-
Fluorescence Imaging of Individual Ions and Molecules in Pressurized Noble Gases for Barium Tagging in $^{136}$Xe
Authors:
NEXT Collaboration,
N. Byrnes,
E. Dey,
F. W. Foss,
B. J. P. Jones,
R. Madigan,
A. McDonald,
R. L. Miller,
K. E. Navarro,
L. R. Norman,
D. R. Nygren,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
J. E. Barcelon,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa
, et al. (90 additional authors not shown)
Abstract:
The imaging of individual Ba$^{2+}$ ions in high pressure xenon gas is one possible way to attain background-free sensitivity to neutrinoless double beta decay and hence establish the Majorana nature of the neutrino. In this paper we demonstrate selective single Ba$^{2+}$ ion imaging inside a high-pressure xenon gas environment. Ba$^{2+}$ ions chelated with molecular chemosensors are resolved at t…
▽ More
The imaging of individual Ba$^{2+}$ ions in high pressure xenon gas is one possible way to attain background-free sensitivity to neutrinoless double beta decay and hence establish the Majorana nature of the neutrino. In this paper we demonstrate selective single Ba$^{2+}$ ion imaging inside a high-pressure xenon gas environment. Ba$^{2+}$ ions chelated with molecular chemosensors are resolved at the gas-solid interface using a diffraction-limited imaging system with scan area of 1$\times$1~cm$^2$ located inside 10~bar of xenon gas. This new form of microscopy represents an important enabling step in the development of barium tagging for neutrinoless double beta decay searches in $^{136}$Xe, as well as a new tool for studying the photophysics of fluorescent molecules and chemosensors at the solid-gas interface.
△ Less
Submitted 20 May, 2024;
originally announced June 2024.
-
Measurement of Energy Resolution with the NEXT-White Silicon Photomultipliers
Authors:
T. Contreras,
B. Palmeiro,
H. Almazán,
A. Para,
G. Martínez-Lema,
R. Guenette,
C. Adams,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa,
A. Bayo,
J. M. Benlloch-Rodríguez,
F. I. G. M. Borges,
A. Brodolin,
N. Byrnes,
S. Cárcel,
A. Castillo
, et al. (85 additional authors not shown)
Abstract:
The NEXT-White detector, a high-pressure gaseous xenon time projection chamber, demonstrated the excellence of this technology for future neutrinoless double beta decay searches using photomultiplier tubes (PMTs) to measure energy and silicon photomultipliers (SiPMs) to extract topology information. This analysis uses $^{83m}\text{Kr}$ data from the NEXT-White detector to measure and understand th…
▽ More
The NEXT-White detector, a high-pressure gaseous xenon time projection chamber, demonstrated the excellence of this technology for future neutrinoless double beta decay searches using photomultiplier tubes (PMTs) to measure energy and silicon photomultipliers (SiPMs) to extract topology information. This analysis uses $^{83m}\text{Kr}$ data from the NEXT-White detector to measure and understand the energy resolution that can be obtained with the SiPMs, rather than with PMTs. The energy resolution obtained of (10.9 $\pm$ 0.6) $\%$, full-width half-maximum, is slightly larger than predicted based on the photon statistics resulting from very low light detection coverage of the SiPM plane in the NEXT-White detector. The difference in the predicted and measured resolution is attributed to poor corrections, which are expected to be improved with larger statistics. Furthermore, the noise of the SiPMs is shown to not be a dominant factor in the energy resolution and may be negligible when noise subtraction is applied appropriately, for high-energy events or larger SiPM coverage detectors. These results, which are extrapolated to estimate the response of large coverage SiPM planes, are promising for the development of future, SiPM-only, readout planes that can offer imaging and achieve similar energy resolution to that previously demonstrated with PMTs.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Design, characterization and installation of the NEXT-100 cathode and electroluminescence regions
Authors:
NEXT Collaboration,
K. Mistry,
L. Rogers,
B. J. P. Jones,
B. Munson,
L. Norman,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa,
A. Bayo,
J. M. Benlloch-Rodríguez,
F. I. G. M. Borges,
A. Brodolin,
N. Byrnes,
S. Cárcel
, et al. (85 additional authors not shown)
Abstract:
NEXT-100 is currently being constructed at the Laboratorio Subterráneo de Canfranc in the Spanish Pyrenees and will search for neutrinoless double beta decay using a high-pressure gaseous time projection chamber (TPC) with 100 kg of xenon. Charge amplification is carried out via electroluminescence (EL) which is the process of accelerating electrons in a high electric field region causing secondar…
▽ More
NEXT-100 is currently being constructed at the Laboratorio Subterráneo de Canfranc in the Spanish Pyrenees and will search for neutrinoless double beta decay using a high-pressure gaseous time projection chamber (TPC) with 100 kg of xenon. Charge amplification is carried out via electroluminescence (EL) which is the process of accelerating electrons in a high electric field region causing secondary scintillation of the medium proportional to the initial charge. The NEXT-100 EL and cathode regions are made from tensioned hexagonal meshes of 1 m diameter. This paper describes the design, characterization, and installation of these parts for NEXT-100. Simulations of the electric field are performed to model the drift and amplification of ionization electrons produced in the detector under various EL region alignments and rotations. Measurements of the electrostatic breakdown voltage in air characterize performance under high voltage conditions and identify breakdown points. The electrostatic deflection of the mesh is quantified and fit to a first-principles mechanical model. Measurements were performed with both a standalone test EL region and with the NEXT-100 EL region before its installation in the detector. Finally, we describe the parts as installed in NEXT-100, following their deployment in Summer 2023.
△ Less
Submitted 21 December, 2023; v1 submitted 6 November, 2023;
originally announced November 2023.
-
Demonstration of Event Position Reconstruction based on Diffusion in the NEXT-White Detector
Authors:
J. Haefner,
K. E. Navarro,
R. Guenette,
B. J. P. Jones,
A. Tripathi,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa,
A. Bayo,
J. M. BenllochRodríguez,
F. I. G. M. Borges,
A. Brodolin,
N. Byrnes,
S. Cárcel,
J. V. Carrión
, et al. (86 additional authors not shown)
Abstract:
Noble element time projection chambers are a leading technology for rare event detection in physics, such as for dark matter and neutrinoless double beta decay searches. Time projection chambers typically assign event position in the drift direction using the relative timing of prompt scintillation and delayed charge collection signals, allowing for reconstruction of an absolute position in the dr…
▽ More
Noble element time projection chambers are a leading technology for rare event detection in physics, such as for dark matter and neutrinoless double beta decay searches. Time projection chambers typically assign event position in the drift direction using the relative timing of prompt scintillation and delayed charge collection signals, allowing for reconstruction of an absolute position in the drift direction. In this paper, alternate methods for assigning event drift distance via quantification of electron diffusion in a pure high pressure xenon gas time projection chamber are explored. Data from the NEXT-White detector demonstrate the ability to achieve good position assignment accuracy for both high- and low-energy events. Using point-like energy deposits from $^{83\mathrm{m}}$Kr calibration electron captures ($E\sim45$keV), the position of origin of low-energy events is determined to $2~$cm precision with bias $< 1$mm. A convolutional neural network approach is then used to quantify diffusion for longer tracks (E$\geq$1.5MeV), yielding a precision of 3cm on the event barycenter. The precision achieved with these methods indicates the feasibility energy calibrations of better than 1% FWHM at Q$_{ββ}$ in pure xenon, as well as the potential for event fiducialization in large future detectors using an alternate method that does not rely on primary scintillation.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Dissipative Quantum Feedback in Measurements Using a Parametrically Coupled Microcavity
Authors:
Liu Qiu,
Guanhao Huang,
Itay Shomroni,
Jiahe Pan,
Paul Seidler,
Tobias J. Kippenberg
Abstract:
Micro- and nanoscale optical or microwave cavities are used in a wide range of classical applications and quantum science experiments, ranging from precision measurements, laser technologies to quantum control of mechanical motion. The dissipative photon loss via absorption, present to some extent in any optical cavity, is known to introduce thermo-optical effects and thereby impose fundamental li…
▽ More
Micro- and nanoscale optical or microwave cavities are used in a wide range of classical applications and quantum science experiments, ranging from precision measurements, laser technologies to quantum control of mechanical motion. The dissipative photon loss via absorption, present to some extent in any optical cavity, is known to introduce thermo-optical effects and thereby impose fundamental limits on precision measurements. Here, we theoretically and experimentally reveal that such dissipative photon absorption can result in quantum feedback via in-loop field detection of the absorbed optical field, leading to the intracavity field fluctuations to be squashed or antisquashed. Strikingly, this modifies the optical cavity susceptibility in coherent response measurements and causes excess noise and correlations in incoherent interferometric optomechanical measurements using a cavity. We experimentally observe such unanticipated dissipative dynamics in optomechanical spectroscopy of sideband-cooled optomechanical crystal cavitiess at both cryogenic temperature (approximately 8 K) and ambient conditions. The dissipative feedback introduces effective modifications to the optical cavity linewidth and the optomechanical scattering rate and gives rise to excess imprecision noise in the interferometric quantum measurement of mechanical motion. Such dissipative feedback differs fundamentally from a quantum nondemolition feedback, e.g., optical Kerr squeezing. The dissipative feedback itself always results in an antisqueezed out-of-loop optical field, while it can enhance the coexisting Kerr squeezing under certain conditions. Our result has wide-ranging implications for future dissipation engineering, such as dissipation enhanced sideband cooling and Kerr squeezing, quantum frequency conversion, and nonreciprocity in photonic systems.
△ Less
Submitted 5 May, 2022; v1 submitted 29 September, 2021;
originally announced September 2021.
-
Cryogenic electro-optic interconnect for superconducting devices
Authors:
Amir Youssefi,
Itay Shomroni,
Yash J. Joshi,
Nathan Bernier,
Anton Lukashchuk,
Philipp Uhrich,
Liu Qiu,
Tobias J. Kippenberg
Abstract:
Encoding information onto optical fields is the backbone of modern telecommunication networks. Optical fibers offer low loss transport and vast bandwidth compared to electrical cables, and are currently also replacing coaxial cables for short-range communications. Optical fibers also exhibit significantly lower thermal conductivity, making optical interconnects attractive for interfacing with supe…
▽ More
Encoding information onto optical fields is the backbone of modern telecommunication networks. Optical fibers offer low loss transport and vast bandwidth compared to electrical cables, and are currently also replacing coaxial cables for short-range communications. Optical fibers also exhibit significantly lower thermal conductivity, making optical interconnects attractive for interfacing with superconducting circuits and devices. Yet little is known about modulation at cryogenic temperatures. Here we demonstrate a proof-of-principle experiment, showing that currently employed Ti-doped LiNbO modulators maintain the Pockels coefficient at 3K---a base temperature for classical microwave amplifier circuitry. We realize electro-optical read-out of a superconducting electromechanical circuit to perform both coherent spectroscopy, measuring optomechanically-induced transparency, and incoherent thermometry, encoding the thermomechanical sidebands in an optical signal. Although the achieved noise figures are high, approaches that match the lower-bandwidth microwave signals, use integrated devices or materials with higher EO coefficient, should achieve added noise similar to current HEMT amplifiers, providing a route to parallel readout for emerging quantum or classical computing platforms.
△ Less
Submitted 11 September, 2020; v1 submitted 9 April, 2020;
originally announced April 2020.
-
All-Optical Routing of Single Photons by a One-Atom Switch Controlled by a Single Photon
Authors:
Itay Shomroni,
Serge Rosenblum,
Yulia Lovsky,
Orel Bechler,
Gabriel Guendelman,
Barak Dayan
Abstract:
The prospect of quantum networks, in which quantum information is carried by single photons in photonic circuits, has long been the driving force behind the effort to achieve all-optical routing of single photons. Here we realize the most basic unit of such a photonic circuit: a single-photon activated switch, capable of routing a photon from any of its two inputs to any of its two outputs. Our de…
▽ More
The prospect of quantum networks, in which quantum information is carried by single photons in photonic circuits, has long been the driving force behind the effort to achieve all-optical routing of single photons. Here we realize the most basic unit of such a photonic circuit: a single-photon activated switch, capable of routing a photon from any of its two inputs to any of its two outputs. Our device is based on a single 87Rb atom coupled to a fiber-coupled, chip-based microresonator, and is completely all-optical, requiring no other fields beside the in-fiber single-photon pulses. Nonclassical statistics of the control pulse confirm that a single reflected photon toggles the switch from high reflection (65%) to high transmission (90%), with average of ~1.5 control photons per switching event (~3 including linear losses). The fact that the control and target photons are both in-fiber and practically identical makes this scheme compatible with scalable architectures for quantum information processing.
△ Less
Submitted 5 May, 2014;
originally announced May 2014.
-
Demonstration of fold and cusp catastrophes in an atomic cloud reflected from an optical barrier in the presence of gravity
Authors:
Serge Rosenblum,
Orel Bechler,
Itay Shomroni,
Roy Kaner,
Talya Arusi-Parpar,
Oren Raz,
Barak Dayan
Abstract:
We experimentally demonstrate first-order (fold) and second-order (cusp) catastrophes in the density of an atomic cloud reflected from an optical barrier in the presence of gravity, and show their corresponding universal asymptotic behavior. The cusp point enables robust, field-free refocusing of an expanding atomic cloud with a wide velocity distribution. Specifically, the density attained at the…
▽ More
We experimentally demonstrate first-order (fold) and second-order (cusp) catastrophes in the density of an atomic cloud reflected from an optical barrier in the presence of gravity, and show their corresponding universal asymptotic behavior. The cusp point enables robust, field-free refocusing of an expanding atomic cloud with a wide velocity distribution. Specifically, the density attained at the cusp point in our experiment reached 65% of the peak density of the atoms in the trap prior to their release. We thereby add caustics to the various phenomena with parallels in optics that can be harnessed for manipulation of cold atoms. The structural stability of catastrophes provides inherent robustness against variations in the system's dynamics and initial conditions, making them suitable for manipulation of atoms under imperfect conditions and limited controllability.
△ Less
Submitted 30 September, 2013;
originally announced September 2013.
-
Demonstration of Weak Measurement Based on Atomic Spontaneous Emission
Authors:
Itay Shomroni,
Orel Bechler,
Serge Rosenblum,
Barak Dayan
Abstract:
We demonstrate a new type of weak measurement based on the dynamics of spontaneous emission. The pointer in our scheme is given by the Lorentzian distribution characterizing atomic exponential decay via emission of a single photon. We thus introduce weak measurement, so far demonstrated nearly exclusively with laser beams and Gaussian statistics, into the quantum regime of single emitters and sing…
▽ More
We demonstrate a new type of weak measurement based on the dynamics of spontaneous emission. The pointer in our scheme is given by the Lorentzian distribution characterizing atomic exponential decay via emission of a single photon. We thus introduce weak measurement, so far demonstrated nearly exclusively with laser beams and Gaussian statistics, into the quantum regime of single emitters and single quanta, enabling the exploitation of a wide class of sources that are abundant in nature. We describe a complete analogy between our scheme and weak measurement with conventional Gaussian pointers. Instead of a shift in the mean of a Gaussian distribution, an imaginary weak value is exhibited in our scheme by a significantly slower-than-natural exponential distribution of emitted photons at the postselected polarization, leading to a large shift in their mean arrival time. The dynamics of spontaneous emission offer a broader view of the measurement process than is usually considered within the weak measurement formalism. Our scheme opens the path for the use of atoms and atomlike systems as sensitive probes in weak measurements, one example being optical magnetometry.
△ Less
Submitted 14 July, 2013; v1 submitted 10 April, 2013;
originally announced April 2013.
-
Experimental Investigation of the Transition between Autler-Townes Splitting and Electromagnetically-Induced Transparency
Authors:
L. Giner,
L. Veissier,
B. Sparkes,
A. S. Sheremet,
A. Nicolas,
O. S. Mishina,
M. Scherman,
S. Burks,
I. Shomroni,
D. V. Kupriyanov,
P. K. Lam,
E. Giacobino,
J. Laurat
Abstract:
Two phenomena can affect the transmission of a weak signal field through an absorbing medium in the presence of a strong additional field: electromagnetically induced transparency (EIT) and Autler-Townes splitting (ATS). Being able to discriminate between the two is important for various applications. Here we present an experimental investigation into a method that allows for such a disambiguation…
▽ More
Two phenomena can affect the transmission of a weak signal field through an absorbing medium in the presence of a strong additional field: electromagnetically induced transparency (EIT) and Autler-Townes splitting (ATS). Being able to discriminate between the two is important for various applications. Here we present an experimental investigation into a method that allows for such a disambiguation as proposed in [Phys. Rev. Lett. 107, 163604 (2011)]. We apply the proposed test based on Akaike's information criterion to a coherently driven ensemble of cold cesium atoms and find a good agreement with theoretical predictions, therefore demonstrating the suitability of the method. Additionally, our results demonstrate that the value of the Rabi frequency for the ATS/EIT model transition in such a system depends on the level structure and on the residual inhomogeneous broadening.
△ Less
Submitted 26 June, 2012;
originally announced June 2012.
