-
Understanding active learning of molecular docking and its applications
Authors:
Jeonghyeon Kim,
Juno Nam,
Seongok Ryu
Abstract:
With the advancing capabilities of computational methodologies and resources, ultra-large-scale virtual screening via molecular docking has emerged as a prominent strategy for in silico hit discovery. Given the exhaustive nature of ultra-large-scale virtual screening, active learning methodologies have garnered attention as a means to mitigate computational cost through iterative small-scale docki…
▽ More
With the advancing capabilities of computational methodologies and resources, ultra-large-scale virtual screening via molecular docking has emerged as a prominent strategy for in silico hit discovery. Given the exhaustive nature of ultra-large-scale virtual screening, active learning methodologies have garnered attention as a means to mitigate computational cost through iterative small-scale docking and machine learning model training. While the efficacy of active learning methodologies has been empirically validated in extant literature, a critical investigation remains in how surrogate models can predict docking score without considering three-dimensional structural features, such as receptor conformation and binding poses. In this paper, we thus investigate how active learning methodologies effectively predict docking scores using only 2D structures and under what circumstances they may work particularly well through benchmark studies encompassing six receptor targets. Our findings suggest that surrogate models tend to memorize structural patterns prevalent in high docking scored compounds obtained during acquisition steps. Despite this tendency, surrogate models demonstrate utility in virtual screening, as exemplified in the identification of actives from DUD-E dataset and high docking-scored compounds from EnamineReal library, a significantly larger set than the initial screening pool. Our comprehensive analysis underscores the reliability and potential applicability of active learning methodologies in virtual screening campaigns.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Good plasmons in a bad metal
Authors:
Francesco L. Ruta,
Yinming Shao,
Swagata Acharya,
Anqi Mu,
Na Hyun Jo,
Sae Hee Ryu,
Daria Balatsky,
Dimitar Pashov,
Brian S. Y. Kim,
Mikhail I. Katsnelson,
James G. Analytis,
Eli Rotenberg,
Andrew J. Millis,
Mark van Schilfgaarde,
D. N. Basov
Abstract:
Correlated materials may exhibit unusually high resistivity increasing linearly in temperature, breaking through the Mott-Ioffe-Regel bound, above which coherent quasiparticles are destroyed. The fate of collective charge excitations, or plasmons, in these systems is a subject of debate. Several studies suggest plasmons are overdamped while others detect unrenormalized plasmons. Here, we present d…
▽ More
Correlated materials may exhibit unusually high resistivity increasing linearly in temperature, breaking through the Mott-Ioffe-Regel bound, above which coherent quasiparticles are destroyed. The fate of collective charge excitations, or plasmons, in these systems is a subject of debate. Several studies suggest plasmons are overdamped while others detect unrenormalized plasmons. Here, we present direct optical images of low-loss hyperbolic plasmon polaritons (HPPs) in the correlated van der Waals metal MoOCl2. HPPs are plasmon-photon modes that waveguide through extremely anisotropic media and are remarkably long-lived in MoOCl2. Many-body theory supported by photoemission results reveals that MoOCl2 is in an orbital-selective and highly incoherent Peierls phase. Different orbitals acquire markedly different bonding-antibonding character, producing a highly-anisotropic, isolated Fermi surface. The Fermi surface is further reconstructed and made partly incoherent by electronic interactions, renormalizing the plasma frequency. HPPs remain long-lived in spite of this, allowing us to uncover previously unseen imprints of electronic correlations on plasmonic collective modes.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
Effect of Resonant Acoustic Powder Mixing on Delay Time of W-KClO4-BaCrO4 Mixtures
Authors:
Kyungmin Kwon,
Seunghwan Ryu,
Soyun Joo,
Youngjoon Han,
Donghyeon Baek,
Moonsoo Park,
Dongwon Kim,
Seungbum Hong
Abstract:
This study investigates the impact of resonant acoustic powder mixing on the delay time of the W-KClO4-BaCrO4 (WKB) mixture and its potential implications for powder and material synthesis. Through thermal analysis, an inverse linear relationship was found between thermal conductivity and delay time, allowing us to use thermal conductivity as a reliable proxy for the delay time. By comparing the t…
▽ More
This study investigates the impact of resonant acoustic powder mixing on the delay time of the W-KClO4-BaCrO4 (WKB) mixture and its potential implications for powder and material synthesis. Through thermal analysis, an inverse linear relationship was found between thermal conductivity and delay time, allowing us to use thermal conductivity as a reliable proxy for the delay time. By comparing the thermal conductivity of WKB mixtures mixed manually and using acoustic powder mixer, we found that acoustic powder mixing resulted in minimal deviations in thermal conductivity, proving more uniform mixing. Furthermore, DSC analysis and Sestak-Berggren modeling demonstrated consistent reaction dynamics with a constant activation energy as the reaction progressed in samples mixed using acoustic waves. These findings underscore the critical role of uniform powder mixing in enhancing the thermodynamic quality of the WKB mixture and emphasize the importance of develo** novel methods for powder and material synthesis.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Interfacial-Water-Modulated Photoluminescence of Single-Layer WS$_2$ on Mica
Authors:
Yanghee Kim,
Haneul Kang,
Myongin Song,
Hyuksang Kwon,
Sunmin Ryu
Abstract:
Because of their bandgap tunability and strong light-matter interactions, two-dimensional (2D) semiconductors are considered promising candidates for next-generation optoelectronic devices. However, their photophysical properties are greatly affected by environments because of their 2D nature. In this work, we report that the photoluminescence (PL) of single-layer WS$_2$ is substantially affected…
▽ More
Because of their bandgap tunability and strong light-matter interactions, two-dimensional (2D) semiconductors are considered promising candidates for next-generation optoelectronic devices. However, their photophysical properties are greatly affected by environments because of their 2D nature. In this work, we report that the photoluminescence (PL) of single-layer WS$_2$ is substantially affected by interfacial water that is inevitably present between itself and supporting mica substrates. Using PL spectroscopy and wide-field imaging, we show that the emission signals from A excitons and their negative trions decreased at distinctively different rates with increasing excitation power, which can be attributed to the more efficient annihilation between excitons than trions. By gas-controlled PL imaging, we also prove that interfacial water converts trions into excitons by depleting native negative charges through an oxygen reduction reaction, which renders excited WS$_2$ more susceptible to nonradiative decay via exciton-exciton annihilation. Understanding the roles of nanoscopic water in complex low-dimensional materials will eventually contribute to devising their novel functions and devices.
△ Less
Submitted 8 February, 2023;
originally announced February 2023.
-
Measured and projected beam backgrounds in the Belle II experiment at the SuperKEKB collider
Authors:
A. Natochii,
T. E. Browder,
L. Cao,
G. Cautero,
S. Dreyer,
A. Frey,
A. Gabrielli,
D. Giuressi,
T. Ishibashi,
Y. **,
K. Kojima,
T. Kraetzschmar,
L. Lanceri,
Z. Liptak,
D. Liventsev,
C. Marinas,
L. Massaccesi,
K. Matsuoka,
F. Meier,
C. Miller,
H. Nakayama,
C. Niebuhr,
A. Novosel,
K. Parham,
I. Popov
, et al. (21 additional authors not shown)
Abstract:
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model. SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak l…
▽ More
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model. SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak luminosity of $\rm 6 \times 10^{35}~cm^{-2}s^{-1}$ by further increasing the beam currents and reducing the beam size at the interaction point by squeezing the betatron function down to $β^{*}_{\rm y}=\rm 0.3~mm$. To ensure detector longevity and maintain good reconstruction performance, beam backgrounds must remain well controlled. We report on current background rates in Belle II and compare these against simulation. We find that a number of recent refinements have significantly improved the background simulation accuracy. Finally, we estimate the safety margins going forward. We predict that backgrounds should remain high but acceptable until a luminosity of at least $\rm 2.8 \times 10^{35}~cm^{-2}s^{-1}$ is reached for $β^{*}_{\rm y}=\rm 0.6~mm$. At this point, the most vulnerable Belle II detectors, the Time-of-Propagation (TOP) particle identification system and the Central Drift Chamber (CDC), have predicted background hit rates from single-beam and luminosity backgrounds that add up to approximately half of the maximum acceptable rates.
△ Less
Submitted 11 December, 2023; v1 submitted 3 February, 2023;
originally announced February 2023.
-
Photoluminescence Path Bifurcations by Spin Flip in Two-Dimensional CrPS4
Authors:
Suhyeon Kim,
Sangho Yoon,
Hyo-Bin Ahn,
Gangtae **,
Hyesun Kim,
Moon-Ho Jo,
Changgu Lee,
Jonghwan Kim,
Sunmin Ryu
Abstract:
Ultrathin layered crystals of coordinated chromium(III) are promising not only as two-dimensional (2D) magnets but also as 2D near-infrared (NIR) emitters owing to long-range spin correlation and efficient transition between high and low-spin excited states of Cr3+ ions. In this study, we report on dual-band NIR photoluminescence (PL) of CrPS4 and show that its excitonic emission bifurcates into f…
▽ More
Ultrathin layered crystals of coordinated chromium(III) are promising not only as two-dimensional (2D) magnets but also as 2D near-infrared (NIR) emitters owing to long-range spin correlation and efficient transition between high and low-spin excited states of Cr3+ ions. In this study, we report on dual-band NIR photoluminescence (PL) of CrPS4 and show that its excitonic emission bifurcates into fluorescence and phosphorescence depending on thickness, temperature and defect density. In addition to the spectral branching, the biexponential decay of PL transients, also affected by the three factors, could be well described within a three-level kinetic model for Cr(III). In essence, the PL bifurcations are governed by activated reverse intersystem crossing from the low to high-spin states, and the transition barrier becomes lower for thinner 2D samples because of surface-localized defects. Our findings can be generalized to 2D solids of coordinated metals and will be valuable in realizing novel magneto-optic functions and devices.
△ Less
Submitted 20 September, 2022; v1 submitted 8 June, 2022;
originally announced June 2022.
-
Multi-dimensional structure of C. elegans thermal learning
Authors:
Ahmed Roman,
Konstantine Palanski,
Ilya Nemenman,
William S Ryu
Abstract:
Quantitative models of associative learning that explain the behavior of real animals with high precision have turned out very difficult to construct. We do this in the context of the dynamics of the thermal preference of C. elegans. For this, we quantify C. elegans thermotaxis in response to various conditioning parameters, genetic perturbations, and operant behavior using a fast, high-throughput…
▽ More
Quantitative models of associative learning that explain the behavior of real animals with high precision have turned out very difficult to construct. We do this in the context of the dynamics of the thermal preference of C. elegans. For this, we quantify C. elegans thermotaxis in response to various conditioning parameters, genetic perturbations, and operant behavior using a fast, high-throughput microfluidic droplet assay. We then model this data comprehensively, within a new, biologically interpretable, multi-modal framework. We discover that the dynamics of thermal preference are described by two independent contributions and require a model with at least four dynamical variables. One pathway positively associates the experienced temperature independently of food and the other negatively associates to the temperature when food is absent.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Beam background expectations for Belle II at SuperKEKB
Authors:
A. Natochii,
T. E. Browder,
L. Cao,
K. Kojima,
D. Liventsev,
F. Meier,
K. R. Nakamura,
H. Nakayama,
C. Niebuhr,
A. Novosel,
G. Rizzo,
S. Y. Ryu,
L. Santelj,
X. D. Shi,
S. Stefkova,
H. Tanigawa,
N. Taniguchi,
S. E. Vahsen,
L. Vitale,
Z. Wang
Abstract:
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $\rm 50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model (BSM). SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reac…
▽ More
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $\rm 50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model (BSM). SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak luminosity of $\rm 6.3 \times 10^{35}~cm^{-2}s^{-1}$ by further increasing the beam currents and reducing the beam-size at the interaction point by squeezing the betatron function down to $β^{*}_{\rm y}=\rm 0.3~mm$. Beam backgrounds are a key challenge in this context. We estimate the expected background evolution in the next ten years and discuss potential challenges and background mitigation strategies. We find that backgrounds will remain high but acceptable until a luminosity of at least $\rm 2.8\times 10^{35}~cm^{-2}s^{-1}$ is reached at $β^{*}_{\rm y}=\rm 0.6~mm$. Beyond this luminosity, predictions are highly uncertain, owing to a planned redesign of the interaction region. Improved background estimates with reduced uncertainties for the final, maximum-luminosity operation will require completion of this redesign.
△ Less
Submitted 7 August, 2022; v1 submitted 10 March, 2022;
originally announced March 2022.
-
SPring-8 LEPS2 beamline: A facility to produce a multi-GeV photon beam via laser Compton scattering
Authors:
N. Muramatsu,
M. Yosoi,
T. Yorita,
Y. Ohashi,
J. K. Ahn,
S. Ajimura,
Y. Asano,
W. C. Chang,
J. Y. Chen,
S. Date,
T. Gogami,
H. Hamano,
T. Hashimoto,
T. Hiraiwa,
T. Hotta,
T. Ishikawa,
Y. Kasamatsu,
H. Katsuragawa,
R. Kobayakawa,
H. Kohri,
S. Masumoto,
Y. Matsumura,
M. Miyabe,
K. Mizutani,
Y. Morino
, et al. (26 additional authors not shown)
Abstract:
We have constructed a new laser-Compton-scattering facility, called the LEPS2 beamline, at the 8-GeV electron storage ring, SPring-8. This facility provides a linearly polarized photon beam in a tagged energy range of 1.3--2.4 GeV. Thanks to a small divergence of the low-emittance storage-ring electrons, the tagged photon beam has a size (sigma) suppressed to about 4 mm even after it travels about…
▽ More
We have constructed a new laser-Compton-scattering facility, called the LEPS2 beamline, at the 8-GeV electron storage ring, SPring-8. This facility provides a linearly polarized photon beam in a tagged energy range of 1.3--2.4 GeV. Thanks to a small divergence of the low-emittance storage-ring electrons, the tagged photon beam has a size (sigma) suppressed to about 4 mm even after it travels about 130 m to the experimental building that is independent of the storage ring building and contains large detector systems. This beamline is designed to achieve a photon beam intensity higher than that of the first laser-Compton-scattering beamline at SPring-8 by adopting the simultaneous injection of up to four high-power laser beams and increasing a transmittance for the long photon-beam path up to about 77%. The new beamline is under operation for hadron photoproduction experiments.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
A combined experimental/numerical study on the scaling of impact strength and toughness in composite laminates for ballistic applications
Authors:
Stefano Signetti,
Federico Bosia,
Seunghwa Ryu,
Nicola M. Pugno
Abstract:
In this paper, the impact behaviour of composite laminates is investigated, and their potential for ballistic protection assessed, as a function of the reinforcing materials and structures for three representative fibre-reinforced epoxy systems involving carbon, glass, or para-aramid fibre reinforcements, respectively. A multiscale coupled experimental/numerical study on the composite material pro…
▽ More
In this paper, the impact behaviour of composite laminates is investigated, and their potential for ballistic protection assessed, as a function of the reinforcing materials and structures for three representative fibre-reinforced epoxy systems involving carbon, glass, or para-aramid fibre reinforcements, respectively. A multiscale coupled experimental/numerical study on the composite material properties is performed, starting from single fibre, to fibre bundles (yarns), to single composite ply, and finally at laminate level. Uniaxial tensile tests on single fibres and fibre bundles are performed, and the results are used as input for non-linear Finite Element Method (FEM) models for tensile and impact simulation on the composite laminates. Mechanical properties and energy dissipation of the single ply and multilayer laminates under quasi-static loading are preliminarily assessed starting from the mechanical properties of the constituents and subsequently verified numerically. FEM simulations of ballistic impact on multilayer armours are then performed, assessing the three different composites, showing good agreement with experimental tests in terms of impact energy absorption capabilities and deformation/failure behaviour. As result, a generalized multiscale version of the well-known Cuniff criterion is provided as a scaling law, which allows to assess the ballistic performance of laminated composites, starting from the tensile mechanical properties of the fibres and fibre bundles and their volume fraction. The presented multiscale coupled experimental-numerical characterization confirms the reliability of the predictions for full-scale laminate properties starting from the individual constituents at the single fibre scale.
△ Less
Submitted 30 September, 2021; v1 submitted 25 September, 2021;
originally announced September 2021.
-
Redox and Molecular Diffusion in 2D van der Waals Space
Authors:
Haneul Kang,
Kwanghee Park,
Sunmin Ryu
Abstract:
Understanding charge transfer (CT) between two chemical entities and subsequent change in their charge densities is essential not only for molecular species but also for various low-dimensional materials. Because of their extremely high fraction of surface atoms, two-dimensional (2-D) materials are most susceptible to charge exchange and exhibit drastically different physicochemical properties dep…
▽ More
Understanding charge transfer (CT) between two chemical entities and subsequent change in their charge densities is essential not only for molecular species but also for various low-dimensional materials. Because of their extremely high fraction of surface atoms, two-dimensional (2-D) materials are most susceptible to charge exchange and exhibit drastically different physicochemical properties depending on their charge density. In this regard, spontaneous and uncontrollable ionization of graphene in the ambient air has caused much confusion and technical difficulty in achieving experimental reproducibility since its first report in 2004. Moreover, the same ambient hole do** was soon observed in 2-D semiconductors, which implied that a common mechanism should be operative and apply to other low-dimensional materials universally. In this Account, we review our breakthroughs in unraveling the chemical origin and mechanistic requirements of the hidden CT reactions using 2-D crystals. We developed in-situ optical methods to quantify charge density using Raman and photoluminescence (PL) spectroscopy and imaging. Using gas and temperature-controlled in-situ measurements, we revealed that the electrical holes are injected by the oxygen reduction reaction (ORR): $O_{2}$ + $4H^{+}$ + $4e^{-}$ $\rightleftharpoons$ $2H_{2}O$, which was independently verified by pH dependence in HCl solutions. In addition to oxygen and water vapor, the overall CT reaction requires hydrophilic dielectric substrates, which assist hydration of the sample-substrate interface. The interface-localized reaction allowed us to visualized and control interfacial molecular diffusion and CT by varing the 2-D gap spacing and introducing defects. The complete mechanism of the fundamental charge exchange summarized in this Account will be essential in exploring material and device properties of other low dimensional materials.
△ Less
Submitted 2 August, 2021; v1 submitted 30 July, 2021;
originally announced August 2021.
-
Optical Imaging of Chemically and Geometrically Controlled Interfacial Diffusion and Redox in 2D van der Waals Space
Authors:
Haneul Kang,
Sunmin Ryu
Abstract:
Molecular motions and chemical reactions occurring in constrained space play key roles in many catalysis and energy storage applications. However, its understanding has been impeded by difficulty in detection and lack of reliable model systems. In this work, we report geometric and chemical manipulation of O2 diffusion and ensuing O2-mediated charge transfer (CT) that occur in the 2D space between…
▽ More
Molecular motions and chemical reactions occurring in constrained space play key roles in many catalysis and energy storage applications. However, its understanding has been impeded by difficulty in detection and lack of reliable model systems. In this work, we report geometric and chemical manipulation of O2 diffusion and ensuing O2-mediated charge transfer (CT) that occur in the 2D space between single-layer transition metal dichalcogenides (TMDs) and dielectric substrates. As a sensitive real-time wide-field imaging signal, charge-density-dependent photoluminescence (PL) from TMDs was used. The two sequential processes inducing spatiotemporal PL change could be drastically accelerated by increasing the interfacial gap size or introducing artificial defects serving as CT reaction centers. We also show that widely varying CT kinetics of four TMDs are rate-determined by the degree of hydration required for the reactions. The reported findings will be instrumental in designing novel functional nanostructures and devices.
△ Less
Submitted 10 July, 2021; v1 submitted 30 March, 2021;
originally announced March 2021.
-
Optically Facet-Resolved Reaction Anisotropy in Two-Dimensional Transition Metal Dichalcogenides
Authors:
Myeongin Song,
Haneul Kang,
Dan Rhodes,
Bumho Kim,
James Hone,
Sunmin Ryu
Abstract:
Quantifying anisotropy in the chemical reactions of mesoscopic crystals has mostly resorted on the combination of electron microscopy and diffraction. In this work, we established crystal-facet-resolved kinetic measurements of oxidation reactions in 2D transition metal dichalcogenides (TMDs) using optical second-harmonic generation spectroscopy and scanning probe microscopy. We show the in-plane a…
▽ More
Quantifying anisotropy in the chemical reactions of mesoscopic crystals has mostly resorted on the combination of electron microscopy and diffraction. In this work, we established crystal-facet-resolved kinetic measurements of oxidation reactions in 2D transition metal dichalcogenides (TMDs) using optical second-harmonic generation spectroscopy and scanning probe microscopy. We show the in-plane anisotropy of their bond-breaking reactions is governed by their structure and strongly material-dependent among four TMDs. The facet-resolved analysis directly revealed that the reactions proceed fastest (slowest) for chalcogen (metal)-terminated zigzag edges with armchair edges in the middle. The degree of the anisotropy inducing trigonal oxidation patterns was much higher in MoS2 and MoSe2 than WS2 and WSe2. Kinetic Wulff construction based on edge-specific reaction rates verified the material-dependent mesoscopic reaction patterns. We also show that the reactions are initiated at substrate-mediated defects located on the bottom and top surfaces of 2D TMDs.
△ Less
Submitted 16 July, 2021; v1 submitted 7 January, 2021;
originally announced January 2021.
-
Topological Field Theory of Non-Hermitian Systems
Authors:
Kohei Kawabata,
Ken Shiozaki,
Shinsei Ryu
Abstract:
Non-Hermiticity gives rise to unique topological phases without Hermitian analogs. However, the effective field theory has yet to be established. Here, we develop a field-theoretical description of the intrinsic non-Hermitian topological phases. Because of the dissipative and nonequilibrium nature of non-Hermiticity, our theory is formulated solely in terms of spatial degrees of freedom, which con…
▽ More
Non-Hermiticity gives rise to unique topological phases without Hermitian analogs. However, the effective field theory has yet to be established. Here, we develop a field-theoretical description of the intrinsic non-Hermitian topological phases. Because of the dissipative and nonequilibrium nature of non-Hermiticity, our theory is formulated solely in terms of spatial degrees of freedom, which contrasts with the conventional theory defined in spacetime. It provides the universal understanding about non-Hermitian topological phenomena, such as the unidirectional transport in one dimension and the chiral magnetic skin effect in three dimensions. Furthermore, it systematically predicts new physics; we illustrate this by revealing transport phenomena and skin effects in two dimensions induced by a perpendicular spatial texture. From the field-theoretical perspective, the non-Hermitian skin effect, which is anomalous localization due to non-Hermiticity, is shown to be a signature of an anomaly.
△ Less
Submitted 15 February, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
Polarized Raman Spectra and Complex Raman Tensors of Antiferromagnetic Semiconductor CrPS4
Authors:
Su** Kim,
**hwan Lee,
Changgu Lee,
Sunmin Ryu
Abstract:
Chromium thiophosphate (CrPS4), a monoclinic crystal of C_2^3 space group, is a ternary layered semiconductor with an optical bandgap of 1.4 eV and exhibits antiferromagnetism below 36 K. Despite its potential in optoelectronic and magnetic applications, the symmetry of its lattice vibrations has not been systematically studied. In this work, we performed a polarized Raman spectroscopy of bulk CrP…
▽ More
Chromium thiophosphate (CrPS4), a monoclinic crystal of C_2^3 space group, is a ternary layered semiconductor with an optical bandgap of 1.4 eV and exhibits antiferromagnetism below 36 K. Despite its potential in optoelectronic and magnetic applications, the symmetry of its lattice vibrations has not been systematically studied. In this work, we performed a polarized Raman spectroscopy of bulk CrPS4 using three different excitation wavelengths of 457, 514, and 633 nm. High-quality crystals grown by the chemical vapor transport method were mechanically exfoliated or polished to expose three orthogonal crystallographic facets. Polarized Raman spectra were obtained in parallel and cross configurations by rotating samples about the surface normal to each of the facets. Among 33 Raman active modes (16 A and 17 B) at the Brillouin zone center, 19 (8) peaks observed in the parallel (cross) configuration were assigned as A (B) modes. Complex-valued Raman tensors were determined for 7 major A modes using the angle-dependent Raman spectra of the three facets. The results can also be used in determining the crystallographic orientations of CrPS4 unequivocally.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
A Silicon Beam Tracker
Authors:
J. H. Han,
H. S. Ahn,
J. B. Bae,
H. J. Hyun,
S. W. Jung,
D. H. Kah,
C. H. Kim,
H. J. Kim,
K. C. Kim,
M. H. Lee,
L. Lutz,
A. Malinin,
H. Park,
S. Ryu,
E. S. Seo,
P. Walpole,
J. Wu,
J. H. Yoo,
Y. S. Yoon,
S. Y. Zinn
Abstract:
When testing and calibrating particle detectors in a test beam, accurate tracking information independent of the detector being tested is extremely useful during the offline analysis of the data. A general-purpose Silicon Beam Tracker (SBT) was constructed with an active area of 32.0 x 32.0 mm2 to provide this capability for the beam calibration of the Cosmic Ray Energetics And Mass (CREAM) calori…
▽ More
When testing and calibrating particle detectors in a test beam, accurate tracking information independent of the detector being tested is extremely useful during the offline analysis of the data. A general-purpose Silicon Beam Tracker (SBT) was constructed with an active area of 32.0 x 32.0 mm2 to provide this capability for the beam calibration of the Cosmic Ray Energetics And Mass (CREAM) calorimeter. The tracker consists of two modules, each comprised of two orthogonal layers of 380 μm thick silicon strip sensors. In one module each layer is a 64-channel AC-coupled single-sided silicon strip detector (SSD) with a 0.5 mm pitch. In the other, each layer is a 32-channel DC-coupled single-sided SSD with a 1.0 mm pitch. The signals from the 4 layers are read out using modified CREAM hodoscope front-end electronics with a USB 2.0 interface board to a Linux DAQ PC. In this paper, we present the construction of the SBT, along with its performance in radioactive source tests and in a CERN beam test in October 2006.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
On-Stack Two-Dimensional Conversion of MoS2 into MoO3
Authors:
Taeg Yeoung Ko,
Areum Jeong,
Wontaek Kim,
**hwan Lee,
Youngchan Kim,
Jung Eun Lee,
Gyeong Hee Ryu,
Kwanghee Park,
Dogyeong Kim,
Zonghoon Lee,
Min Hyung Lee,
Changgu Lee,
Sunmin Ryu
Abstract:
Chemical transformation of existing two-dimensional (2D) materials can be crucial in further expanding the 2D crystal palette required to realize various functional heterostructures. In this work, we demonstrate a 2D 'on-stack' chemical conversion of single-layer crystalline MoS2 into MoO3 with a precise layer control that enables truly 2D MoO3 and MoO3/MoS2 heterostructures. To minimize perturbat…
▽ More
Chemical transformation of existing two-dimensional (2D) materials can be crucial in further expanding the 2D crystal palette required to realize various functional heterostructures. In this work, we demonstrate a 2D 'on-stack' chemical conversion of single-layer crystalline MoS2 into MoO3 with a precise layer control that enables truly 2D MoO3 and MoO3/MoS2 heterostructures. To minimize perturbation of the 2D morphology, a nonthermal oxidation using O2 plasma was employed. The early stage of the reaction was characterized by a defect-induced Raman peak, drastic quenching of photoluminescence (PL) signals and sub-nm protrusions in atomic force microscopy images. As the reaction proceeded from the uppermost layer to the buried layers, PL and optical second harmonic generation signals showed characteristic modulations revealing a layer-by-layer conversion. The plasma-generated 2D oxides, confirmed as MoO3 by x-ray photoelectron spectroscopy, were found to be amorphous but extremely flat with a surface roughness of 0.18 nm, comparable to that of 1L MoS2. The rate of oxidation quantified by Raman spectroscopy decreased very rapidly for buried sulfide layers due to protection by the surface 2D oxides, exhibiting a pseudo-self-limiting behavior. As exemplified in this work, various on-stack chemical transformations can be applied to other 2D materials in forming otherwise unobtainable materials and complex heterostructures, thus expanding the palette of 2D material building blocks.
△ Less
Submitted 10 August, 2020;
originally announced August 2020.
-
Redox-Governed Charge Do** Dictated by Interfacial Diffusion in Two-Dimensional Materials
Authors:
Kwanghee Park,
Haneul Kang,
Seonghyun Koo,
DaeEung Lee,
Sunmin Ryu
Abstract:
Controlling extra charge carriers is pivotal in manipulating electronic, optical, and magnetic properties of various two-dimensional (2D) materials. Nonetheless, the ubiquitous hole do** of 2D materials in the air and acids has been controversial in its mechanistic details. Here we show their common origin is an electrochemical reaction driven by redox couples of oxygen and water molecules. Usin…
▽ More
Controlling extra charge carriers is pivotal in manipulating electronic, optical, and magnetic properties of various two-dimensional (2D) materials. Nonetheless, the ubiquitous hole do** of 2D materials in the air and acids has been controversial in its mechanistic details. Here we show their common origin is an electrochemical reaction driven by redox couples of oxygen and water molecules. Using real-time photoluminescence imaging of WS2 and Raman spectroscopy of graphene, we capture molecular diffusion through the 2D nanoscopic space between 2D materials and hydrophilic substrates, and show that the latter accommodate water molecules also serving as a hydrating solvent. We also demonstrate that HCl-induced do** is governed by dissolved O2 and pH in accordance with the Nernst equation. The nanoscopic electrochemistry anatomized in this work sets an ambient limit to material properties, which is universal to not only 2D but also other forms of materials.
△ Less
Submitted 6 August, 2020;
originally announced August 2020.
-
Crossover between Photochemical and Photothermal Oxidations of Atomically Thin Magnetic Semiconductor CrPS4
Authors:
Suhyeon Kim,
**hwan Lee,
Gangtae **,
Moon-Ho Jo,
Changgu Lee,
Sunmin Ryu
Abstract:
Many two-dimensional (2D) semiconductors represented by transition metal dichalcogenides have tunable optical bandgaps in the visible or near IR-range standing as a promising candidate for optoelectronic devices. Despite this potential, however, their photoreactions are not well understood or controversial in the mechanistic details. In this work, we report a unique thickness-dependent photoreacti…
▽ More
Many two-dimensional (2D) semiconductors represented by transition metal dichalcogenides have tunable optical bandgaps in the visible or near IR-range standing as a promising candidate for optoelectronic devices. Despite this potential, however, their photoreactions are not well understood or controversial in the mechanistic details. In this work, we report a unique thickness-dependent photoreaction sensitivity and a switchover between two competing reaction mechanisms in atomically thin chromium thiophosphate (CrPS4), a two-dimensional antiferromagnetic semiconductor. CrPS4 showed a threshold power density 2 orders of magnitude smaller than that for MoS2 obeying a photothermal reaction route. In addition, reaction cross section quantified with Raman spectroscopy revealed distinctive power dependences in the low and high power regimes. On the basis of optical in situ thermometric measurements and control experiments against O2, water, and photon energy, we proposed a photochemical oxidation mechanism involving singlet O2 in the low power regime with a photothermal route for the other. We also demonstrated a highly effective encapsulation with Al2O3 as a protection against the destructive photoinduced and ambient oxidations.
△ Less
Submitted 6 August, 2020;
originally announced August 2020.
-
Structural and optical properties of single- and few-layer magnetic semiconductor CrPS4
Authors:
**hwan Lee,
Taeg Yeoung Ko,
Jung Hwa Kim,
Hunyoung Bark,
Byunggil Kang,
Soon-Gil Jung,
Tuson Park,
Zonghoon Lee,
Sunmin Ryu,
Changgu Lee
Abstract:
Atomically thin binary 2-dimensional (2D) semiconductors exhibit diverse physical properties depending on their composition, structure and thickness. By adding another element in those materials, which will lead to formation of ternary 2D materials, the property and structure would greatly change and significantly expanded applications could be explored. In this work, we report structural and opti…
▽ More
Atomically thin binary 2-dimensional (2D) semiconductors exhibit diverse physical properties depending on their composition, structure and thickness. By adding another element in those materials, which will lead to formation of ternary 2D materials, the property and structure would greatly change and significantly expanded applications could be explored. In this work, we report structural and optical properties of atomically thin chromium thiophosphate (CrPS4), a ternary antiferromagnetic semiconductor. Its structural details were revealed by X-ray and electron diffractions. Transmission electron microscopy showed that preferentially-cleaved edges are parallel to diagonal Cr atom rows, which readily identified their crystallographic orientations. Strong in-plane optical anisotropy induced birefringence that also enabled efficient determination of crystallographic orientation using polarized microscopy. The lattice vibrations were probed by Raman spectroscopy for the first time and exhibited significant dependence on thickness of crystals exfoliated down to single layer. Optical absorption determined by reflectance contrast was dominated by d-d type transitions localized at Cr3+ ions, which was also responsible for the major photoluminescence peak at 1.31 eV. The spectral features in the absorption and emission spectra exhibited noticeable thickness-dependence and hinted a high photochemical activity for single layer CrPS4. The current structural and optical investigation will provide a firm basis for future study and application of this novel magnetic semiconductor.
△ Less
Submitted 6 August, 2020;
originally announced August 2020.
-
How and When the Cassie-Baxter Droplet Starts to Slide on the Textured Surfaces
Authors:
Donggyu Kim,
Seunghwa Ryu
Abstract:
The Cassie-Baxter state droplet has many local energy minima on the textured surface, while the amount of the energy barrier between them can be affected by the gravity. When the droplet cannot find any local energy minimum point on the surface, the droplet starts to slide. Based on the Laplace pressure equation, the shape of a two-dimensional Cassie-Baxter droplet on a textured surface is predict…
▽ More
The Cassie-Baxter state droplet has many local energy minima on the textured surface, while the amount of the energy barrier between them can be affected by the gravity. When the droplet cannot find any local energy minimum point on the surface, the droplet starts to slide. Based on the Laplace pressure equation, the shape of a two-dimensional Cassie-Baxter droplet on a textured surface is predicted. Then the stability of the droplet is examined by considering the interference between the liquid and the surface microstructure as well as analyzing the free energy change upon the de-pinning. Afterward, the theoretical analysis is validated against the line-tension based front tracking method simulation (LTM), that seamlessly captures the attachment and detachment between the liquid and the substrate. We answer to the open debates on the sliding research field: (i) Whether the sliding initiates with the front end slip or the rear end slip, and (ii) whether the advancing and receding contact angles measured on the horizontal surface are comparable with the front and rear contact angle of the droplet at the onset of sliding. Additionally, a new droplet translation mechanism promoted by cycle of condensation and evaporation is suggested.
△ Less
Submitted 23 June, 2020;
originally announced July 2020.
-
Highly ordered lead-free double perovskite halides by design
Authors:
Chang Won Ahn,
Jae Hun Jo,
Jong Chan Kim,
Hamid Ullah,
Sangkyun Ryu,
Younghun Hwang,
** San Choi,
Jongmin Lee,
Sanghan Lee,
Hyoungjeen Jeen,
Young-Han Shin,
Hu Young Jeong,
Ill Won Kim,
Tae Heon Kim
Abstract:
Lead-free double perovskite halides are emerging optoelectronic materials that are alternatives to lead-based perovskite halides. Recently, single-crystalline double perovskite halides were synthesized, and their intriguing functional properties were demonstrated. Despite such pioneering works, lead-free double perovskite halides with better crystallinity are still in demand for applications to no…
▽ More
Lead-free double perovskite halides are emerging optoelectronic materials that are alternatives to lead-based perovskite halides. Recently, single-crystalline double perovskite halides were synthesized, and their intriguing functional properties were demonstrated. Despite such pioneering works, lead-free double perovskite halides with better crystallinity are still in demand for applications to novel optoelectronic devices. Here, we realized highly crystalline Cs2AgBiBr6 single crystals with a well-defined atomic ordering on the microscopic scale. We avoided the formation of Ag vacancies and the subsequent secondary Cs3Bi2Br9 by manipulating the initial chemical environments in hydrothermal synthesis. The suppression of Ag vacancies allows us to reduce the trap density in the as-grown crystals and to enhance the carrier mobility further. Our design strategy is applicable for fabricating other lead-free halide materials with high crystallinity.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Nonunitary Scaling Theory of Non-Hermitian Localization
Authors:
Kohei Kawabata,
Shinsei Ryu
Abstract:
Non-Hermiticity can destroy Anderson localization and lead to delocalization even in one dimension. However, the unified understanding of the non-Hermitian delocalization has yet to be established. Here, we develop a scaling theory of localization in non-Hermitian systems. We reveal that non-Hermiticity introduces a new scale and breaks down the one-parameter scaling, which is the central assumpti…
▽ More
Non-Hermiticity can destroy Anderson localization and lead to delocalization even in one dimension. However, the unified understanding of the non-Hermitian delocalization has yet to be established. Here, we develop a scaling theory of localization in non-Hermitian systems. We reveal that non-Hermiticity introduces a new scale and breaks down the one-parameter scaling, which is the central assumption of the conventional scaling theory of localization. Instead, we identify the origin of the unconventional non-Hermitian delocalization as the two-parameter scaling. Furthermore, we establish the threefold universality of non-Hermitian localization based on reciprocity; reciprocity forbids the delocalization without internal degrees of freedom, whereas symplectic reciprocity results in a new type of symmetry-protected delocalization.
△ Less
Submitted 22 April, 2021; v1 submitted 1 May, 2020;
originally announced May 2020.
-
Molecular Generative Model Based On Adversarially Regularized Autoencoder
Authors:
Seung Hwan Hong,
Jaechang Lim,
Seongok Ryu,
Woo Youn Kim
Abstract:
Deep generative models are attracting great attention as a new promising approach for molecular design. All models reported so far are based on either variational autoencoder (VAE) or generative adversarial network (GAN). Here we propose a new type model based on an adversarially regularized autoencoder (ARAE). It basically uses latent variables like VAE, but the distribution of the latent variabl…
▽ More
Deep generative models are attracting great attention as a new promising approach for molecular design. All models reported so far are based on either variational autoencoder (VAE) or generative adversarial network (GAN). Here we propose a new type model based on an adversarially regularized autoencoder (ARAE). It basically uses latent variables like VAE, but the distribution of the latent variables is obtained by adversarial training like in GAN. The latter is intended to avoid both inappropriate approximation of posterior distribution in VAE and difficulty in handling discrete variables in GAN. Our benchmark study showed that ARAE indeed outperformed conventional models in terms of validity, uniqueness, and novelty per generated molecule. We also demonstrated successful conditional generation of drug-like molecules with ARAE for both cases of single and multiple properties control. As a potential real-world application, we could generate EGFR inhibitors sharing the scaffolds of known active molecules while satisfying drug-like conditions simultaneously.
△ Less
Submitted 12 November, 2019;
originally announced December 2019.
-
Uncertainty quantification of molecular property prediction using Bayesian neural network models
Authors:
Seongok Ryu,
Yongchan Kwon,
Woo Youn Kim
Abstract:
In chemistry, deep neural network models have been increasingly utilized in a variety of applications such as molecular property predictions, novel molecule designs, and planning chemical reactions. Despite the rapid increase in the use of state-of-the-art models and algorithms, deep neural network models often produce poor predictions in real applications because model performance is highly depen…
▽ More
In chemistry, deep neural network models have been increasingly utilized in a variety of applications such as molecular property predictions, novel molecule designs, and planning chemical reactions. Despite the rapid increase in the use of state-of-the-art models and algorithms, deep neural network models often produce poor predictions in real applications because model performance is highly dependent on the quality of training data. In the field of molecular analysis, data are mostly obtained from either complicated chemical experiments or approximate mathematical equations, and then quality of data may be questioned.In this paper, we quantify uncertainties of prediction using Bayesian neural networks in molecular property predictions. We estimate both model-driven and data-driven uncertainties, demonstrating the usefulness of uncertainty quantification as both a quality checker and a confidence indicator with the three experiments. Our results manifest that uncertainty quantification is necessary for more reliable molecular applications and Bayesian neural network models can be a practical approach.
△ Less
Submitted 18 November, 2018;
originally announced May 2019.
-
Importance of local exact exchange potential in hybrid functionals for accurate excited states
Authors:
Jaewook Kim,
Kwangwoo Hong,
Sang-Yeon Hwang,
Seongok Ryu,
Sunghwan Choi,
Woo Youn Kim
Abstract:
Density functional theory has been an essential analysis tool for both theoretical and experimental chemists since accurate hybrid functionals were developed. Here we propose a local hybrid method derived from the optimized effective potential (OEP) method and compare its distinct features with conventional nonlocal ones from the Hartree-Fock (HF) exchange operator. Both are formally exact for gro…
▽ More
Density functional theory has been an essential analysis tool for both theoretical and experimental chemists since accurate hybrid functionals were developed. Here we propose a local hybrid method derived from the optimized effective potential (OEP) method and compare its distinct features with conventional nonlocal ones from the Hartree-Fock (HF) exchange operator. Both are formally exact for ground states and thus show similar accuracy for atomization energies and reaction barrier heights. For excited states, the local version yields virtual orbitals with N-electron character, while those of the nonlocal version have mixed characters between N- and (N+1)-electron orbitals. As a result, the orbital energy gaps from the former well approximate excitation energies with a small mean absolute error (MAE = 0.40 eV) for the Caricato benchmark set. The correction from time-dependent density functional theory with a simple local density approximation kernel further improves its accuracy by incorporating multi-configurational effects, resulting in the total MAE of 0.27 eV that outperforms conventional functionals except for MN15.
△ Less
Submitted 28 October, 2016;
originally announced October 2016.
-
Wetting theory for small droplets on textured solid surfaces
Authors:
Donggyu Kim,
Nicola M. Pugno,
Seunghwa Ryu
Abstract:
Conventional wetting theories on rough surfaces with Wenzel, Cassie-Baxter, and Penetrate modes suggest the possibility of tuning the contact angle by adjusting the surface texture. Despite decades of intensive study, there are still many experimental results that are not well understood because conventional wetting theory, which assume an infinite droplet size, has been used to explain measuremen…
▽ More
Conventional wetting theories on rough surfaces with Wenzel, Cassie-Baxter, and Penetrate modes suggest the possibility of tuning the contact angle by adjusting the surface texture. Despite decades of intensive study, there are still many experimental results that are not well understood because conventional wetting theory, which assume an infinite droplet size, has been used to explain measurements of finite-sized droplets. In this study, we suggest a wetting theory that is applicable to any droplet size based on the free energy landscape analysis of various wetting modes of finite-sized droplets on a 2D textured surface. The key finding of our study is that there are many quantized wetting angles with local free energy minima; the implication of this is remarkable. We find that the conventional theories can predict the contact angle at the global free energy minimum if the droplet size is 40 times or larger than the characteristic scale of the surface roughness. Furthermore, we confirm that the pinning origin is the local free energy minima and obtain the energy barriers of pinning as a function of geometric factors. We validate our theory against experimental results on an anisotropic rough surface. In addition, we discuss wetting on a non-uniform rough surface with a rough central region and flat edge. Our findings clarify the extent to which the conventional wetting theory is valid and expand the physical understanding of wetting phenomena of small liquid drops on rough surfaces.
△ Less
Submitted 2 May, 2016;
originally announced May 2016.
-
Resolving coiled shapes reveals new reorientation behaviors in C. elegans
Authors:
Onno D Broekmans,
Jarlath B Rodgers,
William S Ryu,
Greg J Stephens
Abstract:
We exploit the reduced space of C. elegans postures to develop a novel tracking algorithm which captures both simple shapes and also self-occluding coils, an important, yet unexplored, component of worm behavior. We apply our algorithm to show that visually complex, coiled sequences are a superposition of two simpler patterns: the body wave dynamics and a head-curvature pulse. We demonstrate the p…
▽ More
We exploit the reduced space of C. elegans postures to develop a novel tracking algorithm which captures both simple shapes and also self-occluding coils, an important, yet unexplored, component of worm behavior. We apply our algorithm to show that visually complex, coiled sequences are a superposition of two simpler patterns: the body wave dynamics and a head-curvature pulse. We demonstrate the precise coiled dynamics of an escape response and uncover new behaviors in spontaneous, large amplitude coils; deep reorientations occur through classical Omega-shaped postures and also through larger, new postural excitations which we label here as delta-turns. We find that omega and delta turns occur independently, the serpentine analog of a random left-right step, suggesting a distinct triggering mechanism. We also show that omega and delta turns display approximately equal rates and adapt to food-free conditions on a similar timescale, a simple strategy to avoid navigational bias.
△ Less
Submitted 13 March, 2016;
originally announced March 2016.
-
A novel application of Fiber Bragg Grating (FBG) sensors in MPGD
Authors:
D. Abbaneo,
M. Abbas,
M. Abbrescia,
A. A. Abdelalim,
M. Abi Akl,
O. Aboamer,
D. Acosta,
A. Ahmad,
W. Ahmed,
W. Ahmed,
A. Aleksandrov,
R. Aly,
P. Altieri,
C. Asawatangtrakuldee,
P. Aspell,
Y. Assran,
I. Awan,
S. Bally,
Y. Ban,
S. Banerjee,
V. Barashko,
P. Barria,
G. Bencze,
N. Beni,
L. Benussi
, et al. (133 additional authors not shown)
Abstract:
We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active are…
▽ More
We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements in material studies. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide GEM foils of the GE1/1 chambers. A network of FBG sensors have been used to determine the optimal mechanical tension applied and to characterise the mechanical tension that should be applied to the foils. We discuss the results of the test done on a full-sized GE1/1 final prototype, the studies done to fully characterise the GEM material, how this information was used to define a standard assembly procedure and possible future developments.
△ Less
Submitted 28 December, 2015;
originally announced December 2015.
-
Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors
Authors:
D. Abbaneo,
M. Abbas,
M. Abbrescia,
A. A. Abdelalim,
M. Abi Akl,
O. Aboamer,
D. Acosta,
A. Ahmad,
W. Ahmed,
W. Ahmed,
A. Aleksandrov,
R. Aly,
P. Altieri,
C. Asawatangtrakuldee,
P. Aspell,
Y. Assran,
I. Awan,
S. Bally,
Y. Ban,
S. Banerjee,
V. Barashko,
P. Barria,
G. Bencze,
N. Beni,
L. Benussi
, et al. (133 additional authors not shown)
Abstract:
A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.
A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.
△ Less
Submitted 28 December, 2015;
originally announced December 2015.
-
Performance of a Large-Area GEM Detector Prototype for the Upgrade of the CMS Muon Endcap System
Authors:
D. Abbaneo,
M. Abbas,
M. Abbrescia,
A. A. Abdelalim,
M. Abi Akl,
W. Ahmed,
W. Ahmed,
P. Altieri,
R. Aly,
C. Asawatangtrakuldee,
A. Ashfaq,
P. Aspell,
Y. Assran,
I. Awan,
S. Bally,
Y. Ban,
S. Banerjee,
P. Barria,
L. Benussi,
V. Bhopatkar,
S. Bianco,
J. Bos,
O. Bouhali,
S. Braibant,
S. Buontempo
, et al. (113 additional authors not shown)
Abstract:
Gas Electron Multiplier (GEM) technology is being considered for the forward muon upgrade of the CMS experiment in Phase 2 of the CERN LHC. Its first implementation is planned for the GE1/1 system in the $1.5 < \midη\mid < 2.2$ region of the muon endcap mainly to control muon level-1 trigger rates after the second long LHC shutdown. A GE1/1 triple-GEM detector is read out by 3,072 radial strips wi…
▽ More
Gas Electron Multiplier (GEM) technology is being considered for the forward muon upgrade of the CMS experiment in Phase 2 of the CERN LHC. Its first implementation is planned for the GE1/1 system in the $1.5 < \midη\mid < 2.2$ region of the muon endcap mainly to control muon level-1 trigger rates after the second long LHC shutdown. A GE1/1 triple-GEM detector is read out by 3,072 radial strips with 455 $μ$rad pitch arranged in eight $η$-sectors. We assembled a full-size GE1/1 prototype of 1m length at Florida Tech and tested it in 20-120 GeV hadron beams at Fermilab using Ar/CO$_{2}$ 70:30 and the RD51 scalable readout system. Four small GEM detectors with 2-D readout and an average measured azimuthal resolution of 36 $μ$rad provided precise reference tracks. Construction of this largest GEM detector built to-date is described. Strip cluster parameters, detection efficiency, and spatial resolution are studied with position and high voltage scans. The plateau detection efficiency is [97.1 $\pm$ 0.2 (stat)]\%. The azimuthal resolution is found to be [123.5 $\pm$ 1.6 (stat)] $μ$rad when operating in the center of the efficiency plateau and using full pulse height information. The resolution can be slightly improved by $\sim$ 10 $μ$rad when correcting for the bias due to discrete readout strips. The CMS upgrade design calls for readout electronics with binary hit output. When strip clusters are formed correspondingly without charge-weighting and with fixed hit thresholds, a position resolution of [136.8 $\pm$ 2.5 stat] $μ$rad is measured, consistent with the expected resolution of strip-pitch/$\sqrt{12}$ = 131.3 $μ$rad. Other $η$-sectors of the detector show similar response and performance.
△ Less
Submitted 8 December, 2014; v1 submitted 30 November, 2014;
originally announced December 2014.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
From modes to movement in the behavior of C. elegans
Authors:
Greg J Stephens,
Bethany Johnson-Kerner,
William Bialek,
William S Ryu
Abstract:
Organisms move through the world by changing their shape, and here we explore the map** from shape space to movements in the nematode C. elegans as it crawls on a planar agar surface. We characterize the statistics of the trajectories through the correlation functions of the orientation angular velocity, orientation angle and the mean-squared displacement, and we find that the loss of orientat…
▽ More
Organisms move through the world by changing their shape, and here we explore the map** from shape space to movements in the nematode C. elegans as it crawls on a planar agar surface. We characterize the statistics of the trajectories through the correlation functions of the orientation angular velocity, orientation angle and the mean-squared displacement, and we find that the loss of orientational memory has significant contributions from both abrupt, large amplitude turning events and the continuous dynamics between these events. Further, we demonstrate long-time persistence of orientational memory in the intervals between abrupt turns. Building on recent work demonstrating that C. elegans movements are restricted to a low-dimensional shape space, we construct a map from the dynamics in this shape space to the trajectory of the worm along the agar. We use this connection to illustrate that changes in the continuous dynamics reveal subtle differences in movement strategy that occur among mutants defective in two classes of dopamine receptors.
△ Less
Submitted 23 December, 2009;
originally announced December 2009.
-
Measurement Limits to 134Cs Concentration in Soil
Authors:
J. K. Ahn,
J. S. Kim,
H. M. Lee,
T. H. Kim,
J. N. Park,
Y. S. Kang,
H. S. Lee,
S. J. Kim,
J. Y. Park,
S. Y. Ryu,
H. Ch. Kim,
W. G. Kang,
S. K. Kim
Abstract:
We investigate the caesium concentrations in soils in mountain areas near Gori nuclear power plant in Korea, focusing on the measurement limits to the 134Cs. In order to lower the minimum detectable amount (MDA) of activity for the 134Cs, we have used the ammonium molybdophosphase (AMP) precipitation method to get rid of the 40K existing in natural radioactivity, which reduces the MDA activity abo…
▽ More
We investigate the caesium concentrations in soils in mountain areas near Gori nuclear power plant in Korea, focusing on the measurement limits to the 134Cs. In order to lower the minimum detectable amount (MDA) of activity for the 134Cs, we have used the ammonium molybdophosphase (AMP) precipitation method to get rid of the 40K existing in natural radioactivity, which reduces the MDA activity about ten times smaller than those without the AMP precipitation method. The MDA results for the 134Cs were found to be in the range between 0.015 and 0.044 Bq/kg-dry weight. In order to diminish the background, we also have measured a part of the soil samples in Yangyang, a small town in the east coast of Korea. However, it turns out that in order to detect the 134Cs in the samples the MDA should be reduced to the level of mBq/kg-dry weight.
△ Less
Submitted 22 December, 2011; v1 submitted 10 January, 2009;
originally announced January 2009.
-
Probing Pores Using Elementary Quantum Mechanics
Authors:
Seungoh Ryu
Abstract:
The relaxation of polarized spins in a porous medium has been utilized as a probe of its structure. We note that the governing diffusion problem has a close parallel to that of a particle in a box, an elementary Quantum mechanics toy model. Following the spirits of "free electron" model, we use generic properties of the eigen spectrum to understand features common to a wide variety of pore geome…
▽ More
The relaxation of polarized spins in a porous medium has been utilized as a probe of its structure. We note that the governing diffusion problem has a close parallel to that of a particle in a box, an elementary Quantum mechanics toy model. Following the spirits of "free electron" model, we use generic properties of the eigen spectrum to understand features common to a wide variety of pore geometry, consistent with large scale numerical simulations and experimental data.
△ Less
Submitted 30 October, 2000;
originally announced October 2000.
