-
Orders-of-magnitude reduction in photonic mode volume by nano-sculpting
Authors:
Rasmus E. Christiansen,
Jesper Mørk,
Ole Sigmund
Abstract:
Three-dimensionally sculpted dielectric nanostructures supporting material(air) confined optical modes with single-emitter mode volumes three(four) orders of magnitude below the diffraction limit, $V_{\textbf{r}_0} \approx 0.0004 \left[λ/(2 n)\right]^3 \left( V_{\textbf{r}_0} \approx 0.00003 \left[λ/2\right]^3\right)$, are discovered using topology optimization. Encapsulating the nanostructure by…
▽ More
Three-dimensionally sculpted dielectric nanostructures supporting material(air) confined optical modes with single-emitter mode volumes three(four) orders of magnitude below the diffraction limit, $V_{\textbf{r}_0} \approx 0.0004 \left[λ/(2 n)\right]^3 \left( V_{\textbf{r}_0} \approx 0.00003 \left[λ/2\right]^3\right)$, are discovered using topology optimization. Encapsulating the nanostructure by ellipsoidal shells enables seemingly unbounded mode quality factor enhancement ($Q > 10^8$ demonstrated numerically) leading to Purcell enhancement above $10^{11}$. It is studied how $V_{\textbf{r}_0}$ and $Q$ depend on the choice of material, device volume, minimum feature size and number of shells.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Omnidirectional gradient force optical trap** in dielectric nanocavities by inverse design
Authors:
Beñat Martinez de Aguirre Jokisch,
Benjamin Falkenberg Gøtzsche,
Philip Trøst Kristensen,
Martijn Wubs,
Ole Sigmund,
Rasmus Ellebæk Christiansen
Abstract:
Optical trap** enables precise control of individual particles of different sizes, such as atoms, molecules, or nanospheres. Optical tweezers provide free-space omnidirectional optical trap** of objects in laboratories around the world. As an alternative to standard macroscopic setups based on lenses, which are inherently bound by the diffraction limit, plasmonic and photonic nanostructures pr…
▽ More
Optical trap** enables precise control of individual particles of different sizes, such as atoms, molecules, or nanospheres. Optical tweezers provide free-space omnidirectional optical trap** of objects in laboratories around the world. As an alternative to standard macroscopic setups based on lenses, which are inherently bound by the diffraction limit, plasmonic and photonic nanostructures promise trap** by near-field optical effects on the extreme nanoscale. However, the practical design of lossless waveguide-coupled nanostructures capable of trap** deeply sub-wavelength particles in all spatial directions using the gradient force has until now proven insurmountable. In this work, we demonstrate an omnidirectional optical trap realized by inverse-designing fabrication-ready integrated dielectric nanocavities. The sub-wavelength optical trap is designed to rely solely on the gradient force and is thus particle-size agnostic. In particular, we show how a nanometer-sized trapped particle experiences a force strong enough to overcome room-temperature thermal fluctuations. Furthermore, through the robust inverse design framework, we tailor manufacturable devices operating at near-infrared and optical frequencies. Our results open a new regime of levitated optical trap** by achieving a deep trap** potential capable of trap** single sub-wavelength particles in all directions using optical gradient forces. We anticipate potentially groundbreaking applications of the optimized optical trap** system for biomolecular analysis in aqueous environments, levitated cavity-optomechanics, and cold atom physics, constituting an important step towards realizing integrated bio-nanophotonics and mesoscopic quantum mechanical experiments.
△ Less
Submitted 30 April, 2024; v1 submitted 23 April, 2024;
originally announced April 2024.
-
Nanometer-scale photon confinement in topology-optimized dielectric cavities
Authors:
Marcus Albrechtsen,
Babak Vosoughi Lahijani,
Rasmus Ellebæk Christiansen,
Vy Thi Hoang Nguyen,
Laura Nevenka Casses,
Søren Engelberth Hansen,
Nicolas Stenger,
Ole Sigmund,
Henri Jansen,
Jesper Mørk,
Søren Stobbe
Abstract:
Nanotechnology enables in principle a precise map** from design to device but relied so far on human intuition and simple optimizations. In nanophotonics, a central question is how to make devices in which the light-matter interaction strength is limited only by materials and nanofabrication. Here, we integrate measured fabrication constraints into topology optimization, aiming for the strongest…
▽ More
Nanotechnology enables in principle a precise map** from design to device but relied so far on human intuition and simple optimizations. In nanophotonics, a central question is how to make devices in which the light-matter interaction strength is limited only by materials and nanofabrication. Here, we integrate measured fabrication constraints into topology optimization, aiming for the strongest possible light-matter interaction in a compact silicon membrane, demonstrating an unprecedented photonic nanocavity with a mode volume of $V\sim3\times10^{-4}\,λ^3$, quality factor $Q\sim1100$, and footprint $4\,λ^2$ for telecom photons with a $λ\sim 1550$ nm wavelength. We fabricate the cavity, which confines photons inside 8 nm silicon bridges and use near-field optical measurements to perform the first experimental demonstration of photon confinement to a single hotspot well below the diffraction limit in dielectrics.
△ Less
Submitted 1 March, 2022; v1 submitted 3 August, 2021;
originally announced August 2021.
-
Buckling and yield strength estimation of architected materials under arbitrary loads
Authors:
Morten N. Andersen,
Yiqiang Wang,
Fengwen Wang,
Ole Sigmund
Abstract:
Buckling strength estimation of architected materials has mainly been restricted to load cases oriented along symmetry axes. However, realistic load scenarios normally exhibit more general stress distributions. In this paper we propose a simple yet accurate method to estimate the buckling strength of stretch-dominated lattice structures based on individual member analysis. As an integral part of t…
▽ More
Buckling strength estimation of architected materials has mainly been restricted to load cases oriented along symmetry axes. However, realistic load scenarios normally exhibit more general stress distributions. In this paper we propose a simple yet accurate method to estimate the buckling strength of stretch-dominated lattice structures based on individual member analysis. As an integral part of the method, the yield strength is also determined. This simplified model is verified by rigorous numerical analysis. In particular, we efficiently compute the complete buckling strength surfaces of an orthotropic bulk modulus optimal plate lattice structure and isotropic stiffness optimal plate and truss lattice structures subjected to rotated uni-axial loads, where the ratio between the highest and lowest buckling strength is found to be 1.77, 2.11 and 2.41, respectively. For comparison, we also provide their yield strength surfaces, where the corresponding ratios are 1.84, 1.16 and 1.79. Furthermore, we use the knowledge gained from the simplified model to create a new configuration of the isotropic plate lattice structure with a more isotropic buckling strength surface and buckling strength ratio of 1.24, without deterioration of the stiffness or yield strength. The proposed method provides a valuable tool to quickly estimate the microstructural buckling strength of stretch-dominated lattice structures, especially for applications where the stress state is non-uniform such as infill in additive manufacturing.
△ Less
Submitted 13 May, 2021;
originally announced May 2021.
-
Ultra-coherent nanomechanical resonators based on inverse design
Authors:
Dennis Høj,
Fengwen Wang,
Wenjun Gao,
Ulrich Busk Hoff,
Ole Sigmund,
Ulrik Lund Andersen
Abstract:
Engineered micro- and nanomechanical resonators with ultra-low dissipation constitute the ideal systems for applications ranging from high-precision sensing such as magnetic resonance force microscopy, to quantum transduction between disparate quantum systems. Traditionally, the improvement of the resonator's performance - often quantified by its Qf product (where Q is quality factor and f is freq…
▽ More
Engineered micro- and nanomechanical resonators with ultra-low dissipation constitute the ideal systems for applications ranging from high-precision sensing such as magnetic resonance force microscopy, to quantum transduction between disparate quantum systems. Traditionally, the improvement of the resonator's performance - often quantified by its Qf product (where Q is quality factor and f is frequency) - through nanomechanical engineering such as dissipation dilution and strain engineering, has been driven by human intuition and insight. Such an approach is inefficient and leaves aside a plethora of unexplored mechanical designs that potentially achieve better performance. Here, we use a computer-aided inverse design approach known as topology optimization to structurally design mechanical resonators with optimal performance of the fundamental mechanical mode. Using the outcomes of this approach, we fabricate and characterize ultra-coherent nanomechanical resonators with record-high Qf products, entering a quantum coherent regime where coherent oscillations are observed at room temperature. Further refinements to the model describing the mechanical system are likely to improve the Qf product even more. The proposed approach - which can be also used to improve phononic crystal and coupled-mode resonators - opens up a new paradigm for designing ultra-coherent micro- and nanomechanical resonators for cutting-edge technology, enabling e.g. novel experiments in fundamental physics (e.g. search for dark matter and quantum nature of gravity) and extreme sensing of magnetic fields, electric fields and mass with unprecedented sensitivities at room temperature.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Compact 200 line MATLAB code for inverse design in photonics by topology optimization: tutorial
Authors:
Rasmus E. Christiansen,
Ole Sigmund
Abstract:
We provide a compact 200 line MATLAB code demonstrating how topology optimization (TopOpt) as an inverse design tool may be used in photonics, targeting the design of two-dimensional dielectric metalenses and a metallic reflector as examples. The physics model is solved using the finite element method, and the code utilizes MATLAB's fmincon algorithm to solve the optimization problem. In addition…
▽ More
We provide a compact 200 line MATLAB code demonstrating how topology optimization (TopOpt) as an inverse design tool may be used in photonics, targeting the design of two-dimensional dielectric metalenses and a metallic reflector as examples. The physics model is solved using the finite element method, and the code utilizes MATLAB's fmincon algorithm to solve the optimization problem. In addition to presenting the code itself, we briefly discuss a number of extensions and provide the code required to implement some of these. Finally, we demonstrate the superiority of using a gradient-based method compared to a genetic-algorithm-based method (using MATLAB's ga algorithm) for solving inverse design problems in photonics. The MATLAB software is freely available in the paper and may be downloaded from https://www.topopt.mek.dtu.dk.
△ Less
Submitted 23 February, 2021; v1 submitted 23 August, 2020;
originally announced September 2020.
-
Inverse design in photonics by topology optimization: tutorial
Authors:
Rasmus E. Christiansen,
Ole Sigmund
Abstract:
Topology optimization methods for inverse design of nano-photonic systems have recently become extremely popular and are presented in various forms and under various names. Approaches comprise gradient and non-gradient based algorithms combined with more or less systematic ways to improve convergence, discreteness of solutions and satisfaction of manufacturing constraints. We here provide a tutori…
▽ More
Topology optimization methods for inverse design of nano-photonic systems have recently become extremely popular and are presented in various forms and under various names. Approaches comprise gradient and non-gradient based algorithms combined with more or less systematic ways to improve convergence, discreteness of solutions and satisfaction of manufacturing constraints. We here provide a tutorial for the systematic and efficient design of nano-photonic structures by Topology Optimization (TopOpt). The implementation is based on the advanced and systematic approaches developed in TopOpt for structural optimization during the last three decades. The tutorial presents a step-by-step guide for deriving the continuous constrained optimization problem forming the foundation of the Topology Optimization method, using a cylindrical metalens design problem as an example. It demonstrates the effect and necessity of applying a number of auxiliary tools in the design process in order to ensure good numerical modelling practice and to achieve physically realisable designs. Application examples also include an optical demultiplexer.
△ Less
Submitted 23 February, 2021; v1 submitted 23 August, 2020;
originally announced August 2020.
-
Topology Optimization of Two Fluid Heat Exchangers
Authors:
Lukas Christan Høghøj,
Daniel Ruberg Nørhave,
Joe Alexandersen,
Ole Sigmund,
Casper Schousboe Andreasen
Abstract:
A method for density-based topology optimization of heat exchangers with two fluids is proposed. The goal of the optimization process is to maximize the heat transfer from one fluid to the other, under maximum pressure drop constraints for each of the fluid flows. A single design variable is used to describe the physical fields. The solid interface and the fluid domains are generated using an eros…
▽ More
A method for density-based topology optimization of heat exchangers with two fluids is proposed. The goal of the optimization process is to maximize the heat transfer from one fluid to the other, under maximum pressure drop constraints for each of the fluid flows. A single design variable is used to describe the physical fields. The solid interface and the fluid domains are generated using an erosion-dilation based identification technique, which guarantees well-separated fluids, as well as a minimum wall thickness between them. Under the assumption of laminar steady flow, the two fluids are modelled separately, but in the entire computational domain using the Brinkman penalization technique for ensuring negligible velocities outside of the respective fluid subdomains. The heat transfer is modelled using the convection-diffusion equation, where the convection is driven by both fluid flows. A stabilized finite element discretization is used to solve the governing equations. Results are presented for two different problems: a two-dimensional example illustrating and verifying the methodology; and a three-dimensional example inspired by shell-and-tube heat exchangers. The optimized designs for both cases show an improved heat transfer compared to the baseline designs. For the shell-and-tube case, the full freedom topology optimization approach is shown to yield performance improvements of up to 113% under the same pressure drop.
△ Less
Submitted 6 July, 2020; v1 submitted 3 July, 2020;
originally announced July 2020.
-
Strongly enhanced upconversion in trivalent erbium ions by tailored gold nanostructures: toward high-efficient silicon-based photovoltaics
Authors:
Jeppe Christiansen,
Joakim Vester-Petersen,
Søren Roesgaard,
Søren H. Møller,
Rasmus E. Christiansen,
Ole Sigmund,
Søren P. Madsen,
Peter Balling,
Brian Julsgaard
Abstract:
Upconversion of sub-band-gap photons constitutes a promising way for improving the efficiency of silicon-based solar cells beyond the Shockley-Queisser limit. 1500 to 980 nm upconversion by trivalent erbium ions is well-suited for this purpose, but the small absorption cross section hinders real-world applications. We employ tailored gold nanostructures to vastly improve the upconversion efficienc…
▽ More
Upconversion of sub-band-gap photons constitutes a promising way for improving the efficiency of silicon-based solar cells beyond the Shockley-Queisser limit. 1500 to 980 nm upconversion by trivalent erbium ions is well-suited for this purpose, but the small absorption cross section hinders real-world applications. We employ tailored gold nanostructures to vastly improve the upconversion efficiency in erbium-doped TiO$_2$ thin films. The nanostructures are found using topology optimization and parameter optimization and fabricated by electron beam lithography. In qualitative agreement with a theoretical model, the samples show substantial electric-field enhancements inside the upconverting films for excitation at 1500 nm for both s- and p-polarization under a wide range of incidence angles and excitation intensities. An unprecedented upconversion enhancement of 913(51) is observed at an excitation intensity of 1.7 Wcm$^{-2}$. We derive a semi-empirical expression for the photonically enhanced upconversion efficiency, valid for all excitation intensities. This allows us to determine the upconversion properties needed to achieve significant improvements in real-world solar-cell devices through photonic-enhanced upconversion.
△ Less
Submitted 17 November, 2019;
originally announced November 2019.
-
Inverse Design of Nanoparticles for Enhanced Raman Scattering
Authors:
Rasmus E. Christiansen,
Jérôme Michon,
Mohammed Benzaouia,
Ole Sigmund,
Steven G. Johnson
Abstract:
We show that topology optimization (TO) of metallic resonators can lead to $\sim 10^2\times$ improvement in surface-enhanced Raman scattering (SERS) efficiency compared to traditional resonant structures such as bowtie antennas. TO inverse design leads to surprising structures very different from conventional designs, which simultaneously optimize focusing of the incident wave and emission from th…
▽ More
We show that topology optimization (TO) of metallic resonators can lead to $\sim 10^2\times$ improvement in surface-enhanced Raman scattering (SERS) efficiency compared to traditional resonant structures such as bowtie antennas. TO inverse design leads to surprising structures very different from conventional designs, which simultaneously optimize focusing of the incident wave and emission from the Raman dipole. We consider isolated metallic particles as well as more complicated configurations such as periodic surfaces or resonators coupled to dielectric waveguides, and the benefits of TO are even greater in the latter case. Our results are motivated by recent rigorous upper bounds to Raman scattering enhancement, and shed light on the extent to which these bounds are achievable.
△ Less
Submitted 19 November, 2019; v1 submitted 12 November, 2019;
originally announced November 2019.
-
Designing Photonic Topological Insulators with Quantum-Spin-Hall Edge States using Topology Optimization
Authors:
Rasmus E. Christiansen,
Fengwen Wang,
Ole Sigmund,
Søren Stobbe
Abstract:
Designing photonic topological insulators is highly non-trivial because it requires inversion of band symmetries around the band gap, which was so far done using intuition combined with meticulous trial and error. Here we take a completely different approach: we consider the design of photonic topological insulators as an inverse design problem and use topology optimization to maximize the transmi…
▽ More
Designing photonic topological insulators is highly non-trivial because it requires inversion of band symmetries around the band gap, which was so far done using intuition combined with meticulous trial and error. Here we take a completely different approach: we consider the design of photonic topological insulators as an inverse design problem and use topology optimization to maximize the transmission through an edge mode with a sharp bend. Two design domains composed of two different, but initially identical, C$_\text{6v}$-symmetric unit cells define the geometrical design problem. Remarkably, the optimization results in a photonic topological insulator reminiscent of the shrink-and-grow approach to quantum-spin-Hall photonic topological insulators but with notable differences in the topology of the crystal as well as qualitatively different band structures and with significantly improved performance as gauged by the band-gap sizes, which are at least 50 \% larger than previous designs. Furthermore, we find a directional beta factor exceeding 99 \%, and very low losses for sharp bends. Our approach allows for the introduction of fabrication limitations by design and opens an avenue towards designing PTIs with hitherto unexplored symmetry constraints.
△ Less
Submitted 17 April, 2019;
originally announced April 2019.
-
A "poor man's" approach for high-resolution three-dimensional topology optimization of natural convection problems
Authors:
Nicolo Pollini,
Ole Sigmund,
Casper Schousboe Andreasen,
Joe Alexandersen
Abstract:
This paper treats topology optimization of natural convection problems. A simplified model is suggested to describe the flow of an incompressible fluid in steady state conditions, similar to Darcy's law for fluid flow in porous media. The equations for the fluid flow are coupled to the thermal convection-diffusion equation through the Boussinesq approximation. The coupled non-linear system of equa…
▽ More
This paper treats topology optimization of natural convection problems. A simplified model is suggested to describe the flow of an incompressible fluid in steady state conditions, similar to Darcy's law for fluid flow in porous media. The equations for the fluid flow are coupled to the thermal convection-diffusion equation through the Boussinesq approximation. The coupled non-linear system of equations is discretized with stabilized finite elements and solved in a parallel framework that allows for the optimization of high resolution three-dimensional problems. A density-based topology optimization approach is used, where a two-material interpolation scheme is applied to both the permeability and conductivity of the distributed material. Due to the simplified model, the proposed methodology allows for a significant reduction of the computational effort required in the optimization. At the same time, it is significantly more accurate than even simpler models that rely on convection boundary conditions based on Newton's law of cooling. The methodology discussed herein is applied to the optimization-based design of three-dimensional heat sinks. The final designs are formally compared with results of previous work obtained from solving the full set of Navier-Stokes equations. The results are compared in terms of performance of the optimized designs and computational cost. The computational time is shown to be decreased to around 5-20% in terms of core-hours, allowing for the possibility of generating an optimized design during the workday on a small computational cluster and overnight on a high-end desktop.
△ Less
Submitted 30 March, 2019;
originally announced April 2019.
-
Maximizing the quality factor to mode volume ratio for ultra-small photonic crystal cavities
Authors:
Fengwen Wang,
Rasmus Ellebæk Christiansen,
Yi Yu,
Jesper Mørk,
Ole Sigmund
Abstract:
Small manufacturing-tolerant photonic crystal cavities are systematically designed using topology optimization to enhance the ratio between quality factor and mode volume, Q/V. For relaxed manufacturing tolerance, a cavity with bow-tie shape is obtained which confines light beyond the diffraction limit into a deep-subwavelength volume. Imposition of a small manufacturing tolerance still results in…
▽ More
Small manufacturing-tolerant photonic crystal cavities are systematically designed using topology optimization to enhance the ratio between quality factor and mode volume, Q/V. For relaxed manufacturing tolerance, a cavity with bow-tie shape is obtained which confines light beyond the diffraction limit into a deep-subwavelength volume. Imposition of a small manufacturing tolerance still results in efficient designs, however, with diffraction-limited confinement. Inspired by numerical results, an elliptic ring grating cavity concept is extracted via geometric fitting. Numerical evaluations demonstrate that for small sizes, topology-optimized cavities enhance the Q/V-ratio by up to two orders of magnitude relative to standard L1 cavities and more than one order of magnitude relative to shape-optimized L1 cavities. An increase in cavity size can enhance the Q/V-ratio by an increase of the Q-factor without significant increase of V. Comparison between optimized and reference cavities illustrates that significant reduction of V requires big topological changes in the cavity.
△ Less
Submitted 18 December, 2018; v1 submitted 4 October, 2018;
originally announced October 2018.
-
Simple single-scale microstructures based on optimal rank-3 laminates
Authors:
Erik Träff,
Ole Sigmund,
Jeroen Groen
Abstract:
With the goal of identifying optimal elastic single-scale microstructures for multiple loading situations, the paper shows that qualified starting guesses, based on knowledge of optimal rank-3 laminates, significantly improves chances of convergence to near optimal designs. Rank-3 laminates, optimal for a given set of anisotropic loading conditions, are approximated on a single scale using a simpl…
▽ More
With the goal of identifying optimal elastic single-scale microstructures for multiple loading situations, the paper shows that qualified starting guesses, based on knowledge of optimal rank-3 laminates, significantly improves chances of convergence to near optimal designs. Rank-3 laminates, optimal for a given set of anisotropic loading conditions, are approximated on a single scale using a simple map** approach. We demonstrate that these mapped microstructures perform relatively close to theoretical energy bounds. Microstructures with performance even closer to the bounds can be obtained by using the approximated rank-3 structures in a further step as starting guesses for inverse homogenization problems. Due to the non-convex nature of inverse homogenization problems, the starting guesses based on rank-3 laminates outperform classical starting guesses with homogeneous or random material distributions. Furthermore, the obtained single-scale microstructures are relatively simple, which enhances manufacturability. Results, obtained for a wide range of loading cases, indicate that microstructures with performance within 5-8% of the theoretical optima can be guarantied, as long as feature sizes are not limited by minimium size constraints.
△ Less
Submitted 11 September, 2018;
originally announced September 2018.
-
Benchmarking five numerical simulation techniques for computing resonance wavelengths and quality factors in photonic crystal membrane line defect cavities
Authors:
Jakob Rosenkrantz de Lasson,
Lars Hagedorn Frandsen,
Philipp Gutsche,
Sven Burger,
Oleksiy S. Kim,
Olav Breinbjerg,
Aliaksandra Ivinskaya,
Fengwen Wang,
Ole Sigmund,
Teppo Häyrynen,
Andrei V. Lavrinenko,
Jesper Mørk,
Niels Gregersen
Abstract:
We present numerical studies of two photonic crystal membrane microcavities, a short line-defect cavity with relatively low quality ($Q$) factor and a longer cavity with high $Q$. We use five state-of-the-art numerical simulation techniques to compute the cavity $Q$ factor and the resonance wavelength $λ$ for the fundamental cavity mode in both structures. For each method, the relevant computation…
▽ More
We present numerical studies of two photonic crystal membrane microcavities, a short line-defect cavity with relatively low quality ($Q$) factor and a longer cavity with high $Q$. We use five state-of-the-art numerical simulation techniques to compute the cavity $Q$ factor and the resonance wavelength $λ$ for the fundamental cavity mode in both structures. For each method, the relevant computational parameters are systematically varied to estimate the computational uncertainty. We show that some methods are more suitable than others for treating these challenging geometries.
△ Less
Submitted 20 April, 2018; v1 submitted 29 September, 2017;
originally announced October 2017.
-
Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection
Authors:
Joe Alexandersen,
Ole Sigmund,
Niels Aage
Abstract:
This work presents the application of density-based topology optimisation to the design of three-dimensional heat sinks cooled by natural convection. The governing equations are the steady-state incompressible Navier-Stokes equations coupled to the thermal convection-diffusion equation through the Bousinessq approximation. The fully coupled non-linear multiphysics system is solved using stabilised…
▽ More
This work presents the application of density-based topology optimisation to the design of three-dimensional heat sinks cooled by natural convection. The governing equations are the steady-state incompressible Navier-Stokes equations coupled to the thermal convection-diffusion equation through the Bousinessq approximation. The fully coupled non-linear multiphysics system is solved using stabilised trilinear equal-order finite elements in a parallel framework allowing for the optimisation of large scale problems with order of 40-330 million state degrees of freedom. The flow is assumed to be laminar and several optimised designs are presented for Grashof numbers between $10^3$ and $10^6$. Interestingly, it is observed that the number of branches in the optimised design increases with increasing Grashof numbers, which is opposite to two-dimensional optimised designs.
△ Less
Submitted 19 August, 2015;
originally announced August 2015.
-
Topology optimisation for natural convection problems
Authors:
Joe Alexandersen,
Niels Aage,
Casper Schousboe Andreasen,
Ole Sigmund
Abstract:
This paper demonstrates the application of the density-based topology optimisation approach for the design of heat sinks and micropumps based on natural convection effects. The problems are modelled under the assumptions of steady-state laminar flow using the incompressible Navier-Stokes equations coupled to the convection-diffusion equation through the Boussinesq approximation. In order to facili…
▽ More
This paper demonstrates the application of the density-based topology optimisation approach for the design of heat sinks and micropumps based on natural convection effects. The problems are modelled under the assumptions of steady-state laminar flow using the incompressible Navier-Stokes equations coupled to the convection-diffusion equation through the Boussinesq approximation. In order to facilitate topology optimisation, the Brinkman approach is taken to penalise velocities inside the solid domain and the effective thermal conductivity is interpolated in order to accommodate differences in thermal conductivity of the solid and fluid phases. The governing equations are discretised using stabilised finite elements and topology optimisation is performed for two different problems using discrete adjoint sensitivity analysis. The study shows that topology optimisation is a viable approach for designing heat sink geometries cooled by natural convection and micropumps powered by natural convection.
△ Less
Submitted 9 August, 2014;
originally announced August 2014.
-
A review of the scattering parameter extraction method with clarification of ambiguity issues in relation to metamaterial homogenization
Authors:
S. Arslanagić,
T. V. Hansen,
N. A. Mortensen,
A. H. Gregersen,
O. Sigmund,
R. W. Ziolkowski,
O. Breinbjerg
Abstract:
The scattering parameter extraction method of metamaterial homogenization is reviewed to show that the only ambiguity is the one related to the choice of the branch of the complex logarithmic function (or the complex inverse cosine function), whereas it has no ambiguity for the sign of the wave number and intrinsic impedance. While the method indeed yields two signs of the intrinsic impedance, and…
▽ More
The scattering parameter extraction method of metamaterial homogenization is reviewed to show that the only ambiguity is the one related to the choice of the branch of the complex logarithmic function (or the complex inverse cosine function), whereas it has no ambiguity for the sign of the wave number and intrinsic impedance. While the method indeed yields two signs of the intrinsic impedance, and thus the wave number, the signs are dependent, and moreover, both sign combinations lead to the same permittivity and permeability, and are thus permissible. This observation is in distinct contrast to a number of statements in the literature where the correct sign of the intrinsic impedance and wave number, resulting from the scattering parameter method, is chosen by imposing additional physical requirements such as passivity. The scattering parameter method is reviewed through an investigation of a uniform plane wave normally incident on a planar slab in free-space, and the severity of the branch ambiguity is illustrated through simulations of a known metamaterial realization. Several approaches for proper branch selection are reviewed and their suitability to metamaterial samples is discussed.
△ Less
Submitted 21 June, 2012;
originally announced June 2012.
-
Fundamental limitations to gain enhancement in periodic media and waveguides
Authors:
Jure Grgić,
Johan Raunkjær Ott,
Fengwen Wang,
Ole Sigmund,
Antti-Pekka Jauho,
Jesper Mørk,
N. Asger Mortensen
Abstract:
A common strategy to compensate for losses in optical nanostructures is to add gain material in the system. By exploiting slow-light effects it is expected that the gain may be enhanced beyond its bulk value. Here we show that this route cannot be followed uncritically: inclusion of gain inevitably modifies the underlying dispersion law, and thereby may degrade the slow-light properties underlying…
▽ More
A common strategy to compensate for losses in optical nanostructures is to add gain material in the system. By exploiting slow-light effects it is expected that the gain may be enhanced beyond its bulk value. Here we show that this route cannot be followed uncritically: inclusion of gain inevitably modifies the underlying dispersion law, and thereby may degrade the slow-light properties underlying the device operation and the anticipated gain enhancement itself. This degradation is generic; we demonstrate it for three different systems of current interest (coupled resonator optical waveguides, Bragg stacks, and photonic crystal waveguides). Nevertheless, a small amount of added gain may be beneficial.
△ Less
Submitted 7 May, 2012; v1 submitted 22 February, 2012;
originally announced February 2012.