-
Harnessing Complexity: Nonlinear Optical Phenomena in L-Shapes, Nanocrescents, and Split-Ring Resonators
Authors:
Michael R. Clark,
Syed A. Shah,
Andrei Piryatinski,
Maxim Sukharev
Abstract:
We conduct systematic studies of the optical characteristics of plasmonic nanoparticles that exhibit C2v symmetry. We analyze three distinct geometric configurations: an L-type shape, a crescent, and a split-ring resonator. Optical properties are examined using the FDTD method. It is demonstrated that all three shapes exhibit two prominent plasmon bands associated with the two axes of symmetry. Th…
▽ More
We conduct systematic studies of the optical characteristics of plasmonic nanoparticles that exhibit C2v symmetry. We analyze three distinct geometric configurations: an L-type shape, a crescent, and a split-ring resonator. Optical properties are examined using the FDTD method. It is demonstrated that all three shapes exhibit two prominent plasmon bands associated with the two axes of symmetry. This is in addition to a wide range of resonances observed at high frequencies corresponding to quadrupole modes and peaks due to sharp corners. Next, to facilitate nonlinear analysis, we employ a semiclassical hydrodynamic model where the electron pressure term is explicitly accounted for. Employing this model enables us to rigorously examine the second-order angular resolved nonlinear optical response of these nanoparticles in each of the three configurations. For CW pum**, we explore properties of the SHG. Polarization and angle-resolved SHG spectra are obtained, revealing strong dependence on the nanoparticle geometry and incident wave polarization. For pulsed excitations, we discuss the phenomenon of broadband THz generation induced by the DFG. It is shown that the THz emission spectra exhibit unique features attributed to the plasmonic resonances and symmetry of the nanoparticles. The polarization of the generated THz waves is also examined, revealing interesting patterns tied to the nanoparticle geometry. To gain deeper insight, we propose a simple analytical theory that agrees very well with the numerical experiments. An expression for the far-field THz intensity is derived in terms of the incident pulse parameters and the nonlinear response tensor of the nanoparticle. The results presented in this work offer new insights into the linear and nonlinear optical properties of nanoparticles with C2v symmetry.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Analogue simulations of quantum gravity with fluids
Authors:
Samuel L. Braunstein,
Mir Faizal,
Lawrence M. Krauss,
Francesco Marino,
Naveed A. Shah
Abstract:
The recent technological advances in controlling and manipulating fluids have enabled the experimental realization of acoustic analogues of gravitational black holes. A flowing fluid provides an effective curved spacetime on which sound waves can propagate, allowing the simulation of gravitational geometries and related phenomena. The last decade has witnessed a variety of hydrodynamic experiments…
▽ More
The recent technological advances in controlling and manipulating fluids have enabled the experimental realization of acoustic analogues of gravitational black holes. A flowing fluid provides an effective curved spacetime on which sound waves can propagate, allowing the simulation of gravitational geometries and related phenomena. The last decade has witnessed a variety of hydrodynamic experiments testing disparate aspects of black hole physics culminating in the recent experimental evidence of Hawking radiation and Penrose superradiance. In this Perspective, we discuss the potential use of analogue hydrodynamic systems beyond classical general relativity towards the exploration of quantum gravitational effects. These include possible insights into the information-loss paradox, black hole physics with Planck-scale quantum corrections, emergent gravity scenarios and the regularization of curvature singularities. We aim at bridging the gap between the non-overlap** communities of experimentalists working with classical and quantum fluids and quantum-gravity theorists, illustrating the opportunities made possible by the latest experimental and theoretical developments in these important areas of research
△ Less
Submitted 25 February, 2024;
originally announced February 2024.
-
Requirements for probing chiral Casimir-Polder forces in a molecular Talbot-Lau interferometer
Authors:
Fumika Suzuki,
S. A. Shah,
Diego A. R. Dalvit,
Markus Arndt
Abstract:
We theoretically investigate the influence of chiral Casimir-Polder (CP) forces in Talbot-Lau interferometry, based on three nanomechanical gratings. We study scenarios where the second grating is either directly written into a chiral material or where the nanomask is coated with chiral substances. We show requirements for probing enantiospecific effects in matter-wave interferometry in the transm…
▽ More
We theoretically investigate the influence of chiral Casimir-Polder (CP) forces in Talbot-Lau interferometry, based on three nanomechanical gratings. We study scenarios where the second grating is either directly written into a chiral material or where the nanomask is coated with chiral substances. We show requirements for probing enantiospecific effects in matter-wave interferometry in the transmission signal and the interference fringe visibility, which depend on the de Broglie wavelength and the molecular chirality. The proposed setup is particularly sensitive to CP forces in the non-retarded regime where chiral effects can be comparable in magnitude to their electric and magnetic counterparts. While the first and third gratings do not change the phase of the matter wave, applying a coating of chiral substances to them enhances the instrument's chiral selectivity.
△ Less
Submitted 10 April, 2024; v1 submitted 15 February, 2024;
originally announced February 2024.
-
Searches for long-lived particles with the ANUBIS experiment
Authors:
Aashaq Shah
Abstract:
In recent years, there has been growing interest in the search for long-lived particles (LLPs), as predicted by various extensions of the Standard Model (SM). The AN Underground Belayed In-Shaft search experiment (ANUBIS) was proposed to search for such particles by instrumenting CERN's ATLAS underground cavern with tracking detectors. This report provides an overview of the current efforts to rea…
▽ More
In recent years, there has been growing interest in the search for long-lived particles (LLPs), as predicted by various extensions of the Standard Model (SM). The AN Underground Belayed In-Shaft search experiment (ANUBIS) was proposed to search for such particles by instrumenting CERN's ATLAS underground cavern with tracking detectors. This report provides an overview of the current efforts to realize the ANUBIS project focusing on the latest optimized detector geometry and the installation of proANUBIS -- a prototype or proof-of-concept demonstrator. The latter aims to offer insights into anticipated backgrounds for the ANUBIS experiment and demonstrate the feasibility of such a project. The ongoing efforts are needed to contribute to the continuous optimization and development of the ANUBIS project.
△ Less
Submitted 24 January, 2024; v1 submitted 21 January, 2024;
originally announced January 2024.
-
Installation of proANUBIS -- a proof-of-concept demonstrator for the ANUBIS experiment
Authors:
Aashaq Shah
Abstract:
AN Underground Belayed In-Shaft search experiment (ANUBIS) was proposed to search for neutral long-lived particles (LLPs) at CERN's ATLAS underground cavern. A prototype or a proof-of-concept demonstrator detector - proANUBIS was recently installed to prove the feasibility of such an experiment. The prototype demonstrator is expected to play a role in validating simulation studies and providing in…
▽ More
AN Underground Belayed In-Shaft search experiment (ANUBIS) was proposed to search for neutral long-lived particles (LLPs) at CERN's ATLAS underground cavern. A prototype or a proof-of-concept demonstrator detector - proANUBIS was recently installed to prove the feasibility of such an experiment. The prototype demonstrator is expected to play a role in validating simulation studies and providing insights into the anticipated backgrounds for the ANUBIS experiment. The current report provides an overview of the experimental setup for this prototype detector, and its commissioning and installation details.
△ Less
Submitted 24 January, 2024; v1 submitted 18 January, 2024;
originally announced January 2024.
-
Emission engineering in monolithically integrated silicon nitride microring resonators
Authors:
Kishor Kumar Mandal,
Anuj Kumar Singh,
Brijesh Kumar,
Amit P. Shah,
Rishabh Vij,
Amrita Majumder,
Janhavi Jayawant Khunte,
Venu Gopal Achanta,
Anshuman Kumar
Abstract:
Monolithic integration of solid-state color centers with photonic elements of the same material is a promising approach to overcome the constraints of fabrication complexity and coupling losses in traditional hybrid integration approaches. A wide band-gap, low-loss silicon nitride (SiN) platform is a mature technology, having CMOS compatibility, widely used in hybrid integrated photonics and optoe…
▽ More
Monolithic integration of solid-state color centers with photonic elements of the same material is a promising approach to overcome the constraints of fabrication complexity and coupling losses in traditional hybrid integration approaches. A wide band-gap, low-loss silicon nitride (SiN) platform is a mature technology, having CMOS compatibility, widely used in hybrid integrated photonics and optoelectronics. However, it has been shown that certain growth conditions enable the SiN material to host color centers, whose origin is currently under investigation. In this work, we have engineered a novel technique for the efficient coupling of these intrinsic emitters into the whispering gallery modes (WGMs) of the SiN microring cavity -- which has not been explored previously. We have engineered a subwavelength-sized notch into the rim of the SiN microring structure, to optimize the collection efficiency of the cavity-coupled enhanced photoluminescence (PL) spectra at room temperature. The platform presented in this work will enable the development of monolithic integration of color centers with nanophotonic elements for application to quantum photonic technologies.
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
A universal approximation for conductance blockade in thin nanopore membranes
Authors:
Arjav Shah,
Shakul Pathak,
Slaven Garaj,
Martin Z. Bazant,
Ankur Gupta,
Patrick S. Doyle
Abstract:
Nanopore-based sensing platforms have transformed single-molecule detection and analysis. The foundation of nanopore translocation experiments lies in conductance measurements, yet existing models, which are largely phenomenological, are inaccurate in critical experimental conditions such as thin and tightly fitting pores. Of the two components of the conductance blockade, channel and access resis…
▽ More
Nanopore-based sensing platforms have transformed single-molecule detection and analysis. The foundation of nanopore translocation experiments lies in conductance measurements, yet existing models, which are largely phenomenological, are inaccurate in critical experimental conditions such as thin and tightly fitting pores. Of the two components of the conductance blockade, channel and access resistance, the access resistance is poorly modeled. We present a comprehensive investigation into the access resistance and associated conductance blockade in thin nanopore membranes. By combining a first-principles approach, multi-scale modeling, and experimental validation, we propose a unified theoretical modeling framework. The analytical model derived as a result surpasses current approaches across a broad parameter range. Beyond advancing theoretical understanding, our framework's versatility enables analyte size inference and predictive insights into conductance blockade behavior. Our results will facilitate the design and optimization of nanopore devices for diverse applications, including nanopore base calling and data storage.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Interplay of gain and loss in arrays of nonlinear plasmonic nanoparticles: toward parametric downconversion and amplification
Authors:
Syed A. Shah,
Michael R. Clark,
Joseph Zyss,
Maxim Sukharev,
Andrei Piryatinski
Abstract:
With the help of a theoretical model and finite-difference-time-domain simulations based on the hydrodynamic-Maxwell model, we examine the effect of difference frequency generation in an array of L-shaped metal nano-particles characterized by intrinsic plasmonic nonlinearity. The outcomes of the calculations reveal the spectral interplay of the gain and loss in the vicinity of the fundamental freq…
▽ More
With the help of a theoretical model and finite-difference-time-domain simulations based on the hydrodynamic-Maxwell model, we examine the effect of difference frequency generation in an array of L-shaped metal nano-particles characterized by intrinsic plasmonic nonlinearity. The outcomes of the calculations reveal the spectral interplay of the gain and loss in the vicinity of the fundamental frequency of the localized surface-plasmon resonances. Subsequently, we identify different array depths and pum** regimes facilitating parametric amplification and parametric down-conversion. Our results suggest that the parametric amplification regime becomes feasible on a scale of hundreds of nanometers and parametric downconversion on the scale of tens of nanometers, opening up new exciting opportunities for develo** building blocks of photonic metasurfaces.
△ Less
Submitted 5 February, 2024; v1 submitted 11 December, 2023;
originally announced December 2023.
-
The Unsteady Lift Produced by a Flat-Plate Wing Translating Past Finite Obstacles
Authors:
Karan A. Shah,
Matthew J. Ringuette
Abstract:
The unsteady lift of a high-angle-of-attack, flat-plate wing encountering finite-length obstacles is studied using towing-tank force measurements. The wing translates from rest and interacts with a rectangular channel, ceiling, or ground obstacle. Variations with angle of attack, obstacle length, mid-chord height to the obstacle, and starting distance between the wing leading edge (LE) and obstacl…
▽ More
The unsteady lift of a high-angle-of-attack, flat-plate wing encountering finite-length obstacles is studied using towing-tank force measurements. The wing translates from rest and interacts with a rectangular channel, ceiling, or ground obstacle. Variations with angle of attack, obstacle length, mid-chord height to the obstacle, and starting distance between the wing leading edge (LE) and obstacle (typically 1 chord) are examined. For channels, as the gap height decreases, circulatory-lift peaks attributed to leading-edge vortices (LEVs) are the largest, and from the second peak onward occur earliest. This is likely from wing blockage enhancing the flow speed. The lift reduces while exiting a channel, and is lowest afterward if exiting during a lift peak. For ceilings, the first circulatory-lift maximum increases for smaller LE-to-ceiling gaps, but for gaps of 0.5 chords or less, subsequent peaks are below the no-obstacle case yet still earlier. For grounds, with lower wing height the first circulatory-lift peak is larger but the second peak's behavior varies with angle of attack, and the lift decreases near the ground end. Grounds affect peak timing the least, indicating a reduced influence on the LEV. Changing the starting distance to a channel alters the lift, likely from different LEV timing.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Correlated noise enhances coherence and fidelity in coupled qubits
Authors:
Eric R Bittner,
Hao Li,
Syad A. Shah,
Carlos Silva,
Andrei Piryatinski
Abstract:
It is generally assumed that environmental noise arising from thermal fluctuations is detrimental to preserving coherence and entanglement in a quantum system. In the simplest sense, dephasing and decoherence are tied to energy fluctuations driven by coupling between the system and the normal modes of the bath. Here, we explore the role of noise correlation in an open-loop model quantum communicat…
▽ More
It is generally assumed that environmental noise arising from thermal fluctuations is detrimental to preserving coherence and entanglement in a quantum system. In the simplest sense, dephasing and decoherence are tied to energy fluctuations driven by coupling between the system and the normal modes of the bath. Here, we explore the role of noise correlation in an open-loop model quantum communication system whereby the ``sender'' and the ``receiver'' are subject to local environments with various degrees of correlation or anticorrelation. We introduce correlation within the spectral density by solving a multidimensional stochastic differential equations and introduce these into the Redfield equations of motion for the system density matrix. We find that correlation can enhance both the fidelity and purity of a maximally entangled (Bell) state. Moreover, by comparing the evolution of different initial Bell states, we show that one can effectively probe the correlation between two local environments. These observations may be useful in the design of high-fidelity quantum gates and communication protocols.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Implantable and Ingestible Antenna Systems: From imagination to realization
Authors:
Abdul Basir,
Youngdae Cho,
Izaz Ali Shah,
Shahzeb Hayat,
Sana Ullah,
Muhammad Zada,
Syed Ahson Ali Shah,
Hyoungsuk Yoo
Abstract:
Biomedical implantable technologies are life-saving modalities for millions of people globally because of their abilities of wireless remote monitoring, regulating the abnormal functions of internal organs, and early detection of cognitive disorders. Enabling these devices with wireless functionalities, implantable antennas are the crucial front-end component of them. Detailed overviews of the imp…
▽ More
Biomedical implantable technologies are life-saving modalities for millions of people globally because of their abilities of wireless remote monitoring, regulating the abnormal functions of internal organs, and early detection of cognitive disorders. Enabling these devices with wireless functionalities, implantable antennas are the crucial front-end component of them. Detailed overviews of the implantable and ingestible antennas, their types, miniaturization techniques, measurement phantoms, biocompatibility issues, and materials are available in the literature. This article comprehensively reviews the design processes, design techniques and methods, types of antennas, electromagnetic (EM) simulators, and radiofrequency (RF) bands used for implantable and ingestible antennas. We briefly discussed the latest advancements in this field and extended their scope beyond conventional implantable applications. Their related issues and challenges are highlighted, and the performance enhancement techniques have been discussed in detail. All the scoped implantable applications have been covered in this review. A standard protocol has been devised to provide a simple and efficient roadmap for the design and realization of the implantable and ingestible antenna for future RF engineers and researchers. This protocol minimizes the errors in simulations and measurements by enhancing the agreement between simulated and measured results and simplifies the process of development of implantable and ingestible antennas. It generalizes the process from idea-to-realization-to-commercialization and provides an easy roadmap for the industry.
△ Less
Submitted 4 June, 2023;
originally announced June 2023.
-
Machine Learning based tool for CMS RPC currents quality monitoring
Authors:
E. Shumka,
A. Samalan,
M. Tytgat,
M. El Sawy,
G. A. Alves,
F. Marujo,
E. A. Coelho,
E. M. Da Costa,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
D. De Jesus Damiao,
M. Thiel,
K. Mota Amarilo,
M. Barroso Ferreira Filho,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov
, et al. (83 additional authors not shown)
Abstract:
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly m…
▽ More
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
RPC based tracking system at CERN GIF++ facility
Authors:
K. Mota Amarilo,
A. Samalan,
M. Tytgat,
M. El Sawy,
G. A. Alves,
F. Marujo,
E. A. Coelho,
E. M. Da Costa,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
D. De Jesus Damiao,
M. Thiel,
M. Barroso Ferreira Filho,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov
, et al. (83 additional authors not shown)
Abstract:
With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system…
▽ More
With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system which is exposed to many fake hits from the gamma background. A tracking system using RPCs is implemented to clean the fake hits, taking profit of the high muon efficiency of these chambers. This work will present the tracking system configuration, used detector analysis algorithm and results.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
QuDPy: A Python-Based Tool For Computing Ultrafast Non-linear Optical Responses
Authors:
S. A. Shah,
Hao Li,
Eric R. Bittner,
Carlos Silva,
Andrei Piryatinski
Abstract:
Nonlinear Optical Spectroscopy is a well-developed field with theoretical and experimental advances that have aided multiple fields including chemistry, biology and physics. However, accurate quantum dynamical simulations based on model Hamiltonians are need to interpret the corresponding multi-dimensional spectral signals properly. In this article, we present the initial release of our code, QuDP…
▽ More
Nonlinear Optical Spectroscopy is a well-developed field with theoretical and experimental advances that have aided multiple fields including chemistry, biology and physics. However, accurate quantum dynamical simulations based on model Hamiltonians are need to interpret the corresponding multi-dimensional spectral signals properly. In this article, we present the initial release of our code, QuDPy (quantum dynamics in python) which addresses the need for a robust numerical platform for performing quantum dynamics simulations based on model systems, including open quantum systems. An important feature of our approach is that one can specify various high-order optical response pathways in the form of double-sided Feynman diagrams via a straightforward input syntax that specifies the time-ordering of ket-sided or bra-sided optical interactions acting upon the time-evolving density matrix of the system. We use the quantum dynamics capabilities of QuTip for simulating the spectral response of complex systems to compute essentially any n-th-order optical response of the model system. We provide a series of example calculations to illustrate the utility of our approach.
△ Less
Submitted 24 July, 2023; v1 submitted 28 October, 2022;
originally announced October 2022.
-
Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
T. Beyrouthy,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (157 additional authors not shown)
Abstract:
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co…
▽ More
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Nonadiabatic decay of metastable states on coupled linear potentials
Authors:
Alisher Duspayev,
Ansh Shah,
Georg Raithel
Abstract:
Avoided crossings of level pairs with opposite slopes can form potential energy curves for the external degree of freedom of quantum particles. We investigate nonadiabatic decay of metastable states on such avoided crossings (MSACs) using diabatic and adiabatic representations. The system is described by a single scaled adiabaticity parameter, $V$. The time-independent two-component Schrödinger eq…
▽ More
Avoided crossings of level pairs with opposite slopes can form potential energy curves for the external degree of freedom of quantum particles. We investigate nonadiabatic decay of metastable states on such avoided crossings (MSACs) using diabatic and adiabatic representations. The system is described by a single scaled adiabaticity parameter, $V$. The time-independent two-component Schrödinger equation is solved in both representations, and the nonadiabatic lifetimes of MSACs are determined from a wave-function flux calculation and from the Breit-Wigner formula, leading to four lifetime values for each MSAC. We also solve the time-dependent Schrödinger equation in both pictures and derive the MSAC lifetimes from wave-function decay. The sets of six non-perturbative values for the MSAC lifetimes agree well, validating the approaches. As the adiabaticity parameter $V$ is increased by about a factor of ten, the MSAC character transitions from marginally to highly stable, with the lifetimes increasing by about ten orders of magnitude. The $ν$-dependence of the lifetimes in several regimes is discussed. Time-dependent perturbation theory is found to yield approximate lifetimes that deviate by $\lesssim 30\%$ from the non-perturbative results, while predictions based on the semi-classical Landau-Zener tunneling equation are found to be up to a factor of twenty off, over the ranges of $V$ and $ν$ studied. The results are relevant to numerous atomic and molecular systems with quantum states on intersecting, coupled potential energy curves.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
Upgrade of the CMS Resistive Plate Chambers for the High Luminosity LHC
Authors:
A. Samalan,
M. Tytgat,
G. A. Alves,
F. Marujo,
F. Torres Da Silva De Araujo,
E. M. DaCosta,
D. De Jesus Damiao,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
M. Bonchev,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov,
S. J. Qian,
C. Bernal,
A. Cabrera
, et al. (86 additional authors not shown)
Abstract:
During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solen…
▽ More
During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solenoid (CMS) experiment. To ensure a highly performing muon system for this period, several upgrades of the Resistive Plate Chamber (RPC) system of the CMS are currently being implemented. These include the replacement of the readout system for the present system, and the installation of two new RPC stations with improved chamber and front-end electronics designs. The current overall status of this CMS RPC upgrade project is presented.
△ Less
Submitted 2 November, 2021; v1 submitted 29 September, 2021;
originally announced September 2021.
-
Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi,
O. Bouhali
, et al. (156 additional authors not shown)
Abstract:
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstr…
▽ More
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector.
△ Less
Submitted 22 September, 2021; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Modeling the triple-GEM detector response to background particles for the CMS Experiment
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
I. Azhgirey,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (164 additional authors not shown)
Abstract:
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The…
▽ More
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi,
O. Bouhali
, et al. (156 additional authors not shown)
Abstract:
We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequent…
▽ More
We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design.
△ Less
Submitted 20 September, 2020;
originally announced September 2020.
-
A Review on the State of the Art in Non Contact Sensing for COVID-19
Authors:
William Taylor,
Qammer H. Abbasi,
Kia Dashtipour,
Shuja Ansari,
Aziz Shah,
Arslan Khan,
Muhammad Ali Imran
Abstract:
COVID-19 disease, caused by SARS-CoV-2, has resulted in a global pandemic recently. With no approved vaccination or treatment, governments around the world have issued guidance to their citizens to remain at home in efforts to control the spread of the disease. The goal of controlling the spread of the virus is to prevent strain on hospital. In this paper, we have focus on how non-invasive methods…
▽ More
COVID-19 disease, caused by SARS-CoV-2, has resulted in a global pandemic recently. With no approved vaccination or treatment, governments around the world have issued guidance to their citizens to remain at home in efforts to control the spread of the disease. The goal of controlling the spread of the virus is to prevent strain on hospital. In this paper, we have focus on how non-invasive methods are being used to detect the COVID-19 and assist healthcare workers in caring for COVID-19 patients. Early detection of the COVID-19 virus can allow for early isolation to prevent further spread. This study outlines the advantages and disadvantages and a breakdown of the methods applied in the current state-of-the-art approaches. In addition, the paper highlights some future research directions, which are required to be explored further to come up with innovative technologies to control this pandemic.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
CMS RPC Background -- Studies and Measurements
Authors:
R. Hadjiiska,
A. Samalan,
M. Tytgat,
N. Zaganidis,
G. A. Alves,
F. Marujo,
F. Torres Da Silva De Araujo,
E. M. Da Costa,
D. De Jesus Damiao,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
A. Aleksandrov,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Sultanov,
M. Bonchev,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov,
S. J. Qian,
C. Bernal
, et al. (84 additional authors not shown)
Abstract:
The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be upd…
▽ More
The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be updated with the final geometry description, once it is available. The radiation background has been studied in terms of expected particle rates, absorbed dose and fluence. Two High Luminosity LHC (HL-LHC) scenarios have been investigated - after collecting $3000$ and $4000$ fb$^{-1}$. Estimations with safety factor of 3 have been considered, as well.
△ Less
Submitted 13 December, 2020; v1 submitted 26 May, 2020;
originally announced May 2020.
-
CMS RPC Activities During LHC LS-2
Authors:
Mehar Ali Shah
Abstract:
The second LHC long shutdown period (LS2) is an important opportunity for the CMS Resistive Plate Chambers (RPC) to complete their consolidation and upgrade projects. The consolidation includes detector maintenance for gas tightness, HV (high voltage), LV (low voltage) and slow control operation. All services for the RPC Phase-2 upgrade, namely RE3/1 and RE4/1, were anticipated for installation to…
▽ More
The second LHC long shutdown period (LS2) is an important opportunity for the CMS Resistive Plate Chambers (RPC) to complete their consolidation and upgrade projects. The consolidation includes detector maintenance for gas tightness, HV (high voltage), LV (low voltage) and slow control operation. All services for the RPC Phase-2 upgrade, namely RE3/1 and RE4/1, were anticipated for installation to LS2. This paper summarises the RPC system maintenance and upgrade activities.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Experiences from the RPC data taking during the CMS RUN-2
Authors:
Mehar Ali Shah
Abstract:
The CMS experiment recorded 177.75 /fb of proton-proton collision data during the RUN-1 and RUN-2 data taking period. Successful data taking at increasing instantaneous luminosities with the evolving detector configuration was a big achievement of the collaboration. The CMS RPC system provided redundant information for the robust muon triggering, reconstruction, and identification. To ensure stabl…
▽ More
The CMS experiment recorded 177.75 /fb of proton-proton collision data during the RUN-1 and RUN-2 data taking period. Successful data taking at increasing instantaneous luminosities with the evolving detector configuration was a big achievement of the collaboration. The CMS RPC system provided redundant information for the robust muon triggering, reconstruction, and identification. To ensure stable data taking, the CMS RPC collaboration has performed detector operation, calibration, and performance studies. Various software and related tools are developed and maintained accordingly. In this paper, the overall performance of the CMS RPC system and experiences of the data taking during the RUN-2 period are summarised.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Assimilation of semi-qualitative sea ice thickness data with the EnKF-SQ
Authors:
Abhishek Shah,
Laurent Bertino,
Francois Counillon,
Mohamad El Gharamti,
Abstract:
A newly introduced stochastic data assimilation method, the Ensemble Kalman Filter Semi-Qualitative (EnKF-SQ) is applied to a realistic coupled ice-ocean model of the Arctic, the TOPAZ4 configuration, in a twin experiment framework. The method is shown to add value to range-limited thin ice thickness measurements, as obtained from passive microwave remote sensing, with respect to more trivial solu…
▽ More
A newly introduced stochastic data assimilation method, the Ensemble Kalman Filter Semi-Qualitative (EnKF-SQ) is applied to a realistic coupled ice-ocean model of the Arctic, the TOPAZ4 configuration, in a twin experiment framework. The method is shown to add value to range-limited thin ice thickness measurements, as obtained from passive microwave remote sensing, with respect to more trivial solutions like neglecting the out-of-range values or assimilating climatology instead. Some known properties inherent to the EnKF-SQ are evaluated: the tendency to draw the solution closer to the thickness threshold, the skewness of the resulting analysis ensemble and the potential appearance of outliers. The experiments show that none of these properties prove deleterious in light of the other sub-optimal characters of the sea ice data assimilation system used here (non-linearities, non-Gaussian variables, lack of strong coupling). The EnKF-SQ has a single tuning parameter that is adjusted for best performance of the system at hand. The sensitivity tests reveal that the results do not depend critically on the choice of this tuning parameter. The EnKF-SQ makes overall a valid approach for assimilating semi-qualitative observations into high-dimensional nonlinear systems.
△ Less
Submitted 29 April, 2019;
originally announced April 2019.
-
Scattering Mechanisms and Modeling for Terahertz Wireless Communications
Authors:
Shihao Ju,
Syed Hashim Ali Shah,
Muhammad Affan Javed,
Jun Li,
Girish Palteru,
Jyotish Robin,
Yunchou Xing,
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
This paper provides an analysis of radio wave scattering for frequencies ranging from the microwave to the Terahertz band (e.g., 1 GHz - 1 THz), by studying the scattering power reradiated from various types of materials with different surface roughnesses. First, fundamentals of scattering and reflection are developed and explained for use in wireless mobile radio, and the effect of scattering on…
▽ More
This paper provides an analysis of radio wave scattering for frequencies ranging from the microwave to the Terahertz band (e.g., 1 GHz - 1 THz), by studying the scattering power reradiated from various types of materials with different surface roughnesses. First, fundamentals of scattering and reflection are developed and explained for use in wireless mobile radio, and the effect of scattering on the reflection coefficient for rough surfaces is investigated. Received power is derived using two popular scattering models - the directive scattering (DS) model and the radar cross section (RCS) model through simulations over a wide range of frequencies, materials, and orientations for the two models, and measurements confirm the accuracy of the DS model at 140 GHz. This paper shows that scattering can become a prominent propagation mechanism as frequencies extend to millimeter-wave (mmWave) and beyond, but at other times can be treated like simple reflection. Knowledge of scattering effects is critical for appropriate and realistic channel models, which further support the development of massive multiple input-multiple output (MIMO) techniques, localization, ray tracing tool design, and imaging for future 5G and 6G wireless systems.
△ Less
Submitted 8 March, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Layout and Assembly Technique of the GEM Chambers for the Upgrade of the CMS First Muon Endcap Station
Authors:
Aashaq Shah,
CMS-Muon Collaboration
Abstract:
Triple-GEM detector technology was recently selected by CMS for a part of the upgrade of its forward muon detector system as GEM detectors provide a stable operation in the high radiation environment expected during the future High-Luminosity phase of the Large Hadron Collider (HL-LHC). In a first step, GEM chambers (detectors) will be installed in the innermost muon endcap station in the…
▽ More
Triple-GEM detector technology was recently selected by CMS for a part of the upgrade of its forward muon detector system as GEM detectors provide a stable operation in the high radiation environment expected during the future High-Luminosity phase of the Large Hadron Collider (HL-LHC). In a first step, GEM chambers (detectors) will be installed in the innermost muon endcap station in the $1.6<\left|η\right|<2.2$ pseudo-rapidity region, mainly to control level-1 muon trigger rates after the second LHC Long Shutdown. These new chambers will add redundancy to the muon system in the $η$-region where the background rates are high, and the bending of the muon trajectories due to the CMS magnetic field is small. A novel construction technique for such chambers has been developed in such a way where foils are mounted onto a single stack and then uniformly stretched mechanically, avoiding the use of spacers and glue inside the active gas volume. We describe the layout, the stretching mechanism and the overall assembly technique of such GEM chambers.
△ Less
Submitted 11 December, 2018; v1 submitted 2 December, 2018;
originally announced December 2018.
-
Impact of Single-Mask Hole Asymmetry on the Properties of GEM Detectors
Authors:
Aashaq Shah,
Archana Sharma,
Ashok Kumar,
Jeremie Merlin,
Md. Naimuddin
Abstract:
A single-mask Gas Electron Multiplier (GEM) technique overcomes the cumbersome practice of alignment of two masks and allows the production of foils with very large area as needed for the CMS muon forward region upgrade. However, the holes obtained with refinements in the single-mask technique are asymmetrically bi-conical in shape compared to symmetrically bi-conical holes of double-mask technolo…
▽ More
A single-mask Gas Electron Multiplier (GEM) technique overcomes the cumbersome practice of alignment of two masks and allows the production of foils with very large area as needed for the CMS muon forward region upgrade. However, the holes obtained with refinements in the single-mask technique are asymmetrically bi-conical in shape compared to symmetrically bi-conical holes of double-mask technology. The hole geometry and their uniformity define the performance of the detectors which are constructed with such GEM foils. To evaluate the effect of this asymmetry, the foils have been characterized experimentally using a special prototype with three single-mask GEM foils. The structure allowed to change the orientation of foils, testing from above with foils having a large hole opening, testing from the bottom with all the foils having small hole opening. The effective gain, energy resolution and the charging up behavior are compared for the two different hole orientations.
△ Less
Submitted 13 November, 2018; v1 submitted 11 November, 2018;
originally announced November 2018.
-
The CMS RPC Detector Performance and Stability during LHC RUN-2
Authors:
M. A. Shah,
R. Hadjiska
Abstract:
The CMS experiment, located at the Large Hadron Collider (LHC) in CERN, has a redundant muon system composed by three different gaseous detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region), and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. The CMS RPC system confers…
▽ More
The CMS experiment, located at the Large Hadron Collider (LHC) in CERN, has a redundant muon system composed by three different gaseous detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region), and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. The CMS RPC system confers robustness and redundancy to the muon trigger. The RPC system operation in the challenging background and pileup conditions of the LHC environment is presented. The RPC system provides information to all muon track finders and thus contributing to both muon trigger and reconstruction. The summary of the detector performance results obtained with proton proton collision at 13 TeV during 2016 and 2017 data taking have been presented. The stability of the system is presented in terms of efficiency and cluster size vs time and increasing instantaneous luminosity. Data-driven predictions about the expected performance during High Luminosity LHC (HL-LHC) stage have been reported.
△ Less
Submitted 30 August, 2018;
originally announced August 2018.
-
High Rate RPC detector for LHC
Authors:
F. Lagarde,
A. Fagot,
M. Gul,
C. Roskas,
M. Tytgat,
N. Zaganidis,
S. Fonseca De Souza,
A. Santoro,
F. Torres Da Silva De Araujo,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Sultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov,
S. J. Qian,
D. Han,
W. Yi,
C. Avila,
A. Cabrera
, et al. (77 additional authors not shown)
Abstract:
The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\
{\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The…
▽ More
The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\
{\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The region with high pseudo rapidity ($η$) region of the forward muon spectrometer ($2.4 > |η| > 1.9$) is not equipped with RPC stations. The increase of the expected particles rate up to 2 kHz cm$^{-1}$ ( including a safety factor 3 ) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The current CMS RPC technology cannot sustain the expected background level. A new generation of Glass-RPC (GRPC) using low-resistivity glass was proposed to equip the two most far away of the four high $η$ muon stations of CMS. In their single-gap version they can stand rates of few kHz cm$^{-1}$. Their time precision of about 1 ns can allow to reduce the noise contribution leading to an improvement of the trigger rate. The proposed design for large size chambers is examined and some preliminary results obtained during beam tests at Gamma Irradiation Facility (GIF++) and Super Proton Synchrotron (SPS) at CERN are shown. They were performed to validate the capability of such detectors to support high irradiation environment with limited consequence on their efficiency.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
Performance of the triple GEM detector built using commercially manufactured GEM foils in India
Authors:
Mohit Gola,
Aashaq Shah,
Asar Ahmed,
Shivali Malhotra,
Ashok Kumar,
Md. Naimuddin
Abstract:
The Gas Electron Multiplier (GEM) detectors has been utilized for various applications due to their excellent spatial resolution, high rate capabilities and flexibility in design. The GEM detectors stand as a promising device to be used in nuclear and particle physics experiments. Many future experiments and upgrades are looking forward to use this technology leading to high demand of GEM foils. U…
▽ More
The Gas Electron Multiplier (GEM) detectors has been utilized for various applications due to their excellent spatial resolution, high rate capabilities and flexibility in design. The GEM detectors stand as a promising device to be used in nuclear and particle physics experiments. Many future experiments and upgrades are looking forward to use this technology leading to high demand of GEM foils. Until now, CERN is the only reliable manufacturer and distributor of GEM foils, but with technology transfer, few other industries across the globe have started manufacturing these foils employing the same photo-lithographic technique. The Micropack Pvt. Ltd. is one such industry in India which produced first few $10~cm ~\times~ 10~cm$ GEM foils, which were then distributed to few collaborating partners for testing reliability and performance of foils before they can be accepted by the scientific community. Characterization of three such foils have already been performed by studying their optical and electrical properties. Using these foils a triple GEM detector has been built and various performance characteristics have been measured. In this paper, we specifically report measurements on gain, resolution and response uniformity, by utilizing local quality control set-ups existing at University of Delhi.
△ Less
Submitted 13 June, 2018;
originally announced June 2018.
-
Development, Characterization and Qualification of first GEM foils produced in India
Authors:
Aashaq Shah,
Asar Ahmed,
Mohit Gola,
Ram krishna Sharma,
Shivali Malhotra,
Ashok Kumar,
Md. Naimuddin,
Pradeep Menon,
K. Srinivasan
Abstract:
The increasing demand for Gas Electron Multiplier (GEM) foils has been driven by their application in many current and proposed high-energy physics experiments. Micropack, a Bengaluru-based company, has established and commercialized GEM foils for the first time in India. Micropack used the double-mask etching technique to successfully produce 10 cm $\times$ 10 cm GEM foil. In this paper, we repor…
▽ More
The increasing demand for Gas Electron Multiplier (GEM) foils has been driven by their application in many current and proposed high-energy physics experiments. Micropack, a Bengaluru-based company, has established and commercialized GEM foils for the first time in India. Micropack used the double-mask etching technique to successfully produce 10 cm $\times$ 10 cm GEM foil. In this paper, we report on the development as well as the geometrical and electrical properties of these foils, including the size uniformity of the holes and leakage current measurements. Our characterization studies show that the foils are of good quality and satisfy all the necessary quality control criteria.
△ Less
Submitted 8 March, 2018;
originally announced March 2018.
-
Solar wind driven electrostatic instabilities with generalized r,q distribution function
Authors:
Warda Nasir,
Zahida Ehsan,
M. N. S. Qureshi,
H. A. Shah
Abstract:
Using Boltzmann Vlasov kinetic model with the flat-top non-Maxwellian distributed electrons and ions, a velocity power law energetic tail, known as the generalized r, q distribution, a current-less electrostatic instability namely ion acoustic which is driven by a stream of solar wind plasma is studied here. The instability threshold is affected and depends upon the spectral indices r and q. It is…
▽ More
Using Boltzmann Vlasov kinetic model with the flat-top non-Maxwellian distributed electrons and ions, a velocity power law energetic tail, known as the generalized r, q distribution, a current-less electrostatic instability namely ion acoustic which is driven by a stream of solar wind plasma is studied here. The instability threshold is affected and depends upon the spectral indices r and q. It is found that the growth rate increases with the decrease of spectral index. Moreover, such kinetic instability has also been discussed for a three species electron-ion-dust plasma using the generalized r, q distribution function. Such case is of interest when the solar wind is streaming through the cometary plasma in the presence of interstellar dust and excites electrostatic instabilities. In the limits of phase velocity of the waves larger and smaller than the thermal velocity of dust particles, the dispersion properties and growth rate of dust-acoustic mode are calculated analytically and has been plotted for different values of the spectral indices.
△ Less
Submitted 27 November, 2017;
originally announced November 2017.
-
R&D towards the CMS RPC Phase-2 upgrade
Authors:
A. Fagot,
A. Cimmino,
S. Crucy,
M. Gul,
A. A. O. Rios,
M. Tytgat,
N. Zaganidis,
S. Aly,
Y. Assran,
A. Radi,
A. Sayed,
G. Singh,
M. Abbrescia,
G. Iaselli,
M. Maggi,
G. Pugliese,
P. Verwilligen,
W. Van Doninck,
S. Colafranceschi,
A. Sharma,
L. Benussi,
S. Bianco,
D. Piccolo,
F. Primavera,
V. Bhatnagar
, et al. (71 additional authors not shown)
Abstract:
The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle…
▽ More
The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle named RE3/1 and RE4/1. These stations will use RPCs with finer granularity and good timing resolution to mitigate background effects and to increase the redundancy of the system.
△ Less
Submitted 14 June, 2016;
originally announced June 2016.
-
High rate, fast timing Glass RPC for the high η CMS muon detectors
Authors:
F. Lagarde,
M. Gouzevitch,
I. Laktineh,
V. Buridon,
X. Chen,
C. Combaret,
A. Eynard,
L. Germani,
G. Grenier,
H. Mathez,
L. Mirabito,
A. Petrukhin,
A. Steen,
W. Tromeuraa,
Y. Wang,
A. Gongab,
N. Moreau,
C. de la Taille,
F. Dulucqac,
A. Cimmino,
S. Crucy,
A. Fagot,
M. Gul,
A. A. O. Rios,
M. Tytgat
, et al. (86 additional authors not shown)
Abstract:
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expec…
▽ More
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expected particles rate up to $2 kHz/cm^{2}$ (including a safety factor 3) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The actual RPC technology of CMS cannot sustain the expected background level. The new technology that will be chosen should have a high rate capability and provides a good spatial and timing resolution. A new generation of Glass-RPC (GRPC) using low-resistivity (LR) glass is proposed to equip at least the two most far away of the four high $η$ muon stations of CMS. First the design of small size prototypes and studies of their performance in high-rate particles flux is presented. Then the proposed designs for large size chambers and their fast-timing electronic readout are examined and preliminary results are provided.
△ Less
Submitted 22 July, 2016; v1 submitted 4 June, 2016;
originally announced June 2016.
-
Comparison of CMS Resistive Plate Chambers performance during LHC RUN-1 and RUN-2
Authors:
Mehar Ali Shah
Abstract:
The Resistive Plate Chambers detector system at the CMS experiment at the LHC provides robustness and redundancy to the muon trigger. A total of 1056 double-gap chambers cover the pseudo-rapidity region < 1.6. The main detector parameters and environmental conditions are constantly and closely monitored to achieve operational stability and high quality data in the harsh conditions of the second ru…
▽ More
The Resistive Plate Chambers detector system at the CMS experiment at the LHC provides robustness and redundancy to the muon trigger. A total of 1056 double-gap chambers cover the pseudo-rapidity region < 1.6. The main detector parameters and environmental conditions are constantly and closely monitored to achieve operational stability and high quality data in the harsh conditions of the second run period of the LHC with center-of-mass energy of 13 TeV. First results of overall detector stability with 2015 data and comparisons with data from the LHC RUN-1 period at 8 TeV are presented.
△ Less
Submitted 30 May, 2016;
originally announced May 2016.
-
Performance of Resistive Plate Chambers installed during the first long shutdown of the CMS experiment
Authors:
M. Shopova,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
G. Sultanov,
M. Rodozov,
S. Stoykova,
Y. Assran,
A. Sayed,
A. Radi,
S. Aly,
G. Singh,
M. Abbrescia,
G. Iaselli,
M. Maggi,
G. Pugliese,
P. Verwilligen,
W. Van Doninck,
S. Colafranceschi,
A. Sharma,
L. Benussi,
S. Bianco,
D. Piccolo,
F. Primavera,
A. Cimmino
, et al. (71 additional authors not shown)
Abstract:
The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the L…
▽ More
The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the LHC (2013-2014) the CMS muon system has been upgraded with 144 newly installed RPCs on the forth forward stations. The new chambers ensure and enhance the muon trigger efficiency in the high luminosity conditions of the LHC Run2. The chambers have been successfully installed and commissioned. The system has been run successfully and experimental data has been collected and analyzed. The performance results of the newly installed RPCs will be presented.
△ Less
Submitted 22 May, 2016;
originally announced May 2016.
-
New longitudinal mode and compression of pair ions in plasma
Authors:
Zahida Ehsan,
N. L. Tsintsadze,
H. A. Shah,
R. M. G. M. Trines,
M. Imran
Abstract:
Positive and negative ions forming so-called pair plasma differing in sign of their charge but asymmetric in mass and temperature support a new acoustic mode where dam** of heavier ion dominates. The condition for the excitation of ion sound wave through electron beam induced Cherenkov instability is also investigated. This beam can generate a perturbation in the pair ion plasmas in the presence…
▽ More
Positive and negative ions forming so-called pair plasma differing in sign of their charge but asymmetric in mass and temperature support a new acoustic mode where dam** of heavier ion dominates. The condition for the excitation of ion sound wave through electron beam induced Cherenkov instability is also investigated. This beam can generate a perturbation in the pair ion plasmas in the presence of electrons when there is number density, temperature and mass difference in the two species of ions. Basic emphasis is on the focusing of ion sound waves and we show how, in the area of localization of wave energy, the density of pair particles increases while electrons are pushed away from that region. Further, this localization of wave is dependent on the shape of the pulse. Considering the example of pancake and bullet shaped pulses, we find that only the former leads to compression of pair ions in the supersonic regime of the focusing region. Here possible existence of regions where pure pair particles can exist may also be speculated which is not only useful from academic point of view but also to mimic the situation of plasma (electro positron asymmetric and symmetric) observed in astrophysical environment.
△ Less
Submitted 21 June, 2016; v1 submitted 16 March, 2016;
originally announced March 2016.
-
A novel application of Fiber Bragg Grating (FBG) sensors in MPGD
Authors:
D. Abbaneo,
M. Abbas,
M. Abbrescia,
A. A. Abdelalim,
M. Abi Akl,
O. Aboamer,
D. Acosta,
A. Ahmad,
W. Ahmed,
W. Ahmed,
A. Aleksandrov,
R. Aly,
P. Altieri,
C. Asawatangtrakuldee,
P. Aspell,
Y. Assran,
I. Awan,
S. Bally,
Y. Ban,
S. Banerjee,
V. Barashko,
P. Barria,
G. Bencze,
N. Beni,
L. Benussi
, et al. (133 additional authors not shown)
Abstract:
We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active are…
▽ More
We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements in material studies. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide GEM foils of the GE1/1 chambers. A network of FBG sensors have been used to determine the optimal mechanical tension applied and to characterise the mechanical tension that should be applied to the foils. We discuss the results of the test done on a full-sized GE1/1 final prototype, the studies done to fully characterise the GEM material, how this information was used to define a standard assembly procedure and possible future developments.
△ Less
Submitted 28 December, 2015;
originally announced December 2015.
-
Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors
Authors:
D. Abbaneo,
M. Abbas,
M. Abbrescia,
A. A. Abdelalim,
M. Abi Akl,
O. Aboamer,
D. Acosta,
A. Ahmad,
W. Ahmed,
W. Ahmed,
A. Aleksandrov,
R. Aly,
P. Altieri,
C. Asawatangtrakuldee,
P. Aspell,
Y. Assran,
I. Awan,
S. Bally,
Y. Ban,
S. Banerjee,
V. Barashko,
P. Barria,
G. Bencze,
N. Beni,
L. Benussi
, et al. (133 additional authors not shown)
Abstract:
A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.
A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.
△ Less
Submitted 28 December, 2015;
originally announced December 2015.
-
Quantum Field Theory in de Sitter spacetime
Authors:
Ashaq Hussain Sofi,
Muhammad Ashraf Shah,
Marlina Rosalinda Sibuea,
Shabir Ahmad Akhoon,
Bilal Nisar Khanday,
Sajad Ul Majeed,
Asloob Ahmad Rather,
Ishaq Nahvi
Abstract:
In this paper we will analyse quantum field theory on de Sitter spacetime. We will analyse a general scalar and vector field theory on de Sitter spacetime. This is done by first calculating these propagators on four-Sphere and then analytically continuing it to de Sitter spacetime.
In this paper we will analyse quantum field theory on de Sitter spacetime. We will analyse a general scalar and vector field theory on de Sitter spacetime. This is done by first calculating these propagators on four-Sphere and then analytically continuing it to de Sitter spacetime.
△ Less
Submitted 11 December, 2013; v1 submitted 1 December, 2013;
originally announced December 2013.
-
Application of Quantum Field Theory
Authors:
Ashaq Hussain Sofi,
Mohammad Ashraf Shah
Abstract:
In this paper we will analyse some interesting structures that occur in scalar quantum field theory. We will quantize this theory using path integrals. We will analyse the Bogomolny Bound for scalar quantum field theory in two dimensions. We will also analyse the generalization of this result to fractional powers of the differential operator.
In this paper we will analyse some interesting structures that occur in scalar quantum field theory. We will quantize this theory using path integrals. We will analyse the Bogomolny Bound for scalar quantum field theory in two dimensions. We will also analyse the generalization of this result to fractional powers of the differential operator.
△ Less
Submitted 10 October, 2013;
originally announced October 2013.
-
Inner Product in Quantum Field Theory
Authors:
Ashaq Hussain Sofi,
Muhammad Ashraf Shah
Abstract:
In this paper we will analyse the inner product for a general tensor field theory. We will first analyse a generalized inner product for scalar field theories. Then we will use it to construct a inner product for tensor field theories. We will use this inner product to construct the two-point function.
In this paper we will analyse the inner product for a general tensor field theory. We will first analyse a generalized inner product for scalar field theories. Then we will use it to construct a inner product for tensor field theories. We will use this inner product to construct the two-point function.
△ Less
Submitted 30 September, 2013;
originally announced September 2013.
-
Subsonic ion-acoustic solitons
Authors:
H. Abbasi,
H. Hakimi Pajouh,
H. A. Shah
Abstract:
In this paper, the nonlinear theory of plasma waves is extended to the plasmas that their equilibrium state are specified by the non-Maxwellian (here kappa) distribution. We believe that the extension is very important since most of the space and some of laboratory plasmas are not in the Maxwellian equilibrium. Although the linear theory of this issue has been known for the decades but, to our k…
▽ More
In this paper, the nonlinear theory of plasma waves is extended to the plasmas that their equilibrium state are specified by the non-Maxwellian (here kappa) distribution. We believe that the extension is very important since most of the space and some of laboratory plasmas are not in the Maxwellian equilibrium. Although the linear theory of this issue has been known for the decades but, to our knowledge, this is the first attempt in opening the gate to the nonlinear world of plasma waves with the non-Maxwellian equilibrium. As an example the ion-acoustic solitons are studied in this framework taking into account the electron trap** in the trough of longitudinal field. It is shown, as the most important result regarding to the non-Maxwillian equilibrium, that there is the possibility for the ion-acoustic solitons to move subsonically. The solitons velocity and their width are monotonically increasing functions of spectral index ($κ$) and approach to the their Maxwellian values as $κ\to \infty$.
△ Less
Submitted 2 May, 2005;
originally announced May 2005.
