Showing 1–50 of 63 results for author: Singh, D

Photoemission Spectroscopy on photoresist materials: A protocol for analysis of radiation sensitive materials

Authors: Faegheh S. Sajjadian, Laura Galleni, Kevin M. Dorney, Dhirendra P. Singh, Fabian Holzmeier, Michiel J. van Setten, Stefan De Gendt, Thierry Conard

Abstract: Device architectures and dimensions are now at an unimaginable level not thought possible even 10 years ago. The continued downscaling, following the so-called Moore's law, has motivated the development and use of extreme ultraviolet (EUV) lithography scanners with specialized photoresists. Since the quality and precision of the transferred circuit pattern is determined by the EUV induced chemical… ▽ More Device architectures and dimensions are now at an unimaginable level not thought possible even 10 years ago. The continued downscaling, following the so-called Moore's law, has motivated the development and use of extreme ultraviolet (EUV) lithography scanners with specialized photoresists. Since the quality and precision of the transferred circuit pattern is determined by the EUV induced chemical changes in the photoresist, having a deep understanding of these chemical changes is of pivotal importance. For this purpose, several spectroscopic and material characterization techniques have already been employed so far. Among them, photoemission can be essential as it not only allows direct probing of chemical bonds in a quantitative way but also provides useful information regarding the generation and distribution of primary and secondary electrons. However, since high energy photons are being employed for characterization of a photosensitive material, modification of the sample during the measurement is possible and this must be considered when investigating the chemical changes in the photoresist before and after exposure to EUV light. △ Less

Submitted 30 May, 2024; originally announced June 2024.

Journal ref: J. Vac. Sci. Technol. A 41, 053206 (2023)

Low-energy Injection and Nonthermal Particle Acceleration in Relativistic Magnetic Turbulence

Authors: Divjyot Singh, Omar French, Fan Guo, Xiaocan Li

Abstract: Relativistic magnetic turbulence has been proposed as a process for producing nonthermal particles in high-energy astrophysics. The particle energization may be contributed by both magnetic reconnection and turbulent fluctuations, but their interplay is poorly understood. It has been suggested that during magnetic reconnection the parallel electric field dominates the particle acceleration up to t… ▽ More Relativistic magnetic turbulence has been proposed as a process for producing nonthermal particles in high-energy astrophysics. The particle energization may be contributed by both magnetic reconnection and turbulent fluctuations, but their interplay is poorly understood. It has been suggested that during magnetic reconnection the parallel electric field dominates the particle acceleration up to the lower bound of the power-law particle spectrum, but recent studies show that electric fields perpendicular to the magnetic field can play an important, if not dominant role. In this study, we carry out fully kinetic particle-in-cell simulations of magnetically dominated decaying turbulence in a relativistic pair plasma. For a fixed magnetization parameter $σ_0 = 20$, we find that the injection energy~$\varepsilon_{\rm inj}$ converges with increasing domain size to~$\varepsilon_{\rm inj} \simeq 10 \, m_ec^2$. In contrast, the power-law index, the cut-off energy, and the power-law extent increase steadily with domain size. We trace a large number of particles and evaluate the contributions of the work done by the parallel ($W_\parallel$) and perpendicular ($W_\perp$) electric fields during both the injection phase and the post-injection phase. We find that during the injection phase, the $W_\perp$ contribution increases with domain size, suggesting that it may eventually dominate injection for a sufficiently large domain. In contrast, both components contribute equally during the post-injection phase, insensitive to the domain size. For high energy ($\varepsilon \gg \varepsilon_{\rm inj}$) particles, $W_\perp$ dominates the subsequent energization. These findings may improve our understanding of nonthermal particles and their emissions in astrophysical plasmas. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: 11 pages, 7 figures, 1 animation, Submitted to ApJ

Optical anisotropy and nonlinearity in deep ultraviolet fluorooxoborates

Authors: Bing-Hua Lei, Chao Cao, David J. Singh

Abstract: Optical anisotropy and nonlinearity are two tantalizingly important and enticing properties of an optical crystal. Combining these two features will have a miraculous effect. The up conversion can extend solid state laser sources to the ultraviolet and deep ultraviolet (DUV) ranges through harmonic generation and for down conversion needed for quantum information technology, but only a few suitabl… ▽ More Optical anisotropy and nonlinearity are two tantalizingly important and enticing properties of an optical crystal. Combining these two features will have a miraculous effect. The up conversion can extend solid state laser sources to the ultraviolet and deep ultraviolet (DUV) ranges through harmonic generation and for down conversion needed for quantum information technology, but only a few suitable materials are known as the medium because of the combination of properties that are required. These include suitable band gaps, moderate optical anisotropy for phase matching and strong nonlinear optical (NLO) response. Fluorooxoborates are a new ideal platform for this effect in DUV. Here we demonstrate that fluorooxoborate is the optimal framework for DUV NLO material and show that the significance of the incorporation of fluorine in borates. The NLO performance of fluorooxoborates is strongly improved in terms of local crystal structure and distribution of electronic states. Importantly, the role of fluorine is to control the structure, while maintaining high band gaps but does not directly provide large contributions to birefringence and the second harmonic generation as the conventional assumptions. This is a consequence of the microscopic electron distribution and the energy position of the fluorine states well below the valence band maxima. Based on our understandings, we constructed two artificial structure and they all behave as anticipated. △ Less

Submitted 20 December, 2023; v1 submitted 4 December, 2023; originally announced December 2023.

Comments: This manuscript contain many errors

Time-resolved laser speckle contrast imaging (TR-LSCI) of cerebral blood flow

Authors: Faraneh Fathi, Siavash Mazdeyasna, Dara Singh, Chong Huang, Mehrana Mohtasebi, Xuhui Liu, Samaneh Rabienia Haratbar, Mingjun Zhao, Li Chen, Arin Can Ulku, Paul Mos, Claudio Bruschini, Edoardo Charbon, Lei Chen, Guoqiang Yu

Abstract: To address many of the deficiencies in optical neuroimaging technologies such as poor spatial resolution, time-consuming reconstruction, low penetration depth, and contact-based measurement, a novel, noncontact, time-resolved laser speckle contrast imaging (TR-LSCI) technique has been developed for continuous, fast, and high-resolution 2D map** of cerebral blood flow (CBF) at different depths of… ▽ More To address many of the deficiencies in optical neuroimaging technologies such as poor spatial resolution, time-consuming reconstruction, low penetration depth, and contact-based measurement, a novel, noncontact, time-resolved laser speckle contrast imaging (TR-LSCI) technique has been developed for continuous, fast, and high-resolution 2D map** of cerebral blood flow (CBF) at different depths of the head. TR-LSCI illuminates the head with picosecond-pulsed, coherent, widefield near-infrared light and synchronizes a newly developed, high-resolution, gated single-photon avalanche diode camera (SwissSPAD2) to capture CBF maps at different depths. By selectively collecting diffuse photons with longer pathlengths through the head, TR-LSCI reduces partial volume artifacts from the overlying tissues, thus improving the accuracy of CBF measurement in the deep brain. CBF map reconstruction was dramatically expedited by incorporating highly parallelized computation. The performance of TR-LSCI was evaluated using head-simulating phantoms with known properties and in-vivo rodents with varied hemodynamic challenges to the brain. Results from these pilot studies demonstrated that TR-LSCI enabled map** CBF variations at different depths with a sampling rate of up to 1 Hz and spatial resolutions ranging from tens of micrometers on the head surface to 1-2 millimeters in the deep brain. With additional improvements and validation in larger populations against established methods, we anticipate offering a noncontact, fast, high-resolution, portable, and affordable brain imager for fundamental neuroscience research in animals and for translational studies in humans. △ Less

Submitted 23 September, 2023; originally announced September 2023.

Comments: 22 pages, 7 figures, 4 tables

High-Index Topological Insulator Resonant Nanostructures from Bismuth Selenide

Authors: Sukanta Nandi, Shany Z. Cohen, Danveer Singh, Michal Poplinger, Pilkhaz Nanikashvili, Doron Naveh, Tomer Lewi

Abstract: Topological insulators (TIs) are a class of materials characterized by an insulting bulk and high mobility topologically protected surface states, making them promising candidates for future optoelectronic and quantum devices. Although their electronic and transport properties have been extensively studied, their optical properties and prospective photonic capabilities have not been fully uncovere… ▽ More Topological insulators (TIs) are a class of materials characterized by an insulting bulk and high mobility topologically protected surface states, making them promising candidates for future optoelectronic and quantum devices. Although their electronic and transport properties have been extensively studied, their optical properties and prospective photonic capabilities have not been fully uncovered. Here, we use a combination of far-field and near-field nanoscale imaging and spectroscopy, to study CVD grown Bi2Se3 nanobeams (NBs). We first extract the mid-infrared (MIR) optical constants of Bi2Se3, revealing refractive index values as high as n ~6.4, and demonstrate that the NBs support Mie-resonances across the MIR. Local near-field reflection phase map** reveals domains of various phase shifts, providing information on the local optical properties of the NBs. We experimentally measure up to 2π phase-shift across the resonance, in excellent agreement with FDTD simulations. This work highlights the potential of TI Bi2Se3 for quantum circuitry, non-linear generation, high-Q metaphotonics, and IR photodetection. △ Less

Submitted 18 August, 2023; originally announced August 2023.

Piezo-resistive pressure sensor based on CVD-grown ZnO nanowires on Polyethylene Tetrathalate substrate

Authors: Manisha Kumari, Rakesh K. Prasad, Manish K. Singh, Parameswar K. Iyer, Dilip K. Singh

Abstract: Recent developments in the domain of electronic materials and devices have attracted the interest of researchers toward flexible and printable electronic components like organic transistors, printable electrodes and sensors. Zinc Oxide (ZnO) nanowires (NWs) possess a number of excellent properties like high mobility, large exciton binding energy and the direct-band gap in addition to large piezoel… ▽ More Recent developments in the domain of electronic materials and devices have attracted the interest of researchers toward flexible and printable electronic components like organic transistors, printable electrodes and sensors. Zinc Oxide (ZnO) nanowires (NWs) possess a number of excellent properties like high mobility, large exciton binding energy and the direct-band gap in addition to large piezoelectric coefficients. Here, we report on flexible piezo-resistive sensor based on Indium tin oxide (ITO)-coated Polyethylene tetrathalate (PET) substrate. The device shows sensitivity in terms of change in resistance from 100 Ω to 2.4 KΩ at an applied potential of 5V upon bending from flat to 95 degrees. The 1-D nanowire flexible device in its flat state shows saturated output current. We observed ten folds enhanced variation as compared to previous reports. Improved sensitivity was observed in our experiments due to fewer defects in CVD-grown NWs as compared to others where hydrothermally grown nanowires were used. The methodology of device fabrication reported here requires less time and enables efficient devices for the realization of flexible and wearable technology. △ Less

Submitted 16 June, 2023; originally announced July 2023.

Comments: 24 pages, 5 figures

High-Efficiency Photodetector Based On CVD-Grown WS$_2$ Monolayer

Authors: Rakesh K. Prasad, Koushik Ghosh, P. K. Giri, Dai-Sik Kim, Dilip K. Singh

Abstract: Future generation technologies demand high efficiency photodetectors to enable sensing and switching devices for ultrafast communication and machine vision. This require direct-band gap materials with high photosensitivity, high detectivity and high quantum efficiency. Monolayered two- Dimensional (2D)-Semiconductors based photodetectors are the most promising materials for such applications, alth… ▽ More Future generation technologies demand high efficiency photodetectors to enable sensing and switching devices for ultrafast communication and machine vision. This require direct-band gap materials with high photosensitivity, high detectivity and high quantum efficiency. Monolayered two- Dimensional (2D)-Semiconductors based photodetectors are the most promising materials for such applications, although experimental realization has been limited due to unavailability of high quality sample. In the current manuscript, we report about WS$_2$ based photodetector having sensitivity of 290 AW-1 upon 405 nm excitation and incident power density as low as 0.06 mW/cm$^2$. The fabricated device shows detectivity of 52*10^14 with external quantum efficiency of 89*10$^3$%. The observed superior photo-response parameters of CVD grown WS$_2$ based photodetector as compared to Si-detectors establishes it capability to replace the Si-photodetectors with monolayered ultrathin device having superior performance parameters. △ Less

Submitted 6 March, 2023; originally announced March 2023.

Comments: 26 Pages, 8 figures

Chemically induced ferromagnetism near room temperature in single crystal (Zn$_{1-x}$Cr$_{x}$)Te half-metal

Authors: J. Guo, A. Sarikhani, P. Ghosh, T. Heitmann, Y. S. Hor, D. K. Singh

Abstract: Magnetic semiconductors are at the core of recent spintronics research endeavors. Chemically doped II-VI diluted magnetic semiconductors, such as (Zn$_{1-x}$Cr$_{x}$)Te, provide promising platform in this quest. However, a detailed knowledge of the microscopic nature of magnetic ground state is necessary for any practical application. Here, we report on the synergistic study of (Zn$_{1-x}$Cr… ▽ More Magnetic semiconductors are at the core of recent spintronics research endeavors. Chemically doped II-VI diluted magnetic semiconductors, such as (Zn$_{1-x}$Cr$_{x}$)Te, provide promising platform in this quest. However, a detailed knowledge of the microscopic nature of magnetic ground state is necessary for any practical application. Here, we report on the synergistic study of (Zn$_{1-x}$Cr$_{x}$)Te single crystals using elastic neutron scattering measurements and density functional calculations. For the first time, our research unveils the intrinsic properties of ferromagnetic state in macroscopic specimen of (Zn$_{0.8}$Cr$_{0.2}$)Te. The ferromagnetism is onset at $T_c \sim$ 290 K and remains somewhat independent to modest change in the substitution coefficient x. We show that magnetic moments on Zn/Cr site develop ferromagnetic correlation in a-c plane with large ordered moment of $μ$ = 3.08 $μ_B$. Magnetic moment across the lattice is induced via the mediation of Te site, uncoupled to the number of dopant carriers as inferred from the density functional calculation. Additionally, the ab-initio calculations also reveal half-metallicity in x = 0.2 composition. These properties are highly desirable for future spintronic applications. △ Less

Submitted 16 March, 2023; originally announced March 2023.

Journal ref: RSC Advances, 2023, 13, 8551-8556

Transfer Learning Enhanced Full Waveform Inversion

Authors: Stefan Kollmannsberger, Divya Singh, Leon Herrmann

Abstract: We propose a way to favorably employ neural networks in the field of non-destructive testing using Full Waveform Inversion (FWI). The presented methodology discretizes the unknown material distribution in the domain with a neural network within an adjoint optimization. To further increase efficiency of the FWI, pretrained neural networks are used to provide a good starting point for the inversion.… ▽ More We propose a way to favorably employ neural networks in the field of non-destructive testing using Full Waveform Inversion (FWI). The presented methodology discretizes the unknown material distribution in the domain with a neural network within an adjoint optimization. To further increase efficiency of the FWI, pretrained neural networks are used to provide a good starting point for the inversion. This reduces the number of iterations in the Full Waveform Inversion for specific, yet generalizable settings. △ Less

Submitted 1 December, 2023; v1 submitted 22 February, 2023; originally announced February 2023.

Comments: 7 pages, 5 figures

Temperature Invariant Metasurfaces

Authors: Shany Zrihan Cohen, Danveer Singh, Sukanta Nandi, Tomer Lewi

Abstract: Thermal effects are well known to influence the electronic and optical properties of materials through several physical mechanisms and are the basis for various optoelectronic devices. The thermo-optic (TO) effect - the refractive index variation with temperature (dn/dT), is one of the common mechanisms used for tunable optical devices, including integrated optical components, metasurfaces and nan… ▽ More Thermal effects are well known to influence the electronic and optical properties of materials through several physical mechanisms and are the basis for various optoelectronic devices. The thermo-optic (TO) effect - the refractive index variation with temperature (dn/dT), is one of the common mechanisms used for tunable optical devices, including integrated optical components, metasurfaces and nano-antennas. However, when a static and fixed operation is required, i.e., temperature invariant performance - this effect becomes a drawback and may lead to undesirable behavior through drifting of the resonance frequency, amplitude, or phase, as the operating temperature varies over time. In this work, we present a systematic approach to mitigate thermally induced optical fluctuations in nanophotonic devices. By using hybrid subwavelength resonators composed from two materials with opposite TO dispersions (dn/dT<0 and dn/dT>0), we are able to compensate for TO shifts and engineer meta-atoms and metasurfaces with zero effective TO coefficient (dn/dT~0). We demonstrate temperature invariant resonant frequency, amplitude, and phase response in meta-atoms and metasurfaces operating across a wide temperature range and broad spectral band. Our results highlight a path towards temperature invariant nanophotonics, which can provide constant and stable optical response across a wide range of temperatures and be applied to a plethora of optoelectronic devices. Controlling the sign and magnitude of TO dispersion extends the capabilities of light manipulation and adds another layer to the toolbox of optical engineering in nanophotonic systems. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Saturating the Maximum Success Probability Bound for Noiseless Linear Amplification using Linear Optics

Authors: Joshua J. Guanzon, Matthew S. Winnel, Deepesh Singh, Austin P. Lund, Timothy C. Ralph

Abstract: A noiseless linear amplifier (NLA) performs the highest quality amplification allowable under the rules of quantum physics. Unfortunately, these same rules conspire against us via the no-cloning theorem, which constrains NLA operations to the domain of probabilistic processes. Nevertheless, they are useful for a wide variety of quantum protocols, with numerous proposals assuming access to an optim… ▽ More A noiseless linear amplifier (NLA) performs the highest quality amplification allowable under the rules of quantum physics. Unfortunately, these same rules conspire against us via the no-cloning theorem, which constrains NLA operations to the domain of probabilistic processes. Nevertheless, they are useful for a wide variety of quantum protocols, with numerous proposals assuming access to an optimal NLA device which performs with the maximum possible success probability. Here we propose the first linear optics NLA protocol which asymptotically achieves this success probability bound, by modifying the Knill-Laflamme-Milburn near-deterministic teleporter into an amplifier. △ Less

Submitted 26 October, 2023; v1 submitted 8 December, 2022; originally announced December 2022.

Comments: 11 pages, 5 figures. Updated references

Penetrative convection in nocturnal atmospheric boundary layer and radiation fog

Authors: Shaurya Kaushal, D. K. Singh, K. R. Sreenivas

Abstract: After the sunset, under calm and clear sky conditions, aerosol laden surface air-layer, cools radiatively to the upper atmosphere. Predominant effect of the radiative cooling on the vertical temperature profile extends to several hundred meters from the surface. This results in the development of a stable, nocturnal inversion layer. However, ground surface, owing to its higher thermal inertia, lag… ▽ More After the sunset, under calm and clear sky conditions, aerosol laden surface air-layer, cools radiatively to the upper atmosphere. Predominant effect of the radiative cooling on the vertical temperature profile extends to several hundred meters from the surface. This results in the development of a stable, nocturnal inversion layer. However, ground surface, owing to its higher thermal inertia, lags in the cooling process. Due to this about a meter thick air layer just above the ground can be (2-6)deg Celsius cooler than the ground. Thus, at the surface an unstable convective layer is present, which is capped by a stable inversion layer that extends up to several hundred meters. This configuration involving a convective mixed layer topped by a stably stratified inversion layer is a classic case of penetrative convection. Micrometeorological phenomenon at the surface, such as occurrence of fog, is determined by temperature profile, heat and moisture transport from the ground. Here, we present a computational study of the model penetrative convection, formed due to radiative cooling, in the nocturnal atmospheric boundary layer. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Deep-subwavelength resonant metaphotonics enabled by high-index topological insulator bismuth telluride

Authors: Danveer Singh, Sukanta Nandi, Yafit Fleger, Shany Z. Cohen, Tomer Lewi

Abstract: In nanophotonics, small mode volumes, high-quality factor (Q) resonances, and large field enhancements without metals, fundamentally scale with the refractive index and are key for many implementations involving light-matter interactions. Topological insulators (TI) are a class of insulating materials that host topologically protected surface states, some of which exhibit extraordinary high permit… ▽ More In nanophotonics, small mode volumes, high-quality factor (Q) resonances, and large field enhancements without metals, fundamentally scale with the refractive index and are key for many implementations involving light-matter interactions. Topological insulators (TI) are a class of insulating materials that host topologically protected surface states, some of which exhibit extraordinary high permittivity values. Here, we study the optical properties of TI bismuth telluride (Bi2Te3) single crystals. We find that both the bulk and surface states contribute to the extremely large optical constants, with the real part of the refractive index peaking at n~11. Utilizing these ultra-high index values, we demonstrate that Bi2Te3 metasurfaces are capable of squeezing light in deep subwavelength structures, with the fundamental magnetic dipole (MD) resonance confined in unit cell size smaller than λ/10. We further show that dense ultrathin metasurface arrays can simultaneously provide large magnetic and electric field enhancements arising from the surface metallic states and the high index of the bulk. These findings demonstrate the potential of chalcogenide TI materials as a platform leveraging the unique combination of ultra-high-index dielectric response with surface metallic states for metamaterial design and nanophotonic applications in sensing, non-linear generation, and quantum information. △ Less

Submitted 6 September, 2022; v1 submitted 16 August, 2022; originally announced August 2022.

Propulsive performance of morphing and heaving foil

Authors: Pragalbh Dev Singh, Ishan Neogi, Vardhan Niral Shah, Vaibhav Joshi

Abstract: Biological locomotion, observed in the flexible wings of birds and insects, bodies and fins of aquatic mammals and fishes, consists of their ability to morph the wings/fins. The morphing capability holds significance in the abilities of fishes to swim upstream without spending too much energy and that of birds to glide for extended periods of time. Simplifying the wing or fins to a foil, morphing… ▽ More Biological locomotion, observed in the flexible wings of birds and insects, bodies and fins of aquatic mammals and fishes, consists of their ability to morph the wings/fins. The morphing capability holds significance in the abilities of fishes to swim upstream without spending too much energy and that of birds to glide for extended periods of time. Simplifying the wing or fins to a foil, morphing refers to the ability of the foil to change its camber smoothly, without sharp bends on the foil surface. This allows precise control over flow separation and vortex shedding. Compared to conventional trailing-edge extensions or flaps, used in rudders and elevators in submarines and ships, morphing foils provide better control of thrust and lift characteristics. This study aims at understanding the importance of the morphing of foil combined with a sinusoidal heaving motion on thrust generation. A two-dimensional variational stabilized Petrov-Galerkin moving mesh framework is utilized for modelling the incompressible low Reynolds number flow across the flap** foil. The morphing motion is characterized by the extent of morphing, measured as an angle of deviation from the initial camber, and the point of initiation of morphing on the foil as a percentage of its chord length. The effect of the foil morphing and the heaving motion on the propulsive performance are investigated. The extent of morphing is varied from -30 deg and 30 deg, and the point of initiation ranges from 15% to 50% of the chord. The Reynolds and Strouhal numbers for the study are 1100 and 0.2, respectively. The results from the current work can pave the way for enhanced engineering designs in bio-mimetics and give insights on design conditions for optimal thrust performance. △ Less

Submitted 13 March, 2022; v1 submitted 10 January, 2022; originally announced January 2022.

Comments: 13 pages, 15 figures, Under review to be published in OMAE 2022

Journal ref: ASME 2022 41st International Conference on Ocean, Offshore and Arctic Engineering

Fundamental trade-off between the speed of light and the Fano factor of photon current in three-level lambda systems

Authors: Davinder Singh, Seogjoo J. Jang, Changbong Hyeon

Abstract: Electromagnetically induced slow-light medium is a promising system for quantum memory devices, but controlling its noise level remains a major challenge to overcome. This work considers the simplest model for such medium, comprised of three-level $Λ$-systems interacting with bosonic bath, and provides a new fundamental trade-off relation in light-matter interaction between the group velocity of l… ▽ More Electromagnetically induced slow-light medium is a promising system for quantum memory devices, but controlling its noise level remains a major challenge to overcome. This work considers the simplest model for such medium, comprised of three-level $Λ$-systems interacting with bosonic bath, and provides a new fundamental trade-off relation in light-matter interaction between the group velocity of light and the Fano factor of photon current due to radiative transitions. Considering the steady state limits of a newly derived Lindblad-type equation, we find that the Fano factor of the photon current maximizes to 3 at the minimal group velocity of light, which holds true universally regardless of detailed values of parameters characterizing the medium. △ Less

Submitted 17 January, 2023; v1 submitted 2 January, 2022; originally announced January 2022.

Comments: 14 pages, 5 figures

Journal ref: J. Phys. A: Math. Theor. (2023) 56, 015001

Amorphous Selenium Mie Resonators for Infrared Meta-Optics

Authors: Danveer Singh, Michal Poplinger, Avraham Twitto, Rafi Snitkoff, Pilkhaz Nanikashvili, Ori Azolay, Adi Levi, Chen Stern, Gili Cohen Taguri, Asaf Albo, Doron Naveh, Tomer Lewi

Abstract: Applying direct growth and deposition of optical surfaces holds great promise for the advancement of future nanophotonic technologies. Here, we report on a chemical vapor deposition (CVD) technique for depositing amorphous selenium (a-Se) spheres by desorption of selenium from Bi2Se3 and re-adsorption on the substrate. We utilize this process to grow scalable, large area Se spheres on several subs… ▽ More Applying direct growth and deposition of optical surfaces holds great promise for the advancement of future nanophotonic technologies. Here, we report on a chemical vapor deposition (CVD) technique for depositing amorphous selenium (a-Se) spheres by desorption of selenium from Bi2Se3 and re-adsorption on the substrate. We utilize this process to grow scalable, large area Se spheres on several substrates and characterize their Mie-resonant response in the mid-infrared (MIR) spectral range. We demonstrate size-tunable Mie resonances spanning the 2-16 um spectral range, for single isolated resonators and large area ensembles, respectively. We further demonstrate strong absorption dips of up to 90% in ensembles of particles in a broad MIR range. Finally, we show that ultra-high-Q resonances arise in the case where Se Mie-resonators are coupled to low-loss epsilon-near-zero (ENZ) substrates. These findings demonstrate the enabling potential of amorphous Selenium as a versatile and tunable nanophotonic material that may open up avenues for on-chip MIR spectroscopy, chemical sensing, spectral imaging and large area metasurface fabrication. △ Less

Submitted 30 December, 2021; originally announced December 2021.

Activity-based and agent-based Transport model of Melbourne (AToM): an open multi-modal transport simulation model for Greater Melbourne

Authors: Afshin Jafari, Dhirendra Singh, Alan Both, Mahsa Abdollahyar, Lucy Gunn, Steve Pemberton, Billie Giles-Corti

Abstract: Agent-based and activity-based models for simulating transportation systems have attracted significant attention in recent years. Few studies, however, include a detailed representation of active modes of transportation - such as walking and cycling - at a city-wide level, where dominating motorised modes are often of primary concern. This paper presents an open workflow for creating a multi-modal… ▽ More Agent-based and activity-based models for simulating transportation systems have attracted significant attention in recent years. Few studies, however, include a detailed representation of active modes of transportation - such as walking and cycling - at a city-wide level, where dominating motorised modes are often of primary concern. This paper presents an open workflow for creating a multi-modal agent-based and activity-based transport simulation model, focusing on Greater Melbourne, and including the process of mode choice calibration for the four main travel modes of driving, public transport, cycling and walking. The synthetic population generated and used as an input for the simulation model represented Melbourne's population based on Census 2016, with daily activities and trips based on the Victoria's 2016-18 travel survey data. The road network used in the simulation model includes all public roads accessible via the included travel modes. We compared the output of the simulation model with observations from the real world in terms of mode share, road volume, travel time, and travel distance. Through these comparisons, we showed that our model is suitable for studying mode choice and road usage behaviour of travellers. △ Less

Submitted 15 December, 2021; originally announced December 2021.

Improvement in the performance of multilayer insulation technique and impact in the rare physics search experiments

Authors: D. Singh, M. K. Singh, A. Chaubey, A. K. Ganguly, V. Singh

Abstract: Providing thermal insulation to systems at very low temperature from surroundings, involves blocking the transport of thermal energy regular or enhanced, taking place through radiative, conductive and convective processes. For instance, the enhancement of radiative heat transport that takes place by infra red or far infra red light at low temperature is due to diffractive propagation. The waveleng… ▽ More Providing thermal insulation to systems at very low temperature from surroundings, involves blocking the transport of thermal energy regular or enhanced, taking place through radiative, conductive and convective processes. For instance, the enhancement of radiative heat transport that takes place by infra red or far infra red light at low temperature is due to diffractive propagation. The wavelength of light in this part of the spectrum usually lie in the range of mm to cms. Hence it can get bent across an obstacle while propagating forward. Apart from radiative, the convective and conductive processes also get affected due to appearance of non linearities in the modes of lattice vibrations and anomalies in material transport due to the appearance of vorticity and turbulence in the intervening media. The Multilayer insulation technique has offered a robust thermal protective mechanism to provide proper insulation to the cold walls of the cryostats from the heat of the surroundings. This work is focused on the estimation of performance and efficiency of the MLI technique as well as exploration of its versatile applicability. Three different spacer materials such as Dacron, Glass tissue, and Silk net with radiation shields are selected for the intervening medium in the present study. This article explores the thermal performance of MLI system by changing the physical parameters, varying the geometry of the radiation shields perforation styles of radiation shields and by analyzing the effect of arrangement of radiation shields on the conduction heat load. This analysis is concluded by studying the possibility of using MLI technique in the health sector by reducing the evaporation rate of liquid Oxygen during pandemic situations e.g. in COVID19. △ Less

Submitted 17 July, 2021; originally announced July 2021.

Comments: 34 pages, 13 figures and 08 tables

What will they do? Modelling self-evacuation archetypes

Authors: Dhirendra Singh, Ken Strahan, Jim McLennan, Joel Robertson, Bhagya Wickramasinghe

Abstract: A decade on from the devastating Black Saturday bushfires in Victoria, Australia, we are at a point where computer simulations of community evacuations are starting to be used within the emergency services. While fire progression modelling is embedded in strategic and operational settings at all levels of government across Victoria, modelling of community response to such fires is only just starti… ▽ More A decade on from the devastating Black Saturday bushfires in Victoria, Australia, we are at a point where computer simulations of community evacuations are starting to be used within the emergency services. While fire progression modelling is embedded in strategic and operational settings at all levels of government across Victoria, modelling of community response to such fires is only just starting to be evaluated in earnest. For community response models to become integral to bushfire planning and preparedness, the key question to be addressed is: when faced with a bushfire, what will a community really do? Typically this understanding has come from local experience and expertise within the community and services, however the trend is to move towards more informed data driven approaches. In this paper we report on the latest work within the emergency sector in this space. Particularly, we discuss the application of Strahan et al.'s self-evacuation archetypes to an agent-based model of community evacuation in regional Victoria. This work is part of the consolidated bushfire evacuation modelling collaboration between several emergency management stakeholders. △ Less

Submitted 26 May, 2021; originally announced May 2021.

ACM Class: I.6.3

Chiral Plasmonic Hydrogen Sensors

Authors: Marcus Matuschek, Dhruv Pratap Singh, Hyeon-Ho Jeong, Maxim Nesterov, Thomas Weiss, Peer Fischer, Frank Neubrech, Na Liu

Abstract: In this article, a chiral plasmonic hydrogen-sensing platform using palladium-based nanohelices is demonstrated. Such 3D chiral nanostructures fabricated by nanoglancing angle deposition exhibit strong circular dichroism both experimentally and theoretically. The chiroptical properties of the palladium nanohelices are altered upon hydrogen uptake and sensitively depend on the hydrogen concentratio… ▽ More In this article, a chiral plasmonic hydrogen-sensing platform using palladium-based nanohelices is demonstrated. Such 3D chiral nanostructures fabricated by nanoglancing angle deposition exhibit strong circular dichroism both experimentally and theoretically. The chiroptical properties of the palladium nanohelices are altered upon hydrogen uptake and sensitively depend on the hydrogen concentration. Such properties are well suited for remote and spark-free hydrogen sensing in the flammable range. Hysteresis is reduced, when an increasing amount of gold is utilized in the palladium-gold hybrid helices. As a result, the linearity of the circular dichroism in response to hydrogen is significantly improved. The chiral plasmonic sensor scheme is of potential interest for hydrogen-sensing applications, where good linearity and high sensitivity are required. △ Less

Submitted 30 April, 2021; originally announced May 2021.

Report number: Small (2017)

Defined the predictors of the lightning over India by using artificial neural network

Authors: Pradip Kumar Gautam, Deweshvar Singh

Abstract: Lightning casualties cause tremendous loss to life and property. However, very lately lightning has been considered as one of the major natural calamities which is now studied or monitored with proper instrumentation. The lightning characteristics over India have been studying by using daily data low resolution time series and monthly data high resolution monthly climatology. We have used ANN time… ▽ More Lightning casualties cause tremendous loss to life and property. However, very lately lightning has been considered as one of the major natural calamities which is now studied or monitored with proper instrumentation. The lightning characteristics over India have been studying by using daily data low resolution time series and monthly data high resolution monthly climatology. We have used ANN time series method (a neural network) to analyze the time series and defined which one will be the best predictor of lightning over India. The time series of lightning is output(dependent) and input (independent) are k-index, AOD, Cape etc. The Gaussian process regression, support vector machine, regression trees and linear regression defined the input variables. Which show approximately linear relation. △ Less

Submitted 28 April, 2021; originally announced April 2021.

Building the road network for city-scale active transport simulation models

Authors: Afshin Jafari, Alan Both, Dhirendra Singh, Lucy Gunn, Billie Giles-Corti

Abstract: In this paper, we introduce and test our algorithm to create a road network representation for city-scale active transportation simulation models. The algorithm relies on open and universal data to ensure applicability for different cities around the world. In addition to the major roads, their geometries and the road attributes typically used in transport modelling (e.g., speed limit, number of l… ▽ More In this paper, we introduce and test our algorithm to create a road network representation for city-scale active transportation simulation models. The algorithm relies on open and universal data to ensure applicability for different cities around the world. In addition to the major roads, their geometries and the road attributes typically used in transport modelling (e.g., speed limit, number of lanes, permitted travel modes), the algorithm also captures minor roads usually favoured by pedestrians and cyclists, along with road attributes such as bicycle-specific infrastructure, traffic signals, and road gradient. Furthermore, it simplifies the network's complex geometries and merges parallel roads if applicable to make it suitable for large-scale simulations. To examine the utility and performance of the algorithm, we used it to create a network representation for Greater Melbourne, Australia and compared the output with a network created using an existing transport simulation toolkit along with another network from an existing city-scale transport model from the Victorian government. Through simulation experiments with these networks, we illustrated that our algorithm achieves a very good balance between simulation accuracy and run-time. For routed trips on our network for walking and cycling it is of comparable accuracy to the common network conversion tools in terms of travel distances of the shortest paths while being more than two times faster when used for simulating different sample sizes. Therefore, our algorithm offers a flexible solution for building accurate and efficient road networks for city-scale active transport models for different cities around the world. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Pulse shape simulation of p-type Point Contact Germanium Detector for The MAJORONA DEMONSTRATOR Experiment

Authors: Akash Pandey, D. Singh, V. Singh

Abstract: In the rare physics events search, liquid and solid detector plays an important role. Its analysis is based on the detection of excess events over the expected background or on the detection of an annual event rate modulation. Germanium detectors sensitivities have been demonstrated as efficient means to probe Weakly Interacting Massive Particles (WIMPs). Germanium detectors having sensitivity les… ▽ More In the rare physics events search, liquid and solid detector plays an important role. Its analysis is based on the detection of excess events over the expected background or on the detection of an annual event rate modulation. Germanium detectors sensitivities have been demonstrated as efficient means to probe Weakly Interacting Massive Particles (WIMPs). Germanium detectors having sensitivity less than 100 eV opens new platform for the investigation of neutrinos and dark matter physics. There are various working configuration available for germanium detectors such as semi-coaxial, true coaxial and point contact. The point contact germanium detectors have been widely used for dark matter and low energy neutrino searches because of their sub KeV energy threshold and low electronic noise. Pulse shape of P-type point contact (P-PC) germanium detector has been simulated in the present work and compared to the pulse shape of Majorana Demonstrator(MJD). △ Less

Submitted 17 March, 2021; originally announced March 2021.

Investigation of the dynamics of inner gas during bursting of a bubble at the free surface

Authors: Digvijay Singh, Arup Kumar Das

Abstract: In the present study, simulations are directed to capture the dynamics of evacuating inner gas of a bubble bursting at the free surface, using Eulerian based volume of fluid (VOF) method. The rate by which surrounding air rushing inside the bubble cavity through the inner gas evacuation is estimated and compared by the collapsing bubble cavity during the sequential stages of the bubble bursting at… ▽ More In the present study, simulations are directed to capture the dynamics of evacuating inner gas of a bubble bursting at the free surface, using Eulerian based volume of fluid (VOF) method. The rate by which surrounding air rushing inside the bubble cavity through the inner gas evacuation is estimated and compared by the collapsing bubble cavity during the sequential stages of the bubble bursting at the free surface. Further, the reachability of inner gas over the free surface is evaluated by establishing the comparison of the same through various horizontal planes, lying at different altitudes above the unperturbed surface. The evacuating inner gas accompanies vortex rings, which entrains the surrounding gas-phase. During the successive stages of air entrainment, spatiotemporal characteristics of the vortex ring are obtained. At low Bond numbers (< 1), after comparing the phase contours of evacuating inner gas from the bubble cavity, the consequences at the axial growth of gas jet and the radial expansion of the jet tip is discussed separately. Furthermore, under the respiration process, the axial growth of rising inner gas over the free surface and the radial expansion of vortex rings of a bubble bursting at the free surface is compared with the quiescent surrounding air. At last, the effects of various possible asymmetric perforation of the bubble cap kee** the same Bo are studied. The cause of bent gas jet, as a consequence of perforation of the bubble cap, asymmetrically, is explained by plotting the velocity vectors. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Comments: 31 pages, 15 figures, 2 tables

Single step synthesis of size-controlled carbon quantum dots using electrochemical etching of graphite

Authors: Ashish Gaurav, Deepali Sinha, Rakesh K. Prasad, Dilip K. Singh

Abstract: Carbon Quantum dots (CQD's) are nanoscale sp2 hybridized carbon particles. In this work, we present a simple one-step synthesis of CQDs from the electrochemical shredding method and technique to control its size during its growth process. A graphite rod extracted from commercially available pencil batteries was used as electrode: source of carbon. CQDs of varying sizes were synthesized through con… ▽ More Carbon Quantum dots (CQD's) are nanoscale sp2 hybridized carbon particles. In this work, we present a simple one-step synthesis of CQDs from the electrochemical shredding method and technique to control its size during its growth process. A graphite rod extracted from commercially available pencil batteries was used as electrode: source of carbon. CQDs of varying sizes were synthesized through controlled current to the solution for etching and Sodium dodecyl sulfate (SDS) as cap** agent during growth. CQD's of controlled sizes as formed can be used as fluorescent marker for bio-imaging and sensing platform for wide range of applications. △ Less

Submitted 6 November, 2020; originally announced November 2020.

Comments: 21 Pages, 7 figures

Powered Multifocal THz Radiation by Mixing of Two Skew (ChG) Cosh-Gaussian Laser Beams in Collisional Plasma

Authors: Divya Singh, Hitendra K Malik

Abstract: Considering a realistic situation, where electron-neutral collisions persist in plasma, analytical calculations are carried out for the THz radiation generation by beating of two Skew Cosh-Gaussian (SG) lasers of parameters n & s. The competency of these lasers over Gaussian lasers is discussed in detail with respect to the effects of collision and beam width on the THz field amplitude and efficie… ▽ More Considering a realistic situation, where electron-neutral collisions persist in plasma, analytical calculations are carried out for the THz radiation generation by beating of two Skew Cosh-Gaussian (SG) lasers of parameters n & s. The competency of these lasers over Gaussian lasers is discussed in detail with respect to the effects of collision and beam width on the THz field amplitude and efficiency of the mechanism. A critical transverse distance of the peak of the THz field is defined that shows a dependence on the skewness parameter of skew ChG lasers. Although electron-neutral collisions and larger beam width lead to the drastic reduction in the THz field when the skew ChG lasers are used in the plasma, the efficiency of the mechanism remains much larger than the case of Gaussian lasers. Moreover, the skewChG lasers produce stronger and multifocal THz radiation. △ Less

Submitted 22 July, 2020; originally announced July 2020.

Strong Terahertz Radiation Generation via Wakefield in Collisional Plasma

Authors: Divya Singh, Hitendra K Malik

Abstract: We show that the transverse component of the wakefield can be produced with the application of an external magnetic field that generates radiation in the THz range. For this, we carry out analytical and numerical calculations to evaluate the components of the wakefield in a realistic situation of collisional plasma. We observe that the wakefield in the direction of the external magnetic field is p… ▽ More We show that the transverse component of the wakefield can be produced with the application of an external magnetic field that generates radiation in the THz range. For this, we carry out analytical and numerical calculations to evaluate the components of the wakefield in a realistic situation of collisional plasma. We observe that the wakefield in the direction of the external magnetic field is produced, though the components of the wakefield are observed in the directions parallel and perpendicular to the direction of propagation of the laser and the magnetic field. Based on the approach of perturbation technique under quasi-static approximation, a study is made on the magnitude of emitted radiation pulses from the wakefield for the case of lasers of super-Gaussian profile. The field of THz radiation is found to be enhanced when stronger magnetic field is applied; the same is the case for the lasers of higher index. △ Less

Submitted 22 July, 2020; originally announced July 2020.

Fabrication of Tungsten nanoprobes by Electrochemical etching: Role of cathode geometry and their use as electrical probe

Authors: Rakesh K. Prasad, Dilip K. Singh

Abstract: Electrical measurement of nano-scale devices and structures requires skills and hardware to make nano-contacts. Such measurements have been difficult for number of laboratories due to cost of probe station and nano-probes. In the present work, we have demonstrated possibility of assembling low cost probe station using USB microscope (US $ 30) coupled with in-house developed probe station. We have… ▽ More Electrical measurement of nano-scale devices and structures requires skills and hardware to make nano-contacts. Such measurements have been difficult for number of laboratories due to cost of probe station and nano-probes. In the present work, we have demonstrated possibility of assembling low cost probe station using USB microscope (US $ 30) coupled with in-house developed probe station. We have explored the effect of shape of etching electrodes on the geometry of the microprobes developed. The variation in the geometry of copper wire electrode is observed to affect the probe length (0.58 mm to 2.15 mm) and its half cone angle (1.4 to 8.8 degree). These developed probes were used to make contact on micro patterned metal films and was used for electrical measurement along with semiconductor parameter analyzer. These probes show low contact resistance ( 4 ohm) and follows ohmic behavior. Such probes can be used for laboratories involved in teaching and multidisciplinary research activities and Atomic Force Microscopy. △ Less

Submitted 17 June, 2020; originally announced June 2020.

Comments: 21 pages, 4 figures

Effect of growth temperature on the CVD grown Fe filled multi-walled carbon nanotubes using a modified photoresist

Authors: Joydip Sengupta, Avijit Jana, N. D. Pradeep Singh, Chacko Jacob

Abstract: Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 °C on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 °C, the average diameter of th… ▽ More Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 °C on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 °C, the average diameter of the nanotubes increases while their number density decreases. High resolution transmission electron microscopy along with energy dispersive X-ray investigation shows that the nanotubes have a multi-walled structure with partial Fe filling for all growth temperatures. The graphitic nature of the nanotubes was observed via X-ray diffraction pattern. Raman analysis demonstrates that the degree of graphitization of the carbon nanotubes depends upon the growth temperature. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: A. Nanostructures B. Vapor deposition C. Electron microscopy C. Raman spectroscopy C. X-ray diffraction

Journal ref: Materials Research Bulletin, Volume 45, Issue 9, September 2010, Pages 1189-1193

Establishing the carrier scattering phase diagram for ZrNiSn-based half-Heusler thermoelectric materials

Authors: Qingyong Ren, Chenguang Fu, Qinyi Qiu, Shengnan Dai, Zheyuan Liu, Takatsugu Masuda, Shinichiro Asai, Masato Hagihala, Sanghyun Lee, Shuki Torri, Takashi Kamiyama, Lunhua He, Xin Tong, Claudia Felser, David J. Singh, Tiejun Zhu, Jiong Yang, Jie Ma

Abstract: Chemical do** is one of the most important strategies for tuning electrical properties of semiconductors, particularly thermoelectric materials. Generally, the main role of chemical do** lies in optimizing the carrier concentration, but there can potentially be other important effects. Here, we show that chemical do** plays multiple roles for both electron and phonon transport properties in… ▽ More Chemical do** is one of the most important strategies for tuning electrical properties of semiconductors, particularly thermoelectric materials. Generally, the main role of chemical do** lies in optimizing the carrier concentration, but there can potentially be other important effects. Here, we show that chemical do** plays multiple roles for both electron and phonon transport properties in half-Heusler thermoelectric materials. With ZrNiSn-based half-Heusler materials as an example, we use high-quality single and polycrystalline crystals, various probes, including electrical transport measurements, inelastic neutron scattering measurement, and first-principles calculations, to investigate the underlying electron-phonon interaction. We find that chemical do** brings strong screening effects to ionized impurities, grain boundary, and polar optical phonon scattering, but has negligible influence on lattice thermal conductivity. Furthermore, it is possible to establish a carrier scattering phase diagram, which can be used to select reasonable strategies for optimization of the thermoelectric performance. △ Less

Submitted 22 June, 2020; v1 submitted 25 March, 2020; originally announced March 2020.

Comments: 21 pages, 5 figures

Journal ref: Nature Communications 11, 3142 (2020)

Heat radiation reduction in the cryostat with multilayer insulation technique

Authors: D. Singh, A. Pandey, M. K. Singh, L. Singh, V. Singh

Abstract: Multilayer insulation (MLI) is an important technique for the reduction of radiation heat load in cryostats. The present work is focused on investigation for the selection of suitable reflective layer and spacer material in MLI systems. In our analysis, we have selected perforated double-Aluminized Mylar (DAM) with Dacron, unperforated DAM with Silk-net and perforated DAM with Glass-tissue for the… ▽ More Multilayer insulation (MLI) is an important technique for the reduction of radiation heat load in cryostats. The present work is focused on investigation for the selection of suitable reflective layer and spacer material in MLI systems. In our analysis, we have selected perforated double-Aluminized Mylar (DAM) with Dacron, unperforated DAM with Silk-net and perforated DAM with Glass-tissue for their evaluation as the reflective layer as well as spacer materials in MLI technique. Current work would discuss the calculation of the effect of layer density and the number of layers on the heat load. Knowing the key parameters of MLI, we have compared the heat load generation in spherical as well as cylindrical cryostats and the effect of layering near and outer surface on the heat load. △ Less

Submitted 19 February, 2020; originally announced February 2020.

Comments: 19 pages, Seven Figures, Two Tables

Journal ref: JINST (2020)

Transparent and flexible field-effect transistors and mem-transistors with electroactive layers of solution-processed organic polyradicals

Authors: Deepa Singh, Francois Magnan, Joe B. Gilroy, Giovanni Fanchini

Abstract: Solution processed polymers are at the core of organic electronics. Polyradicals (polymers in which each repeating unit contains an unpaired spin) are unique alternatives to their p-conjugated, semiconducting counterparts. Unique of polyradicals are tunable charge states localized at their repeating units, which enable electrically switchable charge transport regimes. Tremendous efforts were focus… ▽ More Solution processed polymers are at the core of organic electronics. Polyradicals (polymers in which each repeating unit contains an unpaired spin) are unique alternatives to their p-conjugated, semiconducting counterparts. Unique of polyradicals are tunable charge states localized at their repeating units, which enable electrically switchable charge transport regimes. Tremendous efforts were focused on polyradical memristors and batteries. Notwithstanding recent progress in do**, polyradical field-effect transistors (PR-FETs) have not been reported. Here, we show that vertical architectures, with drain-source contacts sandwiching the active layer of a strongly correlated 6-oxoverdazyl polyradical, leads to on/off ratios higher than 10+3 in p-type PR-FETs. Hole injection occurs via contact do** by tunable charge states at the polyradical-electrode interface. Transparent and flexible PR-FETs are also reported. PR-FETs are superior to existing organic FETs as they combine memristor and transistor functions in one mem-transistor device, offering a unique potential for the circuital simplification of organic electronics. △ Less

Submitted 22 October, 2019; originally announced October 2019.

Comments: 18 pages, 6 figures

Site selective synthesis of in situ Ni filled multiwalled carbon nanotubes using Ni(salen) as a catalyst source

Authors: Joydip Sengupta, Avijit Jana, N D Pradeep Singh, C Mitra, Chacko Jacob

Abstract: The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon nanotubes using scanning electron microscopy together with high resolution transmission electron microscopy show that the nanotubes have grown by a tip growth m… ▽ More The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon nanotubes using scanning electron microscopy together with high resolution transmission electron microscopy show that the nanotubes have grown by a tip growth mechanism and exhibit a multi walled structure with partial Ni filling. The high quality of the Ni filled nanotubes is evidenced by Raman spectroscopy. The magnetic properties of Ni filled nanotubes were analyzed using a superconducting quantum interference device which revealed their ferromagnetic behavior with large coercivity. A scalable as well as site selective growth of high quality Ni filled carbon nanotubes is achieved by a simple photolithographic method. △ Less

Submitted 13 August, 2019; originally announced August 2019.

Comments: multiwalled carbon nanotubes,chemical vapor deposition,Ni(salen),photoresist,magnetic properties,coercivity

Journal ref: Nanotechnology, 2010, Volume 21, Number 41, pp 415605

Temperature Tunable Optical Transmission control of VO2 nanostructures by IR based 1-D Photonic crystals as hybrid Photonic absorbers

Authors: Dipti Umed Singh, Omkar Bhoite, Remya Narayanan

Abstract: Effect of 1-D photonic crystals on optical transmission of VO2 is studied by depositing thin films of VO2 nanoparticles on SiO2/TiO2 distributed Bragg reflectors (DBR) in the near infrared (IR) spectrum as per earlier theoretical predictions of J. Phys. D: Appl. Phys. 51 375102 (2018). Monoclinic VO2 nanoparticles with tuned crystallinity were synthesized by a facile solution processing method. Mo… ▽ More Effect of 1-D photonic crystals on optical transmission of VO2 is studied by depositing thin films of VO2 nanoparticles on SiO2/TiO2 distributed Bragg reflectors (DBR) in the near infrared (IR) spectrum as per earlier theoretical predictions of J. Phys. D: Appl. Phys. 51 375102 (2018). Monoclinic VO2 nanoparticles with tuned crystallinity were synthesized by a facile solution processing method. Moderately crystalline (MC) and highly crystalline (HC) VO2 nanostructures were obtained by varying its synthesis temperature and post growth annealing conditions. Both MC VO2 and HC VO2 films exhibit expected reduction in optical transmission in the IR region due to its structural phase transition from monoclinic (insulator) to rutile (metallic) around critical temperature of 68 °C. By combining VO2 films on a 40% transmitting DBR structure, the average optical transmission further went down to ~ 20%. Number of stacks of DBR plays a key role in such effective reduction of optical transmission in IR. When the number of stacks of DBR is further increased from 4 to 7, optical transmission of metallic VO2 films on DBR nearly vanishes in NearIR spectrum in such vanadium dioxide/1D photonic crystal based composite photonic structures. Such temperature controlled, enhanced, broad band optical response can be a promising design for VO2 nanoparticle based hybrid photonic absorbers for various smart window applications. △ Less

Submitted 25 October, 2019; v1 submitted 20 July, 2019; originally announced August 2019.

Lithographically defined site-selective growth of Fe filled multi-walled carbon nanotubes using a modified photoresist

Authors: Joydip Sengupta, Avijit Jana, N. D. Pradeep Singh, Chacko Jacob

Abstract: Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 °C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning electron microscopy revealed that catalytic nanoparticles with an average diameter of 70 nm are formed on the Si substrate which governs the diameter of the MWCNTs. Tr… ▽ More Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 °C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning electron microscopy revealed that catalytic nanoparticles with an average diameter of 70 nm are formed on the Si substrate which governs the diameter of the MWCNTs. Transmission electron microscopy shows that the nanotubes have a multi-walled structure with partial Fe filling. A site-selective growth of partially Fe filled MWCNTs is achieved by a simple photolithographic route. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: Filled CNT, CVD, Partial filling, Photolithography

Journal ref: Carbon, Volume 48, Issue 8, July 2010, Pages 2371-2375

Complex field measurement in a single pixel hybrid correlation holography

Authors: Ziyang Chen, Darshika Singh, Rakesh Kumar Singh, Jixiong Pu

Abstract: We propose a new scheme for recovery of complex valued object in a single-pixel hybrid correlation holography. Idea is to generate an intensity correlation hologram by correlation of the intensity of a single pixel detector and digitally propagated two dimensional intensity patterns. The proposed scheme with theoretical basis is described to reconstruct the objects from a single pixel detector. An… ▽ More We propose a new scheme for recovery of complex valued object in a single-pixel hybrid correlation holography. Idea is to generate an intensity correlation hologram by correlation of the intensity of a single pixel detector and digitally propagated two dimensional intensity patterns. The proposed scheme with theoretical basis is described to reconstruct the objects from a single pixel detector. An experimental arrangement is proposed and as a first step to realize the technique, we have simulated the experimental model for imaging of two different complex objects. △ Less

Submitted 20 November, 2018; v1 submitted 21 October, 2018; originally announced October 2018.

Comments: 4 [ages

Bismuth and Antimony Based Oxyhalides and Chalcohalides as Potential Optoelectronic Materials

Authors: Zhao Ran, Xinjiang Wang, Yuwei Li, Dongwen Yang, Xin-Gang Zhao, Koushik Biswas, David J. Singh, Lijun Zhang

Abstract: In the last decade the ns$^2$ cations (e.g., Pb$^{2+}$ and Sn$^{2+}$) based halides have emerged as one of the most exciting new classes of optoelectronic materials, as exemplified by for instance hybrid perovskite solar absorbers. These materials not only exhibit unprecedented performance in some cases, but they also appear to break new ground with their unexpected properties, such as extreme tol… ▽ More In the last decade the ns$^2$ cations (e.g., Pb$^{2+}$ and Sn$^{2+}$) based halides have emerged as one of the most exciting new classes of optoelectronic materials, as exemplified by for instance hybrid perovskite solar absorbers. These materials not only exhibit unprecedented performance in some cases, but they also appear to break new ground with their unexpected properties, such as extreme tolerance to defects. However, because of the relatively recent emergence of this class of materials, there remain many yet to be fully explored compounds. Here we assess a series of bismuth/antimony oxyhalides and chalcohalides using consistent first principles methods to ascertain their properties and obtain trends. Based on these calculations, we identify a subset consisting of three types of compounds that may be promising as solar absorbers, transparent conductors, and radiation detectors. Their electronic structure, connection to the crystal geometry, and impact on band-edge dispersion and carrier effective mass are discussed. △ Less

Submitted 22 August, 2018; originally announced August 2018.

Comments: 34 papes, 6 figures

Surface texturing of Ti6Al4V alloy using femtosecond laser for superior antibacterial performance

Authors: Shazia Shaikh, Sunita Kedia, Deepti Singh, Mahesh Subramanian, Sucharita Sinha

Abstract: Titanium and its alloy are most widely used implant materials in dental and orthopaedic fields. However, infections occurring during implantation leads to implant failure in most of the cases. Here, we have demonstrated antibacterial behavior of Ti6Al4V alloy achieved when surface modified using femtosecond laser beam. Post laser treatment conical microstructures were observed on the Ti6Al4V alloy… ▽ More Titanium and its alloy are most widely used implant materials in dental and orthopaedic fields. However, infections occurring during implantation leads to implant failure in most of the cases. Here, we have demonstrated antibacterial behavior of Ti6Al4V alloy achieved when surface modified using femtosecond laser beam. Post laser treatment conical microstructures were observed on the Ti6Al4V alloy surface. Generation of different sub-oxide phases of titanium dioxide were detected on laser treated samples using X-ray diffraction and X-ray photoelectron spectroscopy. Wettability of Ti6Al4V alloy surface changed significantly after interaction with the laser. Adhesion and growth of two gram positive; Staphylococcus aureus and Streptococcus mutans and one gram negative Pseudomonas aeruginosa bacteria have been explored on pristine, as well as, on laser textured Ti6Al4V alloy surfaces. In-vitro investigation on agar plate showed inhibition of bacterial growth on most of the laser treated surface. Superior surface roughness and occurrence of magneli phases of titanium dioxide on laser treated surface were probably responsible for the antibacterial behavior exhibited by the laser treated samples. Therefore, femtosecond laser surface treatment of Ti6Al4V alloy could find potential application in the development of infection free medical implants for dental and orthopedic usages. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Comments: 21 pages, 10 figures

Role of Coherence in Excitation Transfer Efficiency to the Reaction Center in Photosynthetic Bacteria Chlorobium Tepidum

Authors: Davinder Singh, Shubhrangshu Dasgupta

Abstract: We investigate the effect of coherence to the excitation transfer efficiency (ETE) in photosynthetic bacteria Chlorobium Tepidum. We have modeled the monomer of Fenna-Matthews-Olson (FMO) complex as consisting of eight bacteriochlorophyll-a sites, while explicitly consider reaction center core complex (RCC) as an additional site. With the use of realistic bath spectrum and several dominant vibroni… ▽ More We investigate the effect of coherence to the excitation transfer efficiency (ETE) in photosynthetic bacteria Chlorobium Tepidum. We have modeled the monomer of Fenna-Matthews-Olson (FMO) complex as consisting of eight bacteriochlorophyll-a sites, while explicitly consider reaction center core complex (RCC) as an additional site. With the use of realistic bath spectrum and several dominant vibronic modes in the non-Markovian master equation, in an effective 9-site model, we have compared the ETE for an initial pure state and an initial mixed state. We observe that the initial pure state relaxes efficiently to increase the trap** at the RCC. We further illustrate that the coherence play a competitive role to block the back transfer of excitation from RCC pigment to FMO complex and hence to maximize the ETE. △ Less

Submitted 25 January, 2018; originally announced January 2018.

Effect of 8th Chromophore: A Comprehensive Study of Excitation Energy Transfer in FMO complex

Authors: Davinder Singh, Shubhrangshu Dasgupta

Abstract: The excitation energy transfer (EET) in Fenna-Matthews-Olson (FMO) complex has been investigated in the presence of realistic inhomogeneous protein environment around different bacteriochlorophyll-a (BChla) sites of a 8-site monomer. We studied the effect of initial coherence and the 8th chromophore on the EET dynamics considering relative orientation of transition dipole moments of all the BChla… ▽ More The excitation energy transfer (EET) in Fenna-Matthews-Olson (FMO) complex has been investigated in the presence of realistic inhomogeneous protein environment around different bacteriochlorophyll-a (BChla) sites of a 8-site monomer. We studied the effect of initial coherence and the 8th chromophore on the EET dynamics considering relative orientation of transition dipole moments of all the BChla sites. We choose femtosecond coherent laser pulse to prepare initial coherent superposition state. Our non-Markovian simulation reveals that the initial coherence between excited states of BChla sites accelerate the excitation energy transfer process as compared to initial mixed state. Even more impressively, in the presence of the 8th chromophore, the initial pure state relaxes much faster than in the 7-site monomer. Hence the inclusion of 8th chromophore additionally enhances the EET relaxation. △ Less

Submitted 15 May, 2018; v1 submitted 14 November, 2017; originally announced November 2017.

Comments: 8th site is considered in article by authors, available on arXiv:1708.00920

Coherence and its Role in Excitation Energy Transfer in Fenna-Mathews-Olson Complex

Authors: Davinder Singh, Shubhrangshu Dasgupta

Abstract: We show that the coherence between different bacteriochlorophyll-a (BChla) sites in the Fenna-Mathews-Olson complex is an essential ingredient for excitation energy transfer between various sites. The coherence delocalizes the excitation energy, which results in the redistribution of excitation among all the BChla sites in the steady state. We further show that the system remains partially coheren… ▽ More We show that the coherence between different bacteriochlorophyll-a (BChla) sites in the Fenna-Mathews-Olson complex is an essential ingredient for excitation energy transfer between various sites. The coherence delocalizes the excitation energy, which results in the redistribution of excitation among all the BChla sites in the steady state. We further show that the system remains partially coherent at the steady state. In our numerical simulation of the non-Markovian density matrix equation, we consider both the inhomogeneity of the protein environment and the effect of active vibronic modes. △ Less

Submitted 2 August, 2017; originally announced August 2017.

Journal ref: J. Phys. Chem. B, 121, 1290-94 (2017)

Role of Initial Coherence in Excitation Energy Transfer in Fenna-Matthews-Olson Complex

Authors: Davinder Singh, Shubhrangshu Dasgupta

Abstract: We theoretically show that the initial coherence plays a crucial role in enhancing the speed of excitation energy transfer (EET) in Fenna-Matthews-Olson (FMO) complex. We choose a simplistic eight-level model considering all the bacateriochlorophyll-a sites in a monomer of FMO complex. We make a comparative numerical study of the EET, in terms of non-Markovian evolution of an initial coherent supe… ▽ More We theoretically show that the initial coherence plays a crucial role in enhancing the speed of excitation energy transfer (EET) in Fenna-Matthews-Olson (FMO) complex. We choose a simplistic eight-level model considering all the bacateriochlorophyll-a sites in a monomer of FMO complex. We make a comparative numerical study of the EET, in terms of non-Markovian evolution of an initial coherent superposition state and a mixed state. A femto-second coherent laser pulse is suitably chosen to create the initial coherent superposition state. Such an initial state relaxes much faster than a mixed state thereby speeding up the EET. In this analysis, we have taken into account the relative orientation of the transition dipole moments of the bacateriochlorophyll-a sites and their relative excitation energies. Our results reveal that for 2D electronic spectroscopy experiments, the existing two-pathway model of energy transfer in FMO complex may not be suitable in our understanding of EET. △ Less

Submitted 22 September, 2017; v1 submitted 2 August, 2017; originally announced August 2017.

Femtosecond laser induced surface modification for prevention of bacterial adhesion on 45S5 bioactive glass

Authors: Shazia Shaikh, Deepti Singh, Mahesh Subramanian, Sunita Kedia, Anil Kumar Singh, Kulwant Singh, Nidhi Gupta, Sucharita Sinha

Abstract: Bacterial attachment and biofilm formation on implant surface has been a major concern in hospital and industrial environment. Prevention of bacterial infections of implant surface through surface treatment could be a potential solution and hence this has become a key area of research. In the present study, the antibacterial and biocompatible properties of femtosecond laser surface treated 45S5 bi… ▽ More Bacterial attachment and biofilm formation on implant surface has been a major concern in hospital and industrial environment. Prevention of bacterial infections of implant surface through surface treatment could be a potential solution and hence this has become a key area of research. In the present study, the antibacterial and biocompatible properties of femtosecond laser surface treated 45S5 bioactive glass (BG) have been investigated. Adhesion and sustainability of both gram positive S. aureus and gram negative P.aeruginosa and E. coli nosocomial bacteria on untreated and laser treated BG samples has been explored. An imprint method has been used to visualize the growth of bacteria on the sample surface. We observed complete bacterial rejection potentially reducing risk of biofilm formation on laser treated surface. This was correlated with surface roughness, wettability and change in surface chemical composition of the samples before and after laser treatment. Biocompatibility of the laser treated BG was demonstrated by studying the anchoring and growth of human cervix cell line INT407. Our results demonstrate that, laser surface modification of BG enables enhanced bacterial rejection without affecting its biocompatibility towards growth of human cells on it. These results open a significantly potential approach towards use of laser in successfully imparting desirable characteristics to BG based bio-implants and devices. △ Less

Submitted 20 June, 2017; originally announced June 2017.

Stiffness of the human foot and evolution of the transverse arch

Authors: Madhusudhan Venkadesan, Marcelo A. Dias, Dhiraj K. Singh, Mahesh M. Bandi, Shreyas Mandre

Abstract: Foot stiffness underlies its mechanical function, and is central to the evolution of human bipedal locomotion. The stiff and propulsive human foot has two distinct arches, the longitudinal and transverse. By contrast, the feet of non-human primates are flat and softer. Current understanding of foot stiffness is based on studies that focus solely on the longitudinal arch, and little is known about… ▽ More Foot stiffness underlies its mechanical function, and is central to the evolution of human bipedal locomotion. The stiff and propulsive human foot has two distinct arches, the longitudinal and transverse. By contrast, the feet of non-human primates are flat and softer. Current understanding of foot stiffness is based on studies that focus solely on the longitudinal arch, and little is known about the mechanical function of the transverse arch. However, common experience suggests that transverse curvature dominates the stiffness; a droo** dollar bill stiffens significantly upon curling it along the transverse direction, not the longitudinal. We derive a normalized curvature parameter that encapsulates the geometric principle underlying the transverse curvature-induced stiffness. We show that the transverse arch accounts for almost all the difference in stiffness between human and monkey feet (vervet monkeys and pig-tailed macaques) by comparing transverse curvature-based predictions against published data on foot stiffness. Using this functional interpretation of the transverse arch, we trace the evolution of hominin feet and show that a human-like stiff foot likely predates Homo by $\sim 1.5$ million years, and appears in the $\sim 3.4$ million year old fossil from Burtele. A distinctly human-like transverse arch is also present in early members of Homo, including Homo naledi, Homo habilis, and Homo erectus. However, the $\sim 3.2$ million year old Australopithecus afarensis is estimated to have possessed a transitional foot, softer than humans and stiffer than other extant primates. A foot with human-like stiffness probably evolved around the same time as other lower limb adaptations for regular bipedality, and well before the emergence of Homo, the longitudinal arch, and other adaptations for endurance running. △ Less

Submitted 29 May, 2017; originally announced May 2017.

Comments: 22 pages, 7 figures, 4 tables

Journal ref: Nature 579, 97-100 (2020)

Hydrodynamic signatures of stationary Marangoni-driven surfactant transport

Authors: S. Mandre, V. S. Akella, D. K. Singh, R. S. Singh, M. M. Bandi

Abstract: We experimentally study steady Marangoni-driven surfactant transport on the interface of a deep water layer. Using hydrodynamic measurements, and without using any knowledge of the surfactant physico-chemical properties, we show that sodium dodecyl sulphate and Tergitol 15-S-9 introduced in low concentrations result in a flow driven by adsorbed surfactant. At higher surfactant concentration, the f… ▽ More We experimentally study steady Marangoni-driven surfactant transport on the interface of a deep water layer. Using hydrodynamic measurements, and without using any knowledge of the surfactant physico-chemical properties, we show that sodium dodecyl sulphate and Tergitol 15-S-9 introduced in low concentrations result in a flow driven by adsorbed surfactant. At higher surfactant concentration, the flow is dominated by the dissolved surfactant. Using Camphoric acid, whose properties are {\it a priori} unknown, we demonstrate this method's efficacy by showing its spreading is adsorption dominated. △ Less

Submitted 8 October, 2017; v1 submitted 8 May, 2017; originally announced May 2017.

Journal ref: Phys. Rev. Lett. 119, 264501 (2017)

Fractional Order Heat Equation in Higher Space-Time Dimensions

Authors: Dimple Singh, Bhupendra Nath Tiwari, Nunu Yadav

Abstract: In this paper, we study fractional order heat equation in higher space-time dimensions and offer specific role of heat flows in various fractional dimensions. We offer fractional solutions of the heat equations thus obtained, and examine the associated implications in various limiting cases. We anticipate perspective applications of fractional heat flow solutions in physical systems. In this paper, we study fractional order heat equation in higher space-time dimensions and offer specific role of heat flows in various fractional dimensions. We offer fractional solutions of the heat equations thus obtained, and examine the associated implications in various limiting cases. We anticipate perspective applications of fractional heat flow solutions in physical systems. △ Less

Submitted 10 April, 2017; originally announced April 2017.

Comments: 5 pages, Keywords: Fractional Calculus, Fractional Solutions, Fractional Heat Equation

Journal ref: Journal of Basic and Applied Engineering Research, p-ISSN: 2350-0077; e-ISSN: 2350-0255; Volume 3, Issue 8; April-June, 2016, pp. 724-727

Anti-Evaporation of Bardeen de-Sitter Black Holes

Authors: Dharm Veer Singh, Naveen K. Singh

Abstract: In this paper, we discuss the possibility of the anti-evaporation of degenerate Bardeen de-Sitter black hole. We solve the perturbation equations around the Nariai space-time. The solution of one of the perturbations related to the horizon size demonstrates that horizon of such black hole is constant. The other perturbation is also found to be stable. We further study thermodynamical properties of… ▽ More In this paper, we discuss the possibility of the anti-evaporation of degenerate Bardeen de-Sitter black hole. We solve the perturbation equations around the Nariai space-time. The solution of one of the perturbations related to the horizon size demonstrates that horizon of such black hole is constant. The other perturbation is also found to be stable. We further study thermodynamical properties of such black holes. We observe double phase transition at the Nariai limit. △ Less

Submitted 26 July, 2017; v1 submitted 29 March, 2017; originally announced April 2017.

Comments: Extensively revised

Journal ref: Annals of Physics, Vol 383 (2017) 600-609

Dynamics of a Camphoric Acid boat at the air-water interface

Authors: V. S. Akella, D. K. Singh, S. Mandre, M. M. Bandi

Abstract: We report experiments on an agarose gel tablet loaded with camphoric acid (c-boat) set into self-motion by interfacial tension gradients at the air-water interface. We observe three distinct modes of c-boat motion: harmonic mode where the c-boat speed oscillates sinusoidally in time, a steady mode where the c-boat maintains constant speed, and a relaxation oscillation mode where the c-boat maintai… ▽ More We report experiments on an agarose gel tablet loaded with camphoric acid (c-boat) set into self-motion by interfacial tension gradients at the air-water interface. We observe three distinct modes of c-boat motion: harmonic mode where the c-boat speed oscillates sinusoidally in time, a steady mode where the c-boat maintains constant speed, and a relaxation oscillation mode where the c-boat maintains near-zero speed between sudden jumps in speed and position at regular time intervals. Whereas all three modes have been separately reported before in different systems, we show they belong to a common description. Through control of the air-water surface tension with Sodium Dodecyl Sulfate (SDS), we experimentally deduce the three self-propulsive modes result from surface tension difference between Camphoric Acid (CA) and the ambient surroundings. △ Less

Submitted 24 January, 2017; originally announced January 2017.

Influence of pigment-protein coupling on excitation energy transfer in FMO complex

Authors: Davinder Singh, Shubhrangshu Dasgupta

Abstract: To explain experimentally observed oscillatory dynamics of highly efficient process of excitation energy transfer (EET) in Fenna-Matthews-Olson (FMO) complex, most theoretical models assume the same local protein environment around all the bacteriochlorophyll-a (BChla) sites, contradictory to the structural analysis of FMO complex. Using different values of pigment-protein couplings for different… ▽ More To explain experimentally observed oscillatory dynamics of highly efficient process of excitation energy transfer (EET) in Fenna-Matthews-Olson (FMO) complex, most theoretical models assume the same local protein environment around all the bacteriochlorophyll-a (BChla) sites, contradictory to the structural analysis of FMO complex. Using different values of pigment-protein couplings for different BChla sites, measured in the adiabatic limit of electron transfer, we theoretically investigate the effect of inhomogeneous local protein environment on excitation energy transfer. By employing non-Markovian master equation we demonstrate that the asymmetric system-bath coupling leads to the results consistent with the experimental observations. Quantum dynamical simulation suggests that the correlated fuctuations preserve the oscillation of excitation for long time-scales. Further different BChla sites have asymmetric time-scales of oscillations of excitation due to in-homogeneous pigment-protein couplings also. △ Less

Submitted 25 January, 2018; v1 submitted 29 April, 2016; originally announced May 2016.

Comments: More realistic protein environment is considered in article by authors, available on arXiv:1708.00920

Directional out-coupling of light from a plasmonic nanowire-nanoparticle junction

Authors: Danveer Singh, Arindam Dasgupta, Aswathy V. G., Ravi Tripathi, G. V. Pavan Kumar

Abstract: We experimentally show how a single Ag nanoparticle (NP) coupled to an Ag nanowire (NW) can convert propagating surface plasmon polaritons to directional photons. By employing dual-excitation Fourier microscopy with spatially filtered collection-optics, we show single- and dual-directional out-coupling of light from NW-NP junction for plasmons excited through glass-substrate and air-superstrate. F… ▽ More We experimentally show how a single Ag nanoparticle (NP) coupled to an Ag nanowire (NW) can convert propagating surface plasmon polaritons to directional photons. By employing dual-excitation Fourier microscopy with spatially filtered collection-optics, we show single- and dual-directional out-coupling of light from NW-NP junction for plasmons excited through glass-substrate and air-superstrate. Furthermore, we show NW-NP junction can influence the directionality of molecular-fluorescence emission, thus functioning as an optical antenna. The results discussed herein may have implications in realizing directional single-photon sources and quantum plasmon circuitry. △ Less

Submitted 9 April, 2015; originally announced April 2015.

Journal ref: Optics Letters, 40, 1006-1009 (2015)