-
Implementation of Immersed Boundaries through Volume Penalization in the Industrial Aeronautical Solver CODA
Authors:
Jonatan Nunez,
David Huergo,
Suyash Shrestha,
Esteban Ferrer,
Eusebio Valero,
Diego Lodares,
Juan Guerra,
Juan Florenciano
Abstract:
In this work, we present the implementation and validation of the immersed boundary volume penalization methods in the CFD solver CODA. Our goal is the modelling and simulation of turbulent fluid flowsin complex 3D aerodynamic configuration through the numerical solution of the Reynolds-Averaged Navier-Stokes equations using the Spalart-Allmaras turbulent model. To do that, an efficient immerse bo…
▽ More
In this work, we present the implementation and validation of the immersed boundary volume penalization methods in the CFD solver CODA. Our goal is the modelling and simulation of turbulent fluid flowsin complex 3D aerodynamic configuration through the numerical solution of the Reynolds-Averaged Navier-Stokes equations using the Spalart-Allmaras turbulent model. To do that, an efficient immerse boundary method, together with an efficient preprocessing tool for the construction of unstructured hexahedral meshes with adaptive mesh refinement around immersed geometries has been developed. We report several numerical computations, including subsonic flow past a NACA0012 airfoil, subsonic flow past an MDA30P30N multi-element airfoil and subsonic flow around the NASA high-lift CRM aircraft. These simulations have been performed in the CODA solver with a second-order finite volume scheme as spatial discretization and an implicit backward-Euler scheme based on the matrix-free GMRES block-Jacobi iterative method. The reported numerical simulations are in very good agreement with their corresponding experimental data.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
High Energy Physics in Africa, Latin America and other develo** regions
Authors:
Kétévi A. Assamagan,
Johan Sebastian Bonilla,
Claudio Dib,
Azwinndini Muronga,
Heath B. O'Connell,
Rogerio Rosenfeld,
Suyog Shrestha
Abstract:
We summarize the current status of high energy physics (HEP) in Africa, Latin America, and other develo** regions
We summarize the current status of high energy physics (HEP) in Africa, Latin America, and other develo** regions
△ Less
Submitted 17 October, 2023; v1 submitted 29 August, 2023;
originally announced August 2023.
-
Linking Alternative Fuel Vehicles Adoption with Socioeconomic Status and Air Quality Index
Authors:
Anuradha Singh,
Jyoti Yadav,
Sarahana Shrestha,
Aparna S. Varde
Abstract:
This is a study on the potential widespread usage of alternative fuel vehicles, linking them with the socio-economic status of the respective consumers as well as the impact on the resulting air quality index. Research in this area aims to leverage machine learning techniques in order to promote appropriate policies for the proliferation of alternative fuel vehicles such as electric vehicles with…
▽ More
This is a study on the potential widespread usage of alternative fuel vehicles, linking them with the socio-economic status of the respective consumers as well as the impact on the resulting air quality index. Research in this area aims to leverage machine learning techniques in order to promote appropriate policies for the proliferation of alternative fuel vehicles such as electric vehicles with due justice to different population groups. Pearson correlation coefficient is deployed in the modeling the relationships between socio-economic data, air quality index and data on alternative fuel vehicles. Linear regression is used to conduct predictive modeling on air quality index as per the adoption of alternative fuel vehicles, based on socio-economic factors. This work exemplifies artificial intelligence for social good.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Observation of the Surface Layer of Lithium Metal using In Situ Spectroscopy
Authors:
Ambrose Seo,
Andrew Meyer,
Sujan Shrestha,
Ming Wang,
Xingcheng Xiao,
Yang-Tse Cheng
Abstract:
We have investigated the surface of lithium metal using x-ray photoemission spectroscopy and optical spectroscopic ellipsometry. Even if we prepare the surface of lithium metal rigorously by chemical cleaning and mechanical polishing inside a glovebox, both spectroscopic investigations show the existence of a few tens of nanometer-thick surface layers, consisting of lithium oxides and lithium carb…
▽ More
We have investigated the surface of lithium metal using x-ray photoemission spectroscopy and optical spectroscopic ellipsometry. Even if we prepare the surface of lithium metal rigorously by chemical cleaning and mechanical polishing inside a glovebox, both spectroscopic investigations show the existence of a few tens of nanometer-thick surface layers, consisting of lithium oxides and lithium carbonates. When lithium metal is exposed to room air (~50% moisture), in situ real-time monitoring of optical spectra indicates that the surface layer grows at a rate of approximately 24 nm/min, presumably driven by an interface-controlled process. Our results hint that surface-layer-free lithium metals are formidable to achieve by a simple cleaning/polishing method, suggesting that the initial interface between lithium metal electrodes and solid-state electrolytes in fabricated lithium metal batteries can differ from an ideal lithium/electrolyte contact.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
Technical design of the phase I Mu3e experiment
Authors:
K. Arndt,
H. Augustin,
P. Baesso,
N. Berger,
F. Berg,
C. Betancourt,
D. Bortoletto,
A. Bravar,
K. Briggl,
D. vom Bruch,
A. Buonaura,
F. Cadoux,
C. Chavez Barajas,
H. Chen,
K. Clark,
P. Cooke,
S. Corrodi,
A. Damyanova,
Y. Demets,
S. Dittmeier,
P. Eckert,
F. Ehrler,
D. Fahrni,
S. Gagneur,
L. Gerritzen
, et al. (80 additional authors not shown)
Abstract:
The Mu3e experiment aims to find or exclude the lepton flavour violating decay $μ\rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the p…
▽ More
The Mu3e experiment aims to find or exclude the lepton flavour violating decay $μ\rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the phase~I Mu3e detector. The high rate of up to $10^{8}$ muon decays per second and the low momenta of the decay electrons and positrons pose a unique set of challenges, which we tackle using an ultra thin tracking detector based on high-voltage monolithic active pixel sensors combined with scintillating fibres and tiles for precise timing measurements.
△ Less
Submitted 26 August, 2021; v1 submitted 24 September, 2020;
originally announced September 2020.
-
Active Nonlocal Metasurfaces
Authors:
Stephanie C. Malek,
Adam C. Overvig,
Sajan Shrestha,
Nanfang Yu
Abstract:
Actively tunable and reconfigurable wavefront sha** by optical metasurfaces poses a significant technical challenge often requiring unconventional materials engineering and nanofabrication. Most wavefront-sha** metasurfaces can be considered 'local' in that their operation depends on the responses of individual meta-units. In contrast, 'nonlocal' metasurfaces function based on the modes suppor…
▽ More
Actively tunable and reconfigurable wavefront sha** by optical metasurfaces poses a significant technical challenge often requiring unconventional materials engineering and nanofabrication. Most wavefront-sha** metasurfaces can be considered 'local' in that their operation depends on the responses of individual meta-units. In contrast, 'nonlocal' metasurfaces function based on the modes supported by many adjacent meta-units, resulting in sharp spectral features but typically no spatial control of the outgoing wavefront. Recently, nonlocal metasurfaces based on quasi-bound states in the continuum have been shown to produce designer wavefronts only across the narrow bandwidth of the supported Fano resonance. Here, we leverage the enhanced light-matter interactions associated with sharp Fano resonances to explore the active modulation of optical spectra and wavefronts by refractive index tuning and mechanical stretching. We experimentally demonstrate proof-of-principle thermo-optically tuned nonlocal metasurfaces made of silicon, and numerically demonstrate nonlocal metasurfaces that thermo-optically switch between distinct wavefront shapes. This meta-optics platform for thermally reconfigurable wavefront-sha** requires neither unusual materials and fabrication nor active control of individual meta-units.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
Effects of substrate anisotropy and edge diffusion on submonolayer growth during molecular beam epitaxy: A Kinetic Monte Carlo study
Authors:
Jagannath Devkota,
Shankar P. Shrestha
Abstract:
We have performed Kinetic Monte Carlo simulation work to study the effect of diffusion anisotropy, bonding anisotropy and edge diffusion on island formation at different temperatures during the sub-monolayer film growth in Molecular Beam Epitaxy. We use simple cubic solid on solid model and event based Bortz, Kalos and Labowitch (BKL) algorithm on the Kinetic Monte Carlo method to simulate the phy…
▽ More
We have performed Kinetic Monte Carlo simulation work to study the effect of diffusion anisotropy, bonding anisotropy and edge diffusion on island formation at different temperatures during the sub-monolayer film growth in Molecular Beam Epitaxy. We use simple cubic solid on solid model and event based Bortz, Kalos and Labowitch (BKL) algorithm on the Kinetic Monte Carlo method to simulate the physical phenomena. We have found that the island morphology and growth exponent are found to be influenced by substrate anisotropy as well as edge diffusion, however they do not play a significant role in island elongation. The growth exponent and island size distribution are observed to be influenced by substrate anisotropy but are negligibly influenced by edge diffusion. We have found fractal islands when edge diffusion is excluded and compact islands when edge diffusion is included.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
Study on Sub monolayer Epitaxy Growth under Anisotropic Detachment
Authors:
Jagannath Devkota,
Shankar P. Shrestha
Abstract:
We have performed Kinetic Monte Carlo simulation to study the effect of diffusion anisotropy and bonding anisotropy on island formation at different temperatures during the sub-monolayer film growth in Molecular Beam Epitaxy. We use simple cubic solid on solid model and event based Bortz, Kalos and Labowitch (BKL) algorithm on Kinetic Monte Carlo method to simulate the physical phenomena. We have…
▽ More
We have performed Kinetic Monte Carlo simulation to study the effect of diffusion anisotropy and bonding anisotropy on island formation at different temperatures during the sub-monolayer film growth in Molecular Beam Epitaxy. We use simple cubic solid on solid model and event based Bortz, Kalos and Labowitch (BKL) algorithm on Kinetic Monte Carlo method to simulate the physical phenomena. We have found that surface anisotropy has no significant role on island elongation however it influences on the island morphology, growth exponent and island size distribution. Elongated islands were obtained when bonding anisotropy was included.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
Evaluation of Kyoto's Event-Driven X-ray Astronomical SOI Pixel Sensor with a Large Imaging Area
Authors:
Hideki Hayashi,
Takeshi Go Tsuru,
Takaaki Tanaka,
Hiroyuki Uchida,
Hideaki Matsumura,
Katsuhiro Tachibana,
Sodai Harada,
Ayaki Takeda,
Koji Mori,
Yusuke Nishioka,
Nobuaki Takebayashi,
Shoma Yokoyama,
Kohei Fukuda,
Yasuo Arai,
Ikuo Kurachi,
Shoji Kawahito,
Keiichiro Kagawa,
Keita Yasutomi,
Sumeet Shrestha,
Syunta Nakanishi,
Hiroki Kamehama,
Takayoshi Kohmura,
Kouichi Hagino,
Kousuke Negishi,
Kenji Oono
, et al. (1 additional authors not shown)
Abstract:
We have been develo** monolithic active pixel sensors, named ``XRPIX'', based on the silicon-on-insulator (SOI) pixel technology for future X-ray astronomy satellites. XRPIX has the function of event trigger and hit address outputs. This function allows us to read out analog signals only of hit pixels on trigger timing, which is referred to as the event-driven readout mode. Recently, we processe…
▽ More
We have been develo** monolithic active pixel sensors, named ``XRPIX'', based on the silicon-on-insulator (SOI) pixel technology for future X-ray astronomy satellites. XRPIX has the function of event trigger and hit address outputs. This function allows us to read out analog signals only of hit pixels on trigger timing, which is referred to as the event-driven readout mode. Recently, we processed ``XRPIX5b'' with the largest imaging area of 21.9~mm $\times$ 13.8~mm in the XRPIX series. X-ray spectra are successfully obtained from all the pixels, and the readout noise is 46~e$^-$~(rms) in the frame readout mode. The gain variation was measured to be 1.2\%~(FWHM) among the pixels. We successfully obtain the X-ray image in the event-driven readout mode.
△ Less
Submitted 29 April, 2019;
originally announced April 2019.
-
Selection Rules for Quasi-Bound States in the Continuum
Authors:
Adam C. Overvig,
Stephanie C. Malek,
Michael J. Carter,
Sajan Shrestha,
Nanfang Yu
Abstract:
Photonic crystal slabs (PCSs) are a well-studied class of devices known to support optical Fano resonances for light normally incident to the slab, useful for narrowband filters, modulators, and nonlinear photonic devices. In shallow-etched PCSs the linewidth of the resonances is easily controlled by tuning the etching depth. This design strength comes at the cost of large device footprint due to…
▽ More
Photonic crystal slabs (PCSs) are a well-studied class of devices known to support optical Fano resonances for light normally incident to the slab, useful for narrowband filters, modulators, and nonlinear photonic devices. In shallow-etched PCSs the linewidth of the resonances is easily controlled by tuning the etching depth. This design strength comes at the cost of large device footprint due to the poor in-plane localization of optical energy. In fully-etched PCSs realized in high index contrast material systems, the in-plane localization is greatly improved, but the command over linewidth suffers. This disadvantage in fully-etched PCSs, also known as high contrast gratings (HCGs), can be overcome by accessing symmetry-protected Bound States in the Continuum (BICs). By perturbing an HCG, the BIC may be excited from the free space with quality factor showing an inverse squared dependence on the magnitude of the perturbation, while inheriting the excellent in-plane localization of their unperturbed counterparts. Here, we report an exhaustive catalog of the selection rules (if and to which free space polarization coupling occurs) of symmetry-protected BICs controlled by in-plane symmetry breaking in six types of two-dimensional PCS lattices. The chosen lattices allow access to the three highest symmetry mode classes of unperturbed square and hexagonal PCSs. The restriction to in-plane symmetry breaking allows for manufacturing devices with simple lithographic fabrication techniques in comparison to out-of-plane symmetry breaking, useful for practical applications. The approach reported provides a high-level roadmap for designing PCSs supporting controllable sharp spectral features with minimal device footprints using a mature fabrication platform.
△ Less
Submitted 29 May, 2020; v1 submitted 26 March, 2019;
originally announced March 2019.
-
Dielectric Metasurfaces for Complete and Independent Control of Optical Amplitude and Phase
Authors:
Adam C. Overvig,
Sajan Shrestha,
Stephanie C. Malek,
Ming Lu,
Aaron Stein,
Changxi Zheng,
Nanfang Yu
Abstract:
Metasurfaces are optically thin metamaterials that promise complete control of the wavefront of light but are primarily used to control only the phase of light. Here, we present an approach, simple in concept and in practice, that uses meta-atoms with a varying degree of form birefringence and rotation angles to create high-efficiency dielectric metasurfaces that control both the optical amplitude…
▽ More
Metasurfaces are optically thin metamaterials that promise complete control of the wavefront of light but are primarily used to control only the phase of light. Here, we present an approach, simple in concept and in practice, that uses meta-atoms with a varying degree of form birefringence and rotation angles to create high-efficiency dielectric metasurfaces that control both the optical amplitude and phase at one or two frequencies. This opens up applications in computer-generated holography, allowing faithful reproduction of both the phase and amplitude of a target holographic scene without the iterative algorithms required in phase-only holography. We demonstrate all-dielectric metasurface holograms with independent and complete control of the amplitude and phase at up to two optical frequencies simultaneously to generate two- and three-dimensional holographic objects. We show that phase-amplitude metasurfaces enable a few features not attainable in phase-only holography; these include creating artifact-free two-dimensional holographic images, encoding phase and amplitude profiles separately at the object plane, encoding intensity profiles at the metasurface and object planes separately, and controlling the surface textures of three-dimensional holographic objects.
△ Less
Submitted 5 September, 2019; v1 submitted 1 March, 2019;
originally announced March 2019.
-
Performance of SOI Pixel Sensors Developed for X-ray Astronomy
Authors:
Takaaki Tanaka,
Takeshi Go Tsuru,
Hiroyuki Uchida,
Sodai Harada,
Tomoyuki Okuno,
Kazuho Kayama,
Yuki Amano,
Hideaki Matsumura,
Ayaki Takeda,
Koji Mori,
Yusuke Nishioka,
Kohei Fukuda,
Takahiro Hida,
Masataka Yukumoto,
Yasuo Arai,
Ikuo Kurachi,
Shoji Kawahito,
Keiichiro Kagawa,
Keita Yasutomi,
Sumeet Shrestha,
Syunta Nakanishi,
Hiroki Kamehama,
Takayoshi Kohmura,
Kouichi Hagino,
Kousuke Negishi
, et al. (2 additional authors not shown)
Abstract:
We have been develo** monolithic active pixel sensors for X-rays based on the silicon-on-insulator technology. Our device consists of a low-resistivity Si layer for readout CMOS electronics, a high-resistivity Si sensor layer, and a SiO$_2$ layer between them. This configuration allows us both high-speed readout circuits and a thick (on the order of $100~μ{\rm m}$) depletion layer in a monolithi…
▽ More
We have been develo** monolithic active pixel sensors for X-rays based on the silicon-on-insulator technology. Our device consists of a low-resistivity Si layer for readout CMOS electronics, a high-resistivity Si sensor layer, and a SiO$_2$ layer between them. This configuration allows us both high-speed readout circuits and a thick (on the order of $100~μ{\rm m}$) depletion layer in a monolithic device. Each pixel circuit contains a trigger output function, with which we can achieve a time resolution of $\lesssim 10~μ{\rm s}$. One of our key development items is improvement of the energy resolution. We recently fabricated a device named XRPIX6E, to which we introduced a pinned depleted diode (PDD) structure. The structure reduces the capacitance coupling between the sensing area in the sensor layer and the pixel circuit, which degrades the spectral performance. With XRPIX6E, we achieve an energy resolution of $\sim 150$~eV in full width at half maximum for 6.4-keV X-rays. In addition to the good energy resolution, a large imaging area is required for practical use. We developed and tested XRPIX5b, which has an imaging area size of $21.9~{\rm mm} \times 13.8~{\rm mm}$ and is the largest device that we ever fabricated. We successfully obtain X-ray data from almost all the $608 \times 384$ pixels with high uniformity.
△ Less
Submitted 14 December, 2018;
originally announced December 2018.
-
Kyoto's Event-Driven X-ray Astronomy SOI pixel sensor for the FORCE mission
Authors:
Takeshi G. Tsuru,
Hideki Hayashi,
Katsuhiro Tachibana,
Sodai Harada,
Hiroyuki Uchida,
Takaaki Tanaka,
Yasuo Arai,
Ikuo Kurachi,
Koji Mori,
Ayaki Takeda,
Yusuke Nishioka,
Nobuaki Takebayashi,
Shoma Yokoyama,
Kohei Fukuda,
Takayoshi Kohmura,
Kouichi Hagino,
Kenji Ohno,
Kohsuke Negishi,
Keigo Yarita,
Shoji Kawahito,
Keiichiro Kagawa,
Keita Yasutomi,
Sumeet Shrestha,
Shunta Nakanishi,
Hiroki Kamehama
, et al. (1 additional authors not shown)
Abstract:
We have been develo** monolithic active pixel sensors, X-ray Astronomy SOI pixel sensors, XRPIXs, based on a Silicon-On-Insulator (SOI) CMOS technology as soft X-ray sensors for a future Japanese mission, FORCE (Focusing On Relativistic universe and Cosmic Evolution). The mission is characterized by broadband (1-80 keV) X-ray imaging spectroscopy with high angular resolution ($<15$~arcsec), with…
▽ More
We have been develo** monolithic active pixel sensors, X-ray Astronomy SOI pixel sensors, XRPIXs, based on a Silicon-On-Insulator (SOI) CMOS technology as soft X-ray sensors for a future Japanese mission, FORCE (Focusing On Relativistic universe and Cosmic Evolution). The mission is characterized by broadband (1-80 keV) X-ray imaging spectroscopy with high angular resolution ($<15$~arcsec), with which we can achieve about ten times higher sensitivity in comparison to the previous missions above 10~keV. Immediate readout of only those pixels hit by an X-ray is available by an event trigger output function implemented in each pixel with the time resolution higher than $10~{\rm μsec}$ (Event-Driven readout mode). It allows us to do fast timing observation and also reduces non-X-ray background dominating at a high X-ray energy band above 5--10~keV by adopting an anti-coincidence technique. In this paper, we introduce our latest results from the developments of the XRPIXs. (1) We successfully developed a 3-side buttable back-side illumination device with an imaging area size of 21.9~mm$\times$13.8~mm and an pixel size of $36~{\rm μm} \times 36~{\rm μm}$. The X-ray throughput with the device reaches higher than 0.57~kHz in the Event-Driven readout mode. (2) We developed a device using the double SOI structure and found that the structure improves the spectral performance in the Event-Driven readout mode by suppressing the capacitive coupling interference between the sensor and circuit layers. (3) We also developed a new device equipped with the Pinned Depleted Diode structure and confirmed that the structure reduces the dark current generated at the interface region between the sensor and the SiO$_2$ insulator layers. The device shows an energy resolution of 216~eV in FWHM at 6.4~keV in the Event-Driven readout mode.
△ Less
Submitted 29 July, 2018;
originally announced July 2018.
-
Thermophoresis of Janus particles at large Knudsen numbers
Authors:
Tobias Baier,
Sudarshan Tiwari,
Samir Shrestha,
Axel Klar,
Steffen Hardt
Abstract:
The force and torque on a Janus sphere moving in a rarefied gas with a thermal gradient are calculated. The regime of large Knudsen number is considered, with the momenta of im**ing gas molecules either obtained from a Chapman-Enskog distribution or from a binary Maxwellian distribution between two opposing parallel plates at different temperature. The reflection properties at the surface of the…
▽ More
The force and torque on a Janus sphere moving in a rarefied gas with a thermal gradient are calculated. The regime of large Knudsen number is considered, with the momenta of im**ing gas molecules either obtained from a Chapman-Enskog distribution or from a binary Maxwellian distribution between two opposing parallel plates at different temperature. The reflection properties at the surface of the Janus particle are characterized by accommodation coefficients having constant but dissimilar values on each hemisphere. It is shown that the Janus particle preferentially orients such that the hemisphere with a larger accommodation coefficient points towards the lower temperature. The thermophoretic velocity of the particle is computed, and the influence of the thermophoretic motion on the magnitude of the torque responsible for the particle orientation is studied. The analytical calculations are supported by Direct Simulation Monte Carlo results, extending the scope of the study towards smaller Knudsen numbers. The results shed light on the efficiency of oriented deposition of nanoparticles from the gas phase onto a cold surface.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Efficiency and timing performance of the MuPix7 high-voltage monolithic active pixel sensor
Authors:
Heiko Augustin,
Niklaus Berger,
Sebastian Dittmeier,
Carsten Grzesik,
Jan Hammerich,
Ulrich Hartenstein,
Qinhua Huang,
Lennart Huth,
David Maximilian Immig,
Moritz Kiehn,
Alexandr Kozlinskiy,
Frank Meier Aeschbacher,
Annie Meneses González,
Ivan Perić,
Ann-Kathrin Perrevoort,
André Schöning,
Shruti Shrestha,
Dorothea vom Bruch,
Frederik Wauters,
Dirk Wiedner
Abstract:
The MuPix7 is a prototype high voltage monolithic active pixel sensor with 103 times 80 um2 pixels thinned to 64 um and incorporating the complete read-out circuitry including a 1.25 Gbit/s differential data link. Using data taken at the DESY electron test beam, we demonstrate an efficiency of 99.3% and a time resolution of 14 ns. The efficiency and time resolution are studied with sub-pixel resol…
▽ More
The MuPix7 is a prototype high voltage monolithic active pixel sensor with 103 times 80 um2 pixels thinned to 64 um and incorporating the complete read-out circuitry including a 1.25 Gbit/s differential data link. Using data taken at the DESY electron test beam, we demonstrate an efficiency of 99.3% and a time resolution of 14 ns. The efficiency and time resolution are studied with sub-pixel resolution and reproduced in simulations.
△ Less
Submitted 30 June, 2018; v1 submitted 5 March, 2018;
originally announced March 2018.
-
MuPix7 - A fast monolithic HV-CMOS pixel chip for Mu3e
Authors:
H. Augustin,
N. Berger,
S. Dittmeier,
J. Hammerich,
U. Hartenstein,
Q. Huang,
L. Huth,
D. Immig,
A. Kozlinskiy,
F. Meier Aeschbacher,
I. Perić,
A. -K. Perrevoort,
A. Schöning,
S. Shrestha,
I. Sorokin,
A. Tyukin,
D. vom Bruch,
F. Wauters,
D. Wiedner,
M. Zimmermann
Abstract:
The MuPix7 chip is a monolithic HV-CMOS pixel chip, thinned down to 50 μm. It provides continuous self-triggered, non-shuttered readout at rates up to 30 Mhits/chip of 3x3 mm^2 active area and a pixel size of 103x80 μm^2. The hit efficiency depends on the chosen working point. Settings with a power consumption of 300 mW/cm^2 allow for a hit efficiency >99.5%. A time resolution of 14.2 ns (Gaussian…
▽ More
The MuPix7 chip is a monolithic HV-CMOS pixel chip, thinned down to 50 μm. It provides continuous self-triggered, non-shuttered readout at rates up to 30 Mhits/chip of 3x3 mm^2 active area and a pixel size of 103x80 μm^2. The hit efficiency depends on the chosen working point. Settings with a power consumption of 300 mW/cm^2 allow for a hit efficiency >99.5%. A time resolution of 14.2 ns (Gaussian sigma) is achieved. Latest results from 2016 test beam campaigns are shown.
△ Less
Submitted 10 October, 2016; v1 submitted 7 October, 2016;
originally announced October 2016.
-
The MuPix System-on-Chip for the Mu3e Experiment
Authors:
Heiko Augustin,
Niklaus Berger,
Sebastian Dittmeier,
Carsten Grzesik,
Jan Hammerich,
Qinhua Huang,
Lennart Huth,
Moritz Kiehn,
Alexandr Kozlinskiy,
Frank Meier Aeschbacher,
Ivan Perić,
Ann-Kathrin Perrevoort,
André Schöning,
Shruti Shrestha,
Dorothea vom Bruch,
Frederik Wauters,
Dirk Wiedner
Abstract:
Mu3e is a novel experiment searching for charged lepton flavor violation in the rare decay $μ^+ \rightarrow e^+e^-e^+$. Decay vertex position, decay time and particle momenta have to be precisely measured in order to reject both accidental and physics background. A silicon pixel tracker based on $50\,μ$m thin high voltage monolithic active pixel sensors (HV-MAPS) in a 1 T solenoidal magnetic field…
▽ More
Mu3e is a novel experiment searching for charged lepton flavor violation in the rare decay $μ^+ \rightarrow e^+e^-e^+$. Decay vertex position, decay time and particle momenta have to be precisely measured in order to reject both accidental and physics background. A silicon pixel tracker based on $50\,μ$m thin high voltage monolithic active pixel sensors (HV-MAPS) in a 1 T solenoidal magnetic field provides precise vertex and momentum information. The MuPix chip combines pixel sensor cells with integrated analog electronics and a periphery with a complete digital readout. The MuPix7 is the first HV-MAPS prototype implementing all functionalities of the final sensor including a readout state machine and high speed serialization with 1.25 Gbit/s data output, allowing for a streaming readout in parallel to the data taking. The observed efficiency of the MuPix7 chip including the full readout system is $\geq99\%$ in a high rate test beam.
△ Less
Submitted 14 October, 2016; v1 submitted 29 March, 2016;
originally announced March 2016.
-
A SOI-Based Low Noise and Wide Dynamic Range Event-Driven Detector for X-Ray Imaging
Authors:
Sumeet Shrestha,
Hiroki Kamehama,
Shoji Kawahito,
Keita Yasutomi,
Keiichiro Kagawa,
Ayaki Takeda,
Takeshi Go Tsuru,
Yasuo Arai
Abstract:
A low noise and wide dynamic range event driven detector for the detection of X-Ray energy is realized using 0.2 [um] Silicon on insulator (SOI) technology. Pixel circuits are divided into two parts; signal sensing circuit and event detection circuit. Event detection circuit is activated when X-Ray energy falls into the detector. In-pixel gain selection is implemented for the detection of a small…
▽ More
A low noise and wide dynamic range event driven detector for the detection of X-Ray energy is realized using 0.2 [um] Silicon on insulator (SOI) technology. Pixel circuits are divided into two parts; signal sensing circuit and event detection circuit. Event detection circuit is activated when X-Ray energy falls into the detector. In-pixel gain selection is implemented for the detection of a small signal and wide band of energy particle. Adaptive gain and capability of correlated double sampling (CDS) technique for the kTC noise canceling of charge detector realizes the low noise and high dynamic range event driven detector.
△ Less
Submitted 24 July, 2015;
originally announced July 2015.
-
Harnessing high-dimensional hyperentanglement through a biphoton frequency comb
Authors:
Zhenda Xie,
Tian Zhong,
Sajan Shrestha,
XinAn Xu,
Junlin Liang,
Yan-Xiao Gong,
Joshua C. Bienfang,
Alessandro Restelli,
Jeffrey H. Shapiro,
Franco N. C. Wong,
Chee Wei Wong
Abstract:
Quantum entanglement is a fundamental resource for secure information processing and communications, where hyperentanglement or high-dimensional entanglement has been separately proposed towards high data capacity and error resilience. The continuous-variable nature of the energy-time entanglement makes it an ideal candidate for efficient high-dimensional coding with minimal limitations. Here we d…
▽ More
Quantum entanglement is a fundamental resource for secure information processing and communications, where hyperentanglement or high-dimensional entanglement has been separately proposed towards high data capacity and error resilience. The continuous-variable nature of the energy-time entanglement makes it an ideal candidate for efficient high-dimensional coding with minimal limitations. Here we demonstrate the first simultaneous high-dimensional hyperentanglement using a biphoton frequency comb to harness the full potential in both energy and time domain. The long-postulated Hong-Ou-Mandel quantum revival is exhibited, with up to 19 time-bins, 96.5% visibilities. We further witness the high-dimensional energy-time entanglement through Franson revivals, which is observed periodically at integer time-bins, with 97.8% visibility. This qudit state is observed to simultaneously violate the generalized Bell inequality by up to 10.95 deviations while observing recurrent Clauser-Horne-Shimony-Holt S-parameters up to 2.76. Our biphoton frequency comb provides a platform in photon-efficient quantum communications towards the ultimate channel capacity through energy-time-polarization high-dimensional encoding.
△ Less
Submitted 13 June, 2015;
originally announced June 2015.
-
Development and Performance of Kyoto's X-ray Astronomical SOI pixel (SOIPIX) sensor
Authors:
Takeshi G. Tsuru,
Hideaki Matsumura,
Ayaki Takeda,
Takaaki Tanaka,
Shinya Nakashima,
Yasuo Arai,
Koji Mori,
Ryota Takenaka,
Yusuke Nishioka,
Takayoshi Kohmura,
Takaki Hatsui,
Takashi Kameshima,
Kyosuke Ozaki,
Yoshiki Kohmura,
Tatsuya Wagai,
Dai Takei,
Shoji Kawahito,
Keiichiro Kagawa,
Keita Yasutomi,
Hiroki Kamehama,
Sumeet Shrestha
Abstract:
We have been develo** monolithic active pixel sensors, known as Kyoto's X-ray SOIPIXs, based on the CMOS SOI (silicon-on-insulator) technology for next-generation X-ray astronomy satellites. The event trigger output function implemented in each pixel offers microsecond time resolution and enables reduction of the non-X-ray background that dominates the high X-ray energy band above 5--10 keV. A f…
▽ More
We have been develo** monolithic active pixel sensors, known as Kyoto's X-ray SOIPIXs, based on the CMOS SOI (silicon-on-insulator) technology for next-generation X-ray astronomy satellites. The event trigger output function implemented in each pixel offers microsecond time resolution and enables reduction of the non-X-ray background that dominates the high X-ray energy band above 5--10 keV. A fully depleted SOI with a thick depletion layer and back illumination offers wide band coverage of 0.3--40 keV. Here, we report recent progress in the X-ray SOIPIX development. In this study, we achieved an energy resolution of 300~eV (FWHM) at 6~keV and a read-out noise of 33~e- (rms) in the frame readout mode, which allows us to clearly resolve Mn-K$α$ and K$β$. Moreover, we produced a fully depleted layer with a thickness of $500~{\rm μm}$. The event-driven readout mode has already been successfully demonstrated.
△ Less
Submitted 20 August, 2014;
originally announced August 2014.
-
Numerical simulation of moving rigid body in rarefied gases
Authors:
Samir Shrestha,
Sudarshan Tiwari,
Axel Klar,
Steffen Hardt
Abstract:
In this paper we present a numerical scheme to simulate a moving rigid body with arbitrary shape suspended in a rarefied gas. The rarefied gas is simulated by solving the Boltzmann equation using a DSMC particle method. The motion of the rigid body is governed by the Newton-Euler equations, where the force and the torque on the rigid body is computed from the momentum transfer of the gas molecules…
▽ More
In this paper we present a numerical scheme to simulate a moving rigid body with arbitrary shape suspended in a rarefied gas. The rarefied gas is simulated by solving the Boltzmann equation using a DSMC particle method. The motion of the rigid body is governed by the Newton-Euler equations, where the force and the torque on the rigid body is computed from the momentum transfer of the gas molecules colliding with the body. On the other hand, the motion of the rigid body influences the gas flow in its surroundings. We validate the numerical results by testing the Einstein relation for Brownian motion of the suspended particle. The translational as well as the rotational degrees of freedom are taken into account. It is shown that the numerically computed translational and rotational diffusion coefficients converge to the theoretical values.
△ Less
Submitted 19 June, 2014;
originally announced June 2014.
-
Comparison of Fluid Attenuated Inversion Recovery Sequence with Spin Echo T2-Weighted MRI for Characterization of Brain Pathology
Authors:
Indra Dev Sahu,
Sheshkant Aryal,
Shanta Lal Shrestha,
Ram Kumar Ghimire
Abstract:
Twenty cases of different brain pathology have been studied via MRI using an open resistive magnet with magnetic field strength of 0.2 Tesla. The relative signal intensity with respect to the repetition time (TR) at fixed echo time (TE) 0.117 sec. has been studied. It was found that the signal intensity saturates for most lesions beyond a certain TR~6 sec in the T2 - weighted image. The signal i…
▽ More
Twenty cases of different brain pathology have been studied via MRI using an open resistive magnet with magnetic field strength of 0.2 Tesla. The relative signal intensity with respect to the repetition time (TR) at fixed echo time (TE) 0.117 sec. has been studied. It was found that the signal intensity saturates for most lesions beyond a certain TR~6 sec in the T2 - weighted image. The signal intensity differs with respect to the inversion time (TI) for fat and cerebrospinal fluid (CSF). It was found that the intensity is nulled for CSF at TI ~1.5 sec. and for Fat at TI~0.10 sec in the FLAIR imaging sequence. Thus the intensity of the lesions is qualitatively different for the two sequences. From the radiological diagnostic point of view, it was concluded that the FLAIR sequence is more useful for the detection of lesions compared to T2 sequences.
△ Less
Submitted 5 December, 2009; v1 submitted 21 November, 2009;
originally announced November 2009.
