-
A model for the electric field-driven deformation of a drop or vesicle in strong electrolyte solutions
Authors:
Manman Ma,
Michael R. Booty,
Michael Siegel
Abstract:
A model is constructed to describe the arbitrary deformation of a drop or vesicle that contains and is embedded in an electrolyte solution, where the deformation is caused by an applied electric field. The applied field produces an electrokinetic flow or induced charge electro-osmosis. The model is based on the coupled Poisson-Nernst-Planck and Stokes equations. These are reduced or simplified by…
▽ More
A model is constructed to describe the arbitrary deformation of a drop or vesicle that contains and is embedded in an electrolyte solution, where the deformation is caused by an applied electric field. The applied field produces an electrokinetic flow or induced charge electro-osmosis. The model is based on the coupled Poisson-Nernst-Planck and Stokes equations. These are reduced or simplified by forming the limit of strong electrolytes, for which ion densities are relatively large, together with the limit of thin Debye layers. Debye layers of opposite polarity form on either side of the drop interface or vesicle membrane, together forming an electrical double layer.
Two formulations of the model are given. One utilizes an integral equation for the velocity field on the interface or membrane surface together with a pair of integral equations for the electrostatic potential on the outer faces of the double layer. The other utilizes a form of the stress-balance boundary condition that incorporates the double layer structure into relations between the dependent variables on the layer's outer faces. This constitutes an interfacial boundary condition that drives an otherwise unforced Stokes flow outside the double layer. For both formulations relations derived from the transport of ions in each Debye layer give additional boundary conditions for the potential and ion concentrations outside the double layer.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
Superconducting Nanowire Single-Photon Detector (SNSPD) with 3D-Printed Free-Form Microlenses
Authors:
Yilin Xu,
Artem Kuzmin,
Emanuel Knehr,
Matthias Blaicher,
Konstantin Ilin,
Philipp-Immanuel Dietrich,
Wolfgang Freude,
Michael Siegel,
Christian Koos
Abstract:
We present an approach to increase the effective light-receiving area of superconducting nanowire single-photon detectors (SNSPD) by means of free-form microlenses that are printed in situ on top of the sensitive detector area using high-resolution multi-photon lithography. We demonstrate a detector based on a niobium-nitride (NbN) nanowire with a 4.5 $\mathrm μ$m $\times$ 4.5 $\mathrm μ$m sensiti…
▽ More
We present an approach to increase the effective light-receiving area of superconducting nanowire single-photon detectors (SNSPD) by means of free-form microlenses that are printed in situ on top of the sensitive detector area using high-resolution multi-photon lithography. We demonstrate a detector based on a niobium-nitride (NbN) nanowire with a 4.5 $\mathrm μ$m $\times$ 4.5 $\mathrm μ$m sensitive area, supplemented with a lens of 60 $\mathrm μ$m diameter. For free-space illumination at a wavelength of 1550 nm, the lensed sensor has a 100-fold-increased effective collection area, which leads to strongly enhanced system detection efficiency without the need for long nanowires. Our approach can be readily applied to a wide range of sensor types and effectively overcomes the inherent design conflict between high counting speed due to short sensor reset time, high timing accuracy, and high fabrication yield on the one hand and high collection efficiency through large effective detection areas on the other hand.
△ Less
Submitted 21 June, 2021; v1 submitted 19 April, 2021;
originally announced April 2021.
-
Enhancing the Performance of Superconducting Nanowire-Based Detectors with High-Filling Factor by Using Variable Thickness
Authors:
Reza Baghdadi,
Ekkehart Schmidt,
Saman Jahani,
Ilya Charaev,
Michael G. W. Muller,
Marco Colangelo,
Di Zhu,
Konstantin Ilin,
Alexej D. Semenov,
Zubin Jacob,
Michael Siegel,
Karl K. Berggren
Abstract:
Current crowding at bends of superconducting nanowire single-photon detectors is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of be…
▽ More
Current crowding at bends of superconducting nanowire single-photon detectors is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of bends in comparison to the thickness of straight nanowire sections locally reduces the current density and reduces the suppression of the critical current caused by the current crowding. This allows variable thickness SNSPD to have a higher critical current, an improved detection efficiency, and decreased dark count rate in comparison with a standard uniform thickness SNSPD with an identical geometry and film quality.
△ Less
Submitted 22 October, 2020;
originally announced October 2020.
-
Collapse vs. blow up and global existence in the generalized Constantin-Lax-Majda equation
Authors:
Pavel M. Lushnikov,
Denis A. Silantyev,
Michael Siegel
Abstract:
The question of finite time singularity formation vs. global existence for solutions to the generalized Constantin-Lax-Majda equation is studied, with particular emphasis on the influence of a parameter $a$ which controls the strength of advection. For solutions on the infinite domain we find a new critical value $a_c=0.6890665337007457\ldots$ below which there is finite time singularity formation…
▽ More
The question of finite time singularity formation vs. global existence for solutions to the generalized Constantin-Lax-Majda equation is studied, with particular emphasis on the influence of a parameter $a$ which controls the strength of advection. For solutions on the infinite domain we find a new critical value $a_c=0.6890665337007457\ldots$ below which there is finite time singularity formation % if we write a=a_c=0.6890665337007457\ldots here then \ldots doesn't fit into the line that has a form of self-similar collapse, with the spatial extent of blow-up shrinking to zero. We find a new exact analytical collapsing solution at $a=1/2$ as well as prove the existence of a leading order complex singularity for general values of $a$ in the analytical continuation of the solution from the real spatial coordinate into the complex plane. This singularity controls the leading order behaviour of the collapsing solution. For $a_c<a\leq1$, we find a blow-up solution in which the spatial extent of the blow-up region expands infinitely fast at the singularity time. For $a \gtrsim 1.3$, we find that the solution exists globally with exponential-like growth of the solution amplitude in time. We also consider the case of periodic boundary conditions. We identify collapsing solutions for $a<a_c$ which are similar to the real line case. For $a_c<a\le0.95$, we find new blow-up solutions which are neither expanding nor collapsing. For $ a\ge 1,$ we identify a global existence of solutions.
△ Less
Submitted 22 August, 2021; v1 submitted 2 October, 2020;
originally announced October 2020.
-
Synchronous single-photon detection with self-resetting GHz-gated superconducting NbN nanowires
Authors:
Emanuel Knehr,
Artem Kuzmin,
Steffen Doerner,
Stefan Wuensch,
Konstantin Ilin,
Heidemarie Schmidt,
Michael Siegel
Abstract:
We demonstrate a GHz-gated operation of resonator-coupled superconducting nanowire single-photon detectors suitable for synchronous applications. In comparison with conventional dc-biased nanowire detectors, this method prevents the detector from latching and can suppress dark counts and background noise. Using a gating frequency of 3.8 GHz and a fast, synchronized laser diode, we show that the de…
▽ More
We demonstrate a GHz-gated operation of resonator-coupled superconducting nanowire single-photon detectors suitable for synchronous applications. In comparison with conventional dc-biased nanowire detectors, this method prevents the detector from latching and can suppress dark counts and background noise. Using a gating frequency of 3.8 GHz and a fast, synchronized laser diode, we show that the detector's operation point follows the oscillating current and its detection efficiency depends on the relative frequency and phase of the bias and modulated optical signal. The obtained experimental results are in good agreement with simulations, showing that the duty cycle of a gated detector can be adjusted in a wide range in case of a pronounced saturation of the current-dependent detection efficiency. This operation mode could be suitable for applications such as quantum key distribution and time-of-flight laser ranging.
△ Less
Submitted 16 September, 2020; v1 submitted 30 March, 2020;
originally announced March 2020.
-
Local thermal fluctuations in current-carrying superconducting nanowires
Authors:
Alexej D. Semenov,
Mariia Sidorova,
Mikhail A. Skvortsov,
Artem Kuzmin,
Konstantin Ilin,
Michael Siegel
Abstract:
We analyze the effect of different types of fluctuations in internal electron energy on the rates of dark and photon counts in straight current-carrying superconducting nanowires. Dark counts appear due to thermal fluctuations in statistically independent cells with the effective size of the order of the coherence length; each count corresponds to an escape from the equilibrium state through an ap…
▽ More
We analyze the effect of different types of fluctuations in internal electron energy on the rates of dark and photon counts in straight current-carrying superconducting nanowires. Dark counts appear due to thermal fluctuations in statistically independent cells with the effective size of the order of the coherence length; each count corresponds to an escape from the equilibrium state through an appropriate saddle point. For photon counts, spectral broadening of the deterministic cut off in the spectra of the detection efficiency can be phenomenologically explained by local thermal fluctuations in the electron energy within cells with the same effective volume as for dark counts.
△ Less
Submitted 20 October, 2020; v1 submitted 11 October, 2019;
originally announced October 2019.
-
Nanowire single-photon detectors made of atomic layer-deposited niobium nitride
Authors:
Emanuel Knehr,
Artem Kuzmin,
Mario Ziegler,
Steffen Doerner,
Konstantin Ilin,
Michael Siegel,
Ronny Stolz,
Heidemarie Schmidt
Abstract:
We demonstrate and characterize first superconducting nanowire single-photon detectors (SNSPDs) made from atomic layer-deposited (ALD) NbN layers. To assess the suitability of these films as a detector material, transport properties of bare films and bridges of different dimensions and thicknesses are investigated. Similar ratios of the measured critical current to the depairing current are obtain…
▽ More
We demonstrate and characterize first superconducting nanowire single-photon detectors (SNSPDs) made from atomic layer-deposited (ALD) NbN layers. To assess the suitability of these films as a detector material, transport properties of bare films and bridges of different dimensions and thicknesses are investigated. Similar ratios of the measured critical current to the depairing current are obtained for micro-bridges made from ALD and sputtered NbN films. Furthermore, we characterized the single-photon response for 5 and 10 nm-thick nanowire detectors. A 100 nm-wide straight nanowire with a length of 5 $μ$m exhibits saturated count-rate dependencies on bias current and a cut-off wavelength in the near-infrared range. The ALD technique could open up the possibility to fabricate NbN-based detectors on the wafer scale and to conformally cover also non-planar surfaces for novel device concepts.
△ Less
Submitted 12 June, 2019;
originally announced June 2019.
-
Comparison of SNSPDs biased with microwave and direct currents
Authors:
Steffen Doerner,
Artem Kuzmin,
Stefan Wuensch,
Michael Siegel
Abstract:
This paper presents a detailed investigation of superconducting nanowire single-photon detectors (SNSPDs) biased with microwave and direct currents. We developed a hybrid detector, which allows the operation in the rf and dc operation mode. With this hybrid detector, we are able to compare the count rates of the same nanowire biased with dc and rf currents. Furthermore, we demonstrate the use of t…
▽ More
This paper presents a detailed investigation of superconducting nanowire single-photon detectors (SNSPDs) biased with microwave and direct currents. We developed a hybrid detector, which allows the operation in the rf and dc operation mode. With this hybrid detector, we are able to compare the count rates of the same nanowire biased with dc and rf currents. Furthermore, we demonstrate the use of the oscillating current in the rf operation mode as a reference signal in a synchronous single-photon detection mode.
△ Less
Submitted 17 January, 2019;
originally announced January 2019.
-
Geometrical jitter and bolometric regime in photon detection by straight superconducting nanowire
Authors:
Artem Kuzmin,
Steffen Doerner,
Stefan Wuensch,
Konstantin Ilin,
Michael Siegel,
Mariia Sidorova,
Alexey Semenov
Abstract:
We present a direct observation of the geometrical jitter in single photon detection by a straight superconducting nanowire. Differential measurement technique was applied to the 180-μm long nanowire similar to those commonly used in the technology of superconducting nanowire single photon detectors (SNSPD). A non-gaussian geometrical jitter appears as a wide almost uniform probability distributio…
▽ More
We present a direct observation of the geometrical jitter in single photon detection by a straight superconducting nanowire. Differential measurement technique was applied to the 180-μm long nanowire similar to those commonly used in the technology of superconducting nanowire single photon detectors (SNSPD). A non-gaussian geometrical jitter appears as a wide almost uniform probability distribution (histogram) of the delay time (latency) of the nanowire response to detected photon. White electrical noise of the readout electronics causes broadened, Gaussian shaped edges of the histogram. Subtracting noise contribution, we found for the geometrical jitter a standard deviation of 8.5 ps and the full width at half maximum (FWHM) of the distribution of 29 ps. FWHM corresponds to the propagation speed of the electrical signal along the nanowire of $6.2\times10^{6}$ m/s or 0.02 of the speed of light. Alternatively the propagation speed was estimated from the central frequency of the measured first order self-resonance of the nanowire. Both values agree well with each other and with previously reported values. As the intensity of the incident photon flux increases, the wide probability distribution collapses into a much narrower Gaussian distribution with a standard deviation dominated by the noise of electronics. We associate the collapse of the histogram with the transition from the discrete, single photon detection to the uniform bolometric regime
△ Less
Submitted 20 February, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Characterization of a photon-number resolving SNSPD using Poissonian and sub-Poissonian light
Authors:
Ekkehart Schmidt,
Eric Reutter,
Mario Schwartz,
Hüseyin Vural,
Konstantin Ilin,
Michael Jetter,
Peter Michler,
Michael Siegel
Abstract:
Photon-number resolving (PNR) single-photon detectors are of interest for a wide range of applications in the emerging field of photon based quantum technologies. Especially photonic integrated circuits will pave the way for a high complexity and ease of use of quantum photonics. Superconducting nanowire single-photon detectors (SNSPDs) are of special interest since they combine a high detection e…
▽ More
Photon-number resolving (PNR) single-photon detectors are of interest for a wide range of applications in the emerging field of photon based quantum technologies. Especially photonic integrated circuits will pave the way for a high complexity and ease of use of quantum photonics. Superconducting nanowire single-photon detectors (SNSPDs) are of special interest since they combine a high detection efficiency and a high timing accuracy with a high count rate and they can be configured as PNR-SNSPDs. Here, we present a PNR-SNSPD with a four photon resolution suitable for waveguide integration operating at a temperature of 4 K. A high statistical accuracy for the photon number is achieved for a Poissonian light source at a photon flux below 5 photons/pulse with a detection efficiency of 22.7 +- 3.0% at 900 nm and a pulse rate frequency of 76 MHz. We demonstrate the ability of such a detector to discriminate a sub-Poissonian from a Poissonian light source.
△ Less
Submitted 15 March, 2019; v1 submitted 26 October, 2018;
originally announced October 2018.
-
Deformation and stability of a viscous electrolyte drop in a uniform electric field
Authors:
Qiming Wang,
Manman Ma,
Michael Siegel
Abstract:
We study the deformation and breakup of an axisymmetric electrolyte drop which is freely suspended in an infinite dielectric medium and subjected to an imposed electric field. The electric potential in the drop phase is assumed small, so that its governing equation is approximated by a linearized Poisson-Boltzmann or modified Helmholtz equation (the Debye-Hückel regime). An accurate and efficient…
▽ More
We study the deformation and breakup of an axisymmetric electrolyte drop which is freely suspended in an infinite dielectric medium and subjected to an imposed electric field. The electric potential in the drop phase is assumed small, so that its governing equation is approximated by a linearized Poisson-Boltzmann or modified Helmholtz equation (the Debye-Hückel regime). An accurate and efficient boundary integral method is developed to solve the low-Reynolds-number flow problem for the time-dependent drop deformation, in the case of arbitrary Debye layer thickness. Extensive numerical results are presented for the case when the viscosity of the drop and surrounding medium are comparable. Qualitative similarities are found between the evolution of a drop with a thick Debye layer (characterized by the parameter $χ\ll 1$, which is an inverse dimensionless Debye layer thickness) and a perfect dielectric drop in an insulating medium. In this limit, a highly elongated steady state is obtained for sufficiently large imposed electric field, and the field inside the drop is found to be well approximated using slender body theory. In the opposite limit $χ\gg 1$, when the Debye layer is thin, the drop behaves as a highly conducting drop, even for moderate permittivity ratio $Q=ε_1/ε_2$, where $ε_1, ε_2$ is the dielectric permittivity of drop interior and exterior, respectively. For parameter values at which steady solutions no longer exist, we find three distinct types of unsteady solution or breakup modes. These are termed conical end formation, end splashing, and open end stretching. The second breakup mode, end splashing, resembles the breakup solution presented in a recent paper [R. B. Karyappa et al., J. Fluid Mech. 754, 550-589 (2014)]. We compute a phase diagram which illustrates the regions in parameter space in which the different breakup modes occur.
△ Less
Submitted 20 February, 2019; v1 submitted 22 July, 2018;
originally announced July 2018.
-
Terahertz Transition-Edge Sensor with Kinetic-Inductance Amplifier at 4.2 K
Authors:
Artem Kuzmin,
Steffen Doerner,
Stefan Singer,
Ilya Charaev,
Konstantin Ilin,
Stefan Wuensch,
Michael Siegel
Abstract:
Different terrestrial terahertz applications would benefit from large-format arrays, operating in compact and inexpensive cryocoolers at liquid helium temperature with sensitivity, limited by the 300-K background radiation only. A voltage-biased Transition-Edge Sensor (TES) as a THz detector can have sufficient sensitivity and has a number of advantages important for real applications as linearity…
▽ More
Different terrestrial terahertz applications would benefit from large-format arrays, operating in compact and inexpensive cryocoolers at liquid helium temperature with sensitivity, limited by the 300-K background radiation only. A voltage-biased Transition-Edge Sensor (TES) as a THz detector can have sufficient sensitivity and has a number of advantages important for real applications as linearity of response, high dynamic range and a simple calibration, however it requires a low-noise current readout. Usually, a current amplifier based on Superconducting Quantum-Interference Device (SQUID) is used for readout, but the scalability of this approach is limited due to complexity of the operation and fabrication. Recently, it has been shown that instead of SQUID it is possible to use a current sensor, which is based on the nonlinearity of the kinetic inductance of a current-carrying superconducting stripe. Embedding the stripe into a microwave high-Q superconducting resonator allows for reaching sufficient current sensitivity. More important, it is possible with the resonator approach to scale up to large arrays using Frequency-Division Multiplexing (FDM) in GHz range. Here, we demonstrate the operation of a voltage-biased TES with a microwave kinetic-inductance current amplifier at 4.2 K. We measured the expected intrinsic Noise-Equivalent Power NEP ~$5\times 10^{-14} \; \rm W/Hz^{1/2}$ and confirmed that a sufficient sensitivity of the readout can be reached in conjunction with a real TES operation. The construction of an array with the improved sensitivity ~ $10^{-15}\; \rm W/Hz^{1/2}$ at 4.2 K could be realized using a combination of the new current amplifier and already existing TES detectors with improved thermal isolation.
△ Less
Submitted 2 July, 2018;
originally announced July 2018.
-
Simulation and validation of surfactant-laden drops in two-dimensional Stokes flow
Authors:
Sara Pålsson,
Michael Siegel,
Anna-Karin Tornberg
Abstract:
Performing highly accurate simulations of droplet systems is a challenging problem. This is primarily due to the interface dynamics which is complicated further by the addition of surfactants. This paper presents a boundary integral method for computing the evolution of surfactant-covered droplets in 2D Stokes flow. The method has spectral accuracy in space and the adaptive time-step** scheme al…
▽ More
Performing highly accurate simulations of droplet systems is a challenging problem. This is primarily due to the interface dynamics which is complicated further by the addition of surfactants. This paper presents a boundary integral method for computing the evolution of surfactant-covered droplets in 2D Stokes flow. The method has spectral accuracy in space and the adaptive time-step** scheme allows for control of the temporal errors. Previously available semi-analytical solutions (based on conformal-map** techniques) are extended to include surfactants, and a set of algorithms is introduced to detail their evaluation. These semi-analytical solutions are used to validate and assess the accuracy of the boundary integral method, and it is demonstrated that the presented method maintains its high accuracy even when droplets are in close proximity.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Timing jitter in photon detection by straight superconducting nanowires: Effect of magnetic field and photon flux
Authors:
Mariia Sidorova,
Alexej Semenov,
Heinz-Wilhelm Hubers,
Artem Kuzmin,
Steffen Doerner,
Michael Siegel,
Denis Vodolazov
Abstract:
We studied the effect of the external magnetic field and photon flux on timing jitter in photon detection by straight superconducting NbN nanowires. At two wavelengths 800 and 1560 nm, statistical distribution in the appearance time of the photon count exhibits Gaussian shape at small times and exponential tail at large times. The characteristic exponential time is larger for photons with smaller…
▽ More
We studied the effect of the external magnetic field and photon flux on timing jitter in photon detection by straight superconducting NbN nanowires. At two wavelengths 800 and 1560 nm, statistical distribution in the appearance time of the photon count exhibits Gaussian shape at small times and exponential tail at large times. The characteristic exponential time is larger for photons with smaller energy and increases with external magnetic field while variations in the Gaussian part of the distribution are less pronounced. Increasing photon flux drives the nanowire from quantum detection mode to the bolometric mode that averages out fluctuations of the total number of nonequilibrium electrons created by the photon and drastically reduces jitter. The difference between Gaussian parts of distributions for these two modes provides the measure for the electron-number fluctuations. Corresponding standard deviation increases with the photon energy. We show that the two-dimensional hot-spot detection model explains qualitatively the effect of magnetic field.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
Fully on-chip single-photon Hanbury-Brown and Twiss experiment on a monolithic semiconductor-superconductor platform
Authors:
Mario Schwartz,
Ekkehart Schmidt,
Ulrich Rengstl,
Florian Hornung,
Stefan Hepp,
Simone L. Portalupi,
Konstantin Ilin,
Michael Jetter,
Michael Siegel,
Peter Michler
Abstract:
Photonic quantum technologies such as quantum cryptography, photonic quantum metrology, photonic quantum simulators and computers will largely benefit from highly scalable and small footprint quantum photonic circuits. To perform fully on-chip quantum photonic operations, three basic building blocks are required: single-photon sources, photonic circuits and single-photon detectors. Highly integrat…
▽ More
Photonic quantum technologies such as quantum cryptography, photonic quantum metrology, photonic quantum simulators and computers will largely benefit from highly scalable and small footprint quantum photonic circuits. To perform fully on-chip quantum photonic operations, three basic building blocks are required: single-photon sources, photonic circuits and single-photon detectors. Highly integrated quantum photonic chips on silicon and related platforms have been demonstrated incorporating only one or two of these basic building blocks. Previous implementations of all three components were mainly limited by laser stray light, making temporal filtering necessary or required complex manipulation to transfer all components onto one chip. So far, a monolithic, simultaneous implementation of all elements demonstrating single-photon operation remains elusive. Here, we present a fully-integrated Hanbury-Brown and Twiss setup on a micron-sized footprint, consisting of a GaAs waveguide embedding quantum dots as single-photon sources, a waveguide beamsplitter and two superconducting nanowire single-photon detectors. This enables a second-order correlation measurement at the single-photon level under both continuous-wave and pulsed resonant excitation.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
Continuous bunch-by-bunch spectroscopic investigation of the micro-bunching instability
Authors:
Johannes L. Steinmann,
Tobias Boltz,
Miriam Brosi,
Erik Bründermann,
Michele Caselle,
Benjamin Kehrer,
Lorenzo Rota,
Patrik Schönfeldt,
Marcel Schuh,
Michael Siegel,
Marc Weber,
Anke-Susanne Müller
Abstract:
Electron accelerators and synchrotrons can be operated to provide short emission pulses due to longitudinally compressed or sub-structured electron bunches. Above a threshold current, the high charge density leads to the micro-bunching instability and the formation of sub-structures on the bunch shape. These time-varying sub-structures on bunches of picoseconds-long duration lead to bursts of cohe…
▽ More
Electron accelerators and synchrotrons can be operated to provide short emission pulses due to longitudinally compressed or sub-structured electron bunches. Above a threshold current, the high charge density leads to the micro-bunching instability and the formation of sub-structures on the bunch shape. These time-varying sub-structures on bunches of picoseconds-long duration lead to bursts of coherent synchrotron radiation in the terahertz frequency range. Therefore, the spectral information in this range contains valuable information about the bunch length, shape and sub-structures. Based on the KAPTURE readout system, a 4-channel single-shot THz spectrometer capable of recording 500 million spectra per second and streaming readout is presented. First measurements of time-resolved spectra are compared to simulation results of the Inovesa Vlasov-Fokker-Planck solver. The presented results lead to a better understanding of the bursting dynamics especially above the micro-bunching instability threshold.
△ Less
Submitted 4 October, 2018; v1 submitted 26 October, 2017;
originally announced October 2017.
-
Superconducting noise bolometer with microwave bias and readout for array applications
Authors:
A. A. Kuzmin,
A. D. Semenov,
S. V. Shitov,
M. Merker,
S. H. Wuensch,
A. V. Ustinov,
M. Siegel
Abstract:
We present a superconducting noise bolometer for terahertz radiation, which is suitable for large-format arrays. It is based on an antenna-coupled superconducting micro-bridge embedded in a high-quality factor superconducting resonator for a microwave bias and readout with frequency-division multiplexing in the GHz range. The micro-bridge is kept below its critical temperature and biased with a mi…
▽ More
We present a superconducting noise bolometer for terahertz radiation, which is suitable for large-format arrays. It is based on an antenna-coupled superconducting micro-bridge embedded in a high-quality factor superconducting resonator for a microwave bias and readout with frequency-division multiplexing in the GHz range. The micro-bridge is kept below its critical temperature and biased with a microwave current of slightly lower amplitude than the critical current of the micro-bridge. The response of the detector is the rate of superconducting fluctuations, which depends exponentially on the concentration of quasiparticles in the micro-bridge. Excess quasiparticles are generated by an incident THz signal. Since the quasiparticle lifetime increases exponentially at lower operation temperature, the noise equivalent power rapidly decreases. This approach allows for large arrays of noise bolometers operating above 1 K with sensitivity, limited by 300-K background noise. Moreover, the response of the bolometer always dominates the noise of the readout due to relatively large amplitude of the bias current. We performed a feasibility study on a proof-of-concept device with a ${1.0\times 0.5 \rm μm^{2}}$ micro-bridge from a 9-nm thin Nb film on a sapphire substrate. Having a critical temperature of 5.8 K, it operates at 4.2 K and is biased at the frequency 5.6 GHz. For the quasioptical input at 0.65 THz, we measured the noise equivalent power ${\approx 3\times 10^{-12}\rm W/\sqrt Hz}$ , which is close to expectations for this particular device in the noise-response regime.
△ Less
Submitted 9 September, 2017;
originally announced September 2017.
-
Compact microwave kinetic inductance nanowire galvanometer for cryogenic detectors at 4.2 K
Authors:
S. Doerner,
A. Kuzmin,
K. Graf,
S. Wuensch,
I. Charaev,
M. Siegel
Abstract:
We present a compact current sensor based on a superconducting microwave lumped-element resonator with a nanowire kinetic inductor, operating at 4.2 K. The sensor is suitable for multiplexed readout in GHz range of large-format arrays of cryogenic detectors. The device consists of a lumped-element resonant circuit, fabricated from a single 4-nm-thick superconducting layer of niobium nitride. Thus,…
▽ More
We present a compact current sensor based on a superconducting microwave lumped-element resonator with a nanowire kinetic inductor, operating at 4.2 K. The sensor is suitable for multiplexed readout in GHz range of large-format arrays of cryogenic detectors. The device consists of a lumped-element resonant circuit, fabricated from a single 4-nm-thick superconducting layer of niobium nitride. Thus, the fabrication and operation is significantly simplified in comparison to state-of-the-art approaches. Because the resonant circuit is inductively coupled to the feed line the current to be measured can directly be injected without having the need of an impedance matching circuit, reducing the system complexity. With the proof-of-concept device we measured a current noise floor δImin of 10 pA/Hz1/2 at 10 kHz. Furthermore, we demonstrate the ability of our sensor to amplify a pulsed response of a superconducting nanowire single-photon detector using a GHz-range carrier for effective frequency-division multiplexing.
△ Less
Submitted 8 September, 2017;
originally announced September 2017.
-
Proximity effect model of ultra-narrow NbN strips
Authors:
I. Charaev,
T. Silbernagel,
B. Bachowsky,
A. Kuzmin,
S. Doerner,
K. Ilin,
A. Semenov,
D. Roditchev,
D. Yu. Vodolazov,
M. Siegel
Abstract:
We show that narrow superconducting strips in superconducting (S) and normal (N) states are universally described by the model presenting them as lateral NSN proximity systems in which the superconducting central band is sandwiched between damaged edge-bands with suppressed superconductivity.The width of the superconducting band was experimentally determined from the value of magnetic field at whi…
▽ More
We show that narrow superconducting strips in superconducting (S) and normal (N) states are universally described by the model presenting them as lateral NSN proximity systems in which the superconducting central band is sandwiched between damaged edge-bands with suppressed superconductivity.The width of the superconducting band was experimentally determined from the value of magnetic field at which the band transits from the Meissner state to the static vortex state. Systematic experimental study of 4.9 nm thick NbN strips with widths in the interval from 50 nm to 20 $μ$m, which are all smaller than the Pearl's length, demonstrates gradual evolution of the temperature dependence of the critical current with the change of the strip width.
△ Less
Submitted 16 August, 2017;
originally announced August 2017.
-
Physical mechanisms of timing jitter in photon detection by current carrying superconducting nanowires
Authors:
Mariia Sidorova,
Alexej Semenov,
Heinz-Wilhelm Hubers,
Ilya Charaev,
Artem Kuzmin,
Steffen Doerner,
Michael Siegel
Abstract:
We studied timing jitter in the appearance of photon counts in meandering nanowires with different fractional amount of bends. Timing jitter, which is the probability density of the random time delay between photon absorption in current-carrying superconducting nanowire and appearance of the normal domain, reveals two different underlying physical scenarios. In the deterministic regime, which is r…
▽ More
We studied timing jitter in the appearance of photon counts in meandering nanowires with different fractional amount of bends. Timing jitter, which is the probability density of the random time delay between photon absorption in current-carrying superconducting nanowire and appearance of the normal domain, reveals two different underlying physical scenarios. In the deterministic regime, which is realized at large currents and photon energies, jitter is controlled by position dependent detection threshold in straight parts of meanders and decreases with the current. At small photon energies, jitter increases and its current dependence disappears. In this probabilistic regime jitter is controlled by Poisson process in that magnetic vortices jump randomly across the wire in areas adjacent to the bends.
△ Less
Submitted 6 September, 2017; v1 submitted 18 July, 2017;
originally announced July 2017.
-
Enhancement of superconductivity in NbN nanowires by negative electron-beam lithography with positive resist
Authors:
I. Charaev,
T. Silbernagel,
B. Bachowsky,
A. Kuzmin,
S. Doerner,
K. Ilin,
A. Semenov,
D. Roditchev,
D. Yu. Vodolazov,
M. Siegel
Abstract:
We performed comparative experimental investigation of superconducting NbN nanowires which were prepared by means of positive-and negative electron-beam lithography with the same positive tone Poly-methyl-methacrylate (PMMA) resist. We show that nanowires with a thickness 4.9 nm and widths less than 100 nm demonstrate at 4.2 K higher critical temperature and higher density of critical and retrappi…
▽ More
We performed comparative experimental investigation of superconducting NbN nanowires which were prepared by means of positive-and negative electron-beam lithography with the same positive tone Poly-methyl-methacrylate (PMMA) resist. We show that nanowires with a thickness 4.9 nm and widths less than 100 nm demonstrate at 4.2 K higher critical temperature and higher density of critical and retrap** currents when they are prepared by negative lithography. Also the ratio of the experimental critical-current to the depairing critical current is larger for nanowires prepared by negative lithography. We associate the observed enhancement of superconducting properties with the difference in the degree of damage that nanowire edges sustain in the lithographic process. A whole range of advantages which is offered by the negative lithography with positive PMMA resist ensures high potential of this technology for improving performance metrics of superconducting nanowire singe-photon detectors.
△ Less
Submitted 6 June, 2017; v1 submitted 5 June, 2017;
originally announced June 2017.
-
Frequency-Multiplexed bias and readout of a 16-pixel Superconducting Nanowire Single-Photon Detector Array
Authors:
Steffen Doerner,
Artem Kuzmin,
Stefan Wuensch,
Ilya Charaev,
Florian Boes,
Thomas Zwick,
Michael Siegel
Abstract:
We demonstrate a 16-pixel array of radio-frequency superconducting nanowire single-photon detectors with an integrated and scalable frequency-division multiplexing architecture, reducing the required bias and readout lines to a single microwave feed line. The electrical behavior of the photon-sensitive nanowires, embedded in a resonant circuit, as well as the optical performance and timing jitter…
▽ More
We demonstrate a 16-pixel array of radio-frequency superconducting nanowire single-photon detectors with an integrated and scalable frequency-division multiplexing architecture, reducing the required bias and readout lines to a single microwave feed line. The electrical behavior of the photon-sensitive nanowires, embedded in a resonant circuit, as well as the optical performance and timing jitter of the single detectors is discussed. Besides the single pixel measurements we also demonstrate the operation of the 16-pixel array with a temporal, spatial and photon-number resolution.
△ Less
Submitted 28 April, 2017;
originally announced May 2017.
-
Operation of Multi-Pixel Radio-Frequency Superconducting Nanowire Single-Photon Detector Arrays
Authors:
Steffen Doerner,
Artem Kuzmin,
Stefan Wuensch,
Ilya Charaev,
Michael Siegel
Abstract:
The concept of the radio-frequency superconducting nanowire single-photon detector (RF-SNSPD) allows frequency-division multiplexing (FDM) of the bias and readout lines of several SNSPDs. Using this method, a multi-pixel array can be operated by only one feed line. Consequently, the system complexity as well as the heat load is significantly reduced. To allocate many pixels into a small bandwidth…
▽ More
The concept of the radio-frequency superconducting nanowire single-photon detector (RF-SNSPD) allows frequency-division multiplexing (FDM) of the bias and readout lines of several SNSPDs. Using this method, a multi-pixel array can be operated by only one feed line. Consequently, the system complexity as well as the heat load is significantly reduced. To allocate many pixels into a small bandwidth the quality factor of each device is crucial. In this paper, we present an improved RF-SNSPD design. This new design enables a simple tuning of the quality factor as well as the resonant frequency. With a two-pixel device we have demonstrated the operation without crosstalk between the detectors and showed the time, spatial and photon number resolution. Thereby a single pixel requires only a bandwidth of 14 MHz.
△ Less
Submitted 7 December, 2016;
originally announced December 2016.
-
Asymmetry in the effect of magnetic field on photon detection and dark counts in bended nanostrips
Authors:
A. Semenov,
I. Charaev,
R. Lusche,
K. Ilin,
M. Siegel,
H. -W. Huebers,
N. Bralovic,
K. Dopf,
D. Yu. Vodolazov
Abstract:
Current crowding in the bends of superconducting nano-structures not only restricts measurable critical current in such structures but also redistributes local probabilities for dark and light counts to appear. Using structures from strips in the form of a square spiral which contain bends with the very same curvature with respect to the directions of bias current and external magnetic field, we h…
▽ More
Current crowding in the bends of superconducting nano-structures not only restricts measurable critical current in such structures but also redistributes local probabilities for dark and light counts to appear. Using structures from strips in the form of a square spiral which contain bends with the very same curvature with respect to the directions of bias current and external magnetic field, we have shown that dark counts as well as light counts at small photon energies originate from areas around the bends. The minimum in the rate of dark counts reproduces the asymmetry of the maximum critical current density as function of the magnetic field. Contrary, the minimum in the rate of light counts demonstrate opposite asymmetry. The rate of light counts become symmetric at large currents and fields. Comparing locally computed absorption probabilities for photons and the simulated threshold detection current we found the approximate locations of areas near bends which deliver asymmetric light counts. Any asymmetry is absent in Archimedean spiral structures without bends.
△ Less
Submitted 4 September, 2015; v1 submitted 14 August, 2015;
originally announced August 2015.
-
Superconducting single photon detectors integrated with diamond nanophotonic circuits
Authors:
Patrik Rath,
Oliver Kahl,
Simone Ferrari,
Fabian Sproll,
Georgia Lewes-Malandrakis,
Dietmar Brink,
Konstantin Ilin,
Michael Siegel,
Christoph Nebel,
Wolfram Pernice
Abstract:
Photonic quantum technologies promise to repeat the success of integrated nanophotonic circuits in non-classical applications. Using linear optical elements, quantum optical computations can be performed with integrated optical circuits and thus allow for overcoming existing limitations in terms of scalability. Besides passive optical devices for realizing photonic quantum gates, active elements s…
▽ More
Photonic quantum technologies promise to repeat the success of integrated nanophotonic circuits in non-classical applications. Using linear optical elements, quantum optical computations can be performed with integrated optical circuits and thus allow for overcoming existing limitations in terms of scalability. Besides passive optical devices for realizing photonic quantum gates, active elements such as single photon sources and single photon detectors are essential ingredients for future optical quantum circuits. Material systems which allow for the monolithic integration of all components are particularly attractive, including III-V semiconductors, silicon and also diamond. Here we demonstrate nanophotonic integrated circuits made from high quality polycrystalline diamond thin films in combination with on-chip single photon detectors. Using superconducting nanowires coupled evanescently to travelling waves we achieve high detection efficiencies up to 66 % combined with low dark count rates and timing resolution of 190 ps. Our devices are fully scalable and hold promise for functional diamond photonic quantum devices.
△ Less
Submitted 16 May, 2015;
originally announced May 2015.
-
Wide-Range Bolometer with RF Readout TES
Authors:
S. V. Shitov,
N. N. Abramov,
A. A. Kuzmin,
M. Merker,
M. Arndt,
S. H. Wuensch,
K. S. Ilin,
E. Erhan,
A. Ustinov,
M. Siegel
Abstract:
To improve both scalability and noise-filtering capability of a Transition-Edge Sensor (TES), a new concept of a thin-film detector is suggested, which is based on embedding a microbridge TES into a high-Q planar GHz range resonator weakly coupled to a 50 Ohm-readout transmission line. Such a TES element is designed as a hot-electron microbolometer coupled to a THz range antenna and as a load of t…
▽ More
To improve both scalability and noise-filtering capability of a Transition-Edge Sensor (TES), a new concept of a thin-film detector is suggested, which is based on embedding a microbridge TES into a high-Q planar GHz range resonator weakly coupled to a 50 Ohm-readout transmission line. Such a TES element is designed as a hot-electron microbolometer coupled to a THz range antenna and as a load of the resonator at the same time. A weak THz signal coupled to the antenna heats the microbridge TES, thus reducing the quality factor of the resonator and leading to a power increment in the readout line. The power-to-power conversion gain, an essential figure of merit, is estimated to be above 10. To demonstrate the basic concept, we fabricated and tested a few submicron sized devices from Nb thin films for operation temperature about 5 K. The dc and rf characterization of the new device is made at a resonator frequency about 5.8 GHz. A low-noise HEMT amplifier is used in our TES experiments without the need for a SQUID readout. The optical sensitivity to blackbody radiation within the frequency band 600-700 GHz is measured as $\sim3\times 10^{-14} \textrm W/\sqrt{\textrm Hz}$ at Tc {\approx} 5 K at bath temperature ~ 1.5 K.
△ Less
Submitted 17 December, 2014;
originally announced December 2014.
-
Superconducting hot-electron nanobolometer with microwave bias and readout
Authors:
A. A. Kuzmin,
M. Merker,
S. V. Shitov,
N. N. Abramov,
A. B. Ermakov,
M. Arndt,
S. H. Wuensch,
K. S. Ilin,
A. V. Ustinov,
M Siegel
Abstract:
We propose a new detection technique based on radio-frequency (RF) bias and readout of an antenna-coupled superconducting nanobolometer. This approach is suitable for Frequency-Division-Multiplexing (FDM) readout of large arrays using broadband low-noise RF amplifier. We call this new detector RFTES. This feasibility study was made on demonstrator devices which are made in all-Nb technology and op…
▽ More
We propose a new detection technique based on radio-frequency (RF) bias and readout of an antenna-coupled superconducting nanobolometer. This approach is suitable for Frequency-Division-Multiplexing (FDM) readout of large arrays using broadband low-noise RF amplifier. We call this new detector RFTES. This feasibility study was made on demonstrator devices which are made in all-Nb technology and operate at 4.2 K. The studied RFTES devices consist of an antenna-coupled superconducting nanobolometer made of ultrathin niobium films with transition temperature Tc = 5.2 K. The 0.65-THz antenna and nanobolometer are embedded as a load into a GHz-range coplanar niobium resonator (Tc = 8.9 K, Q = 4000). To heat the superconducting Nb nanobolometer close to the Tc, the RF power at resonator frequency f = 5.8 GHz is applied via a transmission line which is weakly coupled (-11 dB) to the loaded resonator. The THz-antenna of RFTES was placed in the focus of a sapphire immersion lens inside a He4-cryostat equipped with an optical window and a semiconductor RF amplifier. We have demonstrated optical response of the RFTES to THz radiation. The demonstrator receiver system employing the RFTES device showed an optical Noise-Equivalent Power (NEP) 1e-14 W/sqrt(Hz) at 4.2 K.
△ Less
Submitted 15 December, 2014;
originally announced December 2014.
-
Temperature-dependence of detection efficiency in NbN and TaN SNSPD
Authors:
Andreas Engel,
Kevin Inderbitzin,
Andreas Schilling,
Robert Lusche,
Alexei Semenov,
Heinz-Wilhelm Hübers,
Dagmar Henrich,
Matthias Hofherr,
Konstantin Il'in,
Michael Siegel
Abstract:
We present systematic measurements of the temperature-dependence of detection efficiencies in TaN and NbN superconducting nanowire single-photon detectors. We have observed a clear increase of the cut-off wavelength with decreasing temperature that we can qualitatively describe with a temperature-dependent diffusion coefficient of the quasi-particles created after photon absorption. Furthermore, t…
▽ More
We present systematic measurements of the temperature-dependence of detection efficiencies in TaN and NbN superconducting nanowire single-photon detectors. We have observed a clear increase of the cut-off wavelength with decreasing temperature that we can qualitatively describe with a temperature-dependent diffusion coefficient of the quasi-particles created after photon absorption. Furthermore, the detection efficiency at wavelengths shorter than the cut-off wavelength as well as at longer wavelengths exhibit distinct temperature dependencies. The underlying causes and possible consequences for microscopic detection models are discussed.
△ Less
Submitted 8 January, 2013; v1 submitted 19 October, 2012;
originally announced October 2012.
-
An ultra-fast superconducting Nb nanowire single-photon detector for soft X-rays
Authors:
Kevin Inderbitzin,
Andreas Engel,
Andreas Schilling,
Konstantin Il'in,
Michael Siegel
Abstract:
Although superconducting nanowire single-photon detectors (SNSPDs) are well studied regarding the detection of infrared/optical photons and keV-molecules, no studies on continuous X-ray photon counting by thick-film detectors have been reported so far. We fabricated a 100 nm thick niobium X-ray SNSPD (an X-SNSPD), and studied its detection capability of photons with keV-energies in continuous mode…
▽ More
Although superconducting nanowire single-photon detectors (SNSPDs) are well studied regarding the detection of infrared/optical photons and keV-molecules, no studies on continuous X-ray photon counting by thick-film detectors have been reported so far. We fabricated a 100 nm thick niobium X-ray SNSPD (an X-SNSPD), and studied its detection capability of photons with keV-energies in continuous mode. The detector is capable to detect photons even at reduced bias currents of 0.4%, which is in sharp contrast to optical thin-film SNSPDs. No dark counts were recorded in extended measurement periods. Strikingly, the signal amplitude distribution depends significantly on the photon energy spectrum.
△ Less
Submitted 12 September, 2012; v1 submitted 8 August, 2012;
originally announced August 2012.
-
Broadening of hot-spot response spectrum of superconducting NbN nanowire single-photon detector with reduced nitrogen content
Authors:
D. Henrich,
S. Dörner,
M. Hofherr,
K. Il'in,
A. Semenov,
E. Heintze,
M. Scheffler,
M. Dressel,
M. Siegel
Abstract:
The spectral detection efficiency and the dark count rate of superconducting nanowire single-photon detectors (SNSPD) has been studied systematically on detectors made from thin NbN films with different chemical compositions. Reduction of the nitrogen content in the 4 nm thick NbN films results in a more than two orders of magnitude decrease of the dark count rates and in a red shift of the cut-of…
▽ More
The spectral detection efficiency and the dark count rate of superconducting nanowire single-photon detectors (SNSPD) has been studied systematically on detectors made from thin NbN films with different chemical compositions. Reduction of the nitrogen content in the 4 nm thick NbN films results in a more than two orders of magnitude decrease of the dark count rates and in a red shift of the cut-off wavelength of the hot-spot SNSPD response. The observed phenomena are explained by an improvement of uniformity of NbN films that has been confirmed by a decrease of resistivity and an increase of the ratio of the measured critical current to the depairing current. The latter factor is considered as the most crucial for both the cut-off wavelength and the dark count rates of SNSPD. Based on our results we propose a set of criteria for material properties to optimize SNSPD in the infrared spectral region.
△ Less
Submitted 9 July, 2012;
originally announced July 2012.
-
Splash control of drop impacts with geometric targets
Authors:
Gabriel Juarez,
Thomai Gastopoulos,
Yibin Zhang,
Michael L. Siegel,
Paulo E. Arratia
Abstract:
Drop impacts on solid and liquid surfaces exhibit complex dynamics due to the competition of inertial, viscous, and capillary forces. After impact, a liquid lamella develops and expands radially, and under certain conditions, the outer rim breaks up into an irregular arrangement of filaments and secondary droplets. We show experimentally that the lamella expansion and subsequent break up of the ou…
▽ More
Drop impacts on solid and liquid surfaces exhibit complex dynamics due to the competition of inertial, viscous, and capillary forces. After impact, a liquid lamella develops and expands radially, and under certain conditions, the outer rim breaks up into an irregular arrangement of filaments and secondary droplets. We show experimentally that the lamella expansion and subsequent break up of the outer rim can be controlled by length scales that are of comparable dimension to the impacting drop diameter. Under identical impact parameters, ie. fluid properties and impact velocity, we observe unique splashing dynamics by varying the target cross-sectional geometry. These behaviors include: (i) geometrically-shaped lamellae and (ii) a transition in splashing stability, from regular to irregular splashing. We propose that regular splashes are controlled by the azimuthal perturbations imposed by the target cross-sectional geometry and that irregular splashes are governed by the fastest-growing unstable Plateau-Rayleigh mode.
△ Less
Submitted 19 February, 2012; v1 submitted 15 November, 2011;
originally announced November 2011.
-
Trapped electron coupled to superconducting devices
Authors:
P. Bushev,
D. Bothner,
J. Nagel,
M. Kemmler,
K. B. Konovalenko,
A. Loerincz,
K. Ilin,
M. Siegel,
D. Koelle,
R. Kleiner,
F. Schmidt-Kaler
Abstract:
We propose to couple a trapped single electron to superconducting structures located at a variable distance from the electron. The electron is captured in a cryogenic Penning trap using electric fields and a static magnetic field in the Tesla range. Measurements on the electron will allow investigating the properties of the superconductor such as vortex structure, dam** and decoherence. We propo…
▽ More
We propose to couple a trapped single electron to superconducting structures located at a variable distance from the electron. The electron is captured in a cryogenic Penning trap using electric fields and a static magnetic field in the Tesla range. Measurements on the electron will allow investigating the properties of the superconductor such as vortex structure, dam** and decoherence. We propose to couple a superconducting microwave resonator to the electron in order to realize a circuit QED-like experiment, as well as to couple superconducting Josephson junctions or superconducting quantum interferometers (SQUIDs) to the electron. The electron may also be coupled to a vortex which is situated in a double well potential, realized by nearby pinning centers in the superconductor, acting as a quantum mechanical two level system that can be controlled by a transport current tilting the double well potential. When the vortex is trapped in the interferometer arms of a SQUID, this would allow its detection both by the SQUID and by the electron.
△ Less
Submitted 17 September, 2010;
originally announced September 2010.
-
Current Assisted, Thermally Activated Flux Liberation in Ultrathin Nanopatterned NbN Superconducting Meander Structures
Authors:
H. Bartolf,
A. Engel,
A. Schilling,
K. Il'in,
M. Siegel,
H. -W. Huebers,
A. Semenov
Abstract:
We present results from an extensive study of fluctuation phenomena in superconducting nanowires made from sputtered NbN. Nanoscale wires were fabricated in form of a meander and operated at a constant temperature T~0.4Tc(0). The superconducting state is driven close to the electronic phase transition by a high bias current near the critical one. Fluctuations of sufficient strength temporarily d…
▽ More
We present results from an extensive study of fluctuation phenomena in superconducting nanowires made from sputtered NbN. Nanoscale wires were fabricated in form of a meander and operated at a constant temperature T~0.4Tc(0). The superconducting state is driven close to the electronic phase transition by a high bias current near the critical one. Fluctuations of sufficient strength temporarily drive a section of the meander structure into the normal conducting state, which can be registered as a voltage pulse of nanosecond duration. We considered three different models (vortex-antivortex pairs, vortex edge barriers and phase slip centers) to explain the experimental data. Only thermally excited vortices, either via unbinding of vortex-antivortex pairs or vortices overcoming the edge barrier, lead to a satisfactory and consistent description for all measurements.
△ Less
Submitted 10 November, 2009;
originally announced November 2009.