-
Characterization of the low electric field and zero-temperature two-level-system loss in hydrogenated amorphous silicon
Authors:
Fabien Defrance,
Andrew D. Beyer,
Shibo Shu,
Jack Sayers,
Sunil R. Golwala
Abstract:
Two-level systems (TLS) are an important, if not dominant, source of loss and noise for superconducting resonators such as those used in kinetic inductance detectors and some quantum information science platforms. They are similarly important for loss in photolithographically fabricated superconducting mm-wave/THz transmission lines. For both lumped-element and transmission-line structures, native…
▽ More
Two-level systems (TLS) are an important, if not dominant, source of loss and noise for superconducting resonators such as those used in kinetic inductance detectors and some quantum information science platforms. They are similarly important for loss in photolithographically fabricated superconducting mm-wave/THz transmission lines. For both lumped-element and transmission-line structures, native amorphous surface oxide films are typically the sites of such TLS in non-microstripline geometries, while loss in the (usually amorphous) dielectric film itself usually dominates in microstriplines. We report here on the demonstration of low TLS loss at GHz frequencies in hydrogenated amorphous silicon (a-Si:H) films deposited by plasma-enhanced chemical vapor deposition in superconducting lumped-element resonators using parallel-plate capacitors (PPCs). The values we obtain from two recipes in different deposition machines, 7$\,\times\,10^{-6}$ and 12$\,\times\,10^{-6}$, improve on the best achieved in the literature by a factor of 2--4 for a-Si:H and are comparable to recent measurements of amorphous germanium. Moreover, we have taken care to extract the true zero-temperature, low-field loss tangent of these films, accounting for temperature and field saturation effects that can yield misleading results. Such robustly fabricated and characterized films render the use of PPCs with deposited amorphous films a viable architecture for superconducting resonators, and they also promise extremely low loss and high quality factor for photolithographically fabricated superconducting mm-wave/THz transmission lines used in planar antennas and resonant filters.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Hybrid quantum programming with PennyLane Lightning on HPC platforms
Authors:
Ali Asadi,
Amintor Dusko,
Chae-Yeun Park,
Vincent Michaud-Rioux,
Isidor Schoch,
Shuli Shu,
Trevor Vincent,
Lee James O'Riordan
Abstract:
We introduce PennyLane's Lightning suite, a collection of high-performance state-vector simulators targeting CPU, GPU, and HPC-native architectures and workloads. Quantum applications such as QAOA, VQE, and synthetic workloads are implemented to demonstrate the supported classical computing architectures and showcase the scale of problems that can be simulated using our tooling. We benchmark the p…
▽ More
We introduce PennyLane's Lightning suite, a collection of high-performance state-vector simulators targeting CPU, GPU, and HPC-native architectures and workloads. Quantum applications such as QAOA, VQE, and synthetic workloads are implemented to demonstrate the supported classical computing architectures and showcase the scale of problems that can be simulated using our tooling. We benchmark the performance of Lightning with backends supporting CPUs, as well as NVidia and AMD GPUs, and compare the results to other commonly used high-performance simulator packages, demonstrating where Lightning's implementations give performance leads. We show improved CPU performance by employing explicit SIMD intrinsics and multi-threading, batched task-based execution across multiple GPUs, and distributed forward and gradient-based quantum circuit executions across multiple nodes. Our data shows we can comfortably simulate a variety of circuits, giving examples with up to 30 qubits on a single device or node, and up to 41 qubits using multiple nodes.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Hierarchical phased-array antennas coupled to Al KIDs: a scalable architecture for multi-band mm/submm focal planes
Authors:
Jean-Marc Martin,
Junhan Kim,
Fabien Defrance,
Shibo Shu,
Andrew D. Beyer,
Peter K. Day,
Jack Sayers,
Sunil R. Golwala
Abstract:
We present the optical characterization of two-scale hierarchical phased-array antenna kinetic inductance detectors (KIDs) for millimeter/submillimeter wavelengths. Our KIDs have a lumped-element architecture with parallel plate capacitors and aluminum inductors. The incoming light is received with a hierarchical phased array of slot-dipole antennas, split into 4 frequency bands (between 125 GHz a…
▽ More
We present the optical characterization of two-scale hierarchical phased-array antenna kinetic inductance detectors (KIDs) for millimeter/submillimeter wavelengths. Our KIDs have a lumped-element architecture with parallel plate capacitors and aluminum inductors. The incoming light is received with a hierarchical phased array of slot-dipole antennas, split into 4 frequency bands (between 125 GHz and 365 GHz) with on-chip lumped-element band-pass filters, and routed to different KIDs using microstriplines. Individual pixels detect light for the 3 higher frequency bands (190-365 GHz) and the signals from four individual pixels are coherently summed to create a larger pixel detecting light for the lowest-frequency band (125-175 GHz). The spectral response of the band-pass filters was measured using Fourier transform spectroscopy (FTS), the far-field beam pattern of the phased-array antennas was obtained using an infrared source mounted on a 2-axis translating stage, and the optical efficiency of the KIDs was characterized by observing loads at 294 K and 77 K. We report on the results of these three measurements.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Two-relaxation-time regularized lattice Boltzmann model for Navier-Stokes equations
Authors:
Yuan Yu,
Zuojian Qin,
Siwei Chen,
Shi Shu,
Hai-Zhuan Yuan
Abstract:
In this paper, we propose a novel two-relaxation-time regularized lattice Boltzmann (TRT-RLB) model for simulating weakly compressible isothermal flows. A free relaxation parameter, $τ_{s,2}$, is employed to relax the regularized non-equilibrium third-order terms. Chapman-Enskog analysis reveals that our model can accurately recover the Navier-Stokes equations (NSEs). Theoretical analysis of the P…
▽ More
In this paper, we propose a novel two-relaxation-time regularized lattice Boltzmann (TRT-RLB) model for simulating weakly compressible isothermal flows. A free relaxation parameter, $τ_{s,2}$, is employed to relax the regularized non-equilibrium third-order terms. Chapman-Enskog analysis reveals that our model can accurately recover the Navier-Stokes equations (NSEs). Theoretical analysis of the Poiseuille flow problem demonstrates that the slip velocity magnitude in the proposed model is controlled by a magic parameter, which can be entirely eliminated under specific values, consistent with the classical TRT model. Our simulations of the double shear layer problem, Taylor-Green vortex flow, and force-driven Poiseuille flow confirm that the stability and accuracy of our model significantly surpass those of both the regularized lattice Boltzmann (RLB) and two-relaxation-time (TRT) models, even under super-high Reynolds numbers as $Re=10^7$. Concurrently, the TRT-RLB model exhibits superior performance in very high viscosity scenarios. The simulations of cree** flow around a square cylinder demonstrates the model's capability to accurately compute ultra-low Reynolds numbers as $Re=10^{-7}$. This study establishes the TRT-RLB model as a flexible and robust tool in computational fluid dynamics.
△ Less
Submitted 27 March, 2024; v1 submitted 15 December, 2023;
originally announced December 2023.
-
Flexo-photovoltaic effect and above-bandgap photovoltage in halide perovskites
Authors:
Zhiguo Wang,
Shengwen Shu,
Xiaoyong Wei,
Renhong Liang,
Shanming Ke,
Longlong Shu,
Gustau Catalan
Abstract:
Halide perovskites have outstanding photovoltaic properties which have been optimized through interfacial engineering. However, as these materials approach the limits imposed by the physics of semiconductor junctions, it is urgent to explore alternatives, such as the bulk photovoltaic effect, whose physical origin is different and not bound by the same limits. In this context, we focus on the flex…
▽ More
Halide perovskites have outstanding photovoltaic properties which have been optimized through interfacial engineering. However, as these materials approach the limits imposed by the physics of semiconductor junctions, it is urgent to explore alternatives, such as the bulk photovoltaic effect, whose physical origin is different and not bound by the same limits. In this context, we focus on the flexo-photovoltaic effect, a type of bulk photovoltaic effect that was recently observed in oxides under strain gradients. We have measured the flexo-photovoltaic effect of MAPbBr3 and MAPbI3 crystals under bending and found it to be orders of magnitude larger than for SrTiO3, the benchmark flexo-photovoltaic oxide. For sufficiently large strain gradients, photovoltages bigger than the bandgap can be produced. Bulk photovoltaic effects are additive and, for MAPbI3, the flexo-photovoltage exists on top of a native bulk photovoltage that is hysteretic, consistent with the electrically switchable macroscopic polarization of this material. The results suggest that harnessing the flexo-photovoltaic effect through strain gradient engineering can provide a functional leap forward for halide perovskites.
△ Less
Submitted 4 January, 2023; v1 submitted 9 September, 2022;
originally announced September 2022.
-
Wideband Direct Detection Constraints on Hidden Photon Dark Matter with the QUALIPHIDE Experiment
Authors:
Karthik Ramanathan,
Nikita Klimovich,
Ritoban Basu Thakur,
Byeong Ho Eom,
Henry G. LeDuc,
Shibo Shu,
Andrew D. Beyer,
Peter K. Day
Abstract:
We report direction detection constraints on the presence of hidden photon dark matter with masses between 20-30 ueV using a cryogenic emitter-receiver-amplifier spectroscopy setup designed as the first iteration of QUALIPHIDE (QUantum LImited PHotons In the Dark Experiment). A metallic dish sources conversion photons from hidden photon kinetic mixing onto a horn antenna which is coupled to a C-ba…
▽ More
We report direction detection constraints on the presence of hidden photon dark matter with masses between 20-30 ueV using a cryogenic emitter-receiver-amplifier spectroscopy setup designed as the first iteration of QUALIPHIDE (QUantum LImited PHotons In the Dark Experiment). A metallic dish sources conversion photons from hidden photon kinetic mixing onto a horn antenna which is coupled to a C-band kinetic inductance traveling wave parametric amplifier, providing for near quantum-limited noise performance. We demonstrate a first probing of the kinetic mixing parameter "chi" to just above 10^-12 for the majority of hidden photon masses in this region. These results not only represent stringent constraints on new dark matter parameter space but are also the first demonstrated use of wideband quantum-limited amplification for astroparticle applications
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
A kinetic inductance detectors array design for high background conditions at 150 GHz
Authors:
Shibo Shu,
Jack Sayers,
Peter K. Day
Abstract:
We present a design for an array of kinetic inductance detectors (KIDs) integrated with phased array antennas for imaging at 150 GHz under high background conditions. The microstrip geometry KID detectors are projected to achieve photon noise limited sensitivity with larger than 100 pW absorbed optical power. Both the microstrip KIDs and the antenna feed network make use of a low-loss amorphous si…
▽ More
We present a design for an array of kinetic inductance detectors (KIDs) integrated with phased array antennas for imaging at 150 GHz under high background conditions. The microstrip geometry KID detectors are projected to achieve photon noise limited sensitivity with larger than 100 pW absorbed optical power. Both the microstrip KIDs and the antenna feed network make use of a low-loss amorphous silicon dielectric. A new aspect of the antenna implementation is the use of a NbTiN microstrip feed network to facilitate impedance matching to the 50 Ohm antenna. The array has 256 pixels on a 6-inch wafer and each pixel has two polarizations with two Al KIDs. The KIDs are designed with a half wavelength microstrip transmission line with parallel plate capacitors at the two ends. The resonance frequency range is 400 to 800 MHz. The readout feedline is also implemented in microstrip and has an impedance transformer from 50 Ohm to 9 Ohm at its input and output.
△ Less
Submitted 25 May, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Understanding and minimizing resonance frequency deviations on a 4-inch kilo-pixel kinetic inductance detector array
Authors:
S. Shu,
M. Calvo,
J. Goupy,
S. Leclercq,
A. Catalano,
A. Bideaud,
A. Monfardini,
E. F. C. Driessen
Abstract:
One of the advantages of kinetic inductance detectors is their intrinsic frequency domain multiplexing capability. However, fabrication imperfections usually give rise to resonance frequency deviations, which create frequency collision and limit the array yield. Here we study the resonance frequency deviation of a 4-inch kilo-pixel lumped-element kinetic inductance detector (LEKID) array using opt…
▽ More
One of the advantages of kinetic inductance detectors is their intrinsic frequency domain multiplexing capability. However, fabrication imperfections usually give rise to resonance frequency deviations, which create frequency collision and limit the array yield. Here we study the resonance frequency deviation of a 4-inch kilo-pixel lumped-element kinetic inductance detector (LEKID) array using optical map**. Using the measured resonator dimensions and film thickness, the fractional deviation can be explained within $\pm 25\times 10^{-3}$, whereas the residual deviation is due to variation of electric film properties. Using the capacitor trimming technique, the fractional deviation is decreased by a factor of 14. The yield of the trimming process is found to be 97%. The map** yield, measured under a 110~K background, is improved from 69% to 76%, which can be further improved to 81% after updating our readout system. With the improvement in yield, the capacitor trimming technique may benefit future large-format LEKID arrays.
△ Less
Submitted 30 August, 2021; v1 submitted 28 May, 2021;
originally announced May 2021.
-
Nonlinearity and wideband parametric amplification in an NbTiN microstrip transmission line
Authors:
Shibo Shu,
Nikita Klimovich,
Byeong Ho Eom,
Andrew Beyer,
Ritoban Basu Thakur,
Henry Leduc,
Peter Day
Abstract:
The nonlinear response associated with the current dependence of the superconducting kinetic inductance was studied in capacitively shunted NbTiN microstrip transmission lines. It was found that the inductance per unit length of one microstrip line could be changed by up to 20% by applying a DC current, corresponding to a single pass time delay of 0.7 ns. To investigate nonlinear dissipation, Brag…
▽ More
The nonlinear response associated with the current dependence of the superconducting kinetic inductance was studied in capacitively shunted NbTiN microstrip transmission lines. It was found that the inductance per unit length of one microstrip line could be changed by up to 20% by applying a DC current, corresponding to a single pass time delay of 0.7 ns. To investigate nonlinear dissipation, Bragg reflectors were placed on either end of a section of this type of transmission line, creating resonances over a range of frequencies. From the change in the resonance linewidth and amplitude with DC current, the ratio of the reactive to the dissipative response of the line was found to be 788. The low dissipation makes these transmission lines suitable for a number of applications that are microwave and millimeter-wave band analogues of nonlinear optical processes. As an example, by applying a millimeter-wave pump tone, very wide band parametric amplification was observed between about 3 and 34 GHz. Use as a current variable delay line for an on-chip millimeter-wave Fourier transform spectrometer is also considered.
△ Less
Submitted 19 May, 2021; v1 submitted 28 February, 2021;
originally announced March 2021.
-
Matter flow method for alleviating checkerboard oscillations in triangular mesh SGH Lagrangian simulation
Authors:
Li Zhao,
Bo Xiao,
Ganghua Wang,
Haibo Zhao,
**song Bai,
Chunsheng Feng,
Shi Shu
Abstract:
When the SGH Lagrangian based on triangle mesh is used to simulate compressible hydrodynamics, because of the stiffness of triangular mesh, the problem of physical quantity cell-to-cell spatial oscillation (also called "checkerboard oscillation") is easy to occur. A matter flow method is proposed to alleviate the oscillation of physical quantities caused by triangular stiffness. The basic idea of…
▽ More
When the SGH Lagrangian based on triangle mesh is used to simulate compressible hydrodynamics, because of the stiffness of triangular mesh, the problem of physical quantity cell-to-cell spatial oscillation (also called "checkerboard oscillation") is easy to occur. A matter flow method is proposed to alleviate the oscillation of physical quantities caused by triangular stiffness. The basic idea of this method is to attribute the stiffness of triangle to the fact that the edges of triangle mesh can not do bending motion, and to compensate the effect of triangle edge bending motion by means of matter flow. Three effects are considered in our matter flow method: (1) transport of the mass, momentum and energy carried by the moving matter; (2) the work done on the element, since the flow of matter changes the specific volume of the grid element; (3) the effect of matter flow on the strain rate in the element. Numerical experiments show that the proposed matter flow method can effectively alleviate the spatial oscillation of physical quantities.
△ Less
Submitted 28 August, 2020;
originally announced August 2020.
-
Observing with NIKA2Pol from the IRAM 30m telescope. Early results on the commissioning phase
Authors:
A. Ritacco,
R. Adam,
P. Ade,
H. Ajeddig,
P. André,
A. Andrianasolo,
H. Aussel,
A. Beelen,
A. Benoît,
A. Bideaud,
O. Bourrion,
M. Calvo,
A. Catalano,
B. Comis,
M. De Petris,
F. -X. Désert,
S. Doyle,
E. F. C. Driessen,
A. Gomez,
J. Goupy,
F. Kéruzoré,
C. Kramer,
B. Ladjelate,
G. Lagache,
S. Leclercq
, et al. (19 additional authors not shown)
Abstract:
The NIKA2 polarization channel at 260 GHz (1.15 mm) has been proposed primarily to observe galactic star-forming regions and probe the critical scales between 0.01-0.05 pc at which magnetic field lines may channel the matter of interstellar filaments into growing dense cores. The NIKA2 polarimeter consists of a room temperature continuously rotating multi-mesh HWP and a cold polarizer that separat…
▽ More
The NIKA2 polarization channel at 260 GHz (1.15 mm) has been proposed primarily to observe galactic star-forming regions and probe the critical scales between 0.01-0.05 pc at which magnetic field lines may channel the matter of interstellar filaments into growing dense cores. The NIKA2 polarimeter consists of a room temperature continuously rotating multi-mesh HWP and a cold polarizer that separates the two orthogonal polarizations onto two 260 GHz KIDs arrays. We describe in this paper the preliminary results obtained during the most recent commissioning campaign performed in December 2018. We concentrate here on the analysis of the extended sources, while the observation of compact sources is presented in a companion paper [12]. We present preliminary NIKA2 polarization maps of the Crab nebula. We find that the integrated polarization intensity flux measured by NIKA2 is consistent with expectations.In terms of polarization angle, we are still limited by systematic uncertainties that will be further investigated in the forthcoming commissioning campaigns.
△ Less
Submitted 17 December, 2019;
originally announced December 2019.
-
Calibration and Performance of the NIKA2 camera at the IRAM 30-meter Telescope
Authors:
L. Perotto,
N. Ponthieu,
J. -F. Macías-Pérez,
R. Adam,
P. Ade,
P. André,
A. Andrianasolo,
H. Aussel,
A. Beelen,
A. Benoît,
S. Berta,
A. Bideaud,
O. Bourrion,
M. Calvo,
A. Catalano,
B. Comis,
M. De Petris,
F. -X. Désert,
S. Doyle,
E. F. C. Driessen,
P. García,
A. Gomez,
J. Goupy,
D. John,
F. Kéruzoré
, et al. (23 additional authors not shown)
Abstract:
NIKA2 is a dual-band millimetric continuum camera of 2900 Kinetic Inductance Detectors (KID), operating at $150$ and $260\,\rm{GHz}$, installed at the IRAM 30-meter telescope. We present the performance assessment of NIKA2 after one year of observation using a dedicated point-source calibration method, referred to as the \emph{baseline} method. Using a large data set acquired between January 2017…
▽ More
NIKA2 is a dual-band millimetric continuum camera of 2900 Kinetic Inductance Detectors (KID), operating at $150$ and $260\,\rm{GHz}$, installed at the IRAM 30-meter telescope. We present the performance assessment of NIKA2 after one year of observation using a dedicated point-source calibration method, referred to as the \emph{baseline} method. Using a large data set acquired between January 2017 and February 2018 that span the whole range of observing elevations and atmospheric conditions encountered at the IRAM 30-m telescope, we test the stability of the performance parameters. We report an instantaneous field of view (FOV) of 6.5' in diameter, filled with an average fraction of $84\%$ and $90\%$ of valid detectors at $150$ and $260\,\rm{GHz}$, respectively. The beam pattern is characterized by a FWHM of $17.6'' \pm 0.1''$ and $11.1''\pm 0.2''$, and a beam efficiency of $77\% \pm 2\%$ and $55\% \pm 3\%$ at $150$ and $260\,\rm{GHz}$, respectively. The rms calibration uncertainties are about $3\%$ at $150\,\rm{GHz}$ and $6\%$ at $260\,\rm{GHz}$. The absolute calibration uncertainties are of $5\%$ and the systematic calibration uncertainties evaluated at the IRAM 30-m reference Winter observing conditions are below $1\%$ in both channels. The noise equivalent flux density (NEFD) at $150$ and $260\,\rm{GHz}$ are of $9 \pm 1\, \rm{mJy}\cdot s^{1/2}$ and $30 \pm 3\, \rm{mJy}\cdot s^{1/2}$. This state-of-the-art performance confers NIKA2 with map** speeds of $1388 \pm 174$ and $111 \pm 11 \,\rm{arcmin}^2\cdot \rm{mJy}^{-2}\cdot \rm{h}^{-1}$ at $150$ and $260\,\rm{GHz}$. With these unique capabilities of fast dual-band map** at high (better that 18'') angular resolution, NIKA2 is providing an unprecedented view of the millimetre Universe.
△ Less
Submitted 21 January, 2020; v1 submitted 4 October, 2019;
originally announced October 2019.
-
PennyLane: Automatic differentiation of hybrid quantum-classical computations
Authors:
Ville Bergholm,
Josh Izaac,
Maria Schuld,
Christian Gogolin,
Shahnawaz Ahmed,
Vishnu Ajith,
M. Sohaib Alam,
Guillermo Alonso-Linaje,
B. AkashNarayanan,
Ali Asadi,
Juan Miguel Arrazola,
Utkarsh Azad,
Sam Banning,
Carsten Blank,
Thomas R Bromley,
Benjamin A. Cordier,
Jack Ceroni,
Alain Delgado,
Olivia Di Matteo,
Amintor Dusko,
Tanya Garg,
Diego Guala,
Anthony Hayes,
Ryan Hill,
Aroosa Ijaz
, et al. (43 additional authors not shown)
Abstract:
PennyLane is a Python 3 software framework for differentiable programming of quantum computers. The library provides a unified architecture for near-term quantum computing devices, supporting both qubit and continuous-variable paradigms. PennyLane's core feature is the ability to compute gradients of variational quantum circuits in a way that is compatible with classical techniques such as backpro…
▽ More
PennyLane is a Python 3 software framework for differentiable programming of quantum computers. The library provides a unified architecture for near-term quantum computing devices, supporting both qubit and continuous-variable paradigms. PennyLane's core feature is the ability to compute gradients of variational quantum circuits in a way that is compatible with classical techniques such as backpropagation. PennyLane thus extends the automatic differentiation algorithms common in optimization and machine learning to include quantum and hybrid computations. A plugin system makes the framework compatible with any gate-based quantum simulator or hardware. We provide plugins for hardware providers including the Xanadu Cloud, Amazon Braket, and IBM Quantum, allowing PennyLane optimizations to be run on publicly accessible quantum devices. On the classical front, PennyLane interfaces with accelerated machine learning libraries such as TensorFlow, PyTorch, JAX, and Autograd. PennyLane can be used for the optimization of variational quantum eigensolvers, quantum approximate optimization, quantum machine learning models, and many other applications.
△ Less
Submitted 29 July, 2022; v1 submitted 12 November, 2018;
originally announced November 2018.
-
Increased multiplexing of superconducting microresonator arrays by post-characterization adaptation of the on-chip capacitors
Authors:
Shibo Shu,
Martino Calvo,
Johannes Goupy,
Samuel Leclercq,
Andrea Catalano,
Aurelien Bideaud,
Alessandro Monfardini,
Eduard F. C. Driessen
Abstract:
We present an interdigitated capacitor trimming technique for fine-tuning the resonance frequency of superconducting microresonators and increasing the multiplexing factor. We first measure the optical response of the array with a beam map** system to link all resonances to their physical resonators. Then a new set of resonance frequencies with uniform spacing and higher multiplexing factor is d…
▽ More
We present an interdigitated capacitor trimming technique for fine-tuning the resonance frequency of superconducting microresonators and increasing the multiplexing factor. We first measure the optical response of the array with a beam map** system to link all resonances to their physical resonators. Then a new set of resonance frequencies with uniform spacing and higher multiplexing factor is designed. We use simulations to deduce the lengths that we should trim from the capacitor fingers in order to shift the resonances to the desired frequencies. The sample is then modified using contact lithography and re-measured using the same setup. We demonstrate this technique on a 112-pixel aluminum lumped-element kinetic-inductance detector array. Before trimming, the resonance frequency deviation of this array is investigated. The variation of the inductor width plays the main role for the deviation. After trimming, the mean fractional frequency error for identified resonators is -6.4e-4, with a standard deviation of 1.8e-4. The final optical yield is increased from 70.5% to 96.7% with no observable crosstalk beyond -15 dB during map**. This technique could be applied to other photon-sensitive superconducting microresonator arrays for increasing the yield and multiplexing factor.
△ Less
Submitted 13 August, 2018; v1 submitted 11 August, 2018;
originally announced August 2018.
-
On the network analysis of the state space of discrete dynamical systems
Authors:
Cheng Xu,
Chengqing Li,
**hu Lü,
Shi Shu
Abstract:
This paper discusses the letter entitled "Network analysis of the state space of discrete dynamical systems" by A. Shreim et al. [Physical Review Letters, 98, 198701 (2007)]. We found that some theoretical analyses are wrong and the proposed indicators based on two parameters of the state-map** network cannot discriminate the dynamical complexity of the discrete dynamical systems composed of a 1…
▽ More
This paper discusses the letter entitled "Network analysis of the state space of discrete dynamical systems" by A. Shreim et al. [Physical Review Letters, 98, 198701 (2007)]. We found that some theoretical analyses are wrong and the proposed indicators based on two parameters of the state-map** network cannot discriminate the dynamical complexity of the discrete dynamical systems composed of a 1-D Cellular Automata.
△ Less
Submitted 1 April, 2017; v1 submitted 15 November, 2016;
originally announced November 2016.
-
PIBM: Particulate immersed boundary method for fluid-particle interaction problems
Authors:
Hao Zhang,
F. Xavier Trias,
Assensi Oliva,
Dongmin Yang,
Yuanqiang Tan,
Shi Shu,
Yong Sheng
Abstract:
It is well known that the number of particles should be scaled up to enable industrial scale simulation. The calculations are more computationally intensive when the motion of the surrounding fluid is considered. Besides the advances in computer hardware and numerical algorithms, the coupling scheme also plays an important role on the computational efficiency. In this study, a particle immersed bo…
▽ More
It is well known that the number of particles should be scaled up to enable industrial scale simulation. The calculations are more computationally intensive when the motion of the surrounding fluid is considered. Besides the advances in computer hardware and numerical algorithms, the coupling scheme also plays an important role on the computational efficiency. In this study, a particle immersed boundary method (PIBM) for simulating the fluid-particle multiphase flow was presented and assessed in both two- and three-dimensional applications. The idea behind PIBM derives from the conventional momentum exchange-based immersed boundary method (IBM) by treating each Lagrangian point as a solid particle. This treatment enables LBM to be coupled with fine particles residing within a particular grid cell. Compared with the conventional IBM, dozens of times speedup in two-dimensional simulation and hundreds of times in three-dimensional simulation can be expected under the same particle and mesh number. Numerical simulations of particle sedimentation in the Newtonian flows were conducted based on a combined lattice Boltzmann method - particle immersed boundary method - discrete element method scheme, showing that the PIBM can capture the feature of particulate flows in fluid and is indeed a promising scheme for the solution of the fluid-particle interaction problems.
△ Less
Submitted 25 July, 2014;
originally announced July 2014.
-
Numerical Study of Geometric Multigrid Methods on CPU--GPU Heterogeneous Computers
Authors:
Chunsheng Feng,
Shi Shu,
**chao Xu,
Chen-Song Zhang
Abstract:
The geometric multigrid method (GMG) is one of the most efficient solving techniques for discrete algebraic systems arising from elliptic partial differential equations. GMG utilizes a hierarchy of grids or discretizations and reduces the error at a number of frequencies simultaneously. Graphics processing units (GPUs) have recently burst onto the scientific computing scene as a technology that ha…
▽ More
The geometric multigrid method (GMG) is one of the most efficient solving techniques for discrete algebraic systems arising from elliptic partial differential equations. GMG utilizes a hierarchy of grids or discretizations and reduces the error at a number of frequencies simultaneously. Graphics processing units (GPUs) have recently burst onto the scientific computing scene as a technology that has yielded substantial performance and energy-efficiency improvements. A central challenge in implementing GMG on GPUs, though, is that computational work on coarse levels cannot fully utilize the capacity of a GPU. In this work, we perform numerical studies of GMG on CPU--GPU heterogeneous computers. Furthermore, we compare our implementation with an efficient CPU implementation of GMG and with the most popular fast Poisson solver, Fast Fourier Transform, in the cuFFT library developed by NVIDIA.
△ Less
Submitted 11 January, 2013; v1 submitted 21 August, 2012;
originally announced August 2012.
-
Metallic rugate structures for perfect absorbers in visible and near-infrared regions
Authors:
Shiwei Shu,
Yang Yang Li
Abstract:
Metallic rugate structures are theoretically investigated for achieving perfect absorption in the visible and near-infrared regions. Our model builds on nanoporous metal films whose porosity (volume fraction of voids) follows a sine-wave along the film thickness. By setting the initial phase of porosity at the top surface as 0, perfect absorption is obtained. The impacts of various structural para…
▽ More
Metallic rugate structures are theoretically investigated for achieving perfect absorption in the visible and near-infrared regions. Our model builds on nanoporous metal films whose porosity (volume fraction of voids) follows a sine-wave along the film thickness. By setting the initial phase of porosity at the top surface as 0, perfect absorption is obtained. The impacts of various structural parameters on the characteristic absorption behaviors are studied. Furthermore, multiple peaks or bands with high-absorption can be achieved by integrating several periodicities in one structure. The rugate absorbers show perfect or near-perfect absorption for TE and TM polarizations and large incident angles.
△ Less
Submitted 28 May, 2012;
originally announced May 2012.
-
High speed 3-D Surface Profilometry Employing Trapezoidal HSI Phase Shifting Method with Multi-band Calibration for Colour Surface Reconstruction
Authors:
L C Chen,
X L Nguyen,
Y S Shu
Abstract:
This article presents a new optical measurement method employing a HSI (Hue, Saturation and Intensity) colour model to form trapezoidal structured patterns for morphology reconstruction of a measured object at a high speed. Profilometry on objects having non-monochromatic surfaces is considered as one of the remaining most challenges faced by the currently existing structured-light projection meth…
▽ More
This article presents a new optical measurement method employing a HSI (Hue, Saturation and Intensity) colour model to form trapezoidal structured patterns for morphology reconstruction of a measured object at a high speed. Profilometry on objects having non-monochromatic surfaces is considered as one of the remaining most challenges faced by the currently existing structured-light projection methods since the surface reflectivity to red, green and blue light may vary significantly. To address this, an innovative colour calibration method for hue component is developed to determine the accurate reflectivity response of the measured surface. The trapezoidal colour pattern is calibrated to compensate the hue-shifted quantity induced by the reflective characteristics of the object's surface. The developed method can reconstruct precise 3-D surface models from objects by acquiring a single-shot image, which can achieve high-speed profilometry and avoid in-situ potential measurement disturbances such as environmental vibration. To verify the feasibility of the developed methodology, some experiments were conducted to confirm that the measurement accuracy can be controlled within 2.5% of the overall measurement range and the repeatability of 3.0% within +/- 3*sigma can be achieved.
△ Less
Submitted 7 August, 2010;
originally announced August 2010.
-
Acceleration for the mu+ mu- Collider
Authors:
D. Summers,
D. Neuffer,
Q. S. Shu,
E. Willen
Abstract:
We discuss possible acceleration scenarios and methods for a mu+ mu- collider. The accelerator must take the beams from ~100 MeV to 2 TeV within the muon lifetime (2.2 x 10**(-6) E(mu)/m(mu) uS), while compressing bunches of 10**(12) muons from m to cm bunch lengths. Linac, recirculating linac, and very rapid-cycling synchrotron approaches are studied. Multiple recirculating linac approaches are…
▽ More
We discuss possible acceleration scenarios and methods for a mu+ mu- collider. The accelerator must take the beams from ~100 MeV to 2 TeV within the muon lifetime (2.2 x 10**(-6) E(mu)/m(mu) uS), while compressing bunches of 10**(12) muons from m to cm bunch lengths. Linac, recirculating linac, and very rapid-cycling synchrotron approaches are studied. Multiple recirculating linac approaches are matched to the muon lifetime and appear readily feasible. Rapid-cycling approaches require innovations in magnet designs and layouts, but could be much more affordable.
△ Less
Submitted 1 September, 2001;
originally announced September 2001.