Showing 1–16 of 16 results for author: Schwartz, E

LIGO operates with quantum noise below the Standard Quantum Limit

Authors: Wenxuan Jia, Victoria Xu, Kevin Kuns, Masayuki Nakano, Lisa Barsotti, Matthew Evans, Nergis Mavalvala, Rich Abbott, Ibrahim Abouelfettouh, Rana Adhikari, Alena Ananyeva, Stephen Appert, Koji Arai, Naoki Aritomi, Stuart Aston, Matthew Ball, Stefan Ballmer, David Barker, Beverly Berger, Joseph Betzwieser, Dripta Bhattacharjee, Garilynn Billingsley, Nina Bode, Edgard Bonilla, Vladimir Bossilkov , et al. (146 additional authors not shown)

Abstract: Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Stan… ▽ More Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Standard Quantum Limit (SQL). Reducing quantum noise below the SQL in gravitational-wave detectors, where photons are used to continuously measure the positions of freely falling mirrors, has been an active area of research for decades. Here we show how the LIGO A+ upgrade reduced the detectors' quantum noise below the SQL by up to 3 dB while achieving a broadband sensitivity improvement, more than two decades after this possibility was first presented. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Report number: LIGO-P2400059

Synchronous Detection of Cosmic Rays and Correlated Errors in Superconducting Qubit Arrays

Authors: Patrick M. Harrington, Mingyu Li, Max Hays, Wouter Van De Pontseele, Daniel Mayer, H. Douglas Pinckney, Felipe Contipelli, Michael Gingras, Bethany M. Niedzielski, Hannah Stickler, Jonilyn L. Yoder, Mollie E. Schwartz, Jeffrey A. Grover, Kyle Serniak, William D. Oliver, Joseph A. Formaggio

Abstract: Quantum information processing at scale will require sufficiently stable and long-lived qubits, likely enabled by error-correction codes. Several recent superconducting-qubit experiments, however, reported observing intermittent spatiotemporally correlated errors that would be problematic for conventional codes, with ionizing radiation being a likely cause. Here, we directly measured the cosmic-ra… ▽ More Quantum information processing at scale will require sufficiently stable and long-lived qubits, likely enabled by error-correction codes. Several recent superconducting-qubit experiments, however, reported observing intermittent spatiotemporally correlated errors that would be problematic for conventional codes, with ionizing radiation being a likely cause. Here, we directly measured the cosmic-ray contribution to spatiotemporally correlated qubit errors. We accomplished this by synchronously monitoring cosmic-ray detectors and qubit energy-relaxation dynamics of 10 transmon qubits distributed across a 5x5x0.35 mm$^3$ silicon chip. Cosmic rays caused correlated errors at a rate of 1/(10 min), accounting for 17$\pm$1% of all such events. Our qubits responded to essentially all of the cosmic rays and their secondary particles incident on the chip, consistent with the independently measured arrival flux. Moreover, we observed that the landscape of the superconducting gap in proximity to the Josephson junctions dramatically impacts the qubit response to cosmic rays. Given the practical difficulties associated with shielding cosmic rays, our results indicate the importance of radiation hardening -- for example, superconducting gap engineering -- to the realization of robust quantum error correction. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Comments: 34 pages, 16 figures

4D iterative reconstruction of brain fMRI in the moving fetus

Authors: Athena Taymourtash, Hamza Kebiri, Sébastien Tourbier, Ernst Schwartz, Karl-Heinz Nenning, Roxane Licandro, Daniel Sobotka, Hélène Lajous, Priscille de Dumast, Meritxell Bach Cuadra, Georg Langs

Abstract: Resting-state functional Magnetic Resonance Imaging (fMRI) is a powerful imaging technique for studying functional development of the brain in utero. However, unpredictable and excessive movement of fetuses has limited clinical application since it causes substantial signal fluctuations which can systematically alter observed patterns of functional connectivity. Previous studies have focused on th… ▽ More Resting-state functional Magnetic Resonance Imaging (fMRI) is a powerful imaging technique for studying functional development of the brain in utero. However, unpredictable and excessive movement of fetuses has limited clinical application since it causes substantial signal fluctuations which can systematically alter observed patterns of functional connectivity. Previous studies have focused on the accurate estimation of the motion parameters in case of large fetal head movement and used a 3D single step interpolation approach at each timepoint to recover motion-free fMRI images. This does not guarantee that the reconstructed image corresponds to the minimum error representation of fMRI time series given the acquired data. Here, we propose a novel technique based on four dimensional iterative reconstruction of the scattered slices acquired during fetal fMRI. The accuracy of the proposed method was quantitatively evaluated on a group of real clinical fMRI fetuses. The results indicate improvements of reconstruction quality compared to the conventional 3D interpolation approach. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Comments: 5 pages, 3 figures. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Point Absorber Limits to Future Gravitational-Wave Detectors

Authors: W. Jia, H. Yamamoto, K. Kuns, A. Effler, M. Evans, P. Fritschel, R. Abbott, C. Adams, R. X. Adhikari, A. Ananyeva, S. Appert, K. Arai, J. S. Areeda, Y. Asali, S. M. Aston, C. Austin, A. M. Baer, M. Ball, S. W. Ballmer, S. Banagiri, D. Barker, L. Barsotti, J. Bartlett, B. K. Berger, J. Betzwieser , et al. (176 additional authors not shown)

Abstract: High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some hig… ▽ More High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some high-power cavity experiments, for example, the Advanced LIGO gravitational wave detector. In this Letter, we present a general approach to the point absorber effect from first principles and simulate its contribution to the increased scattering. The achievable circulating power in current and future gravitational-wave detectors is calculated statistically given different point absorber configurations. Our formulation is further confirmed experimentally in comparison with the scattered power in the arm cavity of Advanced LIGO measured by in-situ photodiodes. The understanding presented here provides an important tool in the global effort to design future gravitational wave detectors that support high optical power, and thus reduce quantum noise. △ Less

Submitted 17 September, 2021; originally announced September 2021.

Comments: 7 pages, 3 figures

Report number: LIGO-P2100331

LIGOs Quantum Response to Squeezed States

Authors: L. McCuller, S. E. Dwyer, A. C. Green, Haocun Yu, L. Barsotti, C. D. Blair, D. D. Brown, A. Effler, M. Evans, A. Fernandez-Galiana, P. Fritschel, V. V. Frolov, N. Kijbunchoo, G. L. Mansell, F. Matichard, N. Mavalvala, D. E. McClelland, T. McRae, A. Mullavey, D. Sigg, B. J. J. Slagmolen, M. Tse, T. Vo, R. L. Ward, C. Whittle , et al. (172 additional authors not shown)

Abstract: Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to furth… ▽ More Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to further expand our gravitational view of the universe. Further reducing quantum noise will require both lowering decoherence from losses as well more sophisticated manipulations to counter the quantum back-action from radiation pressure. Both tasks require fully understanding the physical interactions between squeezed light and the many components of km-scale interferometers. To this end, data from both LIGO observatories in observing run three are expressed using frequency-dependent metrics to analyze each detector's quantum response to squeezed states. The response metrics are derived and used to concisely describe physical mechanisms behind squeezing's simultaneous interaction with transverse-mode selective optical cavities and the quantum radiation pressure noise of suspended mirrors. These metrics and related analysis are broadly applicable for cavity-enhanced optomechanics experiments that incorporate external squeezing, and -- for the first time -- give physical descriptions of every feature so far observed in the quantum noise of the LIGO detectors. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Comments: 24 pages, 5 figures

Report number: P2100050

Journal ref: Phys. Rev. D 104, 062006 (2021)

Point absorbers in Advanced LIGO

Authors: Aidan F. Brooks, Gabriele Vajente, Hiro Yamamoto, Rich Abbott, Carl Adams, Rana X. Adhikari, Alena Ananyeva, Stephen Appert, Koji Arai, Joseph S. Areeda, Yasmeen Asali, Stuart M. Aston, Corey Austin, Anne M. Baer, Matthew Ball, Stefan W. Ballmer, Sharan Banagiri, David Barker, Lisa Barsotti, Jeffrey Bartlett, Beverly K. Berger, Joseph Betzwieser, Dripta Bhattacharjee, Garilynn Billingsley, Sebastien Biscans , et al. (176 additional authors not shown)

Abstract: Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback contro… ▽ More Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises. △ Less

Submitted 25 March, 2021; v1 submitted 14 January, 2021; originally announced January 2021.

Comments: 49 pages, 16 figures. -V2: typographical errors in equations B9 and B10 were corrected (stray exponent of "h" was removed). Caption of Figure 9 was corrected to indicate that 40mW was used for absorption in the model, not 10mW as incorrectly indicated in V1

Report number: Report-no: P1900287

Improving the Robustness of the Advanced LIGO Detectors to Earthquakes

Authors: Eyal Schwartz, A Pele, J Warner, B Lantz, J Betzwieser, K L Dooley, S Biscans, M Coughlin, N Mukund, R Abbott, C Adams, R X Adhikari, A Ananyeva, S Appert, K Arai, J S Areeda, Y Asali, S M Aston, C Austin, A M Baer, M Ball, S W Ballmer, S Banagiri, D Barker, L Barsotti , et al. (174 additional authors not shown)

Abstract: Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differenti… ▽ More Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differential motion of the interferometer arms with respect to one another, resulting in a reduction of DARM signal at frequencies below 100\,mHz. Our method greatly improved the interferometers' capability to remain operational during earthquakes, with ground velocities up to 3.9\,$μ\mbox{m/s}$ rms in the beam direction, setting a new record for both detectors. This sets a milestone in seismic controls of the Advanced LIGO detectors' ability to manage high ground motion induced by earthquakes, opening a path for further robust operation in other extreme environmental conditions. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Direct Measurements of Collisional Dynamics in Cold Atom Triads

Authors: L. A. Reynolds, E. Schwartz, U. Ebling, M. Weyland, J. Brand, M. F. Andersen

Abstract: The introduction of optical tweezers for trap** atoms has opened remarkable opportunities for manipulating few-body systems. Here, we present the first bottom-up assembly of atom triads. We directly observe atom loss through inelastic collisions at the single event level, overcoming the substantial challenge in many-atom experiments of distinguishing one-, two-, and three-particle processes. We… ▽ More The introduction of optical tweezers for trap** atoms has opened remarkable opportunities for manipulating few-body systems. Here, we present the first bottom-up assembly of atom triads. We directly observe atom loss through inelastic collisions at the single event level, overcoming the substantial challenge in many-atom experiments of distinguishing one-, two-, and three-particle processes. We measure a strong suppression of three-body loss, which is not fully explained by the presently availably theory for three-body processes. The suppression of losses could indicate the presence of local anti-correlations due to the interplay of attractive short range interactions and low dimensional confinement. Our methodology opens a promising pathway in experimental few-body dynamics. △ Less

Submitted 15 January, 2020; originally announced January 2020.

Comments: 11 pages, 4 figures, includes Supplemental Material

Journal ref: Phys. Rev. Lett. 124, 073401 (2020)

Quantifying Residual Motion Artifacts in Fetal fMRI Data

Authors: Athena Taymourtash, Ernst Schwartz, Karl-Heinz Nenning, Daniel Sobotka, Mariana Diogo, Gregor Kasprian, Daniela Prayer, Georg Langs

Abstract: Fetal functional Magnetic Resonance Imaging (fMRI) has emerged as a powerful tool for investigating brain development in utero, holding promise for generating developmental disease biomarkers and supporting prenatal diagnosis. However, to date its clinical applications have been limited by unpredictable fetal and maternal motion during image acquisition. Even after spatial realigment, these cause… ▽ More Fetal functional Magnetic Resonance Imaging (fMRI) has emerged as a powerful tool for investigating brain development in utero, holding promise for generating developmental disease biomarkers and supporting prenatal diagnosis. However, to date its clinical applications have been limited by unpredictable fetal and maternal motion during image acquisition. Even after spatial realigment, these cause spurious signal fluctuations confounding measures of functional connectivity and biasing statistical inference of relationships between connectivity and individual differences. As there is no ground truth for the brain's functional structure, especially before birth, quantifying the quality of motion correction is challenging. In this paper, we propose evaluating the efficacy of different regression based methods for removing motion artifacts after realignment by assessing the residual relationship of functional connectivity with estimated motion, and with the distance between areas. Results demonstrate the sensitivity of our evaluation's criteria to reveal the relative strengths and weaknesses among different artifact removal methods, and underscore the need for greater care when dealing with fetal motion. △ Less

Submitted 11 January, 2020; originally announced January 2020.

Comments: 10 pages, 3 figures, International Workshop on Preterm, Perinatal and Paediatric Image Analysis

Solid-state qubits integrated with superconducting through-silicon vias

Authors: Donna-Ruth W. Yost, Mollie E. Schwartz, Justin Mallek, Danna Rosenberg, Corey Stull, Jonilyn L. Yoder, Greg Calusine, Matt Cook, Rabindra Das, Alexandra L. Day, Evan B. Golden, David K. Kim, Alexander Melville, Bethany M. Niedzielski, Wayne Woods, Andrew J. Kerman, Willam D. Oliver

Abstract: As superconducting qubit circuits become more complex, addressing a large array of qubits becomes a challenging engineering problem. Dense arrays of qubits benefit from, and may require, access via the third dimension to alleviate interconnect crowding. Through-silicon vias (TSVs) represent a promising approach to three-dimensional (3D) integration in superconducting qubit arrays -- provided they… ▽ More As superconducting qubit circuits become more complex, addressing a large array of qubits becomes a challenging engineering problem. Dense arrays of qubits benefit from, and may require, access via the third dimension to alleviate interconnect crowding. Through-silicon vias (TSVs) represent a promising approach to three-dimensional (3D) integration in superconducting qubit arrays -- provided they are compact enough to support densely-packed qubit systems without compromising qubit performance or low-loss signal and control routing. In this work, we demonstrate the integration of superconducting, high-aspect ratio TSVs -- 10 $μ$m wide by 20 $μ$m long by 200 $μ$m deep -- with superconducting qubits. We utilize TSVs for baseband control and high-fidelity microwave readout of qubits using a two-chip, bump-bonded architecture. We also validate the fabrication of qubits directly upon the surface of a TSV-integrated chip. These key 3D integration milestones pave the way for the control and readout of high-density superconducting qubit arrays using superconducting TSVs. △ Less

Submitted 29 September, 2020; v1 submitted 23 December, 2019; originally announced December 2019.

Comments: 8 pages; 4 figures

Journal ref: npj Quantum Information 6, 59 (2020)

Silicon Hard-Stop Spacers for 3D Integration of Superconducting Qubits

Authors: Bethany M. Niedzielski, David K. Kim, Mollie E. Schwartz, Danna Rosenberg, Greg Calusine, Rabi Das, Alexander J. Melville, Jason Plant, Livia Racz, Jonilyn L. Yoder, Donna Ruth-Yost, William D. Oliver

Abstract: As designs for superconducting qubits become more complex, 3D integration of two or more vertically bonded chips will become necessary to enable increased density and connectivity. Precise control of the spacing between these chips is required for accurate prediction of circuit performance. In this paper, we demonstrate an improvement in the planarity of bonded superconducting qubit chips while re… ▽ More As designs for superconducting qubits become more complex, 3D integration of two or more vertically bonded chips will become necessary to enable increased density and connectivity. Precise control of the spacing between these chips is required for accurate prediction of circuit performance. In this paper, we demonstrate an improvement in the planarity of bonded superconducting qubit chips while retaining device performance by utilizing hard-stop silicon spacer posts. These silicon spacers are defined by etching several microns into a silicon substrate and are compatible with 3D-integrated qubit fabrication. This includes fabrication of Josephson junctions, superconducting air-bridge crossovers, underbump metallization and indium bumps. To qualify the integrated process, we demonstrate high-quality factor resonators on the etched surface and measure qubit coherence (T1, T2,echo > 40 μs) in the presence of silicon posts as near as 350 μm to the qubit. △ Less

Submitted 30 July, 2019; originally announced July 2019.

Superconducting Qubits: Current State of Play

Authors: Morten Kjaergaard, Mollie E. Schwartz, Jochen Braumüller, Philip Krantz, Joel I-Jan Wang, Simon Gustavsson, William D. Oliver

Abstract: Superconducting qubits are leading candidates in the race to build a quantum computer capable of realizing computations beyond the reach of modern supercomputers. The superconducting qubit modality has been used to demonstrate prototype algorithms in the 'noisy intermediate scale quantum' (NISQ) technology era, in which non-error-corrected qubits are used to implement quantum simulations and quant… ▽ More Superconducting qubits are leading candidates in the race to build a quantum computer capable of realizing computations beyond the reach of modern supercomputers. The superconducting qubit modality has been used to demonstrate prototype algorithms in the 'noisy intermediate scale quantum' (NISQ) technology era, in which non-error-corrected qubits are used to implement quantum simulations and quantum algorithms. With the recent demonstrations of multiple high fidelity two-qubit gates as well as operations on logical qubits in extensible superconducting qubit systems, this modality also holds promise for the longer-term goal of building larger-scale error-corrected quantum computers. In this brief review, we discuss several of the recent experimental advances in qubit hardware, gate implementations, readout capabilities, early NISQ algorithm implementations, and quantum error correction using superconducting qubits. While continued work on many aspects of this technology is certainly necessary, the pace of both conceptual and technical progress in the last years has been impressive, and here we hope to convey the excitement stemming from this progress. △ Less

Submitted 21 April, 2020; v1 submitted 31 May, 2019; originally announced May 2019.

Comments: 28 pages, 4 figures

Journal ref: Annual Reviews of Condensed Matter Physics 11, 369-395 (2020)

Thermally-robust spin correlations between two 85Rb atoms in an optical microtrap

Authors: Pimonpan Sompet, Stuart S. Szigeti, Eyal Schwartz, Ashton S. Bradley, Mikkel F. Andersen

Abstract: The complex collisional properties of atoms fundamentally limit investigations into a range of processes in many-atom ensembles. In contrast, the bottom-up assembly of few- and many-body systems from individual atoms offers a controlled approach to isolating and studying such collisional processes. Here, we use optical tweezers to individually assemble pairs of trapped $^{85}$Rb atoms, and study t… ▽ More The complex collisional properties of atoms fundamentally limit investigations into a range of processes in many-atom ensembles. In contrast, the bottom-up assembly of few- and many-body systems from individual atoms offers a controlled approach to isolating and studying such collisional processes. Here, we use optical tweezers to individually assemble pairs of trapped $^{85}$Rb atoms, and study the spin dynamics of the two-body system in a thermal state. The spin-2 atoms show strong pair correlation between magnetic sublevels on timescales exceeding one second, with measured relative number fluctuations $11.9\pm0.3$ dB below quantum shot noise, limited only by detection efficiency. Spin populations display relaxation dynamics consistent with simulations and theoretical predictions for $^{85}$Rb spin interactions, and contrary to the coherent spin waves witnessed in finite-temperature many-body experiments and zero-temperature two-body experiments. Our experimental approach offers a versatile platform for studying two-body quantum dynamics and may provide a route to thermally-robust entanglement generation. △ Less

Submitted 19 July, 2019; v1 submitted 4 July, 2018; originally announced July 2018.

Comments: 11 pages + 7 pages supplemental, 5 figures. Close to published version, note slight change in title

Journal ref: Nature Communications 10, 1889 (2019)

Zeeman-insensitive cooling of a single atom to its two-dimensional motional ground state in tightly focused optical tweezers

Authors: Pimonpan Sompet, Yin H. Fung, Eyal Schwartz, Matt D. J. Hunter, **daratsamee Phrompao, Mikkel F. Andersen

Abstract: We combine near--deterministic preparation of a single atom with Raman sideband cooling, to create a push button mechanism to prepare a single atom in the motional ground state of tightly focused optical tweezers. In the 2D radial plane, we achieve a large ground state fidelity for the entire procedure (loading and cooling) of $\sim$0.73, while the ground state occupancy is $\sim$0.88 for realizat… ▽ More We combine near--deterministic preparation of a single atom with Raman sideband cooling, to create a push button mechanism to prepare a single atom in the motional ground state of tightly focused optical tweezers. In the 2D radial plane, we achieve a large ground state fidelity for the entire procedure (loading and cooling) of $\sim$0.73, while the ground state occupancy is $\sim$0.88 for realizations with a single atom present. For 1D axial cooling, we attain a ground state fraction of $\sim$0.52. The combined 3D cooling provides a ground state population of $\sim$0.11. Our Raman sideband cooling variation is indifferent to magnetic field fluctuations, allowing wide--spread unshielded experimental implementations. Our work provides a pathway towards a range of coherent few body experiments. △ Less

Submitted 5 March, 2017; v1 submitted 11 December, 2016; originally announced December 2016.

Journal ref: Phys. Rev. A 95, 031403 (2017)

Hybrid Quantum-Classical Hierarchy for Mitigation of Decoherence and Determination of Excited States

Authors: Jarrod R. McClean, Mollie E. Schwartz, Jonathan Carter, Wibe A. de Jong

Abstract: Using quantum devices supported by classical computational resources is a promising approach to quantum-enabled computation. One example of such a hybrid quantum-classical approach is the variational quantum eigensolver (VQE) built to utilize quantum resources for the solution of eigenvalue problems and optimizations with minimal coherence time requirements by leveraging classical computational re… ▽ More Using quantum devices supported by classical computational resources is a promising approach to quantum-enabled computation. One example of such a hybrid quantum-classical approach is the variational quantum eigensolver (VQE) built to utilize quantum resources for the solution of eigenvalue problems and optimizations with minimal coherence time requirements by leveraging classical computational resources. These algorithms have been placed among the candidates for first to achieve supremacy over classical computation. Here, we provide evidence for the conjecture that variational approaches can automatically suppress even non-systematic decoherence errors by introducing an exactly solvable channel model of variational state preparation. Moreover, we show how variational quantum-classical approaches fit in a more general hierarchy of measurement and classical computation that allows one to obtain increasingly accurate solutions with additional classical resources. We demonstrate numerically on a sample electronic system that this method both allows for the accurate determination of excited electronic states as well as reduces the impact of decoherence, without using any additional quantum coherence time or formal error correction codes. △ Less

Submitted 17 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. A 95, 042308 (2017)

Spectroscopic identification of habitable extra-solar planets

Authors: Eyal Schwartz, Stephen G. Lipson, Erez N. Ribak

Abstract: An Earth-like extra-solar planet emits light which is many orders of magnitude fainter than that of the parent star. We propose a method of identifying bio-signature spectral lines in light from known extra-solar planets based on Fourier spectroscopy in the infra-red, using an off-center part of a Fourier interferogram only. This results in superior sensitivity to narrower molecular-type spectral… ▽ More An Earth-like extra-solar planet emits light which is many orders of magnitude fainter than that of the parent star. We propose a method of identifying bio-signature spectral lines in light from known extra-solar planets based on Fourier spectroscopy in the infra-red, using an off-center part of a Fourier interferogram only. This results in superior sensitivity to narrower molecular-type spectral bands, which are expected in the planet spectrum but are absent in the parent star. We support this idea by numerical simulations which include photon and thermal noise, and show it to be feasible at a luminosity ratio of 10^-6 for a Sun-like parent star in the infra-red. We also carried out a laboratory experiment to illustrate the method. The results suggest that this method should be applicable to real planet searches. △ Less

Submitted 22 March, 2012; originally announced March 2012.