Showing 1–25 of 25 results for author: Saha, P

Wafer-Scale Integration of Freestanding Photonic Devices with Color Centers in Silicon Carbide

Authors: Sridhar Majety, Victoria A. Norman, Pranta Saha, Alex H. Rubin, Scott Dhuey, Marina Radulaski

Abstract: Color center platforms have been at the forefront of quantum nanophotonics for applications in quantum networking, computing, and sensing. However, large-scale deployment of this technology has been stifled by a lack of ability to integrate photonic devices at scale while maintaining the properties of quantum emitters. We address this challenge in silicon carbide which has both commercially availa… ▽ More Color center platforms have been at the forefront of quantum nanophotonics for applications in quantum networking, computing, and sensing. However, large-scale deployment of this technology has been stifled by a lack of ability to integrate photonic devices at scale while maintaining the properties of quantum emitters. We address this challenge in silicon carbide which has both commercially available wafer-scale substrates and is a host to color centers with desirable optical and spin properties. Using ion beam etching at an angle, we develop a 5-inch wafer process for the fabrication of triangular cross-section photonic devices in bulk 4H-SiC. The developed process has a variability in etch rate and etch angle of 5.4% and 2.9%, respectively. Furthermore, the integrated color centers maintain their optical properties after the etch, thus achieving the nanofabrication goal of wafer-scale nanofabrication in quantum-grade silicon carbide. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Interference with (Pseudo) Thermal Light; The Hanbury Brown and Twiss Effect

Authors: Km Nitu Rai, Soumen Basak, Subrata Sarangi, Prasenjit Saha

Abstract: The correlation of light from two sources leads to an interference pattern if they belong to a specific time interval known as the coherence time, denoted as $Δτ$. The relationship governing this phenomenon is $ΔτΔν\approx 1$, where $Δν$ represents the bandwidth of the light. This requirement is not satisfied, and hence, interference fringes are not observable in the case of ordinary (thermal) lig… ▽ More The correlation of light from two sources leads to an interference pattern if they belong to a specific time interval known as the coherence time, denoted as $Δτ$. The relationship governing this phenomenon is $ΔτΔν\approx 1$, where $Δν$ represents the bandwidth of the light. This requirement is not satisfied, and hence, interference fringes are not observable in the case of ordinary (thermal) light. In the 1950s, Robert Hanbury Brown and Richard Q. Twiss explored interference phenomena using a narrow bandwidth of thermal light. This investigation led to the discovery of the Hanbury-Brown and Twiss effect (or the HBT effect in short), which has since found applications in various fields, particularly stellar observations and quantum optics. This article briefly traces the history of the HBT effect and its applications in various fields, including stellar observations. More importantly, it outlines the basic theoretical framework of this effect, followed by the design and results of the correlation in intensity fluctuation of a pseudo-thermal light in a college laboratory setting (Michelson interferometer). △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: Submitted to Resonance

First (calibration) experiment using proton beam from FRENA at SINP

Authors: C. Basu, K. Banerjee, T. K. Ghosh, G. Mukherjee, C. Bhattacharya, Shraddha S Desai, R. Shil, A. K. Saha, J. K. Meena, T. Bar, D. Basak, L. K. Sahoo, S. Saha, C. Marick, D. Das, D. Das, D. Das, M. Kujur, S. Roy, S. S. Basu, U. Gond, A. Saha, A. Das, M. Samanta, P. Saha , et al. (1 additional authors not shown)

Abstract: This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift. This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift. △ Less

Submitted 24 January, 2024; originally announced February 2024.

ICECAP: a 3-in-1 integrated cryogenic system for emission, collection and photon-detection from near infrared quantum nanophotonic devices

Authors: Victoria A. Norman, Sridhar Majety, Alex H. Rubin, Pranta Saha, Jeanette Simo, Bradi Palomarez, Liang Li, Pietra B. Curro, Scott Dhuey, Selven Virasawmy, Marina Radulaski

Abstract: Deployment of quantum telecommunication technologies requires single-photon light emission, collection and detection capability at each network node in cryogenic environments. We combine recent technological advancements in single-photon detectors and cryogenics to demonstrate a 3-in-1 system that incorporates superconducting nanowire single-photon detectors into an optical cryostat operating at t… ▽ More Deployment of quantum telecommunication technologies requires single-photon light emission, collection and detection capability at each network node in cryogenic environments. We combine recent technological advancements in single-photon detectors and cryogenics to demonstrate a 3-in-1 system that incorporates superconducting nanowire single-photon detectors into an optical cryostat operating at temperatures below 2 K. Dubbed the ICECAP system, this cryostation cools samples, collects emission, and detects single photons in one efficient environment suitable for a variety of near infrared quantum emitters. We utilize this system to characterize emission from silicon carbide color centers in photoluminescence and time-resolved measurements. Moreover, we demonstrate the first optical characterization of nitrogen-vacancy centers integrated in 4H-SiC nanopillars. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Dynamic Instability of Follower Forced Euler Bernoulli Cantilever Beam With Tip Mass

Authors: Premjit Saha, Tarunraj Singh

Abstract: This work focuses on the stability analysis of an Euler Bernoulli cantilever beam with a tip mass at the free end, subject to a follower force. This can serve as a viable model for analysis of elastic instability occurring due to fluid-structure interaction of structural components submerged in fluids and gases. A linear model with appropriate boundary conditions is developed using the energy form… ▽ More This work focuses on the stability analysis of an Euler Bernoulli cantilever beam with a tip mass at the free end, subject to a follower force. This can serve as a viable model for analysis of elastic instability occurring due to fluid-structure interaction of structural components submerged in fluids and gases. A linear model with appropriate boundary conditions is developed using the energy formulation. The characteristic equation of the linear model establishes the relationship between the pulsation of the beam and the magnitude of applied follower force. The evolution of temporal eigenvalues with respect to the magnitude of the follower force helps in evaluation of the critical follower forces responsible for different modes of instability. The presented model demonstrates the existence of only dynamic instability in the system. Furthermore, the model predicts that both types of the dynamic instability i.e., flutter and divergence, are possible in the system. △ Less

Submitted 16 November, 2023; originally announced November 2023.

Triangular Cross-Section Beam Splitters in Silicon Carbide for Quantum Information Processing

Authors: Sridhar Majety, Pranta Saha, Zbynka Kekula, Scott Dhuey, Marina Radulaski

Abstract: Triangular cross-section color center photonics in silicon carbide is a leading candidate for scalable implementation of quantum hardware. Within this geometry, we model low-loss beam splitters for applications in key quantum optical operations such as entanglement and single-photon interferometry. We consider triangular cross-section single-mode waveguides for the design of a directional coupler.… ▽ More Triangular cross-section color center photonics in silicon carbide is a leading candidate for scalable implementation of quantum hardware. Within this geometry, we model low-loss beam splitters for applications in key quantum optical operations such as entanglement and single-photon interferometry. We consider triangular cross-section single-mode waveguides for the design of a directional coupler. We optimize parameters for a 50:50 beam splitter. Finally, we test the experimental feasibility of the designs by fabricating triangular waveguides in an ion beam etching process and identify suitable designs for short-term implementation. △ Less

Submitted 13 April, 2024; v1 submitted 13 November, 2023; originally announced November 2023.

Quasi-deterministic Localization of Er Emitters in Thin Film TiO$_2$ through Submicron-scale Crystalline Phase Control

Authors: Sean E. Sullivan, Jonghoon Ahn, Tao Zhou, Preetha Saha, Martin V. Holt, Supratik Guha, F. J. Heremans, Manish Kumar Singh

Abstract: With their shielded 4f orbitals, rare-earth ions (REIs) offer optical and electron spin transitions with good coherence properties even when embedded in a host crystal matrix, highlighting their utility as promising quantum emitters and memories for quantum information processing. Among REIs, trivalent erbium (Er$^{3+}$) uniquely has an optical transition in the telecom C-band, ideal for transmiss… ▽ More With their shielded 4f orbitals, rare-earth ions (REIs) offer optical and electron spin transitions with good coherence properties even when embedded in a host crystal matrix, highlighting their utility as promising quantum emitters and memories for quantum information processing. Among REIs, trivalent erbium (Er$^{3+}$) uniquely has an optical transition in the telecom C-band, ideal for transmission over optical fibers, and making it well-suited for applications in quantum communication. The deployment of Er$^{3+}$ emitters into a thin film TiO$_2$ platform has been a promising step towards scalable integration; however, like many solid-state systems, the deterministic spatial placement of quantum emitters remains an open challenge. We investigate laser annealing as a means to locally tune the optical resonance of Er$^{3+}$ emitters in TiO$_2$ thin films on Si. Using both nanoscale X-ray diffraction measurements and cryogenic photoluminescence spectroscopy, we show that tightly focused below-gap laser annealing can induce anatase to rutile phase transitions in a nearly diffraction-limited area of the films and improve local crystallinity through grain growth. As a percentage of the Er:TiO$_2$ is converted to rutile, the Er$^{3+}$ optical transition blueshifts by 13 nm. We explore the effects of changing laser annealing time and show that the amount of optically active Er:rutile increases linearly with laser power. We additionally demonstrate local phase conversion on microfabricated Si structures, which holds significance for quantum photonics. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Comments: 7 pages, 4 figures

Triangular Quantum Photonic Devices with Integrated Detectors in Silicon Carbide

Authors: Sridhar Majety, Stefan Strohauer, Pranta Saha, Fabian Wietschorke, Jonathan J. Finley, Kai Müller, Marina Radulaski

Abstract: Triangular cross-section SiC photonic devices have been studied as an efficient and scalable route for integration of color centers into quantum hardware. In this work, we explore efficient collection and detection of color center emission in a triangular cross-section SiC waveguide by introducing a photonic crystal mirror on its one side and a superconducting nanowire single photon detector (SNSP… ▽ More Triangular cross-section SiC photonic devices have been studied as an efficient and scalable route for integration of color centers into quantum hardware. In this work, we explore efficient collection and detection of color center emission in a triangular cross-section SiC waveguide by introducing a photonic crystal mirror on its one side and a superconducting nanowire single photon detector (SNSPD) on the other. Our modeled triangular cross-section devices with a randomly positioned emitter have a maximum coupling efficiency of 89 % into the desired optical mode and a high coupling efficiency (> 75 %) in more than half of the configurations. For the first time, NbTiN thin films were sputtered on 4H-SiC and the electrical and optical properties of the thin films were measured. We found that the transport properties are similar to the case of NbTiN on SiO2 substrates, while the extinction coefficient is up to 50 % higher for 1680 nm wavelength. Finally, we performed Finite-Difference Time-Domain simulations of triangular cross-section waveguide integrated with an SNSPD to identify optimal nanowire geometries for efficient detection of light from TE and TM polarized modes. △ Less

Submitted 23 December, 2022; v1 submitted 10 August, 2022; originally announced August 2022.

Comments: 31 pages, 8 figures

Utilizing photonic band gap in triangular silicon carbide structures for efficient quantum nanophotonic hardware

Authors: Pranta Saha, Sridhar Majety, Marina Radulaski

Abstract: Silicon carbide is among the leading quantum information material platforms due to the long spin coherence and single-photon emitting properties of its color center defects. Applications of silicon carbide in quantum networking, computing, and sensing rely on the efficient collection of color center emission into a single optical mode. Recent hardware development in this platform has focused on an… ▽ More Silicon carbide is among the leading quantum information material platforms due to the long spin coherence and single-photon emitting properties of its color center defects. Applications of silicon carbide in quantum networking, computing, and sensing rely on the efficient collection of color center emission into a single optical mode. Recent hardware development in this platform has focused on angle-etching processes that preserve emitter properties and produce triangularly shaped devices. However, little is known about the light propagation in this geometry. We explore the formation of photonic band gap in structures with a triangular cross-section, which can be used as a guiding principle in develo** efficient quantum nanophotonic hardware in silicon carbide. Furthermore, we propose applications in three areas: the TE-pass filter, the TM-pass filter, and the highly reflective photonic crystal mirror, which can be utilized for efficient collection and propagating mode selection of light emission. △ Less

Submitted 4 January, 2023; v1 submitted 5 August, 2022; originally announced August 2022.

Quantum Information Processing With Integrated Silicon Carbide Photonics

Authors: Sridhar Majety, Pranta Saha, Victoria A. Norman, Marina Radulaski

Abstract: Color centers in wide band gap semiconductors are prominent candidates for solid-state quantum technologies due to their attractive properties including optical interfacing, long coherence times, spin-photon and spin-spin entanglement, as well as the potential for scalability. Silicon carbide color centers integrated into photonic devices span a wide range of applications in quantum information pr… ▽ More Color centers in wide band gap semiconductors are prominent candidates for solid-state quantum technologies due to their attractive properties including optical interfacing, long coherence times, spin-photon and spin-spin entanglement, as well as the potential for scalability. Silicon carbide color centers integrated into photonic devices span a wide range of applications in quantum information processing, in a material platform with quantum-grade wafer availability and advanced processing capabilities. Recent progress in emitter generation and characterization, nanofabrication, device design, and quantum optical studies have amplified the scientific interest in this platform. We provide a conceptual and quantitative analysis of the role of silicon carbide integrated photonics in three key application areas: quantum networking, simulation, and computing. △ Less

Submitted 12 March, 2022; v1 submitted 29 October, 2021; originally announced November 2021.

Photoemission characterization of N-polar III-Nitride photocathodes as bright electron beam source for accelerator applications

Authors: L. Cultrera, E. Rocco, F. Shahedipour-Sandvik, L. D. Bell, J. K. Bae, I. V. Bazarov, P. Saha, S. Karkare, A. Arjunan

Abstract: We report on the growth and characterization of a new class of photocathode structures for application as electron sources to produce high brightness electron beams for accelerator applications. The sources are realized using III-Nitride materials and are designed to leverage the strong polarization field characteristic of this class material while grown in their wurtzite crystal structure to prod… ▽ More We report on the growth and characterization of a new class of photocathode structures for application as electron sources to produce high brightness electron beams for accelerator applications. The sources are realized using III-Nitride materials and are designed to leverage the strong polarization field characteristic of this class material while grown in their wurtzite crystal structure to produce a negative electron affinity condition without the use of Cs, possibly allowing these materials to be operated in RF gun. A Quantum Efficiency (QE) of about 1x10$^{-3}$ and a Mean Transverse Energy (MTE) of electron of about 100 meV are measured at the operating wavelength of 265 nm. In a vacuum level of 3x10$^{-10}$ Torr the QE does not decrease after more than 24 hours of continuous operation. The lowest MTE, about 50 meV, is measured at 300 nm where the measured QE is 1.5x10$^{-5}$. Surface characterizations reveal possible contribution to the MTE due to the surface morphology calling for more detailed studies. △ Less

Submitted 4 October, 2021; originally announced October 2021.

Comments: will be submitted to Journal of Applied Physics

Thermal conductivity of iron and nickel during melting: Implication to Planetary liquid outer core

Authors: Pinku Saha, Goutam Dev Mukherjee

Abstract: We report the measurements of the thermal conductivity ($κ$) of iron (Fe) and nickel (Ni) at high pressures and high temperatures. $κ$ values are estimated from the temperature measurements across the sample surface in a laser heated diamond anvil cell (LHDAC) and using the COMSOL software. Near-isothermal $κ$'s are observed to increase with pressure in both the metals due to the increase of densi… ▽ More We report the measurements of the thermal conductivity ($κ$) of iron (Fe) and nickel (Ni) at high pressures and high temperatures. $κ$ values are estimated from the temperature measurements across the sample surface in a laser heated diamond anvil cell (LHDAC) and using the COMSOL software. Near-isothermal $κ$'s are observed to increase with pressure in both the metals due to the increase of density of the pressed metals. In both metals $κ$'s are observed to follow a sharp fall during melting at different pressure points and are consistence with the other multi-anvil measurements. Constant values of $κ$ in these metals during melting at different pressures reveal the loss of long range order, which creates independent movement of atomic metals. The melting temperature measured in these metals from the sudden drop of $κ$-values are in a good agreement with the other melting measurements in LHDAC. The results obtained in this study is expected to provide an insight to the studies on the planets Mercury and Mars and their interior. △ Less

Submitted 19 May, 2021; originally announced May 2021.

Study of energy response and resolution of the ATLAS Tile Calorimeter to hadrons of energies from 16 to 30 GeV

Authors: Jalal Abdallah, Stylianos Angelidakis, Giorgi Arabidze, Nikolay Atanov, Johannes Bernhard, Romeo Bonnefoy, Jonathan Bossio, Ryan Bouabid, Fernando Carrio, Tomas Davidek, Michal Dubovsky, Luca Fiorini, Francisco Brandan Garcia Aparisi, Tancredi Carli, Alexander Gerbershagen, Hazal Goksu, Haleh Hadavand, Siarhei Harkusha, Dingane Hlaluku, Michael James Hibbard, Kevin Hildebrand, Juansher Jejelava, Andrey Kamenshchikov, Stergios Kazakos, Tomas Kello , et al. (46 additional authors not shown)

Abstract: Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The measurements of the energy response and resolution of the detector to positive pions and kaons and protons with energy in the range 16 to 30 GeV are reported. The results have uncertainties of few percent. They were compared to the predictions of the Geant… ▽ More Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The measurements of the energy response and resolution of the detector to positive pions and kaons and protons with energy in the range 16 to 30 GeV are reported. The results have uncertainties of few percent. They were compared to the predictions of the Geant4-based simulation program used in ATLAS to estimate the response of the detector to proton-proton events at Large Hadron Collider. The determinations obtained using experimental and simulated data agree within the uncertainties. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Quantum photonics in triangular-cross-section nanodevices in silicon carbide

Authors: Sridhar Majety, Victoria A. Norman, Liang Li, Miranda Bell, Pranta Saha, Marina Radulaski

Abstract: Silicon carbide is evolving as a prominent solid-state platform for the realization of quantum information processing hardware. Angle-etched nanodevices are emerging as a solution to photonic integration in bulk substrates where color centers are best defined. We model triangular cross-section waveguides and photonic crystal cavities using Finite-Difference Time-Domain and Finite-Difference Eigens… ▽ More Silicon carbide is evolving as a prominent solid-state platform for the realization of quantum information processing hardware. Angle-etched nanodevices are emerging as a solution to photonic integration in bulk substrates where color centers are best defined. We model triangular cross-section waveguides and photonic crystal cavities using Finite-Difference Time-Domain and Finite-Difference Eigensolver approaches. We analyze optimal color center positioning within the modes of these devices and provide estimates on achievable Purcell enhancement in nanocavities with applications in quantum communications. Using open quantum system modeling, we explore emitter-cavity interactions of multiple non-identical color centers coupled to both a single cavity and a photonic crystal molecule in SiC. We observe polariton and subradiant state formation in the cavity-protected regime of cavity quantum electrodynamics applicable in quantum simulation. △ Less

Submitted 19 January, 2022; v1 submitted 3 December, 2020; originally announced December 2020.

Journal ref: J. Phys. Photonics 3(2021) 034008

Generalized Lewis-Riesenfeld invariance for dynamical effective mass in jammed granullar media under a potential well in non-commutative space

Authors: Kalpana Biswas, Jyoti Prasad Saha, Pinaki Patra

Abstract: Consideration of the asteroid belt (Kuiper belt) as a jammed-granular media establishes a bridge between condensed matter physics and astrophysics. It opens up an experimental possibility to determine the deformation parameters for noncommutative space-time. Dynamics of the Kuiper belt can be simplified as dynamics of a dynamical effective mass for a jammed granular media under a gravitational wel… ▽ More Consideration of the asteroid belt (Kuiper belt) as a jammed-granular media establishes a bridge between condensed matter physics and astrophysics. It opens up an experimental possibility to determine the deformation parameters for noncommutative space-time. Dynamics of the Kuiper belt can be simplified as dynamics of a dynamical effective mass for a jammed granular media under a gravitational well. Alongside, if one considers the space-time to be noncommutative, then an experimental model for the determination of the deformation parameters for noncommutative space-time can be done. The construction of eigenfunctions and invariance for this model is in general a tricky problem. We have utilized the Lewis-Riesenfeld invariant method to determine the invariance for this time-dependent quantum system. In this article, we have shown that a class of generalized time-dependent Lewis-Riesenfeld invariant operators exist for the system with dynamical effective mass in jammed granular media under a potential well in noncommutative space. To keep the discussion fairly general, we have considered both position-position and momentum-momentum noncommutativity. Since, up to a time-dependent phase-factor, the eigenfunctions of the invariant operator will satisfy the time-dependent Schrödinger equation for the time-dependent Hamiltonian of the system, the construction of the invariant operator fairly solve the problem mathematically, the results of which can be utilized to demonstrate an experiment. △ Less

Submitted 24 April, 2023; v1 submitted 13 June, 2020; originally announced June 2020.

Comments: Serious flaw in Physical interpretation of the result is reported by the anonymous referees. Authors are in complete agreement of the flaws

Study of Anisotropic Compact Stars with Quintessence Field and Modified Chaplygin Gas in f(T) Gravity

Authors: Pameli Saha, Ujjal Debnath

Abstract: In this work, we get an idea of the existence of compact stars in the background of f(T) modified gravity where T is a scalar torsion. We acquire the equations of motion using anisotropic property within the spherically compact star with electromagnetic field, quintessence field and modified Chaplygin gas in the framework of modified f(T) gravity. Then by matching condition, we derive the unknown… ▽ More In this work, we get an idea of the existence of compact stars in the background of f(T) modified gravity where T is a scalar torsion. We acquire the equations of motion using anisotropic property within the spherically compact star with electromagnetic field, quintessence field and modified Chaplygin gas in the framework of modified f(T) gravity. Then by matching condition, we derive the unknown constants of our model to obtain many physical quantities to give a sketch of its nature and also study anisotropic behavior, energy conditions and stability. Finally, we estimate the numerical values of mass, surface redshift etc from our model to compare with the observational data for different types of compact stars. △ Less

Submitted 16 November, 2019; originally announced November 2019.

Comments: 20 pages, 20 figures

Journal ref: The European Physical Journal C, 2019

On the position dependent effective mass Hamiltonian

Authors: Kalpana Biswas, Jyoti Prasad Saha, Pinaki Patra

Abstract: Noncommutivity of position and momentum makes it difficult to formulate the unambiguous structure of the kinetic part of Hamiltonian for the position-dependent effective mass (PDEM). Various existing proposals of writing the viable kinetic part of the Hamiltonian for PDEM, conceptually lack from first principle calculation. Starting from the first principle calculation, in this article, we have ad… ▽ More Noncommutivity of position and momentum makes it difficult to formulate the unambiguous structure of the kinetic part of Hamiltonian for the position-dependent effective mass (PDEM). Various existing proposals of writing the viable kinetic part of the Hamiltonian for PDEM, conceptually lack from first principle calculation. Starting from the first principle calculation, in this article, we have advocated the proper self-adjoint form of the kinetic part of Hamiltonian for PDEM. We have proposed that ambiguity of construction of viable kinetic part for PDEM can be avoided if one takes the care from the Classical level combination of position and momentum. \\ In the quantum level, the spatial points do not appear in equivalent footing for the measure of inertia (mass). This exhibits the existence of an inertia potential. Thus the new structure of the Kinetic part differs from the existing structure of the kinetic part of Hamiltonian by providing an extra potential like contribution. This inertia potential can be absorbed with the external potential and redefine the known structure of PDEM under this effective potential. This enables us to apply the existing formalism of quantum mechanics. The coherent state structures for the newly proposed form of Hamiltonian are provided for a few simple experimentally important models. △ Less

Submitted 30 September, 2019; originally announced October 2019.

Comments: 14 pages, 0 figures

Journal ref: Eur. Phys. J. Plus 135, 457 (2020)

Smallest Fullerene-like Structures of Boron with Cr, Mo, and W Encapsulation

Authors: Amol B. Rahane, Pinaki Saha, N. Sukumar, Vijay Kumar

Abstract: Using density functional theory calculations, we study do** of a Cr, Mo, and W atom in boron clusters in the size range of 18-24 atoms and report the finding of metal atom encapsulated fullerene-like cage structures with 20 to 24 boron atoms in contrast to a fullerene-like structure of pure boron with 40 atoms. Our results show that bicapped drum-shaped structures are favored for neutral Cr@B… ▽ More Using density functional theory calculations, we study do** of a Cr, Mo, and W atom in boron clusters in the size range of 18-24 atoms and report the finding of metal atom encapsulated fullerene-like cage structures with 20 to 24 boron atoms in contrast to a fullerene-like structure of pure boron with 40 atoms. Our results show that bicapped drum-shaped structures are favored for neutral Cr@B$_{18}$, Mo@B$_{20}$, and W@B$_{20}$ clusters whereas a drum-shaped structure is preferred for neutral, cation, and anion of Mo@B$_{18}$ and W@B$_{18}$. Further, we find that B$_{20}$ is the smallest cage for Cr encapsulation, while B$_{22}$ is the smallest symmetric cage for Mo and W encapsulation and it is magic. Symmetric cage structures are also obtained for Mo@B$_{24}$ and W@B$_{24}$. A detailed analysis of the bonding character and molecular orbitals suggests that Cr@B$_{18}$, Cr@B$_{20}$, M@B$_{22}$ (M = Cr, Mo, and W) and M@B$_{24}$ (M = Mo and W) cages are stabilized with 18 $π$-bonded valence electrons whereas the drum-shaped M@B$_{18}$ (M = Mo and W) clusters are stabilized by 20 $π$-bonded valence electrons. Calculations with PBE0 functional in Gaussian 09 code show that in all cases of neutral clusters there is a large highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) gap. In some cases the lowest energy isomer of the charged clusters is different from the one for the neutral. We discuss the calculated infrared and Raman spectra for the neutral and cation clusters as well as the electronic structure of the anion clusters. Also we report results for isoelectronic anion and neutral clusters doped with V, Nb, and Ta which are generally similar to those obtained for Mo and W doped clusters. These results would be helpful to confirm the formation of these doped boron clusters experimentally. △ Less

Submitted 29 July, 2019; originally announced July 2019.

Comments: 33 pages, 12 figures, Supplementary Information Attached

Electrokinetic Power Harvesting from Wet Textile

Authors: Sankha Shuvra Das, Vinay Manaswi Pedireddi, Aditya Bandopadhyay, Partha Saha, Suman Chakraborty

Abstract: Develo** low-weight, frugal and sustainable power sources for resource-limited settings appears to be a challenging proposition for the advancement of next-generation sensing devices and beyond. Here, we report the use of centimeter-sized simple wet fabric pieces for electrical power generation, by deploying the interplay of a spontaneously induced ionic motion across fabric channels due to capi… ▽ More Develo** low-weight, frugal and sustainable power sources for resource-limited settings appears to be a challenging proposition for the advancement of next-generation sensing devices and beyond. Here, we report the use of centimeter-sized simple wet fabric pieces for electrical power generation, by deploying the interplay of a spontaneously induced ionic motion across fabric channels due to capillary action and simultaneous water evaporation by drawing thermal energy from the ambient. Unlike other reported devices with similar functionalities, our arrangement does not necessitate any input mechanical energy or complex topographical structures to be embedded in the substrate. A single device is capable of generating a sustainable open circuit potential up to 700 mV. This suffices establishing an inherent capability of functionalizing self-power electronic devices, and also to be potentially harnessed for enhanced power generation with feasible up-scaling. △ Less

Submitted 2 May, 2019; originally announced July 2019.

Comments: 12

Journal ref: Nano Letters, 2019, 19, 7191

Synthesis and Compression study of orthorhombic $Fe_7(C,Si)_3$: A possible constituent of the Earth's core

Authors: Pinku Saha, Konstantin Glazyrin, Goutam Dev Mukherjee

Abstract: The orthorhombic phase of Si-doped Fe carbide is synthesized at high pressures and temperatures using laser-heated diamond anvil cell (LHDAC), followed by its characterization using X-ray diffraction (XRD) measurements, Transmission Electron Microscopy (TEM), and Raman spectroscopy. High-pressure XRD measurements are carried out up to about 104 GPa at room temperature for determination of the equa… ▽ More The orthorhombic phase of Si-doped Fe carbide is synthesized at high pressures and temperatures using laser-heated diamond anvil cell (LHDAC), followed by its characterization using X-ray diffraction (XRD) measurements, Transmission Electron Microscopy (TEM), and Raman spectroscopy. High-pressure XRD measurements are carried out up to about 104 GPa at room temperature for determination of the equation of state (EOS) parameters of the synthesized sample. No evidence of structural transition is observed, though two anomalies are found in the compression behaviour of our sample at about 28 and 78 GPa, respectively. Pressure evolution of isothermal bulk modulus shows elastic stiffening around 28 GPa followed by softening around 78 GPa. These anomalies are possibly related to two different magnetic transitions driven by pressure-induced anisotropic strain in the unit cell. Extrapolation of the density profile of our study to the inner core conditions agrees very well with PREM data with an uncertainty of about 3-4%. We have estimate bulk modulus value seems to be 8-9% less than that of PREM data in the shown pressure range and is best matched in comparison to other reported values for the non-magnetic phase. △ Less

Submitted 16 November, 2020; v1 submitted 27 May, 2019; originally announced May 2019.

Triple differntial cross section for electron impact ionization of hydrogen atom

Authors: Hari P. Saha

Abstract: The electron impact ionization of atomic hydrogen is calculated for incident elrctron energy 76.46 eV. The Hartree-Fock approximation is used to calculate the initial state which includes both bound and continum wave functions. The final state continuum electron wave functions are obtained in the potential of hydrogen ion. The interaction between the two final state continuum electrons is approxim… ▽ More The electron impact ionization of atomic hydrogen is calculated for incident elrctron energy 76.46 eV. The Hartree-Fock approximation is used to calculate the initial state which includes both bound and continum wave functions. The final state continuum electron wave functions are obtained in the potential of hydrogen ion. The interaction between the two final state continuum electrons is approximated with the screening potential determined variationally. △ Less

Submitted 23 May, 2019; originally announced May 2019.

Controlled Electrokinetic Particle Manipulation using Paper-and-Pencil Microfluidics

Authors: Sankha Shuvra Das, Shantimoy Kar, Sayantan Dawn, Partha Saha, Suman Chakraborty

Abstract: Dielectrophoresis is a very promising technique for particle manipulation on a chip. In this study, we demonstrate a controlled mannuvering of polystryrene particles on a simple paper-and-pencil based device by exploiting the underlying electrokinetics with primary contribution from dielectrophoretic (DEP) forces. On contrary to other reported DEP devices, the present configuration does not demand… ▽ More Dielectrophoresis is a very promising technique for particle manipulation on a chip. In this study, we demonstrate a controlled mannuvering of polystryrene particles on a simple paper-and-pencil based device by exploiting the underlying electrokinetics with primary contribution from dielectrophoretic (DEP) forces. On contrary to other reported DEP devices, the present configuration does not demand a shophitcated laboratory module for creating a non-uniform electric field, which is essential requirement in DEP settings. We demonstrate positive dielectrophoresis (pDEP) to trap 1 um size polystyrene particle for low-conductivity suspending medium, at an applied field strength of 100 V/cm. In addition, the switching of the trap** direction (positive to negative dielectrophoresis) can be simply achieved by manipulating the conductivity of the media. We further bring out an optimum range of pH for effective particle trap**. These results have significant implications towards designing cell-on-a-chip based point of care diagnostic devices for resource limited settings. △ Less

Submitted 30 November, 2018; originally announced January 2019.

Comments: 21 pages

Journal ref: PHYS. REV. APPLIED 12, 054017 (2019)

Excimer laser cleaning of black sulphur encrustation from silver surface

Authors: Mohammad Shahid Raza, Sankha Shuvra Das, Parimal Tudu, Partha Saha

Abstract: The process of localized cleaning of silver sulphide from the silver surface has been investigated in this work. An artificial black encrustation was generated on the silver surface and its laser cleaning was performed using an excimer laser (KrF based) working at a wavelength of 248 nm and pulse width 25 ns. Laser process parameters i.e. laser fluence and number of pulses were used to perform the… ▽ More The process of localized cleaning of silver sulphide from the silver surface has been investigated in this work. An artificial black encrustation was generated on the silver surface and its laser cleaning was performed using an excimer laser (KrF based) working at a wavelength of 248 nm and pulse width 25 ns. Laser process parameters i.e. laser fluence and number of pulses were used to perform the experiment and after different optical, microstructural, elemental, microhardness and surface topography analysis of the laser ablated zone was performed. The parametric window selected for the excimer laser cleaning were laser fluence (200-400 mJ/cm2), repetition rate 4 Hz and number of pulses (60-300). It was observed that excimer laser is very effective in the cleaning of black encrustation having 6 wt. % of sulphur from the surface without any significant removal of the silver substrate. The fluence value of 260.48 mJ/cm2 was observed as above threshold value for removal of sulphide from the encrusted surface while a fluence of 384.85 mJ/cm2 and 220 pulses showed the maximum removal of sulphur encrustation (0.38 wt. % of sulphur remaining). Formation of the peripheral rim was observed to occur above 280.17 mJ/cm2 of fluence value. The topography of the ablated surface showed a removal of 5-10 um of the sulphide layer from the surface whereas the thickness of the sulphide coating was around 8-10 um. Microhardness value showed a change of microhardness of the silver surface from 75.12 HV0.5 (uncoated parent silver) to 96.07 HV0.5 (centre of the ablated zone).Finally, it was concluded that excimer laser cleaning is a novel method for localized removal of silver sulphide encrustation from silver surface. △ Less

Submitted 16 August, 2018; originally announced August 2018.

Comments: 20 pages

Journal ref: Opt. Laser Technol. 113 (2019) 95-103

Electrokinetic Energy Harvesting using Paper and Pencil

Authors: Sankha Shuvra Das, Shantimoy Kar, Tarique Anwar, Partha Saha, Suman Chakraborty

Abstract: We exploit the combinatorial advantage of electrokinetics and tortutosity of cellulose-based paper network on a laboratory grade filter paper for the development of a simple, inexpensive, yet extremely robust (shows constant performance till 12 days) paper-and-pencil-based device for energy harvesting application. We successfully achieve to harvest maximum output power of 640 pW in single channel,… ▽ More We exploit the combinatorial advantage of electrokinetics and tortutosity of cellulose-based paper network on a laboratory grade filter paper for the development of a simple, inexpensive, yet extremely robust (shows constant performance till 12 days) paper-and-pencil-based device for energy harvesting application. We successfully achieve to harvest maximum output power of 640 pW in single channel, while the same is significantly improved (by about 100 times) with the use of multichannel microfluidic array (maximum up to 20 channels). We envisage that such ultra-low cost devices may turn out to be extremely useful in energizing analytical microdevices in resource limited settings, for instance for extreme point of care diagnostics applications. △ Less

Submitted 2 February, 2018; originally announced February 2018.

Comments: 12 pages

Journal ref: Lab Chip, 2018, 18, 1560-1568

Spacecraft Clocks and Relativity: Prospects for Future Satellite Missions

Authors: Raymond Angélil, Prasenjit Saha, Ruxandra Bondarescu, Philippe Jetzer, Andreas Schärer, Andrew Lundgren

Abstract: The successful miniaturization of extremely accurate atomic clocks invites prospects for satellite missions to perform precise timing experiments. This will allow effects predicted by general relativity to be detected in Earth's gravitational field. In this paper we introduce a convenient formalism for studying these effects, and compute the fractional timing differences generated by them for the… ▽ More The successful miniaturization of extremely accurate atomic clocks invites prospects for satellite missions to perform precise timing experiments. This will allow effects predicted by general relativity to be detected in Earth's gravitational field. In this paper we introduce a convenient formalism for studying these effects, and compute the fractional timing differences generated by them for the orbit of a satellite capable of accurate time transfer to a terrestrial receiving station on Earth, as proposed by planned missions. We find that (1) Schwarzschild perturbations would be measurable through their effects both on the orbit and on the signal propagation, (2) frame-dragging of the orbit would be readily measurable, and (3) in optimistic scenarios, the spin-squared metric effects may be measurable for the first time ever. Our estimates suggest that a clock with a fractional timing inaccuracy of $10^{-16}$ on a highly eccentric Earth orbit will measure all these effects, while for a low Earth circular orbit like that of the Atomic Clock Ensemble in Space Mission, detection will be more challenging. △ Less

Submitted 11 March, 2014; v1 submitted 26 February, 2014; originally announced February 2014.

Comments: Accepted for publication in Physical Review D. Typos corrected

Journal ref: Phys. Rev. D. 89. 064067 (2014)