-
An Event Plane Detector for STAR -- Construction Proposal 2016
Authors:
Alex Schmah,
Rosi Reed,
Michael Lisa
Abstract:
This is the construction proposal for the STAR Event Plane Detector (EPD). It discusses design considerations, simulations, and physics motivations for the device. It also covers other important details such as connector construction, cost schedule and radiation hardness of the epoxy. This proposal was submitted to STAR in May 2016 and approved shortly thereafter. The device was subsequently const…
▽ More
This is the construction proposal for the STAR Event Plane Detector (EPD). It discusses design considerations, simulations, and physics motivations for the device. It also covers other important details such as connector construction, cost schedule and radiation hardness of the epoxy. This proposal was submitted to STAR in May 2016 and approved shortly thereafter. The device was subsequently constructed and installed into STAR. The design evolved somewhat between the proposal and final construction, but this document contains useful details not found elsewhere. A manuscript detailing the device as constructed has been posted at arXiv:1912.05243.
△ Less
Submitted 23 February, 2020;
originally announced February 2020.
-
The STAR Event Plane Detector
Authors:
Joseph Adams,
Annika Ewigleben,
Sierra Garrett,
Wanbing He,
Te-Chuan Huang,
Peter M. Jacobs,
Xinyue Ju,
Michael A. Lisa,
Michael Lomnitz,
Robert Pak,
Rosi Reed,
Alexander Schmah,
Prashanth Shanmuganathan,
Ming Shao,
Xu Sun,
Isaac Upsal,
Gerard Visser,
**long Zhang
Abstract:
The Event Plane Detector (EPD) is an upgrade detector to the STAR experiment at RHIC, designed to measure the pattern of forward-going charged particles emitted in a high-energy collision between heavy nuclei. It consists of two highly-segmented disks of 1.2-cm-thick scintillator embedded with wavelength-shifting fiber, coupled to silicon photomultipliers and custom electronics. We describe the ge…
▽ More
The Event Plane Detector (EPD) is an upgrade detector to the STAR experiment at RHIC, designed to measure the pattern of forward-going charged particles emitted in a high-energy collision between heavy nuclei. It consists of two highly-segmented disks of 1.2-cm-thick scintillator embedded with wavelength-shifting fiber, coupled to silicon photomultipliers and custom electronics. We describe the general design of the device, its construction, and performance on the bench and in the experiment.
△ Less
Submitted 17 April, 2020; v1 submitted 11 December, 2019;
originally announced December 2019.
-
A next-generation LHC heavy-ion experiment
Authors:
D. Adamová,
G. Aglieri Rinella,
M. Agnello,
Z. Ahammed,
D. Aleksandrov,
A. Alici,
A. Alkin,
T. Alt,
I. Altsybeev,
D. Andreou,
A. Andronic,
F. Antinori,
P. Antonioli,
H. Appelshäuser,
R. Arnaldi,
I. C. Arsene,
M. Arslandok,
R. Averbeck,
M. D. Azmi,
X. Bai,
R. Bailhache,
R. Bala,
L. Barioglio,
G. G. Barnaföldi,
L. S. Barnby
, et al. (374 additional authors not shown)
Abstract:
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th…
▽ More
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.
△ Less
Submitted 2 May, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Radiation Hardness Test of Eljen EJ-500 Optical Cement
Authors:
N. Buechel,
S. Garrett,
M. Lomnitz,
A. Schmah,
X. Sun,
J. Van Dyke,
J. Xu,
J. Zhang
Abstract:
We present a comprehensive account of the proton radiation hardness of Eljen Technology's EJ-500 optical cement used in the construction of experiment detectors. The cement was embedded into five plastic scintillator tiles which were each exposed to one of five different levels of radiation by a 50 MeV proton beam produced at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. A cosmic…
▽ More
We present a comprehensive account of the proton radiation hardness of Eljen Technology's EJ-500 optical cement used in the construction of experiment detectors. The cement was embedded into five plastic scintillator tiles which were each exposed to one of five different levels of radiation by a 50 MeV proton beam produced at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. A cosmic ray telescope setup was used to measure signal amplitudes before and after irradiation. Another post-radiation measurement was taken four months after the experiment to investigate whether the radiation damage to the cement recovers after a short amount of time. We verified that the radiation damage to the tiles increased with increasing dose but showed significant improvement after the four months time interval.
△ Less
Submitted 29 March, 2017;
originally announced March 2017.
-
Event plane resolution correction for azimuthal anisotropy in wide centrality bins
Authors:
Hiroshi Masui,
Alexander Schmah,
Art Poskanzer
Abstract:
We provide a method to correct the observed azimuthal anisotropy in heavy-ion collisions for the event plane resolution in a wide centrality bin. This new procedure is especially useful for rare particles, such as Omega baryons and J/psi mesons, which are difficult to measure in small intervals of centrality. Based on a Monte Carlo calculation with simulated v_2 and multiplicity, we show that some…
▽ More
We provide a method to correct the observed azimuthal anisotropy in heavy-ion collisions for the event plane resolution in a wide centrality bin. This new procedure is especially useful for rare particles, such as Omega baryons and J/psi mesons, which are difficult to measure in small intervals of centrality. Based on a Monte Carlo calculation with simulated v_2 and multiplicity, we show that some of the commonly used methods have a bias of up to 15%.
△ Less
Submitted 25 July, 2016; v1 submitted 14 December, 2012;
originally announced December 2012.
-
Development of a GEM-TPC prototype
Authors:
Heinz Angerer,
Reinhard Beck,
Martin Berger,
Felix Boehmer,
K. -T. Brinkmann,
Paul Buehler,
Michael Carnegie,
Sverre Dorheim,
Laura Fabbietti,
Chr. Funke,
F. Cusanno,
Joerg Hehner,
Andreas Heinz,
Markus Henske,
Christian Hoeppner,
David Kaiser,
Bernhard Ketzer,
Igor Konorov,
Jochen Kunkel,
Michael Lang,
Johann Marton,
Sebastian Neubert,
Stephan Paul,
Alexander Schmah,
Christian Schmidt
, et al. (15 additional authors not shown)
Abstract:
The use of GEM foils for the amplification stage of a TPC instead of a con- ventional MWPC allows one to bypass the necessity of gating, as the backdrift is suppressed thanks to the asymmetric field configuration. This way, a novel continuously running TPC, which represents one option for the PANDA central tracker, can be realized. A medium sized prototype with a diameter of 300 mm and a length…
▽ More
The use of GEM foils for the amplification stage of a TPC instead of a con- ventional MWPC allows one to bypass the necessity of gating, as the backdrift is suppressed thanks to the asymmetric field configuration. This way, a novel continuously running TPC, which represents one option for the PANDA central tracker, can be realized. A medium sized prototype with a diameter of 300 mm and a length of 600 mm will be tested inside the FOPI spectrometer at GSI using a carbon or lithium beam at intermediate energies (E = 1-3AGeV). This detector test under realistic experimental conditions should allow us to verify the spatial resolution for single tracks and the reconstruction capability for displaced vertexes. A series of physics measurement implying pion beams is scheduled with the FOPI spectrometer together with the GEM-TPC as well.
△ Less
Submitted 4 November, 2009;
originally announced November 2009.
