-
Quantum optical coherence: From linear to nonlinear interferometers
Authors:
K. -H. Luo,
M. Santandrea,
M. Stefszky,
J. Sperling,
M. Massaro,
A. Ferreri,
P. R. Sharapova,
H. Herrmann,
C. Silberhorn
Abstract:
Interferometers provide a highly sensitive means to investigate and exploit the coherence properties of light in metrology applications. However, interferometers come in various forms and exploit different properties of the optical states within. In this paper, we introduce a classification scheme that characterizes any interferometer based on the number of involved nonlinear elements by studying…
▽ More
Interferometers provide a highly sensitive means to investigate and exploit the coherence properties of light in metrology applications. However, interferometers come in various forms and exploit different properties of the optical states within. In this paper, we introduce a classification scheme that characterizes any interferometer based on the number of involved nonlinear elements by studying their influence on single-photon and photon-pair states. Several examples of specific interferometers from these more general classes are discussed, and the theory describing the expected first-order and second-order coherence measurements for single-photon and single-photon-pair input states is summarized and compared. These theoretical predictions are then tested in an innovative experimental setup that is easily able to switch between implementing an interferometer consisting of only one or two nonlinear elements. The resulting singles and coincidence rates are measured in both configurations and the results are seen to fit well with the presented theory. The measured results of coherence are tied back to the presented classification scheme, revealing that our experimental design can be useful in gaining insight into the properties of the various interferometeric setups containing different degrees of nonlinearity.
△ Less
Submitted 22 October, 2021; v1 submitted 6 April, 2021;
originally announced April 2021.
-
Improved non-linear devices for quantum applications
Authors:
Jano Gil-Lopez,
Matteo Santandrea,
Benjamin Brecht,
Ganaël Roland,
Raimund Ricken,
Viktor Quiring,
Christine Silberhorn
Abstract:
In this paper, we review the state of the art of mode selective, integrated sum-frequency generation devices tailored for quantum optical technologies. We explore benchmarks to asses their performance and discuss the current limitations of these devices, outlining possible strategies to overcome them. Finally, we present the fabrication of a new, improved device and its characterization. We analys…
▽ More
In this paper, we review the state of the art of mode selective, integrated sum-frequency generation devices tailored for quantum optical technologies. We explore benchmarks to asses their performance and discuss the current limitations of these devices, outlining possible strategies to overcome them. Finally, we present the fabrication of a new, improved device and its characterization. We analyse the fabrication quality of this device and discuss the next steps towards improved non-linear devices for quantum applications.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Spectrally multimode integrated SU(1,1) interferometer
Authors:
Alessandro Ferreri,
Matteo Santandrea,
Michael Stefszky,
Kai H. Luo,
Harald Herrmann,
Christine Silberhorn,
Polina R. Sharapova
Abstract:
Nonlinear SU(1,1) interferometers are fruitful and promising tools for spectral engineering and precise measurements with phase sensitivity below the classical bound. Such interferometers have been successfully realized in bulk and fiber-based configurations. However, rapidly develo** integrated technologies provide higher efficiencies, smaller footprints, and pave the way to quantum-enhanced on…
▽ More
Nonlinear SU(1,1) interferometers are fruitful and promising tools for spectral engineering and precise measurements with phase sensitivity below the classical bound. Such interferometers have been successfully realized in bulk and fiber-based configurations. However, rapidly develo** integrated technologies provide higher efficiencies, smaller footprints, and pave the way to quantum-enhanced on-chip interferometry. In this work, we theoretically realised an integrated architecture of the multimode SU(1,1) interferometer which can be applied to various integrated platforms. The presented interferometer includes a polarization converter between two photon sources and utilizes a continuous-wave (CW) pump. Based on the potassium titanyl phosphate (KTP) platform, we show that this configuration results in almost perfect destructive interference at the output and supersensitivity regions below the classical limit. In addition, we discuss the fundamental difference between single-mode and highly multimode SU(1,1) interferometers in the properties of phase sensitivity and its limits. Finally, we explore how to improve the phase sensitivity by filtering the output radiation and using different seeding states in different modes with various detection strategies.
△ Less
Submitted 26 May, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Waveguide Resonator with Integrated Phase Modulator for Second Harmonic Generation
Authors:
Michael Stefszky,
Matteo Santandrea,
Felix vom Bruch,
Stephan Krapick,
Christof Eigner,
Raimund Ricken,
Viktor Quiring,
Harald Herrmann,
and Christine Silberhorn
Abstract:
We report second harmonic generation from a titanium indiffused lithium niobate waveguide resonator device whose cavity length is locked to the fundamental pump laser using an on-chip phase modulator. The device remains locked for more than 5 minutes, producing more than 80\% of the initial second harmonic power. The stability of the system is seen to be limited by DC-drift, a known effect in many…
▽ More
We report second harmonic generation from a titanium indiffused lithium niobate waveguide resonator device whose cavity length is locked to the fundamental pump laser using an on-chip phase modulator. The device remains locked for more than 5 minutes, producing more than 80\% of the initial second harmonic power. The stability of the system is seen to be limited by DC-drift, a known effect in many lithium niobate systems that include deposited electrodes. The presented device explores the suitability of waveguide resonators in this platform for use in larger integrated networks.
△ Less
Submitted 15 October, 2020;
originally announced October 2020.
-
General analytic theory of classical collinear three wave mixing in a monolithic cavity
Authors:
Matteo Santandrea,
Michael Stefszky,
Christine Silberhorn
Abstract:
Integrated, monolithic nonlinear cavities are of high interest in both classical and quantum optics experiments for their high efficiency and stability. However, a general, analytic theory of classical three wave mixing in such systems that encompasses multiple monolithic designs, including both linear and nonlinear regions, as well as any three-wave mixing process has not yet been fully developed…
▽ More
Integrated, monolithic nonlinear cavities are of high interest in both classical and quantum optics experiments for their high efficiency and stability. However, a general, analytic theory of classical three wave mixing in such systems that encompasses multiple monolithic designs, including both linear and nonlinear regions, as well as any three-wave mixing process has not yet been fully developed.
In this paper, we present the analytic theory for a general, classical three wave mixing process in a cavity with arbitrary finesse and non-zero propagation losses, encompassing second harmonic, sum frequency and difference frequency generation - SHG, SFG and DFG respectively. The analytic expression is derived under the sole assumption of low single-pass conversion efficiency (or equivalently operating in the non-depleted pump regime).
We demonstrate remarkable agreement between the presented model and the experimentally obtained highly complex second-harmonic spectrum of a titanium-diffused lithium niobate waveguide cavity that includes both a linear and nonlinear section. We then show the effect that reversing the linear and nonlinear regions has on the output spectrum, highlighting the importance of system design. Finally, we demonstrate that the model can be extended to include the effect of phase modulation applied to the cavity.
△ Less
Submitted 13 October, 2020;
originally announced October 2020.
-
Evidence of nonlinear diffusion in KTP waveguides
Authors:
Laura Padberg,
Matteo Santandrea,
Michael Rüsing,
Julian Brockmeier,
Peter Mackwitz,
Gerhard Berth,
Artur Zrenner,
Christof Eigner,
Christine Silberhorn
Abstract:
Integrated $χ^{(2)}$ devices are a widespread tool for the generation and manipulation of light fields, since they exhibit high efficiency, small footprint and the ability to interface them with fibre networks. Surprisingly many things are not fully understood until now, in particular the fabrication of structures in potassium titanyl phosphate (KTP). A thorough understanding of the fabrication pr…
▽ More
Integrated $χ^{(2)}$ devices are a widespread tool for the generation and manipulation of light fields, since they exhibit high efficiency, small footprint and the ability to interface them with fibre networks. Surprisingly many things are not fully understood until now, in particular the fabrication of structures in potassium titanyl phosphate (KTP). A thorough understanding of the fabrication process and analysis of spatial properties is crucial for the realization and the engineering of high efficiency devices for quantum applications. In this paper we present our studies on rubidium-exchanged waveguides fabricated in KTP. Employing energy dispersive X-ray spectroscopy (EDX), we analysed a set of waveguides fabricated with different production parameters in terms of time and temperature. We find that the waveguide depth is dependent on their widths by reconstructing the waveguide depth profiles. Narrower waveguides are deeper, contrary to the theoretical model usually employed. Moreover, we found that the variation of the penetration depth with the waveguide width is stronger at higher temperatures and times. We attribute this behaviour to stress-induced variation in the diffusion process.
△ Less
Submitted 19 May, 2020;
originally announced June 2020.
-
Cryogenic second harmonic generation in periodically-poled lithium niobate waveguides
Authors:
Moritz Bartnick,
Matteo Santandrea,
Jan Philipp Hoepker,
Frederik Thiele,
Raimund Ricken,
Viktor Quiring,
Christof Eigner,
Harald Herrmann,
Christine Silberhorn,
Tim J. Bartley
Abstract:
Prospective integrated quantum optical technologies will combine nonlinear optics and components requiring cryogenic operating temperatures. Despite the prevalence of integrated platforms exploiting $χ^{(2)}$-nonlinearities for quantum optics, for example used for quantum state generation and frequency conversion, their material properties at low temperatures are largely unstudied. Here, we demons…
▽ More
Prospective integrated quantum optical technologies will combine nonlinear optics and components requiring cryogenic operating temperatures. Despite the prevalence of integrated platforms exploiting $χ^{(2)}$-nonlinearities for quantum optics, for example used for quantum state generation and frequency conversion, their material properties at low temperatures are largely unstudied. Here, we demonstrate the first second harmonic generation in a fiber-coupled lithium niobate waveguide at temperatures down to 4.4K. We observe a reproducible shift in the phase-matched pump wavelength within the telecom band, in addition to transient discontinuities while temperature cycling. Our results establish lithium niobate as a versatile nonlinear photonic integration platform compatible with cryogenic quantum technologies.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
An interferometric method for determining the losses of spatially multi-mode nonlinear waveguides based on second harmonic generation
Authors:
Matteo Santandrea,
Michael Stefszky,
Ganaël Roeland,
Christine Silberhorn
Abstract:
The characterisation of loss in optical waveguides is essential in understanding the performance of these devices and their limitations. Whilst interferometric-based methods generally provide the best results for low-loss waveguides, they are almost exclusively used to provide characterization in cases where the waveguide is spatially single-mode. Here, we introduce a Fabry-Pérot-based scheme to e…
▽ More
The characterisation of loss in optical waveguides is essential in understanding the performance of these devices and their limitations. Whilst interferometric-based methods generally provide the best results for low-loss waveguides, they are almost exclusively used to provide characterization in cases where the waveguide is spatially single-mode. Here, we introduce a Fabry-Pérot-based scheme to estimate the losses of a nonlinear (birefringent or quasi-phase matched) waveguide at a wavelength where it is multi-mode. The method involves measuring the generated second harmonic power as the pump wavelength is scanned over the phasematching region. Furthermore, it is shown that this method allows one to infer the losses of different second harmonic spatial modes by scanning the pump field over the separated phase matching spectra. By fitting the measured phasematching spectra from a titanium indiffused lithium niobate waveguide sample to the model presented in this paper, it is shown that one can estimate the second harmonic losses of a single spatial-mode, at wavelengths where the waveguides are spatially multi-mode.
△ Less
Submitted 17 October, 2019; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Characterisation of Inhomogeneities in Ti:LiNbO$_3$ waveguides
Authors:
Matteo Santandrea,
Michael Stefszky,
Ganaël Roeland,
Christine Silberhorn
Abstract:
Nonlinear processes in integrated, guiding systems are fundamental for both classical and quantum experiments. Integrated components allow for compact, modular and stable light-processing systems and as such their use in real-world systems continues to expand. In order to use these devices in the most demanding applications, where efficiency and/or spectral performance are critical, it is importan…
▽ More
Nonlinear processes in integrated, guiding systems are fundamental for both classical and quantum experiments. Integrated components allow for compact, modular and stable light-processing systems and as such their use in real-world systems continues to expand. In order to use these devices in the most demanding applications, where efficiency and/or spectral performance are critical, it is important that the devices are fully optimized. In order to achieve these optimizations, it is first necessary to gain a thorough understanding of current fabrication limits and their impact on the devices final performance. In this paper we investigate the current fabrication limits of titanium in-diffused lithium niobate waveguides produced using a masked photolithographic method. By dicing a long (~cm) sample into smaller pieces and recording the resulting phasematching spectra, the fabrication error present in the UV photolithographic process is characterized. The retrieved imperfections fit well with theoretical expectations and from the measured imperfection profile it is shown that one can directly reconstruct the original distorted phasematching spectrum. Therefore, our measurements directly quantify the intrinsic limitations of the current standard UV photolitographic technique for the realization of integrated waveguides in lithium niobate.
△ Less
Submitted 24 June, 2019;
originally announced June 2019.
-
General framework for the analysis of imperfections in nonlinear systems
Authors:
Matteo Santandrea,
Michael Stefszky,
Christine Silberhorn
Abstract:
In this paper, we derive a framework to understand the effect of imperfections on the phasematching spectrum of a wide class of nonlinear systems. We show that this framework is applicable to many physical systems, such as waveguides or fibres. Furthermore, this treatment reveals that the product of the system length and the magnitude of the imperfections completely determines the phasematching pr…
▽ More
In this paper, we derive a framework to understand the effect of imperfections on the phasematching spectrum of a wide class of nonlinear systems. We show that this framework is applicable to many physical systems, such as waveguides or fibres. Furthermore, this treatment reveals that the product of the system length and the magnitude of the imperfections completely determines the phasematching properties of these systems, thus offering a general rule for system design. Additionally, our framework provides a simple method to compare the performance of a wide range of nonlinear systems.
△ Less
Submitted 24 June, 2019;
originally announced June 2019.
-
Fabrication limits of waveguides in nonlinear crystals and their impact on quantum optics applications
Authors:
Matteo Santandrea,
Michael Stefszky,
Vahid Ansari,
Christine Silberhorn
Abstract:
Waveguides in nonlinear materials are a key component for photon pair sources and offer promising solutions to interface quantum memories through frequency conversion. To bring these technologies closer to every-day life, it is still necessary to guarantee a reliable and efficient fabrication of these devices. Therefore, a thorough understanding of the technological limitations of nonlinear wavegu…
▽ More
Waveguides in nonlinear materials are a key component for photon pair sources and offer promising solutions to interface quantum memories through frequency conversion. To bring these technologies closer to every-day life, it is still necessary to guarantee a reliable and efficient fabrication of these devices. Therefore, a thorough understanding of the technological limitations of nonlinear waveguiding devices is paramount. In this paper, we study the link between fabrication errors of waveguides in nonlinear crystals and the final performance of such devices. In particular, we first derive a mathematical expression to qualitatively assess the technological limitations of any nonlinear waveguide. We apply this tool to study the impact of fabrication imperfections on the phasematching properties of different quantum processes realized in titanium-diffused lithium niobate waveguides. Finally, we analyse the effect of waveguide imperfections on quantum state generation and manipulation for few selected cases. We find that the main source of phasematching degradation is the correlated variation of the waveguide's dispersion properties and suggest different possible strategies to reduce the impact of fabrication imperfections.
△ Less
Submitted 24 October, 2018; v1 submitted 24 September, 2018;
originally announced September 2018.
-
Towards integrated superconducting detectors on lithium niobate waveguides
Authors:
Jan Philipp Höpker,
Moritz Bartnick,
Evan Meyer-Scott,
Frederik Thiele,
Stephan Krapick,
Nicola Montaut,
Matteo Santandrea,
Harald Herrmann,
Sebastian Lengeling,
Raimund Ricken,
Viktor Quiring,
Torsten Meier,
Adriana Lita,
Varun Verma,
Thomas Gerrits,
Sae Woo Nam,
Christine Silberhorn,
Tim J. Bartley
Abstract:
Superconducting detectors are now well-established tools for low-light optics, and in particular quantum optics, boasting high-efficiency, fast response and low noise. Similarly, lithium niobate is an important platform for integrated optics given its high second-order nonlinearity, used for high-speed electro-optic modulation and polarization conversion, as well as frequency conversion and source…
▽ More
Superconducting detectors are now well-established tools for low-light optics, and in particular quantum optics, boasting high-efficiency, fast response and low noise. Similarly, lithium niobate is an important platform for integrated optics given its high second-order nonlinearity, used for high-speed electro-optic modulation and polarization conversion, as well as frequency conversion and sources of quantum light. Combining these technologies addresses the requirements for a single platform capable of generating, manipulating and measuring quantum light in many degrees of freedom, in a compact and potentially scalable manner. We will report on progress integrating tungsten transition-edge sensors (TESs) and amorphous tungsten silicide superconducting nanowire single-photon detectors (SNSPDs) on titanium in-diffused lithium niobate waveguides. The travelling-wave design couples the evanescent field from the waveguides into the superconducting absorber. We will report on simulations and measurements of the absorption, which we can characterize at room temperature prior to cooling down the devices. Independently, we show how the detectors respond to flood illumination, normally incident on the devices, demonstrating their functionality.
△ Less
Submitted 18 August, 2017;
originally announced August 2017.
