-
Hypernuclear event detection in the nuclear emulsion with Monte Carlo simulation and machine learning
Authors:
A. Kasagi,
W. Dou,
V. Drozd,
H. Ekawa,
S. Escrig,
Y. Gao,
Y. He,
E. Liu,
A. Muneem,
M. Nakagawa,
K. Nakazawa,
C. Rappold,
N. Saito,
T. R. Saito,
S. Sugimoto,
M. Taki,
Y. K. Tanaka,
A. Yanai,
J. Yoshida,
M. Yoshimoto,
H. Wang
Abstract:
This study developed a novel method for detecting hypernuclear events recorded in nuclear emulsion sheets using machine learning techniques. The artificial neural network-based object detection model was trained on surrogate images created through Monte Carlo simulations and image-style transformations using generative adversarial networks. The performance of the proposed model was evaluated using…
▽ More
This study developed a novel method for detecting hypernuclear events recorded in nuclear emulsion sheets using machine learning techniques. The artificial neural network-based object detection model was trained on surrogate images created through Monte Carlo simulations and image-style transformations using generative adversarial networks. The performance of the proposed model was evaluated using $α$-decay events obtained from the J-PARC E07 emulsion data. The model achieved approximately twice the detection efficiency of conventional image processing and reduced the time spent on manual visual inspection by approximately 1/17. The established method was successfully applied to the detection of hypernuclear events. This approach is a state-of-the-art tool for discovering rare events recorded in nuclear emulsion sheets without any real data for training.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Study on the reusability of fluorescent nuclear track detectors using optical bleaching
Authors:
Abdul Muneem,
Junya Yoshida,
Hiroyuki Ekawa,
Masahiro Hino,
Katsuya Hirota,
Go Ichikawa,
Ayumi Kasagi,
Masaaki Kitaguchi,
Satoshi Kodaira,
Kenji Mishima,
Jameel-Un Nabi,
Manami Nakagawa,
Michio Sakashita,
Norihito Saito,
Takehiko R. Saito,
Satoshi Wada,
Nakahiro Yasuda
Abstract:
Fluorescent nuclear track detectors (FNTDs) based on Al${_2}$O${_3}$:C,Mg crystals are luminescent detectors that can be used for dosimetry and detection of charged particles and neutrons. These detectors can be utilised for imaging applications where a reasonably high track density, approximately of the order of 1 $\times$ $10^4$ tracks in an area of 100 $\times$ 100 $μ$m$^2$, is required. To inv…
▽ More
Fluorescent nuclear track detectors (FNTDs) based on Al${_2}$O${_3}$:C,Mg crystals are luminescent detectors that can be used for dosimetry and detection of charged particles and neutrons. These detectors can be utilised for imaging applications where a reasonably high track density, approximately of the order of 1 $\times$ $10^4$ tracks in an area of 100 $\times$ 100 $μ$m$^2$, is required. To investigate the reusability of FNTDs for imaging applications, we present an approach to perform optical bleaching under the required track density conditions. The reusability was assessed through seven irradiation-bleaching cycles. For the irradiation, the studied FNTD was exposed to alpha-particles from an $^{241}$Am radioactive source. The optical bleaching was performed by means of ultraviolet laser light with a wavelength of 355 nm. Three dedicated regions on a single FNTD with different accumulated track densities and bleaching conditions were investigated. After every irradiation-bleaching cycle, signal-to-noise ratio was calculated to evaluate FNTD performance. It is concluded that FNTDs can be reused at least seven times for applications where accumulation of a high track density is required.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
Investigation of the neutron imaging applications using fine-grained nuclear emulsion
Authors:
Abdul Muneem,
Junya Yoshida,
Hiroyuki Ekawa,
Masahiro Hino,
Katsuya Hirota,
Go Ichikawa,
Ayumi Kasagi,
Masaaki Kitaguchi,
Naoto Muto,
Kenji Mishima,
Jameel-Un Nabi,
Manami Nakagawa,
Naotaka Naganawa,
Takehiko R. Saito
Abstract:
Neutron imaging is a non-destructive inspection technique with a wide range of applications. One of the important aspects concerning neutron imaging is achieving micrometer-scale spatial resolution. Develo** a neutron detector with a high resolution is a challenging task. Neutron detectors, based on fine-grained nuclear emulsion, may be suitable for high resolution neutron imaging applications.…
▽ More
Neutron imaging is a non-destructive inspection technique with a wide range of applications. One of the important aspects concerning neutron imaging is achieving micrometer-scale spatial resolution. Develo** a neutron detector with a high resolution is a challenging task. Neutron detectors, based on fine-grained nuclear emulsion, may be suitable for high resolution neutron imaging applications. High track density is a necessary requirement to improve the quality of neutron imaging. However, the available track analysis methods are difficult to apply under high track density conditions. Simulated images were used to determine the required track density for neutron imaging. It was concluded that a track density of the order of $10^4$ tracks per 100 $\times$ 100 $μ$m$^2$ is sufficient to utilize neutron detectors for imaging applications. The contrast resolution was also investigated for the image data sets with various track densities and neutron transmission rates. Moreover, experiments were performed for neutron imaging of the gadolinium-based gratings with known geometries. The structure of gratings was successfully resolved. The calculated 1$σ$ 10-90 \% edge response, using the gray scale optical images of the grating slit with a periodic structure of 9 $μ$m, was 0.945 $\pm$ 0.004 $μ$m.
△ Less
Submitted 6 December, 2022; v1 submitted 30 October, 2022;
originally announced October 2022.
-
Photonuclear reactions with Zinc: A case for clinical linacs
Authors:
I. Boztosun,
H. Đapo,
M. Karakoç,
S. F. Özmen,
Y. Çeçen,
A. Çoban,
T. Caner,
E. Bayram,
T. R. Saito,
T. Akdoğan,
V. Bozkurt,
Y. Kuçuk,
D. Kaya,
M. N. Harakeh
Abstract:
The use of bremsstrahlung photons produced by a linac to induce photonuclear reactions is wide spread. However, using a clinical linac to produce the photons is a new concept. We aimed to induce photonuclear reactions on zinc isotopes and measure the subsequent transition energies and half-lives. For this purpose, a bremsstrahlung photon beam of 18 MeV endpoint energy produced by the Philips SLI-2…
▽ More
The use of bremsstrahlung photons produced by a linac to induce photonuclear reactions is wide spread. However, using a clinical linac to produce the photons is a new concept. We aimed to induce photonuclear reactions on zinc isotopes and measure the subsequent transition energies and half-lives. For this purpose, a bremsstrahlung photon beam of 18 MeV endpoint energy produced by the Philips SLI-25 linac has been used. The subsequent decay has been measured with a well-shielded single HPGe detector. The results obtained for transition energies are in good agreement with the literature data and in many cases surpass these in accuracy. For the half-lives, we are in agreement with the literature data, but do not achieve their precision. The obtained accuracy for the transition energies show what is achievable in an experiment such as ours. We demonstrate the usefulness and benefits of employing clinical linacs for nuclear physics experiments.
△ Less
Submitted 14 September, 2015;
originally announced September 2015.
-
A Large-Scale FPGA-Based Trigger and Dead-Time Free DAQ System for the Kaos Spectrometer at MAMI
Authors:
P. Achenbach,
C. Ayerbe Gayoso,
J. C. Bernauer,
R. Böhm,
D. Bosnar,
L. Debenjak,
M. O. Distler,
A. Esser,
I. Friščić,
M. Gómez Rodríguez de la Paz,
J. Hoffmann,
M. Makek,
H. Merkel,
S. Minami,
U. Müller,
L. Nungesser,
W. Ott,
J. Pochodzalla,
M. Potokar,
I. Rusanov,
T. R. Saito,
S. Sánchez Majos,
B. S. Schlimme,
S. Širca,
S. Voltz
, et al. (2 additional authors not shown)
Abstract:
The Kaos spectrometer is maintained by the A1 collaboration at the Mainz Microtron MAMI with a focus on the study of (e,e'K^+) coincidence reactions. For its electron-arm two vertical planes of fiber arrays, each comprising approximately 10 000 fibers, are operated close to zero degree scattering angle and in close proximity to the electron beam. A nearly dead-time free DAQ system to acquire timin…
▽ More
The Kaos spectrometer is maintained by the A1 collaboration at the Mainz Microtron MAMI with a focus on the study of (e,e'K^+) coincidence reactions. For its electron-arm two vertical planes of fiber arrays, each comprising approximately 10 000 fibers, are operated close to zero degree scattering angle and in close proximity to the electron beam. A nearly dead-time free DAQ system to acquire timing and tracking information has been installed for this spectrometer arm. The signals of 144 multi-anode photomultipliers are collected by 96-channel front-end boards, digitized by double-threshold discriminators and the signal time is picked up by state-of-the-art F1 time-to-digital converter chips. In order to minimize background rates a sophisticated trigger logic was implemented in newly developed Vuprom modules. The trigger performs noise suppression, signal cluster finding, particle tracking, and coincidence timing, and can be expanded for kinematical matching (e'K^+) coincidences. The full system was designed to process more than 4 000 read-out channels and to cope with the high electron flux in the spectrometer and the high count rate requirement of the detectors. It was successfully in-beam tested at MAMI in 2009.
△ Less
Submitted 1 May, 2011;
originally announced May 2011.
