-
Fabrication of low-loss III-V Bragg-reflection waveguides for parametric down-conversion
Authors:
Hannah Thiel,
Marita Wagner,
Bianca Nardi,
Alexander Schlager,
Robert J. Chapman,
Stefan Frick,
Holger Suchomel,
Martin Kamp,
Sven Höfling,
Christian Schneider,
Gregor Weihs
Abstract:
Entangled photon pairs are an important resource for quantum cryptography schemes that go beyond point-to-point communication. Semiconductor Bragg-reflection waveguides are a promising photon-pair source due to mature fabrication, integrability, large transparency window in the telecom wavelength range, integration capabilities for electro-optical devices as well as a high second-order nonlinear c…
▽ More
Entangled photon pairs are an important resource for quantum cryptography schemes that go beyond point-to-point communication. Semiconductor Bragg-reflection waveguides are a promising photon-pair source due to mature fabrication, integrability, large transparency window in the telecom wavelength range, integration capabilities for electro-optical devices as well as a high second-order nonlinear coefficient. To increase performance we improved the fabrication of Bragg-reflection waveguides by employing fixed-beam-moving-stage optical lithography, low pressure and low chlorine concentration etching, and resist reflow. The reduction in sidewall roughness yields a low optical loss coefficient for telecom wavelength light of alpha_reflow = 0.08(6)mm^(-1). Owing to the decreased losses, we achieved a photon pair production rate of 8800(300)(mW*s*mm)^(-1) which is 15-fold higher than in previous samples.
△ Less
Submitted 2 September, 2023;
originally announced September 2023.
-
A practical guide to loss measurements using the Fourier transform of the transmission spectrum
Authors:
Hannah Thiel,
Bianca Nardi,
Alexander Schlager,
Stefan Frick,
Gregor Weihs
Abstract:
Analyzing the internal loss characteristics and multimodedness of (integrated) optical devices can prove difficult. One technique to recover this information is to Fourier transform the transmission spectrum of optical components. This article gives instruction on how to perform the transmission measurement, prepare the data, and interpret the Fourier spectrum. Our guide offers insights into the i…
▽ More
Analyzing the internal loss characteristics and multimodedness of (integrated) optical devices can prove difficult. One technique to recover this information is to Fourier transform the transmission spectrum of optical components. This article gives instruction on how to perform the transmission measurement, prepare the data, and interpret the Fourier spectrum. Our guide offers insights into the influence of sampling, windowing, zero padding as well as Fourier spectrum peak heights and shapes which are previously neglected in the literature but have considerable impact on the results of the method. For illustration, we apply the method to a Bragg-reflection waveguide. We find that the waveguide is multimodal with two modes having very similar group refractive indices but different optical losses.
△ Less
Submitted 2 September, 2023;
originally announced September 2023.
-
Difference-frequency generation in an AlGaAs Bragg-reflection waveguide using an on-chip electrically-pumped quantum dot laser
Authors:
A. Schlager,
M. Götsch,
R. J. Chapman,
S. Frick,
H. Thiel,
H. Suchomel,
M. Kamp,
S. Höfling,
C. Schneider,
G. Weihs
Abstract:
Nonlinear frequency conversion is ubiquitous in laser engineering and quantum information technology. A long-standing goal in photonics is to integrate on-chip semiconductor laser sources with nonlinear optical components. Engineering waveguide lasers with spectra that phase-match to nonlinear processes on the same device is a formidable challenge. Here, we demonstrate difference-frequency generat…
▽ More
Nonlinear frequency conversion is ubiquitous in laser engineering and quantum information technology. A long-standing goal in photonics is to integrate on-chip semiconductor laser sources with nonlinear optical components. Engineering waveguide lasers with spectra that phase-match to nonlinear processes on the same device is a formidable challenge. Here, we demonstrate difference-frequency generation in an AlGaAs Bragg reflection waveguide which incorporates the gain medium for the pump laser in its core. We include quantum dot layers in the AlGaAs waveguide that generate electrically driven laser light at ~790 nm, and engineer the structure to facilitate nonlinear processes at this wavelength. We perform difference-frequency generation between 1540 nm and 1630 nm using the on-chip laser, which is enabled by the broad modal phase-matching of the AlGaAs waveguide, and measure normalized conversion efficiencies up to $(0.64\pm0.21)$ %/W/cm$^2$. Our work demonstrates a pathway towards devices that utilize on-chip active elements and strong optical nonlinearities to enable highly integrated photonic systems-on-chip.
△ Less
Submitted 7 February, 2022; v1 submitted 20 January, 2021;
originally announced January 2021.
-
Understanding photoluminescence in semiconductor Bragg-reflection waveguides: Towards an integrated, GHz-rate telecom photon pair source
Authors:
Silke Auchter,
Alexander Schlager,
Hannah Thiel,
Kaisa Laiho,
Benedikt Pressl,
Holger Suchomel,
Martin Kamp,
Sven Höfling,
Christian Schneider,
Gregor Weihs
Abstract:
Compared to traditional nonlinear optical crystals, like BaB$_2$O$_4$, KTiOPO$_4$ or LiNbO$_3$, semiconductor integrated sources of photon pairs may operate at pump wavelengths much closer to the bandgap of the materials. This is also the case for Bragg-reflection waveguides (BRW) targeting parametric down-conversion (PDC) to the telecom C-band. The large nonlinear coefficient of the AlGaAs alloy…
▽ More
Compared to traditional nonlinear optical crystals, like BaB$_2$O$_4$, KTiOPO$_4$ or LiNbO$_3$, semiconductor integrated sources of photon pairs may operate at pump wavelengths much closer to the bandgap of the materials. This is also the case for Bragg-reflection waveguides (BRW) targeting parametric down-conversion (PDC) to the telecom C-band. The large nonlinear coefficient of the AlGaAs alloy and the strong confinement of the light enable extremely bright integrated photon pair sources. However, under certain circumstances, a significant amount of detrimental broadband photoluminescence has been observed in BRWs. We show that this is mainly a result of linear absorption near the core and subsequent radiative recombination of electron-hole pairs at deep impurity levels in the semiconductor. For PDC with BRWs, we conclude that devices operating near the long wavelength end of the S-band or the short C-band require temporal filtering shorter than 1 ns. We predict that shifting the operating wavelengths to the L-band and making small adjustments in the material composition will reduce the amount of photoluminescence to negligible values. Such measures enable us to increase the average pump power and/or the repetition rate, which makes integrated photon pair sources with on-chip multi-gigahertz pair rates feasible.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
Optimizing the spectro-temporal properties of photon pairs from Bragg-reflection waveguides
Authors:
H. Chen,
K. Laiho,
B. Pressl,
A. Schlager,
H. Suchomel,
M. Kamp,
S. Höfling,
C. Schneider,
G. Weihs
Abstract:
Bragg-reflection waveguides (BRWs) fabricated from AlGaAs provide an interesting non-linear optical platform for photon-pair generation via parametric down-conversion (PDC). In contrast to many conventional PDC sources, BRWs are made of high refractive index materials and their characteristics are very sensitive to the underlying layer structure. First, we show that the design parameters like the…
▽ More
Bragg-reflection waveguides (BRWs) fabricated from AlGaAs provide an interesting non-linear optical platform for photon-pair generation via parametric down-conversion (PDC). In contrast to many conventional PDC sources, BRWs are made of high refractive index materials and their characteristics are very sensitive to the underlying layer structure. First, we show that the design parameters like the phasematching wavelength and the group refractive indices of the interacting modes can be reliably controlled even in the presence of fabrication tolerances. We then investigate, how these characteristics can be taken advantage of when designing quantum photonic applications with BRWs. We especially concentrate on achieving a small differential group delay between the generated photons of a pair and then explore the performance of our design when realizing a Hong-Ou-Mandel interference experiment or generating spectrally multi-band polarization entangled states. Our results show that the versatility provided by engineering the dispersion in BRWs is important for employing them in different quantum optics tasks.
△ Less
Submitted 3 March, 2019; v1 submitted 10 September, 2018;
originally announced September 2018.
-
Uncovering dispersion properties in semiconductor waveguides to study photon-pair generation
Authors:
K. Laiho,
B. Pressl,
A. Schlager,
H. Suchomel,
M. Kamp,
S. Höfling,
C. Schneider,
G. Weihs
Abstract:
We investigate the dispersion properties of ridge Bragg-reflection waveguides to deduce their phasematching characteristics. These are crucial for exploiting them as sources of parametric down-conversion (PDC). In order to estimate the phasematching bandwidth we first determine the group refractive indices of the interacting modes via Fabry-Perot experiments in two distant wavelength regions. Seco…
▽ More
We investigate the dispersion properties of ridge Bragg-reflection waveguides to deduce their phasematching characteristics. These are crucial for exploiting them as sources of parametric down-conversion (PDC). In order to estimate the phasematching bandwidth we first determine the group refractive indices of the interacting modes via Fabry-Perot experiments in two distant wavelength regions. Second, by measuring the spectra of the emitted PDC photons we gain access to their group index dispersion. Our results offer a simple approach for determining the PDC process parameters in the spectral domain and provide an important feedback for designing such sources, especially in the broadband case.
△ Less
Submitted 26 September, 2016; v1 submitted 2 May, 2016;
originally announced May 2016.
