-
Optimal Demodulation Domain for Microwave SQUID Multiplexers in Presence of Readout System Noise
Authors:
M. E. García Redondo,
N. A. Müller,
J. M. Salum,
L. P. Ferreyro,
J. D. Bonilla-Neira,
J. M. Geria,
J. J. Bonaparte,
T. Muscheid,
R. Gartmann,
A. Almela,
M. R. Hampel,
A. E. Fuster,
L. E. Ardila-Perez,
M. Wegner,
M. Platino,
O. Sander,
S. Kempf,
M. Weber
Abstract:
The Microwave SQUID Multiplexer (μMUX) is the device of choice for the readout of a large number of Low-Temperature Detectors in a wide variety of experiments within the fields of astronomy and particle physics. While it offers large multiplexing factors, the system noise performance is highly dependent on the cold and warm-readout electronic systems used to read it out, as well as the demodulatio…
▽ More
The Microwave SQUID Multiplexer (μMUX) is the device of choice for the readout of a large number of Low-Temperature Detectors in a wide variety of experiments within the fields of astronomy and particle physics. While it offers large multiplexing factors, the system noise performance is highly dependent on the cold and warm-readout electronic systems used to read it out, as well as the demodulation domain and parameters chosen. In order to understand the impact of the readout systems in the overall noise performance, first we extended the available μMUX simulation frameworks including additive and multiplicative noise sources in the probing tones (i.e. phase and amplitude noise), along with the capability of demodulating the scientific data, either in resonator's phase or amplitude. Then, considering the additive noise as a dominant noise source, the optimum readout parameters to achieve minimum system noise were found for both open-loop and flux-ramp demodulation schemes in the aforementioned domains. Later, we evaluated the system noise sensitivity to multiplicative noise sources under the optimum readout parameters. Finally, as a case study, we evaluated the optimal demodulation domain and expected system noise level for a typical Software-Defined Radio (SDR) readout system. This work leads to an improved system performance prediction and noise engineering based on the available readout electronics and selected demodulation domain.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
ZynqMP-based board-management mezzanines for Serenity ATCA-blades
Authors:
T. Mehner,
L. E. Ardila-Perez,
M. N. Balzer,
O. Sander,
D. Tcherniakhovski,
M. Schleicher,
M. Fuchs,
G. Fedi,
G. Gimas,
G. M. Iles,
M. Pesaresi,
A. W. Rose,
T. Schuh
Abstract:
In the context of the CMS Phase-2 tracker back-end processing system, two mezzanines based on the Zynq Ultrascale+ Multi-Processor System-on-Chip (MPSoC) device have been developed to serve as centralized slow control and board management solution for the Serenity-family \textcolor{black}{Advanced Telecommunications Computing Architecture (ATCA)} blades.
This paper presents the developments of t…
▽ More
In the context of the CMS Phase-2 tracker back-end processing system, two mezzanines based on the Zynq Ultrascale+ Multi-Processor System-on-Chip (MPSoC) device have been developed to serve as centralized slow control and board management solution for the Serenity-family \textcolor{black}{Advanced Telecommunications Computing Architecture (ATCA)} blades.
This paper presents the developments of the MPSoC mezzanines to execute the Intelligent Platform Management Controller (IPMC) software in the real-time capable processors of the MPSoC. In coordination with the Shelf Manager, once full-power is enabled, a CentOS-based Linux distribution is executed in the application processors of the MPSoC, on which EMPButler and the Serenity Management Shell (SMASH) are running.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Full-Scale Readout Electronics for the ECHo-100k Experiment
Authors:
T. Muscheid,
R. Gartmann,
N. Karcher,
F. Schuderer,
M. Neidig,
L. E. Ardila-Perez,
M. Balzer,
S. Kempf,
O. Sander
Abstract:
Recent advances in the development of cryogenic particle detectors such as magnetic microcalorimeters (MMCs) allow the fabrication of sensor arrays with an increasing number of pixels. Since these detectors must be operated at the lowest temperatures, the readout of large detector arrays is still quite challenging. This is especially true for the ECHo experiment, which presently aims to simultaneo…
▽ More
Recent advances in the development of cryogenic particle detectors such as magnetic microcalorimeters (MMCs) allow the fabrication of sensor arrays with an increasing number of pixels. Since these detectors must be operated at the lowest temperatures, the readout of large detector arrays is still quite challenging. This is especially true for the ECHo experiment, which presently aims to simultaneously run 6,000 two-pixel detectors to investigate the electron neutrino mass. For this reason, we developed a readout system based on a microwave SQUID multiplexer ($μ$MUX) that is operated by a custom software-defined radio (SDR) at room-temperature. The SDR readout electronics consist of three distinct hardware units: a data processing board with a Xilinx ZynqUS+ MPSoC; a converter board that features DACs, ADCs, and a coherent clock distribution network; and a radio frequency front-end board to translate the signals between the baseband and the microwave domains. Here, we describe the characteristics of the full-scale SDR system. First, the generated frequency comb for driving the $μ$MUX was evaluated. Subsequently, by operating the SDR in direct loopback, the crosstalk of the individual channels after frequency demultiplexing was investigated. Finally, the system was used with a 16-channel $μ$MUX to evaluate the linearity of the SDR, and the noise contributed to the overall readout setup.
△ Less
Submitted 3 April, 2024;
originally announced April 2024.
-
RFSoC Gen3-Based Software-Defined Radio Characterization for the Readout System of Low-Temperature Bolometers
Authors:
M. E. García Redondo,
T. Muscheid,
R. Gartmann,
J. M. Salum,
L. P. Ferreyro,
N. A. Müller,
J. D. Bonilla-Neira,
J. M. Geria,
J. J. Bonaparte,
A. Almela,
L. E. Ardila-Perez,
M. R. Hampel,
A. E. Fuster,
M. Platino,
O. Sander,
M. Weber,
A. Etchegoyen
Abstract:
This work reports the performance evaluation of an SDR readout system based on the latest generation (Gen3) of the AMD's Radio Frequency System-on-Chip (RFSoC) processing platform, which integrates a full-stack processing system and a powerful FPGA with up to 32 high-speed and high-resolution 14-bit Digital-to-Analog Converters (DACs) and Analog-to-Digital Converters (ADCs). The proposed readout s…
▽ More
This work reports the performance evaluation of an SDR readout system based on the latest generation (Gen3) of the AMD's Radio Frequency System-on-Chip (RFSoC) processing platform, which integrates a full-stack processing system and a powerful FPGA with up to 32 high-speed and high-resolution 14-bit Digital-to-Analog Converters (DACs) and Analog-to-Digital Converters (ADCs). The proposed readout system uses a previously developed multi-band, double-conversion IQ RF-mixing board targeting a multiplexing factor of approximately 1,000 bolometers in a bandwidth between 4 and 8 GHz, in line with state-of-the-art microwave SQUID multiplexers ($μ$MUX). The characterization of the system was performed in two stages, under the conditions typically imposed by the multiplexer and the cold readout circuit. First, in transmission, showing that noise and spurious levels of the generated tones are close to the values imposed by the cold readout. Second, in RF loopback, presenting noise values better than -100 dBc/Hz totally in agreement with the state-of-the-art readout systems. It was demonstrated that the RFSoC Gen3 device is a suitable enabling technology for the next generation of superconducting detector readout systems, reducing system complexity, increasing system integration, and achieving these goals without performance degradation.
△ Less
Submitted 8 May, 2024; v1 submitted 6 November, 2023;
originally announced November 2023.
-
Lessons learned while develo** the Serenity-S1 ATCA card
Authors:
T. Mehner,
L. E. Ardila-Perez,
M. Balzer,
G. Fedi,
M. Fuchs,
A. Howard,
G. Iles,
M. Loutit,
S. Mansbridge,
F. Palla,
D. Parker,
M. Pesaresi,
A. Rose,
M. Saleh,
O. Sander,
M. Schleicher,
C. Strohman,
D. Tcherniakhovski,
T. Williams,
J. Zhao
Abstract:
The Serenity-S1 is a Xilinx Virtex Ultrascale+ based Advanced Telecommunications Computing Architecture (ATCA) processing blade that has been optimised for production. It incorporates many developments from the Serenity-A and Serenity-Z prototype cards and, where possible, adopts solutions being used across CERN. It also uses many new parts because commonly used parts have disappeared from the mar…
▽ More
The Serenity-S1 is a Xilinx Virtex Ultrascale+ based Advanced Telecommunications Computing Architecture (ATCA) processing blade that has been optimised for production. It incorporates many developments from the Serenity-A and Serenity-Z prototype cards and, where possible, adopts solutions being used across CERN. It also uses many new parts because commonly used parts have disappeared from the market during the semiconductor crisis, with only some returning.
Improvements to simplify manufacture, the performance of new components, some of the more difficult aspects of procurement, the performance of production-grade Samtec 25\,Gb/s optical firefly parts, and issues with the rack cooling infrastructure are discussed.
△ Less
Submitted 14 December, 2023; v1 submitted 3 November, 2023;
originally announced November 2023.
-
DTS-100G -- A versatile heterogeneous MPSoC board for cryogenic sensor readout
Authors:
Timo Muscheid,
Artur Boebel,
Nick Karcher,
Tomas Vanat,
Luis Ardila-Perez,
Igor Cheviakov,
Michael Schleicher,
Manfred Zimmer,
Matthias Balzer,
Oliver Sander
Abstract:
Heterogeneous devices such as the Multi-Processor System-on-Chip (MPSoC) from Xilinx are extremely valuable in custom instrumentation systems. This contribution presents the joint development of a heterogeneous MPSoC board called DTS-100G by DESY and KIT. The board is built around a Xilinx Zynq Ultrascale+ chip offering all available high-speed transceivers using QSFP28, 28 Gbps FireFly, FMC, and…
▽ More
Heterogeneous devices such as the Multi-Processor System-on-Chip (MPSoC) from Xilinx are extremely valuable in custom instrumentation systems. This contribution presents the joint development of a heterogeneous MPSoC board called DTS-100G by DESY and KIT. The board is built around a Xilinx Zynq Ultrascale+ chip offering all available high-speed transceivers using QSFP28, 28 Gbps FireFly, FMC, and FMC+ interfaces. The board is not designed for a particular application, but can be used as a generic DAQ platform for a variety of physics experiments. The DTS-100G board was successfully developed, built, and commissioned. ECHo-100k is the first experiment which will employ the board. This contribution shows the system architecture and explains how the DTS-100G board is a crucial component in the DAQ chain.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Split Boot -- True Network-Based Booting on Heterogeneous MPSoCs
Authors:
Marvin Fuchs,
Luis E. Ardila-Perez,
Torben Mehner,
Oliver Sander
Abstract:
In the context of the High-Luminosity (HL) upgrade of the LHC, many custom ATCA electronics boards are being designed containing heterogeneous System-on-Chip (SoC) devices, more specifically the Xilinx Zynq UltraScale+ (ZUS+) family. While the application varies greatly, these devices are regularly used for performing board management tasks, making them a fundamental element in the correct operati…
▽ More
In the context of the High-Luminosity (HL) upgrade of the LHC, many custom ATCA electronics boards are being designed containing heterogeneous System-on-Chip (SoC) devices, more specifically the Xilinx Zynq UltraScale+ (ZUS+) family. While the application varies greatly, these devices are regularly used for performing board management tasks, making them a fundamental element in the correct operation of the board. The large number of hundreds of SoC devices creates significant challenges in their firmware deployment, maintenance, and accessibility. Even though U-Boot on ZUS+ devices supports network boot through the Preboot Execution Environment (PXE), the standard ZUS+ boot process contains application-specific information at earlier boot steps, particularly within the First Stage Bootloader (FSBL). This prevents the initialization of several devices from a universal image. Inspired by the PXE boot process on desktop PCs, this paper describes split boot, a novel boot method tailored to the specific needs of the ZUS+. All application-specific configuration is moved to a network storage device and automatically fetched during the boot process. We considered the entire process, from firmware and software development to binary distribution in a large-scale system. The developed method nicely integrates with the standard Xilinx development toolset workflow.
△ Less
Submitted 25 January, 2023; v1 submitted 13 January, 2023;
originally announced January 2023.
-
Simultaneous MMC readout using a tailored μMUX based readout system
Authors:
Daniel Richter,
Mathias Wegner,
Felix Ahrens,
Christian Enss,
Nick Karcher,
Oliver Sander,
Constantin Schuster,
Marc Weber,
Thomas Wolber,
Sebastian Kempf
Abstract:
Magnetic microcalorimeters (MMCs) are cryogenic, energy-dispersive single-particle detectors providing excellent energy resolution, intrinsically fast signal rise time, quantum efficiency close to 100\%, large dynamic range as well as almost ideal linear response. One of the remaining challenges to be overcome to ultimately allow for the utilization of large-scale MMC based detector arrays with th…
▽ More
Magnetic microcalorimeters (MMCs) are cryogenic, energy-dispersive single-particle detectors providing excellent energy resolution, intrinsically fast signal rise time, quantum efficiency close to 100\%, large dynamic range as well as almost ideal linear response. One of the remaining challenges to be overcome to ultimately allow for the utilization of large-scale MMC based detector arrays with thousands to millions of individual pixels is the realization of a SQUID based multiplexing technique particularly tailored for MMC readout. Within this context, we report on the first truly multiplexed readout of an MMC based detector array using a frequency-division multiplexing approach realized by a custom microwave SQUID multiplexer based readout system.
△ Less
Submitted 27 March, 2023; v1 submitted 14 November, 2022;
originally announced November 2022.
-
Online Demodulation and Trigger for Flux-ramp Modulated SQUID Signals
Authors:
N. Karcher,
T. Muscheid,
T. Wolber,
D. Richter,
C. Enss,
S. Kempf,
O. Sander
Abstract:
Due to the periodic characteristics of SQUIDs, a suitable linearization technique is required for SQUID-based readout. Flux-ramp modulation is a common linearization technique and is typically applied for the readout of a microwave-SQUID-multiplexer as well as since recently also for dc-SQUIDs. Flux-ramp modulation requires another stage in the signal processing chain to demodulate the SQUID outpu…
▽ More
Due to the periodic characteristics of SQUIDs, a suitable linearization technique is required for SQUID-based readout. Flux-ramp modulation is a common linearization technique and is typically applied for the readout of a microwave-SQUID-multiplexer as well as since recently also for dc-SQUIDs. Flux-ramp modulation requires another stage in the signal processing chain to demodulate the SQUID output signal before further processing. For cryogenic microcalorimenters, these events are given by fast exponentially rising and slowly exponentially decaying pulses which shall be detected by a trigger engine and recorded by a storage logic. Since the data rate can be decreased significantly by demodulation and event detection, it is desirable to do both steps on the deployed fast FPGA logic during measurement before passing the data to a general-purpose processor.
In this contribution, we show the implementation of efficient multi-channel flux-ramp demodulation computed at run-time on a SoC-FPGA. Furthermore, a concept and implementation for an online trigger and buffer mechanism with its theoretical trigger loss rates depending on buffer size is presented. Both FPGA modules can be operated with up to 500 MHz clock frequency and can efficiently process 32 channels. Correct functionality and data reduction capability of the modules are demonstrated in measurements utilizing magnetic microcalorimeter irradiated with an Iron-55 source for event generation and read out by a microwave SQUID multiplexer.
△ Less
Submitted 22 October, 2021;
originally announced October 2021.
-
Flux ramp modulation based MHz frequency-division dc-SQUID multiplexer
Authors:
Daniel Richter,
Ludwig Hoibl,
Thomas Wolber,
Nick Karcher,
Andreas Fleischmann,
Christian Enss,
Marc Weber,
Oliver Sander,
Sebastian Kempf
Abstract:
We present a MHz frequency-division dc-SQUID multiplexer that is based on flux ramp modulation and a series array of $N$ identical current-sensing dc-SQUIDs with tightly coupled input coil. By running a periodic, sawtooth-shaped current signal through an additional modulation coil being tightly, but non-uniformly coupled to the individual SQUIDs, the voltage drop across the array changes according…
▽ More
We present a MHz frequency-division dc-SQUID multiplexer that is based on flux ramp modulation and a series array of $N$ identical current-sensing dc-SQUIDs with tightly coupled input coil. By running a periodic, sawtooth-shaped current signal through an additional modulation coil being tightly, but non-uniformly coupled to the individual SQUIDs, the voltage drop across the array changes according to the superposition of the flux-to-voltage characteristics of the individual SQUIDs within each cycle of the modulation signal. In this mode of operation, an input signal injected in the input coil of one of the SQUIDs and being quasi-static within a time frame adds a constant flux offset and leads to a phase shift of the associated SQUID characteristics. The latter is inherently proportional to the input signal and can be inferred by channelizing and down-converting the sampled array output voltage. Using a prototype multiplexer as well as a self-developed high-speed readout electronics for real-time phase determination, we demonstrate the simultaneous readout of four signal sources with MHz bandwidth per channel.
△ Less
Submitted 4 March, 2021; v1 submitted 16 January, 2021;
originally announced January 2021.
-
OpenIPMC: a free and open source Intelligent Platform Management Controller
Authors:
Luigi Calligaris,
André Cascadan,
Luis E. Ardila-Perez,
Bruno Casu,
Alison França da Costa,
Ailton Akira Shinoda,
Lucas Arruda Ramalho,
Oliver Sander
Abstract:
OpenIPMC is a free and open source firmware designed to operate as an Intelligent Platform Management Controller (IPMC). An IPMC is a fundamental component of electronic boards conformant to the Advanced Telecommunications Computing Architecture (ATCA) standard, currently being adopted by a number of high energy physics experiments, and is responsible for monitoring the health parameters of the bo…
▽ More
OpenIPMC is a free and open source firmware designed to operate as an Intelligent Platform Management Controller (IPMC). An IPMC is a fundamental component of electronic boards conformant to the Advanced Telecommunications Computing Architecture (ATCA) standard, currently being adopted by a number of high energy physics experiments, and is responsible for monitoring the health parameters of the board, managing its power states, and providing board control, debug and recovery functions to remote clients. OpenIPMC is based on the FreeRTOS real-time operating system and is designed to be architecture-independent, allowing it to be built for a variety of different Microcontrollers. Having a fully free and open source code is an innovative aspect for this kind of firmware, allowing full customization by the user. In this work we present the features and structure of OpenIPMC and its example implementations on Xilinx Zynq UltraScale+ (ZynqUS+), Espressif ESP32, and ST Microelectronics STM32 architectures.
△ Less
Submitted 1 June, 2021; v1 submitted 2 November, 2020;
originally announced November 2020.
-
The effective mitigation of greenhouse gas emissions from rice paddies without compromising yield by early-season drainage
Authors:
S. F. U. Islam,
J. W. van Groenigen,
L. S. Jensen,
B. O. Sander,
A. de Neergaard
Abstract:
Global rice production systems face two opposing challenges: the need to increase production to accommodate the world's growing population while simultaneously reducing greenhouse gas (GHG) emissions. Adaptations to drainage regimes are one of the most promising options for methane mitigation in rice production. Whereas several studies have focused on mid-season drainage (MD) to mitigate GHG emiss…
▽ More
Global rice production systems face two opposing challenges: the need to increase production to accommodate the world's growing population while simultaneously reducing greenhouse gas (GHG) emissions. Adaptations to drainage regimes are one of the most promising options for methane mitigation in rice production. Whereas several studies have focused on mid-season drainage (MD) to mitigate GHG emissions, early-season drainage (ED) varying in timing and duration has not been extensively studied. However, such ED periods could potentially be very effective since initial available Carbon levels (and thereby the potential for methanogenesis) can be very high in paddy systems with rice straw incorporation. This study tested the effectiveness of seven drainage regimes varying in their timing and duration (combinations of ED and MD) to mitigate methane (CH4) and nitrous oxide (N2O) emissions in a 101-day growth chamber experiment. Emissions were considerably reduced by early-season drainage compared to both conventional continuous flooding (CF) and the MD drainage regime. The results suggest that ED + MD drainage may have the potential to reduce methane emissions and yield-scaled global warming potential by 85 to 90% compared to CF and by 75 to 77% compared to MD only. A combination of (short or long) ED drainage and one MD drainage episode was found to be the most effective in mitigating methane emissions without negatively affecting yield. In particular, compared with CF, the long early-season drainage treatments LE + SM and LE + LM significantly decreased yield scaled global warming potential by 85% and 87% respectively. This was associated with carbon being stabilised early in the season, thereby reducing available carbon for methanogenesis. Overall nitrous oxide emissions were small and not significantly affected by ED.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
Reducing the impact of radioactivity on quantum circuits in a deep-underground facility
Authors:
Laura Cardani,
Francesco Valenti,
Nicola Casali,
Gianluigi Catelani,
Thibault Charpentier,
Massimiliano Clemenza,
Ivan Colantoni,
Angelo Cruciani,
Luca Gironi,
Lukas Grünhaupt,
Daria Gusenkova,
Fabio Henriques,
Marc Lagoin,
Maria Martinez,
Giorgio Pettinari,
Claudia Rusconi,
Oliver Sander,
Alexey V. Ustinov,
Marc Weber,
Wolfgang Wernsdorfer,
Marco Vignati,
Stefano Pirro,
Ioan M. Pop
Abstract:
As quantum coherence times of superconducting circuits have increased from nanoseconds to hundreds of microseconds, they are currently one of the leading platforms for quantum information processing. However, coherence needs to further improve by orders of magnitude to reduce the prohibitive hardware overhead of current error correction schemes. Reaching this goal hinges on reducing the density of…
▽ More
As quantum coherence times of superconducting circuits have increased from nanoseconds to hundreds of microseconds, they are currently one of the leading platforms for quantum information processing. However, coherence needs to further improve by orders of magnitude to reduce the prohibitive hardware overhead of current error correction schemes. Reaching this goal hinges on reducing the density of broken Cooper pairs, so-called quasiparticles. Here, we show that environmental radioactivity is a significant source of nonequilibrium quasiparticles. Moreover, ionizing radiation introduces time-correlated quasiparticle bursts in resonators on the same chip, further complicating quantum error correction. Operating in a deep-underground lead-shielded cryostat decreases the quasiparticle burst rate by a factor fifty and reduces dissipation up to a factor four, showcasing the importance of radiation abatement in future solid-state quantum hardware.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Software-defined Radio Readout System for the ECHo Experiment
Authors:
Oliver Sander,
Nick Karcher,
Oliver Krömer,
Marc Weber,
Sebastian Kempf,
Mathias Wegner,
Christian Enss
Abstract:
Metallic magnetic calorimeters (MMCs) are cryogenic detectors that offer an excellent energy resolution, a signal rise time of <100 ns, a high dynamic range and almost optimal linearity. MMCs are of high interest for many experiments. One of them, the ECHo experiment, requires the utilization of large MMC detector arrays. The readout of such MMC arrays is a challenging task, which can be tackled u…
▽ More
Metallic magnetic calorimeters (MMCs) are cryogenic detectors that offer an excellent energy resolution, a signal rise time of <100 ns, a high dynamic range and almost optimal linearity. MMCs are of high interest for many experiments. One of them, the ECHo experiment, requires the utilization of large MMC detector arrays. The readout of such MMC arrays is a challenging task, which can be tackled using software-defined radios (SDRs). Though SDR is a well-known approach in communications engineering, a dedicated implementation for frequency division multiplexed readout of MMCs is new and one of the technological key elements of the ECHo project. ECHo will be the first experiment to use microwave SQUID multiplexed MMC detectors and therefore pioneering the hardware, firmware and software development in this domain. This paper presents the detailed concepts and current status of the development.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.