Showing 1–50 of 57 results for author: Seo, J

Discovering hidden physics using ML-based multimodal super-resolution measurement and its application to fusion plasmas

Authors: Azarakhsh Jalalvand, SangKyeun Kim, Jaemin Seo, Qiming Hu, Max Curie, Peter Steiner, Andrew Oakleigh Nelson, Yong-Su Na, Egemen Kolemen

Abstract: A non-linear complex system governed by multi-spatial and multi-temporal physics scales cannot be fully understood with a single diagnostic, as each provides only a partial view and much information is lost during data extraction. Combining multiple diagnostics also results in imperfect projections of the system's physics. By identifying hidden inter-correlations between diagnostics, we can levera… ▽ More A non-linear complex system governed by multi-spatial and multi-temporal physics scales cannot be fully understood with a single diagnostic, as each provides only a partial view and much information is lost during data extraction. Combining multiple diagnostics also results in imperfect projections of the system's physics. By identifying hidden inter-correlations between diagnostics, we can leverage mutual support to fill in these gaps, but uncovering these inter-correlations analytically is too complex. We introduce a groundbreaking machine learning methodology to address this issue. Our multimodal approach generates super resolution data encompassing multiple physics phenomena, capturing detailed structural evolution and responses to perturbations previously unobservable. This methodology addresses a critical problem in fusion plasmas: the Edge Localized Mode (ELM), a plasma instability that can severely damage reactor walls. One method to stabilize ELM is using resonant magnetic perturbation to trigger magnetic islands. However, low spatial and temporal resolution of measurements limits the analysis of these magnetic islands due to their small size, rapid dynamics, and complex interactions within the plasma. With super-resolution diagnostics, we can experimentally verify theoretical models of magnetic islands for the first time, providing unprecedented insights into their role in ELM stabilization. This advancement aids in develo** effective ELM suppression strategies for future fusion reactors like ITER and has broader applications, potentially revolutionizing diagnostics in fields such as astronomy, astrophysics, and medical imaging. △ Less

Submitted 27 June, 2024; v1 submitted 9 May, 2024; originally announced May 2024.

A New Computational Method for Energetic Particle Acceleration and Transport with its Feedback

Authors: Jeongbhin Seo, Fan Guo, Xiaocan Li, Hui Li

Abstract: We have developed a new computational method to explore astrophysical and heliophysical phenomena, especially those considerably influenced by non-thermal energetic particles. This novel approach considers the backreaction from these energetic particles by incorporating the non-thermal fluid pressure into Magnetohydrodynamics (MHD) equations. The pressure of the non-thermal fluid is evaluated from… ▽ More We have developed a new computational method to explore astrophysical and heliophysical phenomena, especially those considerably influenced by non-thermal energetic particles. This novel approach considers the backreaction from these energetic particles by incorporating the non-thermal fluid pressure into Magnetohydrodynamics (MHD) equations. The pressure of the non-thermal fluid is evaluated from the energetic particle distribution evolved through Parker's transport equation, which is solved using stochastic differential equations. We implement this method in the HOW-MHD code (Seo \& Ryu 2023), which achieves 5th-order accuracy. We find that without spatial diffusion, the method accurately reproduces the Riemann solution in the hydrodynamic shock tube test when including the non-thermal pressure. Solving Parker's transport equation allows the determination of pressure terms for both relativistic and non-relativistic non-thermal fluids with adiabatic indices $γ_{\rm{NT}}=4/3$ and $γ_{\rm{NT}}=5/3$, respectively. The method also successfully replicates the Magnetohydrodynamic shock tube test with non-thermal pressure, successfully resolving the discontinuities within a few cells. Introducing spatial diffusion of non-thermal particles leads to marginal changes in the shock but smooths the contact discontinuity. Importantly, this method successfully simulates the energy spectrum of the non-thermal particles accelerated through shock, which includes feedback from the non-thermal population. These results demonstrate that this method is very powerful for studying particle acceleration when a significant portion of the plasma energy is taken by energetic particles. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: 15 pages, 8 figures

Combined Pre-Supernova Alert System with Kamland and Super-Kamiokande

Authors: KamLAND, Super-Kamiokande Collaborations, :, Seisho Abe, Minori Eizuka, Sawako Futagi, Azusa Gando, Yoshihito Gando, Shun Goto, Takahiko Hachiya, Kazumi Hata, Koichi Ichimura, Sei Ieki, Haruo Ikeda, Kunio Inoue, Koji Ishidoshiro, Yuto Kamei, Nanami Kawada, Yasuhiro Kishimoto, Masayuki Koga, Maho Kurasawa, Tadao Mitsui, Haruhiko Miyake, Daisuke Morita, Takeshi Nakahata , et al. (290 additional authors not shown)

Abstract: Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are ob… ▽ More Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are observed, an early warning of the upcoming core-collapse supernova can be provided. In light of this, KamLAND and Super-Kamiokande, both located in the Kamioka mine in Japan, have been monitoring pre-supernova neutrinos since 2015 and 2021, respectively. Recently, we performed a joint study between KamLAND and Super-Kamiokande on pre-supernova neutrino detection. A pre-supernova alert system combining the KamLAND detector and the Super-Kamiokande detector was developed and put into operation, which can provide a supernova alert to the astrophysics community. Fully leveraging the complementary properties of these two detectors, the combined alert is expected to resolve a pre-supernova neutrino signal from a 15 M$_{\odot}$ star within 510 pc of the Earth, at a significance level corresponding to a false alarm rate of no more than 1 per century. For a Betelgeuse-like model with optimistic parameters, it can provide early warnings up to 12 hours in advance. △ Less

Submitted 1 July, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Comments: Resubmitted to ApJ. 22 pages, 16 figures, for more information about the combined pre-supernova alert system, see https://www.lowbg.org/presnalarm/

Effect of cathode porosity on the Lithium air cell oxygen reduction reaction

Authors: Jeongwook Seo, Shrihari Sankarasubramanian, Nikhilendra Singh, Fuminori Mizuno, Kensuke Takechi, Jai Prakash

Abstract: The kinetics of the oxygen reduction reaction (ORR) on the practical air cathode in a Lithium air cell, which is conventionally composed of porous carbon with or without catalysts supported on it, was investigated. The mechanism and kinetics of the oxygen reduction reaction (ORR) was studied on a porous carbon electrode in an oxygen saturated solution of 0.1M Lithium bis-trifluoromethanesulfonimid… ▽ More The kinetics of the oxygen reduction reaction (ORR) on the practical air cathode in a Lithium air cell, which is conventionally composed of porous carbon with or without catalysts supported on it, was investigated. The mechanism and kinetics of the oxygen reduction reaction (ORR) was studied on a porous carbon electrode in an oxygen saturated solution of 0.1M Lithium bis-trifluoromethanesulfonimidate (LiTFSI) in Dimethoxyethane (DME) using cyclic voltammetery (CV) and the rotating ring-disk electrode (RRDE) technique. The oxygen reduction and evolution reactions were found to occur at similar potentials to those observed on a smooth, planar glassy carbon (GC) electrode. The effect of the porosity and the resultant increase in surface area were readily observed in the increase in the transient time required for the intermediates to reach the ring and the much larger disk currents (compared to smooth, planar GC) recorded respectively. The RRDE data was analyzed using a kinetic model previously developed by us and the rate constant of the elementary reactions calculated. The rates constant for the electrochemical reactions were found to be similar in magnitude to the rate constants calculated for smooth GC disks. The porosity of the electrode was found to decrease the rate of desorption of the intermediate and the product and delay their diffusion by shifting it from a Fickian regime in the electrolyte bulk to the Knudsen regime in the film pores. Thus, it is shown that the effect of the electrode porosity on the kinetics of the ORR is physical rather than electrochemical. △ Less

Submitted 31 March, 2024; originally announced April 2024.

Journal ref: Electrochimica Acta 248, 570-577 (2017)

Second gadolinium loading to Super-Kamiokande

Authors: K. Abe, C. Bronner, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Sato, H. Sekiya, H. Shiba, K. Shimizu, M. Shiozawa , et al. (225 additional authors not shown)

Abstract: The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was do… ▽ More The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was doubled compared to the first loading, the capacity of the powder dissolving system was doubled. We also developed new batches of gadolinium sulfate with even further reduced radioactive impurities. In addition, a more efficient screening method was devised and implemented to evaluate these new batches of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$. Following the second loading, the Gd concentration in SK was measured to be $333.5\pm2.5$ ppm via an Atomic Absorption Spectrometer (AAS). From the mean neutron capture time constant of neutrons from an Am/Be calibration source, the Gd concentration was independently measured to be 332.7 $\pm$ 6.8(sys.) $\pm$ 1.1(stat.) ppm, consistent with the AAS result. Furthermore, during the loading the Gd concentration was monitored continually using the capture time constant of each spallation neutron produced by cosmic-ray muons,and the final neutron capture efficiency was shown to become 1.5 times higher than that of the first loaded phase, as expected. △ Less

Submitted 18 June, 2024; v1 submitted 12 March, 2024; originally announced March 2024.

Comments: 34 pages, 13 figures, submitted to Nuclear Inst. and Methods in Physics Research, A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1065 (2024) 169480

3D audio-visual recordings of mosquito wings for aeroacoustic simulation

Authors: Lionel Feugère, Jung-Hee Seo, Umair Ismail, Gabriella Gibson, Rajat Mittal

Abstract: Mosquito acoustic communication is studied for its singular and poorly-known in-flight hearing mechanism, for its efficiency in mechanical-to-acoustical power transduction, as well as for being the deadliest disease vector. A combined computational and experimental methods to predict and extract the wing-tone sound from individual tethered or free-flying mosquitoes was developed. This paper descri… ▽ More Mosquito acoustic communication is studied for its singular and poorly-known in-flight hearing mechanism, for its efficiency in mechanical-to-acoustical power transduction, as well as for being the deadliest disease vector. A combined computational and experimental methods to predict and extract the wing-tone sound from individual tethered or free-flying mosquitoes was developed. This paper describes the experimental methods and gives some preliminary results of the simulations. Simultaneous slow-motion images (20k fps) and 3D-sound of Culex quinquefasciatus mosquitoes were recorded. The sound map around the mosquitoes was recorded in one or two planes with a rotating array of 12-microphones. Backilluminated mosquito-wings allowed to extract 11 veincrossing locations on each high-speed camera image over 3-4 wingbeat periods to generate 3D deformations of the wing. Simultaneous 3D sound data recorded by microphone arrays were post-processed by using the physicsbased independent component analysis to filter out the noise and generate a 3D sound map. The simulated wingtone sound pattern generated from the aeroacoustic simulation agrees well with the original recording in the experiment using the microphone array. The methods we developed will allow us to investigate the wing-tone soundscape of individual mosquitoes during the courtship and mate-chasing. △ Less

Submitted 4 January, 2024; v1 submitted 25 September, 2023; originally announced January 2024.

Journal ref: Forum Acusticum, Sep 2023, Torino, Italy

Enhancing Disruption Prediction through Bayesian Neural Network in KSTAR

Authors: **su Kim, Jeongwon Lee, Jaemin Seo, Young-Chul Ghim, Yeongsun Lee, Yong-Su Na

Abstract: Disruption in tokamak plasmas, stemming from various instabilities, poses a critical challenge, resulting in detrimental effects on the associated devices. Consequently, the proactive prediction of disruptions to maintain stability emerges as a paramount concern for future fusion reactors. While data-driven methodologies have exhibited notable success in disruption prediction, conventional neural… ▽ More Disruption in tokamak plasmas, stemming from various instabilities, poses a critical challenge, resulting in detrimental effects on the associated devices. Consequently, the proactive prediction of disruptions to maintain stability emerges as a paramount concern for future fusion reactors. While data-driven methodologies have exhibited notable success in disruption prediction, conventional neural networks within a frequentist approach cannot adequately quantify the uncertainty associated with their predictions, leading to overconfidence. To address this limit, we utilize Bayesian deep probabilistic learning to encompass uncertainty and mitigate false alarms, thereby enhancing the precision of disruption prediction. Leveraging 0D plasma parameters from EFIT and diagnostic data, a Temporal Convolutional Network adept at handling multi-time scale data was utilized. The proposed framework demonstrates proficiency in predicting disruptions, substantiating its effectiveness through successful applications to KSTAR experimental data. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Comments: 18 pages, 15 figures, 6 tables

Deep-learning-driven end-to-end metalens imaging

Authors: Joonhyuk Seo, Jaegang Jo, Joohoon Kim, Joonho Kang, Chanik Kang, Seongwon Moon, Eunji Lee, Jehyeong Hong, Junsuk Rho, Haejun Chung

Abstract: Recent advances in metasurface lenses (metalenses) have shown great potential for opening a new era in compact imaging, photography, light detection and ranging (LiDAR), and virtual reality/augmented reality (VR/AR) applications. However, the fundamental trade-off between broadband focusing efficiency and operating bandwidth limits the performance of broadband metalenses, resulting in chromatic ab… ▽ More Recent advances in metasurface lenses (metalenses) have shown great potential for opening a new era in compact imaging, photography, light detection and ranging (LiDAR), and virtual reality/augmented reality (VR/AR) applications. However, the fundamental trade-off between broadband focusing efficiency and operating bandwidth limits the performance of broadband metalenses, resulting in chromatic aberration, angular aberration, and a relatively low efficiency. In this study, a deep-learning-based image restoration framework is proposed to overcome these limitations and realize end-to-end metalens imaging, thereby achieving aberration-free full-color imaging for mass-produced metalenses with 10-mm diameter. Neural-network-assisted metalens imaging achieved a high resolution comparable to that of the ground truth image. △ Less

Submitted 10 May, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

Comments: 17 pages, 7 figures, 1 table

Search for astrophysical electron antineutrinos in Super-Kamiokande with 0.01wt% gadolinium-loaded water

Authors: M. Harada, K. Abe, C. Bronner, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto, K. Sato, H. Sekiya, H. Shiba , et al. (216 additional authors not shown)

Abstract: We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay w… ▽ More We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay with efficient background rejection and higher signal efficiency thanks to the high efficiency of the neutron tagging technique. In this paper, we report the result for the initial stage of SK-Gd with a $22.5\times552$ $\rm kton\cdot day$ exposure at 0.01% Gd mass concentration. No significant excess over the expected background in the observed events is found for the neutrino energies below 31.3 MeV. Thus, the flux upper limits are placed at the 90% confidence level. The limits and sensitivities are already comparable with the previous SK result with pure-water ($22.5 \times 2970 \rm kton\cdot day$) owing to the enhanced neutron tagging. △ Less

Submitted 30 May, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

XPS analysis of molecular contamination and sp2 amorphous carbon on oxidized (100) diamond

Authors: Ricardo Vidrio, Daniel Vincent, Benjamin Bachman, Cesar Saucedo, Maryam Zahedian, Zihong Xu, Junyu Lai, Timothy A. Grotjohn, Shimon Kolkowitz, Jung-Hun Seo, Robert J. Hamers, Keith G. Ray, Zhenqiang Ma, Jennifer T. Choy

Abstract: The efficacy of oxygen (O) surface terminations on diamond is an important factor for the performance and stability for diamond-based quantum sensors and electronics. Given the wide breadth of O-termination techniques, it can be difficult to discern which method would yield the highest and most consistent O coverage. Furthermore, the interpretation of surface characterization techniques is complic… ▽ More The efficacy of oxygen (O) surface terminations on diamond is an important factor for the performance and stability for diamond-based quantum sensors and electronics. Given the wide breadth of O-termination techniques, it can be difficult to discern which method would yield the highest and most consistent O coverage. Furthermore, the interpretation of surface characterization techniques is complicated by surface morphology and purity, which if not accounted for will yield inconsistent determination of the oxygen coverage. We present a comprehensive approach to consistently prepare and analyze oxygen termination of surfaces on (100) single-crystalline diamond. We report on X-ray Photoelectron Spectroscopy (XPS) characterization of diamond surfaces treated with six oxidation methods that include various wet chemical oxidation techniques, photochemical oxidation with UV illumination, and steam oxidation using atomic layer deposition (ALD). Our analysis entails a rigorous XPS peak-fitting procedure for measuring the functionalization of O-terminated diamond. The findings herein have provided molecular-level insights on oxidized surfaces in (100) diamond, including the demonstration of clear correlation between the measured oxygen atomic percentage and the presence of molecular contaminants containing nitrogen, silicon, and sulfur. We also provide a comparison of the sp2 carbon content with the O1s atomic percentage and discern a correlation with the diamond samples treated with dry oxidation which eventually tapers off at a max O1s atomic percentage value of 7.09 +/- 0.40%. Given these results, we conclude that the dry oxidation methods yield some of the highest oxygen amounts, with the ALD water vapor technique proving to be the cleanest technique out of all the oxidation methods explored in this work. △ Less

Submitted 8 May, 2024; v1 submitted 5 April, 2023; originally announced April 2023.

Nonlinear ill-posed problem in low-dose dental cone-beam computed tomography

Authors: Hyoung Suk Park, Chang Min Hyun, ** Keun Seo

Abstract: This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard comput… ▽ More This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard computed tomography. Despite this severe ill-posedness, the demand for dental CBCT systems is rapidly growing because of their cost competitiveness and low radiation dose. We then describe the limitations of existing methods in the accurate restoration of the morphological structures of teeth using dental CBCT data severely damaged by metal implants. We further discuss the usefulness of panoramic images generated from CBCT data for accurate tooth segmentation. We also discuss the possibility of utilizing radiation-free intra-oral scan data as prior information in CBCT image reconstruction to compensate for the damage to data caused by metal implants. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Status and performance of the AMoRE-I experiment on neutrinoless double beta decay

Authors: H. B. Kim, D. H. Ha, E. J. Jeon, J. A. Jeon, H. S. Jo, C. S. Kang, W. G. Kang, H. S. Kim, S. C. Kim, S. G. Kim, S. K. Kim, S. R. Kim, W. T. Kim, Y. D. Kim, Y. H. Kim, D. H. Kwon, E. S. Lee, H. J. Lee, H. S. Lee, J. S. Lee, M. H. Lee, S. W. Lee, Y. C. Lee, D. S. Leonard, H. S. Lim , et al. (10 additional authors not shown)

Abstract: AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst… ▽ More AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules. △ Less

Submitted 5 November, 2022; originally announced November 2022.

Comments: 8 pages, 4 figures, published in Journal of Low Temperature Physics (2022)

Searching for neutrinos from solar flares across solar cycles 23 and 24 with the Super-Kamiokande detector

Authors: K. Okamoto, K. Abe, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, Y. Kaneshima, Y. Kataoka, Y. Kashiwagi, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, Y. Nakano, S. Nakayama, Y. Noguchi, K. Sato, H. Sekiya, K. Shimizu, M. Shiozawa , et al. (220 additional authors not shown)

Abstract: Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we… ▽ More Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we searched for neutrino interactions within narrow time windows coincident with $γ$-rays and soft X-rays recorded by satellites. In addition, we performed the first attempt to search for solar-flare neutrinos from solar flares on the invisible side of the Sun by using the emission time of coronal mass ejections (CMEs). By selecting twenty powerful solar flares above X5.0 on the visible side and eight CMEs whose emission speed exceeds $2000$ $\mathrm{km \, s^{-1}}$ on the invisible side from 1996 to 2018, we found two (six) neutrino events coincident with solar flares occurring on the visible (invisible) side of the Sun, with a typical background rate of $0.10$ ($0.62$) events per flare in the MeV-GeV energy range. No significant solar-flare neutrino signal above the estimated background rate was observed. As a result we set the following upper limit on neutrino fluence at the Earth $\mathitΦ<1.1\times10^{6}$ $\mathrm{cm^{-2}}$ at the $90\%$ confidence level for the largest solar flare. The resulting fluence limits allow us to constrain some of the theoretical models for solar-flare neutrino emission. △ Less

Submitted 26 October, 2022; v1 submitted 24 October, 2022; originally announced October 2022.

Comments: 36 pages, 18 figures, 9 tables (Figure 12 was replaced because it was incorrect in version 1.)

Effect of Antral Motility on Food Hydrolysis and Gastric Emptying from the Stomach: Insights from Computational Models

Authors: Sharun Kuhar, Jae Ho Lee, Jung-Hee Seo, Pankaj J Pasricha, Rajat Mittal

Abstract: The peristaltic motion of the stomach walls combines with the secretion of enzymes to initiate the process that breaks down food. Computational modelling of this phenomenon can help reveal the details that would be hard to capture via in-vivo or in-vitro means. In this study, the digestion of a liquid meal containing protein is simulated in a human-stomach model based on imaging data. Pepsin, the… ▽ More The peristaltic motion of the stomach walls combines with the secretion of enzymes to initiate the process that breaks down food. Computational modelling of this phenomenon can help reveal the details that would be hard to capture via in-vivo or in-vitro means. In this study, the digestion of a liquid meal containing protein is simulated in a human-stomach model based on imaging data. Pepsin, the gastric enzyme for protein hydrolysis, is secreted from the proximal region of the stomach walls and allowed to react with the contents of the stomach. The jet velocities, the emptying rate, and the extent of hydrolysis are quantified for a control case, and also for three other cases of reduced motility with varying peristaltic amplitudes. The findings quantify the effect of motility on the rate of food breakdown and emptying, and correlate the observations with the mixing in the stomach induced by the antral contraction waves. △ Less

Submitted 13 August, 2022; originally announced August 2022.

Comments: 27 pages, 12 Figures

Physics-Based Nozzle Design Rules for High-Frequency Liquid Metal Jetting

Authors: Jongmin Seo, Christoforos Somarakis, Svyatoslav Korneev, Morad Behandish, Adrian J. Lew

Abstract: We present physics-based nozzle design rules to achieve high-throughput and stable jetting in drop-on-demand liquid metal 3D printing. The design rules are based on scaling laws that capture the change of meniscus oscillation relaxation time with geometric characteristics of the nozzle's inner profile. These characteristics include volume, cross-sectional area, and inner surface area of the nozzle… ▽ More We present physics-based nozzle design rules to achieve high-throughput and stable jetting in drop-on-demand liquid metal 3D printing. The design rules are based on scaling laws that capture the change of meniscus oscillation relaxation time with geometric characteristics of the nozzle's inner profile. These characteristics include volume, cross-sectional area, and inner surface area of the nozzle. Using boundary layer theory for a simple geometry, we show that the meniscus settles faster when the ratio of inner surface area to volume is increased. High-fidelity multiphase flow simulations verify this scaling. We use these laws to explore several design concepts with parameterized classes of shapes that reduce the meniscus relaxation time while preserving desired droplet specs. Finally, we show that for various nozzle profile concepts, the optimal performance can be achieved by increasing the ratio of the circumferential surface area to the bulk volume to the extent that is allowable by manufacturing constraints. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Comments: Under Review in Physics of Fluids, AIP Publishing

Pre-Supernova Alert System for Super-Kamiokande

Authors: Super-Kamiokande Collaboration, :, L. N. Machado, K. Abe, Y. Hayato, K. Hiraide, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto, K. Sato, H. Sekiya, H. Shiba , et al. (202 additional authors not shown)

Abstract: In 2020, the Super-Kamiokande (SK) experiment moved to a new stage (SK-Gd) in which gadolinium (Gd) sulfate octahydrate was added to the water in the detector, enhancing the efficiency to detect thermal neutrons and consequently improving the sensitivity to low energy electron anti-neutrinos from inverse beta decay (IBD) interactions. SK-Gd has the potential to provide early alerts of incipient co… ▽ More In 2020, the Super-Kamiokande (SK) experiment moved to a new stage (SK-Gd) in which gadolinium (Gd) sulfate octahydrate was added to the water in the detector, enhancing the efficiency to detect thermal neutrons and consequently improving the sensitivity to low energy electron anti-neutrinos from inverse beta decay (IBD) interactions. SK-Gd has the potential to provide early alerts of incipient core-collapse supernovae through detection of electron anti-neutrinos from thermal and nuclear processes responsible for the cooling of massive stars before the gravitational collapse of their cores. These pre-supernova neutrinos emitted during the silicon burning phase can exceed the energy threshold for IBD reactions. We present the sensitivity of SK-Gd to pre-supernova stars and the techniques used for the development of a pre-supernova alarm based on the detection of these neutrinos in SK, as well as prospects for future SK-Gd phases with higher concentrations of Gd. For the current SK-Gd phase, high-confidence alerts for Betelgeuse could be issued up to nine hours in advance of the core-collapse itself. △ Less

Submitted 17 August, 2022; v1 submitted 19 May, 2022; originally announced May 2022.

Comments: 20 pages

Journal ref: The Astrophysical Journal, Volume 935, Number 1 (2022)

Transient Characteristics of $β$-Ga$_2$O$_3$ Nanomembrane Schottky Barrier Diodes on Various Substrates

Authors: Junyu Lai, Jung-Hun Seo

Abstract: In this paper, a transient delayed rising and fall time of $β$-Ga$_2$O$_3$ NMs Schottky barrier diodes (SBDs) formed on four different substrates (diamond, Si, sapphire, and polyimide) were measured using a sub-micron second resolution time-resolved electrical measurement system under a different temperature condition. The devices exhibited noticeably less-delayed turn-on-/off- the transient time… ▽ More In this paper, a transient delayed rising and fall time of $β$-Ga$_2$O$_3$ NMs Schottky barrier diodes (SBDs) formed on four different substrates (diamond, Si, sapphire, and polyimide) were measured using a sub-micron second resolution time-resolved electrical measurement system under a different temperature condition. The devices exhibited noticeably less-delayed turn-on-/off- the transient time when $β$-Ga$_2$O$_3$ NMs SBDs were transfer-printed on a high-k substrate. Furthermore, a relationship between the $β$-Ga$_2$O$_3$ NM thicknesses and their transient characteristics were systematically investigated and found that phonon scattering plays an important role in heat dissipation as the thickness of $β$-Ga$_2$O$_3$ NMs get thinner which is also verified by the Multiphysics simulator. Overall, our result reveals the impact of various substrates with different thermal properties and different \b{eta}- Ga2O3 NMs thickness with the performance of $β$-Ga$_2$O$_3$ NMs based devices. Hence, these results can guide further efforts us to optimize the performance of future $β$-Ga$_2$O$_3$ devices by maximizing heat dissipation from the $β$-Ga$_2$O$_3$ layer. △ Less

Submitted 22 February, 2022; originally announced February 2022.

Computational model of drug dissolution in the stomach: effects of posture and gastroparesis on drug bioavailability

Authors: Jae H. Lee, Sharun Kuhar, Jung-Hee Seo, Pankaj J. Pasricha, Rajat Mittal

Abstract: The oral route is the most common choice for drug administration because of convenience, low cost, and high patient compliance, but is also a complex route. The rate of dissolution and gastric emptying of the dissolved active pharmaceutical ingredient (API) into the duodenum is modulated by factors such as gastric motility, but current in-vitro procedures for assessing drug dissolution are limited… ▽ More The oral route is the most common choice for drug administration because of convenience, low cost, and high patient compliance, but is also a complex route. The rate of dissolution and gastric emptying of the dissolved active pharmaceutical ingredient (API) into the duodenum is modulated by factors such as gastric motility, but current in-vitro procedures for assessing drug dissolution are limited in their ability to recapitulate this process. This is particularly relevant for disease conditions, such as gastroparesis, that alter the anatomy and/or physiology of the stomach. In this study we employ a biomimetic in-silico simulator based on the realistic anatomy and morphology of the stomach, to investigate the effect of body posture and stomach motility on drug bioavailability. The simulations show that changes in posture can have a significant (up to 83%) effect on the emptying rate of the API into the duodenum. Similarly, reduction in antral contractility associated with gastroparesis can also significantly reduce the dissolution of the pill as well as emptying of the API into the duodenum. The simulations show that for an equivalent motility index, reduction in gastric emptying due to neuropathic gastroparesis is larger by a factor of about five compared to myopathic gastroparesis. △ Less

Submitted 21 January, 2022; originally announced January 2022.

Comments: 32 pages, 8 figures, supplemental material

A feasibility study of extruded plastic scintillator embedding WLS fiber for AMoRE-II muon veto

Authors: J. W. Seo, W. T. Kim, Y. D. Kim, H. Y. Lee, J. Lee, M. H. Lee, P. B. Nyanda, E. S. Yi

Abstract: AMoRE-II is the second phase of the Advanced Molybdenum-based Rare process Experiment aiming to search for the neutrino-less double beta decay of 100Mo isotopes using ~ 200 kg of molybdenum-containing cryogenic detectors. The AMoRE-II needs to keep the background level below 10-5 counts/keV/kg/year with various methods to maximize the sensitivity. One of the methods is to have the experiment be ca… ▽ More AMoRE-II is the second phase of the Advanced Molybdenum-based Rare process Experiment aiming to search for the neutrino-less double beta decay of 100Mo isotopes using ~ 200 kg of molybdenum-containing cryogenic detectors. The AMoRE-II needs to keep the background level below 10-5 counts/keV/kg/year with various methods to maximize the sensitivity. One of the methods is to have the experiment be carried out deep underground free from the cosmic ray backgrounds. The AMoRE-II will run at Yemilab with ~ 1,000 m depth. However, even in such a deep underground environment, there are still survived cosmic muons, which can affect the measurement and should be excluded as much as possible. A muon veto detector is necessary to reject muon-induced particles coming to the inner detector where the molybdate cryogenic detectors are located. We have studied the possibility of using an extruded plastic scintillator and wavelength shifting fiber together with SiPM as a muon veto system. We found that the best configuration is two layers of plastic scintillators (PSs, 150 cm x 25 cm x 1.2 cm) with two WLS fibers per groove, which could separate radiogenic gammas well with muon detection efficiency above 99.4% along the length of the PS. Based on the expected flux from a prototype measurement at a 700 m deep underground, we found that the dead time of the muon veto system for AMoRE-II at the Yemilab with a 1 ms veto window is 0.6% of whole muon events. △ Less

Submitted 11 July, 2022; v1 submitted 20 January, 2022; originally announced January 2022.

Comments: 9 pages, 7 figures, 2 tables, accepted for publication at NIMA

Investigation of the Imperfect Interface at the Si/GaAs Heterojunction Formed by Ultra-Thin Oxide Interfacial Layer

Authors: Md Nazmul Hasan, Yixiong Zheng, Junyu Lai, Edward Swinnich, Olivia Grace Licata, Mohadeseh A. Baboli, Baishakhi Mazumder, Parsian K. Mohseni, Jung-Hun Seo

Abstract: The structure property of non-ideal Si/GaAs heterostructures that were integrated with the ultra-thin oxide (UO) tunneling interfacial layer has been systematically investigated. Si nanomembranes (NMs) were oxidized in different time periods prior to the hetero-integration process to create the non-ideal single-side passivated Si/GaAs heterostructure. The atomic level oxygen distribution and the d… ▽ More The structure property of non-ideal Si/GaAs heterostructures that were integrated with the ultra-thin oxide (UO) tunneling interfacial layer has been systematically investigated. Si nanomembranes (NMs) were oxidized in different time periods prior to the hetero-integration process to create the non-ideal single-side passivated Si/GaAs heterostructure. The atomic level oxygen distribution and the degree of oxygen content in Si NM and GaAs were carefully investigated using the atom probe tomography (APT) and X-ray photoelectron spectroscopy (XPS) to trace the changes in chemical composition and reactional mechanism across the UO interface when the surface of Si NM was exposed to air for different period of time. The negatively induced charges at the UO layer caused the oxygen diffusion to GaAs layer and formed the unwanted GaAs oxide layer. This native oxide stack noticeably degraded the thermal properties of the Si/GaAs heterostructure as Si NMs were more oxidized. This study revealed that the poor surface passivation on the one side of the heterointerface leads to a both-side oxidation, thus severely deteriorating the transport properties across the heterojunction that is formed with the UO layer. △ Less

Submitted 24 October, 2021; originally announced October 2021.

Comments: arXiv admin note: substantial text overlap with arXiv:2107.06983

Systematic comparison between the generalized Lorenz equations and DNS in the two-dimensional Rayleigh-Bénard convection

Authors: Junho Park, Sungju Moon, Jaemyeong Mango Seo, Jong-** Baik

Abstract: The classic Lorenz equations were originally derived from the two-dimensional Rayleigh-Bénard convection system considering an idealised case with the lowest order of harmonics. Although the low-order Lorenz equations have traditionally served as a minimal model for chaotic and intermittent atmospheric motions, even the dynamics of the two-dimensional Rayleigh-Bénard convection system is not fully… ▽ More The classic Lorenz equations were originally derived from the two-dimensional Rayleigh-Bénard convection system considering an idealised case with the lowest order of harmonics. Although the low-order Lorenz equations have traditionally served as a minimal model for chaotic and intermittent atmospheric motions, even the dynamics of the two-dimensional Rayleigh-Bénard convection system is not fully represented by the Lorenz equations, and such differences have yet to be clearly identified in a systematic manner. In this paper, the convection problem is revisited through an investigation of various dynamical behaviors exhibited by a two-dimensional direct numerical simulation (DNS) and the generalized expansion of the Lorenz equations (GELE) derived by considering additional higher-order harmonics in the spectral expansions of periodic solutions. Notably, the GELE allows us to understand how nonlinear interactions among high-order modes alter the dynamical features of the Lorenz equations including fixed points, chaotic attractors, and periodic solutions. It is verified that numerical solutions of the DNS can be recovered from the solutions of GELE when we consider the system with sufficiently high-order harmonics. At the lowest order, the classic Lorenz equations are recovered from GELE. Unlike in the Lorenz equations, we observe limit tori, which are the multi-dimensional analogue of limit cycles, in the solutions of the DNS and GELE at high orders. Initial condition dependency in the DNS and Lorenz equations is also discussed. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Comments: Published in Chaos

First Gadolinium Loading to Super-Kamiokande

Authors: K. Abe, C. Bronner, Y. Hayato, K. Hiraide, M. Ikeda, S. Imaizumi, J. Kameda, Y. Kanemura, Y. Kataoka, S. Miki, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, S. Nakayama, T. Okada, K. Okamoto, A. Orii, G. Pronost, H. Sekiya, M. Shiozawa, Y. Sonoda, Y. Suzuki, A. Takeda, Y. Takemoto , et al. (192 additional authors not shown)

Abstract: In order to improve Super-Kamiokande's neutron detection efficiency and to thereby increase its sensitivity to the diffuse supernova neutrino background flux, 13 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ (gadolinium sulfate octahydrate) was dissolved into the detector's otherwise ultrapure water from July 14 to August 17, 2020, marking the start of the SK-Gd phase of operations. During the loa… ▽ More In order to improve Super-Kamiokande's neutron detection efficiency and to thereby increase its sensitivity to the diffuse supernova neutrino background flux, 13 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ (gadolinium sulfate octahydrate) was dissolved into the detector's otherwise ultrapure water from July 14 to August 17, 2020, marking the start of the SK-Gd phase of operations. During the loading, water was continuously recirculated at a rate of 60 m$^3$/h, extracting water from the top of the detector and mixing it with concentrated $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ solution to create a 0.02% solution of the Gd compound before injecting it into the bottom of the detector. A clear boundary between the Gd-loaded and pure water was maintained through the loading, enabling monitoring of the loading itself and the spatial uniformity of the Gd concentration over the 35 days it took to reach the top of the detector. During the subsequent commissioning the recirculation rate was increased to 120 m$^3$/h, resulting in a constant and uniform distribution of Gd throughout the detector and water transparency equivalent to that of previous pure-water operation periods. Using an Am-Be neutron calibration source the mean neutron capture time was measured to be $115\pm1$ $μ$s, which corresponds to a Gd concentration of $111\pm2$ ppm, as expected for this level of Gd loading. This paper describes changes made to the water circulation system for this detector upgrade, the Gd loading procedure, detector commissioning, and the first neutron calibration measurements in SK-Gd. △ Less

Submitted 15 December, 2021; v1 submitted 1 September, 2021; originally announced September 2021.

Comments: 37 pages, 19 Figures, Accepted for publication in Nucl. Instrum. Meth. A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1027 (2022) 166248

Alpha backgrounds in the AMoRE-Pilot experiment

Authors: V. Alenkov, H. W. Bae, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun, S. H. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. Gezhaev, V. D. Grigoryeva, V. Gurentsov, D. H. Ha, C. Ha, E. J. Ha, I. Hahn, E. J. Jeon , et al. (81 additional authors not shown)

Abstract: The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit… ▽ More The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model. △ Less

Submitted 5 December, 2022; v1 submitted 16 July, 2021; originally announced July 2021.

Electrical and Thermal Property of Si/GaAs Heterojunction Formed by Ultra-Thin Oxide Interfacial Layer

Authors: Md Nazmul Hasan, Yixiong Zheng, Junyu Lai, Edward Swinnich, Olivia Grace Licata, Mohadeseh A. Baboli, Baishakhi Mazumder, Parsian K. Mohseni, Jung-Hun Seo

Abstract: We have successfully demonstrated Si/GaAs p-n heterostructures using Al2O3 ultra-thin oxide interfacial layers. The band diagram and band offsets were investigated using X-ray photoelectron spectroscopy and confirm a small discontinuity in the conduction band (0.03 eV) at the interface. The interface defect density (Dit) values of the heterointerface with different ultra-thin oxide (UO) thicknesse… ▽ More We have successfully demonstrated Si/GaAs p-n heterostructures using Al2O3 ultra-thin oxide interfacial layers. The band diagram and band offsets were investigated using X-ray photoelectron spectroscopy and confirm a small discontinuity in the conduction band (0.03 eV) at the interface. The interface defect density (Dit) values of the heterointerface with different ultra-thin oxide (UO) thicknesses ranged from 0.35 nm to 3.5 nm and were also characterized based on a metal-oxide-semiconductor capacitor (MOSCAP) structure using a capacitance-voltage measurement. The results revealed that a thin UO interfacial layer (around 1 nm) maximizes carrier transport property due to better surface passivation and efficient tunneling properties. Thermal property investigation also shows that the Al2O3 UO interfacial layer offers a good tunneling layer but also facilitates phonon transport across the interface. Finally, the electrical characterization of Si/GaAs heterojunction p-n diodes confirms reliable rectifying behavior with an extremely low ideality factor; thus, heterogeneous integration using the UO approach offers a robust way to create more types of heterojunctions between dissimilar semiconductors. △ Less

Submitted 24 October, 2021; v1 submitted 14 July, 2021; originally announced July 2021.

Comments: This manuscript has been revised with a slightly different title and focuses

Theoretical Prediction of Heterogeneous Integration of Dissimilar Semiconductor with Various Ultra-Thin Oxides and 2D Materials

Authors: Md Nazmul Hasan, Chenxi Li, Junyu Lai, Jung-Hun Seo

Abstract: In this paper, we have built a numerical p-n Si/GaAs heterojunction model using a quantum-mechanical tunneling theory with various quantum tunneling interfacial materials including two-dimensional semiconductors such as hexagonal boron nitride (h-BN) and graphene and ALD-enabled oxide materials such as HfO2, Al2O3, and SiO2. Their tunneling efficiencies and tunneling current with different thickne… ▽ More In this paper, we have built a numerical p-n Si/GaAs heterojunction model using a quantum-mechanical tunneling theory with various quantum tunneling interfacial materials including two-dimensional semiconductors such as hexagonal boron nitride (h-BN) and graphene and ALD-enabled oxide materials such as HfO2, Al2O3, and SiO2. Their tunneling efficiencies and tunneling current with different thicknesses were systematically calculated and compared. Multiphysics modeling was used with the aforementioned tunneling interfacial materials to analyze changes in strain under different temperature conditions. Considering the transport properties and thermal-induced strain analysis, Al2O3 among three oxide materials and graphene in 2D materials are favorable material choices that offer the highest heterojunction quality. Overall, our results offer the viable route to guide the selection of quantum tunneling materials for myriad possible combinations of new heterostructures that can be obtained via remote epitaxy and the UO method. △ Less

Submitted 4 July, 2021; originally announced July 2021.

First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors

Authors: ALICE ITS project, :, G. Aglieri Rinella, M. Agnello, B. Alessandro, F. Agnese, R. S. Akram, J. Alme, E. Anderssen, D. Andreou, F. Antinori, N. Apadula, P. Atkinson, R. Baccomi, A. Badalà, A. Balbino, C. Bartels, R. Barthel, F. Baruffaldi, I. Belikov, S. Beole, P. Becht, A. Bhatti, M. Bhopal, N. Bianchi , et al. (230 additional authors not shown)

Abstract: A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to ra… ▽ More A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance. In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties. △ Less

Submitted 17 August, 2021; v1 submitted 27 May, 2021; originally announced May 2021.

An efficient direct band-gap transition in germanium by three-dimensional strain

Authors: Simon Mellaerts, Valeri Afanasiev, ** Won Seo, Michel Houssa, Jean-Pierre Locquet

Abstract: Complementary to the development of highly three-dimensional (3D) integrated circuits in the continuation of Moore's law, there has been a growing interest in new 3D deformation strategies to improve device performance. To continue this search for new 3D deformation techniques, it is essential to explore beforehand - using computational predictive methods - which strain tensor leads to the desired… ▽ More Complementary to the development of highly three-dimensional (3D) integrated circuits in the continuation of Moore's law, there has been a growing interest in new 3D deformation strategies to improve device performance. To continue this search for new 3D deformation techniques, it is essential to explore beforehand - using computational predictive methods - which strain tensor leads to the desired properties. In this work, we study germanium (Ge) under an isotropic 3D strain on the basis of first-principle methods. The transport and optical properties are studied by a fully ab initio Boltzmann transport equation and many-body Bethe-Salpeter equation (BSE) approach, respectively. Our findings show that a direct band gap in Ge could be realized with only 0.34% triaxial tensile strain (negative pressure) and without the challenges associated with Sn do**. At the same time a significant increase in refractive index and carrier mobility - particularly for electrons - is observed. These results demonstrate that there is a huge potential in exploring the 3D deformation space for semiconductors - and potentially many other materials - in order to optimize their properties. △ Less

Submitted 8 June, 2021; v1 submitted 24 February, 2021; originally announced February 2021.

Comments: Accepted at ACS Applied Materials & Interfaces

Journal ref: ACS Appl. Mater. Interfaces 2021, 13, 26, 30941-30949

Large-Size Free-Standing Single-crystal b-Ga2O3 Membranes Fabricated by Hydrogen Implantation and Lift-Off

Authors: Yixiong Zheng, Zixuan Feng, A F M Anhar Uddin Bhuiyan, Lingyu Meng, Samyak Dhole, Quanxi Jia, Hong** Zhao, Jung-Hun Seo

Abstract: In this paper, we have demonstrated the large-size free-standing single-crystal b-Ga2O3 NMs fabricated by the hydrogen implantation and lift-off process directly from MOCVD grown b-Ga2O3 epifilms on native substrates. The optimum implantation conditions were simulated with a Monte-Carlo simulation to obtain the high hydrogen concentration with a narrow ion distribution at the desired depth. Two as… ▽ More In this paper, we have demonstrated the large-size free-standing single-crystal b-Ga2O3 NMs fabricated by the hydrogen implantation and lift-off process directly from MOCVD grown b-Ga2O3 epifilms on native substrates. The optimum implantation conditions were simulated with a Monte-Carlo simulation to obtain the high hydrogen concentration with a narrow ion distribution at the desired depth. Two as grown b-Ga2O3 samples with different orientation ([100] and [001]) were used and successfully create 1.2 um thick b-Ga2O3 NMs without any physical damages. These b-Ga2O3 NMs were then transfer-printed onto rigid and flexible substrates such as SiC substrate and polyimide substrate. Various material characterizations were performed to investigate the crystal quality, surface morphology, optical property, mechanical property, and bandgap before and after the lift-off and revealed that good material quality is maintained. This result offers several benefits in that the thickness, do**, and size of b-Ga2O3 NMs can be fully controlled. Moreover, more advanced b-Ga2O3-based NM structures such as (AlxGa1-x)2O3/Ga2O3 heterostructure NMs can be directly created from their bulk epitaxy substrates thus this result provides a viable route for the realization of high performance b-Ga2O3 NM-based electronics and optoelectronics that can be built on various substrates and platforms. △ Less

Submitted 11 February, 2021; originally announced February 2021.

Supernova Model Discrimination with Hyper-Kamiokande

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, I. Anghel, L. H. V. Anthony, M. Antonova, A. Araya, Y. Asaoka, Y. Ashida, V. Aushev, F. Ballester, I. Bandac, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, M. Bergevin , et al. (478 additional authors not shown)

Abstract: Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla… ▽ More Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature. △ Less

Submitted 20 July, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 21 pages, 7 figures. Article based on thesis published as arXiv:2002.01649. v2: added references and some explanations in response to reviewer comments

Journal ref: Astrophys.J. 916 (2021) 15

The Hyper-Kamiokande Experiment -- Snowmass LOI

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, L. H. V. Anthony, A. Araya, Y. Asaoka, V. Aushev, I. Bandac, M. Barbi, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, L. Bernard, E. Bernardini, L. Berns, S. Bhadra, J. Bian, A. Blanchet , et al. (366 additional authors not shown)

Abstract: Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc… ▽ More Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: 6 pages, prepared as Snowmass2021 LOI

The JSNS$^{2}$ data acquisition system

Authors: J. S. Park, S. Ajimura, M. Botran, M. K. Cheoun, J. H. Choi, T. Dodo, H. Furuta, P. Gwak, M. Harada, S. Hasegawa, Y. Hino, T. Hiraiwa, H. I. Jang, J. S. Jang, M. Jang, H. Jeon, S. Jeon, K. K. Joo, J. R. Jordan, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim , et al. (36 additional authors not shown)

Abstract: The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24 m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium(Gd)-loaded liquid scintillator (LS) with an additional 31 tons of unloaded LS in the intermediate $γ$-catcher and an optically separated outer veto volumes. A… ▽ More The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24 m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium(Gd)-loaded liquid scintillator (LS) with an additional 31 tons of unloaded LS in the intermediate $γ$-catcher and an optically separated outer veto volumes. A total of 120 10-inch photomultiplier tubes observe the scintillating optical photons and each analog waveform is stored with the flash analog-to-digital converters. We present details of the data acquisition, processing, and data quality monitoring system. We also present two different trigger logics which are developed for the beam and self-trigger. △ Less

Submitted 31 May, 2020; originally announced June 2020.

Comments: 11 pages, 8 figures

Performance of PMTs for the JSNS2 experiment

Authors: J. S. Park, H. Furuta, T. Maruyama, S. Monjushiro, K. Nishikawa, M. Taira, J. S. Jang, K. K. Joo, J. Y. Kim, I. T. Lim, D. H. Moon, J. H. Seo, C. D. Shin, A. Zohaib, P. Gwak, M. Jang, S. Ajimura, T. Hiraiwa, T. Nakano, M. Nomachi, T. Shima, Y. Sugaya, M. K. Cheoun, J. H. Choi, M. Y. Pac , et al. (36 additional authors not shown)

Abstract: The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24\,m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium-loaded liquid scintillator (LS) and both the intermediate $γ$-catcher and the optically separated outer veto are filled with un-loaded LS. Optical photons fro… ▽ More The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24\,m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium-loaded liquid scintillator (LS) and both the intermediate $γ$-catcher and the optically separated outer veto are filled with un-loaded LS. Optical photons from scintillation are observed by 120 Photomultiplier Tubes (PMTs). A total of 130 PMTs for the JSNS2 experiment were both donated by other experiments and purchased from Hamamatsu. Donated PMTs were purchased around 10 years ago, therefore JSNS$^{2}$ did pre-calibration of the PMTs including the purchased PMTs. 123 PMTs demonstrated acceptable performance for the JSNS$^{2}$ experiment, and 120 PMTs were installed in the detector. △ Less

Submitted 25 May, 2020; v1 submitted 4 May, 2020; originally announced May 2020.

The Flow Physics of COVID-19

Authors: Rajat Mittal, Rui Ni, Jung-Hee Seo

Abstract: Flow physics plays a key role in nearly every facet of the COVID-19 pandemic. This includes the generation and aerosolization of virus-laden respiratory droplets from a host, its airborne dispersion and deposition on surfaces, as well as the subsequent inhalation of these bioaerosols by unsuspecting recipients. Fluid dynamics is also key to preventative measures such as the use of face masks, hand… ▽ More Flow physics plays a key role in nearly every facet of the COVID-19 pandemic. This includes the generation and aerosolization of virus-laden respiratory droplets from a host, its airborne dispersion and deposition on surfaces, as well as the subsequent inhalation of these bioaerosols by unsuspecting recipients. Fluid dynamics is also key to preventative measures such as the use of face masks, hand-washing, ventilation of indoor environments, and even social distancing. This article summarizes what we know, and more importantly, what we need to learn about the science underlying these issues so that we are better prepared to tackle the next outbreak of COVID-19 or a similar disease. △ Less

Submitted 22 April, 2020; v1 submitted 20 April, 2020; originally announced April 2020.

Tailoring the Spectral Absorption Coefficient of a Blended Plasmonic Nanofluid Using a Customized Genetic Algorithm

Authors: Junyong Seo, Caiyan Qin, Jungchul Lee, Bong Jae Lee

Abstract: Recently, plasmonic nanofluids (i.e., a suspension of plasmonic nanoparticles in a base fluid) have been widely employed in direct-absorption solar collectors because the localized surface plasmon supported by plasmonic nanoparticles can greatly improve the direct solar thermal conversion performance. Considering that the surface plasmon resonance frequency of metallic nanoparticles, such as gold,… ▽ More Recently, plasmonic nanofluids (i.e., a suspension of plasmonic nanoparticles in a base fluid) have been widely employed in direct-absorption solar collectors because the localized surface plasmon supported by plasmonic nanoparticles can greatly improve the direct solar thermal conversion performance. Considering that the surface plasmon resonance frequency of metallic nanoparticles, such as gold, silver, and aluminum, is usually located in the ultraviolet to visible range, the absorption coefficient of a plasmonic nanofluid must be spectrally tuned for full utilization of the solar radiation in a broad spectrum. In the present study, a modern design process in the form of a genetic algorithm (GA) is applied to the tailoring of the spectral absorption coefficient of a plasmonic nanofluid. To do this, the major components of a conventional GA, such as the gene description, fitness function for the evaluation, crossover, and mutation function, are modified to be suitable for the inverse problem of tailoring the spectral absorption coefficient of a plasmonic nanofluid. By applying the customized GA, we obtained an optimal combination for a blended nanofluid with the desired spectral distribution of the absorption coefficient, specifically a uniform distribution, solar-spectrum-like distribution, and a step-function-like distribution. The resulting absorption coefficient of the designed plasmonic nanofluid is in good agreement with the prescribed spectral distribution within about 10\% to 20\% of error when six types of nanoparticles are blended. Finally, we also investigate how the inhomogeneous broadening effect caused by the fabrication uncertainty of the nanoparticles changes their optimal combination. △ Less

Submitted 19 February, 2020; originally announced February 2020.

Comments: 4 figures

Journal ref: Sci. Rep. 10, 8891 (2020)

Multi-fidelity estimators for coronary circulation models under clinically-informed data uncertainty

Authors: Jongmin Seo, Casey Fleeter, Andrew M. Kahn, Alison L. Marsden, Daniele E. Schiavazzi

Abstract: Numerical models are increasingly used for non-invasive diagnosis and treatment planning in coronary artery disease, where service-based technologies have proven successful in identifying hemodynamically significant and hence potentially dangerous vascular anomalies. Despite recent progress towards clinical adoption, many results in the field are still based on a deterministic characterization of… ▽ More Numerical models are increasingly used for non-invasive diagnosis and treatment planning in coronary artery disease, where service-based technologies have proven successful in identifying hemodynamically significant and hence potentially dangerous vascular anomalies. Despite recent progress towards clinical adoption, many results in the field are still based on a deterministic characterization of blood flow, with no quantitative assessment of the variability of simulation outputs due to uncertainty from multiple sources. In this study, we focus on parameters that are essential to construct accurate patient-specific representations of the coronary circulation, such as aortic pressure waveform, intramyocardial pressure and quantify how their uncertainty affects clinically relevant model outputs. We construct a deformable model of the left coronary artery subject to a prescribed inlet pressure and with open-loop outlet boundary conditions, treating fluid-structure interaction through an Arbitrary-Lagrangian-Eulerian frame of reference. Random input uncertainty is estimated directly from repeated clinical measurements from intra-coronary catheterization and complemented by literature data. We also achieve significant computational cost reductions in uncertainty propagation thanks to multifidelity Monte Carlo estimators of the outputs of interest, leveraging the ability to generate, at practically no cost, one- and zero-dimensional low-fidelity representations of left coronary artery flow, with appropriate boundary conditions. The results demonstrate how the use of multi-fidelity control variate estimators leads to significant reductions in variance and accuracy improvements with respect to traditional Monte-Carlo. △ Less

Submitted 29 April, 2020; v1 submitted 25 November, 2019; originally announced November 2019.

Observation of Reactor Antineutrino Disappearance Using Delayed Neutron Capture on Hydrogen at RENO

Authors: C. D. Shin, Zohaib Atif, G. Bak, J. H. Choi, H. I. Jang, J. S. Jang, S. H. Jeon, K. K. Joo, K. Ju, D. E. Jung, J. G. Kim, J. Y. Kim, S. B. Kim, S. Y. Kim, W. Kim, E. Kwon, D. H. Lee, H. G. Lee, Y. C. Lee, I. T. Lim, D. H. Moon, M. Y. Pac, C. Rott, H. Seo, J. H. Seo , et al. (6 additional authors not shown)

Abstract: The Reactor Experiment for Neutrino Oscillation (RENO) experiment has been taking data using two identical liquid scintillator detectors of 44.5 tons since August 2011. The experiment has observed the disappearance of reactor neutrinos in their interactions with free protons, followed by neutron capture on hydrogen. Based on 1500 live days of data taken with 16.8 GW$_{th}$ reactors at the Hanbit N… ▽ More The Reactor Experiment for Neutrino Oscillation (RENO) experiment has been taking data using two identical liquid scintillator detectors of 44.5 tons since August 2011. The experiment has observed the disappearance of reactor neutrinos in their interactions with free protons, followed by neutron capture on hydrogen. Based on 1500 live days of data taken with 16.8 GW$_{th}$ reactors at the Hanbit Nuclear Power Plant in Korea, the near (far) detector observes 567690 (90747) electron antineutrino candidate events with a delayed neutron capture on hydrogen. This provides an independent measurement of $θ_{13}$ and a consistency check on the validity of the result from n-Gd data. Furthermore, it provides an important cross-check on the systematic uncertainties of the n-Gd measurement. Based on a rate-only analysis, we obtain sin$^{2}$2$θ_{13}$= 0.087 $\pm$ 0.008 (stat.) $\pm$ 0.014 (syst.). △ Less

Submitted 11 November, 2019; originally announced November 2019.

Comments: 26 pages, 19 figures, 6 tables

The effects of clinically-derived parametric data uncertainty in patient-specific coronary simulations with deformable walls

Authors: Jongmin Seo, Daniele E. Schiavazzi, Andrew M. Kahn, Alison L. Marsden

Abstract: Cardiovascular simulations are increasingly used for non-invasive diagnosis of cardiovascular disease, to guide treatment decisions, and in the design of medical devices. Quantitative assessment of the variability of simulation outputs due to input uncertainty is a key step toward further integration of cardiovascular simulations in the clinical workflow. In this study, we present uncertainty quan… ▽ More Cardiovascular simulations are increasingly used for non-invasive diagnosis of cardiovascular disease, to guide treatment decisions, and in the design of medical devices. Quantitative assessment of the variability of simulation outputs due to input uncertainty is a key step toward further integration of cardiovascular simulations in the clinical workflow. In this study, we present uncertainty quantification in computational models of the coronary circulation to investigate the effect of uncertain parameters, including coronary pressure waveform, intramyocardial pressure, morphometry exponent, and the vascular wall Young's modulus. We employ a left coronary artery model with deformable vessel walls, simulated via an ALE framework for FSI, with a prescribed inlet pressure and open-loop lumped parameter network outlet boundary conditions. Stochastic modeling of the uncertain inputs is determined from intra-coronary catheterization data or gathered from the literature. Uncertainty propagation is performed using several approaches including Monte Carlo, Quasi MC, stochastic collocation, and multiwavelet stochastic expansion. Variabilities in QoI, including branch pressure, flow, wall shear stress, and wall deformation are assessed. We find that uncertainty in inlet pressures and intramyocardial pressures significantly affect all resulting QoIs, while uncertainty in elastic modulus only affects the mechanical response of the vascular wall. Variability in the morphometry exponent has little effect on coronary hemodynamics or wall mechanics. Finally, we compare convergence behaviors of statistics of QoIs using several uncertainty propagation methods. From the simulation results, we conclude that the multi-wavelet stochastic expansion shows superior accuracy and performance against Quasi Monte Carlo and stochastic collocation methods. △ Less

Submitted 20 February, 2020; v1 submitted 20 August, 2019; originally announced August 2019.

Automatic detection and segmentation of lumbar vertebra from X-ray images for compression fracture evaluation

Authors: Kang Cheol Kim, Hyun Cheol Cho, Tae Jun Jang, Jong Mun Choi, ** Keun Seo

Abstract: For compression fracture detection and evaluation, an automatic X-ray image segmentation technique that combines deep-learning and level-set methods is proposed. Automatic segmentation is much more difficult for X-ray images than for CT or MRI images because they contain overlap** shadows of thoracoabdominal structures including lungs, bowel gases, and other bony structures such as ribs. Additio… ▽ More For compression fracture detection and evaluation, an automatic X-ray image segmentation technique that combines deep-learning and level-set methods is proposed. Automatic segmentation is much more difficult for X-ray images than for CT or MRI images because they contain overlap** shadows of thoracoabdominal structures including lungs, bowel gases, and other bony structures such as ribs. Additional difficulties include unclear object boundaries, the complex shape of the vertebra, inter-patient variability, and variations in image contrast. Accordingly, a structured hierarchical segmentation method is presented that combines the advantages of two deep-learning methods. Pose-driven learning is used to selectively identify the five lumbar vertebra in an accurate and robust manner. With knowledge of the vertebral positions, M-net is employed to segment the individual vertebra. Finally, fine-tuning segmentation is applied by combining the level-set method with the previously obtained segmentation results. The performance of the proposed method was validated using clinical data, resulting in center position detection error of $25.35\pm10.86$ and a mean Dice similarity metric of $91.60\pm2.22\%$. △ Less

Submitted 16 April, 2019; originally announced April 2019.

Performance of preconditioned iterative linear solvers for cardiovascular simulations in rigid and deformable vessels

Authors: Jongmin Seo, Daniele E. Schiavazzi, Alison L. Marsden

Abstract: Computing the solution of linear systems of equations is invariably the most time consuming task in the numerical solutions of PDEs in many fields of computational science. In this study, we focus on the numerical simulation of cardiovascular hemodynamics with rigid and deformable walls, discretized in space and time through the variational multi-scale finite element method. We focus on three appr… ▽ More Computing the solution of linear systems of equations is invariably the most time consuming task in the numerical solutions of PDEs in many fields of computational science. In this study, we focus on the numerical simulation of cardiovascular hemodynamics with rigid and deformable walls, discretized in space and time through the variational multi-scale finite element method. We focus on three approaches: the problem agnostic generalized minimum residual (GMRES) and stabilized bi-conjugate gradient (BICGS) methods, and a recently proposed, problem specific, bi-partitioned (BIPN) method. We also perform a comparative analysis of several preconditioners, including diagonal, block-diagonal, incomplete factorization, multi-grid, and resistance based methods. Solver performance and matrix characteristics (diagonal dominance, symmetry, sparsity, bandwidth and spectral properties) are first examined for an idealized cylindrical geometry with physiologic boundary conditions and then successively tested on several patient-specific anatomies representative of realistic cardiovascular simulation problems. Incomplete factorization pre-conditioners provide the best performance and results in terms of both strong and weak scalability. The BIPN method was found to outperform other methods in patient-specific models with rigid walls. In models with deformable walls, BIPN was outperformed by BICG with diagonal and Incomplete LU preconditioners. △ Less

Submitted 21 January, 2019; originally announced January 2019.

Comments: Accepted in Computational Mechanics

Lattice-mismatched semiconductor heterostructures

Authors: Dong Liu, Sang June Cho, Jung-Hun Seo, Kwangeun Kim, Munho Kim, Jian Shi, Xin Yin, Wonsik Choi, Chen Zhang, Jisoo Kim, Mohadeseh A. Baboli, Jeongpil Park, Jihye Bong, In-Kyu Lee, Jiarui Gong, Solomon Mikael, Jae Ha Ryu, Parsian K. Mohseni, Xiuling Li, Shaoqin Gong, Xudong Wang, Zhenqiang Ma

Abstract: Semiconductor heterostructure is a critical building block for modern semiconductor devices. However, forming semiconductor heterostructures of lattice-mismatch has been a great challenge for several decades. Epitaxial growth is infeasible to form abrupt heterostructures with large lattice-mismatch while mechanical-thermal bonding results in a high density of interface defects and therefore severe… ▽ More Semiconductor heterostructure is a critical building block for modern semiconductor devices. However, forming semiconductor heterostructures of lattice-mismatch has been a great challenge for several decades. Epitaxial growth is infeasible to form abrupt heterostructures with large lattice-mismatch while mechanical-thermal bonding results in a high density of interface defects and therefore severely limits device applications. Here we show an ultra-thin oxide-interfaced approach for the successful formation of lattice-mismatched semiconductor heterostructures. Following the depiction of a theory on the role of interface oxide in forming the heterostructures, we describe experimental demonstrations of Ge/Si (diamond lattices), Si/GaAs (zinc blende lattice), GaAs/GaN (hexagon lattice), and Si/GaN heterostructures. Extraordinary electrical performances in terms of ideality factor, current on/off ratio, and reverse breakdown voltage are measured from p-n diodes fabricated from the four types of heterostructures, significantly outperforming diodes derived from other methods. Our demonstrations indicate the versatility of the ultra-thin-oxide-interface approach in forming lattice-mismatched heterostructures, open up a much larger possibility for material combinations for heterostructures, and pave the way toward broader applications in electronic and optoelectronic realms. △ Less

Submitted 25 December, 2018; originally announced December 2018.

Comments: 29 pages, 6 figures, 1 table. Supplementary Information not included

Automatic evaluation of fetal head biometry from ultrasound images using machine learning

Authors: Hwa Pyung Kim, Sung Min Lee, Ja-Young Kwon, Ye** Park, Kang Cheol Kim, ** Keun Seo

Abstract: Ultrasound-based fetal biometric measurements, such as head circumference (HC) and biparietal diameter (BPD), are commonly used to evaluate the gestational age and diagnose fetal central nervous system (CNS) pathology. Since manual measurements are operator-dependent and time-consuming, there have been numerous researches on automated methods. However, existing automated methods still are not sati… ▽ More Ultrasound-based fetal biometric measurements, such as head circumference (HC) and biparietal diameter (BPD), are commonly used to evaluate the gestational age and diagnose fetal central nervous system (CNS) pathology. Since manual measurements are operator-dependent and time-consuming, there have been numerous researches on automated methods. However, existing automated methods still are not satisfactory in terms of accuracy and reliability, owing to difficulties in dealing with various artifacts in ultrasound images. This paper focuses on fetal head biometry and develops a deep-learning-based method for estimating HC and BPD with a high degree of accuracy and reliability. The proposed method effectively identifies the head boundary by differentiating tissue image patterns with respect to the ultrasound propagation direction. The proposed method was trained with 102 labeled data set and tested to 70 ultrasound images. We achieved a success rate of 92.31% for HC and BPD estimations, and an accuracy of 87.14 % for the plane acceptance check. △ Less

Submitted 18 August, 2018; originally announced August 2018.

Graphene-enabled, directed nanomaterial placement from solution for large-scale device integration

Authors: Michael Engel, Damon B. Farmer, Jaione Tirapu Azpiroz, Jung-Woo T. Seo, Joohoon Kang, Phaedon Avouris, Mark C. Hersam, Ralph Krupke, Mathias Steiner

Abstract: Controlled placement of nanomaterials at predefined locations with nanoscale precision remains among the most challenging problems that inhibit their large-scale integration in the field of semiconductor process technology. Methods based on surface functionalization have a drawback where undesired chemical modifications can occur and deteriorate the deposited material. The application of electric-… ▽ More Controlled placement of nanomaterials at predefined locations with nanoscale precision remains among the most challenging problems that inhibit their large-scale integration in the field of semiconductor process technology. Methods based on surface functionalization have a drawback where undesired chemical modifications can occur and deteriorate the deposited material. The application of electric-field assisted placement techniques eliminates the element of chemical treatment; however, it requires an incorporation of conductive placement electrodes that limit the performance, scaling, and density of integrated electronic devices. Here, we report a method for electric-field assisted placement of solution-processed nanomaterials by using large-scale graphene layers featuring nanoscale deposition sites. The structured graphene layers are prepared via either transfer or synthesis on standard substrates, then are removed without residue once nanomaterial deposition is completed, yielding material assemblies with nanoscale resolution that cover surface areas larger than 1mm2. In order to demonstrate the broad applicability, we have assembled representative zero-, one-, and two-dimensional semiconductors at predefined substrate locations and integrated them into nanoelectronic devices. This graphene-based placement technique affords nanoscale resolution at wafer scale, and could enable mass manufacturing of nanoelectronics and optoelectronics involving a wide range of nanomaterials prepared via solution-based approaches. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Comments: 17 pages, 5 figures

Effect of texture randomization on the slip and interfacial robustness in turbulent flows over superhydrophobic surfaces

Authors: Jongmin Seo, Ali Mani

Abstract: Superhydrophobic surfaces demonstrate promising potential for skin friction reduction in naval and hydrodynamic applications. Recent developments of superhydrophobic surfaces aiming for scalable applications use random distribution of roughness, such as spray coating and etched process. However, most of previous analyses of the interaction between flows and superhydrophobic surfaces studied period… ▽ More Superhydrophobic surfaces demonstrate promising potential for skin friction reduction in naval and hydrodynamic applications. Recent developments of superhydrophobic surfaces aiming for scalable applications use random distribution of roughness, such as spray coating and etched process. However, most of previous analyses of the interaction between flows and superhydrophobic surfaces studied periodic geometries that are economically feasible only in lab-scale experiments. We conduct direct numerical simulations of turbulent flows over randomly patterned interfaces considering a range of texture widths $w^+\approx 4-26$, and solid fractions $φ_s=11\%$ to $25\%$. Slip and no-slip boundary conditions are implemented in a pattern, modeling the presence of gas-liquid interfaces and solid elements. Our results indicate that slip of randomly distributed textures under turbulent flows are about $30\%$ less than those of surfaces with aligned features of the same size. In the small texture size limit $w^+\approx 4$, the slip length of the randomly distributed textures in turbulent flows is well described by a previously introduced Stokes flow solution of randomly distributed shear-free holes. By comparing DNS results for patterned slip and no-slip boundary against the corresponding homogenized slip length boundary conditions, we show that turbulent flows over randomly distributed posts can be represented by an isotropic slip length in streamwise and spanwise direction. The average pressure fluctuation on gas pocket is similar to that of the aligned features with the same texture size and gas fraction, but the maximum interface deformation at the leading edge of the roughness element is about twice larger when the textures are randomly distributed. △ Less

Submitted 27 September, 2017; v1 submitted 16 September, 2017; originally announced September 2017.

Comments: 15 pages, 7 figues

Journal ref: Phys. Rev. Fluids 3, 044601 (2018)

Deep learning for undersampled MRI reconstruction

Authors: Chang Min Hyun, Hwa Pyung Kim, Sung Min Lee, Sungchul Lee, ** Keun Seo

Abstract: This paper presents a deep learning method for faster magnetic resonance imaging (MRI) by reducing k-space data with sub-Nyquist sampling strategies and provides a rationale for why the proposed approach works well. Uniform subsampling is used in the time-consuming phase-encoding direction to capture high-resolution image information, while permitting the image-folding problem dictated by the Pois… ▽ More This paper presents a deep learning method for faster magnetic resonance imaging (MRI) by reducing k-space data with sub-Nyquist sampling strategies and provides a rationale for why the proposed approach works well. Uniform subsampling is used in the time-consuming phase-encoding direction to capture high-resolution image information, while permitting the image-folding problem dictated by the Poisson summation formula. To deal with the localization uncertainty due to image folding, very few low-frequency k-space data are added. Training the deep learning net involves input and output images that are pairs of Fourier transforms of the subsampled and fully sampled k-space data. Numerous experiments show the remarkable performance of the proposed method; only 29% of k-space data can generate images of high quality as effectively as standard MRI reconstruction with fully sampled data. △ Less

Submitted 12 May, 2019; v1 submitted 8 September, 2017; originally announced September 2017.

First principle study on the transition of electronic, mechanic and piezoelectric property of hexagonal Boron Nitride nanotube

Authors: Sheng Yu, Quinton Rice, Tikaram Neupane, Dulitha Jayakodige, Bagher Tabibi, Felix Jaetae Seo

Abstract: One-dimensional nanostructures such as nanowires and nanotubes are stimulating tremendous interest due to their structural, electronic and magnetic properties. In this study, the first principle calculation was performed to investigate on the size effect on the electronic, mechanic and piezoelectric properties of hexagonal-BN nanotube (BNNT). It demonstrates that the nanotube diameter can modulate… ▽ More One-dimensional nanostructures such as nanowires and nanotubes are stimulating tremendous interest due to their structural, electronic and magnetic properties. In this study, the first principle calculation was performed to investigate on the size effect on the electronic, mechanic and piezoelectric properties of hexagonal-BN nanotube (BNNT). It demonstrates that the nanotube diameter can modulate the direct bandgap significantly of the zigzag-BNNT, increasing from 3.96eV to 4.44eV with the larger diameter from 10 to 16 unit cells in circular direction. Both armchair and zigzag BNNT exhibit large elastic modulus, implying promising applications in nanoscale surface engineering, tribology and nanomanufacturing/nanofabrication. Outstanding piezoelectricity is also observed with large piezoelectric coefficient of 0.084C/m2 for 10-zigazag-BNNT and 0.13 C/m2 for 16-zigzag-BNNT, exhibiting excellent potential in producing mechao-electric power generators. △ Less

Submitted 11 December, 2019; v1 submitted 24 August, 2017; originally announced August 2017.

Comments: The results are less rigorous and even misleading

Enhanced piezoelectricity and electronic band structure transition assisted by atomic shift in MoS2 monolayer

Authors: Sheng Yu, Quinton Rice, Tikaram Neupane, Bagher Tabibi, Felix Jaetae Seo

Abstract: Piezoelectricity appears in the inversion asymmetric crystal that converts mechanical deformational force to electricity. Two-dimensional transition metal dichalcolgenide (TMDC) monolayers exhibit the piezoelectric effect due to the inversion asymmetry. The intrinsic piezoelectric coefficient (e11) of MoS2 is ~298 pC/m. For the single atomic shift of Mo of 20% along the armchair direction, the pie… ▽ More Piezoelectricity appears in the inversion asymmetric crystal that converts mechanical deformational force to electricity. Two-dimensional transition metal dichalcolgenide (TMDC) monolayers exhibit the piezoelectric effect due to the inversion asymmetry. The intrinsic piezoelectric coefficient (e11) of MoS2 is ~298 pC/m. For the single atomic shift of Mo of 20% along the armchair direction, the piezoelectric coefficient (e11) of MoS2 with 5x5 unit cells was enhanced up to 18%, and significantly modified the band structure. The single atomic shift in the MoS2 monolayer also induced new energy levels inside the forbidden bandgap. The defect-induced energy levels for a Mo atom shift along the armchair direction are relatively deeper than the energy levels for a S atom shift along the same direction. It indicates that the piezoelectricity and band structure of MoS2 can be engineered by a single atomic shift in the monolayer with multi unit cells for mechano-electrical applications. △ Less

Submitted 11 December, 2019; v1 submitted 14 August, 2017; originally announced August 2017.

Comments: The results are less rigorous and even misleading

229 nm UV LEDs using p-type silicon for increased hole injection

Authors: Dong Liu, Sang June Cho, Jeongpil Park, Jung-Hun Seo, Rafael Dalmau, Deyin Zhao, Kwangeun Kim, Munho Kim, In-Kyu Lee, John D. Albrecht, Weidong Zhou, Baxter Moody, Zhenqiang Ma

Abstract: Ultraviolet (UV) light emission at 229 nm wavelength from diode structures based on AlN/Al0.77Ga0.23N quantum wells and using p-type Si to significantly increase hole injection was reported. Both electrical and optical characteristics were measured. Owing to the large concentration of holes from p-Si and efficient hole injection, no efficiency droop was observed up to a current density of 76 A/cm2… ▽ More Ultraviolet (UV) light emission at 229 nm wavelength from diode structures based on AlN/Al0.77Ga0.23N quantum wells and using p-type Si to significantly increase hole injection was reported. Both electrical and optical characteristics were measured. Owing to the large concentration of holes from p-Si and efficient hole injection, no efficiency droop was observed up to a current density of 76 A/cm2 under continuous wave operation and without external thermal management. An optical output power of 160 uW was obtained with corresponding external quantum efficiency of 0.027%. This study demonstrates that by adopting p-type Si nanomembrane contacts as hole injector, practical levels of hole injection can be realized in UV light-emitting diodes with very high Al composition AlGaN quantum wells, enabling emission wavelengths and power levels that were previously inaccessible using traditional p-i-n structures with poor hole injection efficiency. △ Less

Submitted 13 August, 2017; originally announced August 2017.

Comments: 12 pages

Journal ref: published: Appl. Phys. Lett. 112, 081101 (2018)

CT sinogram-consistency learning for metal-induced beam hardening correction

Authors: Hyung Suk Park, Sung Min Lee, Hwa Pyung Kim, ** Keun Seo

Abstract: This paper proposes a sinogram consistency learning method to deal with beam-hardening related artifacts in polychromatic computerized tomography (CT). The presence of highly attenuating materials in the scan field causes an inconsistent sinogram, that does not match the range space of the Radon transform. When the mismatched data are entered into the range space during CT reconstruction, streakin… ▽ More This paper proposes a sinogram consistency learning method to deal with beam-hardening related artifacts in polychromatic computerized tomography (CT). The presence of highly attenuating materials in the scan field causes an inconsistent sinogram, that does not match the range space of the Radon transform. When the mismatched data are entered into the range space during CT reconstruction, streaking and shading artifacts are generated owing to the inherent nature of the inverse Radon transform. The proposed learning method aims to repair inconsistent sinograms by removing the primary metal-induced beam-hardening factors along the metal trace in the sinogram. Taking account of the fundamental difficulty in obtaining sufficient training data in a medical environment, the learning method is designed to use simulated training data and a patient-type specific learning model is used to simplify the learning process. The feasibility of the proposed method is investigated using a dataset, consisting of real CT scan of pelvises containing hip prostheses. The anatomical areas in training and test data are different, in order to demonstrate that the proposed method extracts the beam hardening features, selectively. The results show that our method successfully corrects sinogram inconsistency by extracting beam-hardening sources by means of deep learning. This paper proposed a deep learning method of sinogram correction for beam hardening reduction in CT for the first time. Conventional methods for beam hardening reduction are based on regularizations, and have the fundamental drawback of being not easily able to use manifold CT images, while a deep learning approach has the potential to do so. △ Less

Submitted 12 January, 2018; v1 submitted 2 August, 2017; originally announced August 2017.

Comments: 17 pages, 8 figures

Machine-learning-based nonlinear decomposition of CT images for metal artifact reduction

Authors: Hyung Suk Park, Sung Min Lee, Hwa Pyung Kim, ** Keun Seo

Abstract: Computed tomography (CT) images containing metallic objects commonly show severe streaking and shadow artifacts. Metal artifacts are caused by nonlinear beam-hardening effects combined with other factors such as scatter and Poisson noise. In this paper, we propose an implant-specific method that extracts beam-hardening artifacts from CT images without affecting the background image. We found that… ▽ More Computed tomography (CT) images containing metallic objects commonly show severe streaking and shadow artifacts. Metal artifacts are caused by nonlinear beam-hardening effects combined with other factors such as scatter and Poisson noise. In this paper, we propose an implant-specific method that extracts beam-hardening artifacts from CT images without affecting the background image. We found that in cases where metal is inserted in the water (or tissue), the generated beam-hardening artifacts can be approximately extracted by subtracting artifacts generated exclusively by metals. We used a deep learning technique to train nonlinear representations of beam-hardening artifacts arising from metals, which appear as shadows and streaking artifacts. The proposed network is not designed to identify ground-truth CT images (i.e., the CT image before its corruption by metal artifacts). Consequently, these images are not required for training. The proposed method was tested on a dataset consisting of real CT scans of pelvises containing simulated hip prostheses. The results demonstrate that the proposed deep learning method successfully extracts both shadowing and streaking artifacts. △ Less

Submitted 1 August, 2017; originally announced August 2017.

UVC LEDs on Bulk AlN Substrates Using Silicon Nanomembranes for Efficient Hole Injection

Authors: Sang June Cho, Dong Liu, Jung-Hun Seo, Rafael Dalmau, Kwangeun Kim, Jeongpil Park, Deyin Zhao, Xin Yin, Yei Hwan Jung, In-Kyu Lee, Munho Kim, Xudong Wang, John D. Albrecht, Weidong Zhou Baxter Moody, Zhenqiang Ma

Abstract: As UV LEDs are explored at shorter wavelengths (< 280 nm) into the UVC spectral range, the crystalline quality of epitaxial AlGaN films with high Al compositions and inefficient hole injection from p-type AlGaN severely limit the LED performance and development. In this work, we report on 237 nm light emission with a record light output power of 265 uW from AlN/Al0.72Ga028N multiple quantum well U… ▽ More As UV LEDs are explored at shorter wavelengths (< 280 nm) into the UVC spectral range, the crystalline quality of epitaxial AlGaN films with high Al compositions and inefficient hole injection from p-type AlGaN severely limit the LED performance and development. In this work, we report on 237 nm light emission with a record light output power of 265 uW from AlN/Al0.72Ga028N multiple quantum well UVC LEDs using bulk AlN substrates and p-type silicon nanomembrane contact layers for significantly improved AlGaN film quality and hole injection, respectively. No intensity degradation or efficiency droop was observed up to a current density of 245 A/cm2, which is attributed to the low dislocation density within AlGaN films, the large concentration of holes from p-Si, and efficient hole-transport to the active region. Additionally, the emission peak at 237 nm is dominant across the electroluminescence spectrum with no significant parasitic emissions observed. This study demonstrates the feasibility of using p-Si as a hole injector for UVC LEDs, which can be extended to even shorter wavelengths where hole injection from chemically doped AlGaN layers is not feasible. △ Less

Submitted 13 July, 2017; originally announced July 2017.

Comments: 25 pages, 7 figures