Showing 1–27 of 27 results for author: Schmid, M

ViPErLEED package I: Calculation of $I(V)$ curves and structural optimization

Authors: Florian Kraushofer, Alexander M. Imre, Giada Franceschi, Tilman Kißlinger, Erik Rheinfrank, Michael Schmid, Ulrike Diebold, Lutz Hammer, Michele Riva

Abstract: Low-energy electron diffraction (LEED) is a widely used technique in surface-science. Yet, it is rarely used to its full potential. The quantitative information about the surface structure, contained in the modulation of the intensities of the diffracted beams as a function of incident electron energy, LEED I(V), is underutilized. To acquire these data, minor adjustments would be required in most… ▽ More Low-energy electron diffraction (LEED) is a widely used technique in surface-science. Yet, it is rarely used to its full potential. The quantitative information about the surface structure, contained in the modulation of the intensities of the diffracted beams as a function of incident electron energy, LEED I(V), is underutilized. To acquire these data, minor adjustments would be required in most experimental setups, but existing analysis software is cumbersome to use. ViPErLEED (Vienna package for Erlangen LEED) lowers these barriers, introducing a combined solution for data acquisition, extraction, and computational analysis. These parts are discussed in three separate publications. Here, the focus is on the computational part of ViPErLEED, which performs automated LEED-I(V) calculations and structural optimization. Minimal user input is required, and the functionality is significantly enhanced compared to existing solutions. Computation is performed by embedding the Erlangen tensor-LEED package (TensErLEED). ViPErLEED manages parallelization, monitors convergence, and processes input and output. This makes LEED I(V) more accessible to new users while minimizing the potential for errors and the manual labor. Added functionality includes structure-dependent defaults, automatic detection of bulk and surface symmetries and their relationship, automated symmetry-preserving search procedures, adjustments to the TensErLEED code to handle larger systems, as well as parallelization and optimization. Modern file formats are used as input and output, and there is a direct interface to the Atomic Simulation Environment (ASE) package. The software is implemented primarily in Python (version >=3.7) and provided as an open-source package (GNU GPLv3 or later). A structure determination of the $α$-Fe2O3(1-102)-(1x1) surface is presented as an example for the application of the software. △ Less

Submitted 26 June, 2024; originally announced June 2024.

ViPErLEED package II: Spot tracking, extraction and processing of I(V) curves

Authors: Michael Schmid, Florian Kraushofer, Alexander M. Imre, Tilman Kißlinger, Lutz Hammer, Ulrike Diebold, Michele Riva

Abstract: As part of the ViPErLEED project (Vienna package for Erlangen LEED, low-energy electron diffraction), computer programs have been developed for facile and user-friendly data extraction from movies of LEED images. The programs make use of some concepts from astronomical image processing and analysis. As a first step, flat-field and dark-frame corrections reduce the effects of inhomogeneities of the… ▽ More As part of the ViPErLEED project (Vienna package for Erlangen LEED, low-energy electron diffraction), computer programs have been developed for facile and user-friendly data extraction from movies of LEED images. The programs make use of some concepts from astronomical image processing and analysis. As a first step, flat-field and dark-frame corrections reduce the effects of inhomogeneities of the camera and screen. In a second step, for identifying all diffraction maxima ("spots"), it is sufficient to manually mark and label a single spot or very few spots. Then the program can automatically identify all other spots and determine the distortions of the image. This forms the basis for automatic spot tracking (following the "beams" as they move across the LEED screen) and intensity measurement. Even for complex structures with hundreds to a few thousand diffraction beams, this step takes less than a minute. The package also includes a program for further processing of these I(V) curves (averaging of equivalent beams, manual and/or automatic selection, smoothing) as well as several utilities. The software is implemented as a set of plugins for the public-domain image processing program ImageJ and provided as an open-source package. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Stoichiometric reconstruction of the Al$_{2}$O$_{3}$(0001) surface

Authors: Johanna I. Hütner, Andrea Conti, David Kugler, Florian Mittendorfer, Georg Kresse, Michael Schmid, Ulrike Diebold, Jan Balajka

Abstract: Macroscopic properties of materials stem from fundamental atomic-scale details, yet for insulators, resolving surface structures remains a challenge. The basal (0001) plane of $α$-Al$_{2}$O$_{3}$ was imaged with noncontact atomic force microscopy with an atomically-defined tip apex. The surface forms a complex $({\sqrt31} {\times} {\sqrt31})R{\pm}9°$ reconstruction. The lateral positions of the in… ▽ More Macroscopic properties of materials stem from fundamental atomic-scale details, yet for insulators, resolving surface structures remains a challenge. The basal (0001) plane of $α$-Al$_{2}$O$_{3}$ was imaged with noncontact atomic force microscopy with an atomically-defined tip apex. The surface forms a complex $({\sqrt31} {\times} {\sqrt31})R{\pm}9°$ reconstruction. The lateral positions of the individual O and Al surface atoms come directly from experiment; how these connect to the underlying crystal bulk was determined based on computational modeling. Before the restructuring, the surface Al atoms assume an unfavorable, threefold planar coordination; the reconstruction allows a rehybridization with subsurface O that leads to a substantial energy gain. The reconstructed surface remains stoichiometric, Al$_{2}$O$_{3}$. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Infrared Reflection Absorption Spectroscopy Setup with Incidence Angle Selection for Surfaces of Non-Metals

Authors: David Rath, Vojtěch Mikerásek, Chunlei Wang, Moritz Eder, Michael Schmid, Ulrike Diebold, Gareth S. Parkinson, Jiří Pavelec

Abstract: Infrared Reflection Absorption Spectroscopy (IRAS) on dielectric single crystals is challenging because the optimal incidence angles for light-adsorbate interaction coincide with regions of low IR reflectivity. Here, we introduce an optimized IRAS setup that maximizes the signal-to-noise ratio for non-metals. This is achieved by maximizing light throughput, and by selecting optimal incidence angle… ▽ More Infrared Reflection Absorption Spectroscopy (IRAS) on dielectric single crystals is challenging because the optimal incidence angles for light-adsorbate interaction coincide with regions of low IR reflectivity. Here, we introduce an optimized IRAS setup that maximizes the signal-to-noise ratio for non-metals. This is achieved by maximizing light throughput, and by selecting optimal incidence angles that directly impact the peak heights in the spectra. The setup uses a commercial FTIR spectrometer and is usable in ultra-high vacuum (UHV). Specifically, the design features sample illumination and collection mirrors with a high numerical aperture inside the UHV system, and an adjustable aperture to select the incidence angle range on the sample. This is important for p-polarized measurements on dielectrics, because the peaks in the spectra reverse direction at the Brewster angle (band inversion). The system components are connected precisely via a single flange, ensuring long-term stability. We studied the signal-to-noise (SNR) variation in p-polarized IRAS spectra for one monolayer of CO on TiO2(110) as a function of incidence angle range, where a maximum signal-to-noise ratio of 70 was achieved at 4 cm-1 resolution in five minutes measurement time. The capabilities for s-polarization are demonstrated by measuring one monolayer D2O adsorbed on a TiO2(110) surface, where a SNR of 65 was achieved at a delta_R/R0 peak height of 1.4x10-4 in twenty minutes. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Comments: supplementary information included

Controlling Spontaneous Orientation Polarization in Organic Semiconductors -- The Case of Phosphine Oxides

Authors: Albin Cakaj, Markus Schmid, Alexander Hofmann, Wolfgang Brütting

Abstract: Upon film growth by physical vapor deposition, the preferential orientation of polar organic molecules can result in a non-zero permanent dipole moment (PDM) alignment, causing a macroscopic film polarization. This effect, known as spontaneous orientation polarization (SOP), was studied in the case of different phosphine oxides. We investigate the control of SOP by molecular design and film-growth… ▽ More Upon film growth by physical vapor deposition, the preferential orientation of polar organic molecules can result in a non-zero permanent dipole moment (PDM) alignment, causing a macroscopic film polarization. This effect, known as spontaneous orientation polarization (SOP), was studied in the case of different phosphine oxides. We investigate the control of SOP by molecular design and film-growth conditions. Our results show that using less polar phosphine oxides with just one phosphor-oxygen bond yields an exceptionally high degree of SOP with the so-called giant surface potential (slope) reaching more than 150mV/nm in a neat BCPO film grown at room temperature. Additionally, by altering the evaporation rate and the substrate temperature, we are able to control the SOP magnitude over a broad range from 0 to almost 300mV/nm. Diluting BCPO in a non-polar host enhances the PDM alignment only marginally, but combining temperature control together with dipolar do** can result in almost perfectly aligned molecules with more than 80% of their PDMs standing upright on the substrate on average. △ Less

Submitted 6 September, 2023; v1 submitted 5 September, 2023; originally announced September 2023.

Variational Benchmarks for Quantum Many-Body Problems

Authors: Dian Wu, Riccardo Rossi, Filippo Vicentini, Nikita Astrakhantsev, Federico Becca, Xiaodong Cao, Juan Carrasquilla, Francesco Ferrari, Antoine Georges, Mohamed Hibat-Allah, Masatoshi Imada, Andreas M. Läuchli, Guglielmo Mazzola, Antonio Mezzacapo, Andrew Millis, Javier Robledo Moreno, Titus Neupert, Yusuke Nomura, Jannes Nys, Olivier Parcollet, Rico Pohle, Imelda Romero, Michael Schmid, J. Maxwell Silvester, Sandro Sorella , et al. (8 additional authors not shown)

Abstract: The continued development of novel many-body approaches to ground-state problems in physics and chemistry calls for a consistent way to assess its overall progress. Here we introduce a metric of variational accuracy, the V-score, obtained from the variational energy and its variance. We provide the most extensive curated dataset of variational calculations of many-body quantum systems to date, ide… ▽ More The continued development of novel many-body approaches to ground-state problems in physics and chemistry calls for a consistent way to assess its overall progress. Here we introduce a metric of variational accuracy, the V-score, obtained from the variational energy and its variance. We provide the most extensive curated dataset of variational calculations of many-body quantum systems to date, identifying cases where state-of-the-art numerical approaches show limited accuracy, and novel algorithms or computational platforms, such as quantum computing, could provide improved accuracy. The V-score can be used as a metric to assess the progress of quantum variational methods towards quantum advantage for ground-state problems, especially in regimes where classical verifiability is impossible. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Comments: 25 pages, 5 figures

The Possible Emergence of an Attractive Inverse-Square Law from the Wave-Nature of Particles

Authors: Dong Zhang, Pavel Kroupa, Jan Pflamm-Altenburg, Manfred Schmid

Abstract: A model of a particle in finite space is developed and the properties that the particle may possess under this model are studied. The possibility that particles attract each other due to their own wave nature is discussed. The assumption that the particles are spatially confined oscillations (SCO) in the medium is used. The relation between the SCO and the refractive index of the medium in the ide… ▽ More A model of a particle in finite space is developed and the properties that the particle may possess under this model are studied. The possibility that particles attract each other due to their own wave nature is discussed. The assumption that the particles are spatially confined oscillations (SCO) in the medium is used. The relation between the SCO and the refractive index of the medium in the idealized universe is derived. Due to the plane wave constituents of SCOs, the presence of a refractive index field with a nonzero gradient causes the SCO to accelerate. The SCO locally changes the refractive index such that another SCO is accelerated towards it, and vice versa. It is concluded that the particles can attract each other due to their wave nature and an inverse-square-type acceleration emerges. The constant parameter in the inverse-square-type acceleration is used to compare with the gravitational constant $G_N$, and the possibility of non inverse-square-type behavior is preliminary discussed. △ Less

Submitted 27 January, 2023; v1 submitted 21 December, 2022; originally announced December 2022.

Comments: 11 pages, 4 figures; Revision of part of the description in Section 4.1.4, no change to the final results and conclusions

Journal ref: Advances in High Energy Physics, vol. 2022, Article ID 2907762, 15 pages, 2022

Mode-center Placement of Monolayer WS$_{2}$ in a Photonic Polymer Waveguide

Authors: Angelina Frank, Justin Zhou, James A. Grieve, Ivan Verzhbitskiy, José Viana-Gomes, Leyi Loh, Michael Schmid, Kenji Watanabe, Takashi Taniguchi, Goki Eda, Alexander Ling

Abstract: Effective integration of 2D materials such as monolayer transition metal dichalcogenides (TMDs) into photonic waveguides and integrated circuits is being intensely pursued due to the materials' strong exciton-based optical response. Here, we present a platform where a WS$_{2}$-hBN 2D heterostructure is directly integrated into the photonic mode-center of a novel polymer ridge waveguide. FDTD simul… ▽ More Effective integration of 2D materials such as monolayer transition metal dichalcogenides (TMDs) into photonic waveguides and integrated circuits is being intensely pursued due to the materials' strong exciton-based optical response. Here, we present a platform where a WS$_{2}$-hBN 2D heterostructure is directly integrated into the photonic mode-center of a novel polymer ridge waveguide. FDTD simulations and collection of photoluminescence from the guided mode indicate that this system exhibits significantly improved waveguide-emitter coupling over a previous elastomer platform. This is facilitated by the platform's enhanced refractive-index contrast and a new method for mode-center integration of the coupled TMD. The integration is based on a simple dry-transfer process that is applicable to other 2D materials, and the platform's elastomeric nature is a natural fit to explore strain-tunable hybrid-photonic devices. The demonstrated ability of coupling photoluminescence to a polymer waveguide opens up new possibilities for hybrid-photonic systems in a variety of contexts. △ Less

Submitted 23 July, 2021; originally announced July 2021.

3D printed hybrid refractive/diffractive achromat and apochromat for the visible wavelength range

Authors: Michael Schmid, Florian Sterl, Simon Thiele, Alois Herkommer, Harald Giessen

Abstract: Three-dimensional (3D) direct laser writing is a powerful technology to create nano- and microscopic optical devices. While the design freedom of this technology offers the possibility to reduce different monochromatic aberrations, reducing chromatic aberrations is often neglected. In this Letter, we successfully demonstrate the combination of refractive and diffractive surfaces to create a refrac… ▽ More Three-dimensional (3D) direct laser writing is a powerful technology to create nano- and microscopic optical devices. While the design freedom of this technology offers the possibility to reduce different monochromatic aberrations, reducing chromatic aberrations is often neglected. In this Letter, we successfully demonstrate the combination of refractive and diffractive surfaces to create a refractive/diffractive achromat and show, to the best of our knowledge, the first refractive/diffractive apochromat by using DOEs and simultaneously combining two different photoresists, namely IP-S and IP-n162. These combinations drastically reduce chromatic aberrations in 3D printed micro-optics for the visible wavelength range. The optical properties, as well as the substantial reduction of chromatic aberrations, are characterized, and we outline the benefits of 3D direct laser written achromats and apochromats for micro-optics. △ Less

Submitted 19 July, 2021; originally announced July 2021.

Comments: OL copyright message from first page of the manuscript has to be displayed at some prominent place near the article with an hyperlink to online abstract of the paper in OSA Journal https://doi.org/10.1364/OL.423196

Journal ref: Opt. Lett. 46, 2485-2488 (2021)

The dynamics of spatially confined oscillations

Authors: Till Stadtler, Pavel Kroupa, Manfred Schmid

Abstract: The possible relation of the wave nature of particles to gravitation as an emergent phenomenon is addressed. Hypothetical particles are considered as spatially confined oscillations (SCOs) and are constructed through the superposition of plane waves. The effect of a continuously changing refractive index (speed of propagation field) on SCOs is calculated and the continuous Ibn-Sahl--Snell law of r… ▽ More The possible relation of the wave nature of particles to gravitation as an emergent phenomenon is addressed. Hypothetical particles are considered as spatially confined oscillations (SCOs) and are constructed through the superposition of plane waves. The effect of a continuously changing refractive index (speed of propagation field) on SCOs is calculated and the continuous Ibn-Sahl--Snell law of refraction is derived. Refracted plane wave constituents of SCOs in an inhomogeneous medium cause the oscillation as a whole to accelerate as an entity. This acceleration is described by a geodesic equation, in much the same way as in general relativity. The proper time of an SCO can be defined via its oscillation frequency. The proper time and its change along the trajectory are equivalent to a particle in general relativity as described by the 0th component of its geodesic equation. An SCO in an inhomogeneous refractive index field exhibits general relativistic properties based on basic wave mechanics. Properties derived from direct calculations are length contraction, gravitational red- and blueshift and Thomas precession. The presented theory is an approximation for oscillations which are small compared to changes in the refractive index field. SCOs in an inhomogeneous medium may thus yield a naturally emerging particle-field interaction with general relativistic properties and may allow a useful vantage point on the nature of gravitation using classical-wave experiments. △ Less

Submitted 5 May, 2021; originally announced May 2021.

Comments: 23 pages, 5 figures, LaTex, published by the Canadian Journal of Physics

Journal ref: 2021CaJPh..99..222S

Fast low-noise transimpedance amplifier for scanning tunneling microscopy and beyond

Authors: Martin Štubian, Juraj Bobek, Martin Setvin, Ulrike Diebold, Michael Schmid

Abstract: A transimpedance amplifier has been designed for scanning tunneling microscopy (STM). The amplifier features low noise (limited by the Johnson noise of the 1 GΩ feedback resistor at low input current and low frequencies), sufficient bandwidth for most STM applications (50 kHz at 35 pF input capacitance), a large dynamic range (0.1 pA--50 nA without range switching), and a low input voltage offset.… ▽ More A transimpedance amplifier has been designed for scanning tunneling microscopy (STM). The amplifier features low noise (limited by the Johnson noise of the 1 GΩ feedback resistor at low input current and low frequencies), sufficient bandwidth for most STM applications (50 kHz at 35 pF input capacitance), a large dynamic range (0.1 pA--50 nA without range switching), and a low input voltage offset. The amplifier is also suited for placing its first stage into the cryostat of a low-temperature STM, minimizing the input capacitance and reducing the Johnson noise of the feedback resistor. The amplifier may also find applications for specimen current imaging and electron-beam-induced current measurements in scanning electron microscopy and as a photodiode amplifier with a large dynamic range. This paper also discusses the sources of noise including the often neglected effect of non-balanced input impedance of operational amplifiers and describes how to accurately measure and adjust the frequency response of low-current transimpedance amplifiers. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Journal ref: Review of Scientific Instruments 91, 074701 (2020)

Propagation of spin waves through a Néel domain wall

Authors: Ondřej Wojewoda, Tobias Hula, Lukáš Flajšman, Marek Vaňatka, Jonáš Gloss, Jakub Holobrádek, Michal Staňo, Sven Stienen, Lukas Körber, Katrin Schultheiß, Michael Schmid, Helmut Schultheiß, Michal Urbánek

Abstract: Spin waves have the potential to be used as a new platform for data transfer and processing as they can reach wavelengths in the nanometer range and frequencies in the terahertz range. To realize a spin-wave device, it is essential to be able to manipulate the amplitude as well as the phase of spin waves. Several theoretical and recently also experimental works have shown that the spin-wave phase… ▽ More Spin waves have the potential to be used as a new platform for data transfer and processing as they can reach wavelengths in the nanometer range and frequencies in the terahertz range. To realize a spin-wave device, it is essential to be able to manipulate the amplitude as well as the phase of spin waves. Several theoretical and recently also experimental works have shown that the spin-wave phase can be manipulated by the transmission through a domain wall (DW). Here, we study propagation of spin waves through a DW by means of micro-focused Brillouin light scattering microscopy ($μ$BLS). The acquired 2D spin-wave intensity maps reveal that spin-wave transmission through a Néel DW is influenced by a topologically enforced circular Bloch line in the DW center and that the propagation regime depends on the spin-wave frequency. In the first regime, two spin-wave beams propagating around the circular Bloch line are formed, whereas in the second regime, spin waves propagate in a single central beam through the circular Bloch line. Phase-resolved $μ$BLS measurements reveal a phase shift upon transmission through the domain wall for both regimes. Micromagnetic modelling of the transmitted spin waves unveils a distortion of their phase fronts which needs to be taken into account when interpreting the measurements and designing potential devices. Moreover, we show, by means of micromagnetic simulations, that an external magnetic field can be used to move the circular Bloch line within the DW and to manipulate spin-wave propagation. △ Less

Submitted 3 June, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 5 pages, 4 figures

Journal ref: Applied Physics Letters 117(2), 022405 (2020)

Self-limited Growth of an Oxyhydroxide Phase at the Fe3O4(001) Surface in Liquid and Ambient Pressure Water

Authors: Florian Kraushofer, Francesca Mirabella, Jian Xu, Jiří Pavelec, Jan Balajka, Matthias Müllner, Nikolaus Resch, Zdeněk Jakub, Jan Hulva, Matthias Meier, Michael Schmid, Ulrike Diebold, Gareth S. Parkinson

Abstract: Atomic-scale investigations of metal oxide surfaces exposed to aqueous environments are vital to understand degradation phenomena (e.g. dissolution and corrosion) as well as the performance of these materials in applications. Here, we utilize a new experimental setup for the UHV-compatible dosing of liquids to explore the stability of the Fe3O4(001)-c(2x2) surface following exposure to liquid and… ▽ More Atomic-scale investigations of metal oxide surfaces exposed to aqueous environments are vital to understand degradation phenomena (e.g. dissolution and corrosion) as well as the performance of these materials in applications. Here, we utilize a new experimental setup for the UHV-compatible dosing of liquids to explore the stability of the Fe3O4(001)-c(2x2) surface following exposure to liquid and ambient pressure water. X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) data show that extensive hydroxylation causes the surface to revert to a bulk-like (1x1) termination. However, scanning tunnelling microscopy (STM) images reveal a more complex situation, with the slow growth of an oxyhydroxide phase, which ultimately saturates at approximately 40% coverage. We conclude that the new material contains OH groups from dissociated water coordinated to Fe cations extracted from subsurface layers, and that the surface passivates once the surface oxygen lattice is saturated with H because no further dissociation can take place. The resemblance of the STM images to those acquired in previous electrochemical STM (EC-STM) studies lead us to believe a similar structure exists at the solid-electrolyte interface during immersion at pH 7. △ Less

Submitted 28 August, 2019; originally announced August 2019.

Getting the Right Twist: Influence of Donor-Acceptor Dihedral Angle on Exciton Kinetics and Singlet-Triplet Gap in Deep Blue Thermally Activated Delayed Fluorescence Emitter

Authors: Sebastian Weissenseel, Nikita A. Drigo, Liudmila G. Kudriashova, Markus Schmid, Thomas Morgenstern, Kun-Han Lin, Antonio Prlj, Clémence Corminboeuf, Andreas Sperlich, Wolfgang Brütting, Mohammad Khaja Nazeeruddin, Vladimir Dyakonov

Abstract: Here, a novel deep blue emitter SBABz4 for use in organic light-emitting diodes (OLED) is investigated. The molecular design of the emitter enables thermally activated delayed fluorescence (TADF), which we examine by temperature-dependent time-resolved electroluminescence (trEL) and photoluminescence (trPL). We show that the dihedral angle between donor and acceptor strongly affects the oscillator… ▽ More Here, a novel deep blue emitter SBABz4 for use in organic light-emitting diodes (OLED) is investigated. The molecular design of the emitter enables thermally activated delayed fluorescence (TADF), which we examine by temperature-dependent time-resolved electroluminescence (trEL) and photoluminescence (trPL). We show that the dihedral angle between donor and acceptor strongly affects the oscillator strength of the charge transfer state alongside the singlet-triplet gap. The angular dependence of the singlet-triplet gap is calculated by time-dependent density functional theory (TD-DFT). A gap of 15 meV is calculated for the relaxed ground state configuration of SBABz4 with a dihedral angle between the donor and acceptor moieties of 86°. Surprisingly, an experimentally obtained energy gap of 72+/-5 meV can only be explained by torsion angles in the range of 70°-75°. Molecular dynamics (MD) simulations showed that SBABz4 evaporated at high temperature acquires a distribution of torsion angles, which immediately leads to the experimentally obtained energy gap. Moreover, the emitter orientation anisotropy in a host matrix shows an 80% ratio of horizontally oriented dipoles, which is highly desirable for efficient light outcoupling. Understanding intramolecular donor-acceptor geometry in evaporated films is crucial for OLED applications, because it affects oscillator strength and TADF efficiency. △ Less

Submitted 28 October, 2019; v1 submitted 20 August, 2019; originally announced August 2019.

Journal ref: J. Phys. Chem. C 2019, 123, 27778-27784

Zero-field propagation of spin waves in waveguides prepared by focused ion beam direct writing

Authors: Lukáš Flajšman, Kai Wagner, Marek Vaňatka, Jonáš Gloss, Viola Křižáková, Michael Schmid, Helmut Schultheiss, Michal Urbánek

Abstract: Metastable face-centered-cubic Fe78Ni22 thin films grown on Cu(001) substrates are excellent candidates for focused ion beam direct writing of magnonic structures due to their favorable magnetic properties after ion-beam-induced transformation. The focused ion beam transforms the originally nonmagnetic fcc phase into the ferromagnetic bcc phase with additional control over the direction of uniaxia… ▽ More Metastable face-centered-cubic Fe78Ni22 thin films grown on Cu(001) substrates are excellent candidates for focused ion beam direct writing of magnonic structures due to their favorable magnetic properties after ion-beam-induced transformation. The focused ion beam transforms the originally nonmagnetic fcc phase into the ferromagnetic bcc phase with additional control over the direction of uniaxial magnetic in-plane anisotropy. The magnetocrystalline anisotropy in transformed areas is strong enough to stabilize the magnetization in transverse direction to the long axis of narrow waveguides. Therefore, it is possible to propagate spin waves in these waveguides without the presence of an external magnetic field in the favorable Demon-Eshbach geometry. Phase-resolved micro-focused Brillouin light scattering yields the dispersion relation of these waveguides in zero as well as in nonzero external magnetic fields. △ Less

Submitted 18 July, 2019; v1 submitted 28 June, 2019; originally announced June 2019.

Journal ref: Phys. Rev. B 101, 014436 (2020)

Absorption Enhancement for Ultra-Thin Solar Fuel Devices with Plasmonic Gratings

Authors: Phillip Manley, Fatwa F. Abdi, Sean Berglund, A. T. M. Nazmul Islam, Sven Burger, Roel van de Krol, Martina Schmid

Abstract: We present a concept for an ultra-thin solar fuel device with a nanostructured back contact. Using rigorous simulations we show that the nanostructuring significantly increases the absorption in the semiconductor, CuBi$_2$O$_4$ in this case, by 47\% (5.2~mAcm$^{-2}$) through the excitation of plasmonic modes. We are able to attribute the resonances in the device to metal-insulator-metal plasmons c… ▽ More We present a concept for an ultra-thin solar fuel device with a nanostructured back contact. Using rigorous simulations we show that the nanostructuring significantly increases the absorption in the semiconductor, CuBi$_2$O$_4$ in this case, by 47\% (5.2~mAcm$^{-2}$) through the excitation of plasmonic modes. We are able to attribute the resonances in the device to metal-insulator-metal plasmons coupled to either localised surface plasmon resonances or surface plasmon polaritons. Rounding applied to the metallic corners leads to a blueshift in the resonance wavelength while maintaining absorption enhancement, thus supporting the possibility for a successful realization of the device. For a 2D array, the tolerance of the polarization-dependent absorption enhancement is investigated and compared to a planar structure. The device maintains an absorption enhancement up to incident angles of 75$^{\circ}$. The study highlights the high potential for plasmonics in ultra-thin opto-electronic devices such as in solar fuel generation. △ Less

Submitted 2 January, 2019; originally announced January 2019.

Comments: 4 Figures 18 Pages. Supporting Information Included (7 Figures 11 pages)

Journal ref: ACS Appl. Energy Mater. 1 p.5810-5815 (2018)

Efficient determination of bespoke optically active nanoparticle distributions

Authors: Phillip Manley, Min Song, Sven Burger, Martina Schmid

Abstract: We provide a computational method for quickly determining the correct distribution of optically active nanoparticles for a desired response. This is achieved by simulating the optical response of single nanoparticles and performing a statistical averaging over different sizes. We find good agreement between experiment and theory for the transmission, reflectance and absorption of both an ordered a… ▽ More We provide a computational method for quickly determining the correct distribution of optically active nanoparticles for a desired response. This is achieved by simulating the optical response of single nanoparticles and performing a statistical averaging over different sizes. We find good agreement between experiment and theory for the transmission, reflectance and absorption of both an ordered and disordered array. By repeating the simulation for different particle distributions, we show that the method is capable of accurately predicting the correct nanoparticle distribution for a desired optical response. We provide a referential graph for predicting the optical response of different Ag nanoparticle distributions on a glass substrate, which can be extended to other substrate and particle materials, and particle shapes and sizes. △ Less

Submitted 2 January, 2019; originally announced January 2019.

Comments: 6 figures

Journal ref: Journal of Optics 20(8) p.085003 (2018)

Formation and dynamics of small polarons on the rutile TiO$_2$(110) surface

Authors: Michele Reticcioli, Martin Setvin, Michael Schmid, Ulrike Diebold, Cesare Franchini

Abstract: Charge trap** and formation of polarons is a pervasive phenomenon in transition metal oxide compounds, in particular at the surface, affecting fundamental physical properties and functionalities of the hosting materials. Here we investigate via first-principle techniques the formation and dynamics of small polarons on the reduced surface of titanium dioxide, an archetypal system for polarons, fo… ▽ More Charge trap** and formation of polarons is a pervasive phenomenon in transition metal oxide compounds, in particular at the surface, affecting fundamental physical properties and functionalities of the hosting materials. Here we investigate via first-principle techniques the formation and dynamics of small polarons on the reduced surface of titanium dioxide, an archetypal system for polarons, for a wide range of oxygen vacancy concentrations. We report how the essential features of polarons can be adequately accounted in terms of few quantities: the local structural and chemical environment, the attractive interaction between negatively charged polarons and positively charged oxygen vacancies, and the spin-dependent polaron-polaron Coulomb repulsion. We combined molecular dynamics simulations on realistic samples derived from experimental observations with simplified static models, aiming to disentangle the various variables at play. We find that depending on the specific trap** site, different types of polarons can be formed, with distinct orbital symmetries and different degree of localization and structural distortion. The energetically most stable polaron site is the subsurface Ti atom below the undercoordinated surface Ti atom, owing to a small energy cost to distort the lattice and a suitable electrostatic potential. Polaron-polaron repulsion and polaron-vacancy attraction determine the spatial distribution of polarons as well as the energy of the polaronic in-gap state. In the range of experimentally reachable oxygen vacancy concentrations the calculated data are in excellent agreement with observations, thus validating the overall interpretation. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. B 98, 045306 (2018)

Focused ion beam direct writing of magnetic patterns with controlled structural and magnetic properties

Authors: Michal Urbánek, Lukáš Flajšman, Viola Křižáková, Jonáš Gloss, Michal Horký, Michael Schmid, Peter Varga

Abstract: Focused ion beam irradiation of metastable Fe$_{78}$Ni$_{22}$ thin films grown on Cu(100) substrates is used to create ferromagnetic, body-centered-cubic patterns embedded into paramagnetic, face-centered-cubic surrounding. The structural and magnetic phase transformation can be controlled by varying parameters of the transforming gallium ion beam. The focused ion beam parameters as ion dose, numb… ▽ More Focused ion beam irradiation of metastable Fe$_{78}$Ni$_{22}$ thin films grown on Cu(100) substrates is used to create ferromagnetic, body-centered-cubic patterns embedded into paramagnetic, face-centered-cubic surrounding. The structural and magnetic phase transformation can be controlled by varying parameters of the transforming gallium ion beam. The focused ion beam parameters as ion dose, number of scans, and scanning direction can be used not only to control a degree of transformation, but also to change the otherwise four-fold in-plane magnetic anisotropy into the uniaxial anisotropy along specific crystallographic direction. This change is associated with a preferred growth of specific crystallographic domains. The possibility to create magnetic patterns with continuous magnetization transitions and at the same time to create patterns with periodical changes in magnetic anisotropy makes this system an ideal candidate for rapid prototy** of a large variety of nanostructured samples. Namely spin-wave waveguides and magnonic crystals can be easily combined into complex devices in a single fabrication step. △ Less

Submitted 12 March, 2018; originally announced March 2018.

Comments: 11 pages, 4 figures

Journal ref: APL Materials 6, 060701 (2018)

Water Agglomerates on Fe3O4(001)

Authors: Matthias Meier, Jan Hulva, Zdenek Jakub, Jiri Pavelec, Martin Setvin, Roland Bliem, Michael Schmid, Ulrike Diebold, Cesare Franchini, Gareth S. Parkinson

Abstract: Determining the structure of water adsorbed on solid surfaces is a notoriously difficult task, and pushes the limits of experimental and theoretical techniques. Here, we follow the evolution of water agglomerates on Fe3O4(001); a complex mineral surface relevant in both modern technology and the natural environment. Strong OH-H2O bonds drive the formation of partially-dissociated water dimers at l… ▽ More Determining the structure of water adsorbed on solid surfaces is a notoriously difficult task, and pushes the limits of experimental and theoretical techniques. Here, we follow the evolution of water agglomerates on Fe3O4(001); a complex mineral surface relevant in both modern technology and the natural environment. Strong OH-H2O bonds drive the formation of partially-dissociated water dimers at low coverage, but a surface reconstruction restricts the density of such species to one per unit cell. The dimers act as an anchor for further water molecules as the coverage increases, leading first to partially-dissociated water trimers, and then to a ring-like, hydrogen-bonded network that covers the entire surface. Unraveling this complexity requires the concerted application of several state-of-the-art methods. Quantitative temperature programmed desorption (TPD) reveals the coverage of stable structures, monochromatic x-ray photoelectron spectroscopy (XPS) shows the extent of partial dissociation, and non-contact Atomic Force Microscopy (AFM) using a CO-functionalized tip provides a direct view of the agglomerate structure. Together, these data provide a stringent test of the minimum energy configurations determined via a van der Waals density functional theory (DFT)-based genetic search. △ Less

Submitted 29 January, 2018; originally announced January 2018.

Comments: 6 figures, includes SI

An Atomic-Scale View of CO and H2 Oxidation on a Pt-Fe3O4 Model Catalyst

Authors: Roland Bliem, Jessi van der Hoeven, Adam Zavodny, Oscar Gamba, Jiri Pavelec, Petra de Jongh, Michael Schmid, Ulrike Diebold, Gareth S. Parkinson

Abstract: Metal-support interactions are frequently invoked to explain the enhanced catalytic activity of metal nanoparticles dispersed over reducible metal-oxide supports, yet the atomic scale mechanisms are rarely known. Here, we use scanning tunneling microscopy to study a Pt1-6/Fe3O4 model catalyst exposed to CO, H2, O2, and mixtures thereof, at 550 K. CO extracts lattice oxygen at the cluster perimeter… ▽ More Metal-support interactions are frequently invoked to explain the enhanced catalytic activity of metal nanoparticles dispersed over reducible metal-oxide supports, yet the atomic scale mechanisms are rarely known. Here, we use scanning tunneling microscopy to study a Pt1-6/Fe3O4 model catalyst exposed to CO, H2, O2, and mixtures thereof, at 550 K. CO extracts lattice oxygen at the cluster perimeter to form CO2, creating large holes in the metal-oxide surface. H2 and O2 dissociate on the metal clusters and spill over onto the support. The former creates create surface hydroxyl groups, which react with the support to desorb water, while atomic oxygen reacts with Fe from the bulk to create new Fe3O4(001) islands. The presence of the Pt is crucial because it catalyses reactions that already occur on the bare iron-oxide surface, but at higher temperatures. △ Less

Submitted 13 February, 2017; originally announced February 2017.

Journal ref: Angewandte Chemie International Edition, Volume 54, Issue 47, November 16, 2015, Page 13999

Printable Nanoscopic Metamaterial Absorbers and Images with Diffraction-Limited Resolution

Authors: Patrizia Richner, Hadi Eghlidi, Stephan J. P. Kress, Martin Schmid, David J. Norris, Dimos Poulikakos

Abstract: The fabrication of functional metamaterials with extreme feature resolution finds a host of applications such as the broad area of surface/light interaction. Non-planar features of such structures can significantly enhance their performance and tunability, but their facile generation remains a challenge. Here, we show that carefully designed out-of-plane nanopillars made of metal-dielectric compos… ▽ More The fabrication of functional metamaterials with extreme feature resolution finds a host of applications such as the broad area of surface/light interaction. Non-planar features of such structures can significantly enhance their performance and tunability, but their facile generation remains a challenge. Here, we show that carefully designed out-of-plane nanopillars made of metal-dielectric composites integrated in a metal-dielectric-nanocomposite configuration, can absorb broadband light very effectively. We further demonstrate that electrohydrodynamic printing in a rapid nanodrip** mode, is able to generate precise out-of-plane forests of such composite nanopillars with deposition resolutions at the diffraction limit on flat and non-flat substrates. The nanocomposite nature of the printed material allows the fine-tuning of the overall visible light absorption from complete absorption to complete reflection by simply tuning the pillar height. Almost perfect absorption (~95%) over the entire visible spectrum is achieved by a nanopillar forest covering only 6% of the printed area. Adjusting the height of individual pillar groups by design, we demonstrate on-demand control of the gray scale of a micrograph with a spatial resolution of 400 nm. These results constitute a significant step forward in ultra-high resolution facile fabrication of out-of-plane nanostructures, important to a broad palette of light design applications. nanostructures, important to a broad palette of light design applications. △ Less

Submitted 23 September, 2016; originally announced September 2016.

Journal ref: ACS applied materials & interfaces 8 (2016) 11690-11697

The spheronic toy universe: how special relativity may be visualized to emerge from a wave-nature of matter

Authors: Manfred Schmid, Pavel Kroupa

Abstract: We construct an idealized universe for didactic purposes. This universe is assumed to consist of absolute Euclidean space and to be filled with a classical medium which allows for sound waves. A known solution to the wave equation describing the dynamics of the medium is a standing spherical wave. Although this is a problem of classical mechanics, we demonstrate that the Lorentz transformation is… ▽ More We construct an idealized universe for didactic purposes. This universe is assumed to consist of absolute Euclidean space and to be filled with a classical medium which allows for sound waves. A known solution to the wave equation describing the dynamics of the medium is a standing spherical wave. Although this is a problem of classical mechanics, we demonstrate that the Lorentz transformation is required to generate a moving solution from the stationary one. Both solutions are here collectively referred to as "spherons". These spherons exhibit properties which have analogues in the physical description of matter with rest mass, among them de Broglie like phase waves and at the same time "relativistic" effects such as contraction and a speed limit. This leads to a theory of special relativity by assuming the point of view of an observer made of such spheronic "matter". The argument made here may thus be useful as a visualisation or didactic approach to the real universe, in which matter has wave-like properties and obeys the laws of special relativity. △ Less

Submitted 5 August, 2014; originally announced August 2014.

Comments: LaTeX, 13 pages, 3 figures, PASA, in press

Calculation of Energy Band Diagram of a Photoelectrochemical Water Splitting Cell

Authors: P. Cendula, S. D. Tilley, S. Gimenez, M. Schmid, J. Bisquert, M. Graetzel, J. O. Schumacher

Abstract: A physical model is presented for a semiconductor electrode of a photoelectrochemical (PEC) cell, accounting for the potential drop in the Helmholtz layer. Hence both band edge pinning and unpinning are naturally included in our description. The model is based on the continuity equations for charge carriers and direct charge transfer from the energy bands to the electrolyte. A quantitative calcula… ▽ More A physical model is presented for a semiconductor electrode of a photoelectrochemical (PEC) cell, accounting for the potential drop in the Helmholtz layer. Hence both band edge pinning and unpinning are naturally included in our description. The model is based on the continuity equations for charge carriers and direct charge transfer from the energy bands to the electrolyte. A quantitative calculation of the position of the energy bands and the variation of the quasi-Fermi levels in the semiconductor with respect to the water reduction and oxidation potentials is presented. Calculated current-voltage curves are compared with established analytical models and measurement. Our model calculations are suitable to enhance understanding and improve properties of semiconductors for photoelectrochemical water splitting. △ Less

Submitted 22 July, 2014; originally announced July 2014.

Comments: 20 pages single column, 5 figures, 2 tables, submission to ACS

Design Principles for Plasmonic Nanoparticle Devices

Authors: Phillip Manley, Sven Burger, Frank Schmidt, Martina Schmid

Abstract: For all applications of plasmonics to technology it is required to tailor the resonance to the optical system in question. This chapter gives an understanding of the design considerations for nanoparticles needed to tune the resonance. First the basic concepts of plasmonics are reviewed with a focus on the physics of nanoparticles. An introduction to the finite element method is given with emphasi… ▽ More For all applications of plasmonics to technology it is required to tailor the resonance to the optical system in question. This chapter gives an understanding of the design considerations for nanoparticles needed to tune the resonance. First the basic concepts of plasmonics are reviewed with a focus on the physics of nanoparticles. An introduction to the finite element method is given with emphasis on the suitability of the method to nanoplasmonic device simulation. The effects of nanoparticle shape on the spectral position and lineshape of the plasmonic resonance are discussed including retardation and surface curvature effects. The most technologically important plasmonic materials are assessed for device applicability and the importance of substrates in light scattering is explained. Finally the application of plasmonic nanoparticles to photovoltaic devices is discussed. △ Less

Submitted 31 March, 2014; originally announced March 2014.

Comments: 29 pages, 15 figures, part of an edited book: "Linear and Non-Linear Nanoplasmonics"

Journal ref: Progress in Nonlinear Nano-Optics, S. Sakabe, et al., Eds., Springer (2015), pp. 223 - 247

CO Induced Adatom Sintering in a Model Catalyst: Pd/Fe3O4

Authors: Gareth S. Parkinson, Zbynek Novotny, Giacomo Argentero, Michael Schmid, Jiří Pavelec, Rukan Kosak, Peter Blaha, Ulrike Diebold

Abstract: The coarsening of catalytically-active metal clusters is often accelerated by the presence of gases through the formation of mobile intermediates, though the exact mechanism through which this happens is often subject to debate. We use scanning tunneling microscopy (STM) to follow the CO induced coalescence of Pd adatoms supported on the Fe3O4(001) surface at room temperature. We show that highly-… ▽ More The coarsening of catalytically-active metal clusters is often accelerated by the presence of gases through the formation of mobile intermediates, though the exact mechanism through which this happens is often subject to debate. We use scanning tunneling microscopy (STM) to follow the CO induced coalescence of Pd adatoms supported on the Fe3O4(001) surface at room temperature. We show that highly-mobile Pd-carbonyl species, formed via the so-called skyhook effect, are temporarily trapped at other Pd adatoms. Once these reach a critical density, clusters nucleate; subsequent coarsening occurs through cluster diffusion and coalescence. While CO increases the mobility in the Pd/Fe3O4 system, surface hydroxyls have the opposite effect. Pd atoms transported to surface OH groups are no longer susceptible to the skyhook effect and remain isolated. Following the evolution from well-dispersed metal adatoms into clusters, atom-by-atom, allows identification of the key processes that underlie gas-induced mass transport. △ Less

Submitted 4 March, 2013; originally announced March 2013.

Comments: 16 pages, 4 figures

Journal ref: Nature Materials 12, 724 (2013)

Coupling of vector fields at high energies

Authors: Michael L. Schmid

Abstract: In general relativity and electrodynamics fields are always generated from static monopoles (like mass or electric charge) or their corresponding currents by surrounding them in a spherical configuration. We investigate a generation of fields from primary fields by a scalar coupling. The generated secondary fields fulfill the condition of source-freedom and therefore cannot occur in a spherical… ▽ More In general relativity and electrodynamics fields are always generated from static monopoles (like mass or electric charge) or their corresponding currents by surrounding them in a spherical configuration. We investigate a generation of fields from primary fields by a scalar coupling. The generated secondary fields fulfill the condition of source-freedom and therefore cannot occur in a spherical configuration. The coupling strength depends on the energies of the primary fields. In most cases these fields can be approximately considered as dipole fields. We discuss two applications of couplings for electromagnetic and gravitational spin-1 fields and for electric and magnetic fields. We calculate for both applications the threshold values of field energy for the maximum coupling strength. The proposed approach yields to a further step towards an unification of electromagnetism and gravitation and has important consequences for the discrete symmetries. △ Less

Submitted 22 April, 2001; v1 submitted 30 November, 1999; originally announced November 1999.

Comments: 20 pages, no figures