-
Few-electron highly charged muonic Ar atoms verified by electronic $K$ x rays
Authors:
T. Okumura,
T. Azuma,
D. A. Bennett,
W. B. Doriese,
M. S. Durkin,
J. W. Fowler,
J. D. Gard,
T. Hashimoto,
R. Hayakawa,
Y. Ichinohe,
P. Indelicato,
T. Isobe,
S. Kanda,
D. Kato,
M. Katsuragawa,
N. Kawamura,
Y. Kino,
N. Kominato,
Y. Miyake,
K. M. Morgan,
H. Noda,
G. C. O'Neil,
S. Okada,
K. Okutsu,
N. Paul
, et al. (18 additional authors not shown)
Abstract:
Electronic $K$ x rays emitted by muonic Ar atoms in the gas phase were observed using a superconducting transition-edge-sensor microcalorimeter. The high-precision energy spectra provided a clear signature of the presence of muonic atoms accompanied by a few electrons, which have never been observed before. One-, two-, and three-electron bound, i.e., H-like, He-like, and Li-like, muonic Ar atoms w…
▽ More
Electronic $K$ x rays emitted by muonic Ar atoms in the gas phase were observed using a superconducting transition-edge-sensor microcalorimeter. The high-precision energy spectra provided a clear signature of the presence of muonic atoms accompanied by a few electrons, which have never been observed before. One-, two-, and three-electron bound, i.e., H-like, He-like, and Li-like, muonic Ar atoms were identified from electronic $K$ x rays and hyper-satellite $K$ x rays. These $K$ x rays are emitted after the charge transfer process by the collisions with surrounding Ar atoms. With the aid of theoretical calculations, we confirmed that the peak positions are consistent with the x-ray energies from highly charged Cl ions, and the intensities reflecting deexcitation dynamics were successfully understood by taking into account the interaction between the muon and bound electrons.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Nanoscopic Interfacial Hydrogel Viscoelasticity Revealed from Comparison of Macroscopic and Microscopic Rheology
Authors:
Robert F. Schmidt,
Henrik Kiefer,
Robert Dalgliesh,
Michael Gradzielski,
Roland R. Netz
Abstract:
Deviations between macrorheological and particle-based microrheological measurements are often considered a nuisance and neglected. We study aqueous poly(ethylene oxide) (PEO) hydrogels for varying PEO concentrations and chain lengths that contain microscopic tracer particles and show that these deviations in fact reveal the nanoscopic viscoelastic properties of the particle-hydrogel interface. Ba…
▽ More
Deviations between macrorheological and particle-based microrheological measurements are often considered a nuisance and neglected. We study aqueous poly(ethylene oxide) (PEO) hydrogels for varying PEO concentrations and chain lengths that contain microscopic tracer particles and show that these deviations in fact reveal the nanoscopic viscoelastic properties of the particle-hydrogel interface. Based on the transient Stokes equation, we first demonstrate that the deviations are not due to finite particle radius, compressibility or surface-slip effects. Small-angle neutron scattering rules out hydrogel heterogeneities. Instead, we show that a generalized Stokes-Einstein relation, accounting for a nanoscopic interfacial shell around tracers with viscoelastic properties that significantly deviate from bulk, consistently explains our macrorheological and microrheological measurements. The extracted shell diameter is comparable with the PEO end-to-end distance, indicating the importance of dangling chain ends. Our methodology reveals the nanoscopic interfacial rheology of hydrogels and is generally applicable to different kinds of viscoelastic fluids and particles.
△ Less
Submitted 16 February, 2024; v1 submitted 12 December, 2023;
originally announced December 2023.
-
From 3D to 5D tracking: SMX ASIC-based Double-Sided Micro-Strip detectors for comprehensive space, time, and energy measurements
Authors:
M. Teklishyn,
A. Rodríguez Rodríguez,
K. Agarwal,
M. Bajdel,
L. M. Collazo Sánchez,
U. Frankenfeld,
J. M. Heuser,
J. Lehnert,
S. Mehta,
D. Rodríguez Garcés,
D. A. Ramírez Zaldívar,
C. J. Schmidt,
H. R. Schmidt,
A. Toia
Abstract:
We present the recent development of a lightweight detector capable of accurate spatial, timing, and amplitude resolution of charged particles. The technology is based on double-sided double-metal p+\,--\,n\,--\,n+ micro-strip silicon sensors, ultra-light long aluminum-polyimide micro-cables for the analogue signal transfer, and a custom-developed SMX read-out ASIC capable of measurement of the ti…
▽ More
We present the recent development of a lightweight detector capable of accurate spatial, timing, and amplitude resolution of charged particles. The technology is based on double-sided double-metal p+\,--\,n\,--\,n+ micro-strip silicon sensors, ultra-light long aluminum-polyimide micro-cables for the analogue signal transfer, and a custom-developed SMX read-out ASIC capable of measurement of the time ($Δt \lesssim 5 \,\mathrm{ns}$) and amplitude. Dense detector integration enables a material budget $>0.3\,\% X_0$. A sophisticated powering and grounding scheme keeps the noise under control.
In addition to its primary application in Silicon Tracking System of the future CBM experiment in Darmstadt, our detector will be utilized in other research applications.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
Atomic photoexcitation as a tool for probing purity of twisted light modes
Authors:
R. P. Schmidt,
S. Ramakrishna,
A. A. Peshkov,
N. Huntemann,
E. Peik,
S. Fritzsche,
A. Surzhykov
Abstract:
The twisted light modes used in modern atomic physics experiments can be contaminated by small admixtures of plane wave radiation. Although these admixtures hardly reveal themselves in the beam intensity profile, they may seriously affect the outcome of high precision spectroscopy measurements. In the present study we propose a method for diagnosing such a plane wave contamination, which is based…
▽ More
The twisted light modes used in modern atomic physics experiments can be contaminated by small admixtures of plane wave radiation. Although these admixtures hardly reveal themselves in the beam intensity profile, they may seriously affect the outcome of high precision spectroscopy measurements. In the present study we propose a method for diagnosing such a plane wave contamination, which is based on the analysis of the magnetic sublevel population of atoms or ions interacting with the "twisted + plane wave" radiation. In order to theoretically investigate the sublevel populations, we solve the Liouville-von Neumann equation for the time evolution of atomic density matrix. The proposed method is illustrated for the electric dipole $5s \, {}^{2}\mathrm{S}_{1/2} \, - \, 5p \, {}^{2}\mathrm{P}_{3/2}$ transition in Rb induced by (linearly, radially, or azimuthally polarized) vortex light with just a small contamination. We find that even tiny admixtures of plane wave radiation can lead to remarkable variations in the populations of the ground-state magnetic sublevels. This opens up new opportunities for diagnostics of twisted light in atomic spectroscopy experiments.
△ Less
Submitted 29 January, 2024; v1 submitted 16 October, 2023;
originally announced October 2023.
-
How chromophore labels shape the structure and dynamics of a peptide hydrogel
Authors:
Frederick Heinz,
Jonas Proksch,
Robert F. Schmidt,
Beate Koksch,
Michael Gradzielski,
Bettina G. Keller
Abstract:
Biocompatible and functionalizable hydrogels have a wide range of (potential) medicinal applications. In contrast to conventional hydrogels formed by interconnected or interlocked polymer chains, self-assembled hydrogels form from small building blocks like short peptide chains. This has the advantage that the building blocks can be functionalized separately and then mixed to obtain the desired pr…
▽ More
Biocompatible and functionalizable hydrogels have a wide range of (potential) medicinal applications. In contrast to conventional hydrogels formed by interconnected or interlocked polymer chains, self-assembled hydrogels form from small building blocks like short peptide chains. This has the advantage that the building blocks can be functionalized separately and then mixed to obtain the desired properties. However, the hydrogelation process for these systems, especially those with very low polymer weight percentage (< 1 wt%), is not well understood, and therefore it is hard to predict whether a given molecular building block will self-assemble into a hydrogel. This severely hinders the rational design of self-assembled hydrogels. In this study, we demonstrate the impact of an N-terminal chromophore label amino-benzoic acid on the self-assembly and rheology of hydrogel hFF03 (hydrogelating, fibril forming) using molecular dynamics simulations, which self-assembles into α-helical coiled-coils. We find that the chromophore and even its specific regioisomers have a significant influence on the microscopic structure and dynamics of the self-assembled fibril, and on the macroscopic mechanical properties. This is because the chromophore influences the possible salt-bridges which form and stabilize the fibril formation. Furthermore we find that the solvation shell fibrils by itself cannot explain the viscoelasticity of hFF03 hydrogels. Our atomistic model of the hFF03 fibril formation enables a more rational design of these hydrogels. In particular, altering the N-terminal chromophore emergesas a design strategy to tune the mechanic properties of these self-assembled peptide hydrogels.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Linear rotor in an ideal Bose gas near the threshold for binding
Authors:
Tibor Dome,
Artem G. Volosniev,
Areg Ghazaryan,
Laleh Safari,
Richard Schmidt,
Mikhail Lemeshko
Abstract:
We study a linear rotor in a bosonic bath within the angulon formalism. Our focus is on systems where isotropic or anisotropic impurity-boson interactions support a shallow bound state. To study the fate of the angulon in the vicinity of bound-state formation, we formulate a beyond-linear-coupling angulon Hamiltonian. First, we use it to study attractive, spherically symmetric impurity-boson inter…
▽ More
We study a linear rotor in a bosonic bath within the angulon formalism. Our focus is on systems where isotropic or anisotropic impurity-boson interactions support a shallow bound state. To study the fate of the angulon in the vicinity of bound-state formation, we formulate a beyond-linear-coupling angulon Hamiltonian. First, we use it to study attractive, spherically symmetric impurity-boson interactions for which the linear rotor can be mapped onto a static impurity. The well-known polaron formalism provides an adequate description in this limit. Second, we consider anisotropic potentials, and show that the presence of a shallow bound state with pronounced anisotropic character leads to a many-body instability that washes out the angulon dynamics.
△ Less
Submitted 8 January, 2024; v1 submitted 7 August, 2023;
originally announced August 2023.
-
Accelerator Magnet Development Based on COMB Technology with STAR Wires
Authors:
V. V. Kashikhin,
S. Cohan,
V. Lombardo,
D. Turrioni,
N. Mai,
A. K. Chavda,
U. Sambangi,
S. Korupolu,
J. Peram,
A. Anil,
C. Goel,
J. Sai Sandra,
V. Yerraguravagari,
R. Schmidt,
V. Selvamanickam,
G. Majkic,
E. Galstyan,
K. Selvamanickam
Abstract:
This paper reports progress in the development of COMB magnet technology with STAR wires. A two-layer dipole magnet with 60 mm clear bore has been recently fabricated and tested in liquid nitrogen. The purpose of the test was to determine what kind of critical current degradation occurs in the process of winding the STAR wire into the COMB structure.
This paper reports progress in the development of COMB magnet technology with STAR wires. A two-layer dipole magnet with 60 mm clear bore has been recently fabricated and tested in liquid nitrogen. The purpose of the test was to determine what kind of critical current degradation occurs in the process of winding the STAR wire into the COMB structure.
△ Less
Submitted 7 August, 2023; v1 submitted 24 July, 2023;
originally announced July 2023.
-
Phase diagram for strong-coupling Bose polarons
Authors:
Arthur Christianen,
J. Ignacio Cirac,
Richard Schmidt
Abstract:
Important properties of complex quantum many-body systems and their phase diagrams can often already be inferred from the impurity limit. The Bose polaron problem describing an impurity atom immersed in a Bose-Einstein condensate is a paradigmatic example. One of the most interesting features of this model is the competition between the emergent impurity-mediated attraction between the bosons and…
▽ More
Important properties of complex quantum many-body systems and their phase diagrams can often already be inferred from the impurity limit. The Bose polaron problem describing an impurity atom immersed in a Bose-Einstein condensate is a paradigmatic example. One of the most interesting features of this model is the competition between the emergent impurity-mediated attraction between the bosons and their intrinsic repulsion. The arising higher-order correlations make the physics rich and interesting, but also complex to describe theoretically. To tackle this challenge, we develop a quantum chemistry-inspired computational technique and compare two state-of-the-art variational methods that fully include both the boson-impurity and boson-boson interactions on a non-perturbative level. For a sweep of the boson-impurity interaction strength, we find two regimes of qualitatively different behaviour. If the impurity-mediated interactions overcome the repulsion between the bosons, the polaron becomes unstable due to the formation of large bound clusters. If instead the interboson interactions dominate, the impurity will experience a crossover from a polaron into a small molecule. We achieve a unified understanding incorporating both of these regimes and the transition between them. We show that both the instability and crossover regime can be studied in realistic cold-atom experiments. Moreover, we develop a simple analytical model that allows us to interpret these phenomena in the typical Landau framework of first-order phase transitions that turn second-order at a critical endpoint, revealing a deep connection of the Bose polaron model to both few- and many-body physics.
△ Less
Submitted 15 January, 2024; v1 submitted 15 June, 2023;
originally announced June 2023.
-
Controlled Coherent Coupling in a Quantum Dot Molecule Revealed by Ultrafast Four-Wave Mixing Spectroscopy
Authors:
Daniel Wigger,
Johannes Schall,
Marielle Deconinck,
Nikolai Bart,
Paweł Mrowiński,
Mateusz Krzykowski,
Krzysztof Gawarecki,
Martin von Helversen,
Ronny Schmidt,
Lucas Bremer,
Frederik Bopp,
Dirk Reuter,
Andreas D. Wieck,
Sven Rodt,
Julien Renard,
Gilles Nogues,
Arne Ludwig,
Paweł Machnikowski,
Jonathan J. Finley,
Stephan Reitzenstein,
Jacek Kasprzak
Abstract:
Semiconductor quantum dot molecules are considered as promising candidates for quantum technological applications due to their wide tunability of optical properties and coverage of different energy scales associated with charge and spin physics. While previous works have studied the tunnel-coupling of the different excitonic charge complexes shared by the two quantum dots by conventional optical s…
▽ More
Semiconductor quantum dot molecules are considered as promising candidates for quantum technological applications due to their wide tunability of optical properties and coverage of different energy scales associated with charge and spin physics. While previous works have studied the tunnel-coupling of the different excitonic charge complexes shared by the two quantum dots by conventional optical spectroscopy, we here report on the first demonstration of a coherently controlled inter-dot tunnel-coupling focusing on the quantum coherence of the optically active trion transitions. We employ ultrafast four-wave mixing spectroscopy to resonantly generate a quantum coherence in one trion complex, transfer it to and probe it in another trion configuration. With the help of theoretical modelling on different levels of complexity we give an instructive explanation of the underlying coupling mechanism and dynamical processes.
△ Less
Submitted 20 April, 2023;
originally announced April 2023.
-
A tabletop x-ray tomography instrument for nanometer-scale imaging: demonstration of the 1,000-element transition-edge sensor subarray
Authors:
Paul Szypryt,
Nathan Nakamura,
Daniel T. Becker,
Douglas A. Bennett,
Amber L. Dagel,
W. Bertrand Doriese,
Joseph W. Fowler,
Johnathon D. Gard,
J. Zachariah Harris,
Gene C. Hilton,
Jozsef Imrek,
Edward S. Jimenez,
Kurt W. Larson,
Zachary H. Levine,
John A. B. Mates,
D. McArthur,
Luis Miaja-Avila,
Kelsey M. Morgan,
Galen C. O'Neil,
Nathan J. Ortiz,
Christine G. Pappas,
Daniel R. Schmidt,
Kyle R. Thompson,
Joel N. Ullom,
Leila Vale
, et al. (6 additional authors not shown)
Abstract:
We report on the 1,000-element transition-edge sensor (TES) x-ray spectrometer implementation of the TOMographic Circuit Analysis Tool (TOMCAT). TOMCAT combines a high spatial resolution scanning electron microscope (SEM) with a highly efficient and pixelated TES spectrometer to reconstruct three-dimensional maps of nanoscale integrated circuits (ICs). A 240-pixel prototype spectrometer was recent…
▽ More
We report on the 1,000-element transition-edge sensor (TES) x-ray spectrometer implementation of the TOMographic Circuit Analysis Tool (TOMCAT). TOMCAT combines a high spatial resolution scanning electron microscope (SEM) with a highly efficient and pixelated TES spectrometer to reconstruct three-dimensional maps of nanoscale integrated circuits (ICs). A 240-pixel prototype spectrometer was recently used to reconstruct ICs at the 130 nm technology node, but to increase imaging speed to more practical levels, the detector efficiency needs to be improved. For this reason, we are building a spectrometer that will eventually contain 3,000 TES microcalorimeters read out with microwave superconducting quantum interference device (SQUID) multiplexing, and we currently have commissioned a 1,000 TES subarray. This still represents a significant improvement from the 240-pixel system and allows us to begin characterizing the full spectrometer performance. Of the 992 maximimum available readout channels, we have yielded 818 devices, representing the largest number of TES x-ray microcalorimeters simultaneously read out to date. These microcalorimeters have been optimized for pulse speed rather than purely energy resolution, and we measure a FWHM energy resolution of 14 eV at the 8.0 keV Cu K$α$ line.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Nanoimprint strain-engineering of 2D semiconductors
Authors:
Jannis Bensmann,
Robert Schmidt,
Robert Schneider,
Johannes Kern,
Paul Steeger,
Mohammad Adnan,
Steffen Michaelis de Vasconcellos,
Rudolf Bratschitsch
Abstract:
Mechanical strain is a powerful tool to tune the optical and optoelectronic properties of atomically thin semiconductors. Inhomogeneous strain plays an important role in exciton funneling and the activation of single-photon emitters in 2D materials. Here, we create an inhomogeneous strain profile in a 2D semiconductor on a micrometer scale by a nanoimprint process. We present a nanoimprint setup,…
▽ More
Mechanical strain is a powerful tool to tune the optical and optoelectronic properties of atomically thin semiconductors. Inhomogeneous strain plays an important role in exciton funneling and the activation of single-photon emitters in 2D materials. Here, we create an inhomogeneous strain profile in a 2D semiconductor on a micrometer scale by a nanoimprint process. We present a nanoimprint setup, where a mold is used to apply pressure in a controlled way to a WS2 monolayer on a heated polymer layer. After printing, the strain created in the 2D semiconductor is verified by hyperspectral optical imaging. The developed nanoimprint technique is scalable and could be transferred to commercial nanoimprint machines.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Nanoscale Three-Dimensional Imaging of Integrated Circuits using a Scanning Electron Microscope and Transition-Edge Sensor Spectrometer
Authors:
Nathan Nakamura,
Paul Szypryt,
Amber L. Dagel,
Bradley K. Alpert,
Douglas A. Bennett,
W. Bertrand Doriese,
Malcolm Durkin,
Joseph W. Fowler,
Dylan T. Fox,
Johnathon D. Gard,
Ryan N. Goodner,
J. Zachariah Harris,
Gene C. Hilton,
Edward S. Jimenez,
Burke L. Kernen,
Kurt W. Larson,
Zachary H. Levine,
Daniel McArthur,
Kelsey M. Morgan,
Galen C. O'Neil,
Nathan J. Ortiz,
Christine G. Pappas,
Carl D. Reintsema,
Daniel R. Schmidt,
Peter A. Schultz
, et al. (8 additional authors not shown)
Abstract:
X-ray nanotomography is a powerful tool for the characterization of nanoscale materials and structures, but is difficult to implement due to competing requirements on X-ray flux and spot size. Due to this constraint, state-of-the-art nanotomography is predominantly performed at large synchrotron facilities. We present a laboratory-scale nanotomography instrument that achieves nanoscale spatial res…
▽ More
X-ray nanotomography is a powerful tool for the characterization of nanoscale materials and structures, but is difficult to implement due to competing requirements on X-ray flux and spot size. Due to this constraint, state-of-the-art nanotomography is predominantly performed at large synchrotron facilities. We present a laboratory-scale nanotomography instrument that achieves nanoscale spatial resolution while changing the limitations of conventional tomography tools. The instrument combines the electron beam of a scanning electron microscope (SEM) with the precise, broadband X-ray detection of a superconducting transition-edge sensor (TES) microcalorimeter. The electron beam generates a highly focused X-ray spot in a metal target held micrometers away from the sample of interest, while the TES spectrometer isolates target photons with high signal-to-noise. This combination of a focused X-ray spot, energy-resolved X-ray detection, and unique system geometry enable nanoscale, element-specific X-ray imaging in a compact footprint. The proof-of-concept for this approach to X-ray nanotomography is demonstrated by imaging 160 nm features in three dimensions in 6 layers of a Cu-SiO2 integrated circuit, and a path towards finer resolution and enhanced imaging capabilities is discussed.
△ Less
Submitted 4 March, 2024; v1 submitted 20 December, 2022;
originally announced December 2022.
-
Design of a 3000-pixel transition-edge sensor x-ray spectrometer for microcircuit tomography
Authors:
Paul Szypryt,
Douglas A. Bennett,
William J. Boone,
Amber L. Dagel,
Gabriella Dalton,
W. Bertrand Doriese,
Joseph W. Fowler,
Edward J. Garboczi,
Johnathon D. Gard,
Gene C. Hilton,
Jozsef Imrek,
Edward S. Jimenez,
Vincent Y. Kotsubo,
Kurt Larson,
Zachary H. Levine,
John A. B. Mates,
Daniel McArthur,
Kelsey M. Morgan,
Nathan Nakamura,
Galen C. O'Neil,
Nathan J. Ortiz,
Christine G. Pappas,
Carl D. Reintsema,
Daniel R. Schmidt,
Daniel S. Swetz
, et al. (6 additional authors not shown)
Abstract:
Feature sizes in integrated circuits have decreased substantially over time, and it has become increasingly difficult to three-dimensionally image these complex circuits after fabrication. This can be important for process development, defect analysis, and detection of unexpected structures in externally sourced chips, among other applications. Here, we report on a non-destructive, tabletop approa…
▽ More
Feature sizes in integrated circuits have decreased substantially over time, and it has become increasingly difficult to three-dimensionally image these complex circuits after fabrication. This can be important for process development, defect analysis, and detection of unexpected structures in externally sourced chips, among other applications. Here, we report on a non-destructive, tabletop approach that addresses this imaging problem through x-ray tomography, which we uniquely realize with an instrument that combines a scanning electron microscope (SEM) with a transition-edge sensor (TES) x-ray spectrometer. Our approach uses the highly focused SEM electron beam to generate a small x-ray generation region in a carefully designed target layer that is placed over the sample being tested. With the high collection efficiency and resolving power of a TES spectrometer, we can isolate x-rays generated in the target from background and trace their paths through regions of interest in the sample layers, providing information about the various materials along the x-ray paths through their attenuation functions. We have recently demonstrated our approach using a 240 Mo/Cu bilayer TES prototype instrument on a simplified test sample containing features with sizes of $\sim$1 $μ$m. Currently, we are designing and building a 3000 Mo/Au bilayer TES spectrometer upgrade, which is expected to improve the imaging speed by factor of up to 60 through a combination of increased detector number and detector speed.
△ Less
Submitted 14 December, 2022;
originally announced December 2022.
-
Variational theory of angulons and their rotational spectroscopy
Authors:
Zhongda Zeng,
Enderalp Yakaboylu,
Mikhail Lemeshko,
Tao Shi,
Richard Schmidt
Abstract:
The angulon, a quasiparticle formed by a quantum rotor dressed by the excitations of a many-body bath, can be used to describe an impurity rotating in a fluid or solid environment. Here we propose a coherent state ansatz in the co-rotating frame which provides a comprehensive theoretical description of angulons. We reveal the quasiparticle properties, such as energies, quasiparticle weights and sp…
▽ More
The angulon, a quasiparticle formed by a quantum rotor dressed by the excitations of a many-body bath, can be used to describe an impurity rotating in a fluid or solid environment. Here we propose a coherent state ansatz in the co-rotating frame which provides a comprehensive theoretical description of angulons. We reveal the quasiparticle properties, such as energies, quasiparticle weights and spectral functions, and show that our ansatz yields a persistent decrease in the impurity's rotational constant due to many-body dressing, consistent with experimental observations. From our study, a picture of the angulon emerges as an effective spin interacting with a magnetic field that is self-consistently generated by the molecule's rotation. Moreover, we discuss rotational spectroscopy, which focuses on the response of rotating molecules to a laser perturbation in the linear response regime. Importantly, we take into account initial-state interactions that have been neglected in prior studies and reveal their impact on the excitation spectrum. To examine the angulon instability regime, we use a single-excitation ansatz and obtain results consistent with experiments, in which a broadening of spectral lines is observed while phonon wings remain highly suppressed due to initial-state interactions.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Probing molecular spectral functions and unconventional pairing using Raman spectroscopy
Authors:
Oriana K. Diessel,
Jonas von Milczewski,
Arthur Christianen,
Richard Schmidt
Abstract:
An impurity interacting with an ultracold Fermi gas can form either a polaron state or a dressed molecular state in which the impurity forms a bound state with one gas particle. This molecular state features rich physics, including a first-order transition to the polaron state and a negative effective mass at small interactions. However, these features have remained so far experimentally inaccessi…
▽ More
An impurity interacting with an ultracold Fermi gas can form either a polaron state or a dressed molecular state in which the impurity forms a bound state with one gas particle. This molecular state features rich physics, including a first-order transition to the polaron state and a negative effective mass at small interactions. However, these features have remained so far experimentally inaccessible. In this work we show theoretically how the molecular state can be directly prepared experimentally even in its excited state using state-of-the-art cold atom Raman spectroscopy techniques. Initializing the system in the ultra-strong coupling limit, where the binding energy of the molaron is much larger than the Fermi energy, our protocol maps out the momentum-dependent spectral function of the molecule. Using a diagrammatic approach we furthermore show that the molecular spectral function serves as a direct precursor of the elusive Fulde-Ferell-Larkin-Ovchinnikov phase, which is realized for a finite density of fermionic impurity particles. Our results pave the way to a systematic understanding of how composite particles form in quantum many-body environments and provide a basis to develop new schemes for the observation of exotic phases of quantum many-body systems.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Absolute Energy Measurements with Superconducting Transition-Edge Sensors for Muonic X-ray Spectroscopy at 44 keV
Authors:
Daikang Yan,
Joel C. Weber,
Tejas Guruswamy,
Kelsey M. Morgan,
Galen C. O'Neil,
Abigail L. Wessels,
Douglas A. Bennett,
Christine G. Pappas,
John A. Mates,
Johnathon D. Gard,
Daniel T. Becker,
Joseph W. Fowler,
Daniel S. Swetz,
Daniel R. Schmidt,
Joel N. Ullom,
Takuma Okumura,
Tadaaki Isobe,
Toshiyuki Azuma,
Shinji Okada,
Shinya Yamada,
Tadashi Hashimoto,
Orlando Quaranta,
Antonino Miceli,
Lisa M. Gades,
Umeshkumar M. Patel
, et al. (3 additional authors not shown)
Abstract:
Superconducting transition-edge sensor (TES) microcalorimeters have great utility in x-ray applications owing to their high energy resolution, good collecting efficiency and the feasibility of being multiplexed into large arrays. In this work, we develop hard x-ray TESs to measure the absolute energies of muonic-argon ($μ$-Ar) transition lines around 44 keV and 20 keV. TESs with sidecar absorbers…
▽ More
Superconducting transition-edge sensor (TES) microcalorimeters have great utility in x-ray applications owing to their high energy resolution, good collecting efficiency and the feasibility of being multiplexed into large arrays. In this work, we develop hard x-ray TESs to measure the absolute energies of muonic-argon ($μ$-Ar) transition lines around 44 keV and 20 keV. TESs with sidecar absorbers of different heat capacities were fabricated and characterized for their energy resolution and calibration uncertainty. We achieved ~ 1 eV absolute energy measurement accuracy at 44 keV, and < 12 eV energy resolution at 17.5 keV.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
Resonant and phonon-assisted ultrafast coherent control of a single hBN color center
Authors:
Johann A. Preuß,
Daniel Groll,
Robert Schmidt,
Thilo Hahn,
Paweł Machnikowski,
Rudolf Bratschitsch,
Tilmann Kuhn,
Steffen Michaelis de Vasconcellos,
Daniel Wigger
Abstract:
Single-photon emitters in solid-state systems are important building blocks for scalable quantum technologies. Recently, quantum light emitters have been discovered in the wide-gap van der Waals insulator hBN. These color centers have attracted considerable attention due to their quantum performance at elevated temperatures and wide range of transition energies. Here, we demonstrate coherent state…
▽ More
Single-photon emitters in solid-state systems are important building blocks for scalable quantum technologies. Recently, quantum light emitters have been discovered in the wide-gap van der Waals insulator hBN. These color centers have attracted considerable attention due to their quantum performance at elevated temperatures and wide range of transition energies. Here, we demonstrate coherent state manipulation of a single hBN color center with ultrafast laser pulses and investigate in our joint experiment-theory study the coupling between the electronic system and phonons. We demonstrate that coherent control can not only be performed resonantly on the optical transition giving access to the decoherence but also phonon-assisted, which reveals the internal phonon quantum dynamics. In the case of optical phonons we measure their decoherence, stemming in part from their anharmonic decay. Dephasing induced by the creation of acoustic phonons manifests as a rapid decrease of the coherent control signal when traveling phonon wave packets are emitted. Furthermore, we demonstrate that the quantum superposition between a phonon-assisted process and the resonant excitation causes ultrafast oscillations of the coherent control signal. Our results pave the way for ultrafast phonon quantum state control on the nanoscale and open up a new promising perspective for hybrid quantum technologies.
△ Less
Submitted 10 May, 2022;
originally announced May 2022.
-
Design and fabrication of ridge waveguide-based nanobeam cavities for on-chip single-photon sources
Authors:
Uğur Meriç Gür,
Yuhui Yang,
Johannes Schall,
Ronny Schmidt,
Arsenty Kaganskiy,
Yu**g Wang,
Luca Vannucci,
Michael Mattes,
Samel Arslanagić,
Stephan Reitzenstein,
Niels Gregersen
Abstract:
We report on the design of nanohole/nanobeam cavities in ridge waveguides for on-chip, quantum-dot-based single-photon generation. Our design overcomes limitations of a low-refractive-index-contrast material platform in terms of emitter-mode coupling efficiency and yields an outcoupling efficiency of 0.73 to the output ridge waveguide. Importantly, this high coupling efficiency is combined with br…
▽ More
We report on the design of nanohole/nanobeam cavities in ridge waveguides for on-chip, quantum-dot-based single-photon generation. Our design overcomes limitations of a low-refractive-index-contrast material platform in terms of emitter-mode coupling efficiency and yields an outcoupling efficiency of 0.73 to the output ridge waveguide. Importantly, this high coupling efficiency is combined with broadband operation of 9 nm full-width half-maximum. We provide an explicit design procedure for identifying the optimum geometrical parameters according to the developed design. Besides, we fabricate and optically characterize a proof-of-concept waveguide structure. The results of the microphotoluminescence measurements provide evidence for cavity-enhanced spontaneous emission from the quantum dot, thus supporting the potential of our design for on-chip single-photon sources applications.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
Microwave Assisted Hydrothermal Synthesis of Nanoparticles
Authors:
Rainer Schmidt,
Jesus Prado-Gonjal,
Emilio Moran
Abstract:
The general topic of energy is regarded to be one of the most important areas for any research and development activities at the start of the twentyfirst century. Therefore, large research efforts are already based on or will be targeted on the development of clean fuels to replace fossil fuels, the improvement of the existing resources and the discovery of new sustainable energy resources, the es…
▽ More
The general topic of energy is regarded to be one of the most important areas for any research and development activities at the start of the twentyfirst century. Therefore, large research efforts are already based on or will be targeted on the development of clean fuels to replace fossil fuels, the improvement of the existing resources and the discovery of new sustainable energy resources, the establishment of new efficient ways to store sustainable energy, and the replacement of the existing high energy consuming technologies with the more energy efficient ones. The latter concept has resulted in considerable efforts recently to renovate the conventional synthetic chemical industry by introducing new green chemistry concepts, where the energy requirements for chemical processing or synthesis would be drastically reduced. In this context, a vast amount of novel chemical synthesis techniques have been developed during the last decades. Such innovative techniques include combustion, sol gel and coprecipitation methods, sonochemistry, hydrothermal synthesis, and microwave-assisted techniques. Significant qualitative drawbacks in materials synthesized by such novel ways in terms of crystal quality and physical properties are usually not encountered. In some cases, even quantitative improvements, novel crystal arrangements, and interesting particle shapes can be achieved. The concept of combining several of the recently developed nonconventional and innovative synthesis techniques is an interesting concept to even further reduce the energy requirements and particle sizes as compared to one technique alone. Microwave assisted combustion and sol gel synthesis are now employed frequently, as well as the combination of hydrothermal and microwave assisted synthesis, where the latter technique is the topic of this review.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Impedance spectroscopy: Impedance spectroscopy of nanomaterials
Authors:
Rainer Schmidt
Abstract:
Solid state impedance spectroscopy enables the various contributions to the resistive and capacitive properties of electronically inhomogeneous condensed matter to be deconvoluted and characterized separately. The different contributions arise from electronically distinct areas in the sample, which can in an ideal case be represented each by one standard RC element. In the following, the basic pri…
▽ More
Solid state impedance spectroscopy enables the various contributions to the resistive and capacitive properties of electronically inhomogeneous condensed matter to be deconvoluted and characterized separately. The different contributions arise from electronically distinct areas in the sample, which can in an ideal case be represented each by one standard RC element. In the following, the basic principles of impedance spectroscopy, different types of experimental setups and several examples of experimental impedance data sets from nanostructured materials are reviewed and discussed. The data analysis and equivalent circuit modelling processes which are relevant for the application of this technique to nanomaterials are emphasized. The different dimensions and structure of nanomaterials as compared to macroscopic bulk samples leads to quite different and sometimes more complex data that require detailed analysis and advanced equivalent circuit models.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Study of dust-induced beam losses in the cryogenic arcs of the CERN Large Hadron Collider
Authors:
A. Lechner,
P. Bélanger,
I. Efthymiopoulos,
L. Grob,
B. Lindstrom,
R. Schmidt,
D. Wollmann
Abstract:
The interaction of dust particles with the LHC proton beams accounts for a major fraction of irregular beam loss events observed in LHC physics operation. The events cease after a few beam revolutions because of the expulsion of dust particles from the beam once they become ionized in the transverse beam tails. Despite the transient nature of these events, the resulting beam losses can trigger bea…
▽ More
The interaction of dust particles with the LHC proton beams accounts for a major fraction of irregular beam loss events observed in LHC physics operation. The events cease after a few beam revolutions because of the expulsion of dust particles from the beam once they become ionized in the transverse beam tails. Despite the transient nature of these events, the resulting beam losses can trigger beam aborts or provoke quenches of superconducting magnets. In this paper, we study the characteristics of beam-dust particle interactions in the cryogenic arcs by reconstructing key observables like nuclear collision rates, loss durations and integral losses per event. The study is based on events recorded during 6.5 TeV operation with stored beam intensities of up to $\sim 3\times 10{^{14}}$ protons per beam. We show that inelastic collision rates can reach almost $10^{12}$ collisions per second, resulting in a loss of up to $\sim 1.6\times 10^{8}$ protons per event. We demonstrate that the experimental distributions and their dependence on beam parameters can be described quantitatively by a previously developed simulation model if dust particles are assumed to be attracted by the beam. The latter finding is consistent with recent time profile studies and yields further evidence that dust particles carry a negative charge when entering the beam. We also develop different hypotheses regarding the absence of higher-loss events in the measurements, although such events are theoretically not excluded by the simulation model. The results provide grounds for predicting dust-induced beam losses in presence of higher-intensity beams in future runs of the High-Luminosity LHC.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
Dynamics of atoms within atoms
Authors:
S. Tiwari,
F. Engel,
M. Wagner,
R. Schmidt,
F. Meinert,
S. Wüster
Abstract:
Recent experiments with Bose-Einstein condensates have entered a regime in which thousands of ground-state condensate atoms fill the Rydberg-electron orbit. After the excitation of a single atom into a highly excited Rydberg state, scattering off the Rydberg electron sets ground-state atoms into motion, such that one can study the quantum-many-body dynamics of atoms moving within the Rydberg atom.…
▽ More
Recent experiments with Bose-Einstein condensates have entered a regime in which thousands of ground-state condensate atoms fill the Rydberg-electron orbit. After the excitation of a single atom into a highly excited Rydberg state, scattering off the Rydberg electron sets ground-state atoms into motion, such that one can study the quantum-many-body dynamics of atoms moving within the Rydberg atom. Here we study this many-body dynamics using Gross-Pitaevskii and truncated Wigner theory. Our simulations focus in particular on the scenario of multiple sequential Rydberg excitations on the same Rubidium condensate which has become the standard tool to observe quantum impurity dynamics in Rydberg experiments. We investigate to what extent such experiments can be sensitive to details in the electron-atom interaction potential, such as the rapid radial modulation of the Rydberg molecular potential, or p-wave shape resonance. We demonstrate that both effects are crucial for the initial condensate response within the Rydberg orbit, but become less relevant for the density waves emerging outside the Rydberg excitation region at later times. Finally we explore the local dynamics of condensate heating. We find that it provides only minor corrections to the mean-field dynamics.
△ Less
Submitted 9 November, 2021;
originally announced November 2021.
-
Transition from a polaronic condensate to a degenerate Fermi gas of heteronuclear molecules
Authors:
Marcel Duda,
Xing-Yan Chen,
Andreas Schindewolf,
Roman Bause,
Jonas von Milczewski,
Richard Schmidt,
Immanuel Bloch,
Xin-Yu Luo
Abstract:
The interplay of quantum statistics and interactions in atomic Bose--Fermi mixtures leads to a phase diagram markedly different from pure fermionic or bosonic systems. However, investigating this phase diagram remains challenging when bosons condense. Here, we observe evidence for a quantum phase transition from a polaronic to a molecular phase in a density-matched degenerate Bose--Fermi mixture.…
▽ More
The interplay of quantum statistics and interactions in atomic Bose--Fermi mixtures leads to a phase diagram markedly different from pure fermionic or bosonic systems. However, investigating this phase diagram remains challenging when bosons condense. Here, we observe evidence for a quantum phase transition from a polaronic to a molecular phase in a density-matched degenerate Bose--Fermi mixture. The condensate fraction, representing the order parameter of the transition, is depleted by interactions and the build-up of strong correlations results in the emergence of a molecular Fermi gas. By driving through the transition, we ultimately produce a quantum-degenerate sample of sodium-potassium molecules exhibiting a large molecule-frame dipole moment of 2.7 Debye. The observed phase transition represents a new phenomenon complementary to the paradigmatic BEC-BCS crossover observed in Fermi systems.
△ Less
Submitted 3 December, 2021; v1 submitted 8 November, 2021;
originally announced November 2021.
-
Optical Inspection of the Silicon Micro-strip Sensors for the CBM Experiment employing Artificial Intelligence
Authors:
E. Lavrik,
M. Shiroya,
H. R. Schmidt,
A. Toia,
J. M. Heuser
Abstract:
Optical inspection of 1191 silicon micro-strip sensors was performed using a custom made optical inspection setup, employing a machine-learning based approach for the defect analysis and subsequent quality assurance. Furthermore, metrological control of the sensor's surface was performed. In this manuscript, we present the analysis of various sensor surface defects. Among these are implant breaks,…
▽ More
Optical inspection of 1191 silicon micro-strip sensors was performed using a custom made optical inspection setup, employing a machine-learning based approach for the defect analysis and subsequent quality assurance. Furthermore, metrological control of the sensor's surface was performed. In this manuscript, we present the analysis of various sensor surface defects. Among these are implant breaks, p-stop breaks, aluminium strip opens, aluminium strip shorts, surface scratches, double metallization layer defects, passivation layer defects, bias resistor defects as well as dust particle identification. The defect detection was done using the application of Convolutional Deep Neural Networks (CDNNs). From this, defective strips and defect clusters were identified, as well as a 2D map of the defects using their geometrical positions on the sensor was performed. Based on the total number of defects found on the sensor's surface, a method for the estimation of sensor's overall quality grade and quality score was proposed.
△ Less
Submitted 27 September, 2021; v1 submitted 16 July, 2021;
originally announced July 2021.
-
Disorder in order: Localization without randomness in a cold atom system
Authors:
Félix Rose,
Richard Schmidt
Abstract:
We present a map** between the Edwards model of disorder describing the motion of a single particle subject to randomly-positioned static scatterers and the Bose polaron problem of a light quantum impurity interacting with a Bose-Einstein condensate (BEC) of heavy atoms. The map** offers an experimental setting to investigate the physics of Anderson localization where, by exploiting the quantu…
▽ More
We present a map** between the Edwards model of disorder describing the motion of a single particle subject to randomly-positioned static scatterers and the Bose polaron problem of a light quantum impurity interacting with a Bose-Einstein condensate (BEC) of heavy atoms. The map** offers an experimental setting to investigate the physics of Anderson localization where, by exploiting the quantum nature of the BEC, the time evolution of the quantum impurity emulates the disorder-averaged dynamics of the Edwards model. Valid in any space dimension, the map** can be extended to include interacting particles, arbitrary disorder or confinement, and can be generalized to study many-body localization. Moreover, the corresponding exactly-solvable disorder model offers means to benchmark variational approaches used to study polaron physics. Here, we illustrate the map** by focusing on the case of an impurity interacting with a one-dimensional BEC through a contact interaction. While a simple wave function based on the expansion in the number of bath excitations misses the localization physics entirely, a coherent state Ansatz combined with a canonical transformation captures the physics of disorder and Anderson localization.
△ Less
Submitted 4 February, 2022; v1 submitted 14 July, 2021;
originally announced July 2021.
-
Spark probability measurement of a single mask triple GEM detector
Authors:
S. Chatterjee,
U. Frankenfeld,
C. Garabatos,
J. Hehner,
T. Morhardt,
C. J. Schmidt,
H. R. Schmidt,
C. A. Lymanets,
S. Biswas
Abstract:
Triple Gas Electron Multiplier (GEM) detectors will be used as a tracking device in the first two stations of CBM MUon CHamber (MUCH), where the maximum particle rate is expected to reach ~1 MHz/cm2 for central Au-Au collisions at 8 AGeV. Therefore, the stable operation of the detector is very important. Discharge probability has been measured of a single mask triple GEM detector at the CERN SPS/H…
▽ More
Triple Gas Electron Multiplier (GEM) detectors will be used as a tracking device in the first two stations of CBM MUon CHamber (MUCH), where the maximum particle rate is expected to reach ~1 MHz/cm2 for central Au-Au collisions at 8 AGeV. Therefore, the stable operation of the detector is very important. Discharge probability has been measured of a single mask triple GEM detector at the CERN SPS/H4 beam-line facility with a pion beam of ~150 GeV/c and also in an environment of highly ionizing shower particles. The spark probability as a function of gain has been studied for different particle rates. The details of the experimental setup, method of spark identification and results are presented in this paper.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Functional-renormalization-group approach to strongly coupled Bose-Fermi mixtures in two dimensions
Authors:
Jonas von Milczewski,
Félix Rose,
Richard Schmidt
Abstract:
We study theoretically the phase diagram of strongly coupled two-dimensional Bose-Fermi mixtures interacting with attractive short-range potentials as a function of the particle densities. We focus on the limit where the size of the bound state between a boson and a fermion is small compared to the average interboson separation and develop a functional-renormalization-group approach that accounts…
▽ More
We study theoretically the phase diagram of strongly coupled two-dimensional Bose-Fermi mixtures interacting with attractive short-range potentials as a function of the particle densities. We focus on the limit where the size of the bound state between a boson and a fermion is small compared to the average interboson separation and develop a functional-renormalization-group approach that accounts for the bound-state physics arising from the extended Fröhlich Hamiltonian. By including three-body correlations we are able to reproduce the polaron-to-molecule transition in two-dimensional Fermi gases in the extreme limit of vanishing boson density. We predict frequency- and momentum-resolved spectral functions and study the impact of three-body correlations on quasiparticle properties. At finite boson density, we find that when the bound-state energy exceeds the Fermi energy by a critical value, the fermions and bosons can form a fermionic composite with a well-defined Fermi surface. These composites constitute a Fermi sea of dressed Feshbach molecules in the case of ultracold atoms while in the case of atomically thin semiconductors a trion liquid emerges. As the boson density is increased further, the effective energy gap of the composites decreases, leading to a transition into a strongly correlated phase where polarons are hybridized with molecular degrees of freedom. We highlight the universal connection between two-dimensional semiconductors and ultracold atoms and we discuss perspectives for further exploring the rich structure of strongly coupled Bose-Fermi mixtures in these complementary systems.
△ Less
Submitted 8 March, 2022; v1 submitted 28 April, 2021;
originally announced April 2021.
-
First Measurements of Nuclear Detonation Debris with Decay Energy Spectroscopy
Authors:
Mark P. Croce,
Katrina E. Koehler,
Veronika Mocko,
Andrew S. Hoover,
Stosh A. Kozimor,
Daniel R. Schmidt,
Joel N. Ullom
Abstract:
We report the first isotopic composition measurements of trinitite, nuclear detonation debris from the Trinity test, using the novel forensics technique of decay energy spectroscopy (DES). DES measures the unique total decay energy (Q value) of each alpha-decaying isotope in a small radioactive sample embedded in a microcalorimeter detector. We find that DES can measure the major alpha-decaying is…
▽ More
We report the first isotopic composition measurements of trinitite, nuclear detonation debris from the Trinity test, using the novel forensics technique of decay energy spectroscopy (DES). DES measures the unique total decay energy (Q value) of each alpha-decaying isotope in a small radioactive sample embedded in a microcalorimeter detector. We find that DES can measure the major alpha-decaying isotopes in small particles of trinitite with no dissolution or chemical processing. These first measurements demonstrate the potential of DES to provide a radiometric isotopic characterization method with sensitivity and precision to complement traditional forensics techniques.
△ Less
Submitted 22 March, 2021;
originally announced March 2021.
-
Measurement of Ac227 Impurity in Ac225 using Decay Energy Spectroscopy
Authors:
Aidan D. Tollefson,
Chandler M. Smith,
Matthew H. Carpenter,
Mark P. Croce,
Michael E. Fassbender,
Katrina E. Koehler,
Laura M. Lilley,
Ellen M. O'Brien,
Daniel R. Schmidt,
Benjamin W. Stein,
Joel N. Ullom,
Michael D. Yoho,
David J. Mercer
Abstract:
225Ac is a valuable medical radionuclide for targeted alpha therapy, but 227Ac is an undesirable byproduct of an accelerator-based synthesis method under investigation. Sufficient detector sensitivity is critical for quantifying the trace impurity of 227Ac, with the 227Ac/225Ac activity ratio predicted to be approximately 0.15% by end-of-bombardment (EOB). Superconducting transition edge sensor (T…
▽ More
225Ac is a valuable medical radionuclide for targeted alpha therapy, but 227Ac is an undesirable byproduct of an accelerator-based synthesis method under investigation. Sufficient detector sensitivity is critical for quantifying the trace impurity of 227Ac, with the 227Ac/225Ac activity ratio predicted to be approximately 0.15% by end-of-bombardment (EOB). Superconducting transition edge sensor (TES) microcalorimeters offer high resolution energy spectroscopy using the normal-to-superconducting phase transition to measure small change in temperature. By embedding 225Ac production samples in a gold foil thermally coupled to a TES microcalorimeter we can measure the decay energies of the radionuclides embedded with high resolution and efficiency. This technique, known as decay energy spectroscopy (DES), collapses several peaks from alpha decays into single Q-value peaks. In practice there are more complex factors in the interpretation of data using DES, which we will discuss herein. Using this technique we measured the EOB 227Ac impurity to be (0.142 +/- 0.005)% for a single production sample. This demonstration has shown that DES can distinguish closely related isotopic features and is a useful tool for quantitative measures.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Bright electrically controllable quantum-dot-molecule devices fabricated by in-situ electron-beam lithography
Authors:
Johannes Schall,
Marielle Deconinck,
Nikolai Bart,
Matthias Florian,
Martin von Helversen,
Christian Dangel,
Ronny Schmidt,
Lucas Bremer,
Frederik Bopp,
Isabell Hüllen,
Christopher Gies,
Dirk Reuter,
Andreas D. Wieck,
Sven Rodt,
Jonathan J. Finley,
Frank Jahnke,
Arne Ludwig,
Stephan Reitzenstein
Abstract:
Self-organized semiconductor quantum dots represent almost ideal two-level systems, which have strong potential to applications in photonic quantum technologies. For instance, they can act as emitters in close-to-ideal quantum light sources. Coupled quantum dot systems with significantly increased functionality are potentially of even stronger interest since they can be used to host ultra-stable s…
▽ More
Self-organized semiconductor quantum dots represent almost ideal two-level systems, which have strong potential to applications in photonic quantum technologies. For instance, they can act as emitters in close-to-ideal quantum light sources. Coupled quantum dot systems with significantly increased functionality are potentially of even stronger interest since they can be used to host ultra-stable singlet-triplet spin qubits for efficient spin-photon interfaces and for a deterministic photonic 2D cluster-state generation. We realize an advanced quantum dot molecule (QDM) device and demonstrate excellent optical properties. The device includes electrically controllable QDMs based on stacked quantum dots in a pin-diode structure. The QDMs are deterministically integrated into a photonic structure with a circular Bragg grating using in-situ electron beam lithography. We measure a photon extraction efficiency of up to (24$\pm$4)% in good agreement with numerical simulations. The coupling character of the QDMs is clearly demonstrated by bias voltage dependent spectroscopy that also controls the orbital couplings of the QDMs and their charge state in quantitative agreement with theory. The QDM devices show excellent single-photon emission properties with a multi-photon suppression of $g^{(2)}(0) = (3.9 \pm 0.5) \cdot 10^{-3}$. These metrics make the developed QDM devices attractive building blocks for use in future photonic quantum networks using advanced nanophotonic hardware.
△ Less
Submitted 8 April, 2021; v1 submitted 10 January, 2021;
originally announced January 2021.
-
Progress in the development of TES microcalorimeter detectors suitable for neutrino mass measurement
Authors:
A. Giachero,
B. Alpert,
D. T. Becker,
D. A. Bennett,
M. Borghesi,
M. De Gerone,
M. Faverzani,
M. Fedkevych,
E. Ferri,
G. Gallucci,
J. D. Gard,
F. Gatti,
G. C. Hilton,
J. A. B. Mates,
A. Nucciotti,
G. Pessina,
A. Puiu,
C. D. Reintsema,
D. R. Schmidt,
D. S. Swetz,
J. N. Ullom,
L. R. Vale
Abstract:
The HOLMES experiment will perform a precise calorimetric measurement of the end point of the Electron Capture (EC) decay spectrum of 163Ho in order to extract information on neutrino mass with a sensitivity below 2 eV. In its final configuration, HOLMES will deploy 1000 detectors of low-temperature microcalorimeters with implanted 163Ho nuclei. The baseline sensors for HOLMES are Mo/Cu TESs (Tran…
▽ More
The HOLMES experiment will perform a precise calorimetric measurement of the end point of the Electron Capture (EC) decay spectrum of 163Ho in order to extract information on neutrino mass with a sensitivity below 2 eV. In its final configuration, HOLMES will deploy 1000 detectors of low-temperature microcalorimeters with implanted 163Ho nuclei. The baseline sensors for HOLMES are Mo/Cu TESs (Transition Edge Sensors) on SiNx membrane with gold absorbers. Considering the large number of pixels and an event rate of about 300 Hz/pixel, a large multiplexing factor and a large bandwidth are needed. To fulfill this requirement, HOLMES will exploit recent advances in microwave multiplexing. In this contribution, we present the status of the activities in development, the performances of the developed microwave-multiplexed readout system, and the results obtained with the detectors specifically designed for HOLMES in terms of noise, time, and energy resolutions
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Absolute energies and emission line shapes of the L x-ray transitions of lanthanide metals
Authors:
Joseph W. Fowler,
Galen C. O'Neil,
Bradley K. Alpert,
Douglas A. Bennett,
Ed V. Denison,
W. B. Doriese,
Gene C. Hilton,
Lawrence T. Hudson,
Young-Il Joe,
Kelsey M. Morgan,
Daniel R. Schmidt,
Daniel S. Swetz,
Csilla I. Szabo,
Joel N. Ullom
Abstract:
We use an array of transition-edge sensors, cryogenic microcalorimeters with 4 eV energy resolution, to measure L x-ray emission-line profiles of four elements of the lanthanide series: praseodymium, neodymium, terbium, and holmium. The spectrometer also surveys numerous x-ray standards in order to establish an absolute-energy calibration traceable to the International System of Units for the ener…
▽ More
We use an array of transition-edge sensors, cryogenic microcalorimeters with 4 eV energy resolution, to measure L x-ray emission-line profiles of four elements of the lanthanide series: praseodymium, neodymium, terbium, and holmium. The spectrometer also surveys numerous x-ray standards in order to establish an absolute-energy calibration traceable to the International System of Units for the energy range 4 keV to 10 keV. The new results include emission line profiles for 97 lines, each expressed as a sum of one or more Voigt functions; improved absolute energy uncertainty on 71 of these lines relative to existing reference data; a median uncertainty on the peak energy of 0.24 eV, four to ten times better than the median of prior work; and 6 lines that lack any measured values in existing reference tables. The 97 lines comprise nearly all of the most intense L lines from these elements under broad-band x-ray excitation. The work improves on previous measurements made with a similar cryogenic spectrometer by the use of sensors with better linearity in the absorbed energy and a gold x-ray absorbing layer that has a Gaussian energy-response function. It also employs a novel sample holder that enables rapid switching between science targets and calibration targets with excellent gain balancing. Most of the results for peak energy values shown here should be considered as replacements for the currently tabulated standard reference values, while the line shapes given here represent a significant expansion of the scope of available reference data.
△ Less
Submitted 30 November, 2020;
originally announced December 2020.
-
Ionic polaron in a Bose-Einstein condensate
Authors:
G. E. Astrakharchik,
L. A. Peña Ardila,
R. Schmidt,
K. Jachymski,
A. Negretti
Abstract:
The presence of strong interactions in a many-body quantum system can lead to a variety of exotic effects. Here we show that even in a comparatively simple setup consisting of a charged impurity in a weakly interacting bosonic medium the competition of length scales gives rise to a highly correlated mesoscopic state. Using quantum Monte Carlo simulations, we unravel its vastly different polaronic…
▽ More
The presence of strong interactions in a many-body quantum system can lead to a variety of exotic effects. Here we show that even in a comparatively simple setup consisting of a charged impurity in a weakly interacting bosonic medium the competition of length scales gives rise to a highly correlated mesoscopic state. Using quantum Monte Carlo simulations, we unravel its vastly different polaronic properties compared to neutral quantum impurities. Moreover, we identify a transition between the regime amenable to conventional perturbative treatment in the limit of weak atom-ion interactions and a many-body bound state with vanishing quasi-particle residue composed of hundreds of atoms. In order to analyze the structure of the corresponding states we examine the atom-ion and atom-atom correlation functions which both show nontrivial properties. Our findings are directly relevant to experiments using hybrid atom-ion setups that have recently attained the ultracold regime.
△ Less
Submitted 12 May, 2021; v1 submitted 25 May, 2020;
originally announced May 2020.
-
Improved Plutonium and Americium Photon Branching Ratios from Microcalorimeter Gamma Spectroscopy
Authors:
Michael D. Yoho,
Katrina E. Koehler,
Daniel T. Becker,
Douglas A. Bennett,
Matthew H. Carpenter,
Mark P. Croce,
Johnathon D. Gard,
J. A. Ben Mates,
David J. Mercer,
Nathan J. Ortiz,
Daniel R. Schmidt,
Chandler M. Smith,
Daniel S. Swetz,
Aidan D. Tollefson,
Joel N. Ullom,
Leila R. Vale,
Abigail L. Wessels,
Duc T. Vo
Abstract:
Photon branching ratios are critical input data for activities such as nuclear materials protection and accounting because they allow material compositions to be extracted from measurements of gamma-ray intensities. Uncertainties in these branching ratios are often a limiting source of uncertainty in composition determination. Here, we use high statistics, high resolution (~60-70eV full-width-at-h…
▽ More
Photon branching ratios are critical input data for activities such as nuclear materials protection and accounting because they allow material compositions to be extracted from measurements of gamma-ray intensities. Uncertainties in these branching ratios are often a limiting source of uncertainty in composition determination. Here, we use high statistics, high resolution (~60-70eV full-width-at-half-maximum at 100 keV) gamma-ray spectra acquired using microcalorimeter sensors to substantially reduce the uncertainties for 11 plutonium (238Pu,239Pu,241Pu) and 241Am branching ratios important for material control and accountability and nuclear forensics in the energy range of 125 keV to 208 keV. We show a reduction in uncertainty of over a factor of three for one branching ratio and a factor of 2{3 for four branching ratios.
△ Less
Submitted 22 June, 2020; v1 submitted 20 May, 2020;
originally announced May 2020.
-
A Transition-edge Sensor-based X-ray Spectrometer for the Study of Highly Charged Ions at the National Institute of Standards and Technology Electron Beam Ion Trap
Authors:
P. Szypryt,
G. C. O'Neil,
E. Takacs,
J. N. Tan,
S. W. Buechele,
A. S. Naing,
D. A. Bennett,
W. B. Doriese,
M. Durkin,
J. W. Fowler,
J. D. Gard,
G. C. Hilton,
K. M. Morgan,
C. D. Reintsema,
D. R. Schmidt,
D. S. Swetz,
J. N. Ullom,
Yu. Ralchenko
Abstract:
We report on the design, commissioning, and initial measurements of a Transition-edge Sensor (TES) x-ray spectrometer for the Electron Beam Ion Trap (EBIT) at the National Institute of Standards and Technology (NIST). Over the past few decades, the NIST EBIT has produced numerous studies of highly charged ions in diverse fields such as atomic physics, plasma spectroscopy, and laboratory astrophysi…
▽ More
We report on the design, commissioning, and initial measurements of a Transition-edge Sensor (TES) x-ray spectrometer for the Electron Beam Ion Trap (EBIT) at the National Institute of Standards and Technology (NIST). Over the past few decades, the NIST EBIT has produced numerous studies of highly charged ions in diverse fields such as atomic physics, plasma spectroscopy, and laboratory astrophysics. The newly commissioned NIST EBIT TES Spectrometer (NETS) improves the measurement capabilities of the EBIT through a combination of high x-ray collection efficiency and resolving power. NETS utilizes 192 individual TES x-ray microcalorimeters (166/192 yield) to improve upon the collection area by a factor of ~30 over the 4-pixel neutron transmutation doped germanium-based microcalorimeter spectrometer previously used at the NIST EBIT. The NETS microcalorimeters are optimized for the x-ray energies from roughly 500 eV to 8,000 eV and achieve an energy resolution of 3.7 eV to 5.0 eV over this range, a more modest (<2X) improvement over the previous microcalorimeters. Beyond this energy range NETS can operate with various trade-offs, the most significant of which are reduced efficiency at lower energies and being limited to a subset of the pixels at higher energies. As an initial demonstration of the capabilities of NETS, we measured transitions in He-like and H-like O, Ne, and Ar as well as Ni-like W. We detail the energy calibration and data analysis techniques used to transform detector counts into x-ray spectra, a process that will be the basis for analyzing future data.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
On low-energy tail distortions in the detector responsefunction of x-ray microcalorimeter spectrometers
Authors:
G. C. O'Neil,
P. Szypryt,
E. Takacs,
J. N. Tan,
S. W. Buechele,
A. S. Naing,
Y. I. Joe,
D. Swetz,
D. R. Schmidt,
W. B. Doriese,
J. D. Gard,
C. D. Reintsema,
J. N. Ullom,
J. S. Villarrubia,
Yu. Ralchenko
Abstract:
We use narrow spectral lines from the x-ray spectra of various highlycharged ions to measure low-energy tail-like deviations from a Gaussian responsefunction in a microcalorimter x-ray spectrometer with Au absorbers at energiesfrom 650 eV to 3320 eV. We review the literature on low energy tails in othermicrocalorimter x-ray spectrometers and present a model that explains all thereviewed tail fract…
▽ More
We use narrow spectral lines from the x-ray spectra of various highlycharged ions to measure low-energy tail-like deviations from a Gaussian responsefunction in a microcalorimter x-ray spectrometer with Au absorbers at energiesfrom 650 eV to 3320 eV. We review the literature on low energy tails in othermicrocalorimter x-ray spectrometers and present a model that explains all thereviewed tail fraction measurements. In this model a low energy tail arises fromthe combination of electron escape and energy trap** associated with Bi x-rayabsorbers.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Fast Failures in the LHC and the future High Luminosity LHC*
Authors:
B. Lindstrom,
P. Bélanger,
L. Bortot,
R. Denz,
M. Mentink,
E. Ravaioli,
F. Rodriguez Mateos,
R. Schmidt,
J. Uythoven,
M. Valette,
A. Verweij,
C. Wiesner,
D. Wollmann,
M. Zerlauth
Abstract:
An energy of $362\:\text{MJ}$ is stored in each of the two LHC proton beams for nominal beam parameters. This will be further increased to about $700\:\text{MJ}$ in the future High Luminosity LHC (HL-LHC) and uncontrolled beam losses represent a significant hazard for the integrity and safe operation of the machine. In this paper, a number of failure mechanisms that can lead to a fast increase of…
▽ More
An energy of $362\:\text{MJ}$ is stored in each of the two LHC proton beams for nominal beam parameters. This will be further increased to about $700\:\text{MJ}$ in the future High Luminosity LHC (HL-LHC) and uncontrolled beam losses represent a significant hazard for the integrity and safe operation of the machine. In this paper, a number of failure mechanisms that can lead to a fast increase of beam losses are analyzed. Most critical are failures in the magnet protection system, namely the quench heaters and a novel protection system called Coupling-Loss Induced Quench (CLIQ). An important outcome is that magnet protection has to be evaluated for its impact on the beam and designed accordingly. In particular, CLIQ, which is to protect the new HL-LHC triplet magnets, constitutes the fastest known failure in the LHC if triggered spuriously. A schematic change of CLIQ to mitigate the hazard is presented.
A loss of the Beam-Beam Kick due to the extraction of one beam is another source of beam losses with a fast onset. A significantly stronger impact is expected in the upcoming LHC Run III and HL-LHC as compared to the current LHC, mainly due to the increased bunch intensity. Its criticality and mitigation methods are discussed.
It is shown that symmetric quenches in the superconducting magnets for the final focusing triplet can have a significant impact on the beam on short timescales. The impact on the beam due to failures of the Beam-Beam Compensating Wires as well as coherent excitations by the transverse beam damper are also discussed.
△ Less
Submitted 12 May, 2020; v1 submitted 9 May, 2020;
originally announced May 2020.
-
Vibrational dressing in Kinetically Constrained Rydberg Spin Systems
Authors:
Paolo P. Mazza,
Richard Schmidt,
Igor Lesanovsky
Abstract:
Quantum spin systems with kinetic constraints have become paradigmatic for exploring collective dynamical behaviour in many-body systems. Here we discuss a facilitated spin system which is inspired by recent progress in the realization of Rydberg quantum simulators. This platform allows to control and investigate the interplay between facilitation dynamics and the coupling of spin degrees of freed…
▽ More
Quantum spin systems with kinetic constraints have become paradigmatic for exploring collective dynamical behaviour in many-body systems. Here we discuss a facilitated spin system which is inspired by recent progress in the realization of Rydberg quantum simulators. This platform allows to control and investigate the interplay between facilitation dynamics and the coupling of spin degrees of freedom to lattice vibrations. Develo** a minimal model, we show that this leads to the formation of polaronic quasiparticle excitations which are formed by many-body spin states dressed by phonons. We investigate in detail the properties of these quasiparticles, such as their dispersion relation, effective mass and the quasiparticle weight. Rydberg lattice quantum simulators are particularly suited for studying this phonon-dressed kinetically constrained dynamics as their exaggerated length scales permit the site-resolved monitoring of spin and phonon degrees of freedom.
△ Less
Submitted 20 July, 2020; v1 submitted 28 February, 2020;
originally announced March 2020.
-
Observation of a smooth polaron-molecule transition in a degenerate Fermi gas
Authors:
Gal Ness,
Constantine Shkedrov,
Yanay Florshaim,
Oriana K. Diessel,
Jonas von Milczewski,
Richard Schmidt,
Yoav Sagi
Abstract:
Understanding the behavior of an impurity strongly interacting with a Fermi sea is a long-standing challenge in many-body physics. When the interactions are short-ranged, two vastly different ground states exist: a polaron quasiparticle and a molecule dressed by the majority atoms. In the single-impurity limit, it is predicted that at a critical interaction strength, a first-order transition occur…
▽ More
Understanding the behavior of an impurity strongly interacting with a Fermi sea is a long-standing challenge in many-body physics. When the interactions are short-ranged, two vastly different ground states exist: a polaron quasiparticle and a molecule dressed by the majority atoms. In the single-impurity limit, it is predicted that at a critical interaction strength, a first-order transition occurs between these two states. Experiments, however, are always conducted in the finite temperature and impurity density regime. The fate of the polaron-to-molecule transition under these conditions, where the statistics of quantum impurities and thermal effects become relevant, is still unknown. Here, we address this question experimentally and theoretically. Our experiments are performed with a spin-imbalanced ultracold Fermi gas with tunable interactions. Utilizing a novel Raman spectroscopy combined with a high-sensitivity fluorescence detection technique, we isolate the quasiparticle contribution and extract the polaron energy, spectral weight, and the contact parameter. As the interaction strength is increased, we observe a continuous variation of all observables, in particular a smooth reduction of the quasiparticle weight as it goes to zero beyond the transition point. Our observation is in good agreement with a theoretical model where polaron and molecule quasiparticle states are thermally occupied according to their quantum statistics. At the experimental conditions, polaron states are hence populated even at interactions where the molecule is the ground state and vice versa. The emerging physical picture is thus that of a smooth transition between polarons and molecules and a coexistence of both in the region around the expected transition.
△ Less
Submitted 27 September, 2020; v1 submitted 28 January, 2020;
originally announced January 2020.
-
Intermolecular forces and correlations mediated by a phonon bath
Authors:
Xiang Li,
Enderalp Yakaboylu,
Giacomo Bighin,
Richard Schmidt,
Mikhail Lemeshko,
Andreas Deuchert
Abstract:
Inspired by the possibility to experimentally manipulate and enhance chemical reactivity in helium nanodroplets, we investigate the effective interaction and the resulting correlations between two diatomic molecules immersed in a bath of bosons. By analogy with the bipolaron, we introduce the \emph{biangulon} quasiparticle describing two rotating molecules that align with respect to each other due…
▽ More
Inspired by the possibility to experimentally manipulate and enhance chemical reactivity in helium nanodroplets, we investigate the effective interaction and the resulting correlations between two diatomic molecules immersed in a bath of bosons. By analogy with the bipolaron, we introduce the \emph{biangulon} quasiparticle describing two rotating molecules that align with respect to each other due to the effective attractive interaction mediated by the excitations of the bath. We study this system in different parameter regimes and apply several theoretical approaches to describe its properties. Using a Born-Oppenheimer approximation, we investigate the dependence of the effective intermolecular interaction on the rotational state of the two molecules. In the strong-coupling regime, a product-state ansatz shows that the molecules tend to have a strong alignment in the ground state. To investigate the system in the weak-coupling regime, we apply a one-phonon excitation variational ansatz, which allows us to access the energy spectrum. In comparison to the angulon quasiparticle, the biangulon shows shifted angulon instabilities and an additional spectral instability, where resonant angular momentum transfer between the molecules and the bath takes place. These features are proposed as an experimentally observable signature for the formation of the biangulon quasiparticle. Finally, by using products of single angulon and bare impurity wave functions as basis states, we introduce a diagonalization scheme that allows us to describe the transition from two separated angulons to a biangulon as a function of the distance between the two molecules.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Working principle and demonstrator of microwave-multiplexing for the HOLMES experiment microcalorimeters
Authors:
D. T. Becker,
D. A. Bennett,
M. Biasotti,
M. Borghesi,
V. Ceriale,
M. De Gerone,
M. Faverzani,
E. Ferri,
J. W. Fowler,
G. Gallucci,
J. D. Gard,
A. Giachero,
J. P. Hays-Wehle,
G. C. Hilton,
J. A. B Mates,
A. Nucciotti,
A. Orlando,
G. Pessina,
A. Puiu,
C. D. Reintsema,
D. R. Schmidt,
D. S. Swetz,
J. N. Ullom,
L. R Vale
Abstract:
The determination of the neutrino mass is an open issue in modern particle physics and astrophysics. The direct mass measurement is the only theory-unrelated experimental tool capable to probe such quantity. The HOLMES experiment aims to measure the end-point energy of the electron capture (EC) decay of $^{163}$Ho with a statistical sensitivity on the neutrino mass as low as $\sim 1$ eV/c$^2$. In…
▽ More
The determination of the neutrino mass is an open issue in modern particle physics and astrophysics. The direct mass measurement is the only theory-unrelated experimental tool capable to probe such quantity. The HOLMES experiment aims to measure the end-point energy of the electron capture (EC) decay of $^{163}$Ho with a statistical sensitivity on the neutrino mass as low as $\sim 1$ eV/c$^2$. In order to acquire the large needed statistics, by kee** the pile-up contribution as low as possible, 1024 transition edge sensors (TESs) with high energy and time resolutions will be employed. Microcalorimeter and bolometer arrays based on transition edge sensor with thousands of pixels are under development for several space-based and ground-based applications, including astrophysics, nuclear and particle physics, and materials science. The common necessary challenge is to develop pratical multiplexing techniques in order to simplify the cryogenics and readout systems. Despite the various multiplexing variants which are being developed have been successful, new approaches are needed to enable scaling to larger pixel counts and faster sensors, as requested for HOLMES, reducing also the cost and complexity of readout. A very novel technique that meets all of these requirements is based on superconducting microwave resonators coupled to radio-frequency Superconducting Quantum Interference Devices, in which the the changes in the TES input current is tranduced to a change in phase of a microwave signal. In this work we introduce the basics of this technique, the design and development of the first two-channel read out system and its performances with the first TES detectors specifically designed for HOLMES. In the last part we explain how to extend this approach scaling to 1024 pixels.
△ Less
Submitted 11 October, 2019;
originally announced October 2019.
-
Molecular dissociation in few-cycle laser pulses: From attosecond to femtosecond pulse duration
Authors:
T. Fiedlschuster,
J. Handt,
E. K. U. Gross,
R. Schmidt
Abstract:
The dissociation dynamics of diatomic molecules interacting with (near) optical laser pulses of different duration is investigated by an elaborate discussion of the electric field of the laser and by a direct solution of the time-dependent molecular Schrödinger equation. The systematic variation of the pulse duration from the electronic time scale (attoseconds) to the nuclear time scale (femtoseco…
▽ More
The dissociation dynamics of diatomic molecules interacting with (near) optical laser pulses of different duration is investigated by an elaborate discussion of the electric field of the laser and by a direct solution of the time-dependent molecular Schrödinger equation. The systematic variation of the pulse duration from the electronic time scale (attoseconds) to the nuclear time scale (femtoseconds) shows that the employed few-cycle laser pulses lead to well-known but quite different dissociation mechanisms. A comparative calculation with a model pulse and an experimentally realized attosecond pulse emphasizes that, and to what extent, a realistic modeling of the electric field is of central importance in the attosecond regime.
△ Less
Submitted 13 August, 2019;
originally announced August 2019.
-
A Model for Excess Johnson Noise in Superconducting Transition-edge Sensors
Authors:
Abigail Wessels,
Kelsey Morgan,
Daniel T. Becker,
Johnathon D. Gard,
Gene C. Hilton,
John A. B. Mates,
Carl D. Reintsema,
Daniel R. Schmidt,
Daniel S. Swetz,
Joel N. Ullom,
Leila R. Vale,
Douglas A. Bennett
Abstract:
Transition-Edge Sensors (TESs) are two-dimensional superconducting films used to detect energy or power. TESs are voltage biased in the resistive transition where the film resistance is both finite and a strong function of temperature. Electrical noise is observed in TESs that exceeds the predictions of existing noise theories. In this manuscript, we describe a model for the unexplained excess noi…
▽ More
Transition-Edge Sensors (TESs) are two-dimensional superconducting films used to detect energy or power. TESs are voltage biased in the resistive transition where the film resistance is both finite and a strong function of temperature. Electrical noise is observed in TESs that exceeds the predictions of existing noise theories. In this manuscript, we describe a model for the unexplained excess noise based on the dynamic resistance of the TES and noise mixed down from frequencies around the Josephson oscillations. We derive an expression for the power spectral density of this noise and show that its predictions match measured data.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Rydberg impurity in a Fermi gas: Quantum statistics and rotational blockade
Authors:
John Sous,
H. R. Sadeghpour,
T. C. Killian,
Eugene Demler,
Richard Schmidt
Abstract:
We consider the quench of an atomic impurity via a single Rydberg excitation in a degenerate Fermi gas. The Rydberg interaction with the background gas particles induces an ultralong-range potential that binds particles to form dimers, trimers, tetramers, etc. Such oligomeric molecules were recently observed in atomic Bose-Einstein condensates. In this work, we demonstrate with a functional determ…
▽ More
We consider the quench of an atomic impurity via a single Rydberg excitation in a degenerate Fermi gas. The Rydberg interaction with the background gas particles induces an ultralong-range potential that binds particles to form dimers, trimers, tetramers, etc. Such oligomeric molecules were recently observed in atomic Bose-Einstein condensates. In this work, we demonstrate with a functional determinant approach that quantum statistics and fluctuations have observable spectral consequences. We show that the occupation of molecular states is predicated on the Fermi statistics, which suppresses molecular formation in an emergent molecular shell structure. At large gas densities this leads to spectral narrowing, which can serve as a probe of the quantum gas thermodynamic properties.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
Thickness determination of MoS2, MoSe2, WS2 and WSe2 on transparent stamps used for deterministic transfer of 2D materials
Authors:
Najme S. Taghavi,
Patricia Gant,
Peng Huang,
Iris Niehues,
Robert Schmidt,
Steffen Michaelis de Vasconcellos,
Rudolf Bratschitsch,
Mar García-Hernández,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
Here, we propose a method to determine the thickness of the most common transition metal dichalcogenides (TMDCs) placed on the surface of transparent stamps, used for the deterministic placement of two-dimensional materials, by analyzing the red, green and blue channels of transmission-mode optical microscopy images of the samples. In particular, the blue channel transmittance shows a large and mo…
▽ More
Here, we propose a method to determine the thickness of the most common transition metal dichalcogenides (TMDCs) placed on the surface of transparent stamps, used for the deterministic placement of two-dimensional materials, by analyzing the red, green and blue channels of transmission-mode optical microscopy images of the samples. In particular, the blue channel transmittance shows a large and monotonic thickness dependence, making it a very convenient probe of the flake thickness. The method proved to be robust given the small flake-to-flake variation and the insensitivity to do** changes of MoS2. We also tested the method for MoSe2, WS2 and WSe2. These results provide a reference guide to identify the number of layers of this family of materials on transparent substrates only using optical microscopy.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
Mitigating the effects of charged particle strikes on TES arrays for exotic atom X-ray experiments
Authors:
H. Tatsuno,
D. A. Bennett,
W. B. Doriese,
M. Durkin,
J. W. Fowler,
J. D. Gard,
T. Hashimoto,
R. Hayakawa,
T. Hayashi,
G. C. Hilton,
Y. Ichinohe,
H. Noda,
G. C. O'Neil,
S. Okada,
C. D. Reintsema,
D. R. Schmidt,
D. S. Swetz,
J. N. Ullom,
S. Yamada
Abstract:
Exotic atom experiments place transition-edge-sensor (TES) microcalorimeter arrays in a high-energy charged particle rich environment. When a high-energy charged particle passes through the silicon substrate of a TES array, a large amount of energy is deposited and small pulses are generated across multiple pixels in the TES array due to thermal crosstalk. We have developed analysis techniques to…
▽ More
Exotic atom experiments place transition-edge-sensor (TES) microcalorimeter arrays in a high-energy charged particle rich environment. When a high-energy charged particle passes through the silicon substrate of a TES array, a large amount of energy is deposited and small pulses are generated across multiple pixels in the TES array due to thermal crosstalk. We have developed analysis techniques to assess and reduce the effects of charged particle events on exotic atom X-ray measurements. Using this technique, the high-energy and low-energy components of the X-ray peaks due to pileup are eliminated, improving the energy resolution from 6.6 eV to 5.7 eV at 6.9 keV.
△ Less
Submitted 20 May, 2020; v1 submitted 14 July, 2019;
originally announced July 2019.
-
Far-from-equilibrium dynamics of angular momentum in a quantum many-particle system
Authors:
Igor N. Cherepanov,
Giacomo Bighin,
Lars Christiansen,
Anders Vestergaard Jørgensen,
Richard Schmidt,
Henrik Stapelfeldt,
Mikhail Lemeshko
Abstract:
We use laser-induced rotation of single molecules embedded in superfluid helium nanodroplets to reveal angular momentum dynamics and transfer in a controlled setting, under far-from-equilibrium conditions. As an unexpected result, we observe pronounced oscillations of time-dependent molecular alignment that have no counterpart in gas-phase molecules. Angulon theory reveals that these oscillations…
▽ More
We use laser-induced rotation of single molecules embedded in superfluid helium nanodroplets to reveal angular momentum dynamics and transfer in a controlled setting, under far-from-equilibrium conditions. As an unexpected result, we observe pronounced oscillations of time-dependent molecular alignment that have no counterpart in gas-phase molecules. Angulon theory reveals that these oscillations originate from the unique rotational structure of molecules in He droplets and quantum-state-specific transfer of rotational angular momentum to the many-body He environment on picosecond timescales. Our results pave the way to understanding collective effects of macroscopic angular momentum exchange in solid state systems in a bottom-up fashion.
△ Less
Submitted 8 July, 2019; v1 submitted 28 June, 2019;
originally announced June 2019.
-
Fast reconstruction of single-shot wide-angle diffraction images through deep learning
Authors:
Thomas Stielow,
Robin Schmidt,
Christian Peltz,
Thomas Fennel,
Stefan Scheel
Abstract:
Single-shot X-ray imaging of short-lived nanostructures such as clusters and nanoparticles near a phase transition or non-crystalizing objects such as large proteins and viruses is currently the most elegant method for characterizing their structure. Using hard X-ray radiation provides scattering images that encode two-dimensional projections, which can be combined to identify the full three-dimen…
▽ More
Single-shot X-ray imaging of short-lived nanostructures such as clusters and nanoparticles near a phase transition or non-crystalizing objects such as large proteins and viruses is currently the most elegant method for characterizing their structure. Using hard X-ray radiation provides scattering images that encode two-dimensional projections, which can be combined to identify the full three-dimensional object structure from multiple identical samples. Wide-angle scattering using XUV or soft X-rays, despite yielding lower resolution, provides three-dimensional structural information in a single shot and has opened routes towards the characterization of non-reproducible objects in the gas phase. The retrieval of the structural information contained in wide-angle scattering images is highly non-trivial, and currently no efficient rigorous algorithm is known. Here we show that deep learning networks, trained with simulated scattering data, allow for fast and accurate reconstruction of shape and orientation of nanoparticles from experimental images. The gain in speed compared to conventional retrieval techniques opens the route for automated structure reconstruction algorithms capable of real-time discrimination and pre-identification of nanostructures in scattering experiments with high repetition rate -- thus representing the enabling technology for fast femtosecond nanocrystallography.
△ Less
Submitted 13 October, 2020; v1 submitted 17 June, 2019;
originally announced June 2019.
-
Probing Nonlocal Spatial Correlations in Quantum Gases with Ultra-long-range Rydberg Molecules
Authors:
J. D. Whalen,
S. K. Kanungo,
R. Ding,
M. Wagner,
R. Schmidt,
H. R. Sadeghpour,
S. Yoshida,
J. Burgdörfer,
F. B. Dunning,
T. C. Killian
Abstract:
We present photo-excitation of ultra-long-range Rydberg molecules as a probe of spatial correlations in quantum gases. Rydberg molecules can be created with well-defined internuclear spacing, set by the radius of the outer lobe of the Rydberg electron wavefunction $R_n$. By varying the principal quantum number $n$ of the target Rydberg state, the molecular excitation rate can be used to map the pa…
▽ More
We present photo-excitation of ultra-long-range Rydberg molecules as a probe of spatial correlations in quantum gases. Rydberg molecules can be created with well-defined internuclear spacing, set by the radius of the outer lobe of the Rydberg electron wavefunction $R_n$. By varying the principal quantum number $n$ of the target Rydberg state, the molecular excitation rate can be used to map the pair-correlation function of the trapped gas $g^{(2)}(R_n)$. We demonstrate this with ultracold Sr gases and probe pair-separation length scales ranging from $R_n = 1400 - 3200$ $a_0$, which are on the order of the thermal de Broglie wavelength for temperatures around 1 $μ$K. We observe bunching for a single-component Bose gas of $^{84}$Sr and anti-bunching due to Pauli exclusion at short distances for a polarized Fermi gas of $^{87}$Sr, revealing the effects of quantum statistics.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Phonon-assisted emission and absorption of individual color centers in hexagonal boron nitride
Authors:
Daniel Wigger,
Robert Schmidt,
Osvaldo Del Pozo-Zamudio,
Johann A. Preuß,
Philipp Tonndorf,
Robert Schneider,
Paul Steeger,
Johannes Kern,
Yashar Khodaei,
Jaroslaw Sperling,
Steffen Michaelis de Vasconcellos,
Rudolf Bratschitsch,
Tilmann Kuhn
Abstract:
Defect centers in hexagonal boron nitride represent room-temperature single-photon sources in a layered van der Waals material. These light emitters appear with a wide range of transition energies ranging over the entire visible spectrum, which renders the identification of the underlying atomic structure challenging. In addition to their eminent properties as quantum light emitters, the coupling…
▽ More
Defect centers in hexagonal boron nitride represent room-temperature single-photon sources in a layered van der Waals material. These light emitters appear with a wide range of transition energies ranging over the entire visible spectrum, which renders the identification of the underlying atomic structure challenging. In addition to their eminent properties as quantum light emitters, the coupling to phonons is remarkable. Their photoluminescence exhibits significant side band emission well separated from the zero phonon line (ZPL) and an asymmetric broadening of the ZPL itself. In this combined theoretical and experimental study we show that the phonon side bands can be well described in terms of the coupling to bulk longitudinal optical (LO) phonons. To describe the ZPL asymmetry we show that in addition to the coupling to longitudinal acoustic (LA) phonons also the coupling to local mode oscillations of the defect center with respect to the entire host crystal has to be considered. By studying the influence of the emitter's wave function dimensions on the phonon side bands we find reasonable values for size of the wave function and the deformation potentials. We perform photoluminescence excitation measurements to demonstrate that the excitation of the emitters is most efficient by LO-phonon assisted absorption.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.