Showing 1–8 of 8 results for author: Simon, S M

Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment

Authors: D. R. Barron, Z. Ahmed, J. Aguilar, A. J. Anderson, C. F. Baker, P. S. Barry, J. A. Beall, A. N. Bender, B. A. Benson, R. W. Besuner, T. W. Cecil, C. L. Chang, S. C. Chapman, G. E. Chesmore, G. Derylo, W. B. Doriese, S. M. Duff, T. Elleflot, J. P. Filippini, B. Flaugher, J. G. Gomez, P. K. Grimes, R. Gualtieri, I. Gullett, G. Haller , et al. (25 additional authors not shown)

Abstract: We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental… ▽ More We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over a wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4's science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 square meters of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Comments: 25 pages, 15 figures, presented at and published in the proceedings of SPIE Astronomical Telescopes and Instrumentation 2022

Optical design concept of the CMB-S4 large-aperture telescopes and cameras

Authors: Patricio A. Gallardo, Bradford Benson, John Carlstrom, Simon R. Dicker, Nick Emerson, Jon E. Gudmundsson, Richard Hills, Michele Limon, Jeff McMahon, Michael D. Niemack, Johanna M. Nagy, Stephen Padin, John Ruhl, Sara M. Simon, the CMB-S4 collaboration

Abstract: CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the la… ▽ More CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the large-aperture CMB-S4 telescopes, which consists of two optical configurations: (i) a new off-axis, three-mirror, free-form anastigmatic design and (ii) the existing coma-corrected crossed-Dragone design. We also present an overview of the optical configuration of the array of silicon optics cameras that will populate the focal plane with 85 diffraction-limited optics tubes covering up to 9 degrees of field of view, up to $1.1 \, \rm mm$ in wavelength. We describe the computational optimization methods that were put in place to implement the families of designs described here and give a brief update on the current status of the design effort. △ Less

Submitted 20 July, 2022; originally announced July 2022.

Snowmass Early Career: The Key Initiatives Organization

Authors: Joshua Barrow, Kristi L. Engel, Tiffany R. Lewis, Sara M. Simon, Jorge Torres

Abstract: In April 2020, the 2019 and 2020 American Physical Society's Division of Particles and Fields (APS DPF) Early Career Executive Committee (ECEC) members were tasked with organizing the formation of a representative body for High-Energy Physics (HEP) early career members for the Snowmass process by the DPF Executive Committee. Here, we outline the structure we developed and the process we followed t… ▽ More In April 2020, the 2019 and 2020 American Physical Society's Division of Particles and Fields (APS DPF) Early Career Executive Committee (ECEC) members were tasked with organizing the formation of a representative body for High-Energy Physics (HEP) early career members for the Snowmass process by the DPF Executive Committee. Here, we outline the structure we developed and the process we followed to help provide context and guidance for future early career Snowmass efforts. Our organization was composed of a cross-frontier branch with committees on Inreach, Diversity Equity and Inclusion, Survey, and Long Term Organizational Planning; in addition to the Frontier Coordination branch, formed by committees responsible for liaising with each Frontier. Throughout this document, the authors reflect on the triumphs and pitfalls of a program created from nothing over a very short period of time, by people with good intentions, who had no prior experience in building such an organization. Through this exercise of reflecting, we sometimes find that we would recommend a different path to our future selves. Insomuch as there are things to find fault with, it is in the robustness of the systems we built and refined. △ Less

Submitted 15 July, 2022; originally announced July 2022.

Comments: contribution to Snowmass 2021, 16 pages, 0 figures

Lifestyle and personal wellness in particle physics research activities

Authors: Tiffany R. Lewis, Sara M. Simon, Carla Bonifazi, Savannah Thais, Johan Sebastian Bonilla Castro, Kétévi A. Assamagan, Thomas Y. Chen

Abstract: Finding a balance between professional responsibilities and personal priorities is a great challenge of contemporary life and particularly within the HEPAC community. Failure to achieve a proper balance often leads to different degrees of mental and physical issues and affects work performance. In this paper, we discuss some of the main causes that lead to the imbalance between work and personal l… ▽ More Finding a balance between professional responsibilities and personal priorities is a great challenge of contemporary life and particularly within the HEPAC community. Failure to achieve a proper balance often leads to different degrees of mental and physical issues and affects work performance. In this paper, we discuss some of the main causes that lead to the imbalance between work and personal life in our academic field. We present some recommendations in order to establish mechanisms to create a healthier and more equitable work environment, for the different members of our community at the different levels of their careers. △ Less

Submitted 1 November, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

The Simons Observatory: HoloSim-ML: machine learning applied to the efficient analysis of radio holography measurements of complex optical systems

Authors: Grace E. Chesmore, Alexandre E. Adler, Nicholas F. Cothard, Nadia Dachlythra, Patricio A. Gallardo, Jon Gudmundsson, Bradley R. Johnson, Michele Limon, Jeff McMahon, Federico Nati, Michael D. Niemack, Giuseppe Puglisi, Sara M. Simon, Edward J. Wollack, Kevin Wolz, Zhilei Xu, Ningfeng Zhu

Abstract: Near-field radio holography is a common method for measuring and aligning mirror surfaces for millimeter and sub-millimeter telescopes. In instruments with more than a single mirror, degeneracies arise in the holography measurement, requiring multiple measurements and new fitting methods. We present HoloSim-ML, a Python code for beam simulation and analysis of radio holography data from complex op… ▽ More Near-field radio holography is a common method for measuring and aligning mirror surfaces for millimeter and sub-millimeter telescopes. In instruments with more than a single mirror, degeneracies arise in the holography measurement, requiring multiple measurements and new fitting methods. We present HoloSim-ML, a Python code for beam simulation and analysis of radio holography data from complex optical systems. This code uses machine learning to efficiently determine the position of hundreds of mirror adjusters on multiple mirrors with few micron accuracy. We apply this approach to the example of the Simons Observatory 6m telescope. △ Less

Submitted 5 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: Software is publicly available at: https://github.com/McMahonCosmologyGroup/holosim-ml

Simons Observatory Microwave SQUID Multiplexing Readout -- Cryogenic RF Amplifier and Coaxial Chain Design

Authors: Mayuri Sathyanarayana Rao, Maximiliano Silva-Feaver, Aamir Ali, Kam Arnold, Peter Ashton, Bradley J. Dober, Cody J. Duell, Shannon M. Duff, Nicholas Galitzki, Erin Healy, Shawn Henderson, Shuay-Pwu Patty Ho, Jonathan Hoh, Anna M. Kofman, Akito Kusaka, Adrian T. Lee, Aashrita Mangu, Justin Mathewson, Philip Mauskopf, Heather McCarrick, Jenna Moore, Michael D. Niemack, Christopher Raum, Maria Salatino, Trevor Sasse , et al. (11 additional authors not shown)

Abstract: The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiple… ▽ More The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiplexing factor of \bigO{(1,000)}, microwave SQUID multiplexing has never been deployed on the scale needed for SO. Here we present the design of the cryogenic coaxial cable and RF component chain that connects room temperature readout electronics to superconducting resonators that are coupled to Transition Edge Sensor bolometers operating at sub-Kelvin temperatures. We describe design considerations including cryogenic RF component selection, system linearity, noise, and thermal power dissipation. △ Less

Submitted 19 March, 2020; originally announced March 2020.

Comments: 10 pages, 2 figures

Journal ref: Journal of Low Temperature Physics, (2020), 1-10

Studies of Systematic Uncertainties for Simons Observatory: Optical Effects and Sensitivity Considerations

Authors: Patricio A. Gallardo, Jon Gudmundsson, Brian J. Koopman, Frederick T. Matsuda, Sara M. Simon, Aamir Ali, Sean Bryan, Yuji Chinone, Gabriele Coppi, Nicholas Cothard, Mark J. Devlin, Simon Dicker, Giulio Fabbian, Nicholas Galitzki, Charles A. Hill, Brian Keating, Akito Kusaka, Jacob Lashner, Adrian T. Lee, Michele Limon, Philip D. Mauskopf, Jeff McMahon, Federico Nati, Michael D. Niemack, John L. Orlowski-Scherer , et al. (10 additional authors not shown)

Abstract: The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work i… ▽ More The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup. △ Less

Submitted 15 August, 2018; originally announced August 2018.

Comments: Poster presented at SPIE Astronomical Telescopes and Instrumentation 2018

Far Sidelobes from Baffles and Telescope Support Structures in the Atacama Cosmology Telescope

Authors: Patricio A. Gallardo, Nicholas F. Cothard, Roberto Puddu, Rolando Dünner, Brian J. Koopman, Michael D. Niemack, Sara M. Simon, Edward J. Wollack

Abstract: The Atacama Cosmology Telescope (ACT) is a 6 m telescope located in the Atacama Desert, designed to measure the cosmic microwave background (CMB) with arcminute resolution. ACT, with its third generation polarization sensitive array, Advanced ACTPol, is being used to measure the anisotropies of the CMB in five frequency bands in large areas of the sky ($\sim 15,000$ $\rm deg^2$). These measurement… ▽ More The Atacama Cosmology Telescope (ACT) is a 6 m telescope located in the Atacama Desert, designed to measure the cosmic microwave background (CMB) with arcminute resolution. ACT, with its third generation polarization sensitive array, Advanced ACTPol, is being used to measure the anisotropies of the CMB in five frequency bands in large areas of the sky ($\sim 15,000$ $\rm deg^2$). These measurements are designed to characterize the large scale structure of the universe, test cosmological models and constrain the sum of the neutrino masses. As the sensitivity of these wide surveys increases, the control and validation of the far sidelobe response becomes increasingly important and is particularly challenging as multiple reflections, spillover, diffraction and scattering become difficult to model and characterize at the required levels. In this work, we present a ray trace model of the ACT upper structure which is used to describe much of the observed far sidelobe pattern. This model combines secondary mirror spillover measurements with a 3D CAD model based on photogrammetry measurements to simulate the beam of the camera and the comoving ground shield. This simulation shows qualitative agreement with physical optics tools and features observed in far sidelobe measurements. We present this method as an efficient first-order calculation that, although it does not capture all diffraction effects, informs interactions between the structural components of the telescope and the optical path, which can then be combined with more computationally intensive physical optics calculations. This method can be used to predict sidelobe patterns in the design stage of future optical systems such as the Simons Observatory, CCAT-prime, and CMB Stage IV. △ Less

Submitted 15 August, 2018; originally announced August 2018.

Comments: Poster presented at SPIE Astronomical Telescopes & Instrumentation 2018