-
Scintillation Light in SBND: Simulation, Reconstruction, and Expected Performance of the Photon Detection System
Authors:
SBND Collaboration,
P. Abratenko,
R. Acciarri,
C. Adams,
L. Aliaga-Soplin,
O. Alterkait,
R. Alvarez-Garrote,
C. Andreopoulos,
A. Antonakis,
L. Arellano,
J. Asaadi,
W. Badgett,
S. Balasubramanian,
V. Basque,
A. Beever,
B. Behera,
E. Belchior,
M. Betancourt,
A. Bhat,
M. Bishai,
A. Blake,
B. Bogart,
J. Bogenschuetz,
D. Brailsford,
A. Brandt
, et al. (158 additional authors not shown)
Abstract:
SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its…
▽ More
SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its design is a dual readout concept combining a system of 120 photomultiplier tubes, used for triggering, with a system of 192 X-ARAPUCA devices, located behind the anode wire planes. Furthermore, covering the cathode plane with highly-reflective panels coated with a wavelength-shifting compound recovers part of the light emitted towards the cathode, where no optical detectors exist. We show how this new design provides a high light yield and a more uniform detection efficiency, an excellent timing resolution and an independent 3D-position reconstruction using only the scintillation light. Finally, the whole reconstruction chain is applied to recover the temporal structure of the beam spill, which is resolved with a resolution on the order of nanoseconds.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Plasma screening in mid-charged ions observed by K-shell line emission
Authors:
M. Šmıd,
O. Humphries,
C. Baehtz,
E. Brambrink,
T. Burian,
M. S. Cho,
T. E. Cowan,
L. Gaus,
V. Hájková,
L. Juha,
Z. Konopkova,
H. P. Le,
M. Makita,
X. Pan,
T. Preston,
A. Schropp,
H. A. Scott,
R. Štefanıková,
J. Vorberger,
W. Wang,
U. Zastrau,
K. Falk
Abstract:
Dense plasma environment affects the electronic structure of ions via variations of the microscopic electrical fields, also known as plasma screening. This effect can be either estimated by simplified analytical models, or by computationally expensive and to date unverified numerical calculations. We have experimentally quantified plasma screening from the energy shifts of the bound-bound transiti…
▽ More
Dense plasma environment affects the electronic structure of ions via variations of the microscopic electrical fields, also known as plasma screening. This effect can be either estimated by simplified analytical models, or by computationally expensive and to date unverified numerical calculations. We have experimentally quantified plasma screening from the energy shifts of the bound-bound transitions in matter driven by the x-ray free electron laser (XFEL). This was enabled by identification of detailed electronic configurations of the observed Kα, K\b{eta} and Kγ lines. This work paves the way for improving plasma screening models including connected effects like ionization potential depression and continuum lowering, which will advance the understanding of atomic physics in Warm Dense Matter regime.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
A New Optimization Methodology for Polar Direct Drive Illuminations at the National Ignition Facility
Authors:
Duncan Barlow,
A. Colaïtis,
D. Viala,
M. J. Rosenberg,
I. Igumenshchev,
V. Goncharov,
L. Ceurvorst,
P. B. Radha,
W. Theobald,
R. S. Craxton,
M. J. V. Streeter,
T. Chapman,
J. Mathiaud,
R. H. H. Scott,
K. Glize
Abstract:
A new, efficient, algorithmic approach to create illumination configurations for laser driven high energy density physics experiments is proposed. The method is applied to a polar direct drive solid target experiment at the National Ignition Facility (NIF), where it is simulated to create more than x2 higher peak pressure and x1.4 higher density by maintaining better shock uniformity. The analysis…
▽ More
A new, efficient, algorithmic approach to create illumination configurations for laser driven high energy density physics experiments is proposed. The method is applied to a polar direct drive solid target experiment at the National Ignition Facility (NIF), where it is simulated to create more than x2 higher peak pressure and x1.4 higher density by maintaining better shock uniformity. The analysis is focused on projecting shocks into solid targets at the NIF, but with minor adaptations the method could be applied to implosions, other target geometries and other facilities.
△ Less
Submitted 29 December, 2023; v1 submitted 30 November, 2023;
originally announced November 2023.
-
Decreasing ultrafast X-ray pulse durations with saturable absorption and resonant transitions
Authors:
Sebastian Cardoch,
Fabian Trost,
Howard A. Scott,
Henry N. Chapman,
Carl Caleman,
Nicusor Timneanu
Abstract:
Saturable absorption is a nonlinear effect where a material's ability to absorb light is frustrated due to a high influx of photons and the creation of electron vacancies. Experimentally induced saturable absorption in copper revealed a reduction in the temporal duration of transmitted X-ray laser pulses, but a complete understanding of this process is still missing. In this computational work, we…
▽ More
Saturable absorption is a nonlinear effect where a material's ability to absorb light is frustrated due to a high influx of photons and the creation of electron vacancies. Experimentally induced saturable absorption in copper revealed a reduction in the temporal duration of transmitted X-ray laser pulses, but a complete understanding of this process is still missing. In this computational work, we employ non-local thermodynamic equilibrium plasma simulations to study the interaction of femtosecond X-rays and copper. Following the onset of frustrated absorption, we find that a $K\text{--}M$ resonant transition occurring at highly charged states turns copper opaque again. The changes in absorption generate a transient transparent window responsible for the shortened transmission signal. We also propose using fluorescence induced by the incident beam as an alternative source to achieve shorter X-ray pulses. Intense femtosecond X-ray pulses are valuable to probe the structure and dynamics of biological samples or to reach extreme states of matter. Shortened pulses could be relevant for emerging imaging techniques.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Review of the 1st EUV Light Sources Code Comparison Workshop
Authors:
J. Sheil,
O. O. Versolato,
V. Bakshi,
H. A. Scott
Abstract:
We review the results of the 1st Extreme Ultraviolet (EUV) Light Sources Code Comparison Workshop, which was held online on 3rd November 2020. The goal of this workshop was to provide a platform for specialists in EUV light source plasma modeling to benchmark and validate their numerical codes using well-defined case studies. Eight institutions spanning four countries contributed data to the works…
▽ More
We review the results of the 1st Extreme Ultraviolet (EUV) Light Sources Code Comparison Workshop, which was held online on 3rd November 2020. The goal of this workshop was to provide a platform for specialists in EUV light source plasma modeling to benchmark and validate their numerical codes using well-defined case studies. Eight institutions spanning four countries contributed data to the workshop. Two topics were addressed, namely (i) the atomic kinetics and radiative properties of tin plasmas under EUV-generating conditions and (ii) laser absorption in a fully ionized, one-dimensional hydrogen plasma. In this paper, we summarize the key findings of the workshop and outline plans for future iterations of this code comparison activity.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Experiments conducted in the burning plasma regime with inertial fusion implosions
Authors:
J. S. Ross,
J. E. Ralph,
A. B. Zylstra,
A. L. Kritcher,
H. F. Robey,
C. V. Young,
O. A. Hurricane,
D. A. Callahan,
K. L. Baker,
D. T. Casey,
T. Doeppner,
L. Divol,
M. Hohenberger,
S. Le Pape,
A. Pak,
P. K. Patel,
R. Tommasini,
S. J. Ali,
P. A. Amendt,
L. J. Atherton,
B. Bachmann,
D. Bailey,
L. R. Benedetti,
L. Berzak Hopkins,
R. Betti
, et al. (127 additional authors not shown)
Abstract:
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into…
▽ More
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Orthotropic cyclic stress-softening model for pure shear during repeated loading and unloading
Authors:
S. R. Rickaby,
N. H. Scott
Abstract:
We derive an orthotropic model to describe the cyclic stress-softening of a carbon-filled rubber vulcanizate through multiple stress-strain cycles with increasing values of the maximum strain. We specialize the deformation to pure shear loading. As a result of strain-induced anisotropy following on from initial primary loading, the material may subsequently be described as orthotropic because in p…
▽ More
We derive an orthotropic model to describe the cyclic stress-softening of a carbon-filled rubber vulcanizate through multiple stress-strain cycles with increasing values of the maximum strain. We specialize the deformation to pure shear loading. As a result of strain-induced anisotropy following on from initial primary loading, the material may subsequently be described as orthotropic because in pure shear there are three different principal stretches so that the strain-induced anisotropy of the stress response is different in each of these three directions. We derive non-linear orthotropic models for the elastic response, stress relaxation and residual strain in order to model accurately the inelastic features associated with cyclic stress softening. We then develop an orthotropic version of the Arruda-Boyce eight-chain model of elasticity and then combine it with the ideas previously developed in this paper to produce an orthotropic constitutive relation for the cyclic stress-softening of a carbon-filled rubber vulcanizate. The model developed here includes the widely-occurring effects of hysteresis, stress-relaxation and residual strain. The model is found to compare well with experimental data. } {Mullins effect, stress-relaxation, hysteresis, residual strain, orthotropy.}
△ Less
Submitted 14 May, 2020;
originally announced June 2020.
-
The incremental bulk modulus, Young's modulus and Poisson's ratio in nonlinear isotropic elasticity: physically reasonable response
Authors:
N. H. Scott
Abstract:
An incremental (or tangent) bulk modulus for finite isotropic elasticity is defined which compares an increment in hydrostatic pressure with the corresponding increment in relative volume. Its positivity provides a stringent criterion for physically reasonable response involving the second derivatives of the strain energy function. Also, an average (or secant) bulk modulus is defined by comparing…
▽ More
An incremental (or tangent) bulk modulus for finite isotropic elasticity is defined which compares an increment in hydrostatic pressure with the corresponding increment in relative volume. Its positivity provides a stringent criterion for physically reasonable response involving the second derivatives of the strain energy function. Also, an average (or secant) bulk modulus is defined by comparing the current stress with the relative volume change. The positivity of this bulk modulus provides a physically reasonable response criterion less stringent than the former. The concept of incremental bulk modulus is extended to anisotropic elasticity. For states of uniaxial tension an incremental Poisson's ratio and an incremental Young's modulus are similarly defined for nonlinear isotropic elasticity and have properties similar to those of the incremental bulk modulus. The incremental Poisson's ratios for the isotropic constraints of incompressibility, Bell, Ericksen, and constant area are considered. The incremental moduli are all evaluated for a specific example of the compressible neo-Hookean solid. Bounds on the ground state Lamé elastic moduli, assumed positive, are given which are sufficient to guarantee the positivity of the incremental bulk and Young's moduli for all strains. However, although the ground state Poisson's ratio is positive we find that the incremental Poisson's ratio becomes negative for large enough axial extensions.
△ Less
Submitted 9 May, 2020;
originally announced May 2020.
-
Thermoelasticity and Generalized Thermoelasticity Viewed as Wave Hierarchies
Authors:
N. H. Scott
Abstract:
It is seen how to write the standardÊ form of the four partial differential equations in four unknowns of anisotropic thermoelasticity as a single equation in one variable, in terms of isothermal and isentropic wave operators. This equation, of diffusive type, is of the eighth order in the space derivatives and seventh order in the time derivatives and so is parabolic in character. After having se…
▽ More
It is seen how to write the standardÊ form of the four partial differential equations in four unknowns of anisotropic thermoelasticity as a single equation in one variable, in terms of isothermal and isentropic wave operators. This equation, of diffusive type, is of the eighth order in the space derivatives and seventh order in the time derivatives and so is parabolic in character. After having seen how to cast the 1D diffusion equation into Whitham's wave hierarchy form it is seen how to recast the full equation, for uni-directional motion, in wave hierarchy form. The higher order waves are isothermal and the lower order waves are isentropic or purely diffusive. The wave hierarchy form is then used to derive the main features of the solution of the initial value problem, thereby bypassing the need for an asymptotic analysis of the integral form of the exact solution. The results are specialized to the isotropic case. The theory of generalized thermoelasticity associates a relaxation time with the heat flux vector and the resulting system of equations is hyperbolic in character. It is seen also how to write this system in wave hierarchy form which is again used to derive the main features of the solution of the initial value problem. Simpler results are obtained in the isotropic case.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Energy flux and dissipation of inhomogeneous plane waves in hereditary viscoelasticity
Authors:
N. H. Scott
Abstract:
Inhomogeneous small-amplitude plane waves of (complex) frequency $ω$ are propagated through a linear dissipative material which displays hereditary viscoelasticity. The energy density, energy flux and dissipation are quadratic in the small quantities, namely, the displacement gradient, velocity and velocity gradient, each harmonic with frequency $ω$, and so give rise to attenuated constant terms a…
▽ More
Inhomogeneous small-amplitude plane waves of (complex) frequency $ω$ are propagated through a linear dissipative material which displays hereditary viscoelasticity. The energy density, energy flux and dissipation are quadratic in the small quantities, namely, the displacement gradient, velocity and velocity gradient, each harmonic with frequency $ω$, and so give rise to attenuated constant terms as well as to inhomogeneous plane waves of frequency $2ω$. The quadratic terms are usually removed by time averaging but we retain them here as they are of comparable magnitude with the time-averaged quantities of frequency $ω$. A new relationship is derived in hereditary viscoelasticity that connects the amplitudes of the terms of the energy density, energy flux and dissipation that have frequency $2ω$. It is shown that the complex group velocity is related to the amplitudes of the terms with frequency $2ω$ rather than to the attenuated constant terms as it is for homogeneous waves in conservative materials.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Influence of atomic kinetics on inverse Bremsstrahlung heating and non-local thermal transport
Authors:
H. P. Le,
M. Sherlock,
H. A. Scott
Abstract:
This paper describes a computational model that self-consistently combines physics of kinetic electrons and atomic processes in a single framework. The formulation consists of a kinetic Vlasov- Boltzmann-Fokker-Planck equation for free electrons and a non-Maxwellian collisional-radiative model for atomic state populations. We utilize this model to examine the influence of atomic kinetics on invers…
▽ More
This paper describes a computational model that self-consistently combines physics of kinetic electrons and atomic processes in a single framework. The formulation consists of a kinetic Vlasov- Boltzmann-Fokker-Planck equation for free electrons and a non-Maxwellian collisional-radiative model for atomic state populations. We utilize this model to examine the influence of atomic kinetics on inverse Bremsstrahlung (IB) heating and non-local thermal transport. We show that atomic kinetics affects non-linear IB absorption rates by further modifying the electron distribution in addition to laser heating. We also show that accurate modeling of non-local heat flow requires a self-consistent treatment of atomic kinetics, because the effective thermal conductivity strongly depends on the ionization balance of the plasma.
△ Less
Submitted 8 July, 2019; v1 submitted 20 June, 2019;
originally announced June 2019.
-
The Blind Implosion-Maker - Automated Inertial Confinement Fusion experiment design
Authors:
P. W. Hatfield,
S. J. Rose,
R. H. H. Scott
Abstract:
The design of inertial confinement fusion experiments, alongside improving the development of energy density physics theory and experimental methods, is one of the key challenges in the quest for nuclear fusion as a viable energy source. Recent challenges in achieving a high-yield implosion at the National Ignition Facility (NIF) have led to new interest in considering a much wider design paramete…
▽ More
The design of inertial confinement fusion experiments, alongside improving the development of energy density physics theory and experimental methods, is one of the key challenges in the quest for nuclear fusion as a viable energy source. Recent challenges in achieving a high-yield implosion at the National Ignition Facility (NIF) have led to new interest in considering a much wider design parameter space than normally studied. Here we report an algorithmic approach that can produce reasonable ICF designs with minimal assumptions. In particular we use the genetic algorithm metaheuristic, in which `populations' of implosions are simulated, the design of capsule is described by a `genome', natural selection removes poor designs, high quality designs are `mated' with each other based on their yield, and designs undergo `mutations' to introduce new ideas. We show that it takes ~5x10^4 simulations for the algorithm to find an original NIF design. We also link this method to other parts of the design process and look towards a completely automated ICF experiment design process - changing ICF from an experiment design problem to an algorithm design problem.
△ Less
Submitted 20 May, 2019;
originally announced May 2019.
-
Review of the 10th Non-LTE Code Comparison Workshop
Authors:
S. B. Hansen,
H. -K. Chung,
C. J. Fontes,
Yu. Ralchenko,
H. A. Scott,
E. Stambulchik
Abstract:
We report on the results of the 10th Non-LTE code comparison workshop, which was held at the University of San Diego campus November 28 through December 1, 2017. Non-equilibrium collisional-radiative models predict the electronic state populations and attendant emission and absorption characteristics of hot, dense matter and are used to help design and diagnose high-energy-density experiments. At…
▽ More
We report on the results of the 10th Non-LTE code comparison workshop, which was held at the University of San Diego campus November 28 through December 1, 2017. Non-equilibrium collisional-radiative models predict the electronic state populations and attendant emission and absorption characteristics of hot, dense matter and are used to help design and diagnose high-energy-density experiments. At this workshop, fifteen codes from eleven institutions contributed results for steady-state and time-dependent neon, aluminum, silicon, and chlorine cases relevant to a variety of high-density experimental and radiation-driven astrophysical systems. This report focuses on differences in the predictions from codes with different internal structure, completeness, density effects, and rate fidelity and the impact of those differences on hot, dense plasma diagnostics.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Impact of free electron degeneracy on collisional rates in plasmas
Authors:
Gareth O. Williams,
H. -K. Chung,
S. Künzel,
V. Hilbert,
U. Zastrau,
H. Scott,
S. Daboussi,
B. Iwan,
A. I. Gonzalez,
W. Boutu,
H. J. Lee,
B. Nagler,
E. Granados,
E. Galtier,
P. Heimann,
B. Barbrel,
R. W. Lee,
B. I. Cho,
P. Renaudin,
H. Merdji,
Ph. Zeitoun,
M. Fajardo
Abstract:
Degenerate plasmas, in which quantum effects dictate the behavior of free electrons, are ubiquitous on earth and throughout space. Transitions between bound and free electron states determine basic plasma properties, yet the effects of degeneracy on these transitions have only been theorized. Here, we use an x-ray free electron laser to create and characterize a degenerate plasma. We observe a cor…
▽ More
Degenerate plasmas, in which quantum effects dictate the behavior of free electrons, are ubiquitous on earth and throughout space. Transitions between bound and free electron states determine basic plasma properties, yet the effects of degeneracy on these transitions have only been theorized. Here, we use an x-ray free electron laser to create and characterize a degenerate plasma. We observe a core electron fluorescence spectrum that cannot be reproduced by models that ignore free electron degeneracy.We show that degeneracy acts to restrict the available electron energy states, thereby slowing the rate of transitions to and from the continuum. We couple degeneracy and bound electron dynamics in an existing collisional-radiative code, which agrees well with observations. The impact of the shape of the cross section, and hence the magnitude of the correction due to degeneracy, is also discussed. This study shows that degeneracy in plasmas can significantly influence experimental observables such as the emission spectra, and that these effects can be included parametrically in well-established atomic physics codes. This work narrows the gap in understanding between the condensed-matter and plasma phases, which coexist in myriad scenarios.
△ Less
Submitted 6 January, 2020; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Ultrafast Imaging of Laser Driven Shock Waves using Betatron X-rays from a Laser Wakefield Accelerator
Authors:
J. C. Wood,
D. J. Chapman,
K. Poder,
N. C. Lopes,
M. E. Rutherford,
T. G. White,
F. Albert,
K. T. Behm,
N. Booth,
J. S. J. Bryant,
P. S. Foster,
S. Glenzer,
E. Hill,
K. Krushelnick,
Z. Najmudin,
B. B. Pollock,
S. Rose,
W. Schumaker,
R. H. H. Scott,
M. Sherlock,
A. G. R. Thomas,
Z. Zhao,
D. Eakins,
S. P. D. Mangles
Abstract:
Betatron radiation from laser wakefield accelerators is an ultrashort pulsed source of hard, synchrotron-like x-ray radiation. It emanates from a centimetre scale plasma accelerator producing GeV level electron beams. In recent years betatron radiation has been developed as a unique source capable of producing high resolution x-ray images in compact geometries. However, until now, the short pulse…
▽ More
Betatron radiation from laser wakefield accelerators is an ultrashort pulsed source of hard, synchrotron-like x-ray radiation. It emanates from a centimetre scale plasma accelerator producing GeV level electron beams. In recent years betatron radiation has been developed as a unique source capable of producing high resolution x-ray images in compact geometries. However, until now, the short pulse nature of this radiation has not been exploited. This report details the first experiment to utilise betatron radiation to image a rapidly evolving phenomenon by using it to radiograph a laser driven shock wave in a silicon target. The spatial resolution of the image is comparable to what has been achieved in similar experiments at conventional synchrotron light sources. The intrinsic temporal resolution of betatron radiation is below 100 fs, indicating that significantly faster processes could be probed in future without compromising spatial resolution. Quantitative measurements of the shock velocity and material density were made from the radiographs recorded during shock compression and were consistent with the established shock response of silicon, as determined with traditional velocimetry approaches. This suggests that future compact betatron imaging beamlines could be useful in the imaging and diagnosis of high-energy-density physics experiments.
△ Less
Submitted 6 February, 2018;
originally announced February 2018.
-
High-Sensitivity Measurement of 3He-4He Isotopic Ratios for Ultracold Neutron Experiments
Authors:
H. P. Mumm,
M. G. Huber,
W. Bauder,
N. Abrams,
C. M. Deibel,
C. R. Huffer,
P. R. Huffman,
K. W. Schelhammer,
C. M. Swank,
R. Janssens,
C. L. Jiang,
R. H. Scott,
R. C. Pardo,
K. E. Rehm,
R. Vondrasek,
C. M. O'Shaughnessy,
M. Paul,
L. Yang
Abstract:
Research efforts ranging from studies of solid helium to searches for a neutron electric dipole moment require isotopically purified helium with a ratio of 3He to 4He at levels below that which can be measured using traditional mass spectroscopy techniques. We demonstrate an approach to such a measurement using accelerator mass spectroscopy, reaching the 10e-14 level of sensitivity, several orders…
▽ More
Research efforts ranging from studies of solid helium to searches for a neutron electric dipole moment require isotopically purified helium with a ratio of 3He to 4He at levels below that which can be measured using traditional mass spectroscopy techniques. We demonstrate an approach to such a measurement using accelerator mass spectroscopy, reaching the 10e-14 level of sensitivity, several orders of magnitude more sensitive than other techniques. Measurements of 3He/4He in samples relevant to the measurement of the neutron lifetime indicate the need for substantial corrections. We also argue that there is a clear path forward to sensitivity increases of at least another order of magnitude.
△ Less
Submitted 31 December, 2015;
originally announced December 2015.
-
A focusable, convergent fast-electron beam from ultra-high-intensity laser-solid interactions
Authors:
R. H. H. Scott
Abstract:
A novel scheme for the creation of a convergent, or focussing, fast-electron beam generated from ultra-high-intensity laser-solid interactions is described. Self-consistent particle-in-cell simulations are used to demonstrate the efficacy of this scheme in two dimensions. It is shown that a beam of fast-electrons of energy 500 keV - 3 MeV propagates within a solid-density plasma, focussing at dept…
▽ More
A novel scheme for the creation of a convergent, or focussing, fast-electron beam generated from ultra-high-intensity laser-solid interactions is described. Self-consistent particle-in-cell simulations are used to demonstrate the efficacy of this scheme in two dimensions. It is shown that a beam of fast-electrons of energy 500 keV - 3 MeV propagates within a solid-density plasma, focussing at depth. The depth of focus of the fast-electron beam is controlled via the target dimensions and focussing optics.
△ Less
Submitted 29 January, 2015;
originally announced January 2015.
-
Measuring fast electron spectra and laser absorption in relativistic laser-solid interactions using differential bremsstrahlung photon detectors
Authors:
R. H. H. Scott,
E. L. Clark,
F. Perez,
M. J. V Streeter,
J. R. Davies,
H. -P. Schlenvoigt,
J. J. Santos,
S. Hulin,
K. L. Lancaster,
S. D. Baton,
S. J. Rose,
P. A. Norreys
Abstract:
A photon detector suitable for the measurement of bremsstrahlung spectra generated in relativistically-intense laser-solid interactions is described. The Monte Carlo techniques used to back-out the fast electron spectrum and laser energy absorbed into fast electrons are detailed. A relativistically-intense laser-solid experiment using frequency doubled laser light is used to demonstrate the effect…
▽ More
A photon detector suitable for the measurement of bremsstrahlung spectra generated in relativistically-intense laser-solid interactions is described. The Monte Carlo techniques used to back-out the fast electron spectrum and laser energy absorbed into fast electrons are detailed. A relativistically-intense laser-solid experiment using frequency doubled laser light is used to demonstrate the effective operation of the detector. The experimental data was interpreted using the 3-spatial-dimension Monte Carlo code MCNPX (Pelowitz 2008), and the fast electron temperature found to be 125 keV.
△ Less
Submitted 1 May, 2013; v1 submitted 30 April, 2013;
originally announced April 2013.
-
Numerical Modeling of the Sensitivity of X-Ray Driven Implosions to Low-Mode Flux Asymmetries
Authors:
R. H. H. Scott,
D. S. Clark,
D. K. Bradley,
D. A. Callahan,
M. J. Edwards,
S. W. Haan,
O. S. Jones,
B. K. Spears,
M. M. Marinak,
R. P. J. Town,
P. A. Norreys,
L. J. Suter
Abstract:
The sensitivity of inertial confinement fusion implosions of the type performed on the National Ignition Facility (NIF) to low-mode flux asymmetries has been investigated numerically. It is shown that large-amplitude, low-order mode shapes (Legendre polynomial P4), resulting from associated low order flux asymmetries, cause spatial variations in capsule and fuel momentum that prevent the DT ice la…
▽ More
The sensitivity of inertial confinement fusion implosions of the type performed on the National Ignition Facility (NIF) to low-mode flux asymmetries has been investigated numerically. It is shown that large-amplitude, low-order mode shapes (Legendre polynomial P4), resulting from associated low order flux asymmetries, cause spatial variations in capsule and fuel momentum that prevent the DT ice layer from being decelerated uniformly by the hot spot pressure. This reduces the transfer of kinetic to internal energy of the central hot spot, thus reducing neutron yield. Furthermore, synthetic gated x-ray images of the hot spot self-emission indicate that P4 shapes may be unquantifiable for DT layered capsules. Instead the positive P4 asymmetry aliases itself as an oblate P4 in the x-ray self emission images. Correction of this apparent P2 distortion can further distort the implosion while creating a round x-ray image. Long wavelength asymmetries may be playing a significant role in the observed yield reduction of NIF DT implosions relative to detailed post-shot 2D simulations.
△ Less
Submitted 13 December, 2012;
originally announced December 2012.
-
Controlling fast electron beam divergence using two laser pulses
Authors:
R. H. H. Scott,
C. Beaucourt,
H. -P. Schlenvoigt,
K. Markey,
K. L. Lancaster,
C. P. Ridgers,
C. M. Brenner,
J. Pasley,
R. J. Gray,
I. O. Musgrave,
A. P. L Robinson,
K. Li,
M. M. Notley,
J. R. Davies,
S. D. Baton,
J. J. Santos,
J. -L. Feugeas,
Ph. Nicolaï,
G. Malka,
V. T. Tikhonchuk,
P. McKenna,
D. Neely,
S. J. Rose,
P. A. Norreys
Abstract:
This paper describes the first experimental demonstration of the guiding of a relativistic electron beam in a solid target using two co-linear, relativistically intense, picosecond laser pulses. The first pulse creates a magnetic field which guides the higher current fast electron beam generated by the second pulse. The effects of intensity ratio, delay, total energy and intrinsic pre-pulse are ex…
▽ More
This paper describes the first experimental demonstration of the guiding of a relativistic electron beam in a solid target using two co-linear, relativistically intense, picosecond laser pulses. The first pulse creates a magnetic field which guides the higher current fast electron beam generated by the second pulse. The effects of intensity ratio, delay, total energy and intrinsic pre-pulse are examined. Thermal and Kα imaging showed reduced emission size, increased peak emission and increased total emission at delays of 4 - 6 ps, an intensity ratio of 10 : 1 (second:first) and a total energy of 186 J. In comparison to a single, high contrast shot, the inferred fast electron divergence is reduced by 2.7 times, while the fast electron current density is increased by a factor of 1.8. The enhancements are reproduced with modelling and are shown to be due to the self-generation of magnetic fields. Such a scheme could be of considerable benefit to fast ignition inertial fusion.
△ Less
Submitted 15 May, 2012; v1 submitted 9 December, 2010;
originally announced December 2010.
-
Observation of post-soliton expansion following laser propagation through an underdense plasma
Authors:
G. Sarri,
1 D. K. Singh,
2 J. R. Davies,
2 K. L. Lancaster,
3 E. L. Clark,
4 S. Hassan,
4 J. Jiang,
2 N. Kageiwa,
N. Lopes,
A. Rehman,
C. Russo,
R. H. H. Scott,
T. Tanimoto,
Z. Najmudin,
K. A. Tanaka,
M. Tatarakis,
M. Borghesi,
P. A. Norreys
Abstract:
The expansion of electromagnetic post-solitons emerging from the interaction of a 30 ps, $3\times 10^{18}$ W cm$^{-2}$ laser pulse with an underdense deuterium plasma has been observed up to 100 ps after the pulse propagation, when large numbers of post-solitons were seen to remain in the plasma. The temporal evolution of the post-solitons has been accurately characterized with a high spatial and…
▽ More
The expansion of electromagnetic post-solitons emerging from the interaction of a 30 ps, $3\times 10^{18}$ W cm$^{-2}$ laser pulse with an underdense deuterium plasma has been observed up to 100 ps after the pulse propagation, when large numbers of post-solitons were seen to remain in the plasma. The temporal evolution of the post-solitons has been accurately characterized with a high spatial and temporal resolution. The observed expansion is compared to analytical models and three dimensional particle-in-cell results providing indication of the polarisation dependence of the post-soliton dynamics.
△ Less
Submitted 1 July, 2010;
originally announced July 2010.
-
Interaction of ultrashort X-ray pulses with B4C, SiC and Si
Authors:
M. Bergh,
N. Timneanu,
S. P. Hau-Riege,
H. A. Scott
Abstract:
The interaction of 32.5 and 6 nm ultrashort X-ray pulses with the solid materials B4C, SiC and Si is simulated with a non-local thermodynamic equilibrium (NLTE) radiation transfer code. We study the ionization dynamics as function of depth in the material, modifications of the opacity during irradiation and estimate crater depth. Furthermore, we compare the estimated crater depth with experiment…
▽ More
The interaction of 32.5 and 6 nm ultrashort X-ray pulses with the solid materials B4C, SiC and Si is simulated with a non-local thermodynamic equilibrium (NLTE) radiation transfer code. We study the ionization dynamics as function of depth in the material, modifications of the opacity during irradiation and estimate crater depth. Furthermore, we compare the estimated crater depth with experimental data, for fluences up to 2.2 J/cm2. Our results show that at 32.5 nm irradiation, the opacity changes with less than a factor of 2 for B4C and Si and a factor of 3 for SiC, for fluences up to 200 J/cm2. At a laser wavelength of 6 nm, the model predicts a dramatic decrease in opacity due to the weak inverse bremsstrahlung, increasing the crater depth for high fluences.
△ Less
Submitted 27 September, 2007;
originally announced September 2007.
-
Detailed Radiative Transport Modeling of a Radiative Divertor
Authors:
A. S. Wan,
H. E. Dalhed,
H. A. Scott,
D. E. Post,
T. D. Rognlien
Abstract:
An effective radiative divertor maximizes the utilization of atomic processes to spread out the energy deposition to the divertor chamber walls and to reduce the peak heat flux. Because the mixture of neutral atoms and ions in the divertor can be optically thick to a portion of radiated power, it is necessary to accurately model the magnitude and distribution of line radiation in this complex re…
▽ More
An effective radiative divertor maximizes the utilization of atomic processes to spread out the energy deposition to the divertor chamber walls and to reduce the peak heat flux. Because the mixture of neutral atoms and ions in the divertor can be optically thick to a portion of radiated power, it is necessary to accurately model the magnitude and distribution of line radiation in this complex region. To assess their importance we calculate the effects of radiation transport using CRETIN, a multi-dimensional, non-local thermodynamic equilibrium simulation code that includes the atomic kinetics and radiative transport processes necessary to model the complex environment of a radiative divertor. We also include neutral transport to model radiation from recycling neutral atoms. This paper presents a case study of a high-recycling radiative divertor with a typical large neutral pressure at the divertor plate to estimate the impact of H line radiation on the overall power balance in the divertor region with consideration for line opacities and atomic kinetics.
△ Less
Submitted 11 July, 1995;
originally announced July 1995.