Showing 1–50 of 57 results for author: Schroeder, T

Quantum Electrometer for Time-Resolved Material Science at the Atomic Lattice Scale

Authors: Gregor Pieplow, Cem Güney Torun, Joseph H. D. Munns, Franziska Marie Herrmann, Andreas Thies, Tommaso Pregnolato, Tim Schröder

Abstract: The detection of individual charges plays a crucial role in fundamental material science and the advancement of classical and quantum high-performance technologies that operate with low noise. However, resolving charges at the lattice scale in a time-resolved manner has not been achieved so far. Here, we present the development of an electrometer, leveraging on the spectroscopy of an optically-act… ▽ More The detection of individual charges plays a crucial role in fundamental material science and the advancement of classical and quantum high-performance technologies that operate with low noise. However, resolving charges at the lattice scale in a time-resolved manner has not been achieved so far. Here, we present the development of an electrometer, leveraging on the spectroscopy of an optically-active spin defect embedded in a solid-state material with a non-linear Stark response. By applying our approach to diamond, a widely used platform for quantum technology applications, we successfully localize charge traps, quantify their impact on transport dynamics and noise generation, analyze relevant material properties, and develop strategies for material optimization. △ Less

Submitted 25 January, 2024; originally announced January 2024.

Comments: Main: 9 pages, 5 figures; Supplement: 14 pages, 10 figures

Diamond-on-chip infrared absorption magnetic field camera

Authors: Julian M. Bopp, Hauke Conradi, Felipe Perona, Anil Palaci, Jonas Wollenberg, Thomas Flisgen, Armin Liero, Heike Christopher, Norbert Keil, Wolfgang Knolle, Andrea Knigge, Wolfgang Heinrich, Moritz Kleinert, Tim Schröder

Abstract: Integrated and fiber-packaged magnetic field sensors with a sensitivity sufficient to sense electric pulses propagating along nerves in life science applications and with a spatial resolution fine enough to resolve their propagation directions will trigger a tremendous step ahead not only in medical diagnostics, but in understanding neural processes. Nitrogen-vacancy centers in diamond represent t… ▽ More Integrated and fiber-packaged magnetic field sensors with a sensitivity sufficient to sense electric pulses propagating along nerves in life science applications and with a spatial resolution fine enough to resolve their propagation directions will trigger a tremendous step ahead not only in medical diagnostics, but in understanding neural processes. Nitrogen-vacancy centers in diamond represent the leading platform for such sensing tasks under ambient conditions. Current research on uniting a good sensitivity and a high spatial resolution is facilitated by scanning or imaging techniques. However, these techniques employ moving parts or bulky microscope setups. Despite being far developed, both approaches cannot be integrated and fiber-packaged to build a robust, adjustment-free hand-held device. In this work, we introduce novel concepts for spatially resolved magnetic field sensing and 2-D gradiometry with an integrated magnetic field camera. The camera is based on infrared absorption optically detected magnetic resonance (IRA-ODMR) mediated by perpendicularly intersecting infrared and pump laser beams forming a pixel matrix. We demonstrate our 3-by-3 pixel sensor's capability to reconstruct the position of an electromagnet in space. Furthermore, we identify routes to enhance the magnetic field camera's sensitivity and spatial resolution as required for complex sensing applications. △ Less

Submitted 4 December, 2023; originally announced January 2024.

Comments: Main part: 14 pages, 5 figures

Optical probing of phononic properties of a tin-vacancy color center in diamond

Authors: Cem Güney Torun, Joseph H. D. Munns, Franziska Marie Herrmann, Viviana Villafane, Kai Müller, Andreas Thies, Tommaso Pregnolato, Gregor Pieplow, Tim Schröder

Abstract: The coherence characteristics of a tin-vacancy color center in diamond are investigated through optical means including coherent population trap** between the ground state orbital levels and linewidth broadening effects. Due to the large spin-orbit splitting of the orbital ground states, thermalization between the ground states occurs at rates that are impractical to measure directly. Here, spec… ▽ More The coherence characteristics of a tin-vacancy color center in diamond are investigated through optical means including coherent population trap** between the ground state orbital levels and linewidth broadening effects. Due to the large spin-orbit splitting of the orbital ground states, thermalization between the ground states occurs at rates that are impractical to measure directly. Here, spectral information is transformed into its conjugate variable time, providing picosecond resolution and revealing an orbital depolarization timescale of ${\sim30{\rm~ps}}$. Consequences of the investigated dynamics are then used to estimate spin dephasing times limited by thermal effects. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Comments: 17 pages, 14 figures, 1 table

AlGaN/AlN heterostructures: an emerging platform for nonlinear integrated photonics

Authors: Sinan Gündogdu, Sofia Pazzagli, Tommaso Pregnolato, Tim Kolbe, Sylvia Hagedorn, Markus Weyers, Tim Schröder

Abstract: In the rapidly evolving area of integrated photonics, there is a growing need for materials that satisfy the particular requirements of increasingly complex and specialized devices and applications. Present photonic material platforms have made significant progress over the past years; however, each platform still faces specific material and performance challenges. We introduce a novel material fo… ▽ More In the rapidly evolving area of integrated photonics, there is a growing need for materials that satisfy the particular requirements of increasingly complex and specialized devices and applications. Present photonic material platforms have made significant progress over the past years; however, each platform still faces specific material and performance challenges. We introduce a novel material for integrated photonics: Aluminum Gallium Nitride (AlGaN) on Aluminum Nitride (AlN) as a platform for develo** reconfigurable and nonlinear on-chip optical systems. AlGaN combines compatibility with standard semiconductor fabrication technologies, high electro-optic modulation capabilities, and large nonlinear coefficients while providing a broad and low-loss spectral transmission range, making it a viable material for advanced photonic applications. In this work, we design and grow AlGaN/AlN heterostructures and integrate fundamental photonic building blocks into these chips. In particular, we fabricate edge couplers, low-loss waveguides, directional couplers, and tunable high-quality factor ring resonators to enable nonlinear light-matter interaction and quantum functionality. The comprehensive platform we present in this work paves the way for nonlinear photon-pair generation applications, on-chip nonlinear quantum frequency conversion, and fast electro-optic modulation for switching and routing classical and quantum light fields. △ Less

Submitted 1 May, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

Fabrication of Sawfish photonic crystal cavities in bulk diamond

Authors: Tommaso Pregnolato, Marco E. Stucki, Julian M. Bopp, Maarten H. v. d. Hoeven, Alok Gokhale, Olaf Krüger, Tim Schröder

Abstract: Color centers in diamond are quantum systems with optically active spin-states that show long coherence times and are therefore a promising candidate for the development of efficient spin-photon interfaces. However, only a small portion of the emitted photons is generated by the coherent optical transition of the zero-phonon line (ZPL), which limits the overall performance of the system. Embedding… ▽ More Color centers in diamond are quantum systems with optically active spin-states that show long coherence times and are therefore a promising candidate for the development of efficient spin-photon interfaces. However, only a small portion of the emitted photons is generated by the coherent optical transition of the zero-phonon line (ZPL), which limits the overall performance of the system. Embedding these emitters in photonic crystal cavities improves the coupling to the ZPL photons and increases their emission rate. Here, we demonstrate the fabrication process of "Sawfish" cavities, a design recently proposed that has the experimentally-realistic potential to simultaneously enhance the emission rate by a factor of 46 and couple photons into a single-mode fiber with an efficiency of 88%. The presented process allows for the fabrication of fully suspended devices with a total length of 20.5 $μ$m and features size as small as 40 nm. The optical characterization shows fundamental mode resonances that follow the behavior expected from the corresponding design parameters and quality (Q) factors as high as 3825. Finally, we investigate the effects of nanofabrication on the devices and show that, despite a noticeable erosion of the fine features, the measured cavity resonances deviate by only 0.9 (1.2)% from the corresponding simulated values. This proves that the Sawfish design is robust against fabrication imperfections, which makes it an attractive choice for the development of quantum photonic networks. △ Less

Submitted 14 November, 2023; v1 submitted 6 November, 2023; originally announced November 2023.

Comments: 7 pages, 9 figures

Harmful Conspiracies in Temporal Interaction Networks: Understanding the Dynamics of Digital Wildfires through Phase Transitions

Authors: Kaspara Skovli Gåsvær, Pedro G. Lind, Johannes Langguth, Morten Hjorth-Jensen, Michael Kreil, Daniel Thilo Schroeder

Abstract: Shortly after the first COVID-19 cases became apparent in December 2020, rumors spread on social media suggesting a connection between the virus and the 5G radiation emanating from the recently deployed telecommunications network. In the course of the following weeks, this idea gained increasing popularity, and various alleged explanations for how such a connection manifests emerged. Ultimately, a… ▽ More Shortly after the first COVID-19 cases became apparent in December 2020, rumors spread on social media suggesting a connection between the virus and the 5G radiation emanating from the recently deployed telecommunications network. In the course of the following weeks, this idea gained increasing popularity, and various alleged explanations for how such a connection manifests emerged. Ultimately, after being amplified by prominent conspiracy theorists, a series of arson attacks on telecommunication equipment follows, concluding with the kidnap** of telecommunication technicians in Peru. In this paper, we study the spread of content related to a conspiracy theory with harmful consequences, a so-called digital wildfire. In particular, we investigate the 5G and COVID-19 misinformation event on Twitter before, during, and after its peak in April and May 2020. For this purpose, we examine the community dynamics in complex temporal interaction networks underlying Twitter user activity. We assess the evolution of such digital wildfires by appropriately defining the temporal dynamics of communication in communities within social networks. We show that, for this specific misinformation event, the number of interactions of the users participating in a digital wildfire, as well as the size of the engaged communities, both follow a power-law distribution. Moreover, our research elucidates the possibility of quantifying the phases of a digital wildfire, as per established literature. We identify one such phase as a critical transition, marked by a shift from sporadic tweets to a global spread event, highlighting the dramatic scaling of misinformation propagation. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Polarization-Tuned Fano Resonances in All-Dielectric Short-Wave Infrared Metasurface

Authors: Anis Attiaoui, Gérard Daligou, Simone Assali, Oliver Skibitzki, Thomas Schroeder, Oussama Moutanabbir

Abstract: The short-wave infrared (SWIR) is an underexploited portion of the electromagnetic spectrum in metasurface-based nanophotonics despite its strategic importance in sensing and imaging applications. This is mainly attributed to the lack of material systems to tailor light-matter interactions in this range. Herein, we address this limitation and demonstrate an all-dielectric silicon-integrated metasu… ▽ More The short-wave infrared (SWIR) is an underexploited portion of the electromagnetic spectrum in metasurface-based nanophotonics despite its strategic importance in sensing and imaging applications. This is mainly attributed to the lack of material systems to tailor light-matter interactions in this range. Herein, we address this limitation and demonstrate an all-dielectric silicon-integrated metasurface enabling polarization-induced Fano resonance control at SWIR frequencies. The platform consists of a two-dimensional Si/GeSn core/shell nanowire array on a silicon wafer. By tuning the light polarization, we show that the metasurface reflectance can be efficiently engineered due to Fano resonances emerging from the electric and magnetic dipoles competition. The interference of optically induced dipoles in high-index nanowire arrays offers additional degrees of freedom to tailor the directional scattering and the flow of light while enabling sharp polarization-modulated resonances. This tunability is harnessed in nanosensors yielding an efficient detection of 10^{-2} changes in the refractive index of the surrounding medium. △ Less

Submitted 1 December, 2022; originally announced December 2022.

'Sawfish' Photonic Crystal Cavity for Near-Unity Emitter-to-Fiber Interfacing in Quantum Network Applications

Authors: Julian M. Bopp, Matthias Plock, Tim Turan, Gregor Pieplow, Sven Burger, Tim Schröder

Abstract: Photon loss is one of the key challenges to overcome in complex photonic quantum applications. Photon collection efficiencies directly impact the amount of resources required for measurement-based quantum computation and communication networks. Promising resources include solid-state quantum light sources, however, efficiently coupling light from a single quantum emitter to a guided mode remains d… ▽ More Photon loss is one of the key challenges to overcome in complex photonic quantum applications. Photon collection efficiencies directly impact the amount of resources required for measurement-based quantum computation and communication networks. Promising resources include solid-state quantum light sources, however, efficiently coupling light from a single quantum emitter to a guided mode remains demanding. In this work, we eliminate photon losses by maximizing coupling efficiencies in an emitter-to-fiber interface. We develop a waveguide-integrated 'Sawfish' photonic crystal cavity and use finite element simulations to demonstrate that our system transfers, with 97.4% efficiency, the zero-phonon line emission of a negatively-charged tin vacancy center in diamond adiabatically to a single-mode fiber. A surrogate model trained by machine learning provides quantitative estimates of sensitivities to fabrication tolerances. Our corrugation-based design proves robust under state-of-the-art nanofabrication parameters, maintaining an emitter-to-fiber coupling efficiency of 88.6%. To demonstrate its potential in reducing resource requirements, we apply the Sawfish cavity to a recent one-way quantum repeater protocol. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Comments: Main part: 16 pages, 7 figures

Journal ref: Adv. Optical Mater. 12, 2301286 (2024)

How is model-related uncertainty quantified and reported in different disciplines?

Authors: Emily G. Simmonds, Kwaku Peprah Adjei, Christoffer Wold Andersen, Janne Cathrin Hetle Aspheim, Claudia Battistin, Nicola Bulso, Hannah Christensen, Benjamin Cretois, Ryan Cubero, Ivan A. Davidovich, Lisa Dickel, Benjamin Dunn, Etienne Dunn-Sigouin, Karin Dyrstad, Sigurd Einum, Donata Giglio, Haakon Gjerlow, Amelie Godefroidt, Ricardo Gonzalez-Gil, Soledad Gonzalo Cogno, Fabian Grosse, Paul Halloran, Mari F. Jensen, John James Kennedy, Peter Egge Langsaether , et al. (18 additional authors not shown)

Abstract: How do we know how much we know? Quantifying uncertainty associated with our modelling work is the only way we can answer how much we know about any phenomenon. With quantitative science now highly influential in the public sphere and the results from models translating into action, we must support our conclusions with sufficient rigour to produce useful, reproducible results. Incomplete considera… ▽ More How do we know how much we know? Quantifying uncertainty associated with our modelling work is the only way we can answer how much we know about any phenomenon. With quantitative science now highly influential in the public sphere and the results from models translating into action, we must support our conclusions with sufficient rigour to produce useful, reproducible results. Incomplete consideration of model-based uncertainties can lead to false conclusions with real world impacts. Despite these potentially damaging consequences, uncertainty consideration is incomplete both within and across scientific fields. We take a unique interdisciplinary approach and conduct a systematic audit of model-related uncertainty quantification from seven scientific fields, spanning the biological, physical, and social sciences. Our results show no single field is achieving complete consideration of model uncertainties, but together we can fill the gaps. We propose opportunities to improve the quantification of uncertainty through use of a source framework for uncertainty consideration, model type specific guidelines, improved presentation, and shared best practice. We also identify shared outstanding challenges (uncertainty in input data, balancing trade-offs, error propagation, and defining how much uncertainty is required). Finally, we make nine concrete recommendations for current practice (following good practice guidelines and an uncertainty checklist, presenting uncertainty numerically, and propagating model-related uncertainty into conclusions), future research priorities (uncertainty in input data, quantifying uncertainty in complex models, and the importance of missing uncertainty in different contexts), and general research standards across the sciences (transparency about study limitations and dedicated uncertainty sections of manuscripts). △ Less

Submitted 1 July, 2022; v1 submitted 24 June, 2022; originally announced June 2022.

Comments: 40 Pages (including supporting information), 3 Figures, 2 Boxes, 1 Table

Optically coherent nitrogen-vacancy defect centers in diamond nanostructures

Authors: Laura Orphal-Kobin, Kilian Unterguggenberger, Tommaso Pregnolato, Natalia Kemf, Matthias Matalla, Ralph-Stephan Unger, Ina Ostermay, Gregor Pieplow, Tim Schröder

Abstract: Optically active solid-state spin defects have the potential to become a versatile resource for quantum information processing applications. Nitrogen-vacancy defect centers (NV) in diamond act as quantum memories and can be interfaced by coherent photons as demonstrated in entanglement protocols. However, in particular in diamond nanostructures, the effect of spectral diffusion leads to optical de… ▽ More Optically active solid-state spin defects have the potential to become a versatile resource for quantum information processing applications. Nitrogen-vacancy defect centers (NV) in diamond act as quantum memories and can be interfaced by coherent photons as demonstrated in entanglement protocols. However, in particular in diamond nanostructures, the effect of spectral diffusion leads to optical decoherence hindering entanglement generation. In this work, we present strategies to significantly reduce the electric noise in diamond nanostructures. We demonstrate single NVs in nanopillars exhibiting lifetime-limited linewidth on the time scale of one second and long-term spectral stability with inhomogeneous linewidth as low as 150 MHz over three minutes. Excitation power and energy-dependent measurements in combination with nanoscopic Monte Carlo simulations contribute to a better understanding of the impact of bulk and surface defects on the NV's spectral properties. Finally, we propose an entanglement protocol for nanostructure-coupled NVs providing entanglement generation rates up to hundreds of kHz. △ Less

Submitted 10 March, 2022; originally announced March 2022.

Comments: Main part: 13 pages, 5 figures

Journal ref: Phys. Rev. X 13, 011042 (2023)

Scaling properties of liquid dynamics predicted from a single configuration: Small rigid molecules

Authors: Zahraa Sheydaafar, Jeppe C. Dyre, Thomas B. Schrøder

Abstract: Isomorphs are curves in the thermodynamic phase diagram along which structure and dynamics are invariant to a good approximation. There are two main ways to trace out isomorphs, the configurational-adiabat method and the direct-isomorph-check method. Recently a new method based on the scaling properties of forces was introduced and shown to work very well for atomic systems [T. B. Schroder, Phys.… ▽ More Isomorphs are curves in the thermodynamic phase diagram along which structure and dynamics are invariant to a good approximation. There are two main ways to trace out isomorphs, the configurational-adiabat method and the direct-isomorph-check method. Recently a new method based on the scaling properties of forces was introduced and shown to work very well for atomic systems [T. B. Schroder, Phys. Rev. Lett. 129, 245501 (2022)]. A unique feature of this method is that it only requires a single equilibrium configuration for tracing out an isomorph. We here test generalizations of this method to molecular systems and compare to simulations of three simple molecular models: the asymmetric dumbbell model of two Lennard-Jones spheres, the symmetric inverse-power-law dumbbell model, and the Lewis-Wahnström o-terphenyl model. We introduce and test two force-based and one torque-based methods, all of which require just a single configuration for tracing out an isomorph. Overall, the method based on requiring invariant center-of-mass reduced forces works best. △ Less

Submitted 8 April, 2023; v1 submitted 28 May, 2021; originally announced May 2021.

Comments: 20 pages, 12 figures

Journal ref: J. Phys. Chem. B 127, 2837 (2023)

Optimized diamond inverted nanocones for enhanced color center to fiber coupling

Authors: Cem Güney Torun, Philipp-Immanuel Schneider, Martin Hammerschmidt, Sven Burger, Joseph H. D. Munns, Tim Schröder

Abstract: Nanostructures can be used for boosting the light outcoupling of color centers in diamond; however, the fiber coupling performance of these nanostructures is rarely investigated. Here, we use a finite element method for computing the emission from color centers in inverted nanocones and the overlap of this emission with the propagation mode in a single-mode fiber. Using different figures of merit,… ▽ More Nanostructures can be used for boosting the light outcoupling of color centers in diamond; however, the fiber coupling performance of these nanostructures is rarely investigated. Here, we use a finite element method for computing the emission from color centers in inverted nanocones and the overlap of this emission with the propagation mode in a single-mode fiber. Using different figures of merit, the inverted nanocone parameters are optimized to obtain maximal fiber coupling efficiency, free-space collection efficiency, or rate enhancement. The optimized inverted nanocone designs show promising results with 66% fiber coupling or 83% free-space coupling efficiency at the tin-vacancy center zero-phonon line wavelength of 619 nm. Moreover, when evaluated for broadband performance, the optimized designs show 55% and 76% for fiber coupling and free-space efficiencies respectively, for collecting the full tin-vacancy emission spectrum at room temperature. An analysis of fabrication insensitivity indicates that these nanostructures are robust against imperfections. For maximum emission rate into a fiber mode, a design with a Purcell factor of 2.34 is identified. Finally, possible improvements offered by a hybrid inverted nanocone, formed by patterning into two different materials, are investigated, and increases the achievable fiber coupling efficiency to 71%. △ Less

Submitted 27 May, 2021; originally announced May 2021.

Comments: The following article has been accepted by Applied Physics Letters. After it is published, it will be found at https://doi.org/10.1063/5.0050338

Journal ref: Appl. Phys. Lett. 118, 234002 (2021)

Predicting scaling properties from a single fluid configuration

Authors: Thomas B. Schrøder

Abstract: Time-dependent dynamical properties of a fluid can not be estimated from a single configuration without performing a simulation. Here we show, however, that the scaling properties of both structure and dynamics can be predicted from a single configuration. The new method is demonstrated to work very well for equilibrium dynamics of the Kob-Andersen Binary Lennard-Jones mixture. Furthermore, the me… ▽ More Time-dependent dynamical properties of a fluid can not be estimated from a single configuration without performing a simulation. Here we show, however, that the scaling properties of both structure and dynamics can be predicted from a single configuration. The new method is demonstrated to work very well for equilibrium dynamics of the Kob-Andersen Binary Lennard-Jones mixture. Furthermore, the method is applied to isobaric cooling where the liquid falls out of equilibrium and forms a glass, demonstrating that the method requires neither equilibrium nor constant volume conditions to work, in contrast to existing methods. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Comments: 11 pages, 5 figures

Coherent Interactions Between Silicon-Vacancy Centers in Diamond

Authors: Matthew W. Day, Kelsey M. Bates, Christopher L. Smallwood, Rachel C. Owen, Tim Schröder, Edward Bielejec, Ronald Ulbricht, Steven T. Cundiff

Abstract: We report coherent interactions within an ensemble of silicon-vacancy color centers in diamond. The interactions are ascribed to resonant dipole-dipole coupling. Further, we demonstrate control over resonant center pairs by using a driving optical pulse to induce collective, interaction-enabled Rabi-oscillations in the ensemble. Non-resonant center pairs do not undergo collective oscillations. We report coherent interactions within an ensemble of silicon-vacancy color centers in diamond. The interactions are ascribed to resonant dipole-dipole coupling. Further, we demonstrate control over resonant center pairs by using a driving optical pulse to induce collective, interaction-enabled Rabi-oscillations in the ensemble. Non-resonant center pairs do not undergo collective oscillations. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Large-size sub-keV sensitive germanium detectors for the CONUS experiment

Authors: H. Bonet, A. Bonhomme, C. Buck, K. Fülber, J. Hakenmüller, G. Heusser, T. Hugle, J. B. Legras, M. Lindner, W. Maneschg, V. Marian, T. Rink, T. Schröder, H. Strecker, R. Wink

Abstract: Intense fluxes of reactor antineutrinos offer a unique possibility to probe the fully coherent character of elastic neutrino scattering off atomic nuclei. In this regard, detectors face the challenge to register tiny recoil energies of a few keV at the maximum. The CONUS experiment was installed in 17.1 m distance from the reactor core of the nuclear power plant in Brokdorf, Germany, and was desig… ▽ More Intense fluxes of reactor antineutrinos offer a unique possibility to probe the fully coherent character of elastic neutrino scattering off atomic nuclei. In this regard, detectors face the challenge to register tiny recoil energies of a few keV at the maximum. The CONUS experiment was installed in 17.1 m distance from the reactor core of the nuclear power plant in Brokdorf, Germany, and was designed to detect this neutrino interaction channel by using four 1 kg-sized point contact germanium detectors with sub-keV energy thresholds. This report describes the unique specifications addressed to the design, the research and development, and the final production of these detectors. It demonstrates their excellent electronic performance obtained during commissioning under laboratory conditions as well as during the first two years of operation at the reactor site which started on April 1, 2018. It highlights the long-term stability of different detector parameters and the achieved background levels of the germanium detectors inside the CONUS shield setup. △ Less

Submitted 8 April, 2021; v1 submitted 21 October, 2020; originally announced October 2020.

Comments: (18 pages, 12 figures)

Journal ref: Eur. Phys. J. C 81, 267 (2021)

Picosecond time-resolved antibunching measures nanoscale exciton motion, annihilation, and true number of chromophores

Authors: Gordon J. Hedley, Tim Schröder, Florian Steiner, Theresa Eder, Felix Hofmann, Sebastian Bange, Dirk Laux, Sigurd Höger, Philip Tinnefeld, John M. Lupton, Jan Vogelsang

Abstract: The particle-like nature of light becomes evident in the photon statistics of fluorescence of single quantum systems as photon antibunching. In multichromophoric systems, exciton diffusion and subsequent annihilation occurs. These processes also yield photon antibunching but cannot be interpreted reliably. Here, we develop picosecond time-resolved antibunching (psTRAB) to identify and decode such… ▽ More The particle-like nature of light becomes evident in the photon statistics of fluorescence of single quantum systems as photon antibunching. In multichromophoric systems, exciton diffusion and subsequent annihilation occurs. These processes also yield photon antibunching but cannot be interpreted reliably. Here, we develop picosecond time-resolved antibunching (psTRAB) to identify and decode such processes. We use psTRAB to measure the true number of chromophores on well-defined multichromophoric DNA-origami structures, and precisely determine the distance-dependent rates of annihilation between excitons. Further, psTRAB allows us to measure exciton diffusion in mesoscopic H- and J-type conjugated-polymer aggregates. We distinguish between one-dimensional intra-chain and three-dimensional inter-chain exciton diffusion at different times after excitation and determine the disorder-dependent diffusion lengths. Our method provides a new lens through which excitons can be studied at the single-particle level, enabling the rational design of improved excitonic probes such as ultra-bright fluorescent nanoparticles, and materials for optoelectronic devices. △ Less

Submitted 28 September, 2020; originally announced September 2020.

Hidden Silicon-Vacancy Centers in Diamond

Authors: Christopher L. Smallwood, Ronald Ulbricht, Matthew W. Day, Tim Schröder, Kelsey M. Bates, Travis M. Autry, Geoffrey Diederich, Edward Bielejec, Mark E. Siemens, Steven T. Cundiff

Abstract: We characterize a high-density sample of negatively charged silicon-vacancy (SiV$^-$) centers in diamond using collinear optical multidimensional coherent spectroscopy. By comparing the results of complementary signal detection schemes, we identify a hidden population of \ce{SiV^-} centers that is not typically observed in photoluminescence, and which exhibits significant spectral inhomogeneity an… ▽ More We characterize a high-density sample of negatively charged silicon-vacancy (SiV$^-$) centers in diamond using collinear optical multidimensional coherent spectroscopy. By comparing the results of complementary signal detection schemes, we identify a hidden population of \ce{SiV^-} centers that is not typically observed in photoluminescence, and which exhibits significant spectral inhomogeneity and extended electronic $T_2$ times. The phenomenon is likely caused by strain, indicating a potential mechanism for controlling electric coherence in color-center-based quantum devices. △ Less

Submitted 5 May, 2021; v1 submitted 3 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Lett. 126, 213601 (2021)

Powering Electronic Devices from Salt Gradients in AA Battery-Sized Stacks of Hydrogel-Infused Paper

Authors: Anirvan Guha, Trevor J. Kalkus, Thomas B. H. Schroeder, Oliver G. Willis, Michael Mayer

Abstract: Strongly electric fish use gradients of ions within their bodies to generate stunning external electrical discharges; the most powerful of these organisms, the Atlantic torpedo ray, can produce pulses of over 1 kW from its electric organs. Despite extensive study of this phenomenon in nature, the development of artificial power generation schemes based on ion gradients for portable, wearable, or i… ▽ More Strongly electric fish use gradients of ions within their bodies to generate stunning external electrical discharges; the most powerful of these organisms, the Atlantic torpedo ray, can produce pulses of over 1 kW from its electric organs. Despite extensive study of this phenomenon in nature, the development of artificial power generation schemes based on ion gradients for portable, wearable, or implantable human use has remained out of reach. Previously, inspired by the electric eel, we developed an artificial electric organ that generated electricity from ion gradients within stacked hydrogels and, like the eel, was optimized to deliver large voltages that exceeded 100 V. Due to its high internal resistance, the current of this power source was, however, too low to power standard electronics. Here we introduce an artificial electric organ that takes inspiration from the unique morphologies of torpedo rays for maximal current output. This power source uses a hybrid material of hydrogel-infused paper to create, organize, and reconfigure stacks of thin, arbitrarily large gel films both in series and in parallel. The resulting increase in electrical power by almost two orders of magnitude compared to the original eel-inspired design makes it possible to power electronic devices and establishes that biology's mechanism of generating significant electrical power can now be realized from benign and soft materials in a portable size. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Comments: 34 pages, 10 figures, 1 table

Technical Design Report for the PANDA Endcap Disc DIRC

Authors: Panda Collaboration, F. Davi, W. Erni, B. Krusche, M. Steinacher, N. Walford, H. Liu, Z. Liu, B. Liu, X. Shen, C. Wang, J. Zhao, M. Albrecht, T. Erlen, F. Feldbauer, M. Fink, V. Freudenreich, M. Fritsch, F. H. Heinsius, T. Held, T. Holtmann, I. Keshk, H. Koch, B. Kopf, M. Kuhlmann , et al. (441 additional authors not shown)

Abstract: PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c.… ▽ More PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c. PANDA is designed to reach a maximum luminosity of 2x10^32 cm^2 s. Most of the physics programs require an excellent particle identification (PID). The PID of hadronic states at the forward endcap of the target spectrometer will be done by a fast and compact Cherenkov detector that uses the detection of internally reflected Cherenkov light (DIRC) principle. It is designed to cover the polar angle range from 5° to 22° and to provide a separation power for the separation of charged pions and kaons up to 3 standard deviations (s.d.) for particle momenta up to 4 GeV/c in order to cover the important particle phase space. This document describes the technical design and the expected performance of the novel PANDA Disc DIRC detector that has not been used in any other high energy physics experiment (HEP) before. The performance has been studied with Monte-Carlo simulations and various beam tests at DESY and CERN. The final design meets all PANDA requirements and guarantees suffcient safety margins. △ Less

Submitted 29 December, 2019; originally announced December 2019.

Comments: TDR for Panda/Fair to be published

Interchromophoric Interactions Determine the Maximum Brightness Density in DNA Origami Structures

Authors: Tim Schröder, Max B. Scheible, Florian Steiner, Jan Vogelsang, Philip Tinnefeld

Abstract: An ideal point light source is as small and as bright as possible. For fluorescent point light sources, homogeneity of the light sources is important as well as that the fluorescent units inside the light source maintain their photophysical properties which is compromised by dye aggregation. Here we propose DNA origami as a rigid scaffold to arrange dye molecules in a dense pixel array with high c… ▽ More An ideal point light source is as small and as bright as possible. For fluorescent point light sources, homogeneity of the light sources is important as well as that the fluorescent units inside the light source maintain their photophysical properties which is compromised by dye aggregation. Here we propose DNA origami as a rigid scaffold to arrange dye molecules in a dense pixel array with high control of stoichiometry and dye-dye interactions. In order to find the highest labeling density in a DNA origami structure without influencing dye photophysics we alter the distance of two ATTO647N dyes in single base pair steps and probe the dye-dye interactions on the single-molecule level. For small distances strong quenching in terms of intensity and fluorescence lifetime is observed. With increasing distance, we observe reduced quenching and molecular dynamics. However, energy transfer processes in the weak coupling regime still have a significant impact and can lead to quenching by singlet-dark-state-annihilation. Our study fills a gap of studying the interactions of dyes relevant for superresolution microscopy with dense labeling and for single-molecule biophysics. Incorporating these findings in a 3D DNA origami object will pave the way to bright and homogeneous DNA origami nanobeads. △ Less

Submitted 11 December, 2019; originally announced December 2019.

Deterministic positioning of nanophotonic waveguides around single self-assembled quantum dots

Authors: Tommaso Pregnolato, Xiao-Liu Chu, Tim Schröder, Rüdiger Schott, Andreas D. Wieck, Arne Ludwig, Peter Lodahl, Nir Rotenberg

Abstract: The capability to embed self-assembled quantum dots (QDs) at predefined positions in nanophotonic structures is key to the development of complex quantum photonic architectures. Here, we demonstrate that QDs can be deterministically positioned in nanophotonic waveguides by pre-locating QDs relative to a global reference frame using micro-photoluminescence ($μ$PL) spectroscopy. After nanofabricatio… ▽ More The capability to embed self-assembled quantum dots (QDs) at predefined positions in nanophotonic structures is key to the development of complex quantum photonic architectures. Here, we demonstrate that QDs can be deterministically positioned in nanophotonic waveguides by pre-locating QDs relative to a global reference frame using micro-photoluminescence ($μ$PL) spectroscopy. After nanofabrication, $μ$PL images reveal misalignments between the central axis of the waveguide and the embedded QD of only $(9\pm46$) nm and $(1\pm33$) nm, for QDs embedded in undoped and doped membranes, respectively. A priori knowledge of the QD positions allows us to study the spectral changes introduced by nanofabrication. We record average spectral shifts ranging from 0.1 to 1.1 nm, indicating that the fabrication-induced shifts can generally be compensated by electrical or thermal tuning of the QDs. Finally, we quantify the effects of the nanofabrication on the polarizability, the permanent dipole moment and the emission frequency at vanishing electric field of different QD charge states, finding that these changes are constant down to QD-surface separations of only 70 nm. Consequently, our approach deterministically integrates QDs into nanophotonic waveguides whose light-fields contain nanoscale structure and whose group index varies at the nanometer level. △ Less

Submitted 3 August, 2020; v1 submitted 2 July, 2019; originally announced July 2019.

Comments: 26 pages, 9 figures. Updated version of the manuscript, with new appendices and new figures

Journal ref: APL Photon. 5, 086101 (2020)

Individual Control and Readout of Qubits in a Sub-Diffraction Volume

Authors: Eric Bersin, Michael Walsh, Sara L. Mouradian, Matthew E. Trusheim, Tim Schröder, Dirk Englund

Abstract: Medium-scale ensembles of coupled qubits offer a platform for near-term quantum technologies including computing, sensing, and the study of mesoscopic quantum systems. Atom-like emitters in solids have emerged as promising quantum memories, with demonstrations of spin-spin entanglement by optical and magnetic interactions. Magnetic coupling in particular is attractive for efficient and determinist… ▽ More Medium-scale ensembles of coupled qubits offer a platform for near-term quantum technologies including computing, sensing, and the study of mesoscopic quantum systems. Atom-like emitters in solids have emerged as promising quantum memories, with demonstrations of spin-spin entanglement by optical and magnetic interactions. Magnetic coupling in particular is attractive for efficient and deterministic entanglement gates, but raises the problem of individual spin addressing at the necessary nanometer-scale separation. Current super-resolution techniques can reach this resolution, but are destructive to the states of nearby qubits. Here, we demonstrate the measurement of individual qubit states in a sub-diffraction cluster by selectively exciting spectrally distinguishable nitrogen vacancy (NV) centers. We demonstrate super-resolution localization of single centers with nanometer spatial resolution, as well as individual control and readout of spin populations. These measurements indicate a readout-induced crosstalk on non-addressed qubits below $4\times10^{-2}$. This approach opens the door to high-speed control and measurement of qubit registers in mesoscopic spin clusters, with applications ranging from entanglement-enhanced sensors to error-corrected qubit registers to multiplexed quantum repeater nodes. △ Less

Submitted 20 August, 2018; v1 submitted 17 May, 2018; originally announced May 2018.

Comments: 7 pages, 4 figures + supplementary information

Spin-photon interface and spin-controlled photon switching in a nanobeam waveguide

Authors: Alisa Javadi, Dapeng Ding, Martin Hayhurst Appel, Sahand Mahmoodian, Matthias C. Löbl, Immo Söllner, Rüdiger Schott, Camille Papon, Tommaso Pregnolato, Søren Stobbe, Leonardo Midolo, Tim Schröder, Andreas D. Wieck, Arne Ludwig, Richard J. Warburton, Peter Lodahl

Abstract: Access to the electron spin is at the heart of many protocols for integrated and distributed quantum-information processing [1-4]. For instance, interfacing the spin-state of an electron and a photon can be utilized to perform quantum gates between photons [2,5] or to entangle remote spin states [6-9]. Ultimately, a quantum network of entangled spins constitutes a new paradigm in quantum optics [1… ▽ More Access to the electron spin is at the heart of many protocols for integrated and distributed quantum-information processing [1-4]. For instance, interfacing the spin-state of an electron and a photon can be utilized to perform quantum gates between photons [2,5] or to entangle remote spin states [6-9]. Ultimately, a quantum network of entangled spins constitutes a new paradigm in quantum optics [1]. Towards this goal, an integrated spin-photon interface would be a major leap forward. Here we demonstrate an efficient and optically programmable interface between the spin of an electron in a quantum dot and photons in a nanophotonic waveguide. The spin can be deterministically prepared with a fidelity of 96\%. Subsequently the system is used to implement a "single-spin photonic switch", where the spin state of the electron directs the flow of photons through the waveguide. The spin-photon interface may enable on-chip photon-photon gates [2], single-photon transistors [10], and efficient photonic cluster state generation [11]. △ Less

Submitted 19 September, 2017; originally announced September 2017.

A bright nanowire single photon source based on SiV centers in diamond

Authors: L. Marseglia, K. Saha, A. Ajoy, T. Schröder, D. Englund, F. Jelezko, R. Walsworth, J. L. Pacheco, D. L. Perry, E. S. Bielejec, P. Cappellaro

Abstract: The practical implementation of many quantum technologies relies on the development of robust and bright single photon sources that operate at room temperature. The negatively charged silicon-vacancy (SiV-) color center in diamond is a possible candidate for such a single photon source. However, due to the high refraction index mismatch to air, color centers in diamond typically exhibit low photon… ▽ More The practical implementation of many quantum technologies relies on the development of robust and bright single photon sources that operate at room temperature. The negatively charged silicon-vacancy (SiV-) color center in diamond is a possible candidate for such a single photon source. However, due to the high refraction index mismatch to air, color centers in diamond typically exhibit low photon out-coupling. An additional shortcoming is due to the random localization of native defects in the diamond sample. Here we demonstrate deterministic implantation of Si ions with high conversion efficiency to single SiV- centers, targeted to fabricated nanowires. The co-localization of single SiV- centers with the nanostructures yields a ten times higher light coupling efficiency than for single SiV- centers in bulk diamond. This enhanced photon out-coupling, together with the intrinsic scalability of the SiV- creation method, enables a new class of devices for integrated photonics and quantum science. △ Less

Submitted 18 August, 2017; originally announced August 2017.

Comments: 15 pages, 5 figures

Rectangular Photonic Crystal Nanobeam Cavities in Bulk Diamond

Authors: Sara Mouradian, Noel H. Wan, Tim Schröder, Dirk Englund

Abstract: We demonstrate the fabrication of photonic crystal nanobeam cavities with rectangular cross section into bulk diamond. In simulation, these cavities have an unloaded quality factor (Q) of over 1 million. Measured cavity resonances show fundamental modes with spectrometer-limited quality factors larger than 14,000 within 1nm of the NV center's zero phonon line at 637nm. We find high cavity yield ac… ▽ More We demonstrate the fabrication of photonic crystal nanobeam cavities with rectangular cross section into bulk diamond. In simulation, these cavities have an unloaded quality factor (Q) of over 1 million. Measured cavity resonances show fundamental modes with spectrometer-limited quality factors larger than 14,000 within 1nm of the NV center's zero phonon line at 637nm. We find high cavity yield across the full diamond chip with deterministic resonance trends across the fabricated parameter sweeps. △ Less

Submitted 25 April, 2017; originally announced April 2017.

Scalable Focused Ion Beam Creation of Nearly Lifetime-Limited Single Quantum Emitters in Diamond Nanostructures

Authors: Tim Schröder, Matthew E. Trusheim, Michael Walsh, Luozhou Li, Jiabao Zheng, Marco Schukraft, Jose L. Pacheco, Ryan M. Camacho, Edward S. Bielejec, Alp Sipahigil, Ruffin E. Evans, Denis D. Sukachev, Christian T. Nguyen, Mikhail D. Lukin, Dirk Englund

Abstract: The controlled creation of defect center---nanocavity systems is one of the outstanding challenges for efficiently interfacing spin quantum memories with photons for photon-based entanglement operations in a quantum network. Here, we demonstrate direct, maskless creation of atom-like single silicon-vacancy (SiV) centers in diamond nanostructures via focused ion beam implantation with $\sim 32$ nm… ▽ More The controlled creation of defect center---nanocavity systems is one of the outstanding challenges for efficiently interfacing spin quantum memories with photons for photon-based entanglement operations in a quantum network. Here, we demonstrate direct, maskless creation of atom-like single silicon-vacancy (SiV) centers in diamond nanostructures via focused ion beam implantation with $\sim 32$ nm lateral precision and $< 50$ nm positioning accuracy relative to a nanocavity. Moreover, we determine the Si+ ion to SiV center conversion yield to $\sim 2.5\%$ and observe a 10-fold conversion yield increase by additional electron irradiation. We extract inhomogeneously broadened ensemble emission linewidths of $\sim 51$ GHz, and close to lifetime-limited single-emitter transition linewidths down to $126 \pm13$ MHz corresponding to $\sim 1.4$-times the natural linewidth. This demonstration of deterministic creation of optically coherent solid-state single quantum systems is an important step towards development of scalable quantum optical devices. △ Less

Submitted 29 October, 2016; originally announced October 2016.

Bright Room-Temperature Single Photon Emission from Defects in Gallium Nitride

Authors: Amanuel M. Berhane, Kwang-Yong Jeong, Zoltán Bodrog, Saskia Fiedler, Tim Schröder, Noelia Vico Triviño, Tomás Palacios, Adam Gali, Milos Toth, Dirk Englund, Igor Aharonovich

Abstract: Single photon emitters play a central role in many photonic quantum technologies. A promising class of single photon emitters consists of atomic color centers in wide-bandgap crystals, such as diamond silicon carbide and hexagonal boron nitride. However, it is currently not possible to grow these materials as sub-micron thick films on low-refractive index substrates, which is necessary for mature… ▽ More Single photon emitters play a central role in many photonic quantum technologies. A promising class of single photon emitters consists of atomic color centers in wide-bandgap crystals, such as diamond silicon carbide and hexagonal boron nitride. However, it is currently not possible to grow these materials as sub-micron thick films on low-refractive index substrates, which is necessary for mature photonic integrated circuit technologies. Hence, there is great interest in identifying quantum emitters in technologically mature semiconductors that are compatible with suitable heteroepitaxies. Here, we demonstrate robust single photon emitters based on defects in gallium nitride (GaN), the most established and well understood semiconductor that can emit light over the entire visible spectrum. We show that the emitters have excellent photophysical properties including a brightness in excess of 500x10^3 counts/s. We further show that the emitters can be found in a variety of GaN wafers, thus offering reliable and scalable platform for further technological development. We propose a theoretical model to explain the origin of these emitters based on cubic inclusions in hexagonal gallium nitride. Our results constitute a feasible path to scalable, integrated on-chip quantum technologies based on GaN. △ Less

Submitted 15 October, 2016; originally announced October 2016.

Feasibility study for the measurement of $πN$ TDAs at PANDA in $\bar{p}p\to J/ψπ^0$

Authors: PANDA Collaboration, B. Singh, W. Erni, B. Krusche, M. Steinacher, N. Walford, H. Liu, Z. Liu, B. Liu, X. Shen, C. Wang, J. Zhao, M. Albrecht, T. Erlen, M. Fink, F. H. Heinsius, T. Held, T. Holtmann, S. Jasper, I. Keshk, H. Koch, B. Kopf, M. Kuhlmann, M. Kümmel, S. Leiber , et al. (488 additional authors not shown)

Abstract: The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as… ▽ More The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as well as the background rejection from various sources including the $\bar{p}p\toπ^+π^-π^0$ and $\bar{p}p\to J/ψπ^0π^0$ reactions are performed with PandaRoot, the simulation and analysis software framework of the PANDA experiment. It is shown that the measurement can be done at PANDA with significant constraining power under the assumption of an integrated luminosity attainable in four to five months of data taking at the maximum design luminosity. △ Less

Submitted 7 October, 2016; originally announced October 2016.

Comments: 25 pages, 22 figures

Journal ref: Phys. Rev. D 95, 032003 (2017)

A pair potential that reproduces the shape of isochrones in molecular liquids

Authors: Arno A. Veldhorst, Thomas B. Schrøder, Jeppe C. Dyre

Abstract: Many liquids have curves (isomorphs) in their phase diagrams along which structure, dynamics, and some thermodynamic quantities are invariant in reduced units. A substantial part of their phase diagrams is thus effectively one dimensional. The shape of these isomorphs is described by a material-dependent function of density $h(ρ)$, which for real liquids is well approximated by a power law $ρ^γ$.… ▽ More Many liquids have curves (isomorphs) in their phase diagrams along which structure, dynamics, and some thermodynamic quantities are invariant in reduced units. A substantial part of their phase diagrams is thus effectively one dimensional. The shape of these isomorphs is described by a material-dependent function of density $h(ρ)$, which for real liquids is well approximated by a power law $ρ^γ$. However, in simulations, a power law is not adequate when density changes are large; typical models such as the Lennard-Jones liquid show that $γ(ρ) \equiv \mathrm{d} \ln h(ρ)/\mathrm{d} \ln ρ$ is a decreasing function of density. This paper presents results from computer simulations using a new pair potential that diverges at a nonzero distance and can be tuned to give a more realistic shape of $γ(ρ)$. Our results indicate that the finite size of molecules is an important factor to take into account when modeling liquids over a large density range. △ Less

Submitted 18 August, 2016; v1 submitted 19 April, 2016; originally announced April 2016.

Comments: 5 pages, 4 figures

Journal ref: J. Phys. Chem. B 120, 7970-7974 (2016)

Bright and photostable single-photon emitter in silicon carbide

Authors: Benjamin Lienhard, Tim Schröder, Sara Mouradian, Florian Dolde, Toan Trong Tran, Igor Aharonovich, Dirk R. Englund

Abstract: Single-photon sources are of paramount importance in quantum communication, quantum computation, and quantum metrology. In particular, there is great interest in realizing scalable solid-state platforms that can emit triggered photons on demand to achieve scalable nanophotonic networks. We report on a visible-spectrum single-photon emitter in 4H silicon carbide (SiC). The emitter is photostable at… ▽ More Single-photon sources are of paramount importance in quantum communication, quantum computation, and quantum metrology. In particular, there is great interest in realizing scalable solid-state platforms that can emit triggered photons on demand to achieve scalable nanophotonic networks. We report on a visible-spectrum single-photon emitter in 4H silicon carbide (SiC). The emitter is photostable at room and low temperatures, enabling photon counts per second in excess of 2$\times$10$^6$ from unpatterned bulk SiC. It exists in two orthogonally polarized states, which have parallel absorption and emission dipole orientations. Low-temperature measurements reveal a narrow zero phonon line (linewidth $<0.1~$nm) that accounts for $>30$% of the total photoluminescence spectrum. △ Less

Submitted 24 February, 2021; v1 submitted 17 March, 2016; originally announced March 2016.

Journal ref: Optica 3, 768-774 (2016)

Review Article: Quantum Nanophotonics in Diamond

Authors: Tim Schröder, Sara Mouradian, Jiabao Zheng, Matthew E. Trusheim, Michael Walsh, Edward H. Chen, Luozhou Li, Igal Bayn, Dirk Englund

Abstract: The past decade has seen great advances in develo** color centers in diamond for sensing, quantum information processing, and tests of quantum foundations. Increasingly, the success of these applications as well as fundamental investigations of light-matter interaction depend on improved control of optical interactions with color centers -- from better fluorescence collection to efficient and pr… ▽ More The past decade has seen great advances in develo** color centers in diamond for sensing, quantum information processing, and tests of quantum foundations. Increasingly, the success of these applications as well as fundamental investigations of light-matter interaction depend on improved control of optical interactions with color centers -- from better fluorescence collection to efficient and precise coupling with confined single optical modes. Wide ranging research efforts have been undertaken to address these demands through advanced nanofabrication of diamond. This review will cover recent advances in diamond nano- and microphotonic structures for efficient light collection, color center to nanocavity coupling, hybrid integration of diamond devices with other material systems, and the wide range of fabrication methods that have enabled these complex photonic diamond systems. △ Less

Submitted 16 March, 2016; originally announced March 2016.

CASCADE - a multi-layer Boron-10 neutron detection system

Authors: M. Köhli, M. Klein, F. Allmendinger, A. -K. Perrevoort, T. Schröder, N. Martin, C. J. Schmidt, U. Schmidt

Abstract: The globally increased demand for helium-3 along with the limited availability of this gas calls for the development of alternative technologies for the large ESS instrumentation pool. We report on the CASCADE Project - a novel detection system, which has been developed for the purposes of neutron spin echo spectroscopy. It features 2D spatially resolved detection of thermal neutrons at high rates… ▽ More The globally increased demand for helium-3 along with the limited availability of this gas calls for the development of alternative technologies for the large ESS instrumentation pool. We report on the CASCADE Project - a novel detection system, which has been developed for the purposes of neutron spin echo spectroscopy. It features 2D spatially resolved detection of thermal neutrons at high rates. The CASCADE detector is composed of a stack of solid boron-10 coated Gas Electron Multiplier foils, which serve both as a neutron converter and as an amplifier for the primary ionization deposited in the standard Argon-CO2 counting gas environment. This multi-layer setup efficiently increases the detection efficiency and serves as a helium-3 alternative. It has furthermore been possible to extract the signal of the charge traversing the stack to identify the very thin conversion layer of about 1 micrometer. This allows the precise determination of the time-of-flight, necessary for the application in MIEZE spin echo techniques. △ Less

Submitted 12 February, 2016; originally announced February 2016.

Comments: 8 pages, 11 figures. Submitted for publication in Journal of Physics: Conference Series, Proceedings of the European Conference on Neutron Scattering (ECNS2015)

Scaling of the dynamics of flexible Lennard-Jones chains. II. Effects of harmonic bonds

Authors: Arno A. Veldhorst, Jeppe C. Dyre, Thomas B. Schrøder

Abstract: The previous paper [Veldhorst et al., J. Chem. Phys. 141, 054904 (2014)] demonstrated that the isomorph theory explains the scaling properties of a liquid of flexible chains consisting of ten Lennard-Jones particles connected by rigid bonds. We here investigate the same model with harmonic bonds. The introduction of harmonic bonds almost completely destroys the correlations in the equilibrium fluc… ▽ More The previous paper [Veldhorst et al., J. Chem. Phys. 141, 054904 (2014)] demonstrated that the isomorph theory explains the scaling properties of a liquid of flexible chains consisting of ten Lennard-Jones particles connected by rigid bonds. We here investigate the same model with harmonic bonds. The introduction of harmonic bonds almost completely destroys the correlations in the equilibrium fluctuations of the potential energy and the virial. According to the isomorph theory, if these correlations are strong a system has isomorphs, curves in the phase diagram along which structure, dynamics and the excess entropy are invariant. The Lennard-Jones chain liquid with harmonic bonds does have curves in the phase diagram along which the structure and dynamics are invariant. The excess entropy is not invariant on these curves, which we refer to as "pseudoisomorphs". In particular this means that Rosenfeld's excess-entropy scaling (the dynamics being a function of excess entropy only) does not apply for the Lennard-Jones chain with harmonic bonds. △ Less

Submitted 9 November, 2015; v1 submitted 19 August, 2015; originally announced August 2015.

Comments: 11 pages, 11 figures

Journal ref: J. Chem. Phys. 143, 194503 (2015)

RUMD: A general purpose molecular dynamics package optimized to utilize GPU hardware down to a few thousand particles

Authors: Nicholas P. Bailey, Trond S. Ingebrigtsen, Jesper Schmidt Hansen, Arno A. Veldhorst, Lasse Bøhling, Claire A. Lemarchand, Andreas E. Olsen, Andreas K. Bacher, Lorenzo Costigliola, Ulf R. Pedersen, Heine Larsen, Jeppe C. Dyre, Thomas B. Schrøder

Abstract: RUMD is a general purpose, high-performance molecular dynamics (MD) simulation package running on graphical processing units (GPU's). RUMD addresses the challenge of utilizing the many-core nature of modern GPU hardware when simulating small to medium system sizes (roughly from a few thousand up to hundred thousand particles). It has a performance that is comparable to other GPU-MD codes at large… ▽ More RUMD is a general purpose, high-performance molecular dynamics (MD) simulation package running on graphical processing units (GPU's). RUMD addresses the challenge of utilizing the many-core nature of modern GPU hardware when simulating small to medium system sizes (roughly from a few thousand up to hundred thousand particles). It has a performance that is comparable to other GPU-MD codes at large system sizes and substantially better at smaller sizes.RUMD is open-source and consists of a library written in C++ and the CUDA extension to C, an easy-to-use Python interface, and a set of tools for set-up and post-simulation data analysis. The paper describes RUMD's main features, optimizations and performance benchmarks. △ Less

Submitted 14 November, 2017; v1 submitted 16 June, 2015; originally announced June 2015.

Comments: 22 pages. Resubmission to SciPost Physics

Journal ref: SciPost Phys. 3, 038 (2017)

Invariants in the Yukawa system's thermodynamic phase diagram

Authors: Arno A. Veldhorst, Thomas B. Schrøder, Jeppe C. Dyre

Abstract: This paper shows that several known properties of the Yukawa system can be derived from the isomorph theory, which applies to any system that has strong correlations between its virial and potential-energy equilibrium fluctuations. Such "Roskilde-simple" systems have a simplified thermodynamic phase diagram deriving from the fact that they have curves (isomorphs) along which structure and dynamics… ▽ More This paper shows that several known properties of the Yukawa system can be derived from the isomorph theory, which applies to any system that has strong correlations between its virial and potential-energy equilibrium fluctuations. Such "Roskilde-simple" systems have a simplified thermodynamic phase diagram deriving from the fact that they have curves (isomorphs) along which structure and dynamics in reduced units are invariant to a good approximation. We show that the Yukawa system has strong virial potential-energy correlations and identify its isomorphs by two different methods. One method, the so-called direct isomorph check, identifies isomorphs numerically from jumps of relatively small density changes (here 10%). The second method identifies isomorphs analytically from the pair potential. The curves obtained by the two methods are close to each other; these curves are confirmed to be isomorphs by demonstrating the invariance of the radial distribution function, the static structure factor, the mean-square displacement as a function of time, and the incoherent intermediate scattering function. Since the melting line is predicted to be an isomorph, the theory provides a derivation of a known approximate analytical expression for this line in the temperature-density phase diagram. The paper's results give the first demonstration that the isomorph theory can be applied to systems like dense colloidal suspensions and strongly coupled dusty plasmas. △ Less

Submitted 30 June, 2015; v1 submitted 25 May, 2015; originally announced May 2015.

Comments: 12 pages, 12 figures

Journal ref: Phys. Plasmas 22, 073705 (2015)

Explaining why simple liquids are quasi-universal

Authors: Andreas K. Bacher, Thomas B. Schrøder, Jeppe C. Dyre

Abstract: It has been known for a long time that many simple liquids have surprisingly similar structure as quantified, e.g., by the radial distribution function. A much more recent realization is that the dynamics are also very similar for a number of systems with quite different pair potentials. Systems with such non-trivial similarities are generally referred to as "quasi-universal". From the fact that t… ▽ More It has been known for a long time that many simple liquids have surprisingly similar structure as quantified, e.g., by the radial distribution function. A much more recent realization is that the dynamics are also very similar for a number of systems with quite different pair potentials. Systems with such non-trivial similarities are generally referred to as "quasi-universal". From the fact that the exponentially repulsive pair potential has strong virial potential-energy correlations in the low-temperature part of its thermodynamic phase diagram, we here show that a liquid is quasi-universal if its pair potential can be written approximately as a sum of exponential terms with numerically large prefactors. Based on evidence from the literature we moreover conjecture the converse, i.e., that quasi-universality only applies for systems with this property. △ Less

Submitted 15 May, 2015; originally announced May 2015.

Journal ref: Nat. Commun. 5, 5424 (2014)

Efficient Photon Coupling from a Diamond Nitrogen Vacancy Centre by Integration with Silica Fibre

Authors: Rishi N. Patel, Tim Schröder, Noel Wan, Luozhou Li, Sara L. Mouradian, Edward H. Chen, Dirk R. Englund

Abstract: A central goal in quantum information science is to efficiently interface photons with single optical modes for quantum networking and distributed quantum computing. Here, we introduce and experimentally demonstrate a compact and efficient method for the low-loss coupling of a solid-state qubit, the nitrogen vacancy (NV) centre in diamond, with a single-mode optical fibre. In this approach, single… ▽ More A central goal in quantum information science is to efficiently interface photons with single optical modes for quantum networking and distributed quantum computing. Here, we introduce and experimentally demonstrate a compact and efficient method for the low-loss coupling of a solid-state qubit, the nitrogen vacancy (NV) centre in diamond, with a single-mode optical fibre. In this approach, single-mode tapered diamond waveguides containing exactly one high quality NV memory are selected and integrated on tapered silica fibres. Numerical optimization of an adiabatic coupler indicates that near-unity-efficiency photon transfer is possible between the two modes. Experimentally, we find an overall collection efficiency between 18-40 % and observe a raw single photon count rate above 700 kHz. This integrated system enables robust, alignment-free, and efficient interfacing of single-mode optical fibres with single photon emitters and quantum memories in solids. △ Less

Submitted 27 February, 2015; originally announced February 2015.

Fabrication of Triangular Nanobeam Waveguide Networks in Bulk diamond Using Single-Crystal Silicon Hard Masks

Authors: I. Bayn, S. Mouradian, L. Li, J. A. Goldstein, T. Schröder, J. Zhang, E. H. Chen, O. Gaathon, M. Lu, A. Stein, C. A. Ruggiero, J. Salzman, R. Kalish, D. Englund

Abstract: A scalable approach for integrated photonic networks in single-crystal diamond using triangular etching of bulk samples is presented. We describe designs of high quality factor (Q=2.51x10^6) photonic crystal cavities with low mode volume (Vm=1.062x(λ/n)^3), which are connected via waveguides supported by suspension structures with predicted transmission loss of only 0.05 dB. We demonstrate the fab… ▽ More A scalable approach for integrated photonic networks in single-crystal diamond using triangular etching of bulk samples is presented. We describe designs of high quality factor (Q=2.51x10^6) photonic crystal cavities with low mode volume (Vm=1.062x(λ/n)^3), which are connected via waveguides supported by suspension structures with predicted transmission loss of only 0.05 dB. We demonstrate the fabrication of these structures using transferred single-crystal silicon hard masks and angular dry etching, yielding photonic crystal cavities in the visible spectrum with measured quality factors in excess of Q=3x103. △ Less

Submitted 13 November, 2014; originally announced November 2014.

Comments: This article will be published in Applied Physics Letters

Scalable integration of long-lived quantum memories into a photonic circuit

Authors: Sara L. Mouradian, Tim Schröder, Carl B. Poitras, Luozhou Li, Jordan Goldstein, Edward H. Chen, Jaime Cardenas, Matthew L. Markham, Daniel J. Twitchen, Michal Lipson, Dirk Englund

Abstract: We demonstrate a photonic circuit with integrated long-lived quantum memories. Pre-selected quantum nodes - diamond micro-waveguides containing single, stable, and negatively charged nitrogen vacancy centers - are deterministically integrated into low-loss silicon nitride waveguides. Each quantum memory node efficiently couples into the single-mode waveguide (> 1 Mcps collected into the waveguide)… ▽ More We demonstrate a photonic circuit with integrated long-lived quantum memories. Pre-selected quantum nodes - diamond micro-waveguides containing single, stable, and negatively charged nitrogen vacancy centers - are deterministically integrated into low-loss silicon nitride waveguides. Each quantum memory node efficiently couples into the single-mode waveguide (> 1 Mcps collected into the waveguide) and exhibits long spin coherence times of up to 120 μs. Our system facilitates the assembly of multiple quantum memories into a photonic integrated circuit with near unity yield, paving the way towards scalable quantum information processing. △ Less

Submitted 24 November, 2014; v1 submitted 28 September, 2014; originally announced September 2014.

Comments: 5 pages, 4 figures

Three megahertz photon collection rate from an NV center with millisecond spin coherence

Authors: Luozhou Li, Edward H. Chen, Jiabao Zheng, Sara L. Mouradian, Florian Dolde, Tim Schröder, Sinan Karaveli, Matthew L. Markham, Daniel J. Twitchen, Dirk Englund

Abstract: Efficient collection of the broadband fluorescence of the diamond nitrogen vacancy center is essential for a range of applications in sensing, on-demand single photon generation, and quantum information processing. Here, we introduce a circular `bullseye' diamond grating enabling a collected photon rate of $(3.0\pm0.1)\times10^6$ counts per second from a single nitrogen-vacancy center with a spin… ▽ More Efficient collection of the broadband fluorescence of the diamond nitrogen vacancy center is essential for a range of applications in sensing, on-demand single photon generation, and quantum information processing. Here, we introduce a circular `bullseye' diamond grating enabling a collected photon rate of $(3.0\pm0.1)\times10^6$ counts per second from a single nitrogen-vacancy center with a spin coherence time of 1.7$\pm$0.1 ms. Back-focal-plane studies indicate efficient redistribution into low-NA modes. △ Less

Submitted 10 September, 2014; originally announced September 2014.

Comments: 6 pages, 9 figures

Coherent spin control of a nanocavity-enhanced qubit in diamond

Authors: Luozhou Li, Tim Schröder, Edward H. Chen, Michael Walsh, Igal Bayn, Jordan Goldstein, Ophir Gaathon, Matthew E. Trusheim, Ming Lu, Jacob Mower, Mircea Cotlet, Matthew L. Markham, Daniel J. Twitchen, Dirk Englund

Abstract: A central aim of quantum information processing is the efficient entanglement of multiple stationary quantum memories via photons. Among solid-state systems, the nitrogen-vacancy (NV) centre in diamond has emerged as an excellent optically addressable memory with second-scale electron spin coherence times. Recently, quantum entanglement and teleportation have been shown between two NV-memories, bu… ▽ More A central aim of quantum information processing is the efficient entanglement of multiple stationary quantum memories via photons. Among solid-state systems, the nitrogen-vacancy (NV) centre in diamond has emerged as an excellent optically addressable memory with second-scale electron spin coherence times. Recently, quantum entanglement and teleportation have been shown between two NV-memories, but scaling to larger networks requires more efficient spin-photon interfaces such as optical resonators. Here, we demonstrate such NV-nanocavity systems with optical quality factors approaching 10,000 and electron spin coherence times exceeding 200 $μ$s using a silicon hard-mask fabrication process. This spin-photon interface is integrated with on-chip microwave striplines for coherent spin control, providing an efficient quantum memory for quantum networks. △ Less

Submitted 10 September, 2014; v1 submitted 4 September, 2014; originally announced September 2014.

Journal ref: Nat.Comm 6 (2015)

Ultrahigh Resolution Spectroscopy Across the Visible to Infrared Spectrum Using Multi-Mode Interference in a Compact Tapered Fiber

Authors: Noel H. Wan, Fan Meng, Ren-Jye Shiue, Edward H. Chen, Tim Schröder, Dirk Englund

Abstract: Optical spectroscopy is a fundamental tool in numerous areas of science and technology. Much effort has focused on miniaturizing spectrometers, but thus far at the cost of high spectral resolution and broad operating range. Here, we describe a compact spectrometer without this trade-off. The device relies on imaging multi-mode interference from leaky modes along a highly multimode tapered optical… ▽ More Optical spectroscopy is a fundamental tool in numerous areas of science and technology. Much effort has focused on miniaturizing spectrometers, but thus far at the cost of high spectral resolution and broad operating range. Here, we describe a compact spectrometer without this trade-off. The device relies on imaging multi-mode interference from leaky modes along a highly multimode tapered optical fiber, resulting in spectrally distinguishable images that form a basis for reconstructing an incident light spectrum. This tapered fiber multimode interference spectrometer enables the acquisition of broadband spectra in a single camera exposure with a measured resolution of 40 pm in the visible spectrum and 10 pm in the infrared spectrum, which are comparable to the performance of grating spectrometers. Spectroscopy from 500 nm to 1600 nm is demonstrated, though operation across the entire transparency window of silica fibers is possible. Multimode interference spectroscopy of leaky modes is suitable in a variety of device geometries, including planar waveguides in a broad range of transparent materials. We anticipate that this technique will greatly expand the availability of high-performance spectroscopy in a wide range of applications. △ Less

Submitted 24 July, 2014; originally announced July 2014.

Narrow-band single photon emission at room temperature based on a single Nitrogen-vacancy center coupled to an all-fiber-cavity

Authors: Roland Albrecht, Alexander Bommer, Christoph Pauly, Frank Mücklich, Andreas W. Schell, Philip Engel, Tim Schröder, Oliver Benson, Jakob Reichel, Christoph Becher

Abstract: We report the realization of a device based on a single Nitrogen-vacancy (NV) center in diamond coupled to a fiber-cavity for use as single photon source (SPS). The device consists of two concave mirrors each directly fabricated on the facets of two optical fibers and a preselected nanodiamond containing a single NV center deposited onto one of these mirrors. Both, cavity in- and output are direct… ▽ More We report the realization of a device based on a single Nitrogen-vacancy (NV) center in diamond coupled to a fiber-cavity for use as single photon source (SPS). The device consists of two concave mirrors each directly fabricated on the facets of two optical fibers and a preselected nanodiamond containing a single NV center deposited onto one of these mirrors. Both, cavity in- and output are directly fiber-coupled and the emission wavelength is easily tunable by variation of the separation of the two mirrors with a piezo-electric crystal. By coupling to the cavity we achieve an increase of the spectral photon rate density by two orders of magnitude compared to free-space emission of the NV center. With this work we establish a simple all-fiber based SPS with promising prospects for the integration into photonic quantum networks. △ Less

Submitted 22 July, 2014; originally announced July 2014.

Cooee bitumen II: Stability of linear asphaltene nanoaggregates

Authors: Claire A. Lemarchand, Thomas B. Schrøder, Jeppe C. Dyre, Jesper S. Hansen

Abstract: Asphaltene and smaller aromatic molecules tend to form linear nanoaggregates in bitumen.Over the years bitumen undergoes chemical aging and during this process, the size of the nanoaggregate increases. This increase is associated with an increase in viscosity and brittleness of the bitumen, eventually leading to road deterioration. This paper focuses on understanding the mechanisms behind nanoaggr… ▽ More Asphaltene and smaller aromatic molecules tend to form linear nanoaggregates in bitumen.Over the years bitumen undergoes chemical aging and during this process, the size of the nanoaggregate increases. This increase is associated with an increase in viscosity and brittleness of the bitumen, eventually leading to road deterioration. This paper focuses on understanding the mechanisms behind nanoaggregate size and stability. We used molecular dynamics simulations to quantify the probability of having a nanoaggregate of a given size in the stationary regime. To model this complicated behavior, we chose first to consider the simple case where only asphaltene molecules are counted in a nanoaggregate. We used a master equation approach and a related statistical mechanics model. The linear asphaltene nanoaggregates behave as a rigid linear chain. The most complicated case where all aromatic molecules are counted in a nanoaggregate is then discussed. The linear aggregates where all aromatic molecules are counted seem to behave as a flexible linear chain. △ Less

Submitted 4 September, 2014; v1 submitted 29 June, 2014; originally announced June 2014.

Comments: 31 pages, 9 figures

Journal ref: J. Chem. Phys. 141, 144308 (2014)

Broadband Magnetometry and Temperature Sensing with a Light Trap** Diamond Waveguide

Authors: Hannah Clevenson, Matthew E. Trusheim, Tim Schroder, Carson Teale, Danielle Braje, Dirk Englund

Abstract: Solid-state quantum sensors are attracting wide interest because of their exceptional sensitivity at room temperature. In particular, the spin properties of individual nitrogen vacancy (NV) color centers in diamond make it an outstanding nanoscale sensor of magnetic fields, electric fields, and temperature, under ambient conditions. Recent work on ensemble NV-based magnetometers, inertial sensors,… ▽ More Solid-state quantum sensors are attracting wide interest because of their exceptional sensitivity at room temperature. In particular, the spin properties of individual nitrogen vacancy (NV) color centers in diamond make it an outstanding nanoscale sensor of magnetic fields, electric fields, and temperature, under ambient conditions. Recent work on ensemble NV-based magnetometers, inertial sensors, and clocks have employed $N$ unentangled color centers to realize a factor of up to $\sqrt{N}$ improvement in sensitivity. However, to realize fully this signal enhancement, new techniques are required to excite efficiently and to collect fluorescence from large NV ensembles. Here, we introduce a light-trap** diamond waveguide (LTDW) geometry that enables both high fluorescence collection ($\sim20\%$) and efficient pump absorption achieving an effective path length exceeding $1$ meter in a millimeter-sized device. The LTDW enables in excess of $2\%$ conversion efficiency of pump photons into optically detected magnetic resonance (ODMR) fluorescence, a \textit{three orders of magnitude} improvement over previous single-pass geometries. This dramatic enhancement of ODMR signal enables broadband measurements of magnetic field and temperature at less than $1$ Hz, a frequency range inaccessible by dynamical decoupling techniques. We demonstrate $\sim 1~\mbox{nT}/\sqrt{\mbox{Hz}}$ magnetic field sensitivity for $0.1$ Hz to $10$ Hz and a thermal sensitivity of $\sim 400 ~μ\mbox{K}/\sqrt{\mbox{Hz}}$ and estimate a spin projection limit at $\sim 0.36$ fT/$\sqrt{\mbox{Hz}}$ and $\sim 139~\mbox{pK}/\sqrt{\mbox{Hz}}$, respectively. △ Less

Submitted 19 June, 2014; originally announced June 2014.

Comments: 8 pages, 5 figures

Four-component united-atom model of bitumen

Authors: Jesper S. Hansen, Claire A. Lemarchand, Erik Nielsen, Jeppe C. Dyre, Thomas B. Schrøder

Abstract: We propose a four-component molecular model of bitumen. The model includes realistic chemical constituents and introduces a coarse-graining level that suppresses the highest frequency modes. Molecular dynamics simulations of the model are being carried out using Graphic-Processor-Units based software in time spans in order of microseconds, and this enables the study of slow relaxation processes ch… ▽ More We propose a four-component molecular model of bitumen. The model includes realistic chemical constituents and introduces a coarse-graining level that suppresses the highest frequency modes. Molecular dynamics simulations of the model are being carried out using Graphic-Processor-Units based software in time spans in order of microseconds, and this enables the study of slow relaxation processes characterizing bitumen. This paper focuses on the high-temperature dynamics as expressed through the mean-square displacement, the stress autocorrelation function, and rotational relaxation. The diffusivity of the individual molecules changes little as a function of temperature and reveals distinct dynamical time scales as a result of the different constituents in the system. Different time scales are also observed for the rotational relaxation. The stress autocorrelation function features a slow non-exponential decay for all temperatures studied. From the stress autocorrelation function, the shear viscosity and shear modulus are evaluated at the highest temperature, showing a viscous response at frequencies below 100 MHz. The model predictions of viscosity and diffusivities are compared to experimental data, giving reasonable agreement. The model shows that the asphaltene, resin and resinous oil tend to form nano-aggregates. The characteristic dynamical relaxation time of these aggregates is different from the homogeneously distributed parts of the system, leading to strong dynamical heterogeneity. △ Less

Submitted 9 July, 2013; originally announced July 2013.

Comments: 10 pages, 12 figures

Journal ref: J. Chem. Phys. 138 (2013) 094508

COOEE bitumen. Chemical aging

Authors: Claire A. Lemarchand, Thomas B. Schrøder, Jeppe C. Dyre, Jesper S. Hansen

Abstract: We study chemical aging in "COOEE bitumen" using molecular dynamic simulations. This model bitumen is composed of four realistic molecule types: saturated hydrocarbon, resinous oil, resin, and asphaltene. The aging reaction is modelled by the chemical reaction: "2 resins $\rightarrow$ 1 asphaltene". Molecular dynamic simulations of four bitumen compositions, obtained by a repeated application of t… ▽ More We study chemical aging in "COOEE bitumen" using molecular dynamic simulations. This model bitumen is composed of four realistic molecule types: saturated hydrocarbon, resinous oil, resin, and asphaltene. The aging reaction is modelled by the chemical reaction: "2 resins $\rightarrow$ 1 asphaltene". Molecular dynamic simulations of four bitumen compositions, obtained by a repeated application of the aging reaction, are performed. The stress autocorrelation function, the fluid structure, the rotational dynamics of the plane aromatic molecules, and the diffusivity of each molecule, are determined for the four different compositions. The aging reaction causes a significant dynamics slowdown, which is correlated to the aggregation of asphaltene molecules in larger and dynamically slower nanoaggregates. Finally, a detailed description of the role of each molecule types in the aggregation and aging processes is given. △ Less

Submitted 3 September, 2013; v1 submitted 9 July, 2013; originally announced July 2013.

Comments: 36 pages, 15 figures

Journal ref: J.Chem. Phys. 139, 124506 (2013)

Technical Design Report for the: PANDA Micro Vertex Detector

Authors: PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, Q. Wang, H. Xu, M. Albrecht, J. Becker, K. Eickel, F. Feldbauer, M. Fink, P. Friedel, F. H. Heinsius, T. Held, H. Koch, B. Kopf, M. Leyhe, C. Motzko, M. Pelizäus, J. Pychy , et al. (436 additional authors not shown)

Abstract: This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics… ▽ More This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics studies. The route towards realisation of the detector is outlined. △ Less

Submitted 10 August, 2012; v1 submitted 27 July, 2012; originally announced July 2012.

Comments: 189 pages, 225 figures, 41 tables

Ultrafast spectral diffusion measurement on nitrogen vacancy centers in nanodiamonds using correlation interferometry

Authors: Janik Wolters, Nikola Sadzak, Andreas W. Schell, Tim Schröder, Oliver Benson

Abstract: Spectral diffusion is the phenomenon of random jumps in the emission wavelength of narrow lines. This phenomenon is a major hurdle for applications of solid state quantum emitters like quantum dots, molecules or diamond defect centers in an integrated quantum optical technology. Here, we provide further insight into the underlying processes of spectral diffusion of the zero phonon line of single n… ▽ More Spectral diffusion is the phenomenon of random jumps in the emission wavelength of narrow lines. This phenomenon is a major hurdle for applications of solid state quantum emitters like quantum dots, molecules or diamond defect centers in an integrated quantum optical technology. Here, we provide further insight into the underlying processes of spectral diffusion of the zero phonon line of single nitrogen vacancy centers in nanodiamonds by using a novel method based on photon correlation interferometry. The method works although the spectral diffusion rate is several orders of magnitude higher than the photon detection rate and thereby improves the time resolution of previous experiments with nanodiamonds by six orders of magnitude. We study the dependency of the spectral diffusion rate on the excitation power, temperature, and excitation wavelength under off-resonant excitation. Our results suggest a strategy to increase the number of spectrally indistinguishable photons emitted by diamond nanocrystals. △ Less

Submitted 27 November, 2012; v1 submitted 5 June, 2012; originally announced June 2012.

Comments: 5 pages, 4 figures, 1 supplementary

Technical Design Report for the: PANDA Straw Tube Tracker

Authors: PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, Q. Wang, H. Xu, A. Aab, M. Albrecht, J. Becker, A. Csapó, F. Feldbauer, M. Fink, P. Friedel, F. H. Heinsius, T. Held, L. Klask, H. Koch, B. Kopf, S. Leiber, M. Leyhe , et al. (451 additional authors not shown)

Abstract: This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory an… ▽ More This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory and the measurement of the specific energy-loss for a particle identification. Dedicated simulations with full analysis studies of certain proton-antiproton reactions, identified as being benchmark tests for the whole PANDA scientific program, have been performed to test the STT layout and performance. The results are presented, and the time lines to construct the STT are described. △ Less

Submitted 4 June, 2012; v1 submitted 24 May, 2012; originally announced May 2012.

Comments: accepted for publication on EPJA

Journal ref: Eur. Phys. J. A (2013) 49: 25