-
The SPARC Toroidal Field Model Coil Program
Authors:
Zachary Hartwig,
Rui Vieira,
Darby Dunn,
Theodore Golfinopoulos,
Brian LaBombard,
Christopher Lammi,
Phil Michael,
Susan Agabian,
David Arsenault,
Raheem Barnett,
Mike Barry,
Larry Bartoszek,
William Beck,
David Bellofatto,
Daniel Brunner,
William Burke,
Jason Burrows,
William Byford,
Charles Cauley,
Sarah Chamberlain,
David Chavarria,
JL Cheng,
James Chicarello,
Karen Cote,
Corinne Cotta
, et al. (75 additional authors not shown)
Abstract:
The SPARC Toroidal Field Model Coil (TFMC) Program was a three-year effort between 2018 and 2021 that developed novel Rare Earth Yttrium Barium Copper Oxide (REBCO) superconductor technologies and then successfully utilized these technologies to design, build, and test a first-in-class, high-field (~20 T), representative-scale (~3 m) superconducting toroidal field coil. With the principal objectiv…
▽ More
The SPARC Toroidal Field Model Coil (TFMC) Program was a three-year effort between 2018 and 2021 that developed novel Rare Earth Yttrium Barium Copper Oxide (REBCO) superconductor technologies and then successfully utilized these technologies to design, build, and test a first-in-class, high-field (~20 T), representative-scale (~3 m) superconducting toroidal field coil. With the principal objective of demonstrating mature, large-scale, REBCO magnets, the project was executed jointly by the MIT Plasma Science and Fusion Center (PSFC) and Commonwealth Fusion Systems (CFS). The TFMC achieved its programmatic goal of experimentally demonstrating a large-scale high-field REBCO magnet, achieving 20.1 T peak field-on-conductor with 40.5 kA of terminal current, 815 kN/m of Lorentz loading on the REBCO stacks, and almost 1 GPa of mechanical stress accommodated by the structural case. Fifteen internal demountable pancake-to-pancake joints operated in the 0.5 to 2.0 nOhm range at 20 K and in magnetic fields up to 12 T. The DC and AC electromagnetic performance of the magnet, predicted by new advances in high-fidelity computational models, was confirmed in two test campaigns while the massively parallel, single-pass, pressure-vessel style coolant scheme capable of large heat removal was validated. The REBCO current lead and feeder system was experimentally qualified up to 50 kA, and the crycooler based cryogenic system provided 600 W of cooling power at 20 K with mass flow rates up to 70 g/s at a maximum design pressure of 20 bar-a for the test campaigns. Finally, the feasibility of using passive, self-protection against a quench in a fusion-scale NI TF coil was experimentally assessed with an intentional open-circuit quench at 31.5 kA terminal current.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
A strategy to identify breakdown location in MITICA test facility: results of high voltage test campaign
Authors:
Loris Zanotto,
Marco Boldrin,
Giuseppe Chitarin,
Mattia Dan,
Tommaso Patton,
Francesco Santoro,
Vanni Toigo,
Hiroyuki Tobari,
Atsushi Kojima,
Hans Decamps
Abstract:
The Acceleration Grid Power Supply of the MITICA test facility in Padova (Italy) is currently under commissioning. The power conversion system, the DC generator, and the High Voltage equipment have been individually commissioned, whereas the integration tests are ongoing. It is a challenging process due to the unconventional application, to the variety of different electrical technologies involved…
▽ More
The Acceleration Grid Power Supply of the MITICA test facility in Padova (Italy) is currently under commissioning. The power conversion system, the DC generator, and the High Voltage equipment have been individually commissioned, whereas the integration tests are ongoing. It is a challenging process due to the unconventional application, to the variety of different electrical technologies involved and to the complexity of the interfaces. During the integrated tests of the power supplies the achievement of 700kV stable operation has been demonstrated for the first time in a Neutral Beam Injector, but an unexpected event occurred, most likely a breakdown in the HV part, which resulted in a fault of the DC generator. A subsequent test using an auxiliary power supply was performed to check the voltage withstanding capability of the HV plant, but another breakdown occurred at around 1MV. This paper describes the activity performed to identify the location of the breakdowns affecting the integrated tests. A test campaign has been devised with increased diagnostic capabilities and specific strategy conceived to trigger intentional breakdowns in specific locations and collect measurement patterns for different cases. The results of the campaign will be presented and the current understanding of the issue will be described, with a view on future tests and further improvements of diagnostics.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Overview on electrical issues faced during the SPIDER experimental campaigns
Authors:
Alberto Maistrello,
Matteo Agostini,
Marco Bigi,
Matteo Brombin,
Mattia Dan,
Riccardo Casagrande,
Marco De Nardi,
Alberto Ferro,
Elena Gaio,
Palak Jain,
Francesco Lunardon,
Nicolò Marconato,
Diego Marcuzzi,
Mauro Recchia,
Tommaso Patton,
Mauro Pavei,
Francesco Santoro,
Vanni Toigo,
Loris Zanotto,
Marco Barbisan,
Lucio Baseggio,
Marco Bernardi,
Giovanni Berton,
Marco Boldrin,
Samuele Dal Bello
, et al. (17 additional authors not shown)
Abstract:
SPIDER is the full-scale prototype of the ion source of the ITER Heating Neutral Beam Injector, where negative ions of Hydrogen or Deuterium are produced by a RF generated plasma and accelerated with a set of grids up to ~100 keV. The Power Supply System is composed of high voltage dc power supplies capable of handling frequent grid breakdowns, high current dc generators for the magnetic filter fi…
▽ More
SPIDER is the full-scale prototype of the ion source of the ITER Heating Neutral Beam Injector, where negative ions of Hydrogen or Deuterium are produced by a RF generated plasma and accelerated with a set of grids up to ~100 keV. The Power Supply System is composed of high voltage dc power supplies capable of handling frequent grid breakdowns, high current dc generators for the magnetic filter field and RF generators for the plasma generation. During the first 3 years of SPIDER operation different electrical issues were discovered, understood and addressed thanks to deep analyses of the experimental results supported by modelling activities. The paper gives an overview on the observed phenomena and relevant analyses to understand them, on the effectiveness of the short-term modifications provided to SPIDER to face the encountered issues and on the design principle of long-term solutions to be introduced during the currently ongoing long shutdown.
△ Less
Submitted 5 April, 2023;
originally announced April 2023.
-
Lessons learned after three years of SPIDER operation and the first MITICA integrated tests
Authors:
D. Marcuzzi,
V. Toigo,
M. Boldrin,
G. Chitarin,
S. Dal Bello,
L. Grando,
A. Luchetta,
R. Pasqualotto,
M. Pavei,
G. Serianni,
L. Zanotto,
R. Agnello,
P. Agostinetti,
M. Agostini,
D. Aprile,
M. Barbisan,
M. Battistella,
G. Berton,
M. Bigi,
M. Brombin,
V. Candela,
V. Candeloro,
A. Canton,
R. Casagrande,
C. Cavallini
, et al. (117 additional authors not shown)
Abstract:
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedi…
▽ More
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedicated to develo** and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign. Parallelly, developments on MITICA, the full-scale prototype of the ITER NBI featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of in-vessel components, while power supplies and auxiliary plants are already under final testing and commissioning. Integration, commissioning and tests of the 1MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. The integrated test to confirm 1MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, solutions for the repair and the improvement of the system were developed. Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Towards quantum 3D imaging devices: the Qu3D project
Authors:
Cristoforo Abbattista,
Leonardo Amoruso,
Samuel Burri,
Edoardo Charbon,
Francesco Di Lena,
Augusto Garuccio,
Davide Giannella,
Zdenek Hradil,
Michele Iacobellis,
Gianlorenzo Massaro,
Paul Mos,
Libor Motka,
Martin Paur,
Francesco V. Pepe,
Michal Peterek,
Isabella Petrelli,
Jaroslav Rehacek,
Francesca Santoro,
Francesco Scattarella,
Arin Ulku,
Sergii Vasiukov,
Michael Wayne,
Milena D'Angelo,
Claudio Bruschini,
Maria Ieronymaki
, et al. (1 additional authors not shown)
Abstract:
We review the advancement of the research toward the design and implementation of quantum plenoptic cameras, radically novel 3D imaging devices that exploit both momentum-position entanglement and photon-number correlations to provide the typical refocusing and ultra-fast, scanning-free, 3D imaging capability of plenoptic devices, along with dramatically enhanced performances, unattainable in stan…
▽ More
We review the advancement of the research toward the design and implementation of quantum plenoptic cameras, radically novel 3D imaging devices that exploit both momentum-position entanglement and photon-number correlations to provide the typical refocusing and ultra-fast, scanning-free, 3D imaging capability of plenoptic devices, along with dramatically enhanced performances, unattainable in standard plenoptic cameras: diffraction-limited resolution, large depth of focus, and ultra-low noise. To further increase the volumetric resolution beyond the Rayleigh diffraction limit, and achieve the quantum limit, we are also develo** dedicated protocols based on quantum Fisher information. However, for the quantum advantages of the proposed devices to be effective and appealing to end-users, two main challenges need to be tackled. First, due to the large number of frames required for correlation measurements to provide an acceptable SNR, quantum plenoptic imaging would require, if implemented with commercially available high-resolution cameras, acquisition times ranging from tens of seconds to a few minutes. Second, the elaboration of this large amount of data, in order to retrieve 3D images or refocusing 2D images, requires high-performance and time-consuming computation. To address these challenges, we are develo** high-resolution SPAD arrays and high-performance low-level programming of ultra-fast electronics, combined with compressive sensing and quantum tomography algorithms, with the aim to reduce both the acquisition and the elaboration time by two orders of magnitude. Routes toward exploitation of the QPI devices will also be discussed.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
Cell membrane disruption by vertical nanopillars: the role of membrane bending and traction forces
Authors:
Rosario Capozza,
Valeria Caprettini,
Carlo A. Gonano,
Alessandro Bosca,
Fabio Moia,
Francesca Santoro,
Francesco De Angelis
Abstract:
Gaining access to the cell interior is fundamental for many applications, such as electrical recording, drug and biomolecular delivery. A very promising technique consists of culturing cells on nano/micro pillars. The tight adhesion and high local deformation of cells in contact with nanostructures can promote the permeabilization of lipids at the plasma membrane, providing access to the internal…
▽ More
Gaining access to the cell interior is fundamental for many applications, such as electrical recording, drug and biomolecular delivery. A very promising technique consists of culturing cells on nano/micro pillars. The tight adhesion and high local deformation of cells in contact with nanostructures can promote the permeabilization of lipids at the plasma membrane, providing access to the internal compartment. However, there is still much experimental controversy regarding when and how the intracellular environment is targeted and the role of the geometry and interactions with surfaces. Consequently, we investigated, by coarse-grained molecular dynamics simulations of the cell membrane, the mechanical properties of the lipid bilayer under high strain and bending conditions. We found out that a high curvature of the lipid bilayer dramatically lowers the traction force necessary to achieve membrane rupture. Afterwards, we experimentally studied the permeabilization rate of cell membrane by pillars with comparable aspect ratios but different sharpness values at the edges. The experimental data support the simulation results: even pillars with diameters in the micron range may cause local membrane disruption when their edges are sufficiently sharp. Therefore, the permeabilization likelihood is connected to the local geometric features of the pillars rather than diameter or aspect ratio. The present study can also provide significant contributions to the design of 3D biointerfaces for tissue engineering and cellular growth.
△ Less
Submitted 27 April, 2018;
originally announced April 2018.
-
Vibrationally resolved electronic spectra including vibrational pre-excitation: Theory and application to VIPER spectroscopy
Authors:
Jan von Cosel,
Javier Cerezo,
Daniela Kern-Michler,
Carsten Neumann,
Luuk J. G. W. van Wilderen,
Jens Bredenbeck,
Fabrizio Santoro,
Irene Burghardt
Abstract:
Vibrationally resolved electronic absorption spectra including the effect of vibrational pre-excitation are computed in order to interpret and predict vibronic transitions that are probed in the Vibrationally Promoted Electronic Resonance (VIPER) experiment [L. J. G. W. van Wilderen et al., Angew. Chem. Int. Ed. 53, 2667 (2014)]. To this end, we employ time-independent and time-dependent methods b…
▽ More
Vibrationally resolved electronic absorption spectra including the effect of vibrational pre-excitation are computed in order to interpret and predict vibronic transitions that are probed in the Vibrationally Promoted Electronic Resonance (VIPER) experiment [L. J. G. W. van Wilderen et al., Angew. Chem. Int. Ed. 53, 2667 (2014)]. To this end, we employ time-independent and time-dependent methods based on the evaluation of Franck-Condon overlap integrals and Fourier transformation of time-domain wavepacket autocorrelation functions, respectively. The time-independent approach uses a generalized version of the FCclasses method [F. Santoro et al., J. Chem. Phys. 126, 084509 (2007)]. In the time-dependent approach, autocorrelation functions are obtained by wavepacket propagation and by evaluation of analytic expressions, within the harmonic approximation including Duschinsky rotation effects. For several medium-sized polyatomic systems, it is shown that selective pre-excitation of particular vibrational modes leads to a red-shift of the low-frequency edge of the electronic absorption spectrum, which is a prerequisite for the VIPER experiment. This effect is typically most pronounced upon excitation of ring distortion modes within an aromatic pi-system. Theoretical predictions as to which modes show the strongest VIPER effect are found to be in excellent agreement with experiment.
△ Less
Submitted 22 August, 2017; v1 submitted 11 July, 2017;
originally announced July 2017.
