Showing 1–50 of 235 results for author: Silva, C

Fluorescence Imaging of Individual Ions and Molecules in Pressurized Noble Gases for Barium Tagging in $^{136}$Xe

Authors: NEXT Collaboration, N. Byrnes, E. Dey, F. W. Foss, B. J. P. Jones, R. Madigan, A. McDonald, R. L. Miller, K. E. Navarro, L. R. Norman, D. R. Nygren, C. Adams, H. Almazán, V. Álvarez, B. Aparicio, A. I. Aranburu, L. Arazi, I. J. Arnquist, F. Auria-Luna, S. Ayet, C. D. R. Azevedo, J. E. Barcelon, K. Bailey, F. Ballester, M. del Barrio-Torregrosa , et al. (90 additional authors not shown)

Abstract: The imaging of individual Ba$^{2+}$ ions in high pressure xenon gas is one possible way to attain background-free sensitivity to neutrinoless double beta decay and hence establish the Majorana nature of the neutrino. In this paper we demonstrate selective single Ba$^{2+}$ ion imaging inside a high-pressure xenon gas environment. Ba$^{2+}$ ions chelated with molecular chemosensors are resolved at t… ▽ More The imaging of individual Ba$^{2+}$ ions in high pressure xenon gas is one possible way to attain background-free sensitivity to neutrinoless double beta decay and hence establish the Majorana nature of the neutrino. In this paper we demonstrate selective single Ba$^{2+}$ ion imaging inside a high-pressure xenon gas environment. Ba$^{2+}$ ions chelated with molecular chemosensors are resolved at the gas-solid interface using a diffraction-limited imaging system with scan area of 1$\times$1~cm$^2$ located inside 10~bar of xenon gas. This new form of microscopy represents an important enabling step in the development of barium tagging for neutrinoless double beta decay searches in $^{136}$Xe, as well as a new tool for studying the photophysics of fluorescent molecules and chemosensors at the solid-gas interface. △ Less

Submitted 20 May, 2024; originally announced June 2024.

The Design, Implementation, and Performance of the LZ Calibration Systems

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, E. E. Barillier, J. W. Bargemann, K. Beattie, T. Benson, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer , et al. (179 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low e… ▽ More LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low energy nuclear recoils. Surrounding the TPC, two veto detectors immersed in an ultra-pure water tank enable reducing background events to enhance the discovery potential. Intricate calibration systems are purposely designed to precisely understand the responses of these three detector volumes to various types of particle interactions and to demonstrate LZ's ability to discriminate between signals and backgrounds. In this paper, we present a comprehensive discussion of the key features, requirements, and performance of the LZ calibration systems, which play a crucial role in enabling LZ's WIMP-search and its broad science program. The thorough description of these calibration systems, with an emphasis on their novel aspects, is valuable for future calibration efforts in direct dark matter and other rare-event search experiments. △ Less

Submitted 20 June, 2024; v1 submitted 2 May, 2024; originally announced June 2024.

Enhancing the light yield of He:CF$_4$ based gaseous detector

Authors: F. D. Amaro, R. Antonietti, E. Baracchini, L. Benussi, S. Bianco, R. Campagnola, C. Capoccia, M. Caponero, D. S. Cardoso, L. G. M. de Carvalho, G. Cavoto, I. Abritta Costa, A. Croce, E. Dané, G. Dho, F. Di Giambattista, E. Di Marco, M. D'Astolfo, G. D'Imperio, D. Fiorina, F. Iacoangeli, Z. Islam, H. P. L. Jùnior, E. Kemp, G. Maccarrone , et al. (29 additional authors not shown)

Abstract: The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipp… ▽ More The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipped with an amplification stage made of a stack of three gas electron multipliers (GEMs) which are coupled to an optical readout. The latter consists in scientific CMOS (sCMOS) cameras and photomultipliers tubes (PMTs). The maximisation of the light yield of the amplification stage plays a major role in the determination of the energy threshold of the experiment. In this paper, we simulate the effect of the addition of a strong electric field below the last GEM plane on the GEM field structure and we experimentally test it by means of a 10$\times$10 cm$^2$ readout area prototype. The experimental measurements analyse stacks of different GEMs and helium concentrations in the gas mixture combined with this extra electric field, studying their performances in terms of light yield, energy resolution and intrinsic diffusion. It is found that the use of this additional electric field permits large light yield increases without degrading intrinsic characteristics of the amplification stage with respect to the regular use of GEMs. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Measurement of Energy Resolution with the NEXT-White Silicon Photomultipliers

Authors: T. Contreras, B. Palmeiro, H. Almazán, A. Para, G. Martínez-Lema, R. Guenette, C. Adams, V. Álvarez, B. Aparicio, A. I. Aranburu, L. Arazi, I. J. Arnquist, F. Auria-Luna, S. Ayet, C. D. R. Azevedo, K. Bailey, F. Ballester, M. del Barrio-Torregrosa, A. Bayo, J. M. Benlloch-Rodríguez, F. I. G. M. Borges, A. Brodolin, N. Byrnes, S. Cárcel, A. Castillo , et al. (85 additional authors not shown)

Abstract: The NEXT-White detector, a high-pressure gaseous xenon time projection chamber, demonstrated the excellence of this technology for future neutrinoless double beta decay searches using photomultiplier tubes (PMTs) to measure energy and silicon photomultipliers (SiPMs) to extract topology information. This analysis uses $^{83m}\text{Kr}$ data from the NEXT-White detector to measure and understand th… ▽ More The NEXT-White detector, a high-pressure gaseous xenon time projection chamber, demonstrated the excellence of this technology for future neutrinoless double beta decay searches using photomultiplier tubes (PMTs) to measure energy and silicon photomultipliers (SiPMs) to extract topology information. This analysis uses $^{83m}\text{Kr}$ data from the NEXT-White detector to measure and understand the energy resolution that can be obtained with the SiPMs, rather than with PMTs. The energy resolution obtained of (10.9 $\pm$ 0.6) $\%$, full-width half-maximum, is slightly larger than predicted based on the photon statistics resulting from very low light detection coverage of the SiPM plane in the NEXT-White detector. The difference in the predicted and measured resolution is attributed to poor corrections, which are expected to be improved with larger statistics. Furthermore, the noise of the SiPMs is shown to not be a dominant factor in the energy resolution and may be negligible when noise subtraction is applied appropriately, for high-energy events or larger SiPM coverage detectors. These results, which are extrapolated to estimate the response of large coverage SiPM planes, are promising for the development of future, SiPM-only, readout planes that can offer imaging and achieve similar energy resolution to that previously demonstrated with PMTs. △ Less

Submitted 30 May, 2024; originally announced May 2024.

The Data Acquisition System of the LZ Dark Matter Detector: FADR

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, E. E. Barillier, J. W. Bargemann, K. Beattie, T. Benson, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer , et al. (190 additional authors not shown)

Abstract: The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals.… ▽ More The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals. This information is used to determine if the digitized waveforms should be preserved for offline analysis. The system is designed around the Kintex-7 FPGA. In addition to digitizing the PMT signals and providing basic event selection in real time, the flexibility provided by the use of FPGAs allows us to monitor the performance of the detector and the DAQ in parallel to normal data acquisition. The hardware and software/firmware of this FPGA-based Architecture for Data acquisition and Realtime monitoring (FADR) are discussed and performance measurements are described. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Comments: 18 pages, 24 figures

Channeling Skyrmions: suppressing the skyrmion Hall effect in ferrimagnetic nanostripes

Authors: R. C. Silva, R. L. Silva, J. C. Moreira, W. A. Moura-Melo, A. R. Pereira

Abstract: The Skyrmion Hall Effect (SkHE) observed in ferromagnetic (FM) and ferrimagnetic (FI) skyrmions traveling due to a spin-polarized current can be a problematic issue when it comes to technological applications. By investigating the properties of FI skyrmions in racetracks through computational simulations, we have described the nature of their movement based on the relative values of the exchange,… ▽ More The Skyrmion Hall Effect (SkHE) observed in ferromagnetic (FM) and ferrimagnetic (FI) skyrmions traveling due to a spin-polarized current can be a problematic issue when it comes to technological applications. By investigating the properties of FI skyrmions in racetracks through computational simulations, we have described the nature of their movement based on the relative values of the exchange, Dzyaloshinskii-Moriya, and anisotropy coupling constants. Beyond that, using a design strategy, a magnetic channel-like nano-device is proposed in which a spin-polarized current protocol is created to successfully control the channel on which the skyrmion will travel without the adverse SkHE. Additionally, a simple adjustment in the current strength can modify the skyrmion position sideways between different parallel channels in the nanostripe. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: 10 pages, 9 figures

Journal ref: J. Appl. Phys. 135, 183902 (2024)

Machine learning and economic forecasting: the role of international trade networks

Authors: Thiago C. Silva, Paulo V. B. Wilhelm, Diego R. Amancio

Abstract: This study examines the effects of de-globalization trends on international trade networks and their role in improving forecasts for economic growth. Using section-level trade data from nearly 200 countries from 2010 to 2022, we identify significant shifts in the network topology driven by rising trade policy uncertainty. Our analysis highlights key global players through centrality rankings, with… ▽ More This study examines the effects of de-globalization trends on international trade networks and their role in improving forecasts for economic growth. Using section-level trade data from nearly 200 countries from 2010 to 2022, we identify significant shifts in the network topology driven by rising trade policy uncertainty. Our analysis highlights key global players through centrality rankings, with the United States, China, and Germany maintaining consistent dominance. Using a horse race of supervised regressors, we find that network topology descriptors evaluated from section-specific trade networks substantially enhance the quality of a country's GDP growth forecast. We also find that non-linear models, such as Random Forest, XGBoost, and LightGBM, outperform traditional linear models used in the economics literature. Using SHAP values to interpret these non-linear model's predictions, we find that about half of most important features originate from the network descriptors, underscoring their vital role in refining forecasts. Moreover, this study emphasizes the significance of recent economic performance, population growth, and the primary sector's influence in sha** economic growth predictions, offering novel insights into the intricacies of economic growth forecasting. △ Less

Submitted 11 April, 2024; originally announced April 2024.

TOFHIR2: The readout ASIC of the CMS Barrel MIP Timing Detector

Authors: E. Albuquerque, M. Araújo, A. Benaglia, A. Boletti, R. Bugalho, T. Coutinho, F. De Guio, P. Faccioli, L. Ferramacho, M. Firlej, T. Fiutowski, R. Francisco, M. Gallinaro, A. Ghezzi, J. Hollar, M. Idzik, H. Legoinha, N. Leonardo, C. Leong, M. T. Lucchini, M. Malberti, G. Marozzo, G. Da Molin, J. Moron, T. Niknejad , et al. (16 additional authors not shown)

Abstract: The CMS detector will be upgraded for the HL-LHC to include a MIP Timing Detector (MTD). The MTD will consist of barrel and endcap timing layers, BTL and ETL respectively, providing precision timing of charged particles. The BTL sensors are based on LYSO:Ce scintillation crystals coupled to SiPMs with TOFHIR2 ASICs for the front-end readout. A resolution of 30-60 ps for MIP signals at a rate of 2.… ▽ More The CMS detector will be upgraded for the HL-LHC to include a MIP Timing Detector (MTD). The MTD will consist of barrel and endcap timing layers, BTL and ETL respectively, providing precision timing of charged particles. The BTL sensors are based on LYSO:Ce scintillation crystals coupled to SiPMs with TOFHIR2 ASICs for the front-end readout. A resolution of 30-60 ps for MIP signals at a rate of 2.5 Mhit/s per channel is expected along the HL-LHC lifetime. We present an overview of the TOFHIR2 requirements and design, simulation results and measurements with TOFHIR2 ASICs. The measurements of TOFHIR2 associated to sensor modules were performed in different test setups using internal test pulses or blue and UV laser pulses emulating the signals expected in the experiment. The measurements show a time resolution of 24 ps initially during Beginning of Operation (BoO) and 58 ps at End of Operation (EoO) conditions, matching well the BTL requirements. We also showed that the time resolution is stable up to the highest expected MIP rate. Extensive radiation tests were performed, both with x-rays and heavy ions, showing that TOFHIR2 is not affected by the radiation environment during the experiment lifetime. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Comments: Editor: J. Varela

Interseções entre a Física e os saberes da tradição ceramista

Authors: Samuel Antonio Silva do Rosario, Carlos Aldemir Farias da Silva

Abstract: The growing interaction between traditional knowledge and formal sciences emerges as a relevant field of research. In this perspective, the aim of this article is to investigate the intersections between Physics and traditional knowledge in the ceramics practices of Vila Cuera, in Bragança, state of Para. Using an ethnographic approach, complemented by qualitative analysis, we realize that ceramis… ▽ More The growing interaction between traditional knowledge and formal sciences emerges as a relevant field of research. In this perspective, the aim of this article is to investigate the intersections between Physics and traditional knowledge in the ceramics practices of Vila Cuera, in Bragança, state of Para. Using an ethnographic approach, complemented by qualitative analysis, we realize that ceramists use their sensitive intuition and, masterfully, apply thermodynamic principles in the production of handmade ceramics. The results highlight the value of Ethnophysics, underlining that, long before the formal structuring of science as we know it, traditional societies already practiced and understood natural phenomena in tune with contemporary physical principles. We conclude that there is an inherent link between Physics and traditional knowledge with regard to the traditional ceramics practice, grounded on empirical observations and ancestral wisdom, that dialogues with science in a complementary relationship. The study highlights the importance of valuing and recognizing the knowledge of traditional populations by highlighting the knowledge doings of cultures and institutionalized science. △ Less

Submitted 19 March, 2024; originally announced April 2024.

Comments: in Portuguese

Journal ref: PARADIGMA, v. 45, n. 1, p. e2024021, 2024

The Dual Dynamical Foundation of Orthodox Quantum Mechanics

Authors: Diana Taschetto, Ricardo Correa da Silva

Abstract: This paper combines mathematical, philosophical, and historical analyses in a comprehensive investigation of the dynamical foundations of the formalism of orthodox quantum mechanics. The results obtained include: (i) A deduction of the canonical commutation relations (CCR) from the tenets of Matrix Mechanics; (ii) A discussion of the meaning of Schrödinger's first derivation of the wave equation t… ▽ More This paper combines mathematical, philosophical, and historical analyses in a comprehensive investigation of the dynamical foundations of the formalism of orthodox quantum mechanics. The results obtained include: (i) A deduction of the canonical commutation relations (CCR) from the tenets of Matrix Mechanics; (ii) A discussion of the meaning of Schrödinger's first derivation of the wave equation that not only improves on Joas and Lehner's 2009 investigation on the subject but also demonstrates that the CCR follow of necessity from Schrödinger's first derivation of the wave equation, thus correcting the common misconception that the CCR were only posited by Schrödinger to pursue equivalence with Matrix Mechanics; (iii) A discussion of the mathematical facts and requirements involved in the equivalence of Matrix and Wave Mechanics that improves on F. A. Muller's classical treatment of the subject; (iv) A proof that the equivalence of Matrix and Wave Mechanics is necessitated by the formal requirements of a dual action functional from which both the dynamical postulates of orthodox quantum mechanics, von Neumann's process 1 and process 2, follow; (v) A critical assessment, based on (iii) and (iv), of von Neumann's construction of unified quantum mechanics over Hilbert space. Point (iv) is our main result. It brings to the open the important, but hitherto ignored, fact that orthodox quantum mechanics is no exception to the golden rule of physics that the dynamics of a physical theory must follow from the action functional. If orthodox quantum mechanics, based as it is on the assumption of the equivalence of Matrix and Wave Mechanics, has this "peculiar dual dynamics," as von Neumann called it, this is so because by assuming the equivalence one has been assuming a peculiar dual action. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Modulating weak protein-protein cross-interactions by addition of free amino acids at millimolar concentrations

Authors: Pamina M. Winkler, Cécilia Siri, Johann Buczkowski, Juliana V. C. Silva, Lionel Bovetto, Christophe Schmitt, Francesco Stellacci

Abstract: In this paper, we quantify weak protein protein interactions in solution using Cross-Interaction Chromatography (CIC) and Surface Plasmon Resonance (SPR) and demonstrate that they can be modulated by the addition of free amino acids. With CIC, we determined the second osmotic virial cross-interaction coefficient (B23) as a proxy for the interaction strength between two different proteins. We perfo… ▽ More In this paper, we quantify weak protein protein interactions in solution using Cross-Interaction Chromatography (CIC) and Surface Plasmon Resonance (SPR) and demonstrate that they can be modulated by the addition of free amino acids. With CIC, we determined the second osmotic virial cross-interaction coefficient (B23) as a proxy for the interaction strength between two different proteins. We perform SPR experiments to establish the binding affinity between the same proteins. With CIC, we show that the amino acids proline, glutamine, and arginine render the protein cross-interactions more repulsive or equivalently less attractive. Specifically, we measured B23 between lysozyme (Lys) and bovine serum albumin (BSA) and between Lys and protein isolates (whey and canola). We find that B23 increases when amino acids are added to the solution even at millimolar concentrations, corresponding to protein ligand stoichiometric ratios as low as 1 to 1. With SPR, we show that the binding affinity between proteins can change by one order of magnitude when 10 mM of glutamine are added. In the case of Lys and one whey protein isolate it changes from the mM to the M, thus by three orders of magnitude. Interestingly, this efficient modulation of the protein cross-interactions does not alter the protein's secondary structure. The capacity of amino acids to modulate protein cross-interactions at mM concentrations is remarkable and may have an impact across fields in particular for specific applications in the food or pharmaceutical industries. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 12 pages, 5 figures

A demonstrator for a real-time AI-FPGA-based triggering system for sPHENIX at RHIC

Authors: J. Kvapil, G. Borca-Tasciuc, H. Bossi, K. Chen, Y. Chen, Y. Corrales Morales, H. Da Costa, C. Da Silva, C. Dean, J. Durham, S. Fu, C. Hao, P. Harris, O. Hen, H. Jheng, Y. Lee, P. Li, X. Li, Y. Lin, M. X. Liu, A. Olvera, M. L. Purschke, M. Rigatti, G. Roland, J. Schambach , et al. (6 additional authors not shown)

Abstract: The RHIC interaction rate at sPHENIX will reach around 3 MHz in pp collisions and requires the detector readout to reject events by a factor of over 200 to fit the DAQ bandwidth of 15 kHz. Some critical measurements, such as heavy flavor production in pp collisions, often require the analysis of particles produced at low momentum. This prohibits adopting the traditional approach, where data rates… ▽ More The RHIC interaction rate at sPHENIX will reach around 3 MHz in pp collisions and requires the detector readout to reject events by a factor of over 200 to fit the DAQ bandwidth of 15 kHz. Some critical measurements, such as heavy flavor production in pp collisions, often require the analysis of particles produced at low momentum. This prohibits adopting the traditional approach, where data rates are reduced through triggering on rare high momentum probes. We explore a new approach based on real-time AI technology, adopt an FPGA-based implementation using a custom designed FELIX-712 board with the Xilinx Kintex Ultrascale FPGA, and deploy the system in the detector readout electronics loop for real-time trigger decision. △ Less

Submitted 27 December, 2023; v1 submitted 22 December, 2023; originally announced December 2023.

Comments: 7 pages, 5 figures, proceedings for TWEPP 2023 conference, v2: corrected Table 1 numbers

Report number: LA-UR-23-32546

Evaluation of microscale crystallinity modification induced by laser writing on Mn3O4 thin films

Authors: Camila Ianhez-Pereira, Akhil Kuriakose, Ariano De Giovanni Rodrigues, Ana Luiza Costa Silva, Ottavia Jedrkiewicz, Monica Bollani, Marcio Peron Franco de Godoy

Abstract: Defining microstructures and managing local crystallinity allow the implementation of several functionalities in thin film technology. The use of ultrashort Bessel beams for bulk crystallinity modification has garnered considerable attention as a versatile technique for semiconductor materials, dielectrics, or metal oxide substrates. The aim of this work is the quantitative evaluation of the cryst… ▽ More Defining microstructures and managing local crystallinity allow the implementation of several functionalities in thin film technology. The use of ultrashort Bessel beams for bulk crystallinity modification has garnered considerable attention as a versatile technique for semiconductor materials, dielectrics, or metal oxide substrates. The aim of this work is the quantitative evaluation of the crystalline changes induced by ultrafast laser micromachining on manganese oxide thin films using micro-Raman spectroscopy. Pulsed Bessel beams featured by a 1 micrometer-sized central core are used to define structures with high spatial precision. The dispersion relation of Mn3O4 optical phonons is determined by considering the conjunction between X-ray diffraction characterization and the phonon localization model. The asymmetries in Raman spectra indicate phonon localization and enable a quantitative tool to determine the crystallite size at micrometer resolution. The results indicate that laser-writing is effective in modifying the low-crystallinity films locally, increasing crystallite sizes from ~8 nm up to 12 nm, and thus highlighting an interesting approach to evaluate laser-induced structural modifications on metal oxide thin films. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Comments: 27 pages

Optical trap** and manipulation of fluorescent polymer-based nanostructures: measuring optical properties of materials in the nanoscale range

Authors: T. A. Moura, M. L. Lana Júnior, C. H. V. da Silva, L. R. Américo, J. B. S. Mendes, M. C. N. P. Brandão, A. G. S. Subtil, M. S. Rocha

Abstract: We present a novel approach to determine the optical properties of materials in the nanoscale range using optical tweezers (OT). Fluorescent polymer-based nanostructures (pdots) are optically trapped in a Gaussian beam OT and the trap stiffness is studied as a function of various parameters of interest. We explicitly show that properties such as the refractive index and the optical anisotropy of t… ▽ More We present a novel approach to determine the optical properties of materials in the nanoscale range using optical tweezers (OT). Fluorescent polymer-based nanostructures (pdots) are optically trapped in a Gaussian beam OT and the trap stiffness is studied as a function of various parameters of interest. We explicitly show that properties such as the refractive index and the optical anisotropy of these nanostructures can be determined with high accuracy by comparing the experimental data to an optical force model. In particular, we demonstrate that the effective optical properties of these pdots can be modulated by changing the light wavelength that excites the sample, opening the door for a fine tuning of their optical response, with possible applications in the development of new sensors and/or other optoelectronic devices. △ Less

Submitted 31 October, 2023; v1 submitted 6 October, 2023; originally announced October 2023.

Post-fabrication tuning of circular Bragg resonators for enhanced emitter-cavity coupling

Authors: Tobias M. Krieger, Christian Weidinger, Thomas Oberleitner, Gabriel Undeutsch, Michele B. Rota, Naser Tajik, Maximilian Aigner, Quirin Buchinger, Christian Schimpf, Ailton J. Garcia Jr., Saimon F. Covre da Silva, Sven Höfling, Tobias Huber-Loyola, Rinaldo Trotta, Armando Rastelli

Abstract: Solid-state quantum emitters embedded in circular Bragg resonators are attractive due to their ability to emit quantum states of light with high brightness and low multi-photon probability. As for any emitter-microcavity system, fabrication imperfections limit the spatial and spectral overlap of the emitter with the cavity mode, thus limiting their coupling strength. Here, we show that an initial… ▽ More Solid-state quantum emitters embedded in circular Bragg resonators are attractive due to their ability to emit quantum states of light with high brightness and low multi-photon probability. As for any emitter-microcavity system, fabrication imperfections limit the spatial and spectral overlap of the emitter with the cavity mode, thus limiting their coupling strength. Here, we show that an initial spectral mismatch can be corrected after device fabrication by repeated wet chemical etching steps. We demonstrate ~16 nm wavelength tuning for optical modes in AlGaAs resonators on oxide, leading to a 4-fold Purcell enhancement of the emission of single embedded GaAs quantum dots. Numerical calculations reproduce the observations and suggest that the achievable performance of the resonator is only marginally affected in the explored tuning range. We expect the method to be applicable also to circular Bragg resonators based on other material platforms, thus increasing the device yield of cavity-enhanced solid-state quantum emitters. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Unraveling xenon primary scintillation yield for cutting-edge rare event experiments

Authors: C. A. O. Henriques, J. M. R. Teixeira, P. A. O. C. Silva, R. D. P. Mano, J. M. F. dos Santos, C. M. B. Monteiro

Abstract: Xenon scintillation has been widely used in rare event detection experiments such as neutrinoless double beta decay, double electron captures and dark matter searches. Nonetheless, experimental values for primary scintillation yield in gaseous xenon (GXe) remain scarce and dispersed. The mean energy required to produce a scintillation photon, wsc, in GXe in the absence of recombination has been me… ▽ More Xenon scintillation has been widely used in rare event detection experiments such as neutrinoless double beta decay, double electron captures and dark matter searches. Nonetheless, experimental values for primary scintillation yield in gaseous xenon (GXe) remain scarce and dispersed. The mean energy required to produce a scintillation photon, wsc, in GXe in the absence of recombination has been measured to be in the range of 34-111 eV. Lower values were reported for alpha-particles when compared to electrons produced by gamma- or x-rays. Since wsc is expected to be similar for x-, gamma-rays or electrons and alpha-particles, the above difference cannot be understood. In addition, one may pose the question of a dependence of wsc on photon energy. We carried out a systematic study on the absolute primary scintillation yield in GXe for electric fields in the 70-300 V/cm/bar range and for 1.2 bar supported by a robust geometrical efficiency simulation model. We were able to clear-out the above standing problems: we determined wsc for x/gamma-rays in the 5.9-60 keV range and alpha-particles in the 1.5-2.5 MeV range; no significant dependency neither on radiation type nor on energy was observed. Our values agree well with both state-of-art simulations and literature data obtained for alpha-particles. The discrepancy between our results and experimental values in the literature for x/gamma-rays is discussed in this work and attributed to unaddressed large systematic errors in previous studies. These findings can be extrapolated to other gases and have impact on experiments such as double beta decay, double electron capture and directional dark matter searches while also on potential future detection systems such as DUNE-Gas. Neglecting the 3rd continuum emission, as is the case of most of the literature values, a mean wsc-value of 38.7 [+- 0.6 (sta.)] [(- 7.2) (+ 7.7) (sys.)] eV was obtained. △ Less

Submitted 4 October, 2023; v1 submitted 25 September, 2023; originally announced September 2023.

Polarized and Un-Polarized Emission from a Single Emitter in a Bullseye Resonator

Authors: Giora Peniakov, Quirin Buchinger, Mohamed Helal, Simon Betzold, Yorick Reum, Michele B. Rota, Giuseppe Ronco, Mattia Beccaceci, Tobias M. Krieger, Saimon F. Covre Da Silva, Armando Rastelli, Rinaldo Trotta, Andreas Pfenning, Sven Hoefling, Tobias Huber-Loyola

Abstract: We present polarized |S|=0.99$\pm$0.01, and unpolarized |S|=0.03$\pm$0.01 emission from a single emitter embedded in a single, cylindrically symmetric device design. We show that the polarization stems from a position offset of the single emitter with respect to the cavity center, which breaks the cylindrical symmetry, and a position-dependent coupling to the frequency degenerate eigenmodes of the… ▽ More We present polarized |S|=0.99$\pm$0.01, and unpolarized |S|=0.03$\pm$0.01 emission from a single emitter embedded in a single, cylindrically symmetric device design. We show that the polarization stems from a position offset of the single emitter with respect to the cavity center, which breaks the cylindrical symmetry, and a position-dependent coupling to the frequency degenerate eigenmodes of the resonator structure. The experimental results are interpreted by using numerical simulations and by experimental map** of the polarization-resolved far-field emission patterns. Our findings can be generalized to any nanophotonic structure where two orthogonal eigenmodes are not fully spatially overlap**. △ Less

Submitted 5 October, 2023; v1 submitted 11 August, 2023; originally announced August 2023.

Comments: 15 pages, 5 figures

Journal ref: Laser & Photonics Reviews 2024, 2300835

Experimental study of a turbulent boundary layer with a rough-to-smooth change in surface conditions at high Reynolds numbers

Authors: Mogeng Li, Charitha M. de Silva, Daniel Chung, Dale I. Pullin, Ivan Marusic, Nicholas Hutchins

Abstract: This study presents an experimental dataset documenting the evolution of a turbulent boundary layer downstream of a rough-to-smooth surface transition. To investigate the effect of upstream flow conditions, two groups of experiments are conducted. For the \emph{Group-Re} cases, a nominally constant viscous-scaled equivalent sand grain roughness $k_{s0}^+\approx160$ is maintained on the rough surfa… ▽ More This study presents an experimental dataset documenting the evolution of a turbulent boundary layer downstream of a rough-to-smooth surface transition. To investigate the effect of upstream flow conditions, two groups of experiments are conducted. For the \emph{Group-Re} cases, a nominally constant viscous-scaled equivalent sand grain roughness $k_{s0}^+\approx160$ is maintained on the rough surface, while the friction Reynolds number $Re_{τ0}$ ranges from 7100 to 21000. For the \emph{Group-ks} cases, $Re_{τ0}\approx14000$ is maintained while $k_{s0}^+$ ranges from 111 to 228. The wall-shear stress on the downstream smooth surface is measured directly using oil-film interferometry to redress previously reported uncertainties in the skin-friction coefficient recovery trends. In the early development following the roughness transition, the flow in the internal layer is not in equilibrium with the wall-shear stress. This conflicts with the common practise of modelling the mean velocity profile as two log laws below and above the internal layer height, as first proposed by Elliott (\textit{Trans. Am. Geophys. Union}, vol. 39, 1958, pp 1048--1054). As a solution to this, the current data are used to model the recovering mean velocity semi-empirically by blending the corresponding rough-wall and smooth-wall profiles. The over-energised large-scale motions leave a strong footprint in the near-wall region of the energy spectrum, the frequency and magnitude of which exhibit dependence on $Re_{τ0}$ and $k_{s0}^+$ respectively. The energy distribution in near-wall small scales is mostly unaffected by the presence of the outer flow with rough-wall characteristics, which can be used as a surrogate measure to extract the local friction velocity. △ Less

Submitted 5 August, 2023; originally announced August 2023.

Journal ref: Journal of Fluid Mechanics, 923, A18 (2021)

Recovery of the wall-shear stress to equilibrium flow conditions after a rough-to-smooth step-change in turbulent boundary layers

Authors: Mogeng Li, Charitha M. de Silva, Amirreza Rouhi, Rio Baidya, Daniel Chung, Ivan Marusic, Nicholas Hutchins

Abstract: This paper examines recovery of the wall-shear stress of a turbulent boundary layer that has undergone a sudden transition from a rough to a smooth surface. Early works of Antonia and Luxton questioned the reliability of standard smooth-wall methods to measure wall-shear stress in such conditions, and subsequent studies show significant disagreement depending on the approach used to determine the… ▽ More This paper examines recovery of the wall-shear stress of a turbulent boundary layer that has undergone a sudden transition from a rough to a smooth surface. Early works of Antonia and Luxton questioned the reliability of standard smooth-wall methods to measure wall-shear stress in such conditions, and subsequent studies show significant disagreement depending on the approach used to determine the wall-shear stress downstream. Here we address this by utilising a collection of experimental databases at Re_τ\approx 4100 that have access to both `direct' and `indirect' measures of the wall-shear stress to understand the recovery to equilibrium conditions to the new surface. Our results reveal that the viscous region (z^+\lesssim 4) recovers almost immediately to an equilibrium state with the new wall conditions, however, the buffer region and beyond takes several boundary layer thicknesses before recovering to equilibrium conditions, which is longer than previously thought. A unique direct numerical simulation database of a wall-bounded flow with a rough-to-smooth wall transition is employed to confirm these findings. In doing so, we present evidence that any estimate of the wall-shear stress from the mean velocity profile in the buffer region or further away from the wall tends to underestimate its magnitude in the near vicinity of the rough-to-smooth transition, and this is likely to be partly responsible for the large scatter of recovery lengths to equilibrium conditions reported in the literature. Our results also reveal that the smaller energetic scales in the near-wall region recover to an equilibrium state associated with the new wall conditions within one boundary layer thickness downstream of the transition, while the larger energetic scales exhibit an over-energised state for several boundary layer thicknesses downstream of the transition. △ Less

Submitted 3 August, 2023; originally announced August 2023.

Journal ref: Journal of Fluid Mechanics, 872, 472-491 (2019)

Correlated noise enhances coherence and fidelity in coupled qubits

Authors: Eric R Bittner, Hao Li, Syad A. Shah, Carlos Silva, Andrei Piryatinski

Abstract: It is generally assumed that environmental noise arising from thermal fluctuations is detrimental to preserving coherence and entanglement in a quantum system. In the simplest sense, dephasing and decoherence are tied to energy fluctuations driven by coupling between the system and the normal modes of the bath. Here, we explore the role of noise correlation in an open-loop model quantum communicat… ▽ More It is generally assumed that environmental noise arising from thermal fluctuations is detrimental to preserving coherence and entanglement in a quantum system. In the simplest sense, dephasing and decoherence are tied to energy fluctuations driven by coupling between the system and the normal modes of the bath. Here, we explore the role of noise correlation in an open-loop model quantum communication system whereby the ``sender'' and the ``receiver'' are subject to local environments with various degrees of correlation or anticorrelation. We introduce correlation within the spectral density by solving a multidimensional stochastic differential equations and introduce these into the Redfield equations of motion for the system density matrix. We find that correlation can enhance both the fidelity and purity of a maximally entangled (Bell) state. Moreover, by comparing the evolution of different initial Bell states, we show that one can effectively probe the correlation between two local environments. These observations may be useful in the design of high-fidelity quantum gates and communication protocols. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Compact Chirped Fiber Bragg Gratings for Single-Photon Generation from Quantum Dots

Authors: Vikas Remesh, Ria G. Krämer, René Schwarz, Florian Kappe, Yusuf Karli, Malte Per Siems, Thomas K. Bracht, Saimon Filipe Covre da Silva, Armando Rastelli, Doris E. Reiter, Daniel Richter, Stefan Nolte, Gregor Weihs

Abstract: A scalable source of single photons is a key constituent of an efficient quantum photonic architecture. To realize this, it is beneficial to have an ensemble of quantum emitters that can be collectively excited with high efficiency. Semiconductor quantum dots hold great potential in this context, due to their excellent photophysical properties. Spectral variability of quantum dots is commonly rega… ▽ More A scalable source of single photons is a key constituent of an efficient quantum photonic architecture. To realize this, it is beneficial to have an ensemble of quantum emitters that can be collectively excited with high efficiency. Semiconductor quantum dots hold great potential in this context, due to their excellent photophysical properties. Spectral variability of quantum dots is commonly regarded as a drawback introduced by the fabrication method. However, this is beneficial to realize a frequency-multiplexed single-photon platform. Chirped pulse excitation, relying on the so-called adiabatic rapid passage, is the most efficient scheme to excite a quantum dot ensemble due to its immunity to individual quantum dot parameters. Yet, the existing methods of generating chirped laser pulses to excite a quantum emitter are bulky, lossy, and mechanically unstable, which severely hampers the prospects of a quantum dot photon source. Here, we present a compact, robust, and high-efficiency alternative for chirped pulse excitation of solid-state quantum emitters. Our simple plug-and-play module consists of chirped fiber Bragg gratings (CFBGs), fabricated via femtosecond inscription, to provide high values of dispersion in the near-infrared spectral range, where the quantum dots emit. We characterize and benchmark the performance of our method via chirped excitation of a GaAs quantum dot, establishing high-fidelity single-photon generation. Our highly versatile chir** module coupled to a photon source is a significant milestone toward realizing practical quantum photonic devices. △ Less

Submitted 20 June, 2023; originally announced June 2023.

Journal ref: APL Photonics, 2023

Integration of thermo-electric coolers into the CMS MTD SiPM arrays for operation under high neutron fluence

Authors: A. Bornheim, W. Lustermann, K. Stachon, G. Reales Gutiérrez, A. Benaglia, F. De Guio, A. Ghezzi, M. T. Lucchini, M. Malberti, S. Palluotto, T. Tabarelli de Fatis, M. Benettoni, R. Carlin, M. Tosi, R. Rossin, P. Meridiani, R. Paramatti, F. Santanastasio, J. C. Silva, J. Varela, A. Heering, A. Karneyeu, Y. Musienko, M. Wayne, T. Anderson , et al. (5 additional authors not shown)

Abstract: The barrel section of the novel MIP Timing Detector (MTD) will be constructed as part of the upgrade of the CMS experiment to provide a time resolution for single charged tracks in the range of $30-60$ ps using LYSO:Ce crystal arrays read out with Silicon Photomultipliers (SiPMs). A major challenge for the operation of such a detector is the extremely high radiation level, of about… ▽ More The barrel section of the novel MIP Timing Detector (MTD) will be constructed as part of the upgrade of the CMS experiment to provide a time resolution for single charged tracks in the range of $30-60$ ps using LYSO:Ce crystal arrays read out with Silicon Photomultipliers (SiPMs). A major challenge for the operation of such a detector is the extremely high radiation level, of about $2\times10^{14}$ 1 MeV(Si) Eqv. n/cm$^2$, that will be integrated over a decade of operation of the High Luminosity Large Hadron Collider (HL-LHC). Silicon Photomultipliers exposed to this level of radiation have shown a strong increase in dark count rate and radiation damage effects that also impact their gain and photon detection efficiency. For this reason during operations the whole detector is cooled down to about $-35^{\circ}$C. In this paper we illustrate an innovative and cost-effective solution to mitigate the impact of radiation damage on the timing performance of the detector, by integrating small thermo-electric coolers (TECs) on the back of the SiPM package. This additional feature, fully integrated as part of the SiPM array, enables a further decrease in operating temperature down to about $-45^{\circ}$C. This leads to a reduction by a factor of about two in the dark count rate without requiring additional power budget, since the power required by the TEC is almost entirely offset by a decrease in the power required for the SiPM operation due to leakage current. In addition, the operation of the TECs with reversed polarity during technical stops of the accelerator can raise the temperature of the SiPMs up to $60^{\circ}$C (about $50^{\circ}$C higher than the rest of the detector), thus accelerating the annealing of radiation damage effects and partly recovering the SiPM performance. △ Less

Submitted 23 August, 2023; v1 submitted 1 June, 2023; originally announced June 2023.

Journal ref: JINST 18 P08020 (2023)

Controlling the Photon Number Coherence of Solid-state Quantum Light Sources for Quantum Cryptography

Authors: Yusuf Karli, Daniel A. Vajner, Florian Kappe, Paul C. A. Hagen, Lena M. Hansen, René Schwarz, Thomas K. Bracht, Christian Schimpf, Saimon F. Covre da Silva, Philip Walther, Armando Rastelli, Vollrath Martin Axt, Juan C. Loredo, Vikas Remesh, Tobias Heindel, Doris E. Reiter, Gregor Weihs

Abstract: Quantum communication networks rely on quantum cryptographic protocols including quantum key distribution (QKD) using single photons. A critical element regarding the security of QKD protocols is the photon number coherence (PNC), i.e. the phase relation between the zero and one-photon Fock state, which critically depends on the excitation scheme. Thus, to obtain flying qubits with the desired pro… ▽ More Quantum communication networks rely on quantum cryptographic protocols including quantum key distribution (QKD) using single photons. A critical element regarding the security of QKD protocols is the photon number coherence (PNC), i.e. the phase relation between the zero and one-photon Fock state, which critically depends on the excitation scheme. Thus, to obtain flying qubits with the desired properties, optimal pum** schemes for quantum emitters need to be selected. Semiconductor quantum dots generate on-demand single photons with high purity and indistinguishability. Exploiting two-photon excitation of a quantum dot combined with a stimulation pulse, we demonstrate the generation of high-quality single photons with a controllable degree of PNC. Our approach provides a viable route toward secure communication in quantum networks. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Comments: 17 pages

Journal ref: npj Quantum Inf 10, 17 (2024)

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Reflection of a Diffuser in a Liquid Interface

Authors: C. Silva, R. Cabrita, V. N. Solovov, P. Brás, A. Lindote, G. Pereira, M. I. Lopes

Abstract: We present a novel method, based on the Saunderson corrections, to predict the reflectance between a liquid interface and a dielectric diffuser. In this method, the diffuse properties of the dielectric are characterized using a single parameter, the multiple-scattering albedo, which is the same irrespective of being in contact with air or liquid. We tested this method using an apparatus based on a… ▽ More We present a novel method, based on the Saunderson corrections, to predict the reflectance between a liquid interface and a dielectric diffuser. In this method, the diffuse properties of the dielectric are characterized using a single parameter, the multiple-scattering albedo, which is the same irrespective of being in contact with air or liquid. We tested this method using an apparatus based on a total integrating sphere capable of measuring reflectance in both liquid and gas interfaces across various wavelengths of light. We observed that the difference in the value of the multiple-scattering albedo between the sphere full of liquid and empty was less than 0.9$\times 10^{-3}$, with the average difference normalized to the respective uncertainty of only 0.7. These results confirm the reliability of our method and its potential for use in a wide range of practical applications. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Comments: 15 pages, 7 figures

A pump-probe experiment in cw-mode on ionization of Rydberg atoms

Authors: K. L. Romans, A. H. N. C. De Silva, B. P. Acharya, K. Foster, O. Russ, D. Fischer

Abstract: Rydberg atoms are in the focus of intense research due to the peculiar properties which make them interesting candidates for quantum optics and quantum information applications. In this work we study the ionization of Rydberg atoms due to their interaction with a trap** laser field, and a reaction microscope is used to measure photoelectron angular and energy distributions. Reaction microscopes… ▽ More Rydberg atoms are in the focus of intense research due to the peculiar properties which make them interesting candidates for quantum optics and quantum information applications. In this work we study the ionization of Rydberg atoms due to their interaction with a trap** laser field, and a reaction microscope is used to measure photoelectron angular and energy distributions. Reaction microscopes are excellent tools when brandished against atomic photoionization processes involving pulsed lasers; the timing tied to each pulse is crucial in solving the subsequent equations of motion for the atomic fragments in the spectrometer field. However, when used in pump-probe schemes, which rely on continuous wave probe lasers, vital information linked to the time of flight is lost. This study reports on a method in which the standard ReMi technique is extended in time through coincidence measurements. This is then applied to the photoionization of $^6$Li atoms initially prepared in optically pumped $2^{2}S_{1/2}$ and $2^{2}P_{3/2}$ states. Multi-photon excitation from a tunable femtosecond laser is exploited to produce Rydberg atoms inside an infrared optical dipole trap; the structure and dynamics of the subsequent cascade back towards ground is evaluated. △ Less

Submitted 26 June, 2023; v1 submitted 19 April, 2023; originally announced April 2023.

Comments: 11 pages, 10 figures

Topology optimization for stationary fluid-structure interaction problems with turbulent flow

Authors: Renato Picelli, Shahin Ranjbarzadeh, Raghavendra Sivapuram, Rafael dos Santos Gioria, Emílio Carlos Nelli Silva

Abstract: Topology optimization methods face serious challenges when applied to structural design with fluid-structure interaction (FSI) loads, specially for high Reynolds fluid flow. This paper devises an explicit boundary method that employs separate analysis and optimization grids in FSI systems. A geometry file is created after extracting a smooth contour from a set of binary design variables that defin… ▽ More Topology optimization methods face serious challenges when applied to structural design with fluid-structure interaction (FSI) loads, specially for high Reynolds fluid flow. This paper devises an explicit boundary method that employs separate analysis and optimization grids in FSI systems. A geometry file is created after extracting a smooth contour from a set of binary design variables that defines the structural design. The FSI problem can then be modeled with accurate physics and explicitly defined regions. The Finite Element Method is used to solve the fluid and structural domains. This is the first work to consider a turbulent flow in the fluid-structure topology optimization framework. The fluid flow is solved considering the $k-\varepsilon$ turbulence model including standard wall functions at the fluid and fluid-structure boundaries. The structure is considered to be linearly elastic. Semi-automatic differentiation is employed to compute sensitivities and an optimization problem using binary design variables is solved via sequential integer linear programming. The fluid loading is linearly interpolated in order to provide the sensitivities of the fluid flow on the fluid-structure interfaces. Results show that the proposed methodology is able to provide structural designs with smooth boundaries considering loads from low and high Reynolds flow. △ Less

Submitted 3 January, 2023; originally announced February 2023.

Comments: Preprint, 19 pages, 24 figures

The EXTRA-BL4S experiment for the measurement of the energy and angular distributions of transition radiation X-rays

Authors: M. N. Mazziotta, F. Loparco, A. Anelli, M. M. Belviso, A. Buquicchio, E. V. Cassano, M. De Cosmo, P. Ginefra, M. L. Martulli, C. Picci, D. Picicci, R. D. Soriano, A. P. Tatulli, G. Tripaldella, V. M. Zupo, M. F. Muscarella, S. Turbacci, M. Boselli, C. B. da Cruz E Silva, M. Joos, P. Schütze

Abstract: We have designed and implemented an experiment to measure the angular distributions and the energy spectra of the transition radiation X-rays emitted by fast electrons and positrons crossing different radiators. Our experiment was selected among the proposals of the 2021 Beamline for Schools contest, a competition for high-school students organized every year by CERN and DESY, and was performed at… ▽ More We have designed and implemented an experiment to measure the angular distributions and the energy spectra of the transition radiation X-rays emitted by fast electrons and positrons crossing different radiators. Our experiment was selected among the proposals of the 2021 Beamline for Schools contest, a competition for high-school students organized every year by CERN and DESY, and was performed at the DESY II Test Beam facility area TB21, using a high-purity beam of electrons or positrons with momenta in the range from 1 to 6 GeV/c. The measurements were performed using a 100 um thick silicon pixel detector, with a pitch of 55 um. Our results are consistent with the expectations from the theoretical models describing the production of transition radiation in multilayer regular radiators. △ Less

Submitted 21 March, 2023; v1 submitted 26 January, 2023; originally announced January 2023.

Comments: 18 pages, 11 figures; Version to match the accepted manuscript by JINST

Rivet and the analysis preservation in heavy-ion collisions experiments

Authors: Antonio Carlos Oliveira da Silva

Abstract: The comparison of experimental data and theoretical predictions is important for our understanding of the mechanisms for interactions and particle production in hadron collisions, both at the Large Hadron Collider and at the Relativistic Heavy-Ion Collider experiments. Several tools were ideated to help with that. Rivet (Robust Independent Validation of Experiment and Theory) is a framework that f… ▽ More The comparison of experimental data and theoretical predictions is important for our understanding of the mechanisms for interactions and particle production in hadron collisions, both at the Large Hadron Collider and at the Relativistic Heavy-Ion Collider experiments. Several tools were ideated to help with that. Rivet (Robust Independent Validation of Experiment and Theory) is a framework that facilitates the comparison between measurements from high-energy physics experiments and Monte Carlo event generators able to produce outputs using the HepMC package. Rivet contains a repository with analysis algorithms developed by experiments, providing analysis documentation and preservation. The recent development of features for the implementation of heavy-ion collision analyses, such as centrality determination, will be presented in this contribution, together with some of the open points still to be addressed. △ Less

Submitted 6 January, 2023; originally announced January 2023.

Comments: Proceedings of 37th Winter Workshop on Nuclear Dynamics. March 2022, Puerto Vallarta, Mexico

Background Determination for the LUX-ZEPLIN (LZ) Dark Matter Experiment

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, S. K. Alsum, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, J. Bang, J. W. Bargemann, A. Baxter, K. Beattie, P. Beltrame, E. P. Bernard, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, G. M. Blockinger, B. Boxer , et al. (178 additional authors not shown)

Abstract: The LUX-ZEPLIN experiment recently reported limits on WIMP-nucleus interactions from its initial science run, down to $9.2\times10^{-48}$ cm$^2$ for the spin-independent interaction of a 36 GeV/c$^2$ WIMP at 90% confidence level. In this paper, we present a comprehensive analysis of the backgrounds important for this result and for other upcoming physics analyses, including neutrinoless double-bet… ▽ More The LUX-ZEPLIN experiment recently reported limits on WIMP-nucleus interactions from its initial science run, down to $9.2\times10^{-48}$ cm$^2$ for the spin-independent interaction of a 36 GeV/c$^2$ WIMP at 90% confidence level. In this paper, we present a comprehensive analysis of the backgrounds important for this result and for other upcoming physics analyses, including neutrinoless double-beta decay searches and effective field theory interpretations of LUX-ZEPLIN data. We confirm that the in-situ determinations of bulk and fixed radioactive backgrounds are consistent with expectations from the ex-situ assays. The observed background rate after WIMP search criteria were applied was $(6.3\pm0.5)\times10^{-5}$ events/keV$_{ee}$/kg/day in the low-energy region, approximately 60 times lower than the equivalent rate reported by the LUX experiment. △ Less

Submitted 17 July, 2023; v1 submitted 30 November, 2022; originally announced November 2022.

Comments: 25 pages, 15 figures

Journal ref: Phys. Rev. D 108, 012010 (2023)

Diffusion of muonic hydrogen in hydrogen gas and the measurement of the 1$s$ hyperfine splitting of muonic hydrogen

Authors: J. Nuber, A. Adamczak, M. Abdou Ahmed, L. Affolter, F. D. Amaro, P. Amaro, P. Carvalho, Y. -H. Chang, T. -L. Chen, W. -L. Chen, L. M. P. Fernandes, M. Ferro, D. Goeldi, T. Graf, M. Guerra, T. W. Hänsch, C. A. O. Henriques, M. Hildebrandt, P. Indelicato, O. Kara, K. Kirch, A. Knecht, F. Kottmann, Y. -W. Liu, J. Machado , et al. (24 additional authors not shown)

Abstract: The CREMA collaboration is pursuing a measurement of the ground-state hyperfine splitting (HFS) in muonic hydrogen ($μ$p) with 1 ppm accuracy by means of pulsed laser spectroscopy. In the proposed experiment, the $μ$p atom is excited by a laser pulse from the singlet to the triplet hyperfine sub-levels, and is quenched back to the singlet state by an inelastic collision with a H$_2$ molecule. The… ▽ More The CREMA collaboration is pursuing a measurement of the ground-state hyperfine splitting (HFS) in muonic hydrogen ($μ$p) with 1 ppm accuracy by means of pulsed laser spectroscopy. In the proposed experiment, the $μ$p atom is excited by a laser pulse from the singlet to the triplet hyperfine sub-levels, and is quenched back to the singlet state by an inelastic collision with a H$_2$ molecule. The resulting increase of kinetic energy after this cycle modifies the $μ$p atom diffusion in the hydrogen gas and the arrival time of the $μ$p atoms at the target walls. This laser-induced modification of the arrival times is used to expose the atomic transition. In this paper we present the simulation of the $μ$p diffusion in the H$_2$ gas which is at the core of the experimental scheme. These simulations have been implemented with the Geant4 framework by introducing various low-energy processes including the motion of the H$_2$ molecules, i.e. the effects related with the hydrogen target temperature. The simulations have been used to optimize the hydrogen target parameters (pressure, temperatures and thickness) and to estimate signal and background rates. These rates allow to estimate the maximum time needed to find the resonance and the statistical accuracy of the spectroscopy experiment. △ Less

Submitted 24 May, 2023; v1 submitted 15 November, 2022; originally announced November 2022.

Comments: Submission to SciPost

An RPC-PET brain scanner demonstrator: first results

Authors: Paulo Fonte, Luís Lopes, Rui Alves, Nuno Carolino, Paulo Crespo, Miguel Couceiro, Orlando Cunha, Nuno Dias, Nuno C. Ferreira, Susete Fetal, Ana L. Lopes, Jan Michel, Jorge Moreira, Américo Pereira, João Saraiva, Carlos Silva, Magda Silva, Michael Traxler, Antero Abrunhosa, Alberto Blanco, Miguel Castelo-Branco, Mário Pimenta

Abstract: We present first results from a Positron Emission Tomography (PET) scanner demonstrator based on Resistive Plate Chambers and specialized for brain imaging. The device features a 30 cm wide cubic field-of-view and each detector comprises 40 gas gaps with 3D location of the interaction point of the photon. Besides other imagery, we show that the reconstructed image resolution, as evaluated by a hot… ▽ More We present first results from a Positron Emission Tomography (PET) scanner demonstrator based on Resistive Plate Chambers and specialized for brain imaging. The device features a 30 cm wide cubic field-of-view and each detector comprises 40 gas gaps with 3D location of the interaction point of the photon. Besides other imagery, we show that the reconstructed image resolution, as evaluated by a hot-rod phantom, is sub-millimetric, which is beyond the state-of-the-art of the standard PET technology for this application. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Categorization of Thermoacoustic Modes in an Ideal Resonator with Phasor Diagrams

Authors: Kah Joon Yong, Camilo F. Silva, Guillaume J. J. Fournier, Wolfgang Polifke

Abstract: A recent study (Yong, Silva, and Polifke, Combust. Flame 228 (2021)) proposed the use of phasor diagrams to categorize marginally stable modes in an ideal resonator with a compact, velocity-sensitive flame. Modes with velocity phasors that reverse direction across the flame were categorized as ITA modes. The present study extends this concept to growing and decaying modes. In other words, with the… ▽ More A recent study (Yong, Silva, and Polifke, Combust. Flame 228 (2021)) proposed the use of phasor diagrams to categorize marginally stable modes in an ideal resonator with a compact, velocity-sensitive flame. Modes with velocity phasors that reverse direction across the flame were categorized as ITA modes. The present study extends this concept to growing and decaying modes. In other words, with the method proposed, it is possible to distinguish whether a given thermoacoustic mode -- regardless of its stability -- should be categorized as acoustic or ITA. The method proposed does not rely on any parametric sweep, but on the angle relating the velocity phasors across the flame. This method of categorization reveals distinct regions in the complex plane where acoustic and ITA eigenfrequencies are localized. Additionally, we analyze the medium oscillation at the flame location to construct a physically intuitive understanding of the proposed categorization method. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Comments: to be published in Combustion and Flame

The influence of illumination conditions in the measurement of built-in electric field at p-n junctions by 4D-STEM

Authors: Bruno C da Silva, Zahra S Momtaz, Lucas Bruas, Jean-Luc Rouviére, Hanako Okuno, David Cooper, Martien I Den-Hertog

Abstract: Momentum resolved 4D-STEM, also called center of mass (CoM) analysis, has been used to measure the long range built-in electric field of a silicon p-n junction. The effect of different STEM modes and the trade-off between spatial resolution and electric field sensitivity are studied. Two acquisition modes are compared: nanobeam and low magnification (LM) modes. A thermal noise free Medipix3 direct… ▽ More Momentum resolved 4D-STEM, also called center of mass (CoM) analysis, has been used to measure the long range built-in electric field of a silicon p-n junction. The effect of different STEM modes and the trade-off between spatial resolution and electric field sensitivity are studied. Two acquisition modes are compared: nanobeam and low magnification (LM) modes. A thermal noise free Medipix3 direct electron detector with high speed acquisition has been used to study the influence of low electron beam current and millisecond dwell times on the measured electric field and standard deviation. It is shown that LM conditions can underestimate the electric field values due to a bigger probe size used but provide an improvement of almost one order of magnitude on the signal-to-noise ratio, leading to a detection limit of 0.011MV/cm. It is observed that the CoM results do not vary with acquisition time or electron dose as low as 24 $e^-/A^2$, showing that the electron beam does not influence the built-in electric field and that this method can be robust for studying beam sensitive materials, where a low dose is needed. △ Less

Submitted 2 November, 2022; originally announced November 2022.

Journal ref: Applied Physics Letters, American Institute of Physics, 2022, 121 (12), pp.123503

QuDPy: A Python-Based Tool For Computing Ultrafast Non-linear Optical Responses

Authors: S. A. Shah, Hao Li, Eric R. Bittner, Carlos Silva, Andrei Piryatinski

Abstract: Nonlinear Optical Spectroscopy is a well-developed field with theoretical and experimental advances that have aided multiple fields including chemistry, biology and physics. However, accurate quantum dynamical simulations based on model Hamiltonians are need to interpret the corresponding multi-dimensional spectral signals properly. In this article, we present the initial release of our code, QuDP… ▽ More Nonlinear Optical Spectroscopy is a well-developed field with theoretical and experimental advances that have aided multiple fields including chemistry, biology and physics. However, accurate quantum dynamical simulations based on model Hamiltonians are need to interpret the corresponding multi-dimensional spectral signals properly. In this article, we present the initial release of our code, QuDPy (quantum dynamics in python) which addresses the need for a robust numerical platform for performing quantum dynamics simulations based on model systems, including open quantum systems. An important feature of our approach is that one can specify various high-order optical response pathways in the form of double-sided Feynman diagrams via a straightforward input syntax that specifies the time-ordering of ket-sided or bra-sided optical interactions acting upon the time-evolving density matrix of the system. We use the quantum dynamics capabilities of QuTip for simulating the spectral response of complex systems to compute essentially any n-th-order optical response of the model system. We provide a series of example calculations to illustrate the utility of our approach. △ Less

Submitted 24 July, 2023; v1 submitted 28 October, 2022; originally announced October 2022.

Journal ref: Computer Physics Communications, Volume 292, 2023, 108891

Evidence that superstructures comprise of self-similar coherent motions in high $Re_τ$ boundary layers

Authors: Rahul Deshpande, Charitha M. de Silva, Ivan Marusic

Abstract: We present experimental evidence that the superstructures in turbulent boundary layers comprise of smaller, geometrically self-similar coherent motions. The evidence comes from identifying and analyzing instantaneous superstructures from large-scale particle image velocimetry datasets acquired at high Reynolds numbers, capable of capturing streamwise elongated motions extending up to 12 times the… ▽ More We present experimental evidence that the superstructures in turbulent boundary layers comprise of smaller, geometrically self-similar coherent motions. The evidence comes from identifying and analyzing instantaneous superstructures from large-scale particle image velocimetry datasets acquired at high Reynolds numbers, capable of capturing streamwise elongated motions extending up to 12 times the boundary layer thickness. Given the challenge in identifying the constituent motions of the superstructures based on streamwise velocity signatures, a new approach is adopted that analyzes the wall-normal velocity fluctuations within these very long motions, which reveals the constituent motions unambiguously. The conditional streamwise energy spectra of the wall-normal fluctuations, corresponding exclusively to the superstructure region, are found to exhibit the well-known distance-from-the-wall scaling in the intermediate scale range. Similar characteristics are also exhibited by the Reynolds shear stress co-spectra estimated for the superstructure region, suggesting that geometrically self-similar motions are the constituent motions of these very-large-scale structures. Investigation of the spatial organization of the wall-normal momentum-carrying eddies also lends empirical support to the concatenation hypothesis for the formation of the superstructures. Association between the superstructures and self-similar motions is reaffirmed on comparing the vertical correlations of the momentum carrying motions, which are found to match with the mean correlations. The mean vertical coherence of these motions, investigated for the log-region across three decades of Reynolds numbers, exhibits a unique distance-from-the-wall scaling invariant with Reynolds number. The findings support the prospect for modelling these dynamically significant motions via data-driven coherent structure-based models. △ Less

Submitted 8 July, 2023; v1 submitted 12 October, 2022; originally announced October 2022.

Comments: Manuscript accepted for the Journal of Fluid Mechanics, with 25 pages, 15 figures

Journal ref: Journal of Fluid Mechanics 2023, Volume 969 , A10

Improved Dark Matter Search Sensitivity Resulting from LUX Low-Energy Nuclear Recoil Calibration

Authors: LUX Collaboration, D. S. Akerib, S. Alsum, H. M. Araújo, X. Bai, J. Balajthy, J. Bang, A. Baxter, E. P. Bernard, A. Bernstein, T. P. Biesiadzinski, E. M. Boulton, B. Boxer, P. Brás, S. Burdin, D. Byram, M. C. Carmona-Benitez, C. Chan, J. E. Cutter, L. de Viveiros, E. Druszkiewicz, A. Fan, S. Fiorucci, R. J. Gaitskell, C. Ghag , et al. (72 additional authors not shown)

Abstract: Dual-phase xenon time projection chamber (TPC) detectors have demonstrated superior search sensitivities to dark matter over a wide range of particle masses. To extend their sensitivity to include low-mass dark matter interactions, it is critical to characterize both the light and charge responses of liquid xenon to sub-keV nuclear recoils. In this work, we report a new nuclear recoil calibration… ▽ More Dual-phase xenon time projection chamber (TPC) detectors have demonstrated superior search sensitivities to dark matter over a wide range of particle masses. To extend their sensitivity to include low-mass dark matter interactions, it is critical to characterize both the light and charge responses of liquid xenon to sub-keV nuclear recoils. In this work, we report a new nuclear recoil calibration in the LUX detector $\textit{in situ}$ using neutron events from a pulsed Adelphi Deuterium-Deuterium neutron generator. We demonstrate direct measurements of light and charge yields down to 0.45 keV (1.4 scintillation photons) and 0.27 keV (1.3 ionization electrons), respectively, approaching the physical limit of liquid xenon detectors. We discuss the implication of these new measurements on the physics reach of dual-phase xenon TPCs for nuclear-recoil-based low-mass dark matter detection. △ Less

Submitted 14 October, 2022; v1 submitted 11 October, 2022; originally announced October 2022.

Forward silicon tracking detector developments for the future Electron-Ion Collider

Authors: Xuan Li, Melynda Brooks, Matt Durham, Ming Liu, Yasser Corrales Morales, Kei Nagai, Anton Navazo, Christopher Prokop, Eric Renner, Walter Sondheim, Cesar da Silva

Abstract: The future Electron-Ion Collider (EIC) will utilize a series of high-luminosity high-energy electron+proton ($e+p$) and electron+nucleus ($e+A$) collisions to explore the inner structure of nucleon and nucleus and the matter formation process. Heavy flavor hadron and jet measurements at the EIC will play an essential role in determining the nucleon/nucleus parton distribution function and heavy qu… ▽ More The future Electron-Ion Collider (EIC) will utilize a series of high-luminosity high-energy electron+proton ($e+p$) and electron+nucleus ($e+A$) collisions to explore the inner structure of nucleon and nucleus and the matter formation process. Heavy flavor hadron and jet measurements at the EIC will play an essential role in determining the nucleon/nucleus parton distribution function and heavy quark hadronization process in not well constrained kinematic regions. A high granularity and low material budget forward silicon tracker will enable precise forward heavy flavor measurements at the EIC, which have enhanced sensitivities to access these kinematic extremes. A Forward Silicon Tracker (FST) detector is under design and R$\&$D for the EIC. Two advanced silicon technologies, the Depleted Monolithic Active Pixel Sensor (DMAPS) and the AC coupled Low Gain Avalanche Diode (AC-LGAD), which can provide fine spatial and timing resolutions, have been considered as candidates for the EIC silicon tracking detector. Progresses and results about the FST conceptual design and ongoing DMAPS and LGAD detector R$\&$D will be presented. The path towards an integrated EIC detector will be discussed as well. △ Less

Submitted 14 October, 2022; v1 submitted 10 October, 2022; originally announced October 2022.

Comments: 7 pages, 5 figures, proceeding for 41st International Conference on High Energy Physics - ICHEP2022, accepted by PoS

Report number: LANL report number: LA-UR-22-30327

Journal ref: PoS (ICHEP2022)326

Towards realistic simulations of human cough: effect of droplet emission duration and spread angle

Authors: Mogeng Li, Kai Leong Chong, Chong Shen Ng, Prateek Bahl, Charitha M. de Silva, Roberto Verzicco, Con Doolan, C. Raina MacIntyre, Detlef Lohse

Abstract: Human respiratory events, such as coughing and sneezing, play an important role in the host-to-host airborne transmission of diseases. Thus, there has been a substantial effort in understanding these processes: various analytical or numerical models have been developed to describe them, but their validity has not been fully assessed due to the difficulty of a direct comparison with real human exha… ▽ More Human respiratory events, such as coughing and sneezing, play an important role in the host-to-host airborne transmission of diseases. Thus, there has been a substantial effort in understanding these processes: various analytical or numerical models have been developed to describe them, but their validity has not been fully assessed due to the difficulty of a direct comparison with real human exhalations. In this study, we report a unique comparison between datasets that have both detailed measurements of a real human cough using spirometer and particle tracking velocimetry, and direct numerical simulation at similar conditions. By examining the experimental data, we find that the injection velocity at the mouth is not uni-directional. Instead, the droplets are injected into various directions, with their trajectories forming a cone shape in space. Furthermore, we find that the period of droplet emissions is much shorter than that of the cough: experimental results indicate that the droplets with an initial diameter $\gtrsim 10μ$m are emitted within the first 0.05 s, whereas the cough duration is closer to 1 s. These two features (the spread in the direction of injection velocity and the short duration of droplet emission) are incorporated into our direct numerical simulation, leading to an improved agreement with the experimental measurements. Thus, to have accurate representations of human expulsions in respiratory models, it is imperative to include parametrisation of these two features. △ Less

Submitted 2 October, 2022; originally announced October 2022.

Journal ref: Int. J. Multiph. Flow 147 (2022) 103883

Cherenkov Diffraction Radiation Emissions from Single Electrons and Positrons on a Fused Silica Radiator

Authors: Silas Ruhrberg Estevez, Tobias Baumgartner, Johann Bahl, Thomas Lehrach, Tobias Thole, Benildur Nickel, Philipp Loewe, Lukas Hildebrandt, Cristovao Beirao da Cruz E Silva, Paul Schuetze, Markus Joos

Abstract: Beam diagnostics are crucial for smooth accelerator operations. Many techniques rely on instrumentation in which the beam properties are significantly affected by the measurement. Novel approaches aim to use Cherenkov Diffraction Radiation (ChDR) for non-invasive diagnostics. Unlike regular Cherenkov Radiation, the charged particles do not have to move inside of the medium, but it is sufficient fo… ▽ More Beam diagnostics are crucial for smooth accelerator operations. Many techniques rely on instrumentation in which the beam properties are significantly affected by the measurement. Novel approaches aim to use Cherenkov Diffraction Radiation (ChDR) for non-invasive diagnostics. Unlike regular Cherenkov Radiation, the charged particles do not have to move inside of the medium, but it is sufficient for them to move in its vicinity as long as they are faster than the speed of light in the medium. Changes to the beam properties due to ChDR measurements are consequently negligible. To examine ChDR emission under different conditions, we placed a fused silica radiator in the DESY II Test Beam. We observed a linear increase in ChDR intensity for electron and positron momenta between 1 GeV/c and 5 GeV/c. Additionally, we found that electrons produce significantly more ChDR than positrons for increasing particle momenta. The results suggest a need for further research into the ChDR generation by electrons and positrons and may find application in the design of future beam diagnostic devices. △ Less

Submitted 22 September, 2022; originally announced September 2022.

Assessment of active dopants and p-n junction abruptness using in-situ biased 4D-STEM

Authors: Bruno C. da Silva, Zahra S. Momtaz, Eva Monroy, Hanako Okuno, Jean-Luc Rouviere, David Cooper, Martien I. den-Hertog

Abstract: A key issue in the development of high-performance semiconductor devices is the ability to properly measure active dopants at the nanometer scale. 4D scanning transmission electron microscopy and off-axis electron holography have opened up the possibility of studying the electrostatic properties of a p-n junction with nm-scale spatial resolution. The complete description of a p-n junction must tak… ▽ More A key issue in the development of high-performance semiconductor devices is the ability to properly measure active dopants at the nanometer scale. 4D scanning transmission electron microscopy and off-axis electron holography have opened up the possibility of studying the electrostatic properties of a p-n junction with nm-scale spatial resolution. The complete description of a p-n junction must take into account the precise evolution of the concentration of dopants around the junction, since the sharpness of the dopant transition directly influences the built-in potential and the maximum electric field. Here, a contacted silicon p-n junction is studied through in-situ biased 4D-STEM. Measurements of electric field, built-in voltage, depletion region width and charge density in the space charge region are combined with analytical equations as well as finite-element simulations in order to evaluate the quality of the junction interface. The nominally-symmetric, highly doped ($N_A = N_D = 9\space x \space10^{18} cm^{-3}$) junction presents an electric field and built-in voltage much lower than expected for an abrupt junction. These experimental results are consistent with electron holography data. All measured junction parameters are compatible with the presence of an intermediate region with a graded profile of the dopants at the p-n interface. This hypothesis is also consistent with the evolution of the electric field with bias. These results demonstrate that in-situ biased 4D-STEM enables a better understanding of the electrical properties of semiconductor p-n junctions with nm-scale resolution. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: 13 pages, 5 figures

Collective Excitation of Spatio-Spectrally Distinct Quantum Dots Enabled by Chirped Pulses

Authors: Florian Kappe, Yusuf Karli, Thomas K. Bracht, Saimon Covre da Silva, Tim Seidelmann, Vollrath Martin Axt, Armando Rastelli, Gregor Weihs, Doris E. Reiter, Vikas Remesh

Abstract: For a scalable photonic device producing entangled photons, it is desirable to have multiple quantum emitters in an ensemble that can be collectively excited, despite their spectral variability. For quantum dots, Rabi rotation, the most popular method for resonant excitation, cannot assure a universal, highly efficient excited state preparation, because of its sensitivity to the excitation paramet… ▽ More For a scalable photonic device producing entangled photons, it is desirable to have multiple quantum emitters in an ensemble that can be collectively excited, despite their spectral variability. For quantum dots, Rabi rotation, the most popular method for resonant excitation, cannot assure a universal, highly efficient excited state preparation, because of its sensitivity to the excitation parameters. In contrast, Adiabatic Rapid Passage (ARP), relying on chirped optical pulses, is immune to quantum dot spectral inhomogeneity. Here, we advocate the robustness of ARP for simultaneous excitation of the biexciton states of multiple quantum dots. For positive chirps, we find that there is also regime of phonon advantage that widens the tolerance range of spectral detunings. Using the same laser pulse we demonstrate the simultaneous excitation of energetically and spatially distinct quantum dots. Being able to generate spatially multiplexed entangled photon pairs is a big step towards the scalability of photonic devices. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Experimental Multi-state Quantum Discrimination in the Frequency Domain with Quantum Dot Light

Authors: Alessandro Laneve, Michele B. Rota, Francesco Basso Basset, Nicola P. Fiorente, Tobias M. Krieger, Saimon F. Covre da Silva, Quirin Buchinger, Sandra Stroj, Sven Hoefling, Tobias Huber-Loyola, Armando Rastelli, Rinaldo Trotta, Paolo Mataloni

Abstract: The quest for the realization of effective quantum state discrimination strategies is of great interest for quantum information technology, as well as for fundamental studies. Therefore, it is crucial to develop new and more efficient methods to implement discrimination protocols for quantum states. Among the others, single photon implementations are more advisable, because of their inherent secur… ▽ More The quest for the realization of effective quantum state discrimination strategies is of great interest for quantum information technology, as well as for fundamental studies. Therefore, it is crucial to develop new and more efficient methods to implement discrimination protocols for quantum states. Among the others, single photon implementations are more advisable, because of their inherent security advantage in quantum communication scenarios. In this work, we present the experimental realization of a protocol employing a time-multiplexing strategy to optimally discriminate among eight non-orthogonal states, encoded in the four-dimensional Hilbert space spanning both the polarization degree of freedom and photon energy. The experiment, built on a custom-designed bulk optics analyser setup and single photons generated by a nearly deterministic solid-state source, represents a benchmarking example of minimum error discrimination with actual quantum states, requiring only linear optics and two photodetectors to be realized. Our work paves the way for more complex applications and delivers a novel approach towards high-dimensional quantum encoding and decoding operations. △ Less

Submitted 17 September, 2022; originally announced September 2022.

Identifying incoherent mixing effects in the coherent two-dimensional photocurrent excitation spectra of semiconductors

Authors: Ilaria Bargigia, Elizabeth Gutiérrez-Meza, David A. Valverde-Chávez, Sarah R. Marques, Ajay Ram Srimath Kandada, Carlos Silva

Abstract: We have previously demonstrated that in the context of two-dimensional (2D) coherent electronic spectroscopy measured by phase modulation and phase-sensitive detection, an \emph{incoherent} nonlinear response, due to pairs of photoexcitations produced via linear excitation pathways, contribute to the measured signal as unexpected background [Grégoire et al., J.\ Chem.\ Phys. \textbf{147}, 114201 (… ▽ More We have previously demonstrated that in the context of two-dimensional (2D) coherent electronic spectroscopy measured by phase modulation and phase-sensitive detection, an \emph{incoherent} nonlinear response, due to pairs of photoexcitations produced via linear excitation pathways, contribute to the measured signal as unexpected background [Grégoire et al., J.\ Chem.\ Phys. \textbf{147}, 114201 (2017)]. Here, we simulate the effect of such incoherent population mixing in the photocurrent signal collected from a GaAs solar cell by acting externally on the transimpedance amplifier circuit used for phase-sensitive detection, and we identify an effective strategy to recognize the presence of incoherent population mixing in 2D data. While we find that incoherent mixing is reflected by cross-talk between the linear amplitude at the two time-delay variables in the four-pulse excitation sequence, we do not observe any strict phase correlations between the coherent and incoherent contributions, as expected from modelling of a simple system. △ Less

Submitted 19 October, 2022; v1 submitted 18 August, 2022; originally announced August 2022.

Comments: Resubmitted to the Journal of Chemical Physics

Journal ref: J. Chem. Phys. 157, 204202 (2022)

Crosswell seismic tomographic inversion using NSGA II

Authors: Arthur Anthony da Cunha Romão E Silva, Francisco Márcio Barboza

Abstract: In the present paper, the solution of the seismic data inversion problem through multi-objective optimization with NSGA II is addressed. The seismic inversion consists of estimating the slowness of rocks in the subsurface from the travel times of the waves through the transmitters and receivers of the seismic waves. The inversion process uses the multi-objective optimization technique, in which it… ▽ More In the present paper, the solution of the seismic data inversion problem through multi-objective optimization with NSGA II is addressed. The seismic inversion consists of estimating the slowness of rocks in the subsurface from the travel times of the waves through the transmitters and receivers of the seismic waves. The inversion process uses the multi-objective optimization technique, in which it is necessary to estimate the trade-off between the misfit functional and the stabilizing constraint. The constraint used was the classic first-order Tikhonov. A synthetic model of inclined layers was chosen. The results obtained were acceptable. Based on the graph of the cumulative errors related to the solution, it was estimated correctly, that is, the optimization method used was effective to obtain acceptable results, in addition to the constraint solving the instability problem of the inverse problem treated. Another important result was the achievement of a convergence curve on the Pareto frontier, an important result for future research. △ Less

Submitted 1 August, 2022; originally announced August 2022.

Comments: 14 pages, 12 figures

Mitigation of the Turbulence within an Arteriovenous Fistula with a Stent Implantation

Authors: Sanjiv Gunasekera, Tracie Barber, Olivia Ng, Shannon Thomas, Ramon Varcoe, Charitha de Silva

Abstract: The transitional flow which initiates within the junction (anastomosis) of an arteriovenous fistula (AVF) is known to be a contributing factor in the onset of vascular disease. A novel treatment method involving the implantation of a flexible stent across the anastomosis has enabled the retention of a large proportion of functioning AVFs, despite the propensity for stent malapposition to occur at… ▽ More The transitional flow which initiates within the junction (anastomosis) of an arteriovenous fistula (AVF) is known to be a contributing factor in the onset of vascular disease. A novel treatment method involving the implantation of a flexible stent across the anastomosis has enabled the retention of a large proportion of functioning AVFs, despite the propensity for stent malapposition to occur at the sharp inner curve of the anastomosis. Large Eddy Simulations (LES) of a patient-specific AVF with and without the presence of a stent captured oscillatory flow behaviour emanating from the interface of the two inlet flows in the stent-absent case, however, these oscillatory features were subdued in the stented case. The stent-absent case generally had higher Turbulent Kinetic Energy (TKE) in the anastomosis which led to larger cycle-to-cycle variations in wall shear stress (WSS). The significantly lower TKE generated at the heel of the stented AVF was contained within the malapposed stent, thereby resulting in lower WSS fluctuations. However, a slight increase in turbulence downstream of the malapposed stent edge was noted. This detailed study reveals a significant decrease in turbulence within the AVF in the presence of the stent, thereby, providing a level of understanding underpinning the success of the treatment strategy from a fluid dynamic perspective. △ Less

Submitted 11 December, 2022; v1 submitted 31 July, 2022; originally announced August 2022.

Journal ref: Physical Review Fluids, 7 (2022)

Comparison of theoretical approaches for epidemic processes with waning immunity in complex networks

Authors: José Carlos M. Silva, Diogo H. Silva, Francisco A. Rodrigues, Silvio C. Ferreira

Abstract: The role of waning immunity in basic epidemic models on networks has been undervalued while being noticeable fundamental for real epidemic outbreaks. One central question is which mean-field approach is more accurate in describing the epidemic dynamics. We tackled this problem considering the susceptible-infected-recovered-susceptible (SIRS) epidemic model on networks. Two pairwise mean-field theo… ▽ More The role of waning immunity in basic epidemic models on networks has been undervalued while being noticeable fundamental for real epidemic outbreaks. One central question is which mean-field approach is more accurate in describing the epidemic dynamics. We tackled this problem considering the susceptible-infected-recovered-susceptible (SIRS) epidemic model on networks. Two pairwise mean-field theories, one based on recurrent dynamical message-passing (rDMP) and the other on the pair quenched mean-field theory (PQMF), are compared with extensive stochastic simulations on large networks of different levels of heterogeneity. For waning immunity times longer than or comparable with the recovering time, rDMP outperforms PQMF theory on power-law networks with degree distribution $P(k) \sim k^{-γ}$. In particular, for $γ> 3$, the epidemic threshold observed in simulations is finite, in qualitative agreement with rDMP, while PQMF leads to an asymptotically null threshold. The critical epidemic prevalence for $γ> 3$ is localized in a finite set of vertices in the case of the PQMF theory. In contrast, the localization happens in a subextensive fraction of the network in rDMP theory. Simulations, however, indicate that localization patterns of the actual epidemic lay between the two mean-field theories, and improved theoretical approaches are necessary to understanding the SIRS dynamics. △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: 10 pages, 4 figures

Two-path interference in the resonance-enhanced few-photon ionization of atoms

Authors: B. P. Acharya, S. Dubey, K. L. Romans, A. H. N. C. De Silva, K. Foster, O. Russ, K. Bartschat, N. Douguet, D. Fischer

Abstract: We investigate the resonance-enhanced few-photon ionization of atomic lithium by linearly polarized light whose frequency is tuned near the 2s-2p transition. Considering the direction of light polarization orthogonal to the quantization axis, the process can be viewed as an atomic "double-slit experiment" where the 2p states with magnetic quantum numbers m_l=+-1 act as the slits. In our experiment… ▽ More We investigate the resonance-enhanced few-photon ionization of atomic lithium by linearly polarized light whose frequency is tuned near the 2s-2p transition. Considering the direction of light polarization orthogonal to the quantization axis, the process can be viewed as an atomic "double-slit experiment" where the 2p states with magnetic quantum numbers m_l=+-1 act as the slits. In our experiment, we can virtually close one of the two slits by preparing lithium in one of the two circularly polarized 2p states before subjecting it to the ionizing radiation. This allows us to extract the interference term between the two pathways and obtain complex phase information on the final state. The experimental results show very good agreement with numerical solutions of the time-dependent Schroedinger equation. The validity of the two-slit model is also analyzed theoretically using a time-dependent perturbative approach. △ Less

Submitted 28 June, 2022; v1 submitted 16 April, 2022; originally announced April 2022.

Modeling of the nonlinear flame response of a Bunsen-type flame via multi-layer perceptron

Authors: Nilam Tathawadekar, Nguyen Anh Khoa Doan, Camilo F. Silva, Nils Thuerey

Abstract: This paper demonstrates the ability of neural networks to reliably learn the nonlinear flame response of a laminar premixed flame, while carrying out only one unsteady CFD simulation. The system is excited with a broadband, low-pass filtered velocity signal that exhibits a uniform distribution of amplitudes within a predetermined range. The obtained time series of flow velocity upstream of the fla… ▽ More This paper demonstrates the ability of neural networks to reliably learn the nonlinear flame response of a laminar premixed flame, while carrying out only one unsteady CFD simulation. The system is excited with a broadband, low-pass filtered velocity signal that exhibits a uniform distribution of amplitudes within a predetermined range. The obtained time series of flow velocity upstream of the flame and heat release rate fluctuations are used to train the nonlinear model using a multi-layer perceptron. Several models with varying hyperparameters are trained and the dropout strategy is used as regularizer to avoid overfitting. The best performing model is subsequently used to compute the flame describing function (FDF) using mono-frequent excitations. In addition to accurately predicting the FDF, the trained neural network model also captures the presence of higher harmonics in the flame response. As a result, when coupled with an acoustic solver, the obtained neural network model is better suited than a classical FDF model to predict limit cycle oscillations characterized by more than one frequency. The latter is demonstrated in the final part of the present study. We show that the RMS value of the predicted acoustic oscillations together with the associated dominant frequencies are in excellent agreement with CFD reference data. △ Less

Submitted 11 April, 2022; originally announced April 2022.

Journal ref: Proceedings of the Combustion Institute, 38(4), 6261-6269 (2021)

A Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics

Authors: J. Aalbers, K. Abe, V. Aerne, F. Agostini, S. Ahmed Maouloud, D. S. Akerib, D. Yu. Akimov, J. Akshat, A. K. Al Musalhi, F. Alder, S. K. Alsum, L. Althueser, C. S. Amarasinghe, F. D. Amaro, A. Ames, T. J. Anderson, B. Andrieu, N. Angelides, E. Angelino, J. Angevaare, V. C. Antochi, D. Antón Martin, B. Antunovic, E. Aprile, H. M. Araújo , et al. (572 additional authors not shown)

Abstract: The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neut… ▽ More The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neutrinos through neutrinoless double-beta decay and through a variety of astrophysical sources. A next-generation xenon-based detector will therefore be a true multi-purpose observatory to significantly advance particle physics, nuclear physics, astrophysics, solar physics, and cosmology. This review article presents the science cases for such a detector. △ Less

Submitted 4 March, 2022; originally announced March 2022.

Comments: 77 pages, 40 figures, 1262 references

Report number: INT-PUB-22-003

Journal ref: J. Phys. G: Nucl. Part. Phys. 50 (2023) 013001