-
Comparison of optical spectra between asteroids Ryugu and Bennu: II. High-precision analysis for space weathering trends
Authors:
K. Yumoto,
E. Tatsumi,
T. Kouyama,
D. R. Golish,
Y. Cho,
T. Morota,
S. Kameda,
H. Sato,
B. Rizk,
D. N. DellaGiustina,
Y. Yokota,
H. Suzuki,
J. de León,
H. Campins,
J. Licandro,
M. Popescu,
J. L. Rizos,
R. Honda,
M. Yamada,
N. Sakatani,
C. Honda,
M. Matsuoka,
M. Hayakawa,
H. Sawada,
K. Ogawa
, et al. (3 additional authors not shown)
Abstract:
The influence of space weathering on the observed spectra of C-complex asteroids remains uncertain. This has long hindered our understanding of their composition through telescope observations. Multi-band imaging of Ryugu by ONC-T on Hayabusa2 and that of Bennu by MapCam on OSIRIS-REx found opposite spectral trends of space weathering; Ryugu darkened/reddened while Bennu brightened/blued. How the…
▽ More
The influence of space weathering on the observed spectra of C-complex asteroids remains uncertain. This has long hindered our understanding of their composition through telescope observations. Multi-band imaging of Ryugu by ONC-T on Hayabusa2 and that of Bennu by MapCam on OSIRIS-REx found opposite spectral trends of space weathering; Ryugu darkened/reddened while Bennu brightened/blued. How the spectra of Ryugu and Bennu evolved relative to each other would place a constraint for understanding their origins and evolutions. In this study, we compared the space weathering trends on Ryugu and Bennu by applying the results of cross calibration between ONC-T and MapCam. We show that the average Bennu surface is brighter by 18.0 $\pm$ 1.5% at 550 nm and bluer by 0.18 $\pm$ 0.03 $μ$m$^{-1}$ (480-850 nm slope) than Ryugu. The spectral slopes of surface materials are more uniform on Bennu than on Ryugu at spatial scales $\gtrsim$1 m, but Bennu is more heterogeneous at $\lesssim$1 m. This suggests that lateral mixing due to resurfacing may have been more efficient on Bennu. The reflectance-spectral slope distributions of craters on Ryugu and Bennu appeared to follow two trend lines with an offset before cross calibration, but they converged to a single straight trend without a bend after cross calibration. We show that the spectra of the freshest craters on Ryugu and Bennu are indistinguishable within the uncertainty of cross calibration. These results suggest that Ryugu and Bennu initially had similar spectra before space weathering and that they evolved in completely opposite directions along the same trend line, subsequently evolving into asteroids with different disk-averaged spectra. These findings further suggest that space weathering likely expanded the spectral slope variation of C-complex asteroids, implying that they may have formed from materials with more uniform spectral slopes.
△ Less
Submitted 7 July, 2024;
originally announced July 2024.
-
Single-Shot Laser-Driven Neutron Resonance Spectroscopy for Temperature Profiling
Authors:
Zechen Lan,
Yasunobu Arikawa,
S. Reza Mirfayzi,
Alessio Morace,
Takehito Hayakawa,
Hirotaka Sato,
Takashi Kamiyama,
Tianyun Wei,
Yuta Tatsumi,
Mitsuo Koizumi,
Yuki Abe,
Shinsuke Fujioka,
Kunioki Mima,
Ryosuke Kodama,
Akifumi Yogo
Abstract:
The temperature measurement of material inside of an object is one of the key technologies for control of dynamical processes. For this purpose, various techniques such as laser-based thermography and phase-contrast imaging thermography have been studied. However, it is, in principle, impossible to measure the temperature of an element inside of an object using these techniques. One of the possibl…
▽ More
The temperature measurement of material inside of an object is one of the key technologies for control of dynamical processes. For this purpose, various techniques such as laser-based thermography and phase-contrast imaging thermography have been studied. However, it is, in principle, impossible to measure the temperature of an element inside of an object using these techniques. One of the possible solutions is measurements of Doppler brooding effect in neutron resonance absorption (NRA). Here we present a method to measure the temperature of an element or an isotope inside of an object using NRA with a single neutron pulse of approximately 100 ns width provided from a high-power laser. We demonstrate temperature measurements of a tantalum (Ta) metallic foil heated from the room temperature up to 617 K. Although the neutron energy resolution is fluctuated from shot to shot, we obtain exactly the temperature using a reference of a silver (Ag) foil kept to the room temperature. A free gas model well reproduces the results. This method enables element(isotope)-sensitive thermometry to detect the instantaneous temperature rise in dynamical processes.
△ Less
Submitted 3 October, 2023; v1 submitted 2 October, 2023;
originally announced October 2023.
-
Melting of excitonic insulator phase by an intense terahertz pulse in Ta$_2$NiSe$_5$
Authors:
Naoki Takamura,
Tatsuya Miyamoto,
Ryohei Ikeda,
Tetsushi Kubo,
Masaki Yamamoto,
Hiroki Sato,
Yang Han,
Takayuki Ito,
Tetsu Sato,
Akitoshi Nakano,
Hiroshi Sawa,
Hiroshi Okamoto
Abstract:
In this study, the optical response to a terahertz pulse was investigated in the transition metal chalcogenide Ta$_2$NiSe$_5$, a candidate excitonic insulator. First, by irradiating a terahertz pulse with a relatively weak electric field (0.3 MV/cm), the spectral changes in reflectivity near the absorption edge due to third-order optical nonlinearity were measured and the absorption peak character…
▽ More
In this study, the optical response to a terahertz pulse was investigated in the transition metal chalcogenide Ta$_2$NiSe$_5$, a candidate excitonic insulator. First, by irradiating a terahertz pulse with a relatively weak electric field (0.3 MV/cm), the spectral changes in reflectivity near the absorption edge due to third-order optical nonlinearity were measured and the absorption peak characteristic of the excitonic phase just below the interband transition was identified. Next, by irradiating a strong terahertz pulse with a strong electric field of 1.65 MV/cm, the absorption of the excitonic phase was found to be reduced, and a Drude-like response appeared in the mid-infrared region. These responses can be interpreted as carrier generation by exciton dissociation induced by the electric field, resulting in the partial melting of the excitonic phase and metallization. The presence of a distinct threshold electric field for carrier generation indicates exciton dissociation via quantum-tunnelling processes. The spectral change due to metallization by the electric field is significantly different from that due to the strong optical excitation across the gap, which can be explained by the different melting mechanisms of the excitonic phase in the two types of excitations.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Silicon tracker array for RIB experiments at SAMURAI
Authors:
A. I. Stefanescu,
V. Panin,
L. Trache,
T. Motobayashi,
H. Otsu,
A. Saastamoinen,
T. Uesaka,
L. Stuhl,
J. Tanaka,
D. Tudor,
I. C. Stefanescu,
A. E. Spiridon,
K. Yoneda,
H. Baba,
M. Kurokawa,
Y. Togano,
Z. Halasz,
M. Sasano,
S. Ota,
Y. Kubota,
D. S. Ahn,
T. Kobayashi,
Z. Elekes,
N. Fukuda,
H. Takeda
, et al. (27 additional authors not shown)
Abstract:
This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions o…
▽ More
This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions of interest for nuclear astrophysics. The technical characteristics of the tracking array are described in detail as are its performance in two pilot experiments. The physics justification for such a system is also presented.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
On the Existence of Information Bottlenecks in Living and Non-Living Systems
Authors:
Michael Crosscombe,
Hiroki Sato
Abstract:
In many complex systems, we observe that `interesting behaviour' is often the consequence of a system exploiting the existence of an Information Bottleneck (IB). These bottlenecks can occur at different scales, between individuals or components of a system, and sometimes within individuals themselves. Oftentimes, we regard these bottlenecks negatively; as merely the limitations of the individual's…
▽ More
In many complex systems, we observe that `interesting behaviour' is often the consequence of a system exploiting the existence of an Information Bottleneck (IB). These bottlenecks can occur at different scales, between individuals or components of a system, and sometimes within individuals themselves. Oftentimes, we regard these bottlenecks negatively; as merely the limitations of the individual's physiology and something that ought to be overcome when designing and implementing artificial systems. However, we suggest instead that IBs may serve a purpose beyond merely providing a minimally-viable channel for coordination in collective systems. More specifically, we suggest that interesting or novel behaviour occurs when the individuals in a system are constrained or limited in their ability to share information and must discover novel ways to exploit existing mechanisms, which are inherently bottlenecked, rather than circumventing or otherwise avoiding those mechanisms entirely.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
A novel high-current, high-resolution, low-kinetic-energy electron source for inverse photoemission spectroscopy
Authors:
H. Ibach,
H. Sato,
M. Kubo,
F. S. Tautz,
H. Yoshida,
F. C. Bocquet
Abstract:
A high-current electron source for inverse photoemission spectroscopy (IPES) is described. The source comprises a thermal cathode electron emission system, an electrostatic deflector-monochromator, and a lens system for variable kinetic energy (1.6 - 20 eV) at the target. When scaled to the energy resolution, the electron current is an order of magnitude higher than that of previously described el…
▽ More
A high-current electron source for inverse photoemission spectroscopy (IPES) is described. The source comprises a thermal cathode electron emission system, an electrostatic deflector-monochromator, and a lens system for variable kinetic energy (1.6 - 20 eV) at the target. When scaled to the energy resolution, the electron current is an order of magnitude higher than that of previously described electron sources developed in the context of electron energy loss spectroscopy. Surprisingly, the experimentally measured energy resolution turned out to be significantly better than calculated by standard programs, which include the electron-electron repulsion in the continuum approximation. The achieved currents are also significantly higher than predicted. We attribute this "inverse Boersch-effect" to a mechanism of velocity selection in the forward direction by binary electron-electron collisions.
△ Less
Submitted 11 December, 2022;
originally announced December 2022.
-
Measurement of energy differential spectrum of cosmic-ray muons below 400 MeV
Authors:
Hikaru Sato,
Tadahiro Kin,
Andrea Giammanco
Abstract:
Recent applications of cosmic-ray muons require accurate modeling of their flux at low-energy. However, no measurement has been reported below 400 MeV. Therefore, we developed a full-absorption muon energy spectrometer to obtain energy differential flux below 400 MeV. Because our main detector can measure muon energies below 75 MeV, an energy degradation method is adopted (using 5- and 20-cm thick…
▽ More
Recent applications of cosmic-ray muons require accurate modeling of their flux at low-energy. However, no measurement has been reported below 400 MeV. Therefore, we developed a full-absorption muon energy spectrometer to obtain energy differential flux below 400 MeV. Because our main detector can measure muon energies below 75 MeV, an energy degradation method is adopted (using 5- and 20-cm thick lead blocks) to shift the sensitive energy range. Three measurements were performed (in the normal mode and the two energy degrading modes) for 10 and 11 days each. The measurement results were compared with an analytical cosmic-ray model, PARMA (the particle and heavy ion transport code system-based analytical radiation model in the atmosphere) and we found that the model can precisely predict the lower energy part of the flux.
△ Less
Submitted 14 April, 2022;
originally announced April 2022.
-
New metal-plastic hybrid additive manufacturing strategy: Fabrication of arbitrary metal-patterns on external and even internal surfaces of 3D plastic structures
Authors:
Kewei Song,
Yue Cui,
Tiannan Tao,
Xiangyi Meng,
Michinari Sone,
Masahiro Yoshino,
Shinjiro Umezu,
Hirotaka Sato
Abstract:
Constructing precise micro-nano metal patterns on complex three-dimensional (3D) plastic parts allows the fabrication of functional devices for advanced applications. However, this patterning is currently expensive and requires complex processes with long manufacturing lead time. The present work demonstrates a process for the fabrication of micro-nano 3D metal-plastic composite structures with ar…
▽ More
Constructing precise micro-nano metal patterns on complex three-dimensional (3D) plastic parts allows the fabrication of functional devices for advanced applications. However, this patterning is currently expensive and requires complex processes with long manufacturing lead time. The present work demonstrates a process for the fabrication of micro-nano 3D metal-plastic composite structures with arbitrarily complex shapes. In this approach, a light-cured resin is modified to prepare an active precursor capable of allowing subsequent electroless plating (ELP). A multi-material digital light processing 3D printer was newly developed to enable the fabrication of parts containing regions made of either standard resin or active precursor resin nested within each other. Selective 3D ELP processing of such parts provided various metal-plastic composite parts having complicated hollow micro-nano structures with specific topological relationships on a size scale as small as 40 um. Using this technique, 3D metal topologies that cannot be manufactured by traditional methods are possible, and metal patterns can be produced inside plastic parts as a means of further miniaturizing electronic devices. The proposed method can also generate metal coatings exhibiting improved adhesion of metal to plastic substrate. Based on this technique, several sensors composed of different functional nonmetallic materials and specific metal patterns were designed and fabricated. The present results demonstrate the viability of the proposed method and suggest potential applications in the fields of smart 3D micro-nano electronics, 3D wearable devices, micro/nano-sensors, and health care.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
Crystal growth and optical properties of Ce-doped (La,Y)$_2$Si$_2$O$_7$ single crystal
Authors:
Takahiko Horiai,
Juraj Paterek,
Jan Pejchal,
Marketa Jarosova,
Jan Rohlicek,
Shunsuke Kurosawa,
Takashi Hanada,
Masao Yoshino,
Akihiro Yamaji,
Satoshi Toyoda,
Hiroki Sato,
Yuji Ohashi,
Kei Kamada,
Yuui Yokota,
Akira Yoshikawa,
Martin Nikl
Abstract:
We have grown Ce-doped (La,Y)$_2$Si$_2$O$_7$ single crystal by micro-pulling-down method and investigated its optical and scintillation properties. We have successfully prepared the single crystal with (Ce$_{0.015}$La$_{0.600}$Y$_{0.385}$)$_2$Si$_2$O$_7$ composition. The observed thermal quenching process could be characterized by the quenching temperature (T50%) of 526 K and its activation energy…
▽ More
We have grown Ce-doped (La,Y)$_2$Si$_2$O$_7$ single crystal by micro-pulling-down method and investigated its optical and scintillation properties. We have successfully prepared the single crystal with (Ce$_{0.015}$La$_{0.600}$Y$_{0.385}$)$_2$Si$_2$O$_7$ composition. The observed thermal quenching process could be characterized by the quenching temperature (T50%) of 526 K and its activation energy was determined to be 0.62 eV. Further considering the thermal quenching factors, it was found that the thermal quenching was caused by at least the thermal ionization and maybe also by classical thermal quenching. The light output and scintillation decay time were evaluated to be ~12,000 photons/MeV and ~42 ns, respectively. These results indicate that (Ce$_{0.015}$La$_{0.600}$Y$_{0.385}$)$_2$Si$_2$O$_7$ has a great potential for application in scintillation materials.
△ Less
Submitted 20 April, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
Contour Dynamics for One-Dimensional Vlasov-Poisson Plasma with the Periodic Boundary
Authors:
Hiroki Sato,
T. -H. Watanabe,
Shinya Maeyama
Abstract:
We revisit the contour dynamics (CD) simulation method which is applicable to large deformation of distribution function in the Vlasov-Poisson plasma with the periodic boundary, where contours of distribution function are traced without using spatial grids. Novelty of this study lies in application of CD to the one-dimensional Vlasov-Poisson plasma with the periodic boundary condition. A major dif…
▽ More
We revisit the contour dynamics (CD) simulation method which is applicable to large deformation of distribution function in the Vlasov-Poisson plasma with the periodic boundary, where contours of distribution function are traced without using spatial grids. Novelty of this study lies in application of CD to the one-dimensional Vlasov-Poisson plasma with the periodic boundary condition. A major difficulty in application of the periodic boundary is how to deal with contours when they cross the boundaries. It has been overcome by virtue of a periodic Green's function, which effectively introduces the periodic boundary condition without cutting nor reallocating the contours. The simulation results are confirmed by comparing with an analytical solution for the piece-wise constant distribution function in the linear regime and a linear analysis of the Landau dam**. Also, particle trap** by Langmuir wave is successfully reproduced in the nonlinear regime.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
Accessing the conduction band dispersion in CH3NH3PbI3 single crystals
Authors:
**peng Yang,
Haruki Sato,
Hibiki Orio,
Xianjie Liu,
Mats Fahlman,
Nobuo Ueno,
Hiroyuki Yoshida,
Takashi Yamada,
Satoshi Kera
Abstract:
The conduction band structure in methylammonium lead iodide (CH3NH3PbI3) was studied both by angle-resolved two-photon photoemission spectroscopy (AR-2PPE) with low-photon intensity and angle-resolved low-energy inverse photoelectron spectroscopy (AR-LEIPS). Clear energy dispersion of the conduction band along the ΓM direction was observed by these independent methods under different temperatures,…
▽ More
The conduction band structure in methylammonium lead iodide (CH3NH3PbI3) was studied both by angle-resolved two-photon photoemission spectroscopy (AR-2PPE) with low-photon intensity and angle-resolved low-energy inverse photoelectron spectroscopy (AR-LEIPS). Clear energy dispersion of the conduction band along the ΓM direction was observed by these independent methods under different temperatures, and the dispersion was found to be consistent with band calculations under the cubic phase. The effective mass of the electrons at the Γ point was estimated to be (0.20+-0.05)m0 at 90 K. The observed energy position was largely different between the AR-LEIPS and AR-2PPE, demonstrating the electron correlation effects on the band structures. The present results also indicate that the surface structure in CH3NH3PbI3 provides the cubic-dominated electronic property even at lower temperatures.
△ Less
Submitted 23 December, 2020;
originally announced December 2020.
-
Hexagonal Nanopits with the Zigzag Edge State on Graphite Surfaces Synthesized by Hydrogen-Plasma Etching
Authors:
Tomohiro Matsui,
Hideki Sato,
Kazuma Kita,
André E. B. Amend,
Hiroshi Fukuyama
Abstract:
We studied, by scanning tunneling microscopy, the morphology of nanopits of monolayer depth created at graphite surfaces by hydrogen plasma etching under various conditions such as H$_2$ pressure, temperature, etching time, and RF power of the plasma generation. In addition to the known pressure-induced transition of the nanopit morphology, we found a sharp temperature-induced transition from many…
▽ More
We studied, by scanning tunneling microscopy, the morphology of nanopits of monolayer depth created at graphite surfaces by hydrogen plasma etching under various conditions such as H$_2$ pressure, temperature, etching time, and RF power of the plasma generation. In addition to the known pressure-induced transition of the nanopit morphology, we found a sharp temperature-induced transition from many small rather round nanopits of ~150 nm size to few large hexagonal ones of 300-600 nm within a narrow temperature range. The remote and direct plasma modes switching mechanism, which was proposed to explain the pressure-induced transition, is not directly applicable to this newly found transition. Scanning tunneling spectroscopy (STS) measurements of edges of the hexagonal nanopits fabricated at graphite surfaces by this method show clear signatures of the peculiar electronic state localized at the zigzag edge (edge state), i.e., a prominent peak near the Fermi energy accompanied by suppressions on either side in the local density of states. These observations indicate that the hexagonal nanopits consist of a high density of zigzag edges. The STS data also revealed a domain structure of the edge state in which the electronic state varies over a length scale of ~3 nm along the edge. The present study will pave the way for microscopic understanding of the anisotropic etching mechanism and of spin polarization in zigzag nanoribbons which are promising key elements for future graphene nanoelectronics.
△ Less
Submitted 31 July, 2019;
originally announced August 2019.
-
Observation of exotic water in hydrophilic nanospace of porous coordination polymers
Authors:
Tomoaki Ichii,
Takashi Arikawa,
Kenichiro Omoto,
Nobuhiko Hosono,
Hiroshi Sato,
Susumu Kitagawa,
Koichiro Tanaka
Abstract:
The fundamental understanding of water confined in porous coordination polymers (PCPs) is significantly important not only for their applications such as gas storage and separation, but also for exploring the confinement effects in the nanoscale spaces. Here, we report the observation of an exotic water in the well-designed hydrophilic nanopores of PCPs. Single-crystal X-ray diffraction found that…
▽ More
The fundamental understanding of water confined in porous coordination polymers (PCPs) is significantly important not only for their applications such as gas storage and separation, but also for exploring the confinement effects in the nanoscale spaces. Here, we report the observation of an exotic water in the well-designed hydrophilic nanopores of PCPs. Single-crystal X-ray diffraction found that nanoconfined water has an ordered structure that is characteristic in ices, but infrared spectroscopy revealed a significant number of broken hydrogen bonds that is characteristic in liquids. We found that their structural properties are quite similar to those of solid-liquid supercritical water predicted in hydrophobic nanospace at extremely high pressure. Our results will open up not only new potential applications of exotic water in PCPs to control chemical reactions but also experimental systems to clarify the existence of solid-liquid critical points.
△ Less
Submitted 2 March, 2020; v1 submitted 22 March, 2019;
originally announced March 2019.
-
Consideration on the relationship of theoretical ultraviolet cut-off energy with experimental data
Authors:
Kimichika Fukushima,
Hikaru Sato
Abstract:
We formulated a field theory in space-time elements, which are obtained by dividing the space-time continuum into arbitrary-shaped space-time elements, such as hyper-octahedra (orthoplexes), which are aligned locally periodically, without long-range order. Each field is expressed in terms of scalar expansion functions with rotationally covariant coefficients. The cosmological constant was related…
▽ More
We formulated a field theory in space-time elements, which are obtained by dividing the space-time continuum into arbitrary-shaped space-time elements, such as hyper-octahedra (orthoplexes), which are aligned locally periodically, without long-range order. Each field is expressed in terms of scalar expansion functions with rotationally covariant coefficients. The cosmological constant was related to the cut-off energy of the quadratic Higgs self-energy. From the literature, examinations find an experimental break in the cosmic ray energy spectrum called 'knee' at about 3 [PeV], which agrees with this theoretical ultraviolet cut-off energy. Moreover, the expansion functions are updated to plane waves using the Lorentz/Poincaré covariant/invariant inner product of vectors with each four-momentum within the cut-off energy. Due to the long-range disordered alignment of space-time elements, this study newly introduces an effective field, which is not in the standard model and lies within the Planck energy. Particles are then rarely excited to the energy region between the cut-off energy and the Planck energy via extremely weak interaction solely with the effective field. The theoretical ultraviolet cut-off energy is consistent with the experimental phenomena such as the stability of our Universe, inflation in the early Universe and no detection of neutrinos above PeV-order energy.
△ Less
Submitted 5 January, 2023; v1 submitted 23 August, 2018;
originally announced August 2018.
-
Shape anisotropy revisited in single-digit nanometer magnetic tunnel junctions
Authors:
K. Watanabe,
B. **nai,
S. Fukami,
H. Sato,
H. Ohno
Abstract:
Nanoscale magnetic tunnel junction plays a pivotal role in magnetoresistive random access memories. Successful implementation depends on a simultaneous achievement of low switching current for the magnetization switching by spin-transfer torque and high thermal stability, along with a continuous reduction of junction size. Perpendicular-easy-axis CoFeB/MgO stacks possessing interfacial anisotropy…
▽ More
Nanoscale magnetic tunnel junction plays a pivotal role in magnetoresistive random access memories. Successful implementation depends on a simultaneous achievement of low switching current for the magnetization switching by spin-transfer torque and high thermal stability, along with a continuous reduction of junction size. Perpendicular-easy-axis CoFeB/MgO stacks possessing interfacial anisotropy have paved the way down to 20-nm scale, below which a new approach needs to be explored. Here we show magnetic tunnel junctions that satisfy the requirements at ultrafine scale by revisiting shape anisotropy, which is a classical part of magnetic anisotropy but has not been fully utilized in the current perpendicular systems. Magnetization switching solely driven by current is achieved for junctions smaller than 10 nm where sufficient thermal stability is provided by shape anisotropy without adopting new material systems. This work is expected to push forward the development of magnetic tunnel junctions towards single-digit-nm-scale nano-magnetics/spintronics.
△ Less
Submitted 23 December, 2017;
originally announced December 2017.
-
Derivation of the cutoff length from the quantum quadratic enhancement of a mass in vacuum energy constant Lambda
Authors:
Kimichika Fukushima,
Hikaru Sato
Abstract:
Ultraviolet self-interaction energies in field theory sometimes contain meaningful physical quantities. The self-energies in such as classical electrodynamics are usually subtracted from the rest mass. For the consistent treatment of energies as sources of curvature in the Einstein field equations, this study includes these subtracted self-energies into vacuum energy expressed by the constant Lamb…
▽ More
Ultraviolet self-interaction energies in field theory sometimes contain meaningful physical quantities. The self-energies in such as classical electrodynamics are usually subtracted from the rest mass. For the consistent treatment of energies as sources of curvature in the Einstein field equations, this study includes these subtracted self-energies into vacuum energy expressed by the constant Lambda (used in such as Lambda-CDM). In this study, the self-energies in electrodynamics and macroscopic classical Einstein field equations are examined, using the formalisms with the ultraviolet cutoff scheme. One of the cutoff formalisms is the field theory in terms of the step-function-type basis functions, developed by the present authors. The other is a continuum theory of a fundamental particle with the same cutoff length. Based on the effectiveness of the continuum theory with the cutoff length shown in the examination, the dominant self-energy is the quadratic term of the Higgs field at a quantum level (classical self-energies are reduced to logarithmic forms by quantum corrections). The cutoff length is then determined to reproduce today's tiny value of Lambda for vacuum energy. Additionally, a field with nonperiodic vanishing boundary conditions is treated, showing that the field has no zero-point energy.
△ Less
Submitted 1 April, 2018; v1 submitted 15 October, 2017;
originally announced October 2017.
-
Toward construction of a consistent field theory with Poincare covariance in terms of step-function-type basis functions showing confinement/deconfinement, mass-gap and Regge trajectory for non-pure/pure non-Abelian gauge fields
Authors:
Kimichika Fukushima,
Hikaru Sato
Abstract:
This article is a review by the authors concerning the construction of a Poincar${\rm \acute{e}}$ covariant (owing to spacetime continuum) field-theoretic formalism in terms of step-function-type basis functions without ultraviolet divergences. This formalism analytically derives confinement/deconfinement, mass-gap and Regge trajectory for non-Abelian gauge fields, and gives solutions for self-int…
▽ More
This article is a review by the authors concerning the construction of a Poincar${\rm \acute{e}}$ covariant (owing to spacetime continuum) field-theoretic formalism in terms of step-function-type basis functions without ultraviolet divergences. This formalism analytically derives confinement/deconfinement, mass-gap and Regge trajectory for non-Abelian gauge fields, and gives solutions for self-interacting scalar fields. Fields propagate in spacetime continuum and fields with finite degrees of freedom toward continuum limit have no ultraviolet divergence. Basis functions defined in a parameter spacetime are mapped to real spacetime. The authors derive a new solution comprised of classical fields as a vacuum and quantum fluctuations, leading to the linear potential between the particle and antiparticle from the Wilson loop. The Polyakov line gives finite binding energies and reveals the deconfining property at high temperatures. The quantum action yields positive mass from the classical fields and quantum fluctuations produces the Coulomb potential. Pure Yang-Mills fields show the same mass-gap owing to the particle-antiparticle pair creation. The Dirac equation under linear potential is analytically solved in this formalism, reproducing the principal properties of Regge trajectories at a quantum level. Further outlook mentions a possibility of the difference between conventional continuum and present wave functions responsible for the cosmological constant.
△ Less
Submitted 25 July, 2017; v1 submitted 8 May, 2017;
originally announced May 2017.
-
Radiation tolerance of FPCCD vertex detector for the ILC
Authors:
Shunsuke Murai,
Akimasa Ishikawa,
Tomoyuki Sanuki,
Akiya Miyamoto,
Yasuhiro Sugimoto,
Hisao Sato,
Hirokazu Ikeda,
Hitoshi Yamamoto
Abstract:
The Fine Pixel CCD (FPCCD) is one of the candidate sensor technologies for the ILC vertex detector. The vertex detector is located near the interaction point, thus high radiation tolerance is required. Charge transfer efficiency of CCD is degraded by radiation damage which makes traps in pixels. We measured charge transfer inefficiency (CTI) of a neutron irradiated FPCCD prototype. We observed a d…
▽ More
The Fine Pixel CCD (FPCCD) is one of the candidate sensor technologies for the ILC vertex detector. The vertex detector is located near the interaction point, thus high radiation tolerance is required. Charge transfer efficiency of CCD is degraded by radiation damage which makes traps in pixels. We measured charge transfer inefficiency (CTI) of a neutron irradiated FPCCD prototype. We observed a degradation of CTI compared with non-irradiated CCD. To improve the CTI of irradiated CCD, we performed the fat-zero charge injection to fill the traps. In this paper, we report a status of CTI improvement.
△ Less
Submitted 16 March, 2017;
originally announced March 2017.
-
Recent status of FPCCD vertex detector R&D
Authors:
S. Murai,
A. Ishikawa,
T. Sanuki,
A. Miyamoto,
Y. Sugimoto,
C. Constantino,
H. Sato,
H. Ikeda,
Y. Hitoshi
Abstract:
The Fine Pixel CCD (FPCCD) is one of the candidate sensor technologies for the ILC vertex detector. It will be located near interaction point and require high radiation tolerance. It will thus be operated at -40 degree C to improve radiation tolerance. In this paper, we report on the status of neutron radiation tests, on a cooling system using two-phase CO2 with a gas compressor for circulation, a…
▽ More
The Fine Pixel CCD (FPCCD) is one of the candidate sensor technologies for the ILC vertex detector. It will be located near interaction point and require high radiation tolerance. It will thus be operated at -40 degree C to improve radiation tolerance. In this paper, we report on the status of neutron radiation tests, on a cooling system using two-phase CO2 with a gas compressor for circulation, and on the mechanical structure of the FPCCD ladders.
△ Less
Submitted 8 March, 2016; v1 submitted 29 February, 2016;
originally announced March 2016.
-
Development FD-SOI MOSFET amplifiers for integrated read-out circuit of superconducting-tunnel-junction single-photon-detectors
Authors:
Kenji Kiuchi,
Shinhong Kim,
Yuji Takeuchi,
Kenichi Takemasa,
Kazuki Nagata,
Kota Kasahara,
Koya Moriuchi,
Ren Senzaki,
Shunsuke Yagi,
Hirokazu Ikeda,
Shuji Matsuura,
Takehiko Wada,
Hirokazu Ishino,
Atsuko Kibayashi,
Hiromi Sato,
Satoru Mima,
Takuo Yoshida,
Ryuta Hirose,
Yukihiro Kato,
Masasi Hazumi,
Yasuo Arai,
Ikuo Kurachi,
Erik Ramgerg,
Mark Kozlovsky,
Paul Rubinov
, et al. (6 additional authors not shown)
Abstract:
We proposed a new high resolution single photon infrared spectrometer for search for radiative decay of cosmic neutrino background(C$ν$B). The superconducting-tunnel-junctions(STJs) are used as a single photoncounting device. Each STJ consists of Nb/Al/Al${}_{\mathrm{x}}$O${}_{\mathrm{y}}$/Al/Nb layers and their thicknesses are optimized for the operation temperature at 370 mK cooled by a…
▽ More
We proposed a new high resolution single photon infrared spectrometer for search for radiative decay of cosmic neutrino background(C$ν$B). The superconducting-tunnel-junctions(STJs) are used as a single photoncounting device. Each STJ consists of Nb/Al/Al${}_{\mathrm{x}}$O${}_{\mathrm{y}}$/Al/Nb layers and their thicknesses are optimized for the operation temperature at 370 mK cooled by a ${}^{3}$He sorption refrigerator. Our STJs achieved the leak current 250 pA and the measured data implies that a smaller area STJ fulfills our requirement. FD-SOI MOSFETs are employed to amplify the STJ signal current in order to increase signal-to-noise ratio(S/N). FD-SOI MOSFETs can be operated at cryogenic temperature of 370 mK, which reduces the noise of the signal amplification system. FD-SOI MOSFET characteristics are measured at cryogenic temperature. The Id-Vgs curve shows a sharper turn on with a higher threshold voltage and the Id-Vds curve shows a non linear shape in linear region at cryogenic temperature. Taking into account these effects, FD-SOI MOSFETs are available for read-out circuit of STJ detectors. The bias voltage for STJ detectors are 0.4 mV and it must be well stabilized to deliver high performance. We proposed an FD-SOI MOSFET based charge integrated amplifier design as a read-out circuit of STJ detectors. The requirements for an operational amplifier used in the amplifier is estimated using SPICE simulation. The op-amp required to have a fast response(GBW$\geq$100 MHz) and it must have low power dissipation as compared to the cooling power of refrigerator.
△ Less
Submitted 27 July, 2015;
originally announced July 2015.
-
R&D Status of FPCCD Vertex Detector for ILD
Authors:
Yasuhiro Sugimoto,
Hirokazu Ikeda,
Daisuke Kamai,
Eriko Kato,
Akiya Miyamoto,
Hisao Sato,
Hitoshi Yamamoto
Abstract:
Fine pixel CCD (FPCCD) is one of the candidate sensor technologies for the vertex detector used for experiments at the International Linear Collider (ILC). A vertex detector system for the International Large Detector (ILD) using FPCCD sensors has been designed. We report on the R&D status of FPCCD sensors, as well as the vertex detector design for ILD.
Fine pixel CCD (FPCCD) is one of the candidate sensor technologies for the vertex detector used for experiments at the International Linear Collider (ILC). A vertex detector system for the International Large Detector (ILD) using FPCCD sensors has been designed. We report on the R&D status of FPCCD sensors, as well as the vertex detector design for ILD.
△ Less
Submitted 27 February, 2012;
originally announced February 2012.
-
Developement of readout ASIC for FPCCD vertex detector
Authors:
Eriko Kato,
Hisao Sato,
Hirokazu Ikeda,
Yasuhiro Sugimoto,
Kennosuke Itagaki,
Tomoyuki Saito,
Akiya Miyamoto,
Yosuke Takubo,
Hitoshi Yamamoto
Abstract:
One of candidates for the International Linear Collider(ILC)'s vertex detector is the Fine Pixel CCD (FPCCD) with a pixel size of 5 \times 5 (\mum^2). Sensor and readout systems are currently being studied and prototypes have been developed. In this paper we will report on the performance of latest developed readout ASIC prototype as well as the outline of the design strategy for the next ASIC pro…
▽ More
One of candidates for the International Linear Collider(ILC)'s vertex detector is the Fine Pixel CCD (FPCCD) with a pixel size of 5 \times 5 (\mum^2). Sensor and readout systems are currently being studied and prototypes have been developed. In this paper we will report on the performance of latest developed readout ASIC prototype as well as the outline of the design strategy for the next ASIC prototype.
△ Less
Submitted 14 February, 2012;
originally announced February 2012.
-
f-Electron-Nuclear Hyperfine-Coupled Multiplets in the Unconventional Charge Order Phase of Filled Skutterudite PrRu4P12
Authors:
Yuji Aoki,
Takahiro Namiki,
Shanta R. Saha,
Takashi Tayama,
Toshiro Sakakibara,
Ryousuke Shiina,
Hiroyuki Shiba,
Hitoshi Sugawara,
Hideyuki Sato
Abstract:
In the unconventional f-electron-associated charge order phase of filled skutterudite PrRu4P12, the low-temperature behaviors of the triplet crystalline-electric-field ground state of Pr ions have been studied by specific heat and magnetization measurements using high quality single crystals. Specific heat shows an anomalous Schottky-type peak structure at 0.30 K in zero field in spite of the abse…
▽ More
In the unconventional f-electron-associated charge order phase of filled skutterudite PrRu4P12, the low-temperature behaviors of the triplet crystalline-electric-field ground state of Pr ions have been studied by specific heat and magnetization measurements using high quality single crystals. Specific heat shows an anomalous Schottky-type peak structure at 0.30 K in zero field in spite of the absence of any symmetry breaking. Magnetization curve at 0.06 K shows a remarkable rounding below 1 T. It has been revealed that these anomalies provide compelling evidence for the formation of a lattice of Pr 4f-electron-nuclear hyperfine-coupled multiplets, the first known thermodynamical observation of its kind.
△ Less
Submitted 11 May, 2011;
originally announced May 2011.
-
Generalized optical theorems for the reconstruction of Green's function of an inhomogeneous elastic medium
Authors:
Ludovic Margerin,
Haruo Sato
Abstract:
This paper investigates the reconstruction of elastic Green's function from the cross-correlation of waves excited by random noise in the context of scattering theory. Using a general operator equation, -the resolvent formula-, Green's function reconstruction is established when the noise sources satisfy an equipartition condition. In an inhomogeneous medium, the operator formalism leads to genera…
▽ More
This paper investigates the reconstruction of elastic Green's function from the cross-correlation of waves excited by random noise in the context of scattering theory. Using a general operator equation, -the resolvent formula-, Green's function reconstruction is established when the noise sources satisfy an equipartition condition. In an inhomogeneous medium, the operator formalism leads to generalized forms of optical theorem involving the off-shell $T$-matrix of elastic waves, which describes scattering in the near-field. The role of temporal absorption in the formulation of the theorem is discussed. Previously established symmetry and reciprocity relations involving the on-shell $T$-matrix are recovered in the usual far-field and infinitesimal absorption limits. The theory is applied to a point scattering model for elastic waves. The $T$-matrix of the point scatterer incorporating all recurrent scattering loops is obtained by a regularization procedure. The physical significance of the point scatterer is discussed. In particular this model satisfies the off-shell version of the generalized optical theorem. The link between equipartition and Green's function reconstruction in a scattering medium is discussed.
△ Less
Submitted 21 September, 2011; v1 submitted 8 March, 2011;
originally announced March 2011.
-
Design of a Polarised Positron Source Based on Laser Compton Scattering
Authors:
S. Araki,
Y. Higashi,
Y. Honda,
Y. Kurihara,
M. Kuriki,
T. Okugi,
T. Omori,
T. Taniguchi,
N. Terunuma,
J. Urakawa,
X. Artru,
M. Chevallier,
V. Strakhovenko,
E. Bulyak,
P. Gladkikh,
K. Moenig,
R. Chehab,
A. Variola,
F. Zomer,
S. Guiducci,
P. Raimondi,
F. Zimmermann,
K. Sakaue,
T. Hirose,
M. Washio
, et al. (10 additional authors not shown)
Abstract:
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
△ Less
Submitted 15 September, 2005; v1 submitted 2 September, 2005;
originally announced September 2005.
-
First observation of the acceleration of a single bunch by using the induction device in the KEK Proton Synchrotron
Authors:
Ken Takayama,
Kunio Koseki,
Kota Torikai,
Akira Tokuchi,
Eiji Nakamura,
Yoshio Arakida,
Yoshito Shimosaki,
Masayoshi Wake,
Tadaaki Kouno,
Kazuhiko Horioka,
Susumu Igarashi,
Taiki Iwashita,
Atsushi Kawasaki,
Jun-ichi Kishiro,
Makoto Sakuda,
Hikaru Sato,
Makoto Shiho,
Masashi Shirakata,
Tsuyoshi Sueno,
Takeshi Toyama,
Masao Watanabe,
Isao Yamane
Abstract:
A single RF bunch in the KEK proton synchrotron was accelerated with an induction acceleration method from the injection energy of 500 MeV to 5 GeV.
A single RF bunch in the KEK proton synchrotron was accelerated with an induction acceleration method from the injection energy of 500 MeV to 5 GeV.
△ Less
Submitted 1 December, 2004;
originally announced December 2004.
-
Theoretical study on novel electronic properties in nanographite materials
Authors:
Kikuo Harigaya,
Atsushi Yamashiro,
Yukihiro Shimoi,
Katsunori Wakabayashi,
Yousuke Kobayashi,
Naoki Kawatsu,
Kazuyuki Takai,
Hirohiko Sato,
Jerome Ravier,
Toshiaki Enoki,
Morinobu Endo
Abstract:
Antiferromagnetism in stacked nanographite is investigated with using the Hubbard-type model. We find that the open shell electronic structure can be an origin of the decreasing magnetic moment with the decrease of the inter-graphene distance, as experiments on adsorption of molecules suggest. Next, possible charge-separated states are considered using the extended Hubbard model with nearest-nei…
▽ More
Antiferromagnetism in stacked nanographite is investigated with using the Hubbard-type model. We find that the open shell electronic structure can be an origin of the decreasing magnetic moment with the decrease of the inter-graphene distance, as experiments on adsorption of molecules suggest. Next, possible charge-separated states are considered using the extended Hubbard model with nearest-neighbor interactions. The charge-polarized state could appear, when a static electric field is present in the graphene plane for example. Finally, superperiodic patterns with a long distance in a nanographene sheet observed by STM are discussed in terms of the interference of electronic wave functions with a static linear potential theoretically. In the analysis by the k-p model, the oscillation period decreases spatially in agreement with experiments.
△ Less
Submitted 26 September, 2003; v1 submitted 26 May, 2003;
originally announced May 2003.
