-
Combined Pre-Supernova Alert System with Kamland and Super-Kamiokande
Authors:
KamLAND,
Super-Kamiokande Collaborations,
:,
Seisho Abe,
Minori Eizuka,
Sawako Futagi,
Azusa Gando,
Yoshihito Gando,
Shun Goto,
Takahiko Hachiya,
Kazumi Hata,
Koichi Ichimura,
Sei Ieki,
Haruo Ikeda,
Kunio Inoue,
Koji Ishidoshiro,
Yuto Kamei,
Nanami Kawada,
Yasuhiro Kishimoto,
Masayuki Koga,
Maho Kurasawa,
Tadao Mitsui,
Haruhiko Miyake,
Daisuke Morita,
Takeshi Nakahata
, et al. (290 additional authors not shown)
Abstract:
Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are ob…
▽ More
Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are observed, an early warning of the upcoming core-collapse supernova can be provided. In light of this, KamLAND and Super-Kamiokande, both located in the Kamioka mine in Japan, have been monitoring pre-supernova neutrinos since 2015 and 2021, respectively. Recently, we performed a joint study between KamLAND and Super-Kamiokande on pre-supernova neutrino detection. A pre-supernova alert system combining the KamLAND detector and the Super-Kamiokande detector was developed and put into operation, which can provide a supernova alert to the astrophysics community. Fully leveraging the complementary properties of these two detectors, the combined alert is expected to resolve a pre-supernova neutrino signal from a 15 M$_{\odot}$ star within 510 pc of the Earth, at a significance level corresponding to a false alarm rate of no more than 1 per century. For a Betelgeuse-like model with optimistic parameters, it can provide early warnings up to 12 hours in advance.
△ Less
Submitted 1 July, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Evaluation of optical constants in oxide thin films using machine learning
Authors:
Kyosuke Saeki,
Takayuki Makino
Abstract:
This paper describes an inverse analysis method using neural networks on optical spectroscopy, and its application to the quantitative optical constant evaluation. The present method consists of three subprocesses. First, measurable UV-visible spectroscopic quantities were calculated as functions of the optical constants of the solid based on the Tomlin equations [J. Phys. D 1 1667 (1968)] by care…
▽ More
This paper describes an inverse analysis method using neural networks on optical spectroscopy, and its application to the quantitative optical constant evaluation. The present method consists of three subprocesses. First, measurable UV-visible spectroscopic quantities were calculated as functions of the optical constants of the solid based on the Tomlin equations [J. Phys. D 1 1667 (1968)] by carefully eliminating the unpractical combinations of optical constants. Second, the back-propagation neural network is trained using the calculated relationships between the measurable quantities and the optical constants. Finally, the trained network is utilized to determine the optical constants from measured responses. The conventional (Newton-Raphson) method tends to require the judgement of a well-experienced analyst, while machine learning shows automatically human-free performance in data conversion.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Fluid mode spectroscopy for measuring kinematic viscosity of fluids in open cylindrical containers
Authors:
Hideshi Ishida,
Masaaki Horie,
Takahiro Harada,
Shingo Mizuno,
Seita Hamada,
Haruki Imura,
Shoma Ashiwake,
Naoya Isayama,
Ryomei Saeki,
Ryotaro Kozono,
Daichi Taki,
Asuka Kurose
Abstract:
On a daily basis we stir tee or coffee with a spoon and leave it to rest. We know empirically the larger the stickiness, viscosity, of the fluid, more rapidly its velocity slows down. It is surprising, therefore, that the variation, the decay rate of the velocity, has not been utilized for measuring (kinematic) viscosity of fluids. This study shows that a spectroscopy decomposing a velocity field…
▽ More
On a daily basis we stir tee or coffee with a spoon and leave it to rest. We know empirically the larger the stickiness, viscosity, of the fluid, more rapidly its velocity slows down. It is surprising, therefore, that the variation, the decay rate of the velocity, has not been utilized for measuring (kinematic) viscosity of fluids. This study shows that a spectroscopy decomposing a velocity field into fluid modes (Stokes eigenmodes) allows us to measure accurately the kinematic viscosity. The method, Fluid Mode Spectroscopy (FMS), is based on the fact that each Stokes eigenmode has its inherent decay rate of eigenvalue and that the dimensionless rate of the slowest decaying mode (SDM) is constant, dependent only on the normalized shape of a fluid container, obtained analytically for some shapes including cylindrical containers. The FMS supplements major conventional measuring methods with each other, particularly useful for measuring relatively low kinematic viscosity and for a direct measurement of viscosity at zero shear rate without extrapolation. The method is validated by the experiments of water poured into an open cylindrical container, as well as by the corresponding numerical simulations.
△ Less
Submitted 16 May, 2023; v1 submitted 12 April, 2023;
originally announced April 2023.
-
Next-Generation Superconducting RF Technology based on Advanced Thin Film Technologies and Innovative Materials for Accelerator Enhanced Performance and Energy Reach
Authors:
A. - M. Valente-Feliciano,
C. Antoine,
S. Anlage,
G. Ciovati,
J. Delayen,
F. Gerigk,
A. Gurevich,
T. Junginger,
S. Keckert,
G. Keppe,
J. Knobloch,
T. Kubo,
O. Kugeler,
D. Manos,
C. Pira,
T. Proslier,
U. Pudasaini,
C. E. Reece,
R. A. Rimmer,
G. J. Rosaz,
T. Saeki,
R. Vaglio,
R. Valizadeh,
H. Vennekate,
W. Venturini Delsolaro
, et al. (3 additional authors not shown)
Abstract:
Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generat…
▽ More
Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generation thin-film based cavities. Nb on Cu cavities are developed to perform as good as or better than bulk Nb at reduced cost and with better thermal stability. Recent results showing improved accelerating field and dramatically reduced Q slope show their potential for many applications. The second research thrust is to develop cavities coated with materials that can operate at higher temperatures or sustain higher fields. Proof of principle has been established for the merit of Nb3Sn for SRF application. Research is now needed to further exploit the material and reach its full potential with novel deposition techniques. The third line of research is to push SRF performance beyond the capabilities of the superconductors alone with multilayered coatings. In parallel, developments are needed to provide quality substrates, cooling schemes and cryomodule design tailored to thin film cavities. Recent results in these three research thrusts suggest that SRF thin film technologies are at the eve of a technological revolution. For them to mature, active community support and sustained funding are needed to address fundamental developments supporting material deposition techniques, surface and RF research, technical challenges associated with scaling and industrialization. With dedicated and sustained investment, next-generation thin-film based cavities will become a reality with high performance and efficiency, facilitating energy sustainable science while enabling higher luminosity, and higher energy.
△ Less
Submitted 5 April, 2022;
originally announced April 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Medium-Grain Niobium SRF Cavity Production Technology for Science Frontiers and Accelerator Applications
Authors:
G. Myneni,
Hani E. Elsayed-Ali,
Md Obidul Islam,
Md Nizam Sayeed,
G. Ciovati,
P. Dhakal,
R. A. Rimmer,
M. Carl,
A. Fajardo,
N. Lannoy,
B. Khanal,
T. Dohmae,
A. Kumar,
T. Saeki,
K. Umemori,
M. Yamanaka,
S. Michizono,
A. Yamamoto
Abstract:
We propose cost-effective production of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with sub-millimeter average grain size resulting in stable SRF cavity production. We propose to apply this material to particle accelerator applications in the science and indus…
▽ More
We propose cost-effective production of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with sub-millimeter average grain size resulting in stable SRF cavity production. We propose to apply this material to particle accelerator applications in the science and industrial frontiers. The science applications require high field gradients (>~40 MV/m) particularly in pulse mode. The industrial applications require high Q0 values with moderate gradients (~30 MV/m) in CW mode operation. This report describes the MG Nb disc production recently demonstrated and discusses future prospects for application in advanced particle accelerators in the science and industrial frontiers.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
Tin(II) thiocyanate Sn(SCN)$_2$ as an ultrathin anode interlayer in organic photovoltaics
Authors:
Jidapa Chaopaknam,
Chayanit Wechwithayakhlung,
Hideki Nakajima,
Tossaporn Lertvanithphol,
Mati Horprathum,
Taweesak Sudyoadsuk,
Vinich Promarak,
Akinori Saeki,
Pichaya Pattanasattayavong
Abstract:
We report the application of a coordination polymer semiconductor, tin(II) thiocyanate [Sn(SCN)$_2$] as an ultrathin anode interlayer in organic photovoltaics (OPVs). Sub-10 nm layers of Sn(SCN)$_2$ with high smoothness and excellent transparency having an optical band gap of 3.9 eV were deposited from an alcohol-based solution at room temperature without post-deposition annealing. Inserting Sn(SC…
▽ More
We report the application of a coordination polymer semiconductor, tin(II) thiocyanate [Sn(SCN)$_2$] as an ultrathin anode interlayer in organic photovoltaics (OPVs). Sub-10 nm layers of Sn(SCN)$_2$ with high smoothness and excellent transparency having an optical band gap of 3.9 eV were deposited from an alcohol-based solution at room temperature without post-deposition annealing. Inserting Sn(SCN)$_2$ as an anode interlayer in polymer:fullerene OPVs drastically reduces the recombination loss due to the exciton-blocking energy levels of Sn(SCN)$_2$. At the optimum thickness of 7 nm, an average power conversion efficiency (PCE) of 7.6% and a maximum of 8.1% were obtained. The simple processability using common solvents gives Sn(SCN)$_2$ a distinct advantage over the more well-known copper(I) thiocyanate (CuSCN). The electronic and optical properties of Sn(SCN)$_2$ make it interesting for applications in large-area electronic devices.
△ Less
Submitted 12 August, 2021; v1 submitted 3 May, 2021;
originally announced May 2021.
-
Alkali ion-to-neutral atom converter for the magneto-optical trap of a radioactive isotope
Authors:
Hirokazu Kawamura,
Ken-ichi Harada,
Tomoya Sato,
Saki Ezure,
Hiroshi Arikawa,
Takeshi Furukawa,
Tomohiro Hayamizu,
Takeshi Inoue,
Taisuke Ishikawa,
Masatoshi Itoh,
Tomohiro Kato,
Akihito Oikawa,
Takatoshi Aoki,
Atsushi Hatakeyama,
Yasuhiro Sakemi
Abstract:
We have developed a unique neutralizer device that uses an yttrium target surrounded by a platinum wall to magneto-optically trap radioactive atoms. In general, the radioactive nucleus produced in a nuclear reaction is extracted and transported in ion form. For the magneto-optical trap, thermal neutralization must occur on the surface of a metal with a small work function. The converter can produc…
▽ More
We have developed a unique neutralizer device that uses an yttrium target surrounded by a platinum wall to magneto-optically trap radioactive atoms. In general, the radioactive nucleus produced in a nuclear reaction is extracted and transported in ion form. For the magneto-optical trap, thermal neutralization must occur on the surface of a metal with a small work function. The converter can produce a neutral atomic beam with small angular divergence that, given the recycling of atoms and ions, converts ions into neutral atoms with remarkable efficiency. We demonstrated the ion neutralization process using stable rubidium and confirmed $10^6$ neutralized atoms in the magneto-optical trap. Additionally, the experiment using francium demonstrated the obtaining of neutralized francium atoms.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Evaluation of the superconducting characteristics of multi-layer thin-film structures of NbN and SiO$_2$ on pure Nb substrate
Authors:
R. Katayama,
H. Hayano,
T. Kubo,
T. Saeki,
Hayato Ito,
Y. Iwashita,
H. Tongu,
C. Z. Antoine,
R. Ito,
T. Nagata
Abstract:
In recent years, it has been pointed out that the maximum accelerating gradient of a superconducting RF cavity can be increased by coating the inner surface of the cavity with a multilayer thin-film structure consisting of alternating insulating and superconducting layers. In this structure, the principal parameter that limits the performance of the cavity is the critical magnetic field or effecti…
▽ More
In recent years, it has been pointed out that the maximum accelerating gradient of a superconducting RF cavity can be increased by coating the inner surface of the cavity with a multilayer thin-film structure consisting of alternating insulating and superconducting layers. In this structure, the principal parameter that limits the performance of the cavity is the critical magnetic field or effective $H_{C1}$ at which vortices begin penetrating into the superconductor layer. This is predicted to depend on the combination of the film thickness. We made samples that have a NbN/SiO$_2$ thin-film structure on a pure Nb substrate with several layers of NbN film deposited using DC magnetron sputtering method. Here, we report the measurement results of effective $H_{C1}$ of NbN/SiO$_2$(30 nm)/Nb multilayer samples with thicknesses of NbN layers in the range from 50 nm to 800 nm by using the third-harmonic voltage method. Experimental results show that an optimum thickness exists, which increases the effective $H_{C1}$ by 23.8 %.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Lower critical field measurement of NbN multilayer thin film superconductor at KEK
Authors:
H. Ito,
H. Hayano,
T. Kubo,
T. Saeki,
R. Katayama,
Y. Iwashita,
H. Tongu,
R. Ito,
T. Nagata,
C. Z. Antoine
Abstract:
The multilayer thin film structure of the superconductor has been proposed by A. Gurevich to enhance the maximum gradient of SRF cavities. The lower critical field Hc1 at which the vortex starts penetrating the superconducting material will be improved by coating Nb with thin film superconductor such as NbN. It is expected that the enhancement of Hc1 depends on the thickness of each layer. In orde…
▽ More
The multilayer thin film structure of the superconductor has been proposed by A. Gurevich to enhance the maximum gradient of SRF cavities. The lower critical field Hc1 at which the vortex starts penetrating the superconducting material will be improved by coating Nb with thin film superconductor such as NbN. It is expected that the enhancement of Hc1 depends on the thickness of each layer. In order to determine the optimum thickness of each layer and to compare the measurement results with the theoretical prediction proposed by T. Kubo, we developed the Hc1 measurement system using the third harmonic response of the applied AC magnetic field at KEK. For the Hc1 measurement without the influence of the edge or the shape effects, the AC magnetic field can be applied locally by the solenoid coil of 5mm diameter in our measurement system. ULVAC made the NbN-SiO2 multilayer thin film samples of various NbN thicknesses. In this report, the measurement result of the bulk Nb sample and NbN-SiO2 multilayer thin film samples of different thickness of NbN layer will be discussed.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Lower Critical Field Measurement System based on Third-Harmonic Method for Superconducting RF Materials
Authors:
Hayato Ito,
Hitoshi Hayano,
Takayuki Kubo,
Takayuki Saeki
Abstract:
We develop a lower critical field (Hc1) measurement system using the third-harmonic response of an applied AC magnetic field from a solenoid coil positioned above a superconducting sample. Parameter Hc1 is measured via detection of the third-harmonic component, which drastically changes when a vortex begins to penetrate the superconductor with temperature increase. The magnetic field locally appli…
▽ More
We develop a lower critical field (Hc1) measurement system using the third-harmonic response of an applied AC magnetic field from a solenoid coil positioned above a superconducting sample. Parameter Hc1 is measured via detection of the third-harmonic component, which drastically changes when a vortex begins to penetrate the superconductor with temperature increase. The magnetic field locally applied to one side of the sample mimics the magnetic field within superconducting radio-frequency (SRF) cavities and prevents edge effects of the superconducting sample. With this approach, our measurement system can potentially characterize surface-engineered SRF materials such as Superconductor-Insulator-Superconductor multilayer structure (S-I-S structure). As a validation test, we measure the temperature dependence of Hc1 of two high-RRR bulk Nb samples and obtain results consistent with the literature. We also confirm that our system can apply magnetic fields of at least 120 mT at 4-5 K without any problem of heat generation of the coil. This field value is higher than those reported in previous works and makes it possible to more accurately estimate Hc1 at lower temperatures.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
Review of short-range gravity experiments in the LHC era
Authors:
Jiro Murata,
Saki Tanaka
Abstract:
This document briefly reviews recent short-range gravity experiments that were performed at below laboratory scales to test the Newtonian inverse square law of gravity. To compare sensitivities of these measurements, estimates using the conventional Yukawa parametrization are introduced. Since these experiments were triggered by the prediction of the large extra-dimension model, experiments perfor…
▽ More
This document briefly reviews recent short-range gravity experiments that were performed at below laboratory scales to test the Newtonian inverse square law of gravity. To compare sensitivities of these measurements, estimates using the conventional Yukawa parametrization are introduced. Since these experiments were triggered by the prediction of the large extra-dimension model, experiments performed at different length scales are compared with this prediction. In this paper, a direct comparison between laboratory-scale experiments and the LHC results is presented for the first time. A laboratory experiment is shown to determine the best limit at $M_D > 4.6 \;\rm{TeV}$ and $λ<23 \;μ\rm{m}$. In addition, new analysis results are described for atomic systems used as gravitational microlaboratories.
△ Less
Submitted 19 August, 2014; v1 submitted 15 August, 2014;
originally announced August 2014.
-
Review of the multilayer coating model
Authors:
Takayuki Kubo,
Yoshihisa Iwashita,
Takayuki Saeki
Abstract:
The recent theoretical study on the multilayer-coating model published in Applied Physics Letters [1] is reviewed. Magnetic-field attenuation behavior in a multilayer coating model is different from a semi-infinite superconductor and a superconducting thin film. This difference causes that of the vortex-penetration field at which the Bean-Livingston surface barrier disappears. A material with smal…
▽ More
The recent theoretical study on the multilayer-coating model published in Applied Physics Letters [1] is reviewed. Magnetic-field attenuation behavior in a multilayer coating model is different from a semi-infinite superconductor and a superconducting thin film. This difference causes that of the vortex-penetration field at which the Bean-Livingston surface barrier disappears. A material with smaller penetration depth, such as a pure Nb, is preferable as the substrate for pushing up the vortex-penetration field of the superconductor layer. The field limit of the whole structure of the multilayer coating model is limited not only by the vortex-penetration field of the superconductor layer, but also by that of the substrate. Appropriate thicknesses of superconductor and insulator layers can be extracted from contour plots of the field limit of the multilayer coating model given in Ref.[1].
△ Less
Submitted 2 July, 2014;
originally announced July 2014.
-
Incidence Angle and Polarization Dependence of Photo-Induced FMR in Co/Pd Multilayers
Authors:
J. Saeki,
K. Nishibayashi,
T. Matsuda,
Y. Kitamoto,
H. Munekata
Abstract:
Dependence of photo-induced FMR (phi-FMR) on incident angle of excitation and probing laser beams has been studied in a [Co (dCo = 0.78 nm) / Pd (dPd = 0.81 nm) ]5 multi-layer film with the aim to find experimentally the limitation of inducement and detection of magnetization dynamics with oblique light incidence. We have found, in the experiments changing the incident angle of a pump beam, that p…
▽ More
Dependence of photo-induced FMR (phi-FMR) on incident angle of excitation and probing laser beams has been studied in a [Co (dCo = 0.78 nm) / Pd (dPd = 0.81 nm) ]5 multi-layer film with the aim to find experimentally the limitation of inducement and detection of magnetization dynamics with oblique light incidence. We have found, in the experiments changing the incident angle of a pump beam, that phi-FMR is observed up to the grazing incident angle of 88 degrees with p-polarized excitation pulses, whereas it disappears at the incidence angle of around 65 degrees with s-polarized excitation. As for the experiments changing the incident angle of a probe beam, phi-FMR disappears at the incidence angle of 65 degrees for both s- and p-polarizations, whereas it reappears with further increasing the angle for the p-polarization and vanishes at 75 degrees.
△ Less
Submitted 16 April, 2014;
originally announced April 2014.
-
Vortex penetration field of the multilayer coating model
Authors:
Takayuki Kubo,
Yoshihisa Iwashita,
Takayuki Saeki
Abstract:
The vortex penetration field of the multilayer coating model with a single superconductor layer and a single insulator layer formed on a bulk superconductor are derived. The same formula can be applied to a model with a superconductor layer formed on a bulk superconductor without an insulator layer.
The vortex penetration field of the multilayer coating model with a single superconductor layer and a single insulator layer formed on a bulk superconductor are derived. The same formula can be applied to a model with a superconductor layer formed on a bulk superconductor without an insulator layer.
△ Less
Submitted 1 July, 2013;
originally announced July 2013.
-
RF field-attenuation formulae for the multilayer coating model
Authors:
Takayuki Kubo,
Takayuki Saeki,
Yoshihisa Iwashita
Abstract:
Formulae that describe the RF electromagnetic field attenuation for the multilayer coating model with a single superconductor layer and a single insulator layer deposited on a bulk superconductor are derived from a rigorous calculation with the Maxwell equations and the London equation.
Formulae that describe the RF electromagnetic field attenuation for the multilayer coating model with a single superconductor layer and a single insulator layer deposited on a bulk superconductor are derived from a rigorous calculation with the Maxwell equations and the London equation.
△ Less
Submitted 30 July, 2013; v1 submitted 20 June, 2013;
originally announced June 2013.
-
Radio-frequency electromagnetic field and vortex penetration in multilayered superconductors
Authors:
Takayuki Kubo,
Yoshihisa Iwashita,
Takayuki Saeki
Abstract:
A multilayered structure with a single superconductor layer and a single insulator layer formed on a bulk superconductor is studied. General formulae for the vortex-penetration field of the superconductor layer and the magnetic field on the bulk superconductor, which is shielded by the superconductor and insulator layers, are derived with a rigorous calculation of the magnetic field attenuation in…
▽ More
A multilayered structure with a single superconductor layer and a single insulator layer formed on a bulk superconductor is studied. General formulae for the vortex-penetration field of the superconductor layer and the magnetic field on the bulk superconductor, which is shielded by the superconductor and insulator layers, are derived with a rigorous calculation of the magnetic field attenuation in the multilayered structure. The achievable peak surface field depends on the thickness and its material of the superconductor layer, the thickness of the insulator layer and material of the bulk superconductor. The calculation shows a good agreement with an experimental result. A combination of the thicknesses of superconductor and insulator layers to enhance the field limit can be given by the formulae for any given materials.
△ Less
Submitted 9 January, 2014; v1 submitted 25 April, 2013;
originally announced April 2013.
