-
First realization of macroscopic Fourier ptychography for hundred-meter distance sub-diffraction imaging
Authors:
Qi Zhang,
Yuran Lu,
Yinghui Guo,
Yingjie Shang,
Mingbo Pu,
Yulong Fan,
Rui Zhou,
Xiaoyin Li,
Fei Zhang,
Mingfeng Xu,
Xiangang Luo
Abstract:
Fourier ptychography (FP) imaging, drawing on the idea of synthetic aperture, has been demonstrated as a potential approach for remote sub-diffraction-limited imaging. Nevertheless, the farthest imaging distance is still limited around 10 m even though there has been a significant improvement in macroscopic FP. The most severely issue in increasing the imaging distance is FoV limitation caused by…
▽ More
Fourier ptychography (FP) imaging, drawing on the idea of synthetic aperture, has been demonstrated as a potential approach for remote sub-diffraction-limited imaging. Nevertheless, the farthest imaging distance is still limited around 10 m even though there has been a significant improvement in macroscopic FP. The most severely issue in increasing the imaging distance is FoV limitation caused by far-field condition for diffraction. Here, we propose to modify the Fourier far-field condition for rough reflective objects, aiming to overcome the small FoV limitation by using a divergent beam to illuminate objects. A joint optimization of pupil function and target image is utilized to attain the aberration-free image while estimating the pupil function simultaneously. Benefiting from the optimized reconstruction algorithm which effectively expands the camera's effective aperture, we experimentally implement several FP systems suited for imaging distance of 12 m, 90 m, and 170 m with the maximum synthetic aperture of 200 mm. The maximum imaging distance and synthetic aperture are thus improved by more than one order of magnitude of the state-of-the-art works with a fourfold improvement in the resolution. Our findings demonstrate significant potential for advancing the field of macroscopic FP, propelling it into a new stage of development.
△ Less
Submitted 22 October, 2023;
originally announced October 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
New Phase Space Formulations and Quantum Dynamics Approaches
Authors:
Xin He,
Baihua Wu,
Youhao Shang,
Bingqi Li,
Xiangsong Cheng,
Jian Liu
Abstract:
We report recent progress on the phase space formulation of quantum mechanics with coordinate-momentum variables, focusing more on new theory of (weighted) constraint coordinate-momentum phase space for discrete-variable quantum systems. This leads to a general coordinate-momentum phase space formulation of composite quantum systems, where conventional representations on infinite phase space are e…
▽ More
We report recent progress on the phase space formulation of quantum mechanics with coordinate-momentum variables, focusing more on new theory of (weighted) constraint coordinate-momentum phase space for discrete-variable quantum systems. This leads to a general coordinate-momentum phase space formulation of composite quantum systems, where conventional representations on infinite phase space are employed for continuous variables. It is convenient to utilize (weighted) constraint coordinate-momentum phase space for representing the quantum state and describing nonclassical features. Various numerical tests demonstrate that new trajectory-based quantum dynamics approaches derived from the (weighted) constraint phase space representation are useful and practical for describing dynamical processes of composite quantum systems in gas phase as well as in condensed phase.
△ Less
Submitted 17 May, 2022; v1 submitted 8 May, 2022;
originally announced May 2022.
-
Structured electrode additive manufacturing for lithium-ion batteries
Authors:
Soyeon Park,
Kaiyue Deng,
Baohui Shi,
Yuanyuan Shang,
Kun,
Fu
Abstract:
A thick electrode with high areal capacity has been developed as a strategy for high-energy-density lithium-ion batteries, but thick electrodes have difficulties in manufacturing and limitations in ion transport. Here, we reported a new manufacturing approach for ultra-thick electrode with aligned structure, called structure electrode additive manufacturing or SEAM, which aligns active materials t…
▽ More
A thick electrode with high areal capacity has been developed as a strategy for high-energy-density lithium-ion batteries, but thick electrodes have difficulties in manufacturing and limitations in ion transport. Here, we reported a new manufacturing approach for ultra-thick electrode with aligned structure, called structure electrode additive manufacturing or SEAM, which aligns active materials to the through-thicknesses direction of electrodes using shear flow and a designed printing path. The ultra-thick electrodes with high loading of active materials, low tortuous structure, and good structure stability resulting from a simple and scalable SEAM lead to rapid ion transport and fast electrolyte infusion, delivering a higher areal capacity than slurry-casted thick electrodes. SEAM shows strengths in design flexibility and scalability, which allows the production of practical high energy/power density structure electrodes.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Inhalation and deposition of spherical and pollen particles after middle turbinate resection in a human nasal cavity
Authors:
Kiao Inthavong,
Yidan Shang,
John M. Del Gaudio,
Sarah K. Wise,
Thomas S. Edwards,
Kimberley Bradshaw,
Eugene Wong,
Murray Smith,
Narinder Singh
Abstract:
Middle turbinate resection significantly alters the anatomy and redistributes the inhaled air. The superior half of the main nasal cavity is opened up, increasing accessibility to the region. This is expected to increase inhalation dosimetry to the region during exposure to airborne particles. This study investigated the influence of middle turbinate resection on the deposition of inhaled pollutan…
▽ More
Middle turbinate resection significantly alters the anatomy and redistributes the inhaled air. The superior half of the main nasal cavity is opened up, increasing accessibility to the region. This is expected to increase inhalation dosimetry to the region during exposure to airborne particles. This study investigated the influence of middle turbinate resection on the deposition of inhaled pollutants that cover spherical and non-spherical particles (e.g. pollen). A computational model of the nasal cavity from CT scans, and its corresponding post-operative model with virtual surgery performed was created. Two constant flow rates of 5_L/min, and 15_L/min were simulated under a laminar flow field. Inhaled particles including pollen (non-spherical), and a spherical particle with reference density of 1000 kg/m3 were introduced in the surrounding atmosphere. The effect of surgery was most prominent in the less patent cavity side, since the change in anatomy was proportionally greater relative to the original airway space. The left cavity produced an increase in particle deposition at a flow rate of 15_L/min. The main particle deposition mechanisms were inertial impaction, and to a lesser degree gravitational sedimentation. The results are expected to provide insight into inhalation efficiency of different aerosol types, and the likelihood of deposition in different nasal cavity surfaces.
△ Less
Submitted 8 August, 2021;
originally announced August 2021.
-
Sedimentation effects on particle position and inertial deposition in 90° circular bends
Authors:
Sara Vahaji,
Ngoc-Hien Nguyen,
Yidan Shang,
Kiao Inthavong
Abstract:
Laminar fluid-particle flows in bend geometries are present in many industrial, pharmaceutical, and biomedical applications. Particle deposition has been studied extensively; however, little attention has been paid to the effect of particle sedimentation on particle position and deposition in different pipe geometry combinations. This study presented a comprehensive analysis of sedimentation effec…
▽ More
Laminar fluid-particle flows in bend geometries are present in many industrial, pharmaceutical, and biomedical applications. Particle deposition has been studied extensively; however, little attention has been paid to the effect of particle sedimentation on particle position and deposition in different pipe geometry combinations. This study presented a comprehensive analysis of sedimentation effects on particle flow behaviour in 90° circular pipe bends of micron particles in laminar pipe flows. Pipe geometry combinations consisted of eight pipe diameters, nine bend radii, and 30 particle diameters in a range of 1 to 100 μm. The results demonstrated the locations of particles that sedimented to the bottom half of the straight pipe section, and the particle positions upstream from the pipe bend entrance, which was no longer in a fully developed profile. These new locations represent the effects of gravity, pulling the particles down. While obtaining these positions can be found through CFD analysis, we proposed an analytical solution to predict the particle trajectory from different release locations that would help to identify the initial particle distribution at locations upstream to the bend, to obviate the need for long upstream straight pipe sections in the CFD analysis.
△ Less
Submitted 19 August, 2021; v1 submitted 6 August, 2021;
originally announced August 2021.
-
The impact of nasal adhesions on airflow and mucosal cooling -- a computational fluid dynamics analysis
Authors:
Praween Senanayakea,
Hana Salati,
Eugene Wong,
Kimberley Bradshaw,
Yidan Shang,
Narinder Singh,
Kiao Inthavong
Abstract:
Nasal adhesions are a known postoperative complication following surgical procedures for nasal airway obstruction (NAO); and are a common cause of surgical failure, with patients often reporting significant NAO, despite relatively minor adhesion size. Division of such nasal adhesions often provides much greater relief than anticipated, based on the minimal reduction in cross-sectional area associa…
▽ More
Nasal adhesions are a known postoperative complication following surgical procedures for nasal airway obstruction (NAO); and are a common cause of surgical failure, with patients often reporting significant NAO, despite relatively minor adhesion size. Division of such nasal adhesions often provides much greater relief than anticipated, based on the minimal reduction in cross-sectional area associated with the adhesion. The available literature regarding nasal adhesions provides little evidence examining their quantitative and qualitative effects on nasal airflow using objective measures. This study examined the impact of nasal adhesions at various anatomical sites on nasal airflow and mucosal cooling using computational fluid dynamics (CFD). A high-resolution CT scan of the paranasal sinuses of a 25-year-old, healthy female patient was segmented to create a three-dimensional nasal airway model. Virtual nasal adhesions of 2.5~mm diameter were added to various locations within the nasal cavity, representing common sites seen following NAO surgery. A series of models with single adhesions were created. CFD analysis was performed on each model and compared with a baseline no-adhesion model, comparing airflow and heat and mass transfer. The nasal adhesions resulted in no significant change in bulk airflow patterns through the nasal cavity. However, significant changes were observed in local airflow and mucosal cooling around and immediately downstream to the nasal adhesions. These were most evident with anterior nasal adhesions at the internal valve and anterior inferior turbinate.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
Hydrogenation via a low energy mechanochemical approach: the MgB$_2$ case
Authors:
Claudio Pistidda,
Archa Santhosh,
Paul Jerabek,
Yuanyuan Shang,
Alessandro Girella,
Chiara Milanese,
Maria Dore,
Sebastiano Garroni,
Simone Bordignon,
Michele R. Chierotti,
Thomas Klassen,
Martin Dornheim
Abstract:
This work aims at investigating the effect that the energy transferred during powder-to-wall collisions in a milling process without grinding media entails on solid-gas reactions. For this purpose, the synthesis of Mg(BH$_4$)$_2$ from MgB$_2$ in a pressurized hydrogen atmosphere was chosen as a model reaction. MgB$_2$ was milled under a broad set of milling parameters (i.e. milling times and rota…
▽ More
This work aims at investigating the effect that the energy transferred during powder-to-wall collisions in a milling process without grinding media entails on solid-gas reactions. For this purpose, the synthesis of Mg(BH$_4$)$_2$ from MgB$_2$ in a pressurized hydrogen atmosphere was chosen as a model reaction. MgB$_2$ was milled under a broad set of milling parameters (i.e. milling times and rotation regimes) and the obtained product thoroughly characterized. By proving the partial formation of Mg(BH$_4$)$_2$, the results of this investigation indicate that the energy transferred to the powder bed by the powder particles colliding with the chamber wall during milling is not negligible, in particular when the milling process is protracted for a long period.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Topological nanophotonics for photoluminescence control
Authors:
Aditya Tripathi,
Sergey Kruk,
Yunfei Shang,
Jiajia Zhou,
Ivan Kravchenko,
Dayong **,
Yuri Kivshar
Abstract:
Rare-earth doped nanocrystals are emerging light sources used for many applications in nanotechnology enabled by human ability to control their various optical properties with chemistry and material science. However, one important optical problem -- polarisation of photoluminescence -- remains largely out of control by chemistry methods. Control over photoluminescence polarisation can be gained vi…
▽ More
Rare-earth doped nanocrystals are emerging light sources used for many applications in nanotechnology enabled by human ability to control their various optical properties with chemistry and material science. However, one important optical problem -- polarisation of photoluminescence -- remains largely out of control by chemistry methods. Control over photoluminescence polarisation can be gained via coupling of emitters to resonant nanostructures such as optical antennas and metasurfaces. However, the resulting polarization is typically sensitive to position disorder of emitters, which is difficult to mitigate. Recently, new classes of disorder-immune optical systems have been explored within the framework of topological photonics. Here we explore disorder-robust topological arrays of Mie-resonant nanoparticles for polarisation control of photoluminescence of nanocrystals. We demonstrate polarized emission from rare-earth-doped nanocrystals governed by photonic topological edge states supported by zigzag arrays of dielectric resonators. We verify the topological origin of polarised photoluminescence by comparing emission from nanoparticles coupled to topologically trivial and nontrivial arrays of nanoresonators.
△ Less
Submitted 10 September, 2020; v1 submitted 30 August, 2020;
originally announced August 2020.
-
Quantum inspired K-means algorithm using matrix product states
Authors:
Xiao Shi,
Yun Shang,
Chu Guo
Abstract:
Matrix product state has become the algorithm of choice when studying one-dimensional interacting quantum many-body systems, which demonstrates to be able to explore the most relevant portion of the exponentially large quantum Hilbert space and find accurate solutions. Here we propose a quantum inspired K-means clustering algorithm which first maps the classical data into quantum states represente…
▽ More
Matrix product state has become the algorithm of choice when studying one-dimensional interacting quantum many-body systems, which demonstrates to be able to explore the most relevant portion of the exponentially large quantum Hilbert space and find accurate solutions. Here we propose a quantum inspired K-means clustering algorithm which first maps the classical data into quantum states represented as matrix product states, and then minimize the loss function using the variational matrix product states method in the enlarged space. We demonstrate the performance of this algorithm by applying it to several commonly used machine learning datasets and show that this algorithm could reach higher prediction accuracies and that it is less likely to be trapped in local minima compared to the classical K-means algorithm.
△ Less
Submitted 19 June, 2020; v1 submitted 10 June, 2020;
originally announced June 2020.
-
Opinion formation in multiplex networks with general initial distributions
Authors:
Chris G. Antonopoulos,
Yilun Shang
Abstract:
We study opinion dynamics over multiplex networks where agents interact with bounded confidence. Namely, two neighbouring individuals exchange opinions and compromise if their opinions do not differ by more than a given threshold. In literature, agents are generally assumed to have a homogeneous confidence bound. Here, we study analytically and numerically opinion evolution over structured network…
▽ More
We study opinion dynamics over multiplex networks where agents interact with bounded confidence. Namely, two neighbouring individuals exchange opinions and compromise if their opinions do not differ by more than a given threshold. In literature, agents are generally assumed to have a homogeneous confidence bound. Here, we study analytically and numerically opinion evolution over structured networks characterised by multiple layers with respective confidence thresholds and general initial opinion distributions. Through rigorous probability analysis, we show analytically the critical thresholds at which a phase transition takes place in the long-term consensus behaviour, over multiplex networks with some regularity conditions. Our results reveal the quantitative relation between the critical threshold and initial distribution. Further, our numerical simulations illustrate the consensus behaviour of the agents in network topologies including lattices and, small-world and scale-free networks, as well as for structure-dependent convergence parameters accommodating node heterogeneity. We find that the critical thresholds for consensus tend to agree with the predicted upper bounds in Theorems 4 and 5 in this paper. Finally, our results indicate that multiplexity hinders consensus formation when the initial opinion configuration is within a bounded range and, provide insight into information diffusion and social dynamics in multiplex systems modeled by networks.
△ Less
Submitted 29 January, 2018; v1 submitted 25 October, 2017;
originally announced October 2017.
-
Consensus reaching in swarms ruled by a hybrid metric-topological distance
Authors:
Yilun Shang,
Roland Bouffanais
Abstract:
Recent empirical observations of three-dimensional bird flocks and human crowds have challenged the long-prevailing assumption that a metric interaction distance rules swarming behaviors. In some cases, individual agents are found to be engaged in local information exchanges with a fixed number of neighbors, i.e. a topological interaction. However, complex system dynamics based on pure metric or p…
▽ More
Recent empirical observations of three-dimensional bird flocks and human crowds have challenged the long-prevailing assumption that a metric interaction distance rules swarming behaviors. In some cases, individual agents are found to be engaged in local information exchanges with a fixed number of neighbors, i.e. a topological interaction. However, complex system dynamics based on pure metric or pure topological distances both face physical inconsistencies in low and high density situations. Here, we propose a hybrid metric-topological interaction distance overcoming these issues and enabling a real-life implementation in artificial robotic swarms. We use network- and graph-theoretic approaches combined with a dynamical model of locally interacting self-propelled particles to study the consensus reaching pro- cess for a swarm ruled by this hybrid interaction distance. Specifically, we establish exactly the probability of reaching consensus in the absence of noise. In addition, simulations of swarms of self-propelled particles are carried out to assess the influence of the hybrid distance and noise.
△ Less
Submitted 22 May, 2017; v1 submitted 26 September, 2014;
originally announced September 2014.
-
Swarming collapse under limited information flow between individuals
Authors:
Mohammad Komareji,
Yilun Shang,
Roland Bouffanais
Abstract:
The emergence of collective decision in swarms and their coordinated response to complex environments underscore the central role played by social transmission of information. Here, the different possible origins of information flow bottlenecks are identified. Using a combination of network-, control- and information-theoretic elements applied to a group of interacting self-propelled particles, th…
▽ More
The emergence of collective decision in swarms and their coordinated response to complex environments underscore the central role played by social transmission of information. Here, the different possible origins of information flow bottlenecks are identified. Using a combination of network-, control- and information-theoretic elements applied to a group of interacting self-propelled particles, the effect of varying information capacity of the signaling channel on dynamic collective behaviors is revealed. We find a sufficient condition on the information data rate that guarantees the effectiveness of swarming while also highlighting the profound connection with the topology of the underlying interaction network. We also show that when decreasing the data rate, the swarming behavior invariably vanishes following a second-order phase transition irrespective of the intrinsic noise level. The variations along the transition line are found to be in good agreement with information-theoretic predictions.
△ Less
Submitted 22 May, 2017; v1 submitted 25 September, 2014;
originally announced September 2014.
-
Preliminary design of laser accelerator beam line
Authors:
Y. Shang,
K. Zhu,
C. Cao,
J. G. Zhu,
Y. R. Lu,
Z. Y. Guo,
J. E. Chen,
X. Q Yan
Abstract:
A Compact laser plasma accelerator (CLAPA) is being built in Peking University, which is based on RPA-PSA mechanism or other acceleration mechanisms. According to the beam parameters from preparatory experiments and theoretical simulations, the beam line is preliminarily designed. The beam line is mainly constituted by common transport elements to deliver proton beam with the energy of 1~50MeV, en…
▽ More
A Compact laser plasma accelerator (CLAPA) is being built in Peking University, which is based on RPA-PSA mechanism or other acceleration mechanisms. According to the beam parameters from preparatory experiments and theoretical simulations, the beam line is preliminarily designed. The beam line is mainly constituted by common transport elements to deliver proton beam with the energy of 1~50MeV, energy spread of 0~1% and current of 0~108 proton per pulse to satisfy the requirement of different experiments. The simulation result of 15MeV proton beam with an energy spread of 1%, current of 1x108 proton per pulse and final spot radius of 9mm is presented in this paper.
△ Less
Submitted 28 November, 2013; v1 submitted 4 November, 2013;
originally announced November 2013.
-
Synchronization in Networks of Coupled Harmonic Oscillators with Stochastic Perturbation and Time Delays
Authors:
Yilun Shang
Abstract:
In this paper, we investigate synchronization of coupled second-order linear harmonic oscillators with random noises and time delays. The interaction topology is modeled by a weighted directed graph and the weights are perturbed by white noise. On the basis of stability theory of stochastic differential delay equations, algebraic graph theory and matrix theory, we show that the coupled harmonic…
▽ More
In this paper, we investigate synchronization of coupled second-order linear harmonic oscillators with random noises and time delays. The interaction topology is modeled by a weighted directed graph and the weights are perturbed by white noise. On the basis of stability theory of stochastic differential delay equations, algebraic graph theory and matrix theory, we show that the coupled harmonic oscillators can be synchronized almost surely with perturbation and time delays. Numerical examples are presented to illustrate our theoretical results.
△ Less
Submitted 27 September, 2009;
originally announced September 2009.