-
Thermal Weibel instability induced magnetic fields co-exist with linear wakes in laser-ionized plasmas
Authors:
Yipeng Wu,
Audrey Farrell,
Mitchell Sinclair,
Chaojie Zhang,
Irina Petrushina,
Navid Vafaei-Najafabadi,
Marcus Babzien,
William Li,
Igor Pogorelsky,
Mikhail Polyanskiy,
Mikhail Fedurin,
Karl Kusche,
Mark Palmer,
Ken Marsh,
Chan Joshi
Abstract:
When a moderately intense, few-picoseconds long laser pulse ionizes gas to produce an underdense plasma column, a linear relativistic plasma wave or wake can be excited by the self-modulation instability that may prove useful for multi-bunch acceleration of externally injected electrons or positrons to high energies in a short distance. At the same time, due to the anisotropic temperature distribu…
▽ More
When a moderately intense, few-picoseconds long laser pulse ionizes gas to produce an underdense plasma column, a linear relativistic plasma wave or wake can be excited by the self-modulation instability that may prove useful for multi-bunch acceleration of externally injected electrons or positrons to high energies in a short distance. At the same time, due to the anisotropic temperature distributions of the ionized plasma electrons, the Weibel instability can self-generate magnetic fields throughout such a plasma on a few picosecond timescale. In the present paper we first show using simulations that both these effects do indeed co-exist in space and time in the plasma. Using our simulations, we make preliminary estimates of the transverse emittance growth of an externally injected beam due to the Weibel magnetic fields. We then present results of an experiment that has allowed us to measure the spatiotemporal evolution of the magnetic fields using an ultrashort relativistic electron probe beam. Both the topology and the lifetime of the Weibel instability induced magnetic fields are in reasonable agreement with the simulations.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
Efficient generation and amplification of intense vortex and vector laser pulses via strongly coupled stimulated Brillouin scattering in plasmas
Authors:
Yipeng Wu,
Chaojie Zhang,
Zan Nie,
Mitchell Sinclair,
Audrey Farrell,
Kenneth A Marsh,
E. Paulo Alves,
Frank Tsung,
Warren B. Mori,
Chan Joshi
Abstract:
The past decade has seen tremendous progress in the production and utilization of vortex and vector laser pulses. Although both are considered as structured light beams, the vortex lasers have helical phase fronts and phase singularities, while the vector lasers have spatially variable polarization states and polarization singularities. In contrast to the vortex pulses that carry orbital angular m…
▽ More
The past decade has seen tremendous progress in the production and utilization of vortex and vector laser pulses. Although both are considered as structured light beams, the vortex lasers have helical phase fronts and phase singularities, while the vector lasers have spatially variable polarization states and polarization singularities. In contrast to the vortex pulses that carry orbital angular momentum (OAM), the vector laser pulses have a complex spin angular momentum (SAM) and OAM coupling. Despite many potential applications enabled by such pulses, the generation of high-power/-intensity vortex and vector beams remains challenging. Here, we demonstrate using theory and three-dimensional simulations that the strongly-coupled stimulated Brillouin scattering (SC-SBS) process in plasmas can be used as a promising amplification technique with up to 65% energy transfer efficiency from the pump beam to the seed beam for both vortex and vector pulses. We also show that SC-SBS is strongly polarization-dependent in plasmas, enabling an all-optical polarization control of the amplified seed beam. Additionally, the interaction of such structured lasers with plasmas leads to various angular momentum couplings and decouplings that produce intense new light structures with controllable OAM and SAM. This scheme paves the way for novel optical devices such as plasma-based amplifiers and light field manipulators.
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
Near-field Imaging of Optical Resonances in Silicon Metasurfaces Using Photoelectron Microscopy
Authors:
Alex Boehm,
Sylvain D. Gennaro,
Chloe F. Doiron,
Thomas E. Beechem,
Michael B. Sinclair,
Igal Brener,
Raktim Sarma,
Taisuke Ohta
Abstract:
Precise control of light-matter interactions at the nanoscale lies at the heart of nanophotonics. Experimental examination at this length scale is challenging, however, since the corresponding electromagnetic near-field is often confined within volumes below the resolution of conventional optical microscopy. In semiconductor nanophotonics electromagnetic fields are further restricted within the co…
▽ More
Precise control of light-matter interactions at the nanoscale lies at the heart of nanophotonics. Experimental examination at this length scale is challenging, however, since the corresponding electromagnetic near-field is often confined within volumes below the resolution of conventional optical microscopy. In semiconductor nanophotonics electromagnetic fields are further restricted within the confines of individual subwavelength resonators, limiting access to critical light-matter interactions in these structures. In this work, we demonstrate that photoelectron emission microscopy (PEEM) can be used for polarization resolved near-field spectroscopy and imaging of electromagnetic resonances supported by broken-symmetry silicon metasurfaces. We find that the photoemission results, enabled through an in-situ potassium surface layer, are consistent with full-wave simulations and far-field reflectance measurements across visible and near-infrared wavelengths. In addition, we uncover a polarization dependent evolution of collective resonances near the metasurface array edge taking advantage of the far-field excitation and full-field imaging of PEEM. Here, we deduce that coupling between eight resonators or more establishes the collective excitations of this metasurface. All told, we demonstrate that the high-spatial resolution hyperspectral imaging and far-field illumination of PEEM can be leveraged for the metrology of collective, non-local, optical resonances in semiconductor nanophotonic structures.
△ Less
Submitted 12 June, 2024; v1 submitted 24 February, 2023;
originally announced February 2023.
-
Sub picosecond steering of ultrafast incoherent emission from semiconductor metasurfaces
Authors:
Prasad P. Iyer,
Nicholas Karl,
Sadhvikas Addamane,
Sylvain D. Gennaro,
Michael B. Sinclair,
Igal Brener
Abstract:
The ability to dynamically steer fs pulses from a monolithically integrated source is a critical milestone for the fields of nanophotonics and ultrafast optics. The nascent field of reconfigurable metasurfaces -- made of optically resonant meta-atoms -- has shown great promise in manipulating light-matter interactions through subwavelength control of the phase, amplitude, and polarization of light…
▽ More
The ability to dynamically steer fs pulses from a monolithically integrated source is a critical milestone for the fields of nanophotonics and ultrafast optics. The nascent field of reconfigurable metasurfaces -- made of optically resonant meta-atoms -- has shown great promise in manipulating light-matter interactions through subwavelength control of the phase, amplitude, and polarization of light. These active metasurfaces arbitrarily transform an incident wavefront using a reconfigurable spatial phase profile and thus have been limited to manipulating coherent external sources. Light emitting metasurfaces obtained through integration of incoherent emitters with meta-atoms, have been used to statically increase the quantum efficiency of the emission through Purcell factor enhancement and control the far-field emission properties of the light to collimate and focus spontaneous emission. Active manipulation of such incoherent light sources, however, remains a challenge as current phase-sensitive approaches used for coherent sources cannot be directly applied. Spatiotemporal control at ultrafast timescales of incoherent light emission could lead to a transformative technological leap allowing low-power light emitting diodes (LEDs) to replace high-power coherent laser sources, enabling holographic LED displays and other key optical transceiver applications including remote-sensing, perception, and high-speed optical communication systems. In this work, we theoretically predict and experimentally demonstrate for the first time, sub-picosecond steering over a 70° range of ultrafast incoherent emission from a light emitting metasurface.
△ Less
Submitted 9 June, 2022;
originally announced June 2022.
-
Efficient Generation of Tunable Magnetic and Optical Vortices Using Plasmas
Authors:
Yipeng Wu,
Xinlu Xu,
Chaojie Zhang,
Zan Nie,
Mitchell Sinclair,
Audrey Farrell,
Ken A Marsh,
Jianfei Hua,
Wei Lu,
Warren B. Mori,
Chan Joshi
Abstract:
Plasma is an attractive medium for generating strong microscopic magnetic structures and tunable electromagnetic radiation with predictable topologies due to its extraordinary ability to sustain and manipulate high currents and strong fields. Here, using theory and simulations, we show efficient generation of multi-megagauss magnetic and tunable optical vortices when a sharp relativistic ionizatio…
▽ More
Plasma is an attractive medium for generating strong microscopic magnetic structures and tunable electromagnetic radiation with predictable topologies due to its extraordinary ability to sustain and manipulate high currents and strong fields. Here, using theory and simulations, we show efficient generation of multi-megagauss magnetic and tunable optical vortices when a sharp relativistic ionization front (IF) passes through a relatively long-wavelength Laguerre-Gaussian (LG) laser pulse with orbital angular momentum (OAM). The optical vortex is frequency upshifted within a wide spectral range simply by changing the plasma density and compressed in duration. The topological charges of both vortices can be manipulated by controlling the OAM mode of the incident LG laser and/or by controlling the topology and density of the IF. For relatively high (low) plasma densities, most energy of the incident LG laser pulse is converted to the magnetic (optical) vortex.
△ Less
Submitted 19 April, 2022;
originally announced April 2022.
-
Map** the self-generated magnetic fields due to thermal Weibel instability
Authors:
Chaojie Zhang,
Yipeng Wu,
Mitchell Sinclair,
Audrey Farrell,
Kenneth A. Marsh,
Irina Petrushina,
Navid Vafaei-Najafabadi,
Apurva Gawked,
Rotem Kupfer,
Karl Kusche,
Mikhail Fedurin,
Igor Pogorelsky,
Mikhail Polyanskiy,
Chen-Kang Huang,
Jianfei Hua,
Wei Lu,
Warren B. Mori,
Chan Joshi
Abstract:
Weibel-type instability can self-generate and amplify magnetic fields in both space and laboratory plasmas with temperature anisotropy. The electron Weibel instability has generally proven more challenging to measure than its ion counterpart owing to the much smaller inertia of electrons, resulting in a faster growth rate and smaller characteristic wavelength. Here, we have probed the evolution of…
▽ More
Weibel-type instability can self-generate and amplify magnetic fields in both space and laboratory plasmas with temperature anisotropy. The electron Weibel instability has generally proven more challenging to measure than its ion counterpart owing to the much smaller inertia of electrons, resulting in a faster growth rate and smaller characteristic wavelength. Here, we have probed the evolution of the two-dimensional distribution of the magnetic field components and the current density due to electron Weibel instability, in $\rm CO_2$-ionized hydrogen gas (plasma) with picosecond resolution using a relativistic electron beam. We find that the wavenumber spectra of the magnetic fields are initially broad but eventually shrink to a narrow spectrum representing the dominant quasi-single mode. The measured $k$-resolved growth rates of the instability validate kinetic theory. Concurrently, self-organization of microscopic plasma currents is observed to amplify the current modulation magnitude that converts up to $\sim 1\%$ of the plasma thermal energy into magnetic energy.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Electron Weibel instability induced magnetic fields in optical-field ionized plasmas
Authors:
Chaojie Zhang,
Yipeng Wu,
Mitchell Sinclair,
Audrey Farrell,
Kenneth A. Marsh,
Jianfei Hua,
Irina Petrushina,
Navid Vafaei-Najafabadi,
Rotem Kupfer,
Karl Kusche,
Mikhail Fedurin,
Igor Pogorelsky,
Mikhail Polyanskiy,
Chen-Kang Huang,
Wei Lu,
Warren B. Mori,
Chan Joshi
Abstract:
Generation and amplification of magnetic fields in plasmas is a long-standing topic that is of great interest to both plasma and space physics. The electron Weibel instability is a well-known mechanism responsible for self-generating magnetic fields in plasmas with temperature anisotropy and has been extensively investigated in both theory and simulations, yet experimental verification of this ins…
▽ More
Generation and amplification of magnetic fields in plasmas is a long-standing topic that is of great interest to both plasma and space physics. The electron Weibel instability is a well-known mechanism responsible for self-generating magnetic fields in plasmas with temperature anisotropy and has been extensively investigated in both theory and simulations, yet experimental verification of this instability has been challenging. Recently, we demonstrated a new experimental platform that enables the controlled initialization of highly nonthermal and/or anisotropic plasma electron velocity distributions via optical-field ionization. Using an external electron probe bunch from a linear accelerator, the onset, saturation and decay of the self-generated magnetic fields due to electron Weibel instability were measured for the first time to our knowledge. In this paper, we will first present experimental results on time-resolved measurements of the Weibel magnetic fields in non-relativistic plasmas produced by Ti:Sapphire laser pulses (0.8 $μm$) and then discuss the feasibility of extending the study to quasi-relativistic regime by using intense $\rm CO_2$ (e.g., 9.2 $μm$) lasers to produce much hotter plasmas.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Cascaded optical nonlinearities in dielectric metasurfaces
Authors:
Sylvain D. Gennaro,
Chloe F. Doiron,
Nicholas Karl,
Prasad P. Iyer,
Michael B. Sinclair,
Igal Brener
Abstract:
Since the discovery of the laser, optical parametric nonlinearities have been at the core of efficient light conversion sources. Typically, thick transparent crystals or quasi-phase matched waveguides, are utilized in conjunction with phase-matching techniques to select a single parametric process. In recent years, due to the rapid developments in artificially structured materials, optical frequen…
▽ More
Since the discovery of the laser, optical parametric nonlinearities have been at the core of efficient light conversion sources. Typically, thick transparent crystals or quasi-phase matched waveguides, are utilized in conjunction with phase-matching techniques to select a single parametric process. In recent years, due to the rapid developments in artificially structured materials, optical frequency mixing has been achieved at the nanoscale in subwavelength resonators arrayed as metasurfaces. Phase matching becomes relaxed for these wavelength-scale structures, and all allowed nonlinear processes can, in principle, occur on an equal footing. This could promote harmonic generation via a cascaded (consisting of several frequency mixing steps) process. However, so far, all reported work on dielectric metasurfaces have assumed frequency mixing from a direct (single step) nonlinear process. In this work, we prove the existence of cascaded second-order optical nonlinearities by analyzing the second and third wave mixing from a highly nonlinear metasurface in conjunction with polarization selection rules and crystal symmetries. We find that the third wave mixing signal from a cascaded process can be of comparable strength to that from conventional third harmonic generation, and that surface nonlinearities are the dominant mechanism that contributes to cascaded second order nonlinearities
△ Less
Submitted 9 December, 2021; v1 submitted 3 December, 2021;
originally announced December 2021.
-
Ionization induced plasma grating and its applications in strong-field ionization measurements
Authors:
Chaojie Zhang,
Zan Nie,
Yipeng Wu,
Mitchell Sinclair,
Chen-Kang Huang,
Ken A. Marsh,
Chan Joshi
Abstract:
An ionization-induced plasma grating can be formed by spatially selective ionization of gases by the interference of two intersecting ultra-short laser pulses. The density modulation of a plasma grating can approach unity since the plasma is produced only where the two pulses constructively interfere and ionization does not occur in destructive interference regions. Such a large density modulation…
▽ More
An ionization-induced plasma grating can be formed by spatially selective ionization of gases by the interference of two intersecting ultra-short laser pulses. The density modulation of a plasma grating can approach unity since the plasma is produced only where the two pulses constructively interfere and ionization does not occur in destructive interference regions. Such a large density modulation leads to efficient Thomson scattering of a second ultra-short probe pulse once the Bragg condition is satisfied. By measuring the scattering efficiency, it is possible to determine the absolute electron density in the plasma grating and thereby deduce the ionization degree for a given neutral gas density. In this paper, we demonstrate the usefulness of this concept by showing two applications: ionization degree measurement of strong-field ionization of atoms and molecules and characterization of extremely low-density gas jets. The former application is of particular interest for ionization physics studies in dense gases where the collision of the ionized electron with neighboring neutrals may become important-sometimes referred to as many-body ionization, and the latter is useful for plasma-based acceleration that requires extremely low-density plasmas.
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
Automated quantification of myocardial tissue characteristics from native T1 map** using neural networks with Bayesian inference for uncertainty-based quality-control
Authors:
Esther Puyol Anton,
Bram Ruijsink,
Christian F. Baumgartner,
Matthew Sinclair,
Ender Konukoglu,
Reza Razavi,
Andrew P. King
Abstract:
Tissue characterisation with CMR parametric map** has the potential to detect and quantify both focal and diffuse alterations in myocardial structure not assessable by late gadolinium enhancement. Native T1 map** in particular has shown promise as a useful biomarker to support diagnostic, therapeutic and prognostic decision-making in ischaemic and non-ischaemic cardiomyopathies. Convolutional…
▽ More
Tissue characterisation with CMR parametric map** has the potential to detect and quantify both focal and diffuse alterations in myocardial structure not assessable by late gadolinium enhancement. Native T1 map** in particular has shown promise as a useful biomarker to support diagnostic, therapeutic and prognostic decision-making in ischaemic and non-ischaemic cardiomyopathies. Convolutional neural networks with Bayesian inference are a category of artificial neural networks which model the uncertainty of the network output. This study presents an automated framework for tissue characterisation from native ShMOLLI T1 map** at 1.5T using a Probabilistic Hierarchical Segmentation (PHiSeg) network. In addition, we use the uncertainty information provided by the PHiSeg network in a novel automated quality control (QC) step to identify uncertain T1 values. The PHiSeg network and QC were validated against manual analysis on a cohort of the UK Biobank containing healthy subjects and chronic cardiomyopathy patients. We used the proposed method to obtain reference T1 ranges for the left ventricular myocardium in healthy subjects as well as common clinical cardiac conditions. T1 values computed from automatic and manual segmentations were highly correlated (r=0.97). Bland-Altman analysis showed good agreement between the automated and manual measurements. The average Dice metric was 0.84 for the left ventricular myocardium. The sensitivity of detection of erroneous outputs was 91%. Finally, T1 values were automatically derived from 14,683 CMR exams from the UK Biobank. The proposed pipeline allows for automatic analysis of myocardial native T1 map** and includes a QC process to detect potentially erroneous results. T1 reference values were presented for healthy subjects and common clinical cardiac conditions from the largest cohort to date using T1-map** images.
△ Less
Submitted 31 January, 2020;
originally announced January 2020.
-
High-harmonic generation from an epsilon-near-zero material
Authors:
Yuanmu Yang,
Jian Lu,
Alejandro Manjavacas,
Ting S. Luk,
Hanzhe Liu,
Kyle Kelley,
Jon-Paul Maria,
Michael B. Sinclair,
Shambhu Ghimire,
Igal Brener
Abstract:
High-harmonic generation (HHG) from a compact, solid-state medium is highly desirable for applications such as coherent attosecond pulse generation and extreme ultra-violet (EUV) spectroscopy, yet the typically weak conversion of pump light to HHG can largely hinder its applications. Here, we use a material operating in its epsilon-near-zero (ENZ) region, where the real part of its permittivity va…
▽ More
High-harmonic generation (HHG) from a compact, solid-state medium is highly desirable for applications such as coherent attosecond pulse generation and extreme ultra-violet (EUV) spectroscopy, yet the typically weak conversion of pump light to HHG can largely hinder its applications. Here, we use a material operating in its epsilon-near-zero (ENZ) region, where the real part of its permittivity vanishes, to greatly boost the efficiency of the HHG process at the microscopic level. In experiments, we report high-harmonic emission up to the 9th order directly from a low-loss, solid-state ENZ medium: indium-doped cadmium oxide, with an excitation intensity at the GW cm-2 level. Furthermore, the observed HHG signal exhibits a pronounced spectral red-shift as well as linewidth broadening, resulting from the photo-induced electron heating and the consequent time-dependent resonant frequency of the ENZ film. Our results provide a novel nanophotonic platform for strong field physics, reveal new degrees of freedom for spectral and temporal control of HHG, and open up possibilities of compact solid-state attosecond light sources.
△ Less
Submitted 10 February, 2019;
originally announced February 2019.
-
An optical metamixer
Authors:
Sheng Liu,
Polina P. Vabishchevich,
Aleksandr Vaskin,
John L. Reno,
Gordon A. Keeler,
Michael B. Sinclair,
Isabelle Staude,
Igal Brener
Abstract:
A frequency mixer is a nonlinear device that combines electromagnetic waves to create waves at new frequencies. Mixers are ubiquitous components in modern radio-frequency technology and are widely used in microwave signal processing. The development of versatile frequency mixers for optical frequencies remains challenging: such devices generally rely on weak nonlinear optical processes and, thus,…
▽ More
A frequency mixer is a nonlinear device that combines electromagnetic waves to create waves at new frequencies. Mixers are ubiquitous components in modern radio-frequency technology and are widely used in microwave signal processing. The development of versatile frequency mixers for optical frequencies remains challenging: such devices generally rely on weak nonlinear optical processes and, thus, must satisfy phase matching conditions. In this work, we utilize a GaAs-based dielectric metasurface to demonstrate an optical frequency mixer that concurrently generates eleven new frequencies spanning the ultraviolet to near-infrared (NIR) spectral range. Our approach combines strong intrinsic material nonlinearities, enhanced electromagnetic fields, and relaxed phase-matching requirements, to allow seven different nonlinear optical processes to occur simultaneously. Specifically, when pumped by two femtosecond NIR pulses, we observe second-, third- and fourth-harmonic generation, sum-frequency generation, two-photon absorption induced photoluminescence, four-wave mixing, and six-wave mixing. Such ultracompact optical mixers may enable a plethora of applications in biology, chemistry, sensing, communications and quantum optics.
△ Less
Submitted 31 October, 2017;
originally announced November 2017.
-
Demonstration of a switchable dam** system to allow low-noise operation of high-Q low-mass suspension systems
Authors:
Jan-Simon Hennig,
Bryan W. Barr,
Angus S. Bell,
William Cunningham,
Stefan L. Danilishin,
Peter Dupej,
Christian Graef,
Sabina H. Huttner,
Russell Jones,
Sean S. Leavey,
Daniela Pascucci,
Martin Sinclair,
Borja Sorazu,
Andrew Spencer,
Sebastian Steinlechner,
Kenneth A. Strain,
Jennifer Wright,
Teng Zhang,
Stefan Hild
Abstract:
Low mass suspension systems with high-Q pendulum stages are used to enable quantum radiation pressure noise limited experiments. Utilising multiple pendulum stages with vertical blade springs and materials with high quality factors provides attenuation of seismic and thermal noise, however dam** of these high-Q pendulum systems in multiple degrees of freedom is essential for practical implementa…
▽ More
Low mass suspension systems with high-Q pendulum stages are used to enable quantum radiation pressure noise limited experiments. Utilising multiple pendulum stages with vertical blade springs and materials with high quality factors provides attenuation of seismic and thermal noise, however dam** of these high-Q pendulum systems in multiple degrees of freedom is essential for practical implementation. Viscous dam** such as eddy-current dam** can be employed but introduces displacement noise from force noise due to thermal fluctuations in the dam** system. In this paper we demonstrate a passive dam** system with adjustable dam** strength as a solution for this problem that can be used for low mass suspension systems without adding additional displacement noise in science mode. We show a reduction of the dam** factor by a factor of 8 on a test suspension and provide a general optimisation for this system.
△ Less
Submitted 25 October, 2017; v1 submitted 24 October, 2017;
originally announced October 2017.
-
Active tuning of high-Q dielectric metasurfaces
Authors:
Matthew Parry,
Andrei Komar,
Ben Hopkins,
Salvatore Campione,
Sheng Liu,
Andrey E. Miroshnichenko,
John Nogan,
Michael B. Sinclair,
Igal Brener,
Dragomir N. Neshev
Abstract:
We demonstrate the active tuning of all-dielectric metasurfaces exhibiting high-quality factor (high-Q) resonances. The active control is provided by embedding the asymmetric silicon meta-atoms with liquid crystals, which allows the relative index of refraction to be controlled through heating. It is found that high quality factor resonances ($Q=270\pm30$) can be tuned over more than three resonan…
▽ More
We demonstrate the active tuning of all-dielectric metasurfaces exhibiting high-quality factor (high-Q) resonances. The active control is provided by embedding the asymmetric silicon meta-atoms with liquid crystals, which allows the relative index of refraction to be controlled through heating. It is found that high quality factor resonances ($Q=270\pm30$) can be tuned over more than three resonance widths. Our results demonstrate the feasibility of using all-dielectric metasurfaces to construct tunable narrow-band filters.
△ Less
Submitted 17 May, 2017;
originally announced May 2017.
-
Resonantly enhanced second-harmonic generation using III-V semiconductor all-dielectric metasurfaces
Authors:
Sheng Liu,
Michael B. Sinclair,
Sina Saravi,
Gordon A. Keeler,
Yuanmu Yang,
John Reno,
Gregory M. Peake,
Frank Setzpfandt,
Isabelle Staude,
Thomas Pertsch,
Igal Brener
Abstract:
Nonlinear optical phenomena in nanostructured materials have been challenging our perceptions of nonlinear optical processes that have been explored since the invention of lasers. For example, the ability to control optical field confinement, enhancement, and scattering almost independently, allows nonlinear frequency conversion efficiencies to be enhanced by many orders of magnitude compared to b…
▽ More
Nonlinear optical phenomena in nanostructured materials have been challenging our perceptions of nonlinear optical processes that have been explored since the invention of lasers. For example, the ability to control optical field confinement, enhancement, and scattering almost independently, allows nonlinear frequency conversion efficiencies to be enhanced by many orders of magnitude compared to bulk materials. Also, the subwavelength length scale renders phase matching issues irrelevant. Compared with plasmonic nanostructures, dielectric resonator metamaterials show great promise for enhanced nonlinear optical processes due to their larger mode volumes. Here, we present, for the first time, resonantly enhanced second-harmonic generation (SHG) using Gallium Arsenide (GaAs) based dielectric metasurfaces. Using arrays of cylindrical resonators we observe SHG enhancement factors as large as 104 relative to unpatterned GaAs. At the magnetic dipole resonance we measure an absolute nonlinear conversion efficiency of ~2X10^(-5) with ~3.4 GW/cm2 pump intensity. The polarization properties of the SHG reveal that both bulk and surface nonlinearities play important roles in the observed nonlinear process.
△ Less
Submitted 15 August, 2016; v1 submitted 8 August, 2016;
originally announced August 2016.
-
Broken symmetry dielectric resonators for high quality-factor Fano metasurfaces
Authors:
Salvatore Campione,
Sheng Liu,
Lorena I. Basilio,
Larry K. Warne,
William L. Langston,
Ting S. Luk,
Joel R. Wendt,
John L. Reno,
Gordon A. Keeler,
Igal Brener,
Michael B. Sinclair
Abstract:
We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality-factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geoemetries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple "bright" dipole…
▽ More
We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality-factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geoemetries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple "bright" dipole modes to "dark" dipole modes whose radiative decay is suppressed by local field effects in the array. Our approach is widely scalable from the near-infrared to radio frequencies. We first unravel the Fano resonance behavior through numerical simulations of a germanium resonator-based metasurface that achieved a quality-factor of ~1300 at ~10.8 um. Then, we present two experimental demonstrations operating in the near-infrared (~1 um): a silicon-based implementation that achieved a quality-factor of ~350; and a gallium arsenide-based structure that achieves a quality-factor of ~600 - the highest near-infrared quality-factor experimentally demonstrated to date with this kind of metasurfaces. Importantly, large electromagnetic field enhancements appear within the resonators at the Fano resonant frequencies. We envision that combining high-quality factor, high field enhancement resonances with nonlinear and active/gain materials such as gallium arsenide will lead to new classes of active optical devices.
△ Less
Submitted 21 July, 2016;
originally announced July 2016.
-
III-V semiconductor nano-resonators-a new strategy for passive, active, and nonlinear all-dielectric metamaterials
Authors:
Sheng Liu,
Gordon A. Keeler,
John L. Reno,
Michael B. Sinclair,
Igal Brener
Abstract:
Metamaterials comprising assemblies of dielectric resonators have attracted much attention due to their low intrinsic loss and isotropic optical response. In particular, metasurfaces made from silicon dielectric resonators have shown desirable behaviors such as efficient nonlinear optical conversion, spectral filtering and advanced wave-front engineering. To further explore the potential of dielec…
▽ More
Metamaterials comprising assemblies of dielectric resonators have attracted much attention due to their low intrinsic loss and isotropic optical response. In particular, metasurfaces made from silicon dielectric resonators have shown desirable behaviors such as efficient nonlinear optical conversion, spectral filtering and advanced wave-front engineering. To further explore the potential of dielectric metamaterials, we present all-dielectric metamaterials fabricated from epitaxially grown III-V semiconductors that can exploit the high second-order optical susceptibilities of III-V semiconductors, as well as the ease of monolithically integrating active/gain media. Specifically, we create GaAs nano-resonators using a selective wet oxidation process that forms a low refractive index AlGaO (n~1.6) under layer similar to silicon dielectric resonators formed using silicon-on-insulator wafers. We further use the same fabrication processes to demonstrate multilayer III-V dielectric resonator arrays that provide us with new degrees of freedom in device engineering. For these arrays, we experimentally measure ~100% reflectivity over a broad spectral range. We envision that all-dielectric III-V semiconductor metamaterials will open up new avenues for passive, active and nonlinear all dielectric metamaterials
△ Less
Submitted 1 May, 2016;
originally announced May 2016.
-
Realizing high-quality, ultra-large momentum states using semiconductor hyperbolic metamaterials
Authors:
Salvatore Campione,
Sheng Liu,
Ting S. Luk,
Michael B. Sinclair
Abstract:
We employ both the effective medium approximation (EMA) and Bloch theory to compare the dispersion properties of semiconductor hyperbolic metamaterials (SHMs) at mid-infrared frequencies and metallic hyperbolic metamaterials (MHMs) at visible frequencies. This analysis reveals the conditions under which the EMA can be safely applied for both MHMs and SHMs. We find that the combination of precise n…
▽ More
We employ both the effective medium approximation (EMA) and Bloch theory to compare the dispersion properties of semiconductor hyperbolic metamaterials (SHMs) at mid-infrared frequencies and metallic hyperbolic metamaterials (MHMs) at visible frequencies. This analysis reveals the conditions under which the EMA can be safely applied for both MHMs and SHMs. We find that the combination of precise nanoscale layering and the longer infrared operating wavelengths puts the SHMs well within the effective medium limit and, in contrast to MHMs, allows the attainment of very high photon momentum states. In addition, SHMs allow for new phenomena such as ultrafast creation of the hyperbolic manifold through optical pum**. In particular, we examine the possibility of achieving ultrafast topological transitions through optical pum** which can photo-dope appropriately designed quantum wells on the femtosecond time scale.
△ Less
Submitted 20 March, 2015;
originally announced March 2015.
-
Enhanced third harmonic generation from the epsilon-near-zero modes of ultrathin films
Authors:
Ting S. Luk,
Domenico de Ceglia,
Sheng Liu,
Gordon A. Keeler,
Rohit P. Prasankumar,
Maria A. Vincenti,
Michael Scalora,
Michael B. Sinclair,
Salvatore Campione
Abstract:
We experimentally demonstrate efficient third harmonic generation from an indium tin oxide (ITO) nanofilm (lambda/42 thick) on a glass substrate for a pump wavelength of 1.4 um. A conversion efficiency of 3.3x10^-6 is achieved by exploiting the field enhancement properties of the epsilon-near-zero (ENZ) mode with an enhancement factor of 200. This nanoscale frequency conversion method is applicabl…
▽ More
We experimentally demonstrate efficient third harmonic generation from an indium tin oxide (ITO) nanofilm (lambda/42 thick) on a glass substrate for a pump wavelength of 1.4 um. A conversion efficiency of 3.3x10^-6 is achieved by exploiting the field enhancement properties of the epsilon-near-zero (ENZ) mode with an enhancement factor of 200. This nanoscale frequency conversion method is applicable to other plasmonic materials and reststrahlen materials in proximity of the longitudinal optical phonon frequencies.
△ Less
Submitted 13 February, 2015;
originally announced February 2015.
-
Tailoring dielectric resonator geometries for directional scattering and Huygens' metasurfaces
Authors:
Salvatore Campione,
Lorena I. Basilio,
Larry K. Warne,
Michael B. Sinclair
Abstract:
In this paper we describe a methodology for tailoring the design of metamaterial dielectric resonators, which represent a promising path toward low-loss metamaterials at optical frequencies. We first describe a procedure to decompose the far field scattered by subwavelength resonators in terms of multipolar field components, providing explicit expressions for the multipolar far fields. We apply th…
▽ More
In this paper we describe a methodology for tailoring the design of metamaterial dielectric resonators, which represent a promising path toward low-loss metamaterials at optical frequencies. We first describe a procedure to decompose the far field scattered by subwavelength resonators in terms of multipolar field components, providing explicit expressions for the multipolar far fields. We apply this formulation to confirm that an isolated high-permittivity cube resonator possesses frequency separated electric and magnetic dipole resonances, as well as a magnetic quadrupole resonance in close proximity to the electric dipole resonance. We then introduce multiple dielectric gaps to the resonator geometry in a manner suggested by perturbation theory, and demonstrate the ability to overlap the electric and magnetic dipole resonances, thereby enabling directional scattering by satisfying the first Kerker condition. We further demonstrate the ability to push the quadrupole resonance away from the degenerate dipole resonances to achieve local behavior. These properties are confirmed through the multipolar expansion and show that the use of geometries suggested by perturbation theory is a viable route to achieve purely dipole resonances for metamaterial applications such as wave-front manipulation with Huygens' metasurfaces. Our results are fully scalable across any frequency bands where high-permittivity dielectric materials are available, including microwave, THz, and infrared frequencies.
△ Less
Submitted 16 December, 2014; v1 submitted 8 October, 2014;
originally announced October 2014.
-
Directional perfect absorption using deep subwavelength low permittivity films
Authors:
Ting S. Luk,
Salvatore Campione,
Iltai Kim,
Simin Feng,
Young Chul Jun,
Sheng Liu,
Jeremy B. Wright,
Igal Brener,
Peter B. Catrysse,
Shanhui Fan,
Michael B. Sinclair
Abstract:
We experimentally demonstrate single beam directional perfect absorption (to within experimental accuracy) of p-polarized light in the near-infrared using unpatterned, deep subwavelength films of indium tin oxide (ITO) on Ag. The experimental perfect absorption occurs slightly above the epsilon-near-zero (ENZ) frequency of ITO where the permittivity is less than one. Remarkably, we obtain perfect…
▽ More
We experimentally demonstrate single beam directional perfect absorption (to within experimental accuracy) of p-polarized light in the near-infrared using unpatterned, deep subwavelength films of indium tin oxide (ITO) on Ag. The experimental perfect absorption occurs slightly above the epsilon-near-zero (ENZ) frequency of ITO where the permittivity is less than one. Remarkably, we obtain perfect absorption for films whose thickness is as low as ~1/50th of the operating free-space wavelength and whose single pass attenuation is only ~ 5%. We further derive simple analytical conditions for perfect absorption in the subwavelength-film regime that reveal the constraints that the ITO permittivity must satisfy if perfect absorption is to be achieved. Then, to get a physical insight on the perfect absorption properties, we analyze the eigenmodes of the layered structure by computing both the real-frequency/complex-wavenumber and the complex-frequency/real-wavenumber modal dispersion diagrams. These analyses allow us to attribute the experimental perfect absorption behavior to the crossover between bound and leaky behavior of one eigenmode of the layered structure. Both modal methods show that perfect absorption occurs at a frequency slightly larger than the ENZ frequency, in agreement with experimental results, and both methods predict a second perfect absorption condition at higher frequencies attributed to another crossover between bound and leaky behavior of the same eigenmode. Our results greatly expand the list of materials that can be considered for use as ultrathin perfect absorbers and also provide a methodology for the design of absorber systems at any desired frequency.
△ Less
Submitted 24 July, 2014; v1 submitted 21 May, 2014;
originally announced May 2014.
-
Electrodynamic modeling of strong coupling between a metasurface and intersubband transitions in quantum wells
Authors:
Salvatore Campione,
Alexander Benz,
John F. Klem,
Michael B. Sinclair,
Igal Brener,
Filippo Capolino
Abstract:
Strong light-matter coupling has recently been demonstrated in sub-wavelength volumes by coupling engineered optical transitions in semiconductor heterostructures (e.g., quantum wells) to metasurface resonances via near fields. It has also been shown that different resonator shapes may lead to different Rabi splittings, though this has not yet been well explained. In this paper, our aim is to unde…
▽ More
Strong light-matter coupling has recently been demonstrated in sub-wavelength volumes by coupling engineered optical transitions in semiconductor heterostructures (e.g., quantum wells) to metasurface resonances via near fields. It has also been shown that different resonator shapes may lead to different Rabi splittings, though this has not yet been well explained. In this paper, our aim is to understand the correlation between resonator shape and Rabi splitting, and in particular determine and quantify the physical parameters that affect strong coupling by develo** an equivalent circuit network model whose elements describe energy and dissipation. Because of the subwavelength dimension of each metasurface element, we resort to the quasi-static (electrostatic) description of the near-field and hence define an equivalent capacitance associated to each dipolar element of a flat metasurface, and we show that this is also able to accurately model the phenomenology involved in strong coupling between the metasurface and the intersubband transitions in quantum wells. We show that the spectral properties and stored energy of a metasurface/quantum-well system obtained using our model are in good agreement with both full-wave simulation and experimental results. We then analyze metasurfaces made of three different resonator geometries and observe that the magnitude of the Rabi splitting increases with the resonator capacitance in agreement with our theory, providing a phenomenological explanation for the resonator shape dependence of the strong coupling process.
△ Less
Submitted 17 March, 2014;
originally announced March 2014.
-
Optical Magnetic Mirrors without Metals
Authors:
Sheng Liu,
Michael B. Sinclair,
Thomas S. Mahony,
Young Chul Jun,
Salvatore Campione,
James Ginn,
Daniel A. Bender,
Joel R. Wendt,
Jon F. Ihlefeld,
Paul G. Clem,
Jeremy B. Wright,
Igal Brener
Abstract:
The reflection of an optical wave from a metal, arising from strong interactions between the optical electric field and the free carriers of the metal, is accompanied by a phase reversal of the reflected electric field. A far less common route to achieve high reflectivity exploits strong interactions between the material and the optical magnetic field to produce a magnetic mirror which does not re…
▽ More
The reflection of an optical wave from a metal, arising from strong interactions between the optical electric field and the free carriers of the metal, is accompanied by a phase reversal of the reflected electric field. A far less common route to achieve high reflectivity exploits strong interactions between the material and the optical magnetic field to produce a magnetic mirror which does not reverse the phase of the reflected electric field. At optical frequencies, the magnetic properties required for strong interaction can only be achieved through the use of artificially tailored materials. Here we experimentally demonstrate, for the first time, the magnetic mirror behavior of a low-loss, all-dielectric metasurface at infrared optical frequencies through direct measurements of the phase and amplitude of the reflected optical wave. The enhanced absorption and emission of transverse electric dipoles placed very close to magnetic mirrors can lead to exciting new advances in sensors, photodetectors, and light sources.
△ Less
Submitted 5 March, 2014;
originally announced March 2014.
-
Infrared Dielectric Resonator Metamaterial
Authors:
James C. Ginn,
Igal Brener,
David W. Peters,
Joel R. Wendt,
Jeffrey O. Stevens,
Paul F. Hines,
Lorena I. Basilio,
Larry K. Warne,
Jon F. Ihlefeld,
Paul G. Clem,
Michael B. Sinclair
Abstract:
We demonstrate, for the first time, an all-dielectric metamaterial resonator in the mid-wave infrared based on high-index tellurium cubic inclusions. Dielectric resonators are desirable compared to conventional metallo-dielectric metamaterials at optical frequencies as they are largely angular invariant, free of ohmic loss, and easily integrated into three-dimensional volumes. With these low-loss,…
▽ More
We demonstrate, for the first time, an all-dielectric metamaterial resonator in the mid-wave infrared based on high-index tellurium cubic inclusions. Dielectric resonators are desirable compared to conventional metallo-dielectric metamaterials at optical frequencies as they are largely angular invariant, free of ohmic loss, and easily integrated into three-dimensional volumes. With these low-loss, isotropic elements, disruptive optical metamaterial designs, such as wide-angle lenses and cloaks, can be more easily realized.
△ Less
Submitted 24 August, 2011;
originally announced August 2011.
-
Interaction between Metamaterial Resonators and Inter-subband transitions in Semiconductor Quantum Wells
Authors:
Alon Gabbay,
John Reno,
Joel R. Wendt,
Aaron Gin,
Michael C. Wanke,
Michael B. Sinclair,
Eric Shaner,
Igal Brener
Abstract:
We report on the coupling and interaction between the fundamental resonances of planar metamaterials (split ring resonators) and inter-subband transitions in GaAs/AlGaAs quantum wells structures in the mid-infrared. An incident field polarized parallel to the sample surface is converted by the metamaterial resonators into a field with a finite component polarized normal to the surface, and interac…
▽ More
We report on the coupling and interaction between the fundamental resonances of planar metamaterials (split ring resonators) and inter-subband transitions in GaAs/AlGaAs quantum wells structures in the mid-infrared. An incident field polarized parallel to the sample surface is converted by the metamaterial resonators into a field with a finite component polarized normal to the surface, and interacts strongly with the large dipole moment associated with quantum well inter-subband transitions.
△ Less
Submitted 17 May, 2011;
originally announced May 2011.