-
A hybrid atom tweezer array of nuclear spin and optical clock qubits
Authors:
Yuma Nakamura,
Toshi Kusano,
Rei Yokoyama,
Keito Saito,
Koichiro Higashi,
Naoya Ozawa,
Tetsushi Takano,
Yosuke Takasu,
Yoshiro Takahashi
Abstract:
While data qubits with a long coherence time are essential for the storage of quantum information, ancilla qubits are pivotal in quantum error correction (QEC) for fault-tolerant quantum computing. The recent development of optical tweezer arrays, such as the preparation of large-scale qubit arrays and high-fidelity gate operations, offers the potential for realizing QEC protocols, and one of the…
▽ More
While data qubits with a long coherence time are essential for the storage of quantum information, ancilla qubits are pivotal in quantum error correction (QEC) for fault-tolerant quantum computing. The recent development of optical tweezer arrays, such as the preparation of large-scale qubit arrays and high-fidelity gate operations, offers the potential for realizing QEC protocols, and one of the important next challenges is to control and detect ancilla qubits while minimizing atom loss and crosstalk. Here, we present the realization of a hybrid system consisting of a dual-isotope ytterbium (Yb) atom array, in which we can utilize a nuclear spin qubit of fermionic ${}^{171}\mathrm{Yb}$ as a data qubit and an optical clock qubit of bosonic ${}^{174}\mathrm{Yb}$ as an ancilla qubit with a capacity of non-destructive qubit readout. We evaluate the crosstalk between qubits regarding the impact on the coherence of the nuclear spin qubits from the imaging light for ${}^{174}\mathrm{Yb}$. The Ramsey sequence with a 556 nm probe beam shows negligible influence on the coherence up to 100 ms exposure time. In the Hahn-echo sequence with a 399 nm probe and 556 nm cooling beams for ${}^{174}\mathrm{Yb}$, we observe retaining a 98.4(2.1) % coherence under 30 ms exposure. This result highlights the potential of the hybrid-Yb atom array for ancilla-qubit-based QEC protocols.
△ Less
Submitted 27 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Combined Pre-Supernova Alert System with Kamland and Super-Kamiokande
Authors:
KamLAND,
Super-Kamiokande Collaborations,
:,
Seisho Abe,
Minori Eizuka,
Sawako Futagi,
Azusa Gando,
Yoshihito Gando,
Shun Goto,
Takahiko Hachiya,
Kazumi Hata,
Koichi Ichimura,
Sei Ieki,
Haruo Ikeda,
Kunio Inoue,
Koji Ishidoshiro,
Yuto Kamei,
Nanami Kawada,
Yasuhiro Kishimoto,
Masayuki Koga,
Maho Kurasawa,
Tadao Mitsui,
Haruhiko Miyake,
Daisuke Morita,
Takeshi Nakahata
, et al. (290 additional authors not shown)
Abstract:
Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are ob…
▽ More
Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are observed, an early warning of the upcoming core-collapse supernova can be provided. In light of this, KamLAND and Super-Kamiokande, both located in the Kamioka mine in Japan, have been monitoring pre-supernova neutrinos since 2015 and 2021, respectively. Recently, we performed a joint study between KamLAND and Super-Kamiokande on pre-supernova neutrino detection. A pre-supernova alert system combining the KamLAND detector and the Super-Kamiokande detector was developed and put into operation, which can provide a supernova alert to the astrophysics community. Fully leveraging the complementary properties of these two detectors, the combined alert is expected to resolve a pre-supernova neutrino signal from a 15 M$_{\odot}$ star within 510 pc of the Earth, at a significance level corresponding to a false alarm rate of no more than 1 per century. For a Betelgeuse-like model with optimistic parameters, it can provide early warnings up to 12 hours in advance.
△ Less
Submitted 1 July, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Crystalformer: Infinitely Connected Attention for Periodic Structure Encoding
Authors:
Tatsunori Taniai,
Ryo Igarashi,
Yuta Suzuki,
Naoya Chiba,
Kotaro Saito,
Yoshitaka Ushiku,
Kanta Ono
Abstract:
Predicting physical properties of materials from their crystal structures is a fundamental problem in materials science. In peripheral areas such as the prediction of molecular properties, fully connected attention networks have been shown to be successful. However, unlike these finite atom arrangements, crystal structures are infinitely repeating, periodic arrangements of atoms, whose fully conne…
▽ More
Predicting physical properties of materials from their crystal structures is a fundamental problem in materials science. In peripheral areas such as the prediction of molecular properties, fully connected attention networks have been shown to be successful. However, unlike these finite atom arrangements, crystal structures are infinitely repeating, periodic arrangements of atoms, whose fully connected attention results in infinitely connected attention. In this work, we show that this infinitely connected attention can lead to a computationally tractable formulation, interpreted as neural potential summation, that performs infinite interatomic potential summations in a deeply learned feature space. We then propose a simple yet effective Transformer-based encoder architecture for crystal structures called Crystalformer. Compared to an existing Transformer-based model, the proposed model requires only 29.4% of the number of parameters, with minimal modifications to the original Transformer architecture. Despite the architectural simplicity, the proposed method outperforms state-of-the-art methods for various property regression tasks on the Materials Project and JARVIS-DFT datasets.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Resilient Design in Nuclear Energy: Critical Lessons from a Cross-Disciplinary Review of the Fukushima Dai-ichi Nuclear Accident
Authors:
Ali Ayoub,
Haruko Wainwright,
Giovanni Sansavini,
Randall Gauntt,
Kimiaki Saito
Abstract:
Nuclear energy has been gaining momentum recently as one of the solutions to tackle climate change. However, significant environmental and health-risk concerns remain associated with potential accidents. Despite significant preventive efforts, we must acknowledge that accidents may happen and, therefore, develop strategies and technologies for mitigating their consequences. In this paper, we revie…
▽ More
Nuclear energy has been gaining momentum recently as one of the solutions to tackle climate change. However, significant environmental and health-risk concerns remain associated with potential accidents. Despite significant preventive efforts, we must acknowledge that accidents may happen and, therefore, develop strategies and technologies for mitigating their consequences. In this paper, we review the Fukushima Dai-ichi Nuclear Power Plant accident, synthesize the time series and accident progressions across relevant disciplines, including in-plant physics and engineering systems, operators' actions, emergency responses, meteorology, radionuclide release and transport, land contamination, and health impacts. In light of the latest observations and simulation studies, we identify three key factors that exacerbated the consequences of the accident: (1) the failure of Unit 2 containment venting, (2) the insufficient integration of radiation measurements and meteorology data in the evacuation strategy, and (3) the limited risk assessment and emergency preparedness. We propose new research and development directions to improve the resilience of nuclear power plants, including (1) meteorology-informed proactive venting, (2) machine learning-enabled adaptive evacuation zones, and (3) comprehensive risk-informed emergency planning while leveraging the experience from responses to other disasters.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Neural Structure Fields with Application to Crystal Structure Autoencoders
Authors:
Naoya Chiba,
Yuta Suzuki,
Tatsunori Taniai,
Ryo Igarashi,
Yoshitaka Ushiku,
Kotaro Saito,
Kanta Ono
Abstract:
Representing crystal structures of materials to facilitate determining them via neural networks is crucial for enabling machine-learning applications involving crystal structure estimation. Among these applications, the inverse design of materials can contribute to explore materials with desired properties without relying on luck or serendipity. We propose neural structure fields (NeSF) as an accu…
▽ More
Representing crystal structures of materials to facilitate determining them via neural networks is crucial for enabling machine-learning applications involving crystal structure estimation. Among these applications, the inverse design of materials can contribute to explore materials with desired properties without relying on luck or serendipity. We propose neural structure fields (NeSF) as an accurate and practical approach for representing crystal structures using neural networks. Inspired by the concepts of vector fields in physics and implicit neural representations in computer vision, the proposed NeSF considers a crystal structure as a continuous field rather than as a discrete set of atoms. Unlike existing grid-based discretized spatial representations, the NeSF overcomes the tradeoff between spatial resolution and computational complexity and can represent any crystal structure. We propose an autoencoder of crystal structures that can recover various crystal structures, such as those of perovskite structure materials and cuprate superconductors. Extensive quantitative results demonstrate the superior performance of the NeSF compared with the existing grid-based approach.
△ Less
Submitted 13 December, 2023; v1 submitted 8 December, 2022;
originally announced December 2022.
-
Topological Speed Limit
Authors:
Tan Van Vu,
Keiji Saito
Abstract:
Any physical system evolves at a finite speed that is constrained not only by the energetic cost but also by the topological structure of the underlying dynamics. In this Letter, by considering such structural information, we derive a unified topological speed limit for the evolution of physical states using an optimal transport approach. We prove that the minimum time required for changing states…
▽ More
Any physical system evolves at a finite speed that is constrained not only by the energetic cost but also by the topological structure of the underlying dynamics. In this Letter, by considering such structural information, we derive a unified topological speed limit for the evolution of physical states using an optimal transport approach. We prove that the minimum time required for changing states is lower bounded by the discrete Wasserstein distance, which encodes the topological information of the system, and the time-averaged velocity. The bound obtained is tight and applicable to a wide range of dynamics, from deterministic to stochastic, and classical to quantum systems. In addition, the bound provides insight into the design principles of the optimal process that attains the maximum speed. We demonstrate the application of our results to chemical reaction networks and interacting many-body quantum systems.
△ Less
Submitted 6 December, 2022; v1 submitted 7 July, 2022;
originally announced July 2022.
-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
Intrinsic coercivity induced by valence fluctuations in $4f$-$3d$ intermetallic magnets
Authors:
H. Shishido,
T. Ueno,
K. Saito,
M. Sawada,
M. Matsumoto
Abstract:
Temperature dependence of magnetization curves of well homogenized samples of Ce(Co$_{1-x}$Cu$_{x}$)$_5$ ($0\le x \le 0.7$), a family of representative $4f$-$3d$ intermetallic magnets found in rare-earth permanent magnets, is measured. A remarkable enhancement of intrinsic coercivity is observed with $x=0.3$ and $x=0.4$, persisting to higher temperatures. This experimental observation is theoretic…
▽ More
Temperature dependence of magnetization curves of well homogenized samples of Ce(Co$_{1-x}$Cu$_{x}$)$_5$ ($0\le x \le 0.7$), a family of representative $4f$-$3d$ intermetallic magnets found in rare-earth permanent magnets, is measured. A remarkable enhancement of intrinsic coercivity is observed with $x=0.3$ and $x=0.4$, persisting to higher temperatures. This experimental observation is theoretically attributed to an effect of electronic correlation among $4f$-electrons. That is, an intrinsic pinning happens originating in an anomalously enhanced magnetic anisotropy energy contributed by an order of magnitude stronger charge-transfer process between $4f$-electrons and $3d$-electrons, than the conventional crystal field effects. It is demonstrated that the $4f$-$3d$ charge-transfer process depends on the direction of magnetization in the middle of a crossover of the valence state of Ce between CeCu$_5$ with robust Ce$^{3+}$ and CeCo$_5$ with the mixed valence state.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Measurement of ion displacement via RF power variation for excess micromotion compensation
Authors:
Ryoichi Saito,
Kota Saito,
Takashi Mukaiyama
Abstract:
We demonstrate a method of micromotion minimization of a trapped ion in a linear Paul trap based on the precision measurement of the ion trap** position displacement due to a stray electric field in the radial plane by ion fluorescence imaging. The amount of displacement in the radial plane is proportional to the strength of a stray electric field. Therefore, we evaluated the micromotion compens…
▽ More
We demonstrate a method of micromotion minimization of a trapped ion in a linear Paul trap based on the precision measurement of the ion trap** position displacement due to a stray electric field in the radial plane by ion fluorescence imaging. The amount of displacement in the radial plane is proportional to the strength of a stray electric field. Therefore, we evaluated the micromotion compensation condition by measuring the ion displacements from the ion equilibrium position using two different radial trap frequencies with various combinations of the compensation voltage. The residual electric field uncertainty of this technique reached a few volts per meter. This compensation technique does not depend on the orientation of the incident cooling laser or the detuning and imaging direction. Therefore, this method is suitable for a planar ion trap, a stylus ion trap, which limits the propagation angle of lasers, or miniaturized ion trap systems for sensing and metrological applications.
△ Less
Submitted 2 March, 2021; v1 submitted 1 February, 2021;
originally announced February 2021.
-
Observations of the Origin of Downward Terrestrial Gamma-Ray Flashes
Authors:
J. W. Belz,
P. R. Krehbiel,
J. Remington,
M. A. Stanley,
R. U. Abbasi,
R. LeVon,
W. Rison,
D. Rodeheffer,
the Telescope Array Scientific Collaboration,
:,
T. Abu-Zayyad,
M. Allen,
E. Barcikowski,
D. R. Bergman,
S. A. Blake,
M. Byrne,
R. Cady,
B. G. Cheon,
M. Chikawa,
A. di Matteo,
T. Fujii,
K. Fujita,
R. Fujiwara,
M. Fukushima,
G. Furlich
, et al. (116 additional authors not shown)
Abstract:
In this paper we report the first close, high-resolution observations of downward-directed terrestrial gamma-ray flashes (TGFs) detected by the large-area Telescope Array cosmic ray observatory, obtained in conjunction with broadband VHF interferometer and fast electric field change measurements of the parent discharge. The results show that the TGFs occur during strong initial breakdown pulses (I…
▽ More
In this paper we report the first close, high-resolution observations of downward-directed terrestrial gamma-ray flashes (TGFs) detected by the large-area Telescope Array cosmic ray observatory, obtained in conjunction with broadband VHF interferometer and fast electric field change measurements of the parent discharge. The results show that the TGFs occur during strong initial breakdown pulses (IBPs) in the first few milliseconds of negative cloud-to-ground and low-altitude intracloud flashes, and that the IBPs are produced by a newly-identified streamer-based discharge process called fast negative breakdown. The observations indicate the relativistic runaway electron avalanches (RREAs) responsible for producing the TGFs are initiated by embedded spark-like transient conducting events (TCEs) within the fast streamer system, and potentially also by individual fast streamers themselves. The TCEs are inferred to be the cause of impulsive sub-pulses that are characteristic features of classic IBP sferics. Additional development of the avalanches would be facilitated by the enhanced electric field ahead of the advancing front of the fast negative breakdown. In addition to showing the nature of IBPs and their enigmatic sub-pulses, the observations also provide a possible explanation for the unsolved question of how the streamer to leader transition occurs during the initial negative breakdown, namely as a result of strong currents flowing in the final stage of successive IBPs, extending backward through both the IBP itself and the negative streamer breakdown preceding the IBP.
△ Less
Submitted 12 October, 2020; v1 submitted 29 September, 2020;
originally announced September 2020.
-
Discovery Of Copper Catalyst For New Chemical Polishing Acid On Superconducting Niobium
Authors:
Didi Luo,
Kenji Saito
Abstract:
High field Q-slope (HFQS) seriously limits the high gradient performance of the buffered chemically polished (BCP) superconducting radio frequency (SRF) niobium cavities. The direct cause or mechanism is not yet fully understood. In our recent extensive data analysis, we concluded that the potential root cause could be nitrogen contamination on the surface. The nitric contamination could be create…
▽ More
High field Q-slope (HFQS) seriously limits the high gradient performance of the buffered chemically polished (BCP) superconducting radio frequency (SRF) niobium cavities. The direct cause or mechanism is not yet fully understood. In our recent extensive data analysis, we concluded that the potential root cause could be nitrogen contamination on the surface. The nitric contamination could be created by nitric acid during BCP which uses the mixture of hydrofluoric acid, nitric acid, and phosphoric acid. Based on this thought, we started to develop a new chemical polishing acid that replaces the nitric acid by hydrogen peroxide. We have discovered that this new acid cannot provide smooth surface finishing, however adding copper catalyst allows this acid to provide a smooth surface similar to or even better than that from the conventional BCP. This paper first shows the significance of resolving HFQS, then summarizes our extensive data analysis results, and finally describes our discovery of the copper catalyst.
△ Less
Submitted 7 January, 2020;
originally announced January 2020.
-
Nitrogen Contamination Causes High Field Q-Slope (HFQS) in Buffered Chemical Polished SRF Cavities
Authors:
D. Luo,
K. Saito,
S. Shanab
Abstract:
Buffered Chemical Polishing (BCP) was the most conventional polishing method for superconducting radio frequency (SRF) Niobium (Nb) cavity surface preparation before the discovery of Electropolishing (EP), which is superior to BCP in high gradient performance. The High Field Q-slope (HFQS) is perfectly eliminated by taking the low temperature bake (LTB) post EP, which guarantees high gradient perf…
▽ More
Buffered Chemical Polishing (BCP) was the most conventional polishing method for superconducting radio frequency (SRF) Niobium (Nb) cavity surface preparation before the discovery of Electropolishing (EP), which is superior to BCP in high gradient performance. The High Field Q-slope (HFQS) is perfectly eliminated by taking the low temperature bake (LTB) post EP, which guarantees high gradient performance in EP'ed cavities. The mechanism of the HFQS is well understood for EP'ed cavities. On the other hand, there is no common consensus on the HFQS with BCP, since even BCP with LTB does not always resolve the HFQS. BCP is much easier to apply and still an important preparation technology for very complicated SRF structures like low beta cavities. Therefore, overcoming the issue of HFQS with BCP is highly beneficial to the SRF community. This paper mines a large number of available data sets on BCP'ed cavity performance with fine grain, large grain, and even single crystal niobium materials under different experimental settings. We found that all existing explanations for HFQS with BCP are inconsistent with some experimental results, and propounded nitrogen contamination as a new model. We checked that nitrogen contamination agrees with all existing data and nicely explains unresolved phenomena. Combining these evidence, we deduce that nitrogen contamination is the cause of HFQS in BCP.
△ Less
Submitted 30 March, 2019;
originally announced April 2019.
-
Dynamic Block Matching to assess the longitudinal component of the dense motion field of the carotid artery wall in B-mode ultrasound sequences -- Association with coronary artery disease
Authors:
Guillaume Zahnd,
Kozue Saito,
Kazuyuki Nagatsuka,
Yoshito Otake,
Yoshinobu Sato
Abstract:
Purpose: The motion of the common carotid artery tissue layers along the vessel axis during the cardiac cycle, observed in ultrasound imaging, is associated with the presence of established cardiovascular risk factors. However, the vast majority of the methods are based on the tracking of a single point, thus failing to capture the overall motion of the entire arterial wall. The aim of this work i…
▽ More
Purpose: The motion of the common carotid artery tissue layers along the vessel axis during the cardiac cycle, observed in ultrasound imaging, is associated with the presence of established cardiovascular risk factors. However, the vast majority of the methods are based on the tracking of a single point, thus failing to capture the overall motion of the entire arterial wall. The aim of this work is to introduce a motion tracking framework able to simultaneously extract the trajectory of a large collection of points spanning the entire exploitable width of the image.
Method: The longitudinal motion, which is the main focus of the present work, is determined in two steps. First, a series of independent block matching operations are carried out for all the tracked points. Then, an original dynamic-programming approach is exploited to regularize the collection of similarity maps and estimate the globally optimal motion over the entire vessel wall. Sixty-two atherosclerotic participants at high cardiovascular risk were involved in this study.
Results: A dense displacement field, describing the longitudinal motion of the carotid far wall over time, was extracted. For each cine-loop, the method was evaluated against manual reference tracings performed on three local points, with an average absolute error of 150+/-163 um. A strong correlation was found between motion inhomogeneity and the presence of coronary artery disease (beta-coefficient=0.586, p=0.003).
Conclusions: To the best of our knowledge, this is the first time that a method is specifically proposed to assess the dense motion field of the carotid far wall. This approach has potential to evaluate the (in)homogeneity of the wall dynamics. The proposed method has promising performances to improve the analysis of arterial longitudinal motion and the understanding of the underlying patho-physiological parameters.
△ Less
Submitted 18 May, 2020; v1 submitted 6 September, 2018;
originally announced September 2018.
-
Fractional diffusion equation description of an open anomalous heat conduction set-up
Authors:
Aritra Kundu,
Cédric Bernardin,
Keji Saito,
Anupam Kundu,
Abhishek Dhar
Abstract:
We provide a stochastic fractional diffusion equation description of energy transport through a finite one-dimensional chain of harmonic oscillators with stochastic momentum exchange and connected to Langevian type heat baths at the boundaries. By establishing an unambiguous finite domain representation of the associated fractional operator, we show that this equation can correctly reproduce equil…
▽ More
We provide a stochastic fractional diffusion equation description of energy transport through a finite one-dimensional chain of harmonic oscillators with stochastic momentum exchange and connected to Langevian type heat baths at the boundaries. By establishing an unambiguous finite domain representation of the associated fractional operator, we show that this equation can correctly reproduce equilibrium properties like Green-Kubo formula as well as non-equilibrium properties like the steady state temperature and current. In addition, this equation provides the exact time evolution of the temperature profile. Taking insights from the diffusive system and from numerical simulations, we pose a conjecture that these long-range correlations in the steady state are given by the inverse of the fractional operator. We also point out some interesting properties of the spectrum of the fractional operator. All our analytical results are supplemented with extensive numerical simulations of the microscopic system.
△ Less
Submitted 31 August, 2018;
originally announced August 2018.
-
Towards Better Problem Finding and Creativity in Graduate School Education
Authors:
Ankit A. Ravankar,
Shotaro Imai,
Abhijeet Ravankar,
Tomomichi Kato,
Taichi Takasuka,
Teruyuki Tsuji,
Kaori K. Shigetomi,
Ken Saito
Abstract:
The current graduate school education system has largely been focusing on producing better learners and problem solvers. The rise of problem based learning approaches are testimonial to the importance of such skills at all levels of education from early childhood to graduate school level. However, most of the programs so far have focused primarily on producing better problem solvers neglecting pro…
▽ More
The current graduate school education system has largely been focusing on producing better learners and problem solvers. The rise of problem based learning approaches are testimonial to the importance of such skills at all levels of education from early childhood to graduate school level. However, most of the programs so far have focused primarily on producing better problem solvers neglecting problem finding at large. Problem finding, an important skill is a subset and first step in creative problem solving. Most studies on problem finding skills have only focused on industries and corporations for training employees to think out of the box for innovative product design and development. At school or university level, students are generally given a well-defined problem in most Problem Based Learning (PBL) scenarios and problem discovery or how to deal with ill-structured problems is mostly ignored. In this study, we present the Nitobe School Program and discuss our unique curriculum to teach problem finding in graduate school education. We show how introducing problem finding at graduate level increases student's ability to comprehend difficult and wicked problems in a team based learning environment. Moreover, we present how it influences creativity in graduate students resulting in better problem solvers.
△ Less
Submitted 6 July, 2018;
originally announced July 2018.
-
Mn$_2$VAl Heusler alloy thin films: Appearance of antiferromagnetism and an exchange bias in a layered structure with Fe
Authors:
Tomoki Tsuchiya,
Ryota Kobayashi,
Takahide Kubota,
Kotaro Saito,
Kanta Ono,
Takashi Ohhara,
Akiko Nakao,
Koki Takanashi
Abstract:
Mn$_2$VAl Heusler alloy films were epitaxially grown on MgO(100) single crystal substrates by means of ultra-high-vacuum magnetron sputtering. A2 and L2$_1$ type Mn$_2$VAl order was controlled by the deposition temperatures. A2-type Mn$_2$VAl films showed no spontaneous magnetization and L2$_1$-type Mn$_2$VAl films showed ferrimagnetic behavior with a maximum saturation magnetization of 220 emu/cm…
▽ More
Mn$_2$VAl Heusler alloy films were epitaxially grown on MgO(100) single crystal substrates by means of ultra-high-vacuum magnetron sputtering. A2 and L2$_1$ type Mn$_2$VAl order was controlled by the deposition temperatures. A2-type Mn$_2$VAl films showed no spontaneous magnetization and L2$_1$-type Mn$_2$VAl films showed ferrimagnetic behavior with a maximum saturation magnetization of 220 emu/cm$^3$ at room temperature. An antiferromagnetic reflection was observed with neutron diffraction at room temperature for an A2-type Mn$_2$VAl film deposited at 400$^\circ$C. A bilayer sample of the antiferromagnetic A2 Mn$_2$VAl and Fe showed an exchange bias of 120 Oe at 10 K.
△ Less
Submitted 20 July, 2017;
originally announced July 2017.
-
Gamma-ray Showers Observed at Ground Level in Coincidence With Downward Lightning Leaders
Authors:
R. U. Abbasi,
T. Abu-Zayyad,
M. Allen,
E. Barcikowski,
J. W. Belz,
D. R. Bergman,
S. A. Blake,
M. Byrne,
R. Cady,
B. G. Cheon,
J. Chiba,
M. Chikawa,
T. Fujii,
M. Fukushima,
G. Furlich,
T. Goto,
W. Hanlon,
Y. Hayashi,
N. Hayashida,
K. Hibino,
K. Honda,
D. Ikeda,
N. Inoue,
T. Ishii,
H. Ito
, et al. (99 additional authors not shown)
Abstract:
Bursts of gamma ray showers have been observed in coincidence with downward propagating negative leaders in lightning flashes by the Telescope Array Surface Detector (TASD). The TASD is a 700~square kilometer cosmic ray observatory located in southwestern Utah, U.S.A. In data collected between 2014 and 2016, correlated observations showing the structure and temporal development of three shower-pro…
▽ More
Bursts of gamma ray showers have been observed in coincidence with downward propagating negative leaders in lightning flashes by the Telescope Array Surface Detector (TASD). The TASD is a 700~square kilometer cosmic ray observatory located in southwestern Utah, U.S.A. In data collected between 2014 and 2016, correlated observations showing the structure and temporal development of three shower-producing flashes were obtained with a 3D lightning map** array, and electric field change measurements were obtained for an additional seven flashes, in both cases co-located with the TASD. National Lightning Detection Network (NLDN) information was also used throughout. The showers arrived in a sequence of 2--5 short-duration ($\le$10~$μ$s) bursts over time intervals of several hundred microseconds, and originated at an altitude of $\simeq$3--5 kilometers above ground level during the first 1--2 ms of downward negative leader breakdown at the beginning of cloud-to-ground lightning flashes. The shower footprints, associated waveforms and the effect of atmospheric propagation indicate that the showers consist primarily of downward-beamed gamma radiation. This has been supported by GEANT simulation studies, which indicate primary source fluxes of $\simeq$$10^{12}$--$10^{14}$ photons for $16^{\circ}$ half-angle beams. We conclude that the showers are terrestrial gamma-ray flashes (TGFs), similar to those observed by satellites, but that the ground-based observations are more representative of the temporal source activity and are also more sensitive than satellite observations, which detect only the most powerful TGFs.
△ Less
Submitted 18 May, 2018; v1 submitted 17 May, 2017;
originally announced May 2017.
-
Fields of View for Environmental Radioactivity
Authors:
Alex Malins,
Masahiko Okumura,
Masahiko Machida,
Hiroshi Takemiya,
Kimiaki Saito
Abstract:
The gamma component of air radiation dose rates is a function of the amount and spread of radioactive nuclides in the environment. These radionuclides can be natural or anthropogenic in origin. The field of view describes the area of radionuclides on, or below, the ground that is responsible for determining the air dose rate, and hence correspondingly the external radiation exposure. This work des…
▽ More
The gamma component of air radiation dose rates is a function of the amount and spread of radioactive nuclides in the environment. These radionuclides can be natural or anthropogenic in origin. The field of view describes the area of radionuclides on, or below, the ground that is responsible for determining the air dose rate, and hence correspondingly the external radiation exposure. This work describes Monte Carlo radiation transport calculations for the field of view under a variety of situations. Presented first are results for natural 40K and thorium and uranium series radionuclides distributed homogeneously within the ground. Results are then described for atmospheric radioactive caesium fallout, such as from the Fukushima Daiichi Nuclear Power Plant accident. Various stages of fallout evolution are considered through the depth distribution of 134Cs and 137Cs in soil. The fields of view for the natural radionuclides and radiocaesium are different. This can affect the responses of radiation monitors to these nuclides if the detector is partially shielded from the ground within its field of view. The field of view also sets the maximum reduction in air dose rates that can be achieved through local decontamination or remediation measures. This maximum efficiency can be determined quickly from the data presented here for the air dose rate versus the spatial extent of radioactive source on the ground.
△ Less
Submitted 2 November, 2015; v1 submitted 30 September, 2015;
originally announced September 2015.
-
Topographic Effects on Ambient Dose Equivalent Rates from Radiocesium Fallout
Authors:
Alex Malins,
Masahiko Okumura,
Masahiko Machida,
Kimiaki Saito
Abstract:
Land topography can affect air radiation dose rates by locating radiation sources closer to, or further from, detector locations when compared to perfectly flat terrain. Hills and slopes can also shield against the propagation of gamma rays. To understand the possible magnitude of topographic effects on air dose rates, this study presents calculations for ambient dose equivalent rates at a range o…
▽ More
Land topography can affect air radiation dose rates by locating radiation sources closer to, or further from, detector locations when compared to perfectly flat terrain. Hills and slopes can also shield against the propagation of gamma rays. To understand the possible magnitude of topographic effects on air dose rates, this study presents calculations for ambient dose equivalent rates at a range of heights above the ground for varying land topographies. The geometries considered were angled ground at the intersection of two planar surfaces, which is a model for slopes neighboring flat land, and a simple conical geometry, representing settings from hilltops to valley bottoms. In each case the radiation source was radioactive cesium fallout, and the slope angle was varied systematically to determine the effect of topography on the air dose rate. Under the assumption of homogeneous fallout across the land surface, and for these geometries and detector locations, the dose rates at high altitudes are more strongly affected by the underlying land topography than those close to ground level. At a height of 300m, uneven topographies can lead to a 50% change in air dose rates compared to if the ground were uniformly flat. However, in practice the effect will more often than not be smaller than this, and heterogeneity in the source distribution is likely to be a more significant factor in determining local air dose rates.
△ Less
Submitted 15 April, 2015; v1 submitted 13 February, 2015;
originally announced February 2015.
-
Comment on `Update of 40K and 226Ra and 232Th series $γ$-to-dose conversion factors for soil'
Authors:
Alex Malins,
Masahiko Machida,
Kimiaki Saito
Abstract:
A letter to the editor of the Journal of Environmental Radioactivity on the article: E. Gasser, A. Nachab, A. Nourreddine, Ch. Roy, and A. Sellam, `Update of 40K and 226Ra and 232Th series $γ$-to-dose conversion factors for soil', J. Environ. Radioactiv. 138, 68-71 (2014), DOI: 10.1016/j.jenvrad.2014.08.002.
A letter to the editor of the Journal of Environmental Radioactivity on the article: E. Gasser, A. Nachab, A. Nourreddine, Ch. Roy, and A. Sellam, `Update of 40K and 226Ra and 232Th series $γ$-to-dose conversion factors for soil', J. Environ. Radioactiv. 138, 68-71 (2014), DOI: 10.1016/j.jenvrad.2014.08.002.
△ Less
Submitted 19 January, 2015; v1 submitted 19 January, 2015;
originally announced January 2015.
-
The Rise of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities
Authors:
P. Kneisel,
G. Ciovati,
P. Dhakal,
K. Saito,
W. Singer,
X. Singer,
G. R. Myneni
Abstract:
As a result of a collaboration between Jefferson Lab and niobium manufacturer CBMM, ingot niobium was explored as a possible material for superconducting radiofrequency (SRF) cavity fabrication. The first single cell cavity from large grain high purity niobium was fabricated and successfully tested at Jefferson Lab in 2004. This pioneering work triggered research activities in other SRF laboratori…
▽ More
As a result of a collaboration between Jefferson Lab and niobium manufacturer CBMM, ingot niobium was explored as a possible material for superconducting radiofrequency (SRF) cavity fabrication. The first single cell cavity from large grain high purity niobium was fabricated and successfully tested at Jefferson Lab in 2004. This pioneering work triggered research activities in other SRF laboratories around the world. Large grain niobium became not only an interesting alternative material for cavity builders, but also material scientists and surface scientists were eager to participate in the development of this material. Most of the original expectations for this material of being less costly and allowing less expensive fabrication and treatment procedures at the same performance levels in cavities have been met. Many single cell cavities made from material of different suppliers have been tested successfully and several multi-cell cavities have shown the performances comparable to the best cavities made from standard poly-crystalline niobium. Several 9-cell cavities fabricated by Research Instruments and tested at DESY exceeded the best performing fine grain cavities with a record accelerating gradient of Eacc = 45.6 MV/m. Recently- at JLab- by using a new furnace treatment procedure a single cell cavity made of ingot niobium performed at a remarkably high Q0-value (~5x10^10) at an accelerating gradient of ~20 MV/m, at 2K. Such performance levels push the state-of-the art of SRF technology to new limits and are of great interest for future accelerators. This contribution reviews the development of ingot niobium technology and attempts to make a case for this material being the choice for future accelerators.
△ Less
Submitted 5 April, 2013;
originally announced April 2013.
-
Two types of well followed users in the followership networks of Twitter
Authors:
Kodai Saito,
Naoki Masuda
Abstract:
In the Twitter blogosphere, the number of followers is probably the most basic and succinct quantity for measuring popularity of users. However, the number of followers can be manipulated in various ways; we can even buy follows. Therefore, alternative popularity measures for Twitter users on the basis of, for example, users' tweets and retweets, have been developed. In the present work, we take a…
▽ More
In the Twitter blogosphere, the number of followers is probably the most basic and succinct quantity for measuring popularity of users. However, the number of followers can be manipulated in various ways; we can even buy follows. Therefore, alternative popularity measures for Twitter users on the basis of, for example, users' tweets and retweets, have been developed. In the present work, we take a purely network approach to this fundamental question. First, we find that two relatively distinct types of users possessing a large number of followers exist, in particular for Japanese, Russian, and Korean users among the seven language groups that we examined. A first type of user follows a small number of other users. A second type of user follows approximately the same number of other users as the number of follows that the user receives. Then, we compare local (i.e., egocentric) followership networks around the two types of users with many followers. We show that the second type, which is presumably uninfluential users despite its large number of followers, is characterized by high link reciprocity, a large number of friends (i.e., those whom a user follows) for the followers, followers' high link reciprocity, large clustering coefficient, large fraction of the second type of users among the followers, and a small PageRank. Our network-based results support that the number of followers used alone is a misleading measure of user's popularity. We propose that the number of friends, which is simple to measure, also helps us to assess the popularity of Twitter users.
△ Less
Submitted 15 January, 2014; v1 submitted 4 February, 2013;
originally announced February 2013.
-
Learning Asynchronous-Time Information Diffusion Models and its Application to Behavioral Data Analysis over Social Networks
Authors:
Kazumi Saito,
Masahiro Kimura,
Kouzou Ohara,
Hiroshi Motoda
Abstract:
One of the interesting and important problems of information diffusion over a large social network is to identify an appropriate model from a limited amount of diffusion information. There are two contrasting approaches to model information diffusion: a push type model known as Independent Cascade (IC) model and a pull type model known as Linear Threshold (LT) model. We extend these two models (ca…
▽ More
One of the interesting and important problems of information diffusion over a large social network is to identify an appropriate model from a limited amount of diffusion information. There are two contrasting approaches to model information diffusion: a push type model known as Independent Cascade (IC) model and a pull type model known as Linear Threshold (LT) model. We extend these two models (called AsIC and AsLT in this paper) to incorporate asynchronous time delay and investigate 1) how they differ from or similar to each other in terms of information diffusion, 2) whether the model itself is learnable or not from the observed information diffusion data, and 3) which model is more appropriate to explain for a particular topic (information) to diffuse/propagate. We first show there can be variations with respect to how the time delay is modeled, and derive the likelihood of the observed data being generated for each model. Using one particular time delay model, we show the model parameters are learnable from a limited amount of observation. We then propose a method based on predictive accuracy by which to select a model which better explains the observed data. Extensive evaluations were performed. We first show using synthetic data with the network structures taken from real networks that there are considerable behavioral differences between the AsIC and the AsLT models, the proposed methods accurately and stably learn the model parameters, and identify the correct diffusion model from a limited amount of observation data. We next apply these methods to behavioral analysis of topic propagation using the real blog propagation data, and show there is a clear indication as to which topic better follows which model although the results are rather insensitive to the model selected at the level of discussing how far and fast each topic propagates from the learned parameter values.
△ Less
Submitted 20 April, 2012;
originally announced April 2012.
-
Neutron energy spectrum from 120 GeV protons on a thick copper target
Authors:
Nobuhiro Shigyo,
Toshiya Sanami,
Tsuyoshi Kajimoto,
Yosuke Iwamoto,
Masayuki Hagiwara,
Kiwamu Saito,
Kenji Ishibashi,
Hiroshi Nakashima,
Yukio Sakamoto,
Hee-Seock Lee,
Erik Ramberg,
Aria A. Meyhoefer,
Rick Coleman,
Doug Jensen,
Anthony F. Leveling,
David J. Boehnlein,
Nikolai V. Mokhov
Abstract:
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in theoretical simulation codes. It also helps exploring the reasons for some disagreement between calculation results and shielding benchmark data taken at high e…
▽ More
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in theoretical simulation codes. It also helps exploring the reasons for some disagreement between calculation results and shielding benchmark data taken at high energy accelerator facilities, since it is evaluated separately from neutron transport. The experiment was carried out using a 120 GeV proton beam of 3E5 protons/spill. Since the spill duration was 4 seconds, proton-induced events were counted pulse by pulse. The intensity was maintained using diffusers and collimators installed in the beam line to MTBF. The protons hit a copper block target the size of which is 5cm x 5cm x 60 cm long. The neutrons produced in the target were measured using NE213 liquid scintillator detectors, placed about 5.5 m away from the target at 30^{\circ} and 5 m 90^{\circ} with respect to the proton beam axis. The neutron energy was determined by time-of-flight technique using timing difference between the NE213 and a plastic scintillator located just before the target. Neutron detection efficiency of NE213 was determined on basis of experimental data from the high energy neutron beam line at Los Alamos National Laboratory. The neutron spectrum was compared with the results of multi-particle transport codes to validate the implemented theoretical models. The apparatus would be applied to future measurements to obtain a systematic data set for secondary particle production on various target materials.
△ Less
Submitted 7 February, 2012;
originally announced February 2012.
-
Efficient Detection of Hot Span in Information Diffusion from Observation
Authors:
Kouzou Ohara,
Kazumi Saito,
Masahiro Kimura,
Hiroshi Motoda
Abstract:
We addressed the problem of detecting the change in behavior of information diffusion from a small amount of observation data, where the behavior changes were assumed to be effectively reflected in changes in the diffusion parameter value. The problem is to detect where in time and how long this change persisted and how big this change is. We solved this problem by searching the change pattern tha…
▽ More
We addressed the problem of detecting the change in behavior of information diffusion from a small amount of observation data, where the behavior changes were assumed to be effectively reflected in changes in the diffusion parameter value. The problem is to detect where in time and how long this change persisted and how big this change is. We solved this problem by searching the change pattern that maximizes the likelihood of generating the observed diffusion sequences. The naive learning algorithm has to iteratively update the patten boundaries, each requiring optimization of diffusion parameters by the EM algorithm, and is very inefficient. We devised a very efficient search algorithm using the derivative of likelihood which avoids parameter value optimization during the search. The results tested using three real world network structures confirmed that the algorithm can efficiently identify the correct change pattern. We further compared our algorithm with the naive method that finds the best combination of change boundaries by an exhaustive search through a set of randomly selected boundary candidates, and showed that the proposed algorithm far outperforms the native method both in terms of accuracy and computation time.
△ Less
Submitted 12 October, 2011;
originally announced October 2011.
-
Compensation of the Crossing Angle with Crab Cavities at KEKB
Authors:
T. Abe,
K. Akai,
M. Akemoto,
A. Akiyama,
M. Arinaga,
K. Ebihara,
K. Egawa,
A. Enomoto,
J. Flanagan,
S. Fukuda,
H. Fukuma,
Y. Funakoshi,
K. Furukawa,
T. Furuya,
K. Hara,
T. Higo,
S. Hiramatsu,
H. Hisamatsu,
H. Honma,
T. Honma,
K. Hosoyama,
T. Ieiri,
N. Iida,
H. Ikeda,
M. Ikeda
, et al. (90 additional authors not shown)
Abstract:
Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than…
▽ More
Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than the geometrical gain has been achieved, further study is necessary and under way to reach the prediction of simulation.
△ Less
Submitted 21 June, 2007;
originally announced June 2007.
-
Achievement of 35 MV/m in the Superconducting Nine-Cell Cavities for TESLA
Authors:
L. Lilje,
E. Kako,
D. Kostin,
A. Matheisen,
W. -D. Moeller,
D. Proch,
D. Reschke,
K. Saito,
P. Schmueser,
S. Simrock,
T. Suzuki,
K. Twarowski
Abstract:
The Tera Electronvolt Superconducting Linear Accelerator TESLA is the only linear electron-positron collider project based on superconductor technology for particle acceleration. In the first stage with 500 GeV center-of-mass energy an accelerating field of 23.4 MV/m is needed in the superconducting niobium cavities which are operated at a temperature of 2 K and a quality factor Q0 of 10 to the…
▽ More
The Tera Electronvolt Superconducting Linear Accelerator TESLA is the only linear electron-positron collider project based on superconductor technology for particle acceleration. In the first stage with 500 GeV center-of-mass energy an accelerating field of 23.4 MV/m is needed in the superconducting niobium cavities which are operated at a temperature of 2 K and a quality factor Q0 of 10 to the 10. This performance has been reliably achieved in the cavities of the TESLA Test Facility (TTF) accelerator. The upgrade of TESLA to 800 GeV requires accelerating gradients of 35 MV/m. Using an improved cavity treatment by electrolytic polishing it has been possible to raise the gradient to 35 - 43 MV/m in single cell resonators. Here we report on the successful transfer of the electropolishing technique to multi-cell cavities. Presently four nine-cell cavities have achieved 35 MV/m, and a fifth cavity could be excited to 39 MV/m. In two high-power tests it could be verified that EP-cavities preserve their excellent performance after welding into the helium cryostat and assembly of the high-power coupler. One cavity has been operated for 1100 hours at the TESLA-800 gradient of 35 MV/m and 57 hours at 36 MV/m without loss in performance.
△ Less
Submitted 23 February, 2004; v1 submitted 27 January, 2004;
originally announced January 2004.
-
Effect of different choices of the Boltzmannized flux operator on thermal exchange and recombination reactions
Authors:
Koichi Saito
Abstract:
The rate constants for recombination and exchange reactions are calculated using the flux correlation approach with a general form of the Boltzmannized flux operator, which can simultaneously describe the Kubo and traditional half-split forms. First, we consider an exactly solvable model, i.e., the free particle case, in terms of a new scaling function. Next, as a non-trivial case, we study the…
▽ More
The rate constants for recombination and exchange reactions are calculated using the flux correlation approach with a general form of the Boltzmannized flux operator, which can simultaneously describe the Kubo and traditional half-split forms. First, we consider an exactly solvable model, i.e., the free particle case, in terms of a new scaling function. Next, as a non-trivial case, we study the recombination and exchange reactions at very high pressure. Since the rate constant is calculated by Laplace transform of the flux correlation function, the result depends on how the Boltzmannized flux operator is chosen. We find that a choice of the flux operator affects the rate constant considerably. For the recombination reaction, the ratio of the rate constant in the half-split form to that in the Kubo form approaches zero in the high pressure limit.
△ Less
Submitted 23 April, 2003;
originally announced April 2003.
-
Flux Correlation Approach to Thermal Reactions and Recombination Rate
Authors:
Koichi Saito
Abstract:
The rate constants for recombination and exchange processes are studied in terms of two different flux correlation approaches: one is the Yamamoto approach, which is based on the linear response theory, and the other is the Miller one. Using those approaches we consider two exactly solvable cases, i.e., the free particle and the parabolic potential models. Since the rate constants for recombinat…
▽ More
The rate constants for recombination and exchange processes are studied in terms of two different flux correlation approaches: one is the Yamamoto approach, which is based on the linear response theory, and the other is the Miller one. Using those approaches we consider two exactly solvable cases, i.e., the free particle and the parabolic potential models. Since the rate constants for recombination and exchange processes are calculated by Laplace transforms of the flux correlation functions, the two approaches give different results. In the present calculation, we find that the rate constant in the Yamamoto approach is larger than that in the Miller approach by about 40% at low temperature ($\sim 100$ K) and high pressure ($\sim 1$ GPa). The difference is considerable in the region where quantum effects dominate.
△ Less
Submitted 8 November, 2002;
originally announced November 2002.
-
Development of Superconducting Linac for the Kek/Jaeri Joint Project
Authors:
M. Mizumoto,
N. Ouchi,
J. Kusano,
E. Chishiro,
K. Hasegawa,
N. Akaoka,
K. Saito,
S. Noguchi,
E. Kako,
H. Inoue,
T. Shishido,
M. Ono,
K. Mukugi,
C. Tsukishima,
O. Takeda,
M. Matsuoka
Abstract:
The JAERI/KEK Joint Project for the high-intensity proton accelerator facility has been proposed with a superconducting (SC) linac option from 400 MeV to 600MeV. System design of the SC linac has been carried out based on the equipartitioning concept. The SC linac is planned to use as an injector to a 3GeV rapid cycling synchrotron (RCS) for spallation neutron source after it meets requirement t…
▽ More
The JAERI/KEK Joint Project for the high-intensity proton accelerator facility has been proposed with a superconducting (SC) linac option from 400 MeV to 600MeV. System design of the SC linac has been carried out based on the equipartitioning concept. The SC linac is planned to use as an injector to a 3GeV rapid cycling synchrotron (RCS) for spallation neutron source after it meets requirement to momentum spread less than +-0.1%. In the R&D work for SC cavities, vertical tests of single-cell and 5 cell cavities were performed. Experiments on multi-cell (5 cell) cavities of b=0.50 and b=0.89 at 2K were carried out with values of maximum electric surface peak fields of 23MV/m and 31MV/m, respectively. A model describing dynamic Lorentz detuning for SC cavities has been developed for pulse mode operation. Validity of the model was confirmed experimentally to simulate the performance.
△ Less
Submitted 19 August, 2000;
originally announced August 2000.