Showing 1–50 of 66 results for author: Russo, A

The Belle II Detector Upgrades Framework Conceptual Design Report

Authors: H. Aihara, A. Aloisio, D. P. Auguste, M. Aversano, M. Babeluk, S. Bahinipati, Sw. Banerjee, M. Barbero, J. Baudot, A. Beaubien, F. Becherer, T. Bergauer, F. U. Bernlochner., V. Bertacchi, G. Bertolone, C. Bespin, M. Bessner, S. Bettarini, A. J. Bevan, B. Bhuyan, M. Bona, J. F. Bonis, J. Borah, F. Bosi, R. Boudagga , et al. (186 additional authors not shown)

Abstract: We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive wit… ▽ More We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive with the LHC and other experiments. △ Less

Submitted 4 July, 2024; v1 submitted 26 June, 2024; originally announced June 2024.

Comments: Editor: F. Forti 170 pages

Report number: KEK-REPORT-2024-1, BELLE2-REPORT-2024-042

Enhancing the light yield of He:CF$_4$ based gaseous detector

Authors: F. D. Amaro, R. Antonietti, E. Baracchini, L. Benussi, S. Bianco, R. Campagnola, C. Capoccia, M. Caponero, D. S. Cardoso, L. G. M. de Carvalho, G. Cavoto, I. Abritta Costa, A. Croce, E. Dané, G. Dho, F. Di Giambattista, E. Di Marco, M. D'Astolfo, G. D'Imperio, D. Fiorina, F. Iacoangeli, Z. Islam, H. P. L. Jùnior, E. Kemp, G. Maccarrone , et al. (29 additional authors not shown)

Abstract: The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipp… ▽ More The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipped with an amplification stage made of a stack of three gas electron multipliers (GEMs) which are coupled to an optical readout. The latter consists in scientific CMOS (sCMOS) cameras and photomultipliers tubes (PMTs). The maximisation of the light yield of the amplification stage plays a major role in the determination of the energy threshold of the experiment. In this paper, we simulate the effect of the addition of a strong electric field below the last GEM plane on the GEM field structure and we experimentally test it by means of a 10$\times$10 cm$^2$ readout area prototype. The experimental measurements analyse stacks of different GEMs and helium concentrations in the gas mixture combined with this extra electric field, studying their performances in terms of light yield, energy resolution and intrinsic diffusion. It is found that the use of this additional electric field permits large light yield increases without degrading intrinsic characteristics of the amplification stage with respect to the regular use of GEMs. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Charge Amplification in Low Pressure CF4:SF6:He Mixtures with a Multi-Mesh ThGEM for Directional Dark Matter Searches

Authors: F. D. Amaro, E. Baracchini, L. Benussi, S. Bianco, F. Borra, C. Capoccia, M. Caponero, D. S. Cardoso, G. Cavoto, I. A. Costa, T. Crane, E. Dane, M. DAstolfo, G. Dho, F. Di Giambattista, G. DImperio, E. Di Marco, J. M. F. Dos Santos, A. C. Ezeribe, D. Fiorina, F. Iacoangeli, H. P. Lima Junior, G. S. P. Lopes, G. Maccarrone, R. D. P. Mano , et al. (24 additional authors not shown)

Abstract: The CYGNO collaboration is develo** next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Neg… ▽ More The CYGNO collaboration is develo** next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Negative Ion Drift (NID) gas, reduces charge diffusion leading to improved positional resolution. CF4, although not a NID gas, has also been identified as a favourable gas target as it provides a scintillation signal which can be used for a complimentary light/charge readout approach. These gases can operate at low pressures to elongate Nuclear Recoil (NR) tracks and facilitate directional measurements. In principle, He could be added to low pressure SF6/CF4 without significant detriment to the length of 16S, 12C, and 19F recoils. This would improve the target mass, sensitivity to lower WIMP masses, and offer the possibility of atmospheric operation; potentially reducing the cost of a containment vessel. In this article, we present gas gain and energy resolution measurements, taken with a Multi-Mesh Thick Gaseous Electron Multiplier (MMThGEM), in low pressure SF6 and CF4:SF6 mixtures following the addition of He. We find that the CF4:SF6:He mixtures tested were able to produce gas gains on the order of 10^4 up to a total pressure of 100 Torr. These results demonstrate an order of magnitude improvement in charge amplification in NID gas mixtures with a He component. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: Corresponding Author: A.G. McLean

Status of the production of GEM chambers for the CMS experiment at Large Hadron Collider

Authors: L. Benussi, S. Bianco, R. Campagnola, M. Caponero, S. Colafranceschi, S. Meola, E. Paoletti, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, G. Saviano, R. Tesauro

Abstract: The High Luminosity LHC phase includes an upgrade to the muon stations for the CMS Experiment. CMS trigger and muon identification performance will be crucial, and it is, therefore, necessary to install new GEM stations to extend acceptance in the high-η region. An explanation of the quality control test and an update on the status of production will be provided. The High Luminosity LHC phase includes an upgrade to the muon stations for the CMS Experiment. CMS trigger and muon identification performance will be crucial, and it is, therefore, necessary to install new GEM stations to extend acceptance in the high-η region. An explanation of the quality control test and an update on the status of production will be provided. △ Less

Submitted 28 March, 2024; originally announced April 2024.

Cycle-consistent Generative Adversarial Network Synthetic CT for MR-only Adaptive Radiation Therapy on MR-Linac

Authors: Gabriel L. Asher, Bassem I. Zaki, Gregory A. Russo, Gobind S. Gill, Charles R. Thomas, Temiloluwa O. Prioleau, Rongxiao Zhang, Brady Hunt

Abstract: Purpose: This study assesses the effectiveness of Deep Learning (DL) for creating synthetic CT (sCT) images in MR-guided adaptive radiation therapy (MRgART). Methods: A Cycle-GAN model was trained with MRI and CT scan slices from MR-LINAC treatments, generating sCT volumes. The analysis involved retrospective treatment plan data from patients with various tumors. sCT images were compared with st… ▽ More Purpose: This study assesses the effectiveness of Deep Learning (DL) for creating synthetic CT (sCT) images in MR-guided adaptive radiation therapy (MRgART). Methods: A Cycle-GAN model was trained with MRI and CT scan slices from MR-LINAC treatments, generating sCT volumes. The analysis involved retrospective treatment plan data from patients with various tumors. sCT images were compared with standard CT scans using mean absolute error in Hounsfield Units (HU) and image similarity metrics (SSIM, PSNR, NCC). sCT volumes were integrated into a clinical treatment system for dosimetric re-evaluation. Results: The model, trained on 8405 frames from 57 patients and tested on 357 sCT frames from 17 patients, showed sCTs comparable to dCTs in electron density and structural similarity with MRI scans. The MAE between sCT and dCT was 49.2 +/- 13.2 HU, with sCT NCC exceeding dCT by 0.06, and SSIM and PSNR at 0.97 +/- 0.01 and 19.9 +/- 1.6 respectively. Dosimetric evaluations indicated minimal differences between sCTs and dCTs, with sCTs showing better air-bubble reconstruction. Conclusions: DL-based sCT generation on MR-Linacs is accurate for dose calculation and optimization in MRgART. This could facilitate MR-only treatment planning, enhancing simulation and adaptive planning efficiency on MR-Linacs. △ Less

Submitted 2 December, 2023; originally announced December 2023.

LIME -- a gas TPC prototype for directional Dark Matter search for the CYGNO experiment

Authors: Fernando Domingues Amaro, Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Caponero, Danilo Santos Cardoso, Gianluca Cavoto, André Cortez, Igor Abritta Costa, Emiliano Dané, Giorgio Dho, Flaminia Di Giambattista, Emanuele Di Marco, Giulia D'Imperio, Francesco Iacoangeli, Herman Pessoa Lima Junior, Guilherme Sebastiao Pinheiro Lopes, Giovanni Maccarrone, Rui Daniel Passos Mano, Robert Renz Marcelo Gregorio, David José Gaspar Marques, Giovanni Mazzitelli, Alasdair Gregor McLean, Andrea Messina , et al. (22 additional authors not shown)

Abstract: The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demo… ▽ More The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demonstrator is the 50 L active volume LIME, with 4 PMTs and a single sCMOS imaging a 33$\times$33 cm\textsuperscript{2} area for 50 cm drift, that has been installed in underground Laboratori Nazionali del Gran Sasso in February 2022. We will illustrate LIME performances as evaluated overground in Laboratori Nazionali di Frascati by means of radioactive X-ray sources, and in particular the detector stability, energy response and energy resolution. We will discuss the MC simulation developed to reproduce the detector response and show the comparison with actual data. We will furthermore examine the background simulation worked out for LIME underground data taking and illustrate the foreseen expected measurement and results in terms of natural and materials intrinsic radioactivity characterisation and measurement of the LNGS underground natural neutron flux. The results that will be obtained by underground LIME installation will be paramount in the optimisation of the CYGNO demonstrator, since this is foreseen to be composed by multiple modules with the same LIME dimensions and characteristics. △ Less

Submitted 29 June, 2023; originally announced June 2023.

The CYGNO experiment, a directional detector for direct Dark Matter searches

Authors: F. D. Amaro, E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, D. S. Cardoso, G. Cavoto, A. Cortez, I. A. Costa, E. Dané, G. Dho, F. Di Giambattista, E. Di Marco, G. D'Imperio, F. Iacoangeli, H. P. L. Jùnior, G. S. P. Lopes, G. Maccarrone, R. D. P. Mano, R. R. M. Gregorio, D. J. G. Marques, G. Mazzitelli, A. G. McLean, A. Messina , et al. (22 additional authors not shown)

Abstract: The CYGNO project aims at the development of a high precision optical readout gaseous Tima Projection Chamber (TPC) for directional dark matter (DM) searches, to be hosted at Laboratori Nazionali del Gran Sasso (LNGS). CYGNO employs a He:CF$_4$ gas mixture at atmospheric pressure with a Gas Electron Multiplier (GEM) based amplification structure coupled to an optical readout comprised of sCMOS cam… ▽ More The CYGNO project aims at the development of a high precision optical readout gaseous Tima Projection Chamber (TPC) for directional dark matter (DM) searches, to be hosted at Laboratori Nazionali del Gran Sasso (LNGS). CYGNO employs a He:CF$_4$ gas mixture at atmospheric pressure with a Gas Electron Multiplier (GEM) based amplification structure coupled to an optical readout comprised of sCMOS cameras and photomultiplier tubes (PMTs). This experimental setup allows to achieve 3D tracking and background rejection down to O(1) keV energy, to boost sensitivity to low WIMP masses. The characteristics of the optical readout approach in terms of the light yield will be illustrated along with the particle identification properties. The project timeline foresees, in the next 2-3 years, the realisation and installation of a 0.4 m$^3$ TPC in the underground laboratories at LNGS to act as a demonstrator. Finally, the studies of the expected DM sensitivities of the CYGNO demonstrator will be presented. △ Less

Submitted 7 June, 2023; originally announced June 2023.

JaqalPaw: A Guide to Defining Pulses and Waveforms for Jaqal

Authors: Daniel Lobser, Joshua Goldberg, Andrew J. Landahl, Peter Maunz, Benjamin C. A. Morrison, Kenneth Rudinger, Antonio Russo, Brandon Ruzic, Daniel Stick, Jay Van Der Wall, Susan M. Clark

Abstract: One of the many challenges of develo** an open user testbed such as QSCOUT is providing an interface that maintains simplicity without compromising expressibility or control. This interface comprises two distinct elements: a quantum assembly language designed for specifying quantum circuits at the gate level, and a low-level counterpart used for describing gates in terms of waveforms that realiz… ▽ More One of the many challenges of develo** an open user testbed such as QSCOUT is providing an interface that maintains simplicity without compromising expressibility or control. This interface comprises two distinct elements: a quantum assembly language designed for specifying quantum circuits at the gate level, and a low-level counterpart used for describing gates in terms of waveforms that realize specific quantum operations. Jaqal, or "Just another quantum assembly language," is the language used in QSCOUT for gate-level descriptions of quantum circuits. JaqalPaw, or "Jaqal pulses and waveforms," is its pulse-level counterpart. This document concerns the latter, and presents a description of the tools needed for precisely defining the underlying waveforms associated with a gate primitive. △ Less

Submitted 3 May, 2023; originally announced May 2023.

Comments: Originally published April 2021 at qscout.sandia.gov

Network analysis on political election; populist vs social emergent behaviour

Authors: Andrea Russo, Vincenzo Miracula, Antonio Picone

Abstract: Social networks play an important role in people's daily socialization, particularly through social media platforms, which have become key channels for communication and information dissemination. The digital ecosystem does not only evolve communication on multi-network (like TV, social media, and online newspapers) but also provides the social researcher with useful data to explain social-complex… ▽ More Social networks play an important role in people's daily socialization, particularly through social media platforms, which have become key channels for communication and information dissemination. The digital ecosystem does not only evolve communication on multi-network (like TV, social media, and online newspapers) but also provides the social researcher with useful data to explain social-complex dynamics. Our work focus on cultural dynamics-reactions that occurred during the 2020 Emilia-Romagna elections'' in Italy, where a stronghold culture felt in danger of losing against the strong populism and Euro-scepticism present in digital ecosystems. We would like to show how the interaction between parts of the society, during cultural and/or political shifting, can lead to or induce emerging behaviour from society, creating groups that react against or improve the status quo. We developed a word-entry network based on three different levels of participation: pro, con, and neutral. We have analyzed the tweets collected (as text) with the word embedding tools, to see, the most used words (which may suggest the main topics) and the most related words among the various groups. We show how a careful analysis of groups through networks, can give important information about the current event. △ Less

Submitted 13 January, 2023; originally announced January 2023.

Comments: 13 pages, 5 figures, 3 tables

Quantify how space mission influence geopolitical dynamics? A security and social policy approach

Authors: Andrea Russo, Davide Coco

Abstract: We present a computational method to quantify the geopolitical impact of a space mission, based on the national budget and data logs of previous missions, and evidencing how even if some missions succeed, they can bring negative effects to the sponsored country. The objective of this research is to study how the success (or failure) of a space mission can bring an economical and political benefit… ▽ More We present a computational method to quantify the geopolitical impact of a space mission, based on the national budget and data logs of previous missions, and evidencing how even if some missions succeed, they can bring negative effects to the sponsored country. The objective of this research is to study how the success (or failure) of a space mission can bring an economical and political benefit (or loss) to a country. By retrieving various data, including sentiment from #hashtags related to the considered space missions, national budgets for space exploration, and the reliability of space launch systems, from social networks, public institutions, and online repositories, we propose an equation to evaluate the geopolitical importance of a space mission for a particular country or space agency. The geopolitical equation can be used by public institutions or private companies to estimate the potential impact of a space mission on public opinion and international relationships, which can be either positive or negative, as even successful missions may negatively affect international relationships and negotiations with some countries and their partners. Also we combine the ideology of classic social policy with a security and space mission point of view, to enlighten cultural, institutional, and political limits in public spending decisions. △ Less

Submitted 9 January, 2023; originally announced January 2023.

Comments: 18 pages, 3 figures, 8 tables

Organised Firestorm as strategy for business cyber-attacks

Authors: Andrea Russo

Abstract: Having a good reputation is paramount for most organisations and companies. In fact, having an optimal corporate image allows them to have better transaction relationships with various customers and partners. However, such reputation is hard to build and easy to destroy for all kind of business commercial activities (B2C, B2B, B2B2C, B2G). A misunderstanding during the communication process to the… ▽ More Having a good reputation is paramount for most organisations and companies. In fact, having an optimal corporate image allows them to have better transaction relationships with various customers and partners. However, such reputation is hard to build and easy to destroy for all kind of business commercial activities (B2C, B2B, B2B2C, B2G). A misunderstanding during the communication process to the customers, or just a bad communication strategy, can lead to a disaster for the entire company. This is emphasised by the reaction of millions of people on social networks, which can be very detrimental for the corporate image if they react negatively to a certain event. This is called a firestorm. In this paper, I propose a well-organised strategy for firestorm attacks on organisations, also showing how an adversary can leverage them to obtain private information on the attacked firm. Standard business security procedures are not designed to operate against multi-domain attacks; therefore, I will show how it is possible to bypass the classic and advised security procedures by operating different kinds of attack. I also propose a different firestorm attack, targeting a specific business company network in an efficient way. Finally, I present defensive procedures to reduce the negative effect of firestorms on a company. △ Less

Submitted 4 January, 2023; originally announced January 2023.

Comments: 9 pages, 3 figures, 2 table

Entropy-rate as prediction method for newspapers and information diffusion

Authors: Andrea Russo, Antonio Picone, Vincenzo Miracula, Giovanni Giuffrida, Francesco Mazzeo Rinaldi

Abstract: This paper aims to show how some popular topics on social networks can be used to predict online newspaper views, related to the topics. Newspapers site and many social networks, become a good source of data to analyse and explain complex phenomena. Understanding the entropy of a topic, could help all organizations that need to share information like government, institution, newspaper or company,… ▽ More This paper aims to show how some popular topics on social networks can be used to predict online newspaper views, related to the topics. Newspapers site and many social networks, become a good source of data to analyse and explain complex phenomena. Understanding the entropy of a topic, could help all organizations that need to share information like government, institution, newspaper or company, to expect an higher activity over their channels, and in some cases predict what the receiver expect from the senders or what is wrong about the communication. For some organization such political party, leaders, company and many others, the reputation and the communication are (for most of them) the key part of a more and complex huge system. To reach our goal, we use gathering tools and information theory to detect and analyse trends topic on social networks, with the purpose of proved a method that helps organization, newspapers to predict how many articles or communication they will have to do on a topic, and how much flow of views they will have in a given period, starting with the entropy-article ratio. Our work address the issue to explore in which entropy-rate, and through which dynamics, a suitable information diffusion performance is expected on social network and then on newspaper. We have identified some cross-cutting dynamics that, associated with the contexts, might explain how people discuss about a topic, can move on to argue and informs on newspapers sites. △ Less

Submitted 29 November, 2022; originally announced December 2022.

Comments: 13 pages, 8 figures, journal

Report number: SMS-22-1007

Design of a Resistive Plate Chamber using additive manufacturing

Authors: L. Benussi, S. Bianco, R. Campagnola, M. Caponero, S. Colafranceschi, H. Gebremedhin, J. Hess, J. Horsley, M. Landis, S. Meola, D. Nester, L. Passamonti, L. Peachey-Stoner, R. Peachey-Stoner, D. Piccolo, D. Pierluigi, A. Russo, G. Saviano, L. Stutzman, R. Tezazu

Abstract: Driven by the recent improvement in additive manufacturing technologies, we designed a detector that can be fully printed with a standard and commercial 3D printer. The main goals of this research concern the marginal design and construction costs, the reproducibility/modularity of the products, and the reduced assembly time. During the first phase of this research, after determining the most suit… ▽ More Driven by the recent improvement in additive manufacturing technologies, we designed a detector that can be fully printed with a standard and commercial 3D printer. The main goals of this research concern the marginal design and construction costs, the reproducibility/modularity of the products, and the reduced assembly time. During the first phase of this research, after determining the most suitable material, we produced 10 examples of detectors. △ Less

Submitted 26 October, 2022; originally announced October 2022.

Comments: 2 pages, 4 figures

Airborne Radiometric Surveys and Machine Learning Algorithms for Revealing Soil Texture

Authors: Andrea Maino, Matteo Alberi, Emiliano Anceschi, Enrico Chiarelli, Luca Cicala, Tommaso Colonna, Mario De Cesare, Enrico Guastaldi, Nicola Lopane, Fabio Mantovani, Maurizio Marcialis, Nicola Martini, Michele Montuschi, Silvia Piccioli, Kassandra Giulia Cristina Raptis, Antonio Russo, Filippo Semenza, Virginia Strati

Abstract: Soil texture is key information in agriculture for improving soil knowledge and crop performance, so the accurate map** of this crucial feature is imperative for rationally planning cultivations and for targeting interventions. We studied the relationship between radioelements and soil texture in the Mezzano Lowland (Italy), a 189 $km^2$ agricultural plain investigated through a ded-icated airbo… ▽ More Soil texture is key information in agriculture for improving soil knowledge and crop performance, so the accurate map** of this crucial feature is imperative for rationally planning cultivations and for targeting interventions. We studied the relationship between radioelements and soil texture in the Mezzano Lowland (Italy), a 189 $km^2$ agricultural plain investigated through a ded-icated airborne gamma-ray spectroscopy survey. The K and Th abundances were used to retrieve the clay and sand content by means of a multi-approach method. Linear (simple and multiple) and non-linear (machine learning algorithms with deep neural networks) predictive models were trained and tested adopting a 1:50,000 scale soil texture map. The comparison of these approaches highlighted that the non-linear model introduces significant improvements in the prediction of soil texture fractions. The predicted maps of the clay and of the sand content were compared with the regional soil maps. Although the macro-structures were equally present, the airborne gam-ma-ray data permits us shedding light on finer features. Map areas with higher clay content were coincident with paleo-channels crossing the Mezzano Lowland in Etruscan and Roman periods, confirmed by the hydrographic setting of historical maps and by the geo-morphological features of the study area. △ Less

Submitted 13 August, 2022; originally announced August 2022.

Comments: 18 pages, 9 figures, 3 tables, correspondence to Andrea Maino via email at [email protected]

Journal ref: Remote Sens. 2022, 14, 3814

Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, T. Beyrouthy, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi , et al. (157 additional authors not shown)

Abstract: The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co… ▽ More The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: 45 pages, 39 figures, submitted to Nuclear Instruments and Methods in Physics Research Section A

The CYGNO Experiment

Authors: Fernando Domingues Amaro, Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Caponero, Danilo Santos Cardoso, Gianluca Cavoto, André Cortez, Igor Abritta Costa, Rita Joanna da Cruz Roque, Emiliano Dané, Giorgio Dho, Flaminia Di Giambattista, Emanuele Di Marco, Giovanni Grilli di Cortona, Giulia D'Imperio, Francesco Iacoangeli, Herman Pessoa Lima Júnior, Guilherme Sebastiao Pinheiro Lopes, Amaro da Silva Lopes Júnior, Giovanni Maccarrone, Rui Daniel Passos Mano, Michela Marafini, Robert Renz Marcelo Gregorio , et al. (25 additional authors not shown)

Abstract: The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its proper… ▽ More The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its properties. Gaseous time projection chambers (TPC) with optical readout are very promising detectors combining the detailed event information provided by the TPC technique with the high sensitivity and granularity of latest-generation scientific light sensors. The CYGNO experiment (a CYGNus module with Optical readout) aims to exploit the optical readout approach of multiple-GEM structures in large volume TPCs for the study of rare events as interactions of low-mass DM or solar neutrinos. The combined use of high-granularity sCMOS cameras and fast light sensors allows the reconstruction of the 3D direction of the tracks, offering good energy resolution and very high sensitivity in the few keV energy range, together with a very good particle identification useful for distinguishing nuclear recoils from electronic recoils. This experiment is part of the CYGNUS proto-collaboration, which aims at constructing a network of underground observatories for directional DM search. A one cubic meter demonstrator is expected to be built in 2022/23 aiming at a larger scale apparatus (30 m$^3$--100 m$^3$) at a later stage. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Journal ref: published on Instruments 2022, 6(1), 6

Upgrade of the CMS Resistive Plate Chambers for the High Luminosity LHC

Authors: A. Samalan, M. Tytgat, G. A. Alves, F. Marujo, F. Torres Da Silva De Araujo, E. M. DaCosta, D. De Jesus Damiao, H. Nogima, A. Santoro, S. Fonseca De Souza, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, M. Bonchev, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, C. Bernal, A. Cabrera , et al. (86 additional authors not shown)

Abstract: During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solen… ▽ More During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solenoid (CMS) experiment. To ensure a highly performing muon system for this period, several upgrades of the Resistive Plate Chamber (RPC) system of the CMS are currently being implemented. These include the replacement of the readout system for the present system, and the installation of two new RPC stations with improved chamber and front-end electronics designs. The current overall status of this CMS RPC upgrade project is presented. △ Less

Submitted 2 November, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi, O. Bouhali , et al. (156 additional authors not shown)

Abstract: After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstr… ▽ More After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector. △ Less

Submitted 22 September, 2021; v1 submitted 20 July, 2021; originally announced July 2021.

Comments: 10 pages, 5 figures

Modeling the triple-GEM detector response to background particles for the CMS Experiment

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, I. Azhgirey, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi , et al. (164 additional authors not shown)

Abstract: An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The… ▽ More An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Comments: 16 pages, 9 figures, 6 tables

Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi, O. Bouhali , et al. (156 additional authors not shown)

Abstract: We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequent… ▽ More We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design. △ Less

Submitted 20 September, 2020; originally announced September 2020.

Comments: 22 pages, 14 figures

Journal ref: 2020 JINST 15 P12019

Nanoscale insights on the origin of the Power MOSFETs breakdown after extremely long high temperature reverse bias stress

Authors: P. Fiorenza, M. Alessandrino, B. Carbone, C. Di Martino, A. Russo, M. Saggio, C. Venuto, E. Zanetti, C. Bongiorno, F. Giannazzo, F. Roccaforte

Abstract: In this work, the origin of the dielectric breakdown of 4H-SiC power MOSFETs was studied at the nanoscale, analyzing devices that failed after extremely long (three months) of high temperature reverse bias (HTRB) stress. A one-to-one correspondence between the location of the breakdown event and a threading dislocation propagating through the epitaxial layer was found. Scanning probe microscopy (S… ▽ More In this work, the origin of the dielectric breakdown of 4H-SiC power MOSFETs was studied at the nanoscale, analyzing devices that failed after extremely long (three months) of high temperature reverse bias (HTRB) stress. A one-to-one correspondence between the location of the breakdown event and a threading dislocation propagating through the epitaxial layer was found. Scanning probe microscopy (SPM) revealed the conductive nature of the threading dislocation and a local modification of the minority carriers concentration. Basing on these results, the role of the threading dislocation on the failure of 4H-SiC MOSFETs could be clarified. △ Less

Submitted 10 September, 2020; originally announced September 2020.

Journal ref: Materials Science Forum 1004, (2020) 433-438

Understanding the role of threading dislocations on 4H-SiC MOSFET breakdown under high temperature reverse bias stress

Authors: P. Fiorenza, M. Alessandrino, B. Carbone, C. Di Martino, A. Russo, M. Saggio, C. Venuto, E. Zanetti, F. Giannazzo, F. Roccaforte

Abstract: The origin of dielectric breakdown was studied on 4H-SiC MOSFETs that failed after three months of high temperature reverse bias (HTRB) stress. A local inspection of the failed devices demonstrated the presence of a threading dislocation (TD) at the breakdown location. The nanoscale origin of the dielectric breakdown was highlighted with advanced high-spatial-resolution scanning probe microscopy (… ▽ More The origin of dielectric breakdown was studied on 4H-SiC MOSFETs that failed after three months of high temperature reverse bias (HTRB) stress. A local inspection of the failed devices demonstrated the presence of a threading dislocation (TD) at the breakdown location. The nanoscale origin of the dielectric breakdown was highlighted with advanced high-spatial-resolution scanning probe microscopy (SPM) techniques. In particular, SPM revealed the conductive nature of the TD and a local increase of the minority carrier concentration close to the defect. Numerical simulations estimated a hole concentration 13 orders of magnitude larger than in the ideal 4H-SiC crystal. The hole injection in specific regions of the device explained the failure of the gate oxide under stress. In this way, the key role of the TD in the dielectric breakdown of 4H-SiC MOSFET was unambiguously demonstrated. △ Less

Submitted 10 September, 2020; originally announced September 2020.

Journal ref: Nanotechnology 31, (2020) 125203

CYGNO: a gaseous TPC with optical readout for dark matter directional search

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: The CYGNO project has the goal to use a gaseous TPC with optical readout to detect dark matter and solar neutrinos with low energy threshold and directionality. The CYGNO demonstrator will consist of 1 m 3 volume filled with He:CF 4 gas mixture at atmospheric pressure. Optical readout with high granularity CMOS sensors, combined with fast light detectors, will provide a detailed reconstruction of… ▽ More The CYGNO project has the goal to use a gaseous TPC with optical readout to detect dark matter and solar neutrinos with low energy threshold and directionality. The CYGNO demonstrator will consist of 1 m 3 volume filled with He:CF 4 gas mixture at atmospheric pressure. Optical readout with high granularity CMOS sensors, combined with fast light detectors, will provide a detailed reconstruction of the event topology. This will allow to discriminate the nuclear recoil signal from the background, mainly represented by low energy electron recoils induced by radioactivity. Thanks to the high reconstruction efficiency, CYGNO will be sensitive to low mass dark matter, and will have the potential to overcome the neutrino floor, that ultimately limits non-directional dark matter searches. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Journal ref: Journal of Instrumentation, Volume 15, July 2020

Identification of low energy nuclear recoils in a gas TPC with optical readout

Authors: Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Arturo Caponero, Gianluca Cavoto, Andre Cortez, Igor Abritta Costa, Emanuele Di Marco, Giulia D'Imperio, Giorgio Dho, Fabrizio Iacoangeli, Giovanni Maccarrone, Michela Marafini, Giovanni Mazzitelli, Andrea Messina, Rafael Antunes Nobrega, Aldo Orlandi, Emiliano Paoletti, Luciano Passamonti, Fabrizio Petrucci, Davide Piccolo, Daniele Pierluigi, Davide Pinci, Francesco Renga , et al. (5 additional authors not shown)

Abstract: The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to th… ▽ More The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to the high sensitivity and granularity of last generation scientific light sensors. A TPC with an amplification at the anode obtained with Gas Electron Multipliers (GEM) was tested at the Laboratori Nazionali di Frascati. Photons and neutrons from radioactive sources were employed to induce recoiling nuclei and electrons with kinetic energy in the range [1-100] keV. A He-CF4 (60/40) gas mixture was used at atmospheric pressure and the light produced during the multiplication in the GEM channels was acquired by a high position resolution and low noise scientific CMOS camera and a photomultiplier. A multi-stage pattern recognition algorithm based on an advanced clustering technique is presented here. A number of cluster shape observables are used to identify nuclear recoils induced by neutrons originated from a AmBe source against X-ray 55Fe photo-electrons. An efficiency of 18% to detect nuclear recoils with an energy of about 6 keV is reached obtaining at the same time a 96% 55Fe photo-electrons suppression. This makes this optically readout gas TPC a very promising candidate for future investigations of ultra-rare events as directional direct Dark Matter searches. △ Less

Submitted 27 October, 2021; v1 submitted 24 July, 2020; originally announced July 2020.

Report number: LEMON-20-001

Journal ref: Meas. Sci. and Tech. 2020

A density-based clustering algorithm for the CYGNO data analysis

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: Time Projection Chambers (TPCs) working in combination with Gas Electron Multipliers (GEMs) produce a very sensitive detector capable of observing low energy events. This is achieved by capturing photons generated during the GEM electron multiplication process by means of a high-resolution camera. The CYGNO experiment has recently developed a TPC Triple GEM detector coupled to a low noise and high… ▽ More Time Projection Chambers (TPCs) working in combination with Gas Electron Multipliers (GEMs) produce a very sensitive detector capable of observing low energy events. This is achieved by capturing photons generated during the GEM electron multiplication process by means of a high-resolution camera. The CYGNO experiment has recently developed a TPC Triple GEM detector coupled to a low noise and high spatial resolution CMOS sensor. For the image analysis, an algorithm based on an adapted version of the well-known DBSCAN was implemented, called iDBSCAN. In this paper a description of the iDBSCAN algorithm is given, including test and validation of its parameters, and a comparison with DBSCAN itself and a widely used algorithm known as Nearest Neighbor Clustering (NNC). The results show that the adapted version of DBSCAN is capable of providing full signal detection efficiency and very good energy resolution while improving the detector background rejection. △ Less

Submitted 28 September, 2020; v1 submitted 3 July, 2020; originally announced July 2020.

Journal ref: JINST 15 (2020) no.12, T12003

Stability and detection performance of a GEM-based Optical Readout TPC with He/CF$_4$ gas mixtures

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: The performance and long term stability of an optically readout Time Projection Chamber with an electron amplification structure based on three Gas Electron Multipliers was studied. He/CF$_4$ based gas mixtures were used in two different proportions (60/40 and 70/30) in a CYGNO prototype with 7 litres sensitive volume. With electrical configurations providing very similar electron gains, an almost… ▽ More The performance and long term stability of an optically readout Time Projection Chamber with an electron amplification structure based on three Gas Electron Multipliers was studied. He/CF$_4$ based gas mixtures were used in two different proportions (60/40 and 70/30) in a CYGNO prototype with 7 litres sensitive volume. With electrical configurations providing very similar electron gains, an almost full detection efficiency in the whole detector volume was found with both mixtures, while a light yield about 20\% larger for the 60/40 was found. The electrostatic stability was tested by monitoring voltages and currents during 25 days. The detector worked in very stable and safe condition for the whole period. In the presence of less CF$_4$, a larger probability of unstable events was clearly detected. △ Less

Submitted 17 August, 2020; v1 submitted 1 July, 2020; originally announced July 2020.

Journal ref: JINST 15 (2020) no.10, P10001

CMS RPC Background -- Studies and Measurements

Authors: R. Hadjiiska, A. Samalan, M. Tytgat, N. Zaganidis, G. A. Alves, F. Marujo, F. Torres Da Silva De Araujo, E. M. Da Costa, D. De Jesus Damiao, H. Nogima, A. Santoro, S. Fonseca De Souza, A. Aleksandrov, P. Iaydjiev, M. Rodozov, M. Shopova, G. Sultanov, M. Bonchev, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, C. Bernal , et al. (84 additional authors not shown)

Abstract: The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be upd… ▽ More The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be updated with the final geometry description, once it is available. The radiation background has been studied in terms of expected particle rates, absorbed dose and fluence. Two High Luminosity LHC (HL-LHC) scenarios have been investigated - after collecting $3000$ and $4000$ fb$^{-1}$. Estimations with safety factor of 3 have been considered, as well. △ Less

Submitted 13 December, 2020; v1 submitted 26 May, 2020; originally announced May 2020.

Comments: 6 pages, Conference proceeding for the 2020 Resistive Plate Chambers and Related Detectors. Minor revision of the report, the results remain unchanged. Three new plots are added and some details were explained better

Performance of an optically read out time projection chamber with ultra-relativistic electrons

Authors: V. C. Antochi, E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. N'obrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci , et al. (6 additional authors not shown)

Abstract: The Time Projection Chamber (TPC) is an ideal candidate to finely study the charged particle ionization in a gaseous medium. Large volumes TPCs can be read out with a suitable number of channels offering a complete 3D reconstruction of an ultra-relativistic charged particle track, that is the sequence of its energy releases in the TPC gas volume. Moreover, He-based TPCs are very promising to study… ▽ More The Time Projection Chamber (TPC) is an ideal candidate to finely study the charged particle ionization in a gaseous medium. Large volumes TPCs can be read out with a suitable number of channels offering a complete 3D reconstruction of an ultra-relativistic charged particle track, that is the sequence of its energy releases in the TPC gas volume. Moreover, He-based TPCs are very promising to study keV energy particles as nuclear recoils, opening the possibility for directional searches of Dark Matter (DM) and the study of Solar Neutrinos (SN). In this paper, we report the analysis of the data acquired with a small TPC prototype (named LEMOn) built by the CYGNO collaboration that was exposed to a beam of 450 MeV electrons at the Beam Test Facility of National Laboratories of Frascati. LEMOn is operated with a He-CF4 mixture at atmospheric pressure and is based on a Gas Electron Multipliers amplification stage that produces visible light collected by a sub-millimeter position resolution scientific CMOS camera. This type of readout - in conjunction with a fast light detection - allows a 3D reconstruction of the electrons' tracks. The electrons are leaving a trail of segments of ionizations corresponding to a few keV energy releases each. Their study leads to predict a keV energy threshold and 1-10 mm longitudinal and 0.1-0.3 mm transverse position resolution for nuclear recoils, very promising for the application of optically readout TPC to DM searches and SN measurements. △ Less

Submitted 10 March, 2021; v1 submitted 25 May, 2020; originally announced May 2020.

Report number: INFN-20-06/LNF

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2021

First evidence of luminescence in a He/CF$_4$ gas mixture induced by non-ionizing electrons

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga, F. Rosatelli , et al. (3 additional authors not shown)

Abstract: Optical readout of Gas Electron Multipliers (GEM) provides very interesting performances and has been proposed for different applications in particle physics. In particular, thanks to its good efficiency in the keV energy range, it is being developed for low-energy and rare event studies, such as Dark Matter search. So far, the optical approach exploits the light produced during the avalanche proc… ▽ More Optical readout of Gas Electron Multipliers (GEM) provides very interesting performances and has been proposed for different applications in particle physics. In particular, thanks to its good efficiency in the keV energy range, it is being developed for low-energy and rare event studies, such as Dark Matter search. So far, the optical approach exploits the light produced during the avalanche processes in GEM channels. Further luminescence in the gas can be induced by electrons accelerated by a suitable electric field. The CYGNO collaboration studied this process with a combined use of a triple-GEM structure and a grid in an He/CF$_4$ (60/40) gas mixture at atmospheric pressure. Results reported in this paper allow to conclude that with an electric field of about 11~kV/cm a photon production mean free path of about 1.0~cm was found. △ Less

Submitted 2 July, 2020; v1 submitted 22 April, 2020; originally announced April 2020.

Journal ref: JINST 15, no.08, P08018 (2020)

A 1 m$^3$ Gas Time Projection Chamber with Optical Readout for Directional Dark Matter Searches: the CYGNO Experiment

Authors: E. Baracchini, R. Bedogni, F. Bellini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, I. A. Costa, E. Di Marco, G. D'Imperio, F. Iacoangeli, G. Maccarone, M. Marafini, G. Mazzitelli, A. Messina, A. Orlandi, E. Paoletti, L. Passamonti, A. Pelosi, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (3 additional authors not shown)

Abstract: The aim of the CYGNO project is the construction and operation of a 1~m$^3$ gas TPC for directional dark matter searches and coherent neutrino scattering measurements, as a prototype toward the 100-1000~m$^3$ (0.15-1.5 tons) CYGNUS network of underground experiments. In such a TPC, electrons produced by dark-matter- or neutrino-induced nuclear recoils will drift toward and will be multiplied by a… ▽ More The aim of the CYGNO project is the construction and operation of a 1~m$^3$ gas TPC for directional dark matter searches and coherent neutrino scattering measurements, as a prototype toward the 100-1000~m$^3$ (0.15-1.5 tons) CYGNUS network of underground experiments. In such a TPC, electrons produced by dark-matter- or neutrino-induced nuclear recoils will drift toward and will be multiplied by a three-layer GEM structure, and the light produced in the avalanche processes will be readout by a sCMOS camera, providing a 2D image of the event with a resolution of a few hundred micrometers. Photomultipliers will also provide a simultaneous fast readout of the time profile of the light production, giving information about the third coordinate and hence allowing a 3D reconstruction of the event, from which the direction of the nuclear recoil and consequently the direction of the incoming particle can be inferred. Such a detailed reconstruction of the event topology will also allow a pure and efficient signal to background discrimination. These two features are the key to reach and overcome the solar neutrino background that will ultimately limit non-directional dark matter searches. △ Less

Submitted 8 January, 2020; originally announced January 2020.

Comments: 5 page, 7 figures, contribution to the Conference Records of 2018 IEEE NSS/MIC

A Finite-Volume Method for Fluctuating Dynamical Density Functional Theory

Authors: Antonio Russo, Sergio P. Perez, Miguel A. Durán-Olivencia, Peter Yatsyshin, José A. Carrillo, Serafim Kalliadasis

Abstract: We introduce a finite-volume numerical scheme for solving stochastic gradient-flow equations. Such equations are of crucial importance within the framework of fluctuating hydrodynamics and dynamic density functional theory. Our proposed scheme deals with general free-energy functionals, including, for instance, external fields or interaction potentials. This allows us to simulate a range of physic… ▽ More We introduce a finite-volume numerical scheme for solving stochastic gradient-flow equations. Such equations are of crucial importance within the framework of fluctuating hydrodynamics and dynamic density functional theory. Our proposed scheme deals with general free-energy functionals, including, for instance, external fields or interaction potentials. This allows us to simulate a range of physical phenomena where thermal fluctuations play a crucial role, such as nucleation and other energy-barrier crossing transitions. A positivity-preserving algorithm for the density is derived based on a hybrid space discretization of the deterministic and the stochastic terms and different implicit and explicit time integrators. We show through numerous applications that not only our scheme is able to accurately reproduce the statistical properties (structure factor and correlations) of the physical system, but, because of the multiplicative noise, it allows us to simulate energy barrier crossing dynamics, which cannot be captured by mean-field approaches. △ Less

Submitted 31 December, 2020; v1 submitted 11 October, 2019; originally announced October 2019.

Machine learning memory kernels as closure for non-Markovian stochastic processes

Authors: Antonio Russo, Miguel A. Duran-Olivencia, Ioannis G. Kevrekidis, Serafim Kalliadasis

Abstract: Finding the dynamical law of observable quantities lies at the core of physics. Within the particular field of statistical mechanics, the generalized Langevin equation (GLE) comprises a general model for the evolution of observables covering a great deal of physical systems with many degrees of freedom and an inherently stochastic nature. Although formally exact, the GLE brings its own great chall… ▽ More Finding the dynamical law of observable quantities lies at the core of physics. Within the particular field of statistical mechanics, the generalized Langevin equation (GLE) comprises a general model for the evolution of observables covering a great deal of physical systems with many degrees of freedom and an inherently stochastic nature. Although formally exact, the GLE brings its own great challenges. It depends on the complete history of the observables under scrutiny, as well as the microscopic degrees of freedom, all of which are often inaccessible. We show that these drawbacks can be overcome by adopting elements of machine learning from empirical data, in particular coupling a multilayer perceptron (MLP) with the formal structure of the GLE and calibrating the MLP with the data. This yields a powerful computational tool capable of describing noisy complex systems beyond the realms of statistical mechanics. It is exemplified with a number of representative examples from different fields: from a single colloidal particle and particle chains in a thermal bath to climatology and finance, showing in all cases excellent agreement with the actual observable dynamics. The new framework offers an alternative perspective for the study of non-equilibrium processes opening also a new route for stochastic modelling. △ Less

Submitted 21 November, 2022; v1 submitted 22 March, 2019; originally announced March 2019.

Journal ref: IEEE Trans Neural Netw Learn Syst (2022) 1-13

A new energy spectrum reconstruction method for Time-Of-Flight diagnostics of high-energy laser-driven protons

Authors: G. Milluzzo, V. Scuderi, A. Alejo, A. G. Amico, N. Booth, M. Borghesi, G. A. P. Cirrone, G. Cuttone, D. Doria, J. Green, S. Kar, G. Korn, G. Larosa, R. Leanza, D. Margarone, P. Martin, P. McKenna, G. Petringa, J. Pipek, L. Romagnani, F. Romano, A. Russo, F. Schillaci

Abstract: The Time-of-Flight (ToF) technique coupled with semiconductor-like detectors, as silicon carbide and diamond, is one of the most promising diagnostic methods for high-energy, high repetition rate, laser-accelerated ions allowing a full on-line beam spectral characterization. A new analysis method for reconstructing the energy spectrum of high-energy laser-driven ion beams from TOF signals is hereb… ▽ More The Time-of-Flight (ToF) technique coupled with semiconductor-like detectors, as silicon carbide and diamond, is one of the most promising diagnostic methods for high-energy, high repetition rate, laser-accelerated ions allowing a full on-line beam spectral characterization. A new analysis method for reconstructing the energy spectrum of high-energy laser-driven ion beams from TOF signals is hereby presented and discussed. The proposed method takes into account the detector's working principle, through the accurate calculation of the energy loss in the detector active layer, using Monte Carlo simulations. The analysis method was validated against well-established diagnostics, such as the Thomson Parabola Spectrometer, during an experimental campaign carried out at the Rutherford Appleton Laboratory (RAL, UK) with the high-energy laser-driven protons accelerated by the VULCAN Petawatt laser. △ Less

Submitted 4 December, 2018; originally announced December 2018.

The NUMEN project: NUclear Matrix Elements for Neutrinoless double beta decay

Authors: F. Cappuzzello, C. Agodi, M. Cavallaro, D. Carbone, S. Tudisco, D. Lo Presti, J. R. B. Oliveira, P. Finocchiaro, M. Colonna, D. Rifuggiato, L. Calabretta, D. Calvo, L. Pandola, L. Acosta, N. Auerbach, J. Bellone, R. Bijker, D. Bonanno, D. Bongiovanni, T. Borello-Lewin, I. Boztosun, O. Brunasso, S. Burrello, S. Calabrese, A. Calanna , et al. (46 additional authors not shown)

Abstract: The article describes the main achievements of the NUMEN project together with an updated and detailed overview of the related R&D activities and theoretical developments. NUMEN proposes an innovative technique to access the nuclear matrix elements entering the expression of the lifetime of the double beta decay by cross section measurements of heavy-ion induced Double Charge Exchange (DCE) reacti… ▽ More The article describes the main achievements of the NUMEN project together with an updated and detailed overview of the related R&D activities and theoretical developments. NUMEN proposes an innovative technique to access the nuclear matrix elements entering the expression of the lifetime of the double beta decay by cross section measurements of heavy-ion induced Double Charge Exchange (DCE) reactions. Despite the two processes, namely neutrinoless double beta decay and DCE reactions, are triggered by the weak and strong interaction respectively, important analogies are suggested. The basic point is the coincidence of the initial and final state many-body wave-functions in the two types of processes and the formal similarity of the transition operators. First experimental results obtained at the INFN-LNS laboratory for the 40Ca(18O,18Ne)40Ar reaction at 270 MeV, give encouraging indication on the capability of the proposed technique to access relevant quantitative information. The two major aspects for this project are the K800 Superconducting Cyclotron and MAGNEX spectrometer. The former is used for the acceleration of the required high resolution and low emittance heavy ion beams and the latter is the large acceptance magnetic spectrometer for the detection of the ejectiles. The use of the high-order trajectory reconstruction technique, implemented in MAGNEX, allows to reach the experimental resolution and sensitivity required for the accurate measurement of the DCE cross sections at forward angles. However, the tiny values of such cross sections and the resolution requirements demand beam intensities much larger than manageable with the present facility. The on-going upgrade of the INFN-LNS facilities in this perspective is part of the NUMEN project and will be discussed in the article. △ Less

Submitted 21 November, 2018; originally announced November 2018.

Geant4 simulation of the ELIMED transport and dosimetry beam line for high-energy laser-driven ion beam multidisciplinary applications

Authors: G. Milluzzo, J. Pipek, A. G. Amico, G. A. P. Cirrone, G. Cuttone, G. Korn, G. Larosa, R. Leanza, D. Margarone, G. Petringa, A. Russo, F. Schillaci, V. Scuderi, F. Romano

Abstract: The ELIMED (MEDical and multidisciplinary application at ELI Beamlines) beam line is being developed at INFN-LNS with the aim of transporting and selecting in energy proton and ion beams accelerated by laser-matter interaction at ELI Beamlines in Prague. It will be a section of the ELIMAIA (ELI Multidisciplinary Applications of laser-Ions Acceleration) beam line, dedicated to applications, includi… ▽ More The ELIMED (MEDical and multidisciplinary application at ELI Beamlines) beam line is being developed at INFN-LNS with the aim of transporting and selecting in energy proton and ion beams accelerated by laser-matter interaction at ELI Beamlines in Prague. It will be a section of the ELIMAIA (ELI Multidisciplinary Applications of laser-Ions Acceleration) beam line, dedicated to applications, including the medical one, of laser-accelerated ion beams [1,2]. A Monte Carlo model has been developed to support the design of the beam line in terms of particle transport efficiency, to optimize the transport parameters at the irradiation point in air and, furthermore, to predict beam parameters in order to deliver dose distributions of clinical relevance. The application has been developed using the Geant4 [3] Monte Carlo toolkit and has been designed in a modular way in order to easily switch on/off geometrical components according to different experimental setups and users requirements, as reported in [4], describing the early-stage code and simulations. The application has been delivered to ELI Beamlines and will be available for future ELIMAIA's users as ready-to-use tool useful during experiment preparation and analysis. The final version of the developed application will be described in detail in this contribution, together with the final results, in terms of energy spectra and transmission efficiency along the in-vacuum beam line, obtained by performing end-to-end simulations. △ Less

Submitted 11 February, 2018; originally announced February 2018.

Comments: EAAC 2017 proceeding NIM A

Preliminary results of Resistive Plate Chambers operated with eco-friendly gas mixtures for application in the CMS experiment

Authors: M. Abbrescia, P. Van Auwegem, L. Benussi, S. Bianco, S. Cauwenbergh, M. Ferrini, S. Muhammad, L. Passamonti, D. Pierluigi, D. Piccolo, F. Primavera, A. Russo, G. Saviano, M. Tytgat

Abstract: The operations of Resistive Plate Chambers in LHC experiments require Fluorine based (F-based) gases for optimal performance. Recent European regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade, several tests are ongoing to measure the performance of the detector with these new ecological gas mixtures, in terms of ef… ▽ More The operations of Resistive Plate Chambers in LHC experiments require Fluorine based (F-based) gases for optimal performance. Recent European regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade, several tests are ongoing to measure the performance of the detector with these new ecological gas mixtures, in terms of efficiency, streamer probability, induced charge and time resolution. Prototype chambers with readout pads and with the standard CMS electronic setup are under test. In this paper preliminary results on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze, with CO2 and CF3I based gas mixtures are presented and discussed for the possible application in the CMS experiment. △ Less

Submitted 26 May, 2016; originally announced May 2016.

Comments: 7 pages, 7 figures. arXiv admin note: text overlap with arXiv:1505.01648

Eco-friendly gas mixtures for Resistive Plate Chambers based on Tetrafluoropropene and Helium

Authors: M. Abbrescia, L. Benussi, S. Bianco, M. Ferrini, S. Muhammad, L. Passamonti, D. Pierluigi, D. Piccolo, F. Primavera, A. Russo, G. Saviano

Abstract: Due to the recent restrictions deriving from the application of the Kyoto protocol, the main components of the gas mixtures presently used in the Resistive Plate Chambers systems of the LHC experiments will be most probably phased out of production in the coming years. Identifying possible replacements with the adequate characteristics requires an intense R&D, which was recently started, also in c… ▽ More Due to the recent restrictions deriving from the application of the Kyoto protocol, the main components of the gas mixtures presently used in the Resistive Plate Chambers systems of the LHC experiments will be most probably phased out of production in the coming years. Identifying possible replacements with the adequate characteristics requires an intense R&D, which was recently started, also in collaborations across the various experiments. Possible candidates have been proposed and are thoroughly investigated. Some tests on one of the most promising candidate - HFO-1234ze, an allotropic form of tetrafluoropropane- have already been reported. Here an innovative approach, based on the use of Helium, to solve the problems related to the too elevate operating voltage of HFO-1234ze based gas mixtures, is discussed and the relative first results are shown. △ Less

Submitted 4 May, 2016; originally announced May 2016.

Comments: 9 pages, 6 figures, 1 table

Fiber Bragg Grating sensors for deformation monitoring of GEM foils in HEP detectors

Authors: L. Benussi, S. Bianco, M. Caponero, S. Muhammad, L. Passamonti, D. Piccolo, D. Pierluigi, G. Raffone, A. Russo, G. Saviano

Abstract: Fiber Bragg Grating (FBG) sensors have been so far mainly used in high energy physics (HEP) as high precision positioning and re-positioning sensors and as low cost, easy to mount, radiation hard and low space- consuming temperature and humidity devices. FBGs are also commonly used for very precise strain measurements. In this work we present a novel use of FBGs as flatness and mechanical tensioni… ▽ More Fiber Bragg Grating (FBG) sensors have been so far mainly used in high energy physics (HEP) as high precision positioning and re-positioning sensors and as low cost, easy to mount, radiation hard and low space- consuming temperature and humidity devices. FBGs are also commonly used for very precise strain measurements. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide Gas Electron Multiplier (GEM) foils of the GE1/1 chambers of the Compact Muon Solenoid (CMS) experiment at Large Hadron Collider (LHC) of CERN. A network of FBG sensors has been used to determine the optimal mechanical tension applied and to characterize the mechanical stress applied to the foils. The preliminary results of the test performed on a full size GE1/1 final prototype and possible future developments will be discussed. △ Less

Submitted 29 December, 2015; originally announced December 2015.

Comments: Four pages, seven figures. Presented by Michele Caponero at IWASI 2015, Gallipoli (Italy)

Report number: Frascati preprint INFN-15-13/LNF

Characterization of the GEM foil materials

Authors: L. Benussi, S. Bianco, G. Saviano, S. Muhammad, D. Piccolo, G. Raffone, M. Caponero, L. Passamonti, D. Pierluigi, A. Russo, F. Primavera, S. Cerbelli, A. Lalli, M. Valente, M. Ferrini, B. Teissandier, M. Taborelli, M. Parvis, S. Grassini, J. Tirilló, F. Sarasini, A. V. Franchi

Abstract: Systematic studies on the GEM foil material are performed to measure the moisture diffusion rate and saturation level. These studies are important because the presence of this compound inside the detector's foil can possibly change its mechanical and electrical properties and, in such a way, the detector performance can be affected. To understand this phenomenon, a model is developed with COMSOL M… ▽ More Systematic studies on the GEM foil material are performed to measure the moisture diffusion rate and saturation level. These studies are important because the presence of this compound inside the detector's foil can possibly change its mechanical and electrical properties and, in such a way, the detector performance can be affected. To understand this phenomenon, a model is developed with COMSOL Multhiphysics v. 4.3, which described the adsorption and diffusion within the geometry of GEM foil, the concentration profiles and the time required to saturate the foil. The COMSOL model is verified by experimental observations on a GEM foil sample. This note will describe the model and its experimental verification results. △ Less

Submitted 29 December, 2015; originally announced December 2015.

Comments: Four pages, eight figures, presented by S. Muhammad at the MPGD2015, Trieste, Italy

Report number: INFN-15-12/LNF

A novel application of Fiber Bragg Grating (FBG) sensors in MPGD

Authors: D. Abbaneo, M. Abbas, M. Abbrescia, A. A. Abdelalim, M. Abi Akl, O. Aboamer, D. Acosta, A. Ahmad, W. Ahmed, W. Ahmed, A. Aleksandrov, R. Aly, P. Altieri, C. Asawatangtrakuldee, P. Aspell, Y. Assran, I. Awan, S. Bally, Y. Ban, S. Banerjee, V. Barashko, P. Barria, G. Bencze, N. Beni, L. Benussi , et al. (133 additional authors not shown)

Abstract: We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active are… ▽ More We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements in material studies. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide GEM foils of the GE1/1 chambers. A network of FBG sensors have been used to determine the optimal mechanical tension applied and to characterise the mechanical tension that should be applied to the foils. We discuss the results of the test done on a full-sized GE1/1 final prototype, the studies done to fully characterise the GEM material, how this information was used to define a standard assembly procedure and possible future developments. △ Less

Submitted 28 December, 2015; originally announced December 2015.

Comments: 4 pages, 4 figures, presented by Luigi Benussi at MPGD 2015 (Trieste, Italy). arXiv admin note: text overlap with arXiv:1512.08481

Report number: INFN-15-10/LNF

Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

Authors: D. Abbaneo, M. Abbas, M. Abbrescia, A. A. Abdelalim, M. Abi Akl, O. Aboamer, D. Acosta, A. Ahmad, W. Ahmed, W. Ahmed, A. Aleksandrov, R. Aly, P. Altieri, C. Asawatangtrakuldee, P. Aspell, Y. Assran, I. Awan, S. Bally, Y. Ban, S. Banerjee, V. Barashko, P. Barria, G. Bencze, N. Beni, L. Benussi , et al. (133 additional authors not shown)

Abstract: A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented. A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented. △ Less

Submitted 28 December, 2015; originally announced December 2015.

Comments: Two pages, one figure. Presented by Luigi Benussi (corresponding author) to Elba 2015 conference

Report number: Frascati Preprint INFN-15-09/LNF

A study of HFO-1234ze (1,3,3,3-Tetrafluoropropene) as an eco-friendly replacement in RPC detectors

Authors: L. Benussi, S. Bianco, M. Ferrini, L. Passamonti, D. Pierluigi, D. Piccolo, A. Russo, G. Saviano

Abstract: The operations of Resistive Plate Chambers in LHC experiments require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This report shows results of studies on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze. The operations of Resistive Plate Chambers in LHC experiments require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This report shows results of studies on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Comments: 15 pages, 20 figures

Report number: INFN report INFN-14-14/LNF

Performance of the gas gain monitoring system of the CMS RPC muon detector

Authors: L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, G. Raffone, A. Russo, G. Saviano, Y. Ban, J. Cai, Q. Li, S. Liu, S. Qian, D. Wang, Z. Xu, F. Zhang, Y. Choi, D. Kim, S. Choi, B. Hong, J. W. Kang, M. Kang, J. H. Kwon, K. S. Lee, S. K. Park , et al. (60 additional authors not shown)

Abstract: The RPC muon detector of the CMS experiment at the LHC (CERN, Geneva, Switzerland) is equipped with a Gas Gain Monitoring (GGM) system. A report on the stability of the system during the 2011-2012 data taking run is given, as well as the observation of an effect which suggests a novel method for the monitoring of gas mixture composition. The RPC muon detector of the CMS experiment at the LHC (CERN, Geneva, Switzerland) is equipped with a Gas Gain Monitoring (GGM) system. A report on the stability of the system during the 2011-2012 data taking run is given, as well as the observation of an effect which suggests a novel method for the monitoring of gas mixture composition. △ Less

Submitted 27 December, 2014; originally announced December 2014.

Comments: Presented at RPC2014, Bei**g, China. Accepted for publication on JINST

Report number: INFN-14-22/LNF

Daily pollution forecast using optimal meteorological data at synoptic and local scales

Authors: Ana Russo, Pedro G. Lind, Frank Raischel, Ricardo Trigo, Manuel Mendes

Abstract: We present a simple framework to easily pre-select the most essential data for accurately forecasting the concentration of the pollutant PM$_{10}$, based on pollutants observations for the years 2002 until 2006 in the metropolitan region of Lisbon, Portugal. Starting from a broad panoply of different data sets collected at several meteorological stations, we apply a forward stepwise regression pro… ▽ More We present a simple framework to easily pre-select the most essential data for accurately forecasting the concentration of the pollutant PM$_{10}$, based on pollutants observations for the years 2002 until 2006 in the metropolitan region of Lisbon, Portugal. Starting from a broad panoply of different data sets collected at several meteorological stations, we apply a forward stepwise regression procedure that enables us not only to identify the most important variables for forecasting the pollutant but also to rank them in order of importance. We argue the importance of this variable ranking, showing that the ranking is very sensitive to the urban spot where measurements are taken. Having this pre-selection, we then present the potential of linear and non-linear neural network models when applied to the concentration of pollutant PM$_{10}$. Similarly to previous studies for other pollutants, our validation results show that non-linear models in average perform as well or worse as linear models for PM$_{10}$. Finally, we also address the influence of Circulation Weather Types, characterizing synoptic scale circulation patterns and the concentration of pollutants. △ Less

Submitted 29 October, 2014; originally announced November 2014.

Comments: 11 pages, 4 figures, 4 tables

A review of modeling applications using ROMS model and COAWST system in the Adriatic sea region

Authors: Sandro Carniel, Aniello Russo, Alvise Benetazzo

Abstract: From the first implementation in its purely hydrodynamic configuration, to the last configuration under the Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST) system, several specific modelling applications of the Regional Ocean Modelling Systems (ROMS, www.myroms.org) have been put forward within the Adriatic Sea (Italy) region. Covering now a wide range of spatial and temporal scales, the… ▽ More From the first implementation in its purely hydrodynamic configuration, to the last configuration under the Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST) system, several specific modelling applications of the Regional Ocean Modelling Systems (ROMS, www.myroms.org) have been put forward within the Adriatic Sea (Italy) region. Covering now a wide range of spatial and temporal scales, they developed in a growing number of fields supporting Integrated Coastal Zone Management (ICZM) and Marine Spatial Planning (MSP) activities in this semi-enclosed sea of paramount importance including the Gulf of Venice. Presently, a ROMS operational implementation provides every day hydrodynamic and sea level 3-days forecasts, while a second one models the most relevant biogeochemical properties, and a third one (two-way coupled with the Simulating Waves Nearshore (SWAN) model) deals with extreme waves forecast. Such operational models provide support to civil and environmental protection activities (e.g., driving sub-models for oil-spill dispersion, storm surge, coastal morphodynamic changes during storms, saline wedge intrusion along Po River), in a growing context of stake-holders at regional, national and international level. Besides, ROMS and COAWST research based activities are also carried out, mostly aiming at investigating sediment transport, eggs and larvae dispersion, hypoxic events in the basin; through successive nesting very high resolutions nearshore the Italian coast can be reached, allowing to simulate river mouth environments and artificial reefs. Resulting outputs, written in NetCDF CF compliant format, are delivered via THREDDS Data Server to a growing number of users around the world. △ Less

Submitted 9 February, 2014; v1 submitted 29 September, 2013; originally announced September 2013.

Comments: pre-print of paper to be completed and submitted. Revised on Feb 2014

New results on $ν_μ\to ν_τ$ appearance with the OPERA experiment in the CNGS beam

Authors: OPERA Collaboration, N. Agafonova, A. Aleksandrov, A. Anokhina, S. Aoki, A. Ariga, T. Ariga, T. Asada, D. Autiero, A. Badertscher, A. Ben Dhahbi, D. Bender, A. Bertolin, C. Bozza, R. Brugnera, G. Brunetti, B. Buettner, S. Buontempo, L. Chaussard, M. Chernyavskiy, V. Chiarella, A. Chukanov, L. Consiglio, N. D'Ambrosio, P. Del Amo Sanchez , et al. (145 additional authors not shown)

Abstract: The OPERA neutrino experiment is designed to perform the first observation of neutrino oscillations in direct appearance mode in the $ν_μ\to ν_τ$ channel, via the detection of the $τ$-leptons created in charged current $ν_τ$ interactions. The detector, located in the underground Gran Sasso Laboratory, consists of an emulsion/lead target with an average mass of about 1.2 kt, complemented by electro… ▽ More The OPERA neutrino experiment is designed to perform the first observation of neutrino oscillations in direct appearance mode in the $ν_μ\to ν_τ$ channel, via the detection of the $τ$-leptons created in charged current $ν_τ$ interactions. The detector, located in the underground Gran Sasso Laboratory, consists of an emulsion/lead target with an average mass of about 1.2 kt, complemented by electronic detectors. It is exposed to the CERN Neutrinos to Gran Sasso beam, with a baseline of 730 km and a mean energy of 17 GeV. The observation of the first $ν_τ$ candidate event and the analysis of the 2008-2009 neutrino sample have been reported in previous publications. This work describes substantial improvements in the analysis and in the evaluation of the detection efficiencies and backgrounds using new simulation tools. The analysis is extended to a sub-sample of 2010 and 2011 data, resulting from an electronic detector-based pre-selection, in which an additional $ν_τ$ candidate has been observed. The significance of the two events in terms of a $ν_μ\to ν_τ$ oscillation signal is of 2.40 $σ$. △ Less

Submitted 12 August, 2013; originally announced August 2013.

Comments: 33 pages, 12 figures, 5 tables. Prepared for submission to JHEP

Air quality prediction using optimal neural networks with stochastic variables

Authors: Ana Russo, Frank Raischel, Pedro G. Lind

Abstract: We apply recent methods in stochastic data analysis for discovering a set of few stochastic variables that represent the relevant information on a multivariate stochastic system, used as input for artificial neural networks models for air quality forecast. We show that using these derived variables as input variables for training the neural networks it is possible to significantly reduce the amoun… ▽ More We apply recent methods in stochastic data analysis for discovering a set of few stochastic variables that represent the relevant information on a multivariate stochastic system, used as input for artificial neural networks models for air quality forecast. We show that using these derived variables as input variables for training the neural networks it is possible to significantly reduce the amount of input variables necessary for the neural network model, without considerably changing the predictive power of the model. The reduced set of variables including these derived variables is therefore proposed as optimal variable set for training neural networks models in forecasting geophysical and weather properties. Finally, we briefly discuss other possible applications of such optimized neural network models. △ Less

Submitted 11 July, 2013; originally announced July 2013.

Study of gas contaminants and interaction with materials in RPC closed loop system

Authors: S. Colafranceschi, R. Aurilio, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, M. Ferrini, T. Greci, G. Saviano, C. Vendittozzi, M. Abbrescia, C. Calabria, A. Colaleo, G. Iaselli, M. Maggi, S. Nuzzo, G. Pugliese, P. Verwilligen, A. Sharma

Abstract: Resistive Plate Counters (RPC) detectors at the Large Hadron Collider (LHC) experiments use gas recirculation systems to cope with large gas mixture volumes and costs. In this paper a long-term systematic study about gas purifiers, gas contaminants and detector performance is discussed. The study aims at measuring the lifetime of purifiers with new and used cartridge material along with contaminan… ▽ More Resistive Plate Counters (RPC) detectors at the Large Hadron Collider (LHC) experiments use gas recirculation systems to cope with large gas mixture volumes and costs. In this paper a long-term systematic study about gas purifiers, gas contaminants and detector performance is discussed. The study aims at measuring the lifetime of purifiers with new and used cartridge material along with contaminants release in the gas system. During the data-taking the response of several RPC double-gap detectors was monitored in order to characterize the correlation between dark currents, filter status and gas contaminants. △ Less

Submitted 22 March, 2013; v1 submitted 21 February, 2013; originally announced February 2013.

Comments: This paper has been withdrawn by the authors. revised version of already uploaded paper [1210.1819]

Measurement of the neutrino velocity with the OPERA detector in the CNGS beam using the 2012 dedicated data

Authors: The OPERA Collaboration, T. Adam, N. Agafonova, A. Aleksandrov, A. Anokhina, S. Aoki, A. Ariga, T. Ariga, D. Autiero, A. Badertscher, A. Ben Dhahbi, M. Beretta, A. Bertolin, C. Bozza, T. Brugière, R. Brugnera, F. Brunet, G. Brunetti, B. Buettner, S. Buontempo, B. Carlus, F. Cavanna, A. Cazes, L. Chaussard, M. Chernyavsky , et al. (146 additional authors not shown)

Abstract: In spring 2012 CERN provided two weeks of a short bunch proton beam dedicated to the neutrino velocity measurement over a distance of 730 km. The OPERA neutrino experiment at the underground Gran Sasso Laboratory used an upgraded setup compared to the 2011 measurements, improving the measurement time accuracy. An independent timing system based on the Resistive Plate Chambers was exploited providi… ▽ More In spring 2012 CERN provided two weeks of a short bunch proton beam dedicated to the neutrino velocity measurement over a distance of 730 km. The OPERA neutrino experiment at the underground Gran Sasso Laboratory used an upgraded setup compared to the 2011 measurements, improving the measurement time accuracy. An independent timing system based on the Resistive Plate Chambers was exploited providing a time accuracy of $\sim$1 ns. Neutrino and anti-neutrino contributions were separated using the information provided by the OPERA magnetic spectrometers. The new analysis profited from the precision geodesy measurements of the neutrino baseline and of the CNGS/LNGS clock synchronization. The neutrino arrival time with respect to the one computed assuming the speed of light in vacuum is found to be $δt_ν\equiv TOF_c - TOF_ν= (0.6 \pm 0.4\ (stat.) \pm 3.0\ (syst.))$ ns and $δt_{\barν} \equiv TOF_c - TOF_{\barν} = (1.7 \pm 1.4\ (stat.) \pm 3.1\ (syst.))$ ns for $ν_μ$ and $\barν_μ$, respectively. This corresponds to a limit on the muon neutrino velocity with respect to the speed of light of $-1.8 \times 10^{-6} < (v_ν-c)/c < 2.3 \times 10^{-6}$ at 90% C.L. This new measurement confirms with higher accuracy the revised OPERA result. △ Less

Submitted 17 December, 2012; v1 submitted 6 December, 2012; originally announced December 2012.

Comments: 14 pages, 4 figures

A study of gas contaminants and interaction with materials in RPC closed loop systems

Authors: S. Colafranceschi, R. Aurilio, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, M. Ferrini, T. Greci, G. Saviano, C. Vendittozzi, M. Abbrescia, C. Calabria, A. Colaleo, G. Iaselli, M. Maggi, S. Nuzzo, G. Pugliese, P. Verwilligen, A. Sharma

Abstract: Resistive Plate Counters (RPC) detectors at the Large Hadron Collider (LHC) experiments use gas recirculation systems to cope with large gas mixture volumes and costs. In this paper a long-term systematic study about gas purifiers, gas contaminants and detector performance is discussed. The study aims at measuring the lifetime of purifiers with unused and used cartridge material along with contami… ▽ More Resistive Plate Counters (RPC) detectors at the Large Hadron Collider (LHC) experiments use gas recirculation systems to cope with large gas mixture volumes and costs. In this paper a long-term systematic study about gas purifiers, gas contaminants and detector performance is discussed. The study aims at measuring the lifetime of purifiers with unused and used cartridge material along with contaminants release in the gas system. During the data-taking the response of several RPC double-gap detectors was monitored in order to characterize the correlation between dark currents, filter status and gas contaminants. △ Less

Submitted 5 October, 2012; originally announced October 2012.