-
A Novel Diamond-like Carbon based photocathode for PICOSEC Micromegas detectors
Authors:
X. Wang,
R. Aleksan,
Y. Angelis,
J. Bortfeldt,
F. Brunbauer,
M. Brunoldi,
E. Chatzianagnostou,
J. Datta,
K. Degmelt,
G. Fanourakis,
D. Fiorina,
K. J. Floethner,
M. Gallinaro,
F. Garcia,
I. Giomataris,
K. Gnanvo,
F. J. Iguaz,
D. Janssens,
A. Kallitsopoulou,
M. Kovacic,
B. Kross,
P. Legou,
M. Lisowska,
J. Liu,
I. Maniatis
, et al. (26 additional authors not shown)
Abstract:
The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector based on a MM detector operating in a two-stage amplification mode and a Cherenkov radiator. Prototypes equipped with cesium iodide (CsI) photocathodes have shown promising time resolutions as precise as 24 picoseconds (ps) for Minimum Ionizing Particles. However, due to the high hygroscopicity and susceptibility to ion bomb…
▽ More
The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector based on a MM detector operating in a two-stage amplification mode and a Cherenkov radiator. Prototypes equipped with cesium iodide (CsI) photocathodes have shown promising time resolutions as precise as 24 picoseconds (ps) for Minimum Ionizing Particles. However, due to the high hygroscopicity and susceptibility to ion bombardment of the CsI photocathodes, alternative photocathode materials are needed to improve the robustness of PICOSEC MM. Diamond-like Carbon (DLC) film have been introduced as a novel robust photocathode material, which have shown promising results. A batch of DLC photocathodes with different thicknesses were produced and evaluated using ultraviolet light. The quantum efficiency measurements indicate that the optimized thickness of the DLC photocathode is approximately 3 nm. Furthermore, DLC photocathodes show good resistance to ion bombardment in aging test compared to the CsI photocathode. Finally, a PICOSEC MM prototype equipped with DLC photocathodes was tested in muon beams. A time resolution of around 42 ps with a detection efficiency of 97% for 150 GeV/c muons were obtained. These results indicate the great potential of DLC as a photocathode for the PICOSEC MM detector.
△ Less
Submitted 25 June, 2024; v1 submitted 12 June, 2024;
originally announced June 2024.
-
Viscosity bounds in liquids with different structure and bonding types
Authors:
M. Withington,
H. L. Devereux,
C. Cockrell,
A. M. Elena,
I. T. Todorov,
Z. K. Liu,
S. L. Shang,
J. S. McCloy,
P. A. Bingham,
K. Trachenko
Abstract:
Recently, it was realised that liquid viscosity has a lower bound which is nearly constant for all liquids and is governed by fundamental physical constants. This was supported by experimental data in noble and molecular liquids. Here, we perform large-scale molecular dynamics simulations to ascertain this bound in two other important liquid types: the ionic molten salt system LiF and metallic Pb.…
▽ More
Recently, it was realised that liquid viscosity has a lower bound which is nearly constant for all liquids and is governed by fundamental physical constants. This was supported by experimental data in noble and molecular liquids. Here, we perform large-scale molecular dynamics simulations to ascertain this bound in two other important liquid types: the ionic molten salt system LiF and metallic Pb. We find that these ionic and metallic systems similarly have lower viscosity bounds corresponding to the minimum of kinematic viscosity of about 10$^{-7}$ $\frac{{\rm m}^2}{\rm s}$. We show that this agrees with experimental data in other systems with different structures and bonding types, including noble, molecular, metallic and covalent liquids. This expands the universality of viscosity bounds into the main system types known.
△ Less
Submitted 6 January, 2024;
originally announced January 2024.
-
EasyScan_HEP: a tool for connecting programs to scan the parameter space of physics models
Authors:
Liangliang Shang,
Yang Zhang
Abstract:
We present an application, EasyScan_HEP, for connecting programs to scan the parameter space of High Energy Physics (HEP) models using various sampling algorithms. We develop EasyScan_HEP according to the principle of flexibility and usability. EasyScan_HEP allows us to connect different programs that calculate physical observables, and apply constraints by one human-readable configuration file. A…
▽ More
We present an application, EasyScan_HEP, for connecting programs to scan the parameter space of High Energy Physics (HEP) models using various sampling algorithms. We develop EasyScan_HEP according to the principle of flexibility and usability. EasyScan_HEP allows us to connect different programs that calculate physical observables, and apply constraints by one human-readable configuration file. All programs executed through command lines can be connected to EasyScan_HEP by setting input and output parameters of the programs. The current version offers the sampling algorithms of Random, Grid, Markov chain Monte Carlo and MultiNest. We also implement features such as resume function, parallelization, post-processing, and quick analysis.
△ Less
Submitted 28 November, 2023; v1 submitted 7 April, 2023;
originally announced April 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Role of focusing distance in picosecond laser-induced Cu plasma spectra
Authors:
Linyu Chen,
Hu Deng,
Zhixiang Wu,
Zhonggang Xiong,
** Guo,
Quancheng Liu,
Akwasi Danso Samuel,
Li** Shang
Abstract:
To study the effects of focusing distance on the characteristics of copper plasma, a picosecond laser was utilized to ablate a pure copper plate to generate a plasma spectrum. Following numerous experiments on the subject, three significant factors have been determined: lens focal length, pulse energy and the lens-to-sample distance. These factors were employed to analyze the spectral intensity, p…
▽ More
To study the effects of focusing distance on the characteristics of copper plasma, a picosecond laser was utilized to ablate a pure copper plate to generate a plasma spectrum. Following numerous experiments on the subject, three significant factors have been determined: lens focal length, pulse energy and the lens-to-sample distance. These factors were employed to analyze the spectral intensity, plasma temperature and electron density in the local thermodynamic equilibrium (LTE) and optically thin condition. Due to the shielding effects of mixed plasma, the strongest spectral intensity can be obtained in the pre-focused case rather than on the focus, no matter how much beam irradiance was employed. The more intensive the beam irradiance is, the more the optimal position is distant from the focal point. Similarly, the evolution of plasma temperature and electron density was shown a peak in the pre-focused case, which is consistent with the trend of spectral intensity. For the case of extremely high irradiance (on the focus), the shielding effects become more apparent and the resultant above three factors decreased sharply. When a longer-focal-length lens was employed, the spectral intensity exhibited an obvious bimodal trend. In the pre-focused case, a longer-focal-length lens is helpful to eliminate the effects of the roughness of the target surface compared with a shorter one. Finally, the assumed LTE was validated by McWhirter relation, plasma relaxation time and diffusion length, and the optically thin condition also validated by spectral intensity ratio. We hope this work could be an important reference for the future design of highly optimized experiments for Calibration-Free Laser-Induced Breakdown Spectroscopy (CF-LIBS).
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Premelting-directed interfacial design of nanoshell-coated cells in directional freezing and thawing
Authors:
Jiaxue You,
Yunhan Zhang,
Qiao Chen,
Yifan Xie,
Yixiao Li,
Lifang Hu,
Li Shang
Abstract:
Freezing interface interacting with soft cells is a core issue in cryopreservation. However, most of existing cryopreservation approaches face challenges such as complex processing and poor controllability. Herein we report a new, nanotechnology-based method to modulate interfacial interactions between ice and cells via the premelting theory. Through the interfacial design by controllably modifyin…
▽ More
Freezing interface interacting with soft cells is a core issue in cryopreservation. However, most of existing cryopreservation approaches face challenges such as complex processing and poor controllability. Herein we report a new, nanotechnology-based method to modulate interfacial interactions between ice and cells via the premelting theory. Through the interfacial design by controllably modifying biocompatible nanoshells on the surface of cells, the effective Hamaker constant between cells and ice can be modified. The thickness of premelted films between cells and ice is further regulated, and directional migration of coated cells occurs in a thermal gradient to achieve directional thawing of coated cells. The decreased mortality of freezing coated cells suggests the premelting modulation in freezing and thawing can effectively protect cells from mechanical damage of ice formation during freezing and ice recrystallization during thawing.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
A resistive ACHINOS multi-anode structure with DLC coating for spherical proportional counters
Authors:
I. Giomataris,
M. Gros,
I. Katsioulas,
P. Knights,
J. -P. Mols,
T. Neep,
K. Nikolopoulos,
G. Savvidis,
I. Savvidis,
L. Shang,
R. Ward,
Y. Zhou
Abstract:
The spherical proportional counter is a gaseous detector used in a variety of applications, including direct dark matter and neutrino-less double beta decay searches. The ACHINOS multianode structure is a read-out technology that overcomes the limitations of single-anode read-out structures for large-size detectors and operation under high pressure. A resistive ACHINOS is presented, where the 3D p…
▽ More
The spherical proportional counter is a gaseous detector used in a variety of applications, including direct dark matter and neutrino-less double beta decay searches. The ACHINOS multianode structure is a read-out technology that overcomes the limitations of single-anode read-out structures for large-size detectors and operation under high pressure. A resistive ACHINOS is presented, where the 3D printed central component is coated in a Diamond-Like Carbon (DLC) layer. The production and testing of the structure, in terms of stability and resolution, is described. Further applications in fundamental physics and industry are also discussed.
△ Less
Submitted 26 October, 2020; v1 submitted 2 March, 2020;
originally announced March 2020.
-
Applying High-Resolution Visible Imagery to Satellite Melt Pond Fraction Retrieval: A Neural Network Approach
Authors:
Qi Liu,
Yawen Zhang,
Qin Lv,
Li Shang
Abstract:
During summer, melt ponds have a significant influence on Arctic sea-ice albedo. The melt pond fraction (MPF) also has the ability to forecast the Arctic sea-ice in a certain period. It is important to retrieve accurate melt pond fraction (MPF) from satellite data for Arctic research. This paper proposes a satellite MPF retrieval model based on the multi-layer neural network, named MPF-NN. Our mod…
▽ More
During summer, melt ponds have a significant influence on Arctic sea-ice albedo. The melt pond fraction (MPF) also has the ability to forecast the Arctic sea-ice in a certain period. It is important to retrieve accurate melt pond fraction (MPF) from satellite data for Arctic research. This paper proposes a satellite MPF retrieval model based on the multi-layer neural network, named MPF-NN. Our model uses multi-spectral satellite data as model input and MPF information from multi-site and multi-period visible imagery as prior knowledge for modeling. It can effectively model melt ponds evolution of different regions and periods over the Arctic. Evaluation results show that the MPF retrieved from MODIS data using the proposed model has an RMSE of 3.91% and a correlation coefficient of 0.73. The seasonal distribution of MPF is also consistent with previous results.
△ Less
Submitted 13 April, 2017;
originally announced April 2017.
-
A method for designing the variable-channel high-power cavity combiner
Authors:
Yongtao Liu,
Guirong Huang,
Lei Shang,
Hongxiang Lin,
Baiting Du
Abstract:
Cavity combiners have been put forward for high power combining due to their advantages of larger combining ability, variable input channels and less power loss. For a high power cavity combiner, it is better to keep the power loss ratio in a reasonable range, because large power loss would lead to strict requirements on the cooling system. A combiner with variable input channels is convenient for…
▽ More
Cavity combiners have been put forward for high power combining due to their advantages of larger combining ability, variable input channels and less power loss. For a high power cavity combiner, it is better to keep the power loss ratio in a reasonable range, because large power loss would lead to strict requirements on the cooling system. A combiner with variable input channels is convenient for outputting different power levels according to practical demands. In this paper, a method for designing a variable-channel high-power cavity combiner is proposed, based on the relation between input and output coupling coefficients obtained by analyzing the equivalent circuit of the cavity combiner. This method can put the designed cavity combiner in a matching state and keep its power loss rate in a reasonable range as the number of input channels changes. As an example, a cavity combiner with 500 MHz and variable input channels from 16 to 64 is designed, and the simulation results show that our proposed method is feasible.
△ Less
Submitted 1 June, 2016; v1 submitted 21 January, 2016;
originally announced January 2016.
-
High Resolution Image Reconstruction Method for a Double-plane PET System with Changeable Spacing
Authors:
Xiao-Yue Gu,
Wei Zhou,
Lin Li,
Peng-Fei Yin,
Lei-Min Shang,
Ming-Kai Yun,
Zhen-Rui Lu,
Xian-Chao Huang,
Long Wei
Abstract:
Positron Emission Mammography (PEM) imaging systems with the ability in detection of millimeter-sized tumors were developed in recent years. And some of them have been well used in clinical applications. In consideration of biopsy application, a double-plane detector configuration is practical for the convenience of breast immobilization. However, the serious blurring effect in the double-plane sy…
▽ More
Positron Emission Mammography (PEM) imaging systems with the ability in detection of millimeter-sized tumors were developed in recent years. And some of them have been well used in clinical applications. In consideration of biopsy application, a double-plane detector configuration is practical for the convenience of breast immobilization. However, the serious blurring effect in the double-plane system with changeable spacing for different breast size should be studied. Methods: We study a high resolution reconstruction method applicable for a double-plane PET system with a changeable detector spacing. Geometric and blurring components should be calculated at real time for different detector distance. Accurate geometric sensitivity is obtained with a tube area model. Resolution recovery is achieved by estimating blurring effects derived from simulated single gamma response information. Results: The results show that the new geometric modeling gives a more finite and smooth sensitivity weight in double-plane system. The blurring component yields contrast recovery levels that could not be reached without blurring modeling, as well as better visual recovery of the smallest spheres and better delineation of the structures in the reconstructed images. Statistical noise has lower variance at the voxel level with blurring modeling than without at matched resolution. Conclusion: In the distance-changeable double-plane PET, the finite resolution modeling during reconstruction achieves resolution recovery, without noise amplification.
△ Less
Submitted 15 July, 2015;
originally announced July 2015.
-
A new electromagnetic code for ICRF antenna in EAST
Authors:
Hua Yang,
Cong-Feng Wu,
Sa Dong,
Xin-Jun Zhang,
Yan-** Zhao,
Lei Shang
Abstract:
The demand for an effective tool to help in the design of ion cyclotron radio frequency (ICRF) antenna system for fusion experiment has driven the development of predictive codes. A new electromagnetic code based on the method of moments (MOM) is described in the paper. The code computes the electromagnetic field by the solution of the electric field integral equation. The structure of ICRF antenn…
▽ More
The demand for an effective tool to help in the design of ion cyclotron radio frequency (ICRF) antenna system for fusion experiment has driven the development of predictive codes. A new electromagnetic code based on the method of moments (MOM) is described in the paper. The code computes the electromagnetic field by the solution of the electric field integral equation. The structure of ICRF antennas are discretized with triangular mesh. By using the new code, the scattering parameter and the surface current are given and compared with the result by commercial code CST. Moreover, the power spectra are studied with different toroidal phases for heating and current drive. Good agreement of simulation results between the new code and CST are obtained. The code has been validated against CST for EAST ICRF antenna.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
Start-to-end simulation of the injector for a compact THz source
Authors:
J. Li,
Y. J. Pei,
L. Shang,
G. Feng,
T. Hu,
Q. Chen,
C. Li
Abstract:
Terahertz radiation has broad application prospect due to its ability to penetrate deep into many organic materials without damage caused by ionizing radiations. A FEL-based THz source is the best choice to produce high-power radiation. In this paper, a 14 MeV injector is introduced for generating high-quality beam for FEL, which is composed of an EC-ITC RF gun, compensating coils and a travelling…
▽ More
Terahertz radiation has broad application prospect due to its ability to penetrate deep into many organic materials without damage caused by ionizing radiations. A FEL-based THz source is the best choice to produce high-power radiation. In this paper, a 14 MeV injector is introduced for generating high-quality beam for FEL, which is composed of an EC-ITC RF gun, compensating coils and a travelling-wave structure. Start-to-end simulation has been done with ASTRA code to verify the design and to optimize parameters. Simulation of operating mode at 6 MeV is also executed.
△ Less
Submitted 29 October, 2013;
originally announced October 2013.
-
Design of an electron gun for terahertz radiation source
Authors:
Ji Li,
Y. J. Pei,
Tongning Hu,
Qushan Chen,
Guangyao Feng,
Lei Shang,
Chenglong Li
Abstract:
With the aim to obtain short-pulse bunches with high peak current for a terahertz radiation source, an EC-ITC (External-Cathode Independently Tunable Cells) RF gun was employed. As the external injecting electron source of the ITC RF gun, a gridded DC gun plays a key role, the performance of which determines the beam quality in the injector and transport line. In order to make the beam well compre…
▽ More
With the aim to obtain short-pulse bunches with high peak current for a terahertz radiation source, an EC-ITC (External-Cathode Independently Tunable Cells) RF gun was employed. As the external injecting electron source of the ITC RF gun, a gridded DC gun plays a key role, the performance of which determines the beam quality in the injector and transport line. In order to make the beam well compressed in the ITC RF gun, the energy of the electrons acquired from the gridded DC gun should be 15 KeV at most. A proper structure of the gridded gun is shown to overcome the strong space- charge force on the cathode, which is able to generate 6 μs beam with 4.5A current successfully.
△ Less
Submitted 3 June, 2013;
originally announced June 2013.
-
Injection Control System of HLS Storage Ring
Authors:
Gongfa Liu,
**gyi Li,
Weimin Li,
Chuan Li,
Kaihong Li,
Lei Shang
Abstract:
The injection control system of Hefei Light Source (HLS) storage ring is a subsystem of the upgraded HLS control system, which is based upon EPICS. Three programmable logic controllers (PLCs) are used as device controllers, which control one septum modulator and four kicker modulators of HLS storage ring. An Industrial PC is used as Input/Output Controller (IOC) and it connects the PLCs with ser…
▽ More
The injection control system of Hefei Light Source (HLS) storage ring is a subsystem of the upgraded HLS control system, which is based upon EPICS. Three programmable logic controllers (PLCs) are used as device controllers, which control one septum modulator and four kicker modulators of HLS storage ring. An Industrial PC is used as Input/Output Controller (IOC) and it connects the PLCs with serial communication (RS232 mode) over fibre. A PC with Linux is used as operator interface (OPI), operator application are running on it. The control system was completed in July 2000. The commissioning shows that the control system is reliable and easy operational.
△ Less
Submitted 22 November, 2001;
originally announced November 2001.
