-
Inferring the scrape-off layer heat flux width in a divertor with a low degree of axisymmetry
Authors:
C. Marsden,
X. Zhang,
M. Moscheni,
T. K. Gray,
E. Vekshina,
A. Rengle,
A. Scarabosio,
M. Sertoli,
M. Romanelli,
the ST40 team
Abstract:
Plasma facing components (PFCs) in the next generation of tokamak devices will operate in challenging environments, with heat loads predicted to exceed 10 MWm$^{-2}$. The magnitude of these heat loads is set by the width of the channel, the "scrape-off layer" (SOL), into which heat is exhausted, and can be characterised by an e-folding length scale for the decay of heat flux across the channel. It…
▽ More
Plasma facing components (PFCs) in the next generation of tokamak devices will operate in challenging environments, with heat loads predicted to exceed 10 MWm$^{-2}$. The magnitude of these heat loads is set by the width of the channel, the "scrape-off layer" (SOL), into which heat is exhausted, and can be characterised by an e-folding length scale for the decay of heat flux across the channel. It is expected this channel will narrow as tokamaks move towards reactor relevant conditions. Understanding the processes involved in setting the SOL heat flux width is imperative to be able to predict the heat loads PFCs must handle in future devices. Measurements of the SOL width are performed on the high-field spherical tokamak, ST40, using a newly commissioned infrared thermography system. With its high on-axis toroidal magnetic field ($\geq$1.5 T) ST40 is uniquely positioned to investigate the influence of toroidal field on the heat flux width in spherical tokamaks, whilst also extending measurements of the SOL width in spherical tokamaks to increased poloidal field ($\geq$0.3 T). Due to the divertor on ST40 having a low degree of axisymmetry, it is necessary for a set of radial measurements of the heat flux to be taken across the divertor, made possible using an automated toolchain that fully incorporates its 3D geometry. These radial profiles are combined with the magnetic topology of the plasma to infer the width of the SOL, with both single and double exponential profiles of heat flux observed. A reduction in the heat flux is observed toroidally across part of the divertor, with preliminary investigations indicating that partial shadowing occurs, resulting from the separation between magnetic field lines and trailing edges upstream of the observed region becoming comparable to the ion gyro-radius.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Experimental observations of bifurcated power decay lengths in the near Scrape-Off Layer of tokamak plasmas
Authors:
X Zhang,
C Marsden,
M Moscheni,
E Maartensson,
A Rengle,
M Robinson,
T OGorman,
H F Lowe,
E Vekshina,
S Janhunen,
P F Buxton,
M Sertoli,
M Romanelli,
A Scarabosio,
T K Gray,
N A Lopez,
the ST40 Team
Abstract:
The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group matches closely with the scale of ion poloidal Larmour radius and follows existing H-mode scalings, while the narrow group falls up to 10 times below scalings, on the scale of ion total Larmour radius. The onset of…
▽ More
The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group matches closely with the scale of ion poloidal Larmour radius and follows existing H-mode scalings, while the narrow group falls up to 10 times below scalings, on the scale of ion total Larmour radius. The onset of the narrow scrape-off layer width is observed to be associated with suppressed magnetic fluctuations, suggesting reduced electromagnetic turbulence levels in the SOL.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Integrated modelling and multiscale gyrokinetic validation study of ETG turbulence in a JET hybrid H-mode scenario
Authors:
J Citrin,
S Maeyama,
C Angioni,
N Bonanomi,
C Bourdelle,
F. J Casson,
E Fable,
T Goerler,
P Mantica,
A Mariani,
M Sertoli,
G Staebler,
T Watanabe,
JET Contributors
Abstract:
Previous studies with first-principle-based integrated modelling suggested that ETG turbulence may lead to an anti-GyroBohm isotope scaling in JET high-performance hybrid H-mode scenarios. A dedicated comparison study against higher-fidelity turbulence modelling invalidates this claim. Ion-scale turbulence with magnetic field perturbations included, can match the power balance fluxes within temper…
▽ More
Previous studies with first-principle-based integrated modelling suggested that ETG turbulence may lead to an anti-GyroBohm isotope scaling in JET high-performance hybrid H-mode scenarios. A dedicated comparison study against higher-fidelity turbulence modelling invalidates this claim. Ion-scale turbulence with magnetic field perturbations included, can match the power balance fluxes within temperature gradient error margins. Multiscale gyrokinetic simulations from two distinct codes produce no significant ETG heat flux, demonstrating that simple rules-of-thumb are insufficient criteria for its onset.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
New plasma regimes with small ELMs and high confinement at the Joint European Torus
Authors:
J. Garcia,
E. de la Luna,
M. Sertoli,
F. Casson,
S. Mazzi,
Z. Stancar,
G. Szepesi,
D. Frigione,
L. Garzotti,
F. Rimini,
D. van Eester,
P. Lomas,
C. Sozzi,
R. N. Aiba,
R. Coelho,
L. Frasinetti,
G. Huijsmans,
F. Liu
Abstract:
New plasma regimes with high confinement, low core impurity accumulation and small Edge localized mode (ELMs) perturbations have been obtained close to ITER conditions in magnetically confined plasmas from the Joint European torus (JET) tokamak. Such regimes are achieved by means of optimized particle fuelling conditions which trigger a self-organize state with a strong increase in rotation and io…
▽ More
New plasma regimes with high confinement, low core impurity accumulation and small Edge localized mode (ELMs) perturbations have been obtained close to ITER conditions in magnetically confined plasmas from the Joint European torus (JET) tokamak. Such regimes are achieved by means of optimized particle fuelling conditions which trigger a self-organize state with a strong increase in rotation and ion temperature and a decrease of the edge density. An interplay between core and edge plasma regions leads to reduced turbulence levels and outward impurity convection. These results pave the way to an attractive alternative to the standard plasmas considered for fusion energy generation in a tokamak with metallic wall environment such as the ones expected in ITER
△ Less
Submitted 8 March, 2021; v1 submitted 3 March, 2021;
originally announced March 2021.
-
Flux-driven integrated modelling of main ion pressure and trace tungsten transport in ASDEX Upgrade
Authors:
O. Linder,
J. Citrin,
G. M. D. Hogeweij,
C. Angioni,
C. Bourdelle,
F. J. Casson,
E. Fable,
A. Ho,
F. Koechl,
M. Sertoli,
the EUROfusion MST1 Team,
the ASDEX Upgrade Team
Abstract:
Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to understand and prevent experimental behaviour of W accumulation, flux-driven integrated modelling of main ion heat and particle transport over multiple confinement times is a vital prerequisite. For the first time, the quasili…
▽ More
Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to understand and prevent experimental behaviour of W accumulation, flux-driven integrated modelling of main ion heat and particle transport over multiple confinement times is a vital prerequisite. For the first time, the quasilinear gyrokinetic code QuaLiKiz has been applied for successful predictions of core kinetic profiles in an ASDEX Upgrade H-mode discharge in the turbulence dominated region within the integrated modelling suite JETTO. Neoclassical contributions are calculated by NCLASS; auxiliary heat and particle deposition profiles due to NBI and ECRH prescribed from previous analysis with TRANSP. Turbulent and neoclassical contributions are insufficient in explaining main ion heat and particle transport inside the $q=1$ surface, necessitating the prescription of further transport coefficients to mimic the impact of MHD activity on central transport. The ion to electron temperature ratio at the simulation boundary at $ρ_\mathrm{tor} = 0.85$ stabilizes ion scale modes while destabilizing ETG modes when significantly exceeding unity. Careful analysis of experimental measurements using Gaussian process regression techniques is carried out to explore reasonable uncertainties. In following trace W impurity transport simulations performed with additionally NEO, neoclassical transport under consideration of poloidal asymmetries alone is found to be insufficient to establish hollow central W density profiles. Reproduction of these conditions measured experimentally is found possible only when assuming the direct impact of a saturated $(m,n)=(1,1)$ MHD mode on heavy impurity transport.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
