superconducting onset transition temperature (Tconset) of this stoichiometric 1144 family is robust with the presence of the common 122 (CaFe2As2 or KFe2As2) impurity phases, which is a different behavior compared to other FBS families. However, these impurity phases reduce the grain connections and lead to the phase separation during the formation of the superconducting (1144) phase.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Microscopic pathways of transition from low-density to high-density amorphous phase of water
Authors:
Gadha Ramesh,
Ved Mahajan,
Debasish Koner,
Rakesh S. Singh
Abstract:
Much attention has been devoted to understanding the microscopic pathways of phase transition between two equilibrium condensed phases (such as liquids and solids). However, the microscopic pathways between non-equilibrium, non-diffusive amorphous (glassy) phases still remain poorly understood. In this work, we have employed computer simulations, persistence homology (a tool rooted in topological…
▽ More
Much attention has been devoted to understanding the microscopic pathways of phase transition between two equilibrium condensed phases (such as liquids and solids). However, the microscopic pathways between non-equilibrium, non-diffusive amorphous (glassy) phases still remain poorly understood. In this work, we have employed computer simulations, persistence homology (a tool rooted in topological data analysis), and machine learning to probe the microscopic pathway of pressure-induced non-equilibrium transition between the low- and high-density amorphous (LDA and HDA, respectively) ice phases of TIP4P/2005 and ST2 water models. Using persistence homology and machine learning, we introduced a new order parameter that unambiguously identifies the LDA and HDA-like local environments. The system transitions continuously and collectively in the order parameter space via a pre-ordered intermediate phase during the compression of the LDA phase. The local order parameter susceptibilities show a maximum near the transition pressure ($P^*$) -- suggesting maximum structural heterogeneities near $P^*$. The HDA-like clusters are structurally ramified and spatially delocalized inside the LDA phase near the transition pressure. We have further investigated the (geometrical) structures and topologies of the LDA and HDA ices formed via different protocols and also studied the dependence of the microscopic pathway of phase transition in the order parameter space on the protocol followed to prepare the initial LDA phase. Finally, the method adopted here to study the microscopic pathways of transition is not restricted to the system under consideration and provides a robust way of probing phase transition pathways involving any two condensed phases at both equilibrium and out-of-equilibrium conditions.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Fast measurement of group index variation with ultimate precision using Hong-Ou-Mandel interferometry
Authors:
Sandeep Singh,
Vimlesh Kumar,
G. K. Samanta
Abstract:
Hong-Ou-Mandel (HOM) interferometry has emerged as a valuable tool for quantum sensing applications, particularly in measuring physical parameters that influence the relative optical delay between pair photons. Unlike classical techniques, HOM-based quantum sensors offer higher resolution due to their intrinsic dispersion cancellation property. Despite this advantage, achieving precise measurement…
▽ More
Hong-Ou-Mandel (HOM) interferometry has emerged as a valuable tool for quantum sensing applications, particularly in measuring physical parameters that influence the relative optical delay between pair photons. Unlike classical techniques, HOM-based quantum sensors offer higher resolution due to their intrinsic dispersion cancellation property. Despite this advantage, achieving precise measurements of optical delay crucial for practical applications often involves time-consuming integration and post-processing with traditional statistical methods. To address this challenge, our recent work focused on optimizing optical delay measurements in a time-efficient manner. By carefully selecting the length of a 1 mm periodically-poled KTP (PPKTP) crystal for pair photon generation, we achieved a remarkable group index measurement precision of $\sim 6.75\times 10^{-6}$ per centimeter of sample length, surpassing the previous maximum precision by over 400$\%$. These current measurements maintain fast detection and high photon counts, which are essential for practical quantum sensing applications. The HOM-based method, while limiting the measurement range, can be extended by compensating for photon delay using an optical delay stage. As a proof-of-principle, we measured the group index variation of PPKTP over a temperature range up to 200$^{\circ}$C with a precision in the range of one part per million ($\sim$10$^{-6}$). This advancement not only contributes to quantum sensing but also holds promising implications for high-precision and long-range measurements in quantum optical coherence tomography.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Formation of nano and micro scale hierarchical structures in MgO and ZnO quantum dots doped LC media: The role of competitive forces
Authors:
A. K. Singh,
S. P. Singh
Abstract:
In this paper, we have studied the effect of do** of ZnO and MgO nanoparticles (NPs) in 4-(trans-4-n-hexylcyclo-hexyl) isothiocyanatobenzoate. A thorough comparison of dielectric properties, optoelectronic properties, and calorimetric phase transition properties has been done for MgO and ZnO NP doped LC. We prepare their homogenous mixture of MgO and ZnO NPs in toluene and transfer into cells ma…
▽ More
In this paper, we have studied the effect of do** of ZnO and MgO nanoparticles (NPs) in 4-(trans-4-n-hexylcyclo-hexyl) isothiocyanatobenzoate. A thorough comparison of dielectric properties, optoelectronic properties, and calorimetric phase transition properties has been done for MgO and ZnO NP doped LC. We prepare their homogenous mixture of MgO and ZnO NPs in toluene and transfer into cells made of glass and Indium Tin-Oxide (ITO) coated glass. The observed microstructures in the hybrid system can be classified into three main categories: grain like structures formed by aggregation of smaller size MgO nanoparticles while liquid crystal molecules anchor over the surfaces of nanoparticles, the grtu grain-like structures further integrate to form inorganic polymeric type of honeycomb-like mesostructures in presence of glass surface, and flower-like clusters of MgO nanoparticles on ITO surface. The smaller size nanoparticles can maintain the energy balance by allowing the anchoring of liquid crystal molecules over their surfaces whereas the larger size nanoparticles cannot compromise or maintain the energy balance with the liquid crystal molecules and are separated out to nucleate and form bigger size nanoaggregate or clusters. The energy preference of the substrate and nanoparticle's surface to liquid crystal molecules plays an important role in the formation of different types of hierarchical nano- and microstructures. We account the reasons for the formation of nano and micro scale hierarchical structures on the basis of the competition between the forces: NP-NP, LC-LC, NP-LC, Glass/ITO-NP, and Glass/ITO-LC interactions. We observed a considerable change in the dielectric properties, transition temperature, bandgap, and other parameters of LC molecules when MgO NPs are doped, but a minor change occurs when ZnO NPs are doped in LC.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
The influence of thermo-electromechanical coupling on the performance of lead-free BNT-type piezoelectric materials
Authors:
Akshayveer,
Federico C Buroni,
Roderick Melnik,
Luis Rodriguez-Tembleque,
Andres Saez,
Sundeep Singh
Abstract:
In recent times, there have been notable advancements in haptic technology, particularly in screens found on mobile phones, laptops, LED screens, and control panels. However, it is essential to note that the progress in high-temperature haptic applications is still in the developmental phase. Due to its complex phase and domain structures, lead-free piezoelectric materials such as BNT-based haptic…
▽ More
In recent times, there have been notable advancements in haptic technology, particularly in screens found on mobile phones, laptops, LED screens, and control panels. However, it is essential to note that the progress in high-temperature haptic applications is still in the developmental phase. Due to its complex phase and domain structures, lead-free piezoelectric materials such as BNT-based haptic technology behave differently at high temperatures than ambient conditions. Therefore, it is essential to investigate the aspects of thermal management and thermal stability, as temperature plays a vital role in the phase and domain transition of BNT material. A two-dimensional thermo-electromechanical model has been proposed in this study to analyze the thermal stability of BNT material by analyzing the impact of temperature on effective electromechanical properties and mechanical and electric field parameters. However, the thermo-electromechanical modelling of BNT ceramics examines the macroscopic effects of the applied thermal field on mechanical and electric field parameters as phase change and microdomain dynamics are not considered in this model. This study analyzes the impact of thermo-electromechanical coupling on the performance of BNT-type piezoelectric materials compared to conventional electromechanical coupling. The results predicted a significant improvement in piezoelectric response compared to electromechanical coupling due to increased thermoelectric effect in absence of phase change and microdomain switching for temperature boundary conditions below depolarization temperature ($T_{d}$~200$^{\circ}$C for pure BNT material).
△ Less
Submitted 25 December, 2023;
originally announced December 2023.
-
Wait-time Distributions for Photoelectric Detection of Light
Authors:
Luis Felipe Morales Bultron,
Reeta Vyas,
Surendra Singh
Abstract:
Wait-time distributions for the $n$th photo-detection at a detector illuminated by a stationary light beam are studied. Both unconditional measurements, initiated at an arbitrary instant, and conditional measurements, initiated upon a photo-detection, are considered. Simple analytic expressions are presented for several classical and quantum sources of light and are used to quantify and compare ph…
▽ More
Wait-time distributions for the $n$th photo-detection at a detector illuminated by a stationary light beam are studied. Both unconditional measurements, initiated at an arbitrary instant, and conditional measurements, initiated upon a photo-detection, are considered. Simple analytic expressions are presented for several classical and quantum sources of light and are used to quantify and compare photon sequences generated by them. These distributions can be measured in photon counting experiments and are useful in characterizing and generating photon sequences with prescribed statistics. Effects of non-unit detection efficiency are also discussed, and curves are presented to illustrate the behavior.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Radioisotopes production using lasers: from basic science to applications
Authors:
M. R. D. Rodrigues,
A. Bonasera,
M. Scisciò,
J. A. Pérez-Hernández,
M. Ehret,
F. Filippi,
P. L. Andreoli,
M. Huault,
H. Larreur,
D. Singappuli,
D. Molloy,
D. Raffestin,
M. Alonzo,
G. G. Rapisarda,
D. Lattuada,
G. L. Guardo,
C. Verona,
Fe. Consoli,
G. Petringa,
A. McNamee,
M. La Cognata,
S. Palmerini,
T. Carriere,
M. Cipriani,
G. Di Giorgio
, et al. (15 additional authors not shown)
Abstract:
Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions c…
▽ More
Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions can occur and radioisotopes relevant for medical purposes be produced. High repetition lasers can be used to produce enough isotopes for medical applications. This route is competitive to conventional methods mostly based on accelerators. In this paper we study the production of $^{67}$Cu, $^{63}$Zn, $^{18}$F and $^{11}$C currently used in positron emission tomography (PET) and other applications. At the same time, we study the reaction $^{10}$B(p,$α$)$^{7}$Be and $^{70}$Zn(p,4n)$^{67}$Ga to put further constraints to the proton distributions at different angles and to the reaction $^{11}$B(p,$α$)$^{8}$Be relevant for energy production. The experiment was performed at the 1 petawatt (PW) laser facility at Vega III located in Salamanca-Spain. Angular distributions of radioisotopes in the forward (with respect to the laser direction) and backward directions were measured using a High Purity Germanium Detector (HPGE). Our results are reasonably reproduced by the numerical estimates following the approach of Kimura et al. (NIMA637(2011)167)
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Spin-Orbital Coupling in All-Inorganic Metal-Halide Perovskites: the Hidden Force that Matters
Authors:
Pradeep Raja Anandan,
Muhammad Nadeem,
Chun-Ho Lin,
Simrjit Singh,
Xinwei Guan,
Jiyun Kim,
Shamim Shahroki,
Md Zahidur Rahaman,
Xun Geng,
**g-Kai Huang,
Hien Nguyen,
Hanlin Hu,
Pankaj Sharma,
Jan Seidel,
Xiaolin Wang,
Tom Wu
Abstract:
Highlighted with improved long-term thermal and environmental stability, all-inorganic metal halide perovskites exhibit tunable physical properties, cost-effective synthesis, and satisfactory optoelectronic performance, attracting increasing research interests worldwide. However, a less explored feature of these materials is their strong spin-orbit coupling (SOC), which is the hidden force influen…
▽ More
Highlighted with improved long-term thermal and environmental stability, all-inorganic metal halide perovskites exhibit tunable physical properties, cost-effective synthesis, and satisfactory optoelectronic performance, attracting increasing research interests worldwide. However, a less explored feature of these materials is their strong spin-orbit coupling (SOC), which is the hidden force influencing not only band structure but also properties including magnetoresistance, spin lifetime and singlet-triplet splitting. This review provides an overview of the fundamental aspects and the latest progress of the SOC and debate regarding Rashba effects in all-inorganic metal halide perovskites, providing critical insights into the physical phenomena and potential applications. Meanwhile, crystal structures and photophysics of all-inorganic perovskite are discussed in the context of SOC, along with the related experimental and characterization techniques. Furthermore, a recent understanding of the band topology in the all-inorganic halide perovskites is introduced to push the boundary even further for the novel applications of all-inorganic halide perovskites. Finally, an outlook is given on the potential directions of breakthroughs via leveraging the SOC in halide perovskites.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
Enhancement of Superconducting Properties of Polycrystalline CaKFe4As4 by High-Pressure Growth
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
High-pressure growth is a unique method to improve the sample quality and size. Here, we have used the high gas pressure and high-temperature synthesis (HP-HTS) method to grow CaKFe4As4 (1144) bulks and investigated their superconducting properties using structural, microstructural, transport, and magnetic studies. The microstructural analysis demonstrates that 1144 samples prepared by HP-HTS have…
▽ More
High-pressure growth is a unique method to improve the sample quality and size. Here, we have used the high gas pressure and high-temperature synthesis (HP-HTS) method to grow CaKFe4As4 (1144) bulks and investigated their superconducting properties using structural, microstructural, transport, and magnetic studies. The microstructural analysis demonstrates that 1144 samples prepared by HP-HTS have improved the sample density and grain connectivity. The transition temperature (Tconset) of 1144 bulks prepared by HP-HTS is increased up to 35.2 K with a transition width (ΔT) of 1 K, which is remarkably comparable to the reported 1144 single crystal. Additionally, the critical current density (Jc) is enhanced by almost one order of magnitude compared with the parent compound prepared by the conventional synthesis process at ambient pressure (CSP), which could be attributed to the improved sample density and effective pinning centers. Our study demonstrates that the sample quality and superconducting properties of various iron-based superconductors can be enhanced by applying the HP-HTS approach, and further research is demanded in this direction.
△ Less
Submitted 25 November, 2023;
originally announced November 2023.
-
Antimony Do** Effect on the Superconducting Properties of SmFeAs(O,F)
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
We report the synthesis and characterization of a series of antimony-doped SmFeAs1-xSbxO0.8F0.2 (x = 0, 0.01, 0.03, 0.05, 0.1, 0.2, and 0.3) bulks to investigate the twin do** effects on the superconducting properties of SmFeAs(O,F) caused by fluorine (F) incorporation at O-site in SmO layer and antimony (Sb) substitution at As-site in the conducting layer (FeAs). Since the antimony (Sb) has a l…
▽ More
We report the synthesis and characterization of a series of antimony-doped SmFeAs1-xSbxO0.8F0.2 (x = 0, 0.01, 0.03, 0.05, 0.1, 0.2, and 0.3) bulks to investigate the twin do** effects on the superconducting properties of SmFeAs(O,F) caused by fluorine (F) incorporation at O-site in SmO layer and antimony (Sb) substitution at As-site in the conducting layer (FeAs). Since the antimony (Sb) has a larger size than arsenic (As), the enhancement of lattice parameters has been confirmed by the XRD analysis. Microstructural analysis confirms that Sb-do** leads to a small improvement in the sample density and an increase in the inhomogeneity of the constituent elements, especially at higher Sb-do** levels. The parent compound SmFeAsO0.8F0.2 has shown the superconducting transition (Tc) at ~54 K, which is systematically reduced with the antimony do** contents (x). Our investigation indicates that the Sb-doped SmFeAs(O,F) phase at low levels is less prone to the multiphase formation than at high levels, which affects the inter- and intragranular behaviour originating from the microstructure nature of 1111 bulks. The critical current density (Jc) of the parent compound has almost the same value as previously reported, which is suppressed slowly with increased Sb-do**. It could be due to the reduced grain connections and the effective pinning centers. This study confirms that the superconducting FeAs layer do** with larger ions at arsenic sites does not support the superconducting properties of Sm1111, which is a distinct behavior from that of Sb-doped CeFeAs(O,F) and LaFeAs(O,F).
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
Optimization of Synthesis Parameters and Superconducting Properties of GdFeAsO1-xFx
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Svitlana Stelmakh,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
REFeAsO (RE1111; RE: rare earth) belongs to the 1111 family of iron-based superconductors (FBS), which illustrates the enhancement of the superconducting transition (Tc) with smaller radii of RE. However, the synthesis of the 1111 phase with a heavy rare-earth is always challenging. In this paper, we report the optimization of the growth and superconducting properties of F-doped GdFeAsO1-xFx bulks…
▽ More
REFeAsO (RE1111; RE: rare earth) belongs to the 1111 family of iron-based superconductors (FBS), which illustrates the enhancement of the superconducting transition (Tc) with smaller radii of RE. However, the synthesis of the 1111 phase with a heavy rare-earth is always challenging. In this paper, we report the optimization of the growth and superconducting properties of F-doped GdFeAsO1-xFx bulks by preparing the samples in a wide temperature range (700-1100°C) at ambient pressure. The optimized synthesis parameters are concluded based on structural, microstructural, transport, and magnetic measurements. These findings suggest that the optimal conditions for preparing F-doped Gd1111 bulks involve a two-step process at 900°C for 61 hours at ambient pressure, which is lower than previously reported. The optimized samples have revealed the superconducting transition temperature (Tconset) of 43 K for GdFeAsO0.83F0.17. The first-time reported critical current Jc value for this Gd1111 is observed of the order of 10^3 (A/cm^2) at 0 T and 5 K. Our investigation also concluded that highly pure precursors, particularly gadolinium metal, are required to achieve the superconducting properties of F-doped Gd1111. A high growth pressure of 1 GPa reduces the superconducting properties of F-doped Gd1111.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Non-Volatile Control of Valley Polarized Emission in 2D WSe2-AlScN Heterostructures
Authors:
Simrjit Singh,
Kwan-Ho Kim,
Kiyoung Jo,
Pariasadat Musavigharavi,
Bumho Kim,
Jeffrey Zheng,
Nicholas Trainor,
Chen Chen,
Joan M. Redwing,
Eric A Stach,
Roy H Olsson III,
Deep Jariwala
Abstract:
Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-eff…
▽ More
Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-effect transistors using a ML-WSe2 channel and a AlScN ferroelectric dielectric, and experimentally demonstrate efficient tuning as well as non-volatile control of valley polarization. We measured a large array of transistors and obtained a maximum valley polarization of ~27% at 80 K with stable retention up to 5400 secs. The enhancement in the valley polarization was ascribed to the efficient exciton-to-trion (X-T) conversion and its coupling with an out-of-plane electric field, viz. the quantum-confined Stark effect. This changes the valley depolarization pathway from strong exchange interactions to slow spin-flip intervalley scattering. Our research demonstrates a promising approach for achieving non-volatile control over valley polarization and suggests new design principles for practical valleytronic devices.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Controlled dissipation for Rydberg atom experiments
Authors:
Bleuenn Bégoc,
Giovanni Cichelli,
Sukhjit P. Singh,
Francesco Perciavalle,
Davide Rossini,
Luigi Amico,
Oliver Morsch
Abstract:
We demonstrate a simple technique for adding controlled dissipation to Rydberg atom experiments. In our experiments we excite cold rubidium atoms in a magneto-optical trap to $70$-S Rydberg states whilst simultaneously inducing forced dissipation by resonantly coupling the Rydberg state to a hyperfine level of the short-lived $6$-P state. The resulting effective dissipation can be varied in streng…
▽ More
We demonstrate a simple technique for adding controlled dissipation to Rydberg atom experiments. In our experiments we excite cold rubidium atoms in a magneto-optical trap to $70$-S Rydberg states whilst simultaneously inducing forced dissipation by resonantly coupling the Rydberg state to a hyperfine level of the short-lived $6$-P state. The resulting effective dissipation can be varied in strength and switched on and off during a single experimental cycle.
△ Less
Submitted 1 November, 2023; v1 submitted 31 October, 2023;
originally announced October 2023.
-
Strategy Revision Phase with Payoff Threshold in the Public Goods Game
Authors:
Marco Alberto Javarone,
Shaurya Pratap Singh
Abstract:
Commonly, the strategy revision phase in evolutionary games relies on payoff comparison. Namely, agents compare their payoff with the opponent, assessing whether changing strategy can be potentially convenient. Even tiny payoff differences can be crucial in this decision process.
In this work, we study the dynamics of cooperation in the Public Goods Game, introducing a threshold $ε$ in the strat…
▽ More
Commonly, the strategy revision phase in evolutionary games relies on payoff comparison. Namely, agents compare their payoff with the opponent, assessing whether changing strategy can be potentially convenient. Even tiny payoff differences can be crucial in this decision process.
In this work, we study the dynamics of cooperation in the Public Goods Game, introducing a threshold $ε$ in the strategy revision phase. In doing so, payoff differences narrower than $ε$ entail the decision process reduces to a coin flip.
Interestingly, with ordinary agents, results show that payoff thresholds curb the emergence of cooperation. Yet, the latter can be sustained by these thresholds if the population is composed of conformist agents, which replace the random-based revision with selecting the strategy of the majority.
To conclude, agents sensible only to consistent payoff differences may represent 'real-world' individuals unable to properly appreciate advantages or disadvantages when facing a dilemma. These agents may be detrimental to the emergence of cooperation or, on the contrary, supportive when endowed with a conformist attitude.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Impact of hydraulic tortuosity on micro/nanoporous flow
Authors:
Shiwani Singh
Abstract:
Using the porous structures made up of homogeneously arranged solid obstacles, we examine the effects of rarefaction on the hydraulic tortuosity in the slip and early transition flow regimes via extended lattice Boltzmann method. We observed that modification in either the obstacle's arrangement or the porosity led to a power-law relation between the porosity-tortuosity. Along with this, we also f…
▽ More
Using the porous structures made up of homogeneously arranged solid obstacles, we examine the effects of rarefaction on the hydraulic tortuosity in the slip and early transition flow regimes via extended lattice Boltzmann method. We observed that modification in either the obstacle's arrangement or the porosity led to a power-law relation between the porosity-tortuosity. Along with this, we also found that in the slip flow regime, the exponent of this relation contains the effect of finite Knudsen number (Kn). In addition, we observed that on properly scaling Kn with porosity and hydraulic tortuosity, a generalized correlation can be obtained for apparent permeability.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Comparison of Gd addition effect on the superconducting properties of FeSe0.5Te0.5 bulks under ambient and high-pressure conditions
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Jan Mizeracki,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizatio…
▽ More
We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizations have been performed on these samples in order to draw the final conclusion. Our analysis results that the HP-HTS applied for the parent compound enhances the transition temperature (Tc) and the critical current density (Jc) with the improved sample density and intergrain connections. The lattice parameter c is increased with Gd additions, suggesting a small amount of Gd enters the tetragonal lattice of FeSe0.5Te0.5 and the Gd interstitial sites are along the c-axis. A systematic decrease of the onset transition temperature Tc is observed with Gd additions, however, the calculated Jc of these Gd-added samples is almost the same as that of the parent compound prepared by CSP. It specifies that there is no improvement of the grain connections or pinning properties due to these rare earth additions. However, Gd-added FeSe0.5Te0.5 bulks prepared by HP-HTS have revealed a slightly improved critical current density due to improved grain connections and sample density but have a lower transition temperature than that of the parent compounds.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
Photoconductive Effects in Single Crystals of BaZrS$_3$
Authors:
Boyang Zhao,
Huandong Chen,
Ragib Ahsan,
Fei Hou,
Eric R Hoglund,
Shantanu Singh,
Huan Zhao,
Han Htoon,
Andrey Krayev,
Maruda Shanmugasundaram,
Patrick E Hopkins,
Jan Seidel,
Rehan Kapadia,
Jayakanth Ravichandran
Abstract:
Chalcogenide perovskites, such as BaZrS$_3$, are emerging semiconductors with potential for high photovoltaic power conversion efficiency. The role of defects in the efficiency of the generation and collection of photo-excited carriers has not been experimentally investigated extensively. We study the effect of processing-induced defects on the photoconductive properties of single crystals of BaZr…
▽ More
Chalcogenide perovskites, such as BaZrS$_3$, are emerging semiconductors with potential for high photovoltaic power conversion efficiency. The role of defects in the efficiency of the generation and collection of photo-excited carriers has not been experimentally investigated extensively. We study the effect of processing-induced defects on the photoconductive properties of single crystals of BaZrS$_3$. We achieved ohmic contacts to single crystals of BaZrS$_3$ and observed positive surface photovoltage, which is typically observed in p-type semiconductors. However, mechanical polishing of BaZrS$_3$ to remove the surface oxide leads to dense deformation grain boundaries and leads to trap-dominated photoconductive response. In comparison, ohmic contacts achieved in cleaved crystals leave fewer deformation defects and greatly improve optoelectronic properties. Defect-controlled crystal growth and contact fabrication are potentially limiting factors for achieving high photon-to-excited electron conversion efficiency in BaZrS$_3$.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
OpenMM 8: Molecular Dynamics Simulation with Machine Learning Potentials
Authors:
Peter Eastman,
Raimondas Galvelis,
Raúl P. Peláez,
Charlles R. A. Abreu,
Stephen E. Farr,
Emilio Gallicchio,
Anton Gorenko,
Michael M. Henry,
Frank Hu,
**g Huang,
Andreas Krämer,
Julien Michel,
Joshua A. Mitchell,
Vijay S. Pande,
João PGLM Rodrigues,
Jaime Rodriguez-Guerra,
Andrew C. Simmonett,
Sukrit Singh,
Jason Swails,
Philip Turner,
Yuanqing Wang,
Ivy Zhang,
John D. Chodera,
Gianni De Fabritiis,
Thomas E. Markland
Abstract:
Machine learning plays an important and growing role in molecular simulation. The newest version of the OpenMM molecular dynamics toolkit introduces new features to support the use of machine learning potentials. Arbitrary PyTorch models can be added to a simulation and used to compute forces and energy. A higher-level interface allows users to easily model their molecules of interest with general…
▽ More
Machine learning plays an important and growing role in molecular simulation. The newest version of the OpenMM molecular dynamics toolkit introduces new features to support the use of machine learning potentials. Arbitrary PyTorch models can be added to a simulation and used to compute forces and energy. A higher-level interface allows users to easily model their molecules of interest with general purpose, pretrained potential functions. A collection of optimized CUDA kernels and custom PyTorch operations greatly improves the speed of simulations. We demonstrate these features on simulations of cyclin-dependent kinase 8 (CDK8) and the green fluorescent protein (GFP) chromophore in water. Taken together, these features make it practical to use machine learning to improve the accuracy of simulations at only a modest increase in cost.
△ Less
Submitted 29 November, 2023; v1 submitted 4 October, 2023;
originally announced October 2023.
-
Adiabatic and post-adiabatic hyperspherical treatment of the huge ungerade proton-hydrogen scattering length
Authors:
Shayamal Singh,
Chris H. Greene
Abstract:
While the hydrogen molecular ion is the simplest molecule in nature and very well studied in all of its properties, it remains an interesting system to use for explorations of fundamental questions. One such question treated in this study relates to finding an optimal adiabatic representation of the physics, i.e. the best adiabatic description that minimizes the role of nonadiabatic effects. As a…
▽ More
While the hydrogen molecular ion is the simplest molecule in nature and very well studied in all of its properties, it remains an interesting system to use for explorations of fundamental questions. One such question treated in this study relates to finding an optimal adiabatic representation of the physics, i.e. the best adiabatic description that minimizes the role of nonadiabatic effects. As a test case explored here in detail, we consider the ungerade symmetry of H$_2^+$, which is known to have a huge scattering length of order 750 bohr radii, and an incredibly weakly bound excited state. We show that a hyperspherical adiabatic description does an excellent job of capturing the main physics. Our calculation yields a competitive scattering length and shows that nonadiabatic corrections are small and can even be adequately captured using the postadiabatic theory of Klar and Fano.
△ Less
Submitted 1 February, 2024; v1 submitted 3 October, 2023;
originally announced October 2023.
-
High gas pressure and high-temperature synthesis (HP-HTS) technique and its impact on iron-based superconductors
Authors:
Mohammad Azam,
Manasa Manasa,
Andrzej Morawski,
Tomasz Cetner,
Shiv J. Singh
Abstract:
The high-pressure growth technique generally plays an important role in the improvement of the sample quality and the enhancement of various physical and magnetic properties of materials. The high gas pressure technique provides a large sample space (10-15 cm) to grow various kinds of materials. In this paper, we introduce the high gas pressure and high-temperature synthesis (HP-HTS) technique tha…
▽ More
The high-pressure growth technique generally plays an important role in the improvement of the sample quality and the enhancement of various physical and magnetic properties of materials. The high gas pressure technique provides a large sample space (10-15 cm) to grow various kinds of materials. In this paper, we introduce the high gas pressure and high-temperature synthesis (HP-HTS) technique that is present at our institute and is applied to the growth process of different kinds of superconducting materials, particularly iron-based superconductors. More details and the working principle of this HP-HTS technique are discussed. We have also demonstrated the current results based on the iron-based superconductors by using this unique HP-HTS technique. These results demonstrate the enhancement of the superconducting properties with the improved sample quality compared to the conventional synthesis process at ambient pressure.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
Light correcting light with nonlinear optics
Authors:
Sachleen Singh,
Bereneice Sephton,
Wagner Tavares Buono,
Vincenzo D'Ambrosio,
Thomas Konrad,
Andrew Forbes
Abstract:
Structured light, where complex optical fields are tailored in all their degrees of freedom, has become highly topical of late, advanced by a sophisticated toolkit comprising both linear and nonlinear optics. Removing undesired structure from light is far less developed, leveraging mostly on inverting the distortion, e.g., with adaptive optics or the inverse transmission matrix of a complex channe…
▽ More
Structured light, where complex optical fields are tailored in all their degrees of freedom, has become highly topical of late, advanced by a sophisticated toolkit comprising both linear and nonlinear optics. Removing undesired structure from light is far less developed, leveraging mostly on inverting the distortion, e.g., with adaptive optics or the inverse transmission matrix of a complex channel, both requiring that the distortion is fully characterised through appropriate measurement. Here we show that distortions in spatially structured light can be corrected through difference frequency generation in a nonlinear crystal without any need for the distortion to be known. We demonstrate the versatility of our approach by using a wide range of aberrations and structured light modes, including higher-order orbital angular momentum (OAM) beams, showing excellent recovery of the original undistorted field. To highlight the efficacy of this process, we deploy the system in a prepare-and-measure communications link with OAM, showing minimal crosstalk even when the transmission channel is highly aberrated, and outline how the approach could be extended to alternative experimental modalities and nonlinear processes. Our demonstration of light correcting light without the need for measurement opens a new approach to measurement-free error correction for classical and quantum structured light, with direct applications in imaging, sensing and communication
△ Less
Submitted 23 September, 2023;
originally announced September 2023.
-
AI Foundation Models for Weather and Climate: Applications, Design, and Implementation
Authors:
S. Karthik Mukkavilli,
Daniel Salles Civitarese,
Johannes Schmude,
Johannes Jakubik,
Anne Jones,
Nam Nguyen,
Christopher Phillips,
Sujit Roy,
Shraddha Singh,
Campbell Watson,
Raghu Ganti,
Hendrik Hamann,
Udaysankar Nair,
Rahul Ramachandran,
Kommy Weldemariam
Abstract:
Machine learning and deep learning methods have been widely explored in understanding the chaotic behavior of the atmosphere and furthering weather forecasting. There has been increasing interest from technology companies, government institutions, and meteorological agencies in building digital twins of the Earth. Recent approaches using transformers, physics-informed machine learning, and graph n…
▽ More
Machine learning and deep learning methods have been widely explored in understanding the chaotic behavior of the atmosphere and furthering weather forecasting. There has been increasing interest from technology companies, government institutions, and meteorological agencies in building digital twins of the Earth. Recent approaches using transformers, physics-informed machine learning, and graph neural networks have demonstrated state-of-the-art performance on relatively narrow spatiotemporal scales and specific tasks. With the recent success of generative artificial intelligence (AI) using pre-trained transformers for language modeling and vision with prompt engineering and fine-tuning, we are now moving towards generalizable AI. In particular, we are witnessing the rise of AI foundation models that can perform competitively on multiple domain-specific downstream tasks. Despite this progress, we are still in the nascent stages of a generalizable AI model for global Earth system models, regional climate models, and mesoscale weather models. Here, we review current state-of-the-art AI approaches, primarily from transformer and operator learning literature in the context of meteorology. We provide our perspective on criteria for success towards a family of foundation models for nowcasting and forecasting weather and climate predictions. We also discuss how such models can perform competitively on downstream tasks such as downscaling (super-resolution), identifying conditions conducive to the occurrence of wildfires, and predicting consequential meteorological phenomena across various spatiotemporal scales such as hurricanes and atmospheric rivers. In particular, we examine current AI methodologies and contend they have matured enough to design and implement a weather foundation model.
△ Less
Submitted 19 September, 2023; v1 submitted 19 September, 2023;
originally announced September 2023.
-
HeLIOS: The Superfluid Helium Ultralight Dark Matter Detector
Authors:
M. Hirschel,
V. Vadakkumbatt,
N. P. Baker,
F. M. Schweizer,
J. C. Sankey,
S. Singh,
J. P. Davis
Abstract:
The absence of a breakthrough in directly observing dark matter (DM) through prominent large-scale detectors motivates the development of novel tabletop experiments probing more exotic regions of the parameter space. If DM contains ultralight bosonic particles, they would behave as a classical wave and could manifest through an oscillating force on baryonic matter that is coherent over…
▽ More
The absence of a breakthrough in directly observing dark matter (DM) through prominent large-scale detectors motivates the development of novel tabletop experiments probing more exotic regions of the parameter space. If DM contains ultralight bosonic particles, they would behave as a classical wave and could manifest through an oscillating force on baryonic matter that is coherent over $\sim 10^6$ periods. Our Helium ultraLIght dark matter Optomechanical Sensor (HeLIOS) uses the high-$Q$ acoustic modes of superfluid helium-4 to resonantly amplify this signal. A superconducting re-entrant microwave cavity enables sensitive optomechanical readout ultimately limited by thermal motion at millikelvin temperatures. Pressurizing the helium allows for the unique possibility of tuning the mechanical frequency to effectively broaden the DM detection bandwidth. We demonstrate the working principle of our prototype HeLIOS detector and show that future generations of HeLIOS could explore unconstrained parameter space for both scalar and vector ultralight DM after just an hour of integration time.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Infrared Nanoimaging of Hydrogenated Perovskite Nickelate Synaptic Devices
Authors:
Sampath Gamage,
Sukriti Manna,
Marc Zajac,
Steven Hancock,
Qi Wang,
Sarabpreet Singh,
Mahdi Ghafariasl,
Kun Yao,
Tom Tiwald,
Tae Joon Park,
David P. Landau,
Haidan Wen,
Subramanian Sankaranarayanan,
Pierre Darancet,
Shriram Ramanathan,
Yohannes Abate
Abstract:
Solid-state devices made from correlated oxides such as perovskite nickelates are promising for neuromorphic computing by mimicking biological synaptic function. However, comprehending dopant action at the nanoscale poses a formidable challenge to understanding the elementary mechanisms involved. Here, we perform operando infrared nanoimaging of hydrogen-doped correlated perovskite, neodymium nick…
▽ More
Solid-state devices made from correlated oxides such as perovskite nickelates are promising for neuromorphic computing by mimicking biological synaptic function. However, comprehending dopant action at the nanoscale poses a formidable challenge to understanding the elementary mechanisms involved. Here, we perform operando infrared nanoimaging of hydrogen-doped correlated perovskite, neodymium nickel oxide (H-NdNiO3) devices and reveal how an applied field perturbs dopant distribution at the nanoscale. This perturbation leads to stripe phases of varying conductivity perpendicular to the applied field, which define the macroscale electrical characteristics of the devices. Hyperspectral nano-FTIR imaging in conjunction with density functional theory calculations unveil a real-space map of multiple vibrational states of H-NNO associated with OH stretching modes and their dependence on the dopant concentration. Moreover, the localization of excess charges induces an out-of-plane lattice expansion in NNO which was confirmed by in-situ - x-ray diffraction and creates a strain that acts as a barrier against further diffusion. Our results and the techniques presented here hold great potential to the rapidly growing field of memristors and neuromorphic devices wherein nanoscale ion motion is fundamentally responsible for function.
△ Less
Submitted 29 August, 2023;
originally announced September 2023.
-
Strain Engineering for High-Performance Phase Change Memristors
Authors:
Wenhui Hou,
Ahmad Azizimanesh,
Aditya Dey,
Yufeng Yang,
Wuxiucheng Wang,
Chen Shao,
Hui Wu,
Hesam Askari,
Sobhit Singh,
Stephen M. Wu
Abstract:
A new mechanism for memristive switching in 2D materials is through electric-field controllable electronic/structural phase transitions, but these devices have not outperformed status quo 2D memristors. Here, we report a high-performance bipolar phase change memristor from strain engineered multilayer 1T'-MoTe$_{2}$ that now surpasses the performance metrics (on/off ratio, switching voltage, switc…
▽ More
A new mechanism for memristive switching in 2D materials is through electric-field controllable electronic/structural phase transitions, but these devices have not outperformed status quo 2D memristors. Here, we report a high-performance bipolar phase change memristor from strain engineered multilayer 1T'-MoTe$_{2}$ that now surpasses the performance metrics (on/off ratio, switching voltage, switching speed) of all 2D memristive devices, achieved without forming steps. Using process-induced strain engineering, we directly pattern stressed metallic contacts to induce a semimetallic to semiconducting phase transition in MoTe2 forming a self-aligned vertical transport memristor with semiconducting MoTe$_{2}$ as the active region. These devices utilize strain to bring them closer to the phase transition boundary and achieve ultra-low ~90 mV switching voltage, ultra-high ~10$^8$ on/off ratio, 5 ns switching, and retention of over 10$^5$ s. Engineered tunability of the device switching voltage and on/off ratio is also achieved by varying the single process parameter of contact metal film force (film stress $\times$ film thickness).
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
The curious case of CO$_2$ dissociation on Cu(110)
Authors:
Saurabh Kumar Singh,
Pranav R. Shirhatti
Abstract:
Dissociation of CO$_2$ on copper surfaces, a model system for understanding the elementary steps in catalytic conversion of CO$_2$ to methanol has been extensively studied in the past. It is thought to be reasonably well-understood from both experiments and theory. In contrast, our findings reported here suggest a different picture. Using molecular beam surface scattering methods, we measure the i…
▽ More
Dissociation of CO$_2$ on copper surfaces, a model system for understanding the elementary steps in catalytic conversion of CO$_2$ to methanol has been extensively studied in the past. It is thought to be reasonably well-understood from both experiments and theory. In contrast, our findings reported here suggest a different picture. Using molecular beam surface scattering methods, we measure the initial dissociation probabilities ($S_{\rm 0}$) of CO$_2$ on a flat, clean Cu(110) surface under ultra-high vacuum conditions. The observed $S_{\rm 0}$ ranges from $3.9\times10^{-4}$ to $1.8\times10^{-2}$ at incidence energies of 0.64 eV to 1.59 eV with a lower limit to dissociation barrier estimated to be around 2.0 eV, much larger than that understood previously. We discuss the possible reasons behind such large differences in our results and previous work. These findings are anticipated to be extremely important for obtaining a correct understanding of elementary steps in CO$_2$ dissociation on Cu surfaces.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
Enhanced interfacial charge transfer by Z-scheme in defect-mediated ZnO-CdS nano-composite with rGO as a solid-state electron mediator for efficient photocatalytic applications
Authors:
Arun Murali,
Rahulkumar Sunil Singh,
Michael L Free,
Prashant K Sarswat
Abstract:
ZnO-based photocatalysts are widely investigated photocatalytic materials for pollutant degradation due to their low cost, abundance, and eco-friendly characteristics. However, the effectiveness of its photocatalytic properties is limited by inherent challenges such as a wide bandgap, photo-corrosion, and rapid recombination of photogenerated charge carriers. In order to overcome these limitations…
▽ More
ZnO-based photocatalysts are widely investigated photocatalytic materials for pollutant degradation due to their low cost, abundance, and eco-friendly characteristics. However, the effectiveness of its photocatalytic properties is limited by inherent challenges such as a wide bandgap, photo-corrosion, and rapid recombination of photogenerated charge carriers. In order to overcome these limitations observed in traditional ZnO photocatalysts and enhance their photocatalytic properties, an alternative approach has been proposed. This study introduces an oxygen defects-mediated Z-scheme mechanism for charge separation in the heterojunction by coupling Ov-ZnO with CdS, alongside the incorporation of rGO as an electron mediator. This mechanism aims to enhance the photostability and visible-light-induced photocatalysis properties of ZnO. Our work focuses on the development and characterization of trinary Ov-ZnO-rGO-CdS pho-to-catalysts, aiming to enhance their photocatalytic properties for efficient energy conversion and environmental applications. To characterize the trinary Ov-ZnO-rGO-CdS photocatalysts, we employed a range of characterization techniques, including X-ray diffraction, Raman spectroscopy, UV-Visible spectroscopy, Electrochemical impedance spectroscopy, Photo-luminescence spectroscopy, and X-ray photoelectron spectroscopy. This approach not only provides insights into the defect-dependent interfacial mechanism in heterostructure nanocomposites but also opens promising possibilities for develo** high-performance ZnO-based photocatalysts for energy conversion and environmental applications
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Effect of Pb addition on microstructure, transport properties and the critical current density in a polycrystalline FeSe0.5Te0.5
Authors:
Shiv J. Singh,
Ryszard Diduszko,
Przemysław Iwanowski,
Tomasz Cetner,
Andrzej Wisniewski,
Andrzej Morawski
Abstract:
We have investigated the effects of lead (Pb) additions (x) up to 40 wt.% (x = 0-0.4) on the structure, electrical properties, and magnetic properties of FeSe0.5Te0.5 superconductor. The samples were prepared by the solid-state reaction method and characterized by various techniques. The parent compound (x = 0) showed the onset temperature Tc onset of 15 K, and zero-resistance temperature, Tc offs…
▽ More
We have investigated the effects of lead (Pb) additions (x) up to 40 wt.% (x = 0-0.4) on the structure, electrical properties, and magnetic properties of FeSe0.5Te0.5 superconductor. The samples were prepared by the solid-state reaction method and characterized by various techniques. The parent compound (x = 0) showed the onset temperature Tc onset of 15 K, and zero-resistance temperature, Tc offset of 12 K. The addition of Pb enhances the metallic characteristics of FeSe0.5Te0.5, but both Tc onset and Tc offset are decreased to the lower temperature with the broadened transition width. The Tc onset is nearly the same (10.3 K) at higher additions, such as x = 0.3 and 0.4, but zero resistivity is not observed up to 7 K. Microstructural analysis and transport studies suggest that for x > 0.05, Pb additions weakened the coupling between grains and suppressed the superconducting percolation, leading to a broad transition. More importantly, the inclusion of a relatively small amount of Pb (x = 0.05) increased the critical current density, Jc, in the entire magnetic field, which might be attributable to better phase uniformity as well as good grain connectivity.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Cometal addition effect on superconducting properties and granular behaviours of polycrystalline FeSe0.5Te0.5
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pur…
▽ More
The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pure FeSe0.5Te0.5 by 1 K, sharpening the superconducting transition and improving the metallic nature in the normal state, whereas larger metal additions reduce Tconset by broadening the superconducting transition. Microstructural analysis and transport studies suggest that at x=y>0.02, Pb and Sn additions enhance the impurity phases, reduce the coupling between grains, and suppress the superconducting percolation, leading to a broad transition. FeSe0.5Te0.5 samples with 2wt% of cometal additions show the best performance with their critical current density, Jc, and the pinning force, Fp, which might be attributable to providing effective flux pinning centres. Our study shows that the inclusion of a relatively small amount of Pb and Sn works effectively for the enhancement of superconducting properties with an improvement of intergrain connections as well as better phase uniformity.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
High-pressure synthesis and the enhancement of the superconducting properties of FeSe0.5Te0.5
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Jarosław Więckowski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk…
▽ More
A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk samples under a range of growth pressures using Ta-tube and without Tatube. The parent compound synthesized by convenient synthesis method at ambient pressure (CSP) exhibits a superconducting transition temperature of 14.8 K. Our data demonstrate that the prepared FeSe0.5Te0.5 sealed in a Ta-tube is of better quality than the samples without a Ta-tube, and the optimum growth conditions (500 MPa, 600°C for 1 h) are favourable for the development of the tetragonal FeSe0.5Te0.5 phase. The optimum bulk FeSe0.5Te0.5 depicts a higher transition temperature of 17.3 K and a high critical current density of the order of >10^4 A/cm^2 at 0 T, which is improved over the entire magnetic field range and almost twice higher than the parent compound prepared through CSP. Our studies confirm that the high-pressure synthesis method is a highly efficient way to improve the superconducting transition, grain connectivity, sample density, and also pinning properties of a superconductor.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Metal Oxide-based Gas Sensor Array for the VOCs Analysis in Complex Mixtures using Machine Learning
Authors:
Shivam Singh,
Sajana S,
Poornima,
Gajje Sreelekha,
Chandranath Adak,
Rajendra P. Shukla,
Vinayak Kamble
Abstract:
Detection of Volatile Organic Compounds (VOCs) from the breath is becoming a viable route for the early detection of diseases non-invasively. This paper presents a sensor array with three metal oxide electrodes that can use machine learning methods to identify four distinct VOCs in a mixture. The metal oxide sensor array was subjected to various VOC concentrations, including ethanol, acetone, tolu…
▽ More
Detection of Volatile Organic Compounds (VOCs) from the breath is becoming a viable route for the early detection of diseases non-invasively. This paper presents a sensor array with three metal oxide electrodes that can use machine learning methods to identify four distinct VOCs in a mixture. The metal oxide sensor array was subjected to various VOC concentrations, including ethanol, acetone, toluene and chloroform. The dataset obtained from individual gases and their mixtures were analyzed using multiple machine learning algorithms, such as Random Forest (RF), K-Nearest Neighbor (KNN), Decision Tree, Linear Regression, Logistic Regression, Naive Bayes, Linear Discriminant Analysis, Artificial Neural Network, and Support Vector Machine. KNN and RF have shown more than 99% accuracy in classifying different varying chemicals in the gas mixtures. In regression analysis, KNN has delivered the best results with R2 value of more than 0.99 and LOD of 0.012, 0.015, 0.014 and 0.025 PPM for predicting the concentrations of varying chemicals Acetone, Toluene, Ethanol, and Chloroform, respectively in complex mixtures. Therefore, it is demonstrated that the array utilizing the provided algorithms can classify and predict the concentrations of the four gases simultaneously for disease diagnosis and treatment monitoring.
△ Less
Submitted 14 February, 2024; v1 submitted 13 July, 2023;
originally announced July 2023.
-
Polarization Imaging and Edge Detection with Image-Processing Metasurfaces
Authors:
Michele Cotrufo,
Sahitya Singh,
Akshaj Arora,
Alexander Majewski,
Andrea Alù
Abstract:
Optical metasurfaces have been recently explored as ultrathin analog image differentiators. By tailoring the momentum transfer function, they can perform efficient Fourier-filtering - and thus potentially any linear mathematical operation - on an input image, replacing bulky 4f systems. While this approach has been investigated in different platforms, and several techniques have been explored to a…
▽ More
Optical metasurfaces have been recently explored as ultrathin analog image differentiators. By tailoring the momentum transfer function, they can perform efficient Fourier-filtering - and thus potentially any linear mathematical operation - on an input image, replacing bulky 4f systems. While this approach has been investigated in different platforms, and several techniques have been explored to achieve the required angular response, little effort has been devoted so far to tailor and control also the polarization response of an image-processing metasurface. Here, we show that edge-detection metasurfaces can be designed with tailored polarization responses while simultaneously preserving an isotropic response. In particular, we demonstrate single-layer silicon metasurfaces yielding efficient Laplacian operation on a 2D image with either large polarization asymmetry, or nearly polarization-independent response. In the former case, we show that a strongly asymmetric polarization response can be used to unlock more sophisticated on-the-fly image processing functionalities, such as dynamically tunable direction-dependent edge detection. In parallel, metasurfaces with dual-polarized response are shown to enable efficient operation for unpolarized or arbitrarily polarized images, ensuring high efficiency. For both devices, we demonstrate edge detection within relatively large numerical apertures, with excellent isotropy and intensity throughput. Our study paves the way for the broad use of optical metasurfaces for sophisticated, massively parallel analog image processing with zero energy requirements.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.