-
Arbitrary electro-optic bandwidth and frequency control in lithium niobate optical resonators
Authors:
Jason F. Herrmann,
Devin J. Dean,
Christopher J. Sarabalis,
Vahid Ansari,
Kevin Multani,
E. Alex Wollack,
Timothy P. McKenna,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over reso…
▽ More
In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over resonator frequency and bandwidth on two different devices. We observe up to $\sim50\times$ tuning in the bandwidth over $\sim50$ V with linear frequency control of $\sim230$ MHz/V. We also develop a closed-form model predicting the tuning behavior of the device. This paves the way for rapid phase and amplitude control over light transmitted through our device.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Surface Modification and Coherence in Lithium Niobate SAW Resonators
Authors:
Rachel G. Gruenke,
Oliver A. Hitchcock,
E. Alex Wollack,
Christopher J. Sarabalis,
Marc Jankowski,
Timothy P. McKenna,
Nathan R. Lee,
Amir H. Safavi-Naeini
Abstract:
Lithium niobate is a promising material for develo** quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device p…
▽ More
Lithium niobate is a promising material for develo** quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, x-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.
△ Less
Submitted 26 June, 2023;
originally announced June 2023.
-
High-bandwidth CMOS-voltage-level electro-optic modulation of 780 nm light in thin-film lithium niobate
Authors:
Oguz Tolga Celik,
Christopher J. Sarabalis,
Felix M. Mayor,
Hubert S. Stokowski,
Jason F. Herrmann,
Timothy P. McKenna,
Nathan R. A. Lee,
Wentao Jiang,
Kevin K. S. Multani,
Amir H. Safavi-Naeini
Abstract:
Integrated photonics operating at visible-near-infrared (VNIR) wavelengths offer scalable platforms for advancing optical systems for addressing atomic clocks, sensors, and quantum computers. The complexity of free-space control optics causes limited addressability of atoms and ions, and this remains an impediment on scalability and cost. Networks of Mach-Zehnder interferometers can overcome chall…
▽ More
Integrated photonics operating at visible-near-infrared (VNIR) wavelengths offer scalable platforms for advancing optical systems for addressing atomic clocks, sensors, and quantum computers. The complexity of free-space control optics causes limited addressability of atoms and ions, and this remains an impediment on scalability and cost. Networks of Mach-Zehnder interferometers can overcome challenges in addressing atoms by providing high-bandwidth electro-optic control of multiple output beams. Here, we demonstrate a VNIR Mach-Zehnder interferometer on lithium niobate on sapphire with a CMOS voltage-level compatible full-swing voltage of 4.2 V and an electro-optic bandwidth of 2.7 GHz occupying only 0.35 mm$^2$. Our waveguides exhibit 1.6 dB/cm propagation loss and our microring resonators have intrinsic quality factors of 4.4 $\times$ 10$^5$. This specialized platform for VNIR integrated photonics can open new avenues for addressing large arrays of qubits with high precision and negligible cross-talk.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
Ultra-low-power second-order nonlinear optics on a chip
Authors:
Timothy P. McKenna,
Hubert S. Stokowski,
Vahid Ansari,
Jatadhari Mishra,
Marc Jankowski,
Christopher J. Sarabalis,
Jason F. Herrmann,
Carsten Langrock,
Martin M. Fejer,
Amir H. Safavi-Naeini
Abstract:
Second-order nonlinear optical processes are used to convert light from one wavelength to another and to generate quantum entanglement. Creating chip-scale devices to more efficiently realize and control these interactions greatly increases the reach of photonics. Optical crystals and guided wave devices made from lithium niobate and potassium titanyl phosphate are typically used to realize second…
▽ More
Second-order nonlinear optical processes are used to convert light from one wavelength to another and to generate quantum entanglement. Creating chip-scale devices to more efficiently realize and control these interactions greatly increases the reach of photonics. Optical crystals and guided wave devices made from lithium niobate and potassium titanyl phosphate are typically used to realize second-order processes but face significant drawbacks in scalability, power, and tailorability when compared to emerging integrated photonic systems. Silicon or silicon nitride integrated photonic circuits enhance and control the third-order optical nonlinearity by confining light in dispersion-engineered waveguides and resonators. An analogous platform for second-order nonlinear optics remains an outstanding challenge in photonics. It would enable stronger interactions at lower power and reduce the number of competing nonlinear processes that emerge. Here we demonstrate efficient frequency doubling and parametric oscillation in a thin-film lithium niobate photonic circuit. Our device combines recent progress on periodically poled thin-film lithium niobate waveguidesand low-loss microresonators. Here we realize efficient >10% second-harmonic generation and parametric oscillation with microwatts of optical power using a periodically-poled thin-film lithium niobate microresonator. The operating regimes of this system are controlled using the relative detuning of the intracavity resonances. During nondegenerate oscillation, the emission wavelength is tuned over terahertz by varying the pump frequency by 100's of megahertz. We observe highly-enhanced effective third-order nonlinearities caused by cascaded second-order processes resulting in parametric oscillation. These resonant second-order nonlinear circuits will form a crucial part of the emerging nonlinear and quantum photonics platforms.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Room-temperature Mechanical Resonator with a Single Added or Subtracted Phonon
Authors:
Rishi N. Patel,
Timothy P. McKenna,
Zhaoyou Wang,
Jeremy D. Witmer,
Wentao Jiang,
Raphaël Van Laer,
Christopher J. Sarabalis,
Amir H. Safavi-Naeini
Abstract:
A room-temperature mechanical oscillator undergoes thermal Brownian motion with an amplitude much larger than the amplitude associated with a single phonon of excitation. This motion can be read out and manipulated using laser light using a cavity-optomechanical approach. By performing a strong quantum measurement, i.e., counting single photons in the sidebands imparted on a laser, we herald the a…
▽ More
A room-temperature mechanical oscillator undergoes thermal Brownian motion with an amplitude much larger than the amplitude associated with a single phonon of excitation. This motion can be read out and manipulated using laser light using a cavity-optomechanical approach. By performing a strong quantum measurement, i.e., counting single photons in the sidebands imparted on a laser, we herald the addition and subtraction of single phonons on the 300K thermal motional state of a 4GHz mechanical oscillator. To understand the resulting mechanical state, we implement a tomography scheme and observe highly non-Gaussian phase-space distributions. Using a maximum likelihood method, we infer the density matrix of the oscillator and confirm the counter-intuitive doubling of the mean phonon number resulting from phonon addition and subtraction.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Acousto-optic modulation of a wavelength-scale waveguide
Authors:
Christopher J. Sarabalis,
Raphaël Van Laer,
Rishi N. Patel,
Yanni D. Dahmani,
Wentao Jiang,
Felix M. Mayor,
Amir H. Safavi-Naeini
Abstract:
We demonstrate a collinear acousto-optic modulator in a suspended film of lithium niobate employing a high-confinement, wavelength-scale waveguide. By strongly confining the optical and mechanical waves, this modulator improves by orders of magnitude a figure-of-merit that accounts for both acousto-optic and electro-mechanical efficiency. Our device demonstration marks a significant technological…
▽ More
We demonstrate a collinear acousto-optic modulator in a suspended film of lithium niobate employing a high-confinement, wavelength-scale waveguide. By strongly confining the optical and mechanical waves, this modulator improves by orders of magnitude a figure-of-merit that accounts for both acousto-optic and electro-mechanical efficiency. Our device demonstration marks a significant technological advance in acousto-optics that promises a novel class of compact and low-power frequency shifters, tunable filters, non-magnetic isolators, and beam deflectors.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Loss channels affecting lithium niobate phononic crystal resonators at cryogenic temperature
Authors:
E. Alex Wollack,
Agnetta Y. Cleland,
Patricio Arrangoiz-Arriola,
Timothy P. McKenna,
Rachel G. Gruenke,
Rishi N. Patel,
Wentao Jiang,
Christopher J. Sarabalis,
Amir H. Safavi-Naeini
Abstract:
We investigate the performance of microwave-frequency phononic crystal resonators fabricated on thin-film lithium niobate for integration with superconducting quantum circuits. For different design geometries at millikelvin temperatures, we achieve mechanical internal quality factors $Q_i$ above $10^5 - 10^6$ at high microwave drive power, corresponding to $5\times10^6$ phonons inside the resonato…
▽ More
We investigate the performance of microwave-frequency phononic crystal resonators fabricated on thin-film lithium niobate for integration with superconducting quantum circuits. For different design geometries at millikelvin temperatures, we achieve mechanical internal quality factors $Q_i$ above $10^5 - 10^6$ at high microwave drive power, corresponding to $5\times10^6$ phonons inside the resonator. By swee** the defect size of resonators with identical mirror cell designs, we are able to indirectly observe signatures of the complete phononic bandgap via the resonators' internal quality factors. Examination of quality factors' temperature dependence shows how superconducting and two-level system (TLS) loss channels impact device performance. Finally, we observe an anomalous low-temperature frequency shift consistent with resonant TLS decay and find that material choice can help to mitigate these losses.
△ Less
Submitted 28 March, 2021; v1 submitted 2 October, 2020;
originally announced October 2020.
-
Gigahertz phononic integrated circuits on thin-film lithium niobate on sapphire
Authors:
Felix M. Mayor,
Wentao Jiang,
Christopher J. Sarabalis,
Timothy P. McKenna,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
Acoustic devices play an important role in classical information processing. The slower speed and lower losses of mechanical waves enable compact and efficient elements for delaying, filtering, and storing of electric signals at radio and microwave frequencies. Discovering ways of better controlling the propagation of phonons on a chip is an important step towards enabling larger scale phononic ci…
▽ More
Acoustic devices play an important role in classical information processing. The slower speed and lower losses of mechanical waves enable compact and efficient elements for delaying, filtering, and storing of electric signals at radio and microwave frequencies. Discovering ways of better controlling the propagation of phonons on a chip is an important step towards enabling larger scale phononic circuits and systems. We present a platform, inspired by decades of advances in integrated photonics, that utilizes the strong piezoelectric effect in a thin film of lithium niobate on sapphire to excite guided acoustic waves immune from leakage into the bulk due to the phononic analogue of index-guiding. We demonstrate an efficient transducer matched to 50 ohm and guiding within a 1-micron wide mechanical waveguide as key building blocks of this platform. Putting these components together, we realize acoustic delay lines, racetrack resonators, and meander line waveguides for sensing applications. To evaluate the promise of this platform for emerging quantum technologies, we characterize losses at low temperature and measure quality factors on the order of 50,000 at 4 kelvin. Finally, we demonstrate phononic four-wave mixing in these circuits and measure the nonlinear coefficients to provide estimates of the power needed for relevant parametric processes.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Acousto-optic modulation in lithium niobate on sapphire
Authors:
Christopher J. Sarabalis,
Timothy P. McKenna,
Rishi N. Patel,
Raphaël Van Laer,
Amir H. Safavi-Naeini
Abstract:
We demonstrate acousto-optic phase modulators in X-cut lithium niobate films on sapphire, detailing the dependence of the piezoelectric and optomechanical coupling coefficients on the crystal orientation. This new platform supports highly confined, strongly piezoelectric mechanical waves without suspensions, making it a promising candidate for broadband and efficient integrated acousto-optic devic…
▽ More
We demonstrate acousto-optic phase modulators in X-cut lithium niobate films on sapphire, detailing the dependence of the piezoelectric and optomechanical coupling coefficients on the crystal orientation. This new platform supports highly confined, strongly piezoelectric mechanical waves without suspensions, making it a promising candidate for broadband and efficient integrated acousto-optic devices, circuits, and systems.
△ Less
Submitted 2 May, 2020;
originally announced May 2020.
-
Nanobenders: efficient piezoelectric actuators for widely tunable nanophotonics at CMOS-level voltages
Authors:
Wentao Jiang,
Felix M. Mayor,
Rishi N. Patel,
Timothy P. McKenna,
Christopher J. Sarabalis,
Amir H. Safavi-Naeini
Abstract:
Tuning and reconfiguring nanophotonic components is needed to realize systems incorporating many components. The electrostatic force can deform a structure and tune its optical response. Despite the success of electrostatic actuators, they suffer from trade-offs between tuning voltage, tuning range, and on-chip area. Piezoelectric actuation could resolve all these challenges. Standard materials po…
▽ More
Tuning and reconfiguring nanophotonic components is needed to realize systems incorporating many components. The electrostatic force can deform a structure and tune its optical response. Despite the success of electrostatic actuators, they suffer from trade-offs between tuning voltage, tuning range, and on-chip area. Piezoelectric actuation could resolve all these challenges. Standard materials possess piezoelectric coefficients on the order of ${0.01}~\text{nm/V}$, suggesting extremely small on-chip actuation using potentials on the order of one volt. Here we propose and demonstrate compact piezoelectric actuators, called nanobenders, that transduce tens of nanometers per volt. By leveraging the non-uniform electric field from submicron electrodes, we generate bending of a piezoelectric nanobeam. Combined with a sliced photonic crystal cavity to sense displacement, we show tuning of an optical resonance by $\sim 5~\text{nm/V}~({0.6}~\text{THz/V})$ and between $1520$ and $1560~\text{nm}$ ($\sim 400$ linewidths) with only $ {4}~\text{V}$. Finally, we consider other tunable nanophotonic components enabled by nanobenders.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
-
Efficient bidirectional piezo-optomechanical transduction between microwave and optical frequency
Authors:
Wentao Jiang,
Christopher J. Sarabalis,
Yanni D. Dahmani,
Rishi N. Patel,
Felix M. Mayor,
Timothy P. McKenna,
Raphaël Van Laer,
Amir H. Safavi-Naeini
Abstract:
Efficient interconversion of both classical and quantum information between microwave and optical frequency is an important engineering challenge. The optomechanical approach with gigahertz-frequency mechanical devices has the potential to be extremely efficient due to the large optomechanical response of common materials, and the ability to localize mechanical energy into a micron-scale volume. H…
▽ More
Efficient interconversion of both classical and quantum information between microwave and optical frequency is an important engineering challenge. The optomechanical approach with gigahertz-frequency mechanical devices has the potential to be extremely efficient due to the large optomechanical response of common materials, and the ability to localize mechanical energy into a micron-scale volume. However, existing demonstrations suffer from some combination of low optical quality factor, low electrical-to-mechanical transduction efficiency, and low optomechanical interaction rate. Here we demonstrate an on-chip piezo-optomechanical transducer that systematically addresses all these challenges to achieve nearly three orders of magnitude improvement in conversion efficiency over previous work. Our modulator demonstrates acousto-optic modulation with $V_π = {0.02}$ V. We show bidirectional conversion efficiency of $10^{-5}$ with ${3.3}$ microwatts red-detuned optical pump, and $5.5\%$ with $323$ microwatts blue-detuned pump. Further study of quantum transduction at millikelvin temperatures is required to understand how the efficiency and added noise are affected by reduced mechanical dissipation, thermal conductivity, and thermal capacity.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
-
Piezoelectric transduction of a wavelength-scale mechanical waveguide
Authors:
Yanni D. Dahmani,
Christopher J. Sarabalis,
Wentao Jiang,
Felix M. Mayor,
Amir H. Safavi-Naeini
Abstract:
We present a piezoelectric transducer in thin-film lithium niobate that converts a 1.7 GHz microwave signal to a mechanical wave in a single mode of a 1 micron-wide waveguide. We measure a -12 dB conversion efficiency that is limited by material loss. The design method we employ is widely applicable to the transduction of wavelength-scale structures used in emerging phononic circuits like those at…
▽ More
We present a piezoelectric transducer in thin-film lithium niobate that converts a 1.7 GHz microwave signal to a mechanical wave in a single mode of a 1 micron-wide waveguide. We measure a -12 dB conversion efficiency that is limited by material loss. The design method we employ is widely applicable to the transduction of wavelength-scale structures used in emerging phononic circuits like those at the heart of many optomechanical microwave-to-optical quantum converters.
△ Less
Submitted 30 July, 2019;
originally announced July 2019.
-
The role of resonance and bandgaps in high $k_\textrm{eff}^2$ transducers
Authors:
Christopher J. Sarabalis,
Yanni D. Dahmani,
Agnetta Y. Cleland,
Amir H. Safavi-Naeini
Abstract:
Bandgaps formed in a piezoelectric transducer with large coupling, $k_\textrm{eff}^2$, qualitatively modify its electrical response. This regime in which electrical loading strongly couples forward and backward waves occurs in thin-film lithium niobate which has recently become available and amenable to nanopatterning. In this work, we study how resonance and bandgaps modify the design and perform…
▽ More
Bandgaps formed in a piezoelectric transducer with large coupling, $k_\textrm{eff}^2$, qualitatively modify its electrical response. This regime in which electrical loading strongly couples forward and backward waves occurs in thin-film lithium niobate which has recently become available and amenable to nanopatterning. In this work, we study how resonance and bandgaps modify the design and performance of transducers and delay lines in thin-film lithium niobate. These films are an attractive platform for GHz frequency applications in low-power RF analog signal processing, optomechanics, and quantum devices due to their high coupling, low loss, excellent optical properties, and compatibility with superconducting quantum circuits. We demonstrate aluminum IDTs in this platform for horizontal shear (SH) waves between $1.2$ and $3.3$ GHz and longitudinal waves between $2.1$ and $5.4$ GHz. For the SH waves, we measure a piezoelectric coupling coefficient of $13\%$ and $6.0$ dB/mm propagation losses in delay lines up to $1.2$ mm with a $300$ ns delay in air at room temperature. Reflections from electrical loading when $k_\textrm{eff}^2$ is large lead to a departure from the impulse response model widely used to model surface acoustic wave devices. Finite element method models and an experimental finger-pair sweep are used to characterize the role of resonance in these transducers, illuminating the physics behind the anomalously large motional admittances of these small-footprint IDTs.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Lithium Niobate Piezo-optomechanical Crystals
Authors:
Wentao Jiang,
Rishi N. Patel,
Felix M. Mayor,
Timothy P. McKenna,
Patricio Arrangoiz-Arriola,
Christopher J. Sarabalis,
Jeremy D. Witmer,
Raphaël Van Laer,
Amir H. Safavi-Naeini
Abstract:
Demonstrating a device that efficiently connects light, motion, and microwaves is an outstanding challenge in classical and quantum photonics. We make significant progress in this direction by demonstrating a photonic crystal resonator on thin-film lithium niobate (LN) that simultaneously supports high-$Q$ optical and mechanical modes, and where the mechanical modes are coupled piezoelectrically t…
▽ More
Demonstrating a device that efficiently connects light, motion, and microwaves is an outstanding challenge in classical and quantum photonics. We make significant progress in this direction by demonstrating a photonic crystal resonator on thin-film lithium niobate (LN) that simultaneously supports high-$Q$ optical and mechanical modes, and where the mechanical modes are coupled piezoelectrically to microwaves. For optomechanical coupling, we leverage the photoelastic effect in LN by optimizing the device parameters to realize coupling rates $g_0/2π\approx 120~\textrm{kHz}$. An optomechanical cooperativity $C>1$ is achieved leading to phonon lasing. Electrodes on the nanoresonator piezoelectrically drive mechanical waves on the beam that are then read out optically allowing direct observation of the phononic bandgap. Quantum coupling efficiency of $η\approx10^{-8}$ from the input microwave port to the localized mechanical resonance is measured. Improvements of the microwave circuit and electrode geometry can increase this efficiency and bring integrated ultra-low-power modulators and quantum microwave-to-optical converters closer to reality.
△ Less
Submitted 3 March, 2019;
originally announced March 2019.
-
A Time-of-Flight Imaging System Based on Resonant Photoelastic Modulation
Authors:
Okan Atalar,
Raphaël Van Laer,
Christopher J. Sarabalis,
Amir H. Safavi-Naeini,
Amin Arbabian
Abstract:
A time-of-flight (ToF) imaging system is proposed and its working principle demonstrated. To realize this system, a new device, a free-space optical mixer, is designed and fabricated. A scene is illuminated (flashed) with a megahertz level amplitude modulated light source and the reflected light from the scene is collected by a receiver. The receiver consists of the free-space optical mixer, compr…
▽ More
A time-of-flight (ToF) imaging system is proposed and its working principle demonstrated. To realize this system, a new device, a free-space optical mixer, is designed and fabricated. A scene is illuminated (flashed) with a megahertz level amplitude modulated light source and the reflected light from the scene is collected by a receiver. The receiver consists of the free-space optical mixer, comprising a photoelastic modulator sandwiched between polarizers, placed in front of a standard CMOS image sensor. This free-space optical mixer downconverts the megahertz level amplitude modulation frequencies into the temporal bandwidth of the image sensor. A full scale extension of the demonstrated system will be able to measure phases and Doppler shifts for the beat tones and use signal processing techniques to estimate the distance and velocity of each point in the illuminated scene with high accuracy.
△ Less
Submitted 12 November, 2018;
originally announced December 2018.
-
Diamond optomechanical crystals with embedded nitrogen-vacancy centers
Authors:
Jeffrey V Cady,
Ohad Michel,
Kenneth W Lee,
Rishi N Patel,
Christopher J Sarabalis,
Amir H Safavi-Naeni,
Ania C Bleszynski Jayich
Abstract:
Hybrid quantum devices, in which disparate quantum elements are combined in order to achieve enhanced functionality, have received much attention in recent years due to their exciting potential to address key problems in quantum information processing, communication, and control. Specifically, significant progress has been made in the field of hybrid mechanical devices, in which a qubit is coupled…
▽ More
Hybrid quantum devices, in which disparate quantum elements are combined in order to achieve enhanced functionality, have received much attention in recent years due to their exciting potential to address key problems in quantum information processing, communication, and control. Specifically, significant progress has been made in the field of hybrid mechanical devices, in which a qubit is coupled to a mechanical oscillator. Strong coupling in such devices has been demonstrated with superconducting qubits, and coupling defect qubits to mechanical elements via crystal strain has enabled novel methods of qubit measurement and control. In this paper we demonstrate the fabrication of diamond optomechanical crystals with embedded nitrogen-vacancy (NV) centers, a preliminary step toward reaching the quantum regime with defect qubit hybrid mechanical devices. We measure optical and mechanical resonances of diamond optomechanical crystals as well as the spin coherence of single embedded NV centers. We find that the spin has long coherence times $T_2^* = 1.5 μs$ and $T_2 = 72 μs$ despite its proximity to nanofabricated surfaces. Finally, we discuss potential improvements of these devices and prospects for future experiments in the quantum regime.
△ Less
Submitted 10 November, 2018;
originally announced November 2018.
-
A single-mode phononic wire
Authors:
Rishi N. Patel,
Zhaoyou Wang,
Wentao Jiang,
Christopher J. Sarabalis,
Jeff T. Hill,
Amir H. Safavi-Naeini
Abstract:
Photons and electrons transmit information to form complex systems and networks. Phonons on the other hand, the quanta of mechanical motion, are often considered only as carriers of thermal energy. Nonetheless, their flow can also be molded in fabricated nanoscale circuits. We design and experimentally demonstrate wires for phonons that transmit information with little loss or scattering across a…
▽ More
Photons and electrons transmit information to form complex systems and networks. Phonons on the other hand, the quanta of mechanical motion, are often considered only as carriers of thermal energy. Nonetheless, their flow can also be molded in fabricated nanoscale circuits. We design and experimentally demonstrate wires for phonons that transmit information with little loss or scattering across a chip. By patterning the surface of a silicon chip, we completely eliminate all but one channel of phonon conduction. We observe the emergence of low-loss standing waves in millimeter long phononic wires that we address and cool optically. Coherent transport and strong optical coupling to a phononic wire enables new phononic technologies to manipulate information and energy on a chip.
△ Less
Submitted 2 November, 2017;
originally announced November 2017.
-
Engineering phonon leakage in nanomechanical resonators
Authors:
Rishi N. Patel,
Christopher J. Sarabalis,
Wentao Jiang,
Jeff T. Hill,
Amir H. Safavi-Naeini
Abstract:
We propose and experimentally demonstrate a technique for coupling phonons out of an optomechanical crystal cavity. By designing a perturbation that breaks a symmetry in the elastic structure, we selectively induce phonon leakage without affecting the optical properties. It is shown experimentally via cryogenic measurements that the proposed cavity perturbation causes loss of phonons into mechanic…
▽ More
We propose and experimentally demonstrate a technique for coupling phonons out of an optomechanical crystal cavity. By designing a perturbation that breaks a symmetry in the elastic structure, we selectively induce phonon leakage without affecting the optical properties. It is shown experimentally via cryogenic measurements that the proposed cavity perturbation causes loss of phonons into mechanical waves on the surface of silicon, while leaving photon lifetimes unaffected. This demonstrates that phonon leakage can be engineered in on-chip optomechanical systems. We experimentally observe large fluctuations in leakage rates that we attribute to fabrication disorder and verify this using simulations. Our technique opens the way to engineering more complex on-chip phonon networks utilizing guided mechanical waves to connect quantum systems.
△ Less
Submitted 22 May, 2017;
originally announced May 2017.
-
High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate
Authors:
Jeremy D. Witmer,
Joseph A. Valery,
Patricio Arrangoiz-Arriola,
Christopher J. Sarabalis,
Jeff T. Hill,
Amir H. Safavi-Naeini
Abstract:
Future quantum networks in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the dev…
▽ More
Future quantum networks in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the device. We demonstrate high quality factor ring, disk and photonic crystal resonators using a hybrid silicon-on-lithium-niobate material system. Optical quality factors up to 730,000 are achieved, corresponding to propagation loss of 0.8 dB/cm. We also use the electro-optic effect to modulate the resonance frequency of a photonic crystal cavity, achieving a electro-optic modulation coefficient between 1 and 2 pm/V. In addition to quantum technology, we expect that our results will be useful both in traditional silicon photonics applications and in high-sensitivity acousto-optic devices.
△ Less
Submitted 7 December, 2016;
originally announced December 2016.
-
Release-free silicon-on-insulator cavity optomechanics
Authors:
Christopher J. Sarabalis,
Yanni D. Dahmani,
Rishi N. Patel,
Jeff T. Hill,
Amir H. Safavi-Naeini
Abstract:
We demonstrate optically coupled nanomechanical resonators fabricated on silicon-on-insulator. Silicon fin waveguides are used to control the dispersion of mechanical waves and engineer localized resonances by modulation of the fin properties. A photonic crystal cavity is designed to localize laser light near the fin and the mechanical motion is read out and modified by radiation pressure back-act…
▽ More
We demonstrate optically coupled nanomechanical resonators fabricated on silicon-on-insulator. Silicon fin waveguides are used to control the dispersion of mechanical waves and engineer localized resonances by modulation of the fin properties. A photonic crystal cavity is designed to localize laser light near the fin and the mechanical motion is read out and modified by radiation pressure back-action. We expect devices and systems made from similar structures to enable co-integration of signal transduction and processing capabilities via electronic, photonic, and phononic degrees freedom in a single scalable platform.
△ Less
Submitted 7 December, 2016;
originally announced December 2016.
-
Thermal Brillouin noise observed in silicon optomechanical waveguide
Authors:
Raphaël Van Laer,
Christopher J. Sarabalis,
Roel Baets,
Dries Van Thourhout,
Amir H. Safavi-Naeini
Abstract:
Stimulated Brillouin scattering was recently observed in nanoscale silicon waveguides. Surprisingly, thermally-driven photon-phonon conversion in these structures had not yet been reported. Here, we inject an optical probe in a suspended silicon waveguide and measure its phase fluctuations at the output. We observe mechanical resonances around 8 GHz with a scattering efficiency of…
▽ More
Stimulated Brillouin scattering was recently observed in nanoscale silicon waveguides. Surprisingly, thermally-driven photon-phonon conversion in these structures had not yet been reported. Here, we inject an optical probe in a suspended silicon waveguide and measure its phase fluctuations at the output. We observe mechanical resonances around 8 GHz with a scattering efficiency of $10^{-5} \, \text{m}^{-1}$ and a signal-to-noise ratio of 2. The observations are in agreement with a theory of noise in these waveguides as well as with stimulated measurements. Our scheme may simplify measurements of mechanical signatures in nanoscale waveguides and is a step towards a better grasp of thermal noise in these new continuum optomechanical systems.
△ Less
Submitted 4 November, 2016;
originally announced November 2016.
-
Guided acoustic and optical waves in silicon-on-insulator for Brillouin scattering and optomechanics
Authors:
Christopher J. Sarabalis,
Jeff T. Hill,
Amir H. Safavi-Naeini
Abstract:
We numerically study silicon waveguides on silica showing that it is possible to simultaneously guide optical and acoustic waves in the technologically important silicon on insulator (SOI) material system. Thin waveguides, or fins, exhibit geometrically softened mechanical modes at gigahertz frequencies with phase velocities below the Rayleigh velocity in glass, eliminating acoustic radiation loss…
▽ More
We numerically study silicon waveguides on silica showing that it is possible to simultaneously guide optical and acoustic waves in the technologically important silicon on insulator (SOI) material system. Thin waveguides, or fins, exhibit geometrically softened mechanical modes at gigahertz frequencies with phase velocities below the Rayleigh velocity in glass, eliminating acoustic radiation losses. We propose slot waveguides on glass with telecom optical frequencies and strong radiation pressure forces resulting in Brillouin gains on the order of 500 and 50,000 1/(Wm) for backward and forward Brillouin scattering, respectively.
△ Less
Submitted 16 April, 2016;
originally announced April 2016.
