-
Application of Haldane's statistical correlation theory in classical systems
Authors:
Projesh Kumar Roy
Abstract:
This letter investigates the application of Haldane's statistical correlation theory in classical systems. A modified statistical correlation theory has been proposed by including non-linearity in the form of an exponent into the original theory of Haldane. The dependence of the statistical correlation on indistinguishability is highlighted. Using this modified theory, a quasi-classical derivation…
▽ More
This letter investigates the application of Haldane's statistical correlation theory in classical systems. A modified statistical correlation theory has been proposed by including non-linearity in the form of an exponent into the original theory of Haldane. The dependence of the statistical correlation on indistinguishability is highlighted. Using this modified theory, a quasi-classical derivation of intermediate statistics is shown where indistinguishability can be introduced into distinguishable systems in the form of a statistical correlation. The final result is equivalent to the classical fractional exclusion statistics (CFES), which was derived earlier using a purely classical route. An extended non-linear correlation model based on power series expansion is also proposed, which can produce various intermediate statistical models.
△ Less
Submitted 24 June, 2024; v1 submitted 20 June, 2024;
originally announced June 2024.
-
Exact Enforcement of Temporal Continuity in Sequential Physics-Informed Neural Networks
Authors:
Pratanu Roy,
Stephen Castonguay
Abstract:
The use of deep learning methods in scientific computing represents a potential paradigm shift in engineering problem solving. One of the most prominent developments is Physics-Informed Neural Networks (PINNs), in which neural networks are trained to satisfy partial differential equations (PDEs). While this method shows promise, the standard version has been shown to struggle in accurately predict…
▽ More
The use of deep learning methods in scientific computing represents a potential paradigm shift in engineering problem solving. One of the most prominent developments is Physics-Informed Neural Networks (PINNs), in which neural networks are trained to satisfy partial differential equations (PDEs). While this method shows promise, the standard version has been shown to struggle in accurately predicting the dynamic behavior of time-dependent problems. To address this challenge, methods have been proposed that decompose the time domain into multiple segments, employing a distinct neural network in each segment and directly incorporating continuity between them in the loss function of the minimization problem. In this work we introduce a method to exactly enforce continuity between successive time segments via a solution ansatz. This hard constrained sequential PINN (HCS-PINN) method is simple to implement and eliminates the need for any loss terms associated with temporal continuity. The method is tested for a number of benchmark problems involving both linear and non-linear PDEs. Examples include various first order time dependent problems in which traditional PINNs struggle, namely advection, Allen-Cahn, and Korteweg-de Vries equations. Furthermore, second and third order time-dependent problems are demonstrated via wave and Jerky dynamics examples, respectively. Notably, the Jerky dynamics problem is chaotic, making the problem especially sensitive to temporal accuracy. The numerical experiments conducted with the proposed method demonstrated superior convergence and accuracy over both traditional PINNs and the soft-constrained counterparts.
△ Less
Submitted 7 March, 2024; v1 submitted 15 February, 2024;
originally announced March 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Numerical simulation of charging up, accumulation of space charge and formation of discharges
Authors:
Purba Bhattacharya,
Promita Roy,
Tanay Dey,
Jaydeep Datta,
Prasant K. Rout,
Nayana Majumdar,
Supratik Mukhopadhyay
Abstract:
Aging and stability of gaseous ionization detectors are intricately related to charging up, accumulation of space charge and formation of discharges. All these phenomena, in their turn, depend on the dynamics of charged particles within the device. Because of the large number of particles involved and their complex interactions, the dynamic processes of generation and loss of charged particles, an…
▽ More
Aging and stability of gaseous ionization detectors are intricately related to charging up, accumulation of space charge and formation of discharges. All these phenomena, in their turn, depend on the dynamics of charged particles within the device. Because of the large number of particles involved and their complex interactions, the dynamic processes of generation and loss of charged particles, and their transport within the detector volume are extremely expensive to simulate numerically. In this work, we propose and evaluate possible algorithms / approaches that show some promise in relation to the above-mentioned problems. Several important ionization detectors having parallel plate configurations, such as GEM, Micromegas, RPCs and THGEMs, are considered for this purpose. Information related to primary ionization is obtained from HEED, while all the transport properties are evaluated using MAGBOLTZ. The transport dynamics have been followed using two different approaches. In one, particle description using neBEM-Garfield++ combination has been used. For this purpose, the neBEM solver has been significantly improved such that perturbations due to the charged particles present within the device are considered while estimating electric field. In the other approach, the transport is simulated following hydrodynamic model using COMSOL during which the electric field is also provided by COMSOL where it is easy to set up space charge effects. A comparison between these possible approaches will be presented. Effect of different simulation parameters will also be demonstrated using simple examples.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Physical, chemical and morphological evolution of incipient soot obtained from molecular dynamics simulation of acetylene pyrolysis
Authors:
Khaled Mosharraf Mukut,
Anindya Ganguly,
Eirini Goudeli,
Georgios A. Kelesidis,
Somesh P. Roy
Abstract:
Incipient soot particles obtained from a series of reactive molecular dynamics simulations were studied to understand the evolution of physical, chemical, and morphological properties of incipient soot. Reactive molecular dynamics simulations of acetylene pyrolysis were performed using ReaxFF potential at 1350, 1500, 1650, and 1800 K. A total of 3324 incipient soot particles were extracted from th…
▽ More
Incipient soot particles obtained from a series of reactive molecular dynamics simulations were studied to understand the evolution of physical, chemical, and morphological properties of incipient soot. Reactive molecular dynamics simulations of acetylene pyrolysis were performed using ReaxFF potential at 1350, 1500, 1650, and 1800 K. A total of 3324 incipient soot particles were extracted from the simulations at various stages of development. Features such as the number of carbon and hydrogen atoms, number of ring structures, mass, C/H ratio, radius of gyration, surface area, volume, atomic fractal dimension, and density were calculated for each particle. The calculated values of density and C/H ratio matched well with experimental values reported in the literature. Based on the calculated features, the particles were classified in two types: type 1 and type 2 particles. It was found that type 1 particles show significant morphological evolution while type 2 particles undergo chemical restructuring without any significant morphological change. The particle volume was found to be well-correlated with the number of carbon atoms in both type 1 and type 2 particle, whereas surface area was found to be correlated with the number of carbon atoms only for type 1 particles. A correlation matrix comparing the level of correlation between any two features for both type 1 and type 2 particle was created. Finally, based on the calculated statistics, a set of correlations among various physical and morphological parameters of incipient soot was proposed.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Internal structure of incipient soot from acetylene pyrolysis obtained via molecular dynamics simulations
Authors:
Khaled Mosharraf Mukut,
Anindya Ganguly,
Eirini Goudeli,
Georgios A. Kelesidis,
Somesh P. Roy
Abstract:
A series of reactive molecular dynamics simulations is used to study the internal structure of incipient soot particles obtained from acetylene pyrolysis. The simulations were performed using ReaxFF potential at four different temperatures. The resulting soot particles are cataloged and analyzed to obtain statistics of their mass, volume, density, C/H ratio, number of cyclic structures, and other…
▽ More
A series of reactive molecular dynamics simulations is used to study the internal structure of incipient soot particles obtained from acetylene pyrolysis. The simulations were performed using ReaxFF potential at four different temperatures. The resulting soot particles are cataloged and analyzed to obtain statistics of their mass, volume, density, C/H ratio, number of cyclic structures, and other features. A total of 3324 incipient soot particles were analyzed in this study. Based on their structural characteristics, the incipient soot particles are classified into two classes, referred to as type 1 and type 2 incipient soot particles in this work. The radial distribution of density, cyclic (5-, 6-, or 7-member rings) structures and C/H ratio inside the particles revealed a clear difference in the internal structure between type 1 and type 2 particles. These classes were further found to be well represented by the size of the particles with smaller particles in type 1 and larger particles in type 2. The radial distributions of ring structures, density, and C/H ratio indicated the presence of a dense core region in type 2 particles, whereas no clear evidence of the presence of a core was found in type 1 particles. In type 2 incipient soot particles, the boundary between the core and shell was found to be around 50%-60% of the particle radius of gyration.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar Es-sghir,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1300 additional authors not shown)
Abstract:
Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN…
▽ More
Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen.
△ Less
Submitted 9 February, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Design and fabrication of dispersion controlled highly nonlinear fibers for far-tuned four-wave mixing frequency conversion
Authors:
Sidi-Ely Ahmedou,
Romain Dauliat,
Alexandre Parriaux,
Alix Malfondet,
Guy Millot,
Laurent Labonte,
Sébastien Tanzilli,
Romain Dalidet,
Jean-Christophe Delagnes,
Philippe Roy,
Raphael Jamier
Abstract:
We report on the conception, fabrication and characterization of a new concept of optical fiber enabling a precise control of the ratio between the 2nd and 4th-order of chromatic dispersion (respectively \b{eta}2 and \b{eta}4) at 1.55 micro-meter which is at the heart of the Four-Wave-Mixing (FWM) generation. For conventional highly nonlinear fiber the sensitivity of this ratio to fiber geometry f…
▽ More
We report on the conception, fabrication and characterization of a new concept of optical fiber enabling a precise control of the ratio between the 2nd and 4th-order of chromatic dispersion (respectively \b{eta}2 and \b{eta}4) at 1.55 micro-meter which is at the heart of the Four-Wave-Mixing (FWM) generation. For conventional highly nonlinear fiber the sensitivity of this ratio to fiber geometry fluctuations is very critical, making the fabrication process challenging. The new design fiber reconciles the accurate control of chromatic dispersion properties and fabrication by standard stack and draw method, allowing a robust and reliable method against detrimental fluctuations parameters during the fabrication process. Experimental frequency conversion with FWM in the new design fiber is demonstrated.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Train Small, Model Big: Scalable Physics Simulators via Reduced Order Modeling and Domain Decomposition
Authors:
Seung Whan Chung,
Youngsoo Choi,
Pratanu Roy,
Thomas Moore,
Thomas Roy,
Tiras Y. Lin,
Du Y. Nguyen,
Christopher Hahn,
Eric B. Duoss,
Sarah E. Baker
Abstract:
Numerous cutting-edge scientific technologies originate at the laboratory scale, but transitioning them to practical industry applications is a formidable challenge. Traditional pilot projects at intermediate scales are costly and time-consuming. An alternative, the E-pilot, relies on high-fidelity numerical simulations, but even these simulations can be computationally prohibitive at larger scale…
▽ More
Numerous cutting-edge scientific technologies originate at the laboratory scale, but transitioning them to practical industry applications is a formidable challenge. Traditional pilot projects at intermediate scales are costly and time-consuming. An alternative, the E-pilot, relies on high-fidelity numerical simulations, but even these simulations can be computationally prohibitive at larger scales. To overcome these limitations, we propose a scalable, physics-constrained reduced order model (ROM) method. ROM identifies critical physics modes from small-scale unit components, projecting governing equations onto these modes to create a reduced model that retains essential physics details. We also employ Discontinuous Galerkin Domain Decomposition (DG-DD) to apply ROM to unit components and interfaces, enabling the construction of large-scale global systems without data at such large scales. This method is demonstrated on the Poisson and Stokes flow equations, showing that it can solve equations about $15 - 40$ times faster with only $\sim$ $1\%$ relative error. Furthermore, ROM takes one order of magnitude less memory than the full order model, enabling larger scale predictions at a given memory limitation.
△ Less
Submitted 5 December, 2023;
originally announced January 2024.
-
Quantum criticality in chains of planar rotors with dipolar interactions
Authors:
Tobias Serwatka,
Pierre-Nicholas Roy
Abstract:
In this contribution we perform a density matrix renormalization group study of chains of planar rotors interacting via dipolar interactions. By exploring the ground state from weakly to strongly interacting rotors, we find the occurrence of a quantum phase transition between a disordered and a dipole-ordered quantum state. We show that the nature of the ordered state changes from ferroelectric to…
▽ More
In this contribution we perform a density matrix renormalization group study of chains of planar rotors interacting via dipolar interactions. By exploring the ground state from weakly to strongly interacting rotors, we find the occurrence of a quantum phase transition between a disordered and a dipole-ordered quantum state. We show that the nature of the ordered state changes from ferroelectric to antiferroelectric when the relative orientation of the rotor planes varies and that this change requires no modification of the overall symmetry. The observed quantum phase transitions are characterized by critical exponents and central charges which reveal different universality classes ranging from that of the (1+1)D Ising model to the 2D classical XY model.
△ Less
Submitted 5 January, 2024;
originally announced January 2024.
-
The DUNE Far Detector Vertical Drift Technology, Technical Design Report
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1304 additional authors not shown)
Abstract:
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi…
▽ More
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model.
The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise.
In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered.
This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Ultraviolet Resonant Nanogap Antennas with Rhodium Nanocube Dimers for Enhancing Protein Intrinsic Autofluorescence
Authors:
Prithu Roy,
Siyuan Zhu,
Jean-Benoît Claude,
Jie Liu,
Jérôme Wenger
Abstract:
Plasmonic optical nanoantennas offer compelling solutions for enhancing light-matter interactions at the nanoscale. However, until now, their focus has been mainly limited to the visible and near-infrared regions, overlooking the immense potential of the ultraviolet (UV) range, where molecules exhibit their strongest absorption. Here, we present the realization of UV resonant nanogap antennas cons…
▽ More
Plasmonic optical nanoantennas offer compelling solutions for enhancing light-matter interactions at the nanoscale. However, until now, their focus has been mainly limited to the visible and near-infrared regions, overlooking the immense potential of the ultraviolet (UV) range, where molecules exhibit their strongest absorption. Here, we present the realization of UV resonant nanogap antennas constructed from paired rhodium nanocubes. Rhodium emerges as a robust alternative to aluminum, offering enhanced stability in wet environments and ensuring reliable performance in the UV range. Our results showcase the nanoantenna ability to enhance the UV autofluorescence of label-free streptavidin and hemoglobin proteins. We achieve significant enhancements of the autofluorescence brightness per protein by up to 120-fold, and reach zeptoliter detection volumes enabling UV autofluorescence correlation spectroscopy (UV-FCS) at high concentrations of several tens of micromolar. We investigate the modulation of fluorescence photokinetic rates and report excellent agreement between experimental results and numerical simulations. This work expands the applicability of plasmonic nanoantennas into the deep UV range, unlocking the investigation of label-free proteins at physiological concentrations.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Near-infrared dual-comb spectroscopy of CO2 and N2O with a discretized highly nonlinear fiber
Authors:
Alix Malfondet,
Moise Deroh,
Sidi-Ely Ahmedou,
Alexandre Parriaux,
Kamal Hammani,
Romain Dauliat,
Laurent Labonté,
Sébastien Tanzilli,
Jean-Christophe Delagnes,
Philippe Roy,
Raphaël Jamier,
Guy Millot
Abstract:
In this paper, we introduce an all-fibered dual-comb spectrometer based on a new design of highly nonlinear fiber to efficiently convert frequency combs from 1.55 micron to 2 micron We show that our spectrometer can be used to measure absorption profiles of rovibrational transitions of CO2 and N2O molecules, and especially their collisional self-broadening coefficients. The results show very good…
▽ More
In this paper, we introduce an all-fibered dual-comb spectrometer based on a new design of highly nonlinear fiber to efficiently convert frequency combs from 1.55 micron to 2 micron We show that our spectrometer can be used to measure absorption profiles of rovibrational transitions of CO2 and N2O molecules, and especially their collisional self-broadening coefficients. The results show very good agreement with the HITRAN database and thus further measurements have been performed on a mixture CO2 /N2O to measure the broadening of the CO2 absorption lines resulting from the presence of N2O.
△ Less
Submitted 30 January, 2024; v1 submitted 25 July, 2023;
originally announced July 2023.
-
Storage, Accumulation and Deceleration of Secondary Beams for Nuclear Astrophysics
Authors:
J. Glorius,
Yu. A. Litvinov,
M. Aliotta,
F. Amjad,
B. Brückner,
C. G. Bruno,
R. Chen,
T. Davinson,
S. F. Dellmann,
T. Dickel,
I. Dillmann,
P. Erbacher,
O. Forstner,
H. Geissel,
C. J. Griffin,
R. Grisenti,
A. Gumberidze,
E. Haettner,
R. Hess,
P. -M. Hillenbrand,
C. Hornung,
R. Joseph,
B. Jurado,
E. Kazanseva,
R. Knöbel
, et al. (39 additional authors not shown)
Abstract:
Low-energy investigations on rare ion beams are often limited by the available intensity and purity of the ion species in focus. Here, we present the first application of a technique that combines in-flight production at relativistic energies with subsequent secondary beam storage, accumulation and finally deceleration to the energy of interest. Using the FRS and ESR facilities at GSI, this scheme…
▽ More
Low-energy investigations on rare ion beams are often limited by the available intensity and purity of the ion species in focus. Here, we present the first application of a technique that combines in-flight production at relativistic energies with subsequent secondary beam storage, accumulation and finally deceleration to the energy of interest. Using the FRS and ESR facilities at GSI, this scheme was pioneered to provide a secondary beam of $^{118}$Te$^{52+}$ for the measurement of nuclear proton-capture at energies of 6 and 7 MeV/u. The technique provided stored beam intensities of about $10^6$ ions at high purity and brilliance, representing a major step towards low-energy nuclear physics studies using rare ion beams.
△ Less
Submitted 30 May, 2023; v1 submitted 25 May, 2023;
originally announced May 2023.
-
Optimized basis sets for DMRG calculations of quantum chains of rotating water molecules
Authors:
Tobias Serwatka,
Pierre-Nicholas Roy
Abstract:
In this contribution, we employ a density matrix based optimization procedure to obtain customized basis functions to describe chains of rotating water molecules in interaction regimes associated with different intermolecular distances. This procedure is shown to yield a very compact basis with a clear truncation criterion based on the population of the single particle basis functions. For the wat…
▽ More
In this contribution, we employ a density matrix based optimization procedure to obtain customized basis functions to describe chains of rotating water molecules in interaction regimes associated with different intermolecular distances. This procedure is shown to yield a very compact basis with a clear truncation criterion based on the population of the single particle basis functions. For the water trimer, we discuss the convergence behavior of several properties and show it to be superior when compared to an energy-based truncated basis. It is demonstrated that the optimized basis reduces the necessary number of basis functions by at least an order of magnitude. Finally, the optimization procedure is employed to study larger chains of up to ten water molecules. The formation of hydrogen bonds as well as its impact on the net polarization of the chain is discussed.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Quantum Criticality and Universal Behavior in Molecular Dipolar Lattices of Endofullerenes
Authors:
Tobias Serwatka,
Pierre-Nicholas Roy
Abstract:
Fullerene cages allow the confinement of single molecules and the construction of molecular assemblies whose properties strongly deviate from those of free species. In this work, we employ the density-matrix renormalization group method to show that chains of fullerenes filled with polar molecules (LiF, HF, and H2O) can form dipole-ordered quantum phases. In symmetry broken environments, these ord…
▽ More
Fullerene cages allow the confinement of single molecules and the construction of molecular assemblies whose properties strongly deviate from those of free species. In this work, we employ the density-matrix renormalization group method to show that chains of fullerenes filled with polar molecules (LiF, HF, and H2O) can form dipole-ordered quantum phases. In symmetry broken environments, these ordered phases are ferroelectric, a property that makes them promising candidates for quantum devices. We demonstrate that for a given guest molecule, the occurrence of these quantum phases can be enforced or influenced by either changing the effective electric dipole moment or by isotopic substitution. In the ordered phase, all systems under consideration are characterized by a universal behavior that only depends on the ratio of the effective electric dipole divided by the rotational constant. A phase diagram is derived and further molecules are proposed as candidates for dipole-ordered endofullerene chains.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Determination of charge spread, position resolution, energy resolution and gain uniformity of Gas Electron Multipliers (GEM)
Authors:
Vishal Kumar,
Subhendu Das,
Promita Roy,
Purba Bhattacharyab,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Gas electron multipliers (GEM) detectors are gaseous detectors widely used for tracking and imaging applications due to their good position resolution, high efficiency at high irradiation rates, among other factors. In the present work, position resolution, charge spread, energy resolution and gain uniformity have been investigated experimentally for single and double GEM geometries using an Fe-55…
▽ More
Gas electron multipliers (GEM) detectors are gaseous detectors widely used for tracking and imaging applications due to their good position resolution, high efficiency at high irradiation rates, among other factors. In the present work, position resolution, charge spread, energy resolution and gain uniformity have been investigated experimentally for single and double GEM geometries using an Fe-55 source. The position resolution measurements have been performed by a novel method, using a high precision instrument for source movement and is found to be highly successful. The result shows that the double GEM can resolve positions with sigma values up to 36.8 micron and 54.6 micron in x and y directions, respectively. To validate the experimental results, a Garfield simulation work has been carried out on charge spread.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
Achieving High Temporal Resolution in Single-Molecule Fluorescence Techniques using Plasmonic Nanoantennas
Authors:
Sunny Tiwari,
Prithu Roy,
Jean-Benoît Claude,
Jérôme Wenger
Abstract:
Single-molecule fluorescence techniques are essential for investigating the molecular mechanisms in biological processes. However, achieving sub-millisecond temporal resolution to monitor fast molecular dynamics remains a significant challenge. The fluorescence brightness is the key parameter that generally defines the temporal resolution for these techniques. Conventional microscopes and standard…
▽ More
Single-molecule fluorescence techniques are essential for investigating the molecular mechanisms in biological processes. However, achieving sub-millisecond temporal resolution to monitor fast molecular dynamics remains a significant challenge. The fluorescence brightness is the key parameter that generally defines the temporal resolution for these techniques. Conventional microscopes and standard fluorescent emitters fall short in achieving the high brightness required for sub-millisecond monitoring. Plasmonic nanoantennas have been proposed as a solution, but despite huge fluorescence enhancement have been obtained with these structures, the brightness generally remains below 1 million photons/s/molecule. Therefore, the improvement of temporal resolution has been overlooked. In this article, we present a method for achieving high temporal resolution in single-molecule fluorescence techniques using plasmonic nanoantennas, specifically optical horn antennas. We demonstrate about 90% collection efficiency of the total emitted light, reaching a high fluorescence brightness of 2 million photons/s/molecule in the saturation regime. This enables observations of single molecules with microsecond binning time and fast fluorescence correlation spectroscopy (FCS) measurements. This work expands the applications of plasmonic antennas and zero-mode waveguides in the fluorescence saturation regime towards brighter single-molecule signal, faster temporal resolutions and improved detection rates to advance fluorescence sensing, DNA sequencing and dynamic studies of molecular interactions.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Ultraviolet Nanophotonics Enables Autofluorescence Correlation Spectroscopy on Label-Free Proteins With a Single Tryptophan
Authors:
Prithu Roy,
Jean-Benoît Claude,
Sunny Tiwari,
Aleksandr Barulin,
Jérôme Wenger
Abstract:
Using the ultraviolet autofluorescence of tryptophan aminoacids offers fascinating perspectives to study single proteins without the drawbacks of fluorescence labelling. However, the low autofluorescence signals have so far limited the UV detection to large proteins containing several tens of tryptophan residues. This limit is not compatible with the vast majority of proteins which contain only a…
▽ More
Using the ultraviolet autofluorescence of tryptophan aminoacids offers fascinating perspectives to study single proteins without the drawbacks of fluorescence labelling. However, the low autofluorescence signals have so far limited the UV detection to large proteins containing several tens of tryptophan residues. This limit is not compatible with the vast majority of proteins which contain only a few tryptophans. Here we push the sensitivity of label-free ultraviolet fluorescence correlation spectroscopy (UV-FCS) down to the single tryptophan level. Our results show how the combination of nanophotonic plasmonic antennas, antioxidants and background reduction techniques can improve the signal-to-background ratio by over an order of magnitude and enable UV-FCS on thermonuclease proteins with a single tryptophan residue. This sensitivity breakthrough unlocks the applicability of UV-FCS technique to a broad library of label-free proteins.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1235 additional authors not shown)
Abstract:
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is…
▽ More
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.
△ Less
Submitted 31 May, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Design and studies of thick Gas Electron Multipliers fabricated in India
Authors:
Promita Roy,
Purba Bhattacharya,
Vishal Kumar,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
THick Gas Electron Multipliers (THGEMs) are robust and high gain Micro Pattern Gaseous Detectors which are economically manufactured by standard drilling and etching of thin printed circuit boards. In this paper, we present our recent simulation as well as experimental studies on THGEMs which have been fabricated in India using local expertise. Two types of THGEMs have been fabricated; one set has…
▽ More
THick Gas Electron Multipliers (THGEMs) are robust and high gain Micro Pattern Gaseous Detectors which are economically manufactured by standard drilling and etching of thin printed circuit boards. In this paper, we present our recent simulation as well as experimental studies on THGEMs which have been fabricated in India using local expertise. Two types of THGEMs have been fabricated; one set has holes without any external rim and another set has holes with rims. These detectors have been characterized using argon-carbon dioxide and argon-isobutane gas mixtures. Electron transmission, effective gain, energy resolution and optimized working range studies have been presented for both the sets of THGEMs.
△ Less
Submitted 17 December, 2022; v1 submitted 19 October, 2022;
originally announced October 2022.
-
A quantum phase transition in the one-dimensional water chain
Authors:
Tobias Serwatka,
Roger G. Melko,
Anton Burkov,
Pierre-Nicholas Roy
Abstract:
The concept of quantum phase transitions (QPT) plays a central role in the description of condensed matter systems. In this contribution, we perform high-quality wavefunction-based simulations to demonstrate the existence of a quantum phase transition in a crucially relevant molecular system, namely water, forming linear chains of rotating molecules. We determine various critical exponents and rev…
▽ More
The concept of quantum phase transitions (QPT) plays a central role in the description of condensed matter systems. In this contribution, we perform high-quality wavefunction-based simulations to demonstrate the existence of a quantum phase transition in a crucially relevant molecular system, namely water, forming linear chains of rotating molecules. We determine various critical exponents and reveal the water chain QPT to belong to the (1+1) dimensional Ising universality class. Furthermore, the effect of breaking symmetries is examined and it is shown that by breaking the inversion symmetry, the ground state degeneracy of the ordered quantum phase is lifted to yield two many-body states with opposite polarization. The possibility of forming ferroelectric phases together with a thermal stability of the quantum critical regime up to ~10 K makes the linear water chain a promising candidate as a platform for quantum devices.
△ Less
Submitted 10 November, 2022; v1 submitted 14 October, 2022;
originally announced October 2022.
-
LANSCE Digital Low Level RF Upgrade
Authors:
P. Van Rooy,
M. Prokop,
S. Kwon,
P. Torrez,
L. Castellano,
A. Archuleta,
C. Marchwinski
Abstract:
Incremental upgrades of the legacy low level RF (LLRF) equipment-50 years for the Los Alamos Neutron Science Center (LANSCE)-involves challenges and problems not seen with new and total replacement opportunities. The digital LLRF upgrade at LANSCE has deployed 30 of the 53 required systems as of September 2022. This paper describes the performance of the digital upgrade, current status, and future…
▽ More
Incremental upgrades of the legacy low level RF (LLRF) equipment-50 years for the Los Alamos Neutron Science Center (LANSCE)-involves challenges and problems not seen with new and total replacement opportunities. The digital LLRF upgrade at LANSCE has deployed 30 of the 53 required systems as of September 2022. This paper describes the performance of the digital upgrade, current status, and future installations along with the technical challenges, including unexpected challenges, associated with deploying new digital systems in conjunction with legacy analog equipment. In addition, this paper discusses the operational details of simultaneous multi-energy beam operations using high energy re-bunching, beam-type specific set points and simultaneous multi-beam operations at LANSCE. The adaptability of the digital LLRF systems is essential as the design is able to accommodate new control and beam parameters associated with future systems without significant hardware modifications such as the expected LANSCE Modernization Program. This adaptability of the digital LLRF technology was recently demonstrated with the Module 1, 201.25-MHz high-power RF upgrade completed in 2021.
△ Less
Submitted 27 October, 2022; v1 submitted 12 October, 2022;
originally announced October 2022.
-
Disturbance Observer Application for the Compensation of the Phase Drift of the LANSCE DTL LINAC Solid State Power Amplifier
Authors:
Sungil Kwon,
M. S. Barrueta,
L. Castellano,
J. M. Lyles,
M. Prokop,
P. Van Rooy,
P. Torrez
Abstract:
The front end of Los Alamos Neutron Science Center (LANSCE) linear accelerator uses four 201.25-MHz Drift-Tube Linacs (DTLs) to accelerate the H+ and H- beams to 100 MeV. Three of the 201.25-MHz DTLs are powered by diacrodes and the first DTL is powered by a tetrode. A 20-kW solid-state power amplifier (SSPA) is used to provide ~15 kW drive power to the tetrode. The SSPA is water-cooled and consis…
▽ More
The front end of Los Alamos Neutron Science Center (LANSCE) linear accelerator uses four 201.25-MHz Drift-Tube Linacs (DTLs) to accelerate the H+ and H- beams to 100 MeV. Three of the 201.25-MHz DTLs are powered by diacrodes and the first DTL is powered by a tetrode. A 20-kW solid-state power amplifier (SSPA) is used to provide ~15 kW drive power to the tetrode. The SSPA is water-cooled and consists of 24 push-pull LDMOS transistors operating at 45% of their power saturation capability, providing ample power headroom and excellent linearity. However, the phase of the SSPA is perturbed at +/-20 degrees over a few ten minutes partially caused by the temperature dependent phase variation of the air-cooled SSPA driver circulator. This phase variation consumes most of the phase control margin of the cavity field feedback controller. In order to mitigate the effect of the SSPA phase variation on the cavity field, a disturbance observer controller (DOBC) has been designed and implemented on the cavity field control FPGA, which functions in parallel with the cavity field feedback controller. In this paper, the DOBC design and its function as well as its short- and long-term performance are addressed.
△ Less
Submitted 14 November, 2022; v1 submitted 11 October, 2022;
originally announced October 2022.
-
MATLAB Scripts for RF Commissioning at the LANSCE LINAC
Authors:
Sungil Kwon,
A. Archuleta,
L. Castellano,
C. Marchwinski,
M. Prokop,
P. Van Rooy,
P. Torrez
Abstract:
The linear accelerator (LINAC) at the Los Alamos Neu-tron Science Center (LANSCE) consists of Pre-buncher, Main-Buncher, low-energy beam transport (LEBT), four 201.25-MHz Drift Tube Linacs (DTLs) and forty-four 805-MHz Coupled Cavity Linacs (CCLs). As a part of the upcoming LANSCE Modernization project, low-level RF (LLRF) systems of four 201-MHz DTLs and twenty-six 805-MHz SCLs have been digitize…
▽ More
The linear accelerator (LINAC) at the Los Alamos Neu-tron Science Center (LANSCE) consists of Pre-buncher, Main-Buncher, low-energy beam transport (LEBT), four 201.25-MHz Drift Tube Linacs (DTLs) and forty-four 805-MHz Coupled Cavity Linacs (CCLs). As a part of the upcoming LANSCE Modernization project, low-level RF (LLRF) systems of four 201-MHz DTLs and twenty-six 805-MHz SCLs have been digitized. Hence the net-work-based control of the cavity field and RF commis-sioning are possible. Each LLRF and high-power RF (HPRF) systems have many process variables (PVs) lo-cated on different computer control screens provided by the Extensible Display Manager (EDM). Several MATLAB m-scripts have been developed to efficiently process the necessary PVs while auto-start, ampli-tude/phase calibration, gain tuning of the cavity field feedback controllers, gain and phase tuning of the beam feedforward controllers, and high power RF trip recovery, processes are configured and validated. This paper ad-dresses the sequence of RF commissioning of the LANSCE LINAC from the time of RF-turn-on to beam feedforward control and its relevant EDMs and MATLAB m-scripts.
△ Less
Submitted 14 November, 2022; v1 submitted 11 October, 2022;
originally announced October 2022.
-
Study of space charge phenomena in GEM-based detectors
Authors:
Promita Roy,
Prasant Kumar Rout,
Jaydeep Datta,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Space charge accumulation within GEM holes is one of the vital phenomena which affects many of the key working parameters of the detector. This accumulation is found to be significantly affected by the initial primary charge configurations and applied GEM voltages since they determine charge sharing and the subsequent evolution of detector response. In this work, we have studied the effects of spa…
▽ More
Space charge accumulation within GEM holes is one of the vital phenomena which affects many of the key working parameters of the detector. This accumulation is found to be significantly affected by the initial primary charge configurations and applied GEM voltages since they determine charge sharing and the subsequent evolution of detector response. In this work, we have studied the effects of space charge phenomena on different parameters for single GEM detectors using a hybrid numerical model.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
Influence of the coordination defects on the dynamics and the potential energy landscape of two-dimensional silica
Authors:
Projesh Kumar Roy,
Andreas Heuer
Abstract:
The main cause of the fragile-to-strong crossover of 3D silica was previously attributed to the presence of a low energy cutoff in the potential energy landscape. The important question emerges about the microscopic origin of this crossover and the generalizibility to other glass-formers. In this work, the fragile-to-strong crossover of a model 2D glassy system is analyzed via molecular dynamics s…
▽ More
The main cause of the fragile-to-strong crossover of 3D silica was previously attributed to the presence of a low energy cutoff in the potential energy landscape. The important question emerges about the microscopic origin of this crossover and the generalizibility to other glass-formers. In this work, the fragile-to-strong crossover of a model 2D glassy system is analyzed via molecular dynamics simulation, which represents 2D-silica. By separating the sampled defect and defect-free inherent structures, we are able to identify their respective density of state distributions with respect to energy. A low energy cutoff is found in both distributions. It is shown that the fragile-to-strong crossover can be quantitatively related to the parameters of the energy landscape, involving in particular the low-energy cutoff of the energy distribution. It is also shown that the low-energy cutoff of the defect-states is determined by the formation energy of a specific defect configuration, involving two silicon and no oxygen defect. The low-temperature behavior of 2D silica is quantitatively compared with that of 3D silica, showing surprisingly similar behavior.
△ Less
Submitted 14 October, 2022; v1 submitted 1 August, 2022;
originally announced August 2022.
-
The Profiled Feldman-Cousins technique for confidence interval construction in the presence of nuisance parameters
Authors:
M. A. Acero,
B. Acharya,
P. Adamson,
L. Aliaga,
N. Anfimov,
A. Antoshkin,
E. Arrieta-Diaz,
L. Asquith,
A. Aurisano,
A. Back,
C. Backhouse,
M. Baird,
N. Balashov,
P. Baldi,
B. A. Bambah,
S. Bashar,
A. Bat,
K. Bays,
R. Bernstein,
V. Bhatnagar,
D. Bhattarai,
B. Bhuyan,
J. Bian,
A. C. Booth,
R. Bowles
, et al. (196 additional authors not shown)
Abstract:
Measuring observables to constrain models using maximum-likelihood estimation is fundamental to many physics experiments. The Profiled Feldman-Cousins method described here is a potential solution to common challenges faced in constructing accurate confidence intervals: small datasets, bounded parameters, and the need to properly handle nuisance parameters. This method achieves more accurate frequ…
▽ More
Measuring observables to constrain models using maximum-likelihood estimation is fundamental to many physics experiments. The Profiled Feldman-Cousins method described here is a potential solution to common challenges faced in constructing accurate confidence intervals: small datasets, bounded parameters, and the need to properly handle nuisance parameters. This method achieves more accurate frequentist coverage than other methods in use, and is generally applicable to the problem of parameter estimation in neutrino oscillations and similar measurements. We describe an implementation of this method in the context of the NOvA experiment.
△ Less
Submitted 1 August, 2022; v1 submitted 28 July, 2022;
originally announced July 2022.
-
Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
B. Ali-Mohammadzadeh,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo
, et al. (1203 additional authors not shown)
Abstract:
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char…
▽ More
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation.
△ Less
Submitted 17 July, 2023; v1 submitted 29 June, 2022;
originally announced June 2022.
-
Hybrid Transformer Network for Different Horizons-based Enriched Wind Speed Forecasting
Authors:
Dr. M. Madhiarasan,
Prof. Partha Pratim Roy
Abstract:
Highly accurate different horizon-based wind speed forecasting facilitates a better modern power system. This paper proposed a novel astute hybrid wind speed forecasting model and applied it to different horizons. The proposed hybrid forecasting model decomposes the original wind speed data into IMFs (Intrinsic Mode Function) using Improved Complete Ensemble Empirical Mode Decomposition with Adapt…
▽ More
Highly accurate different horizon-based wind speed forecasting facilitates a better modern power system. This paper proposed a novel astute hybrid wind speed forecasting model and applied it to different horizons. The proposed hybrid forecasting model decomposes the original wind speed data into IMFs (Intrinsic Mode Function) using Improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (ICEEMDAN). We fed the obtained subseries from ICEEMDAN to the transformer network. Each transformer network computes the forecast subseries and then passes to the fusion phase. Get the primary wind speed forecasting from the fusion of individual transformer network forecast subseries. Estimate the residual error values and predict errors using a multilayer perceptron neural network. The forecast error is added to the primary forecast wind speed to leverage the high accuracy of wind speed forecasting. Comparative analysis with real-time Kethanur, India wind farm dataset results reveals the proposed ICEEMDAN-TNF-MLPN-RECS hybrid model's superior performance with MAE=1.7096*10^-07, MAPE=2.8416*10^-06, MRE=2.8416*10^-08, MSE=5.0206*10^-14, and RMSE=2.2407*10^-07 for case study 1 and MAE=6.1565*10^-07, MAPE=9.5005*10^-06, MRE=9.5005*10^-08, MSE=8.9289*10^-13, and RMSE=9.4493*10^-07 for case study 2 enriched wind speed forecasting than state-of-the-art methods and reduces the burden on the power system engineer.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Ultraviolet optical horn antennas for label-free detection of single proteins
Authors:
Aleksandr Barulin,
Prithu Roy,
Jean-Benoît Claude,
Jérôme Wenger
Abstract:
Single-molecule fluorescence techniques have revolutionized our ability to study proteins. However, the presence of a fluorescent label can alter the protein structure and/or modify its reaction with other species. To avoid the need for a fluorescent label, the intrinsic autofluorescence of proteins in the ultraviolet offers the benefits of fluorescence techniques without introducing the labelling…
▽ More
Single-molecule fluorescence techniques have revolutionized our ability to study proteins. However, the presence of a fluorescent label can alter the protein structure and/or modify its reaction with other species. To avoid the need for a fluorescent label, the intrinsic autofluorescence of proteins in the ultraviolet offers the benefits of fluorescence techniques without introducing the labelling drawbacks. Unfortunately, the low autofluorescence brightness of proteins has greatly challenged single molecule detection so far. Here we introduce optical horn antennas, a dedicated nanophotonic platform enabling the label-free detection of single proteins in the UV. This design combines fluorescence plasmonic enhancement, efficient collection up to 85{\textdegree} angle and background screening. We detect the UV autofluorescence from immobilized and diffusing single proteins, and monitor protein unfolding and dissociation upon denaturation. Optical horn antennas open up a unique and promising form of fluorescence spectroscopy to investigate single proteins in their native states in real time.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1204 additional authors not shown)
Abstract:
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det…
▽ More
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation.
△ Less
Submitted 30 June, 2022; v1 submitted 31 March, 2022;
originally announced March 2022.
-
Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1202 additional authors not shown)
Abstract:
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and…
▽ More
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties
△ Less
Submitted 3 June, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Derivation of a statistical model for classical systems obeying fractional exclusion principle
Authors:
Projesh Kumar Roy
Abstract:
The violation of the Pauli principle has been surmised in several models of the Fractional Exclusion Statistics and successfully applied to several quantum systems. In this paper, a classical alternative of the exclusion statistics is studied using the maximum entropy methods. The difference between the Bose-Einstein statistics and the Maxwell-Boltzmann statistics is understood in terms of a separ…
▽ More
The violation of the Pauli principle has been surmised in several models of the Fractional Exclusion Statistics and successfully applied to several quantum systems. In this paper, a classical alternative of the exclusion statistics is studied using the maximum entropy methods. The difference between the Bose-Einstein statistics and the Maxwell-Boltzmann statistics is understood in terms of a separable quantity, namely the degree of indistinguishability. Starting from the usual Maxwell-Boltzmann microstate counting formula, a special restriction related to the degree of indistinguishability is incorporated using Lagrange multipliers to derive the probability distribution function at equilibrium under NVE conditions. It is found that the resulting probability distribution function generates real positive values within the permissible range of parameters. For a dilute system, the probability distribution function is intermediate between the Fermi-Dirac and Bose-Einstein statistics and follows the exclusion principle. Properties of various variables of this novel statistical model are studied and possible application to classical thermodynamics is discussed.
△ Less
Submitted 14 October, 2022; v1 submitted 21 March, 2022;
originally announced March 2022.
-
Effect of hole geometry on charge sharing and other parameters in GEM-based detectors
Authors:
Promita Roy,
Purba Bhattacharya,
Prasant Kumar Rout,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Gas Electron Multipliers (GEM) are among the more prominent Micro-Pattern Gaseous Detectors (MPGDs) and widely used in high energy particle physics experiments and various related applications. Adoption of different production techniques lead to holes of varying geometries in GEM foils. Since the response of a GEM-based detector is closely related to the hole geometry through the influence of the…
▽ More
Gas Electron Multipliers (GEM) are among the more prominent Micro-Pattern Gaseous Detectors (MPGDs) and widely used in high energy particle physics experiments and various related applications. Adoption of different production techniques lead to holes of varying geometries in GEM foils. Since the response of a GEM-based detector is closely related to the hole geometry through the influence of the latter on charge sharing and transport through GEM foils, attempts have been made to relate hole configurations to different figures of merit of a detector. Numerical simulations have been performed to study the effects of hole geometry on important parameters such as charge sharing, collection efficiency, extraction efficiency, gain, possibility of transition from avalanche to streamer modes for single, double and triple layer GEM detectors. The numerical estimates have been compared to available experimental data. The comparisons, although not always in agreement, are found to be generally encouraging.
△ Less
Submitted 5 March, 2024; v1 submitted 23 December, 2021;
originally announced December 2021.
-
Quantum-limited determination of refractive index difference by means of entanglement
Authors:
Mattis Reisner,
Florent Mazeas,
Romain Dauliat,
Baptiste Leconte,
Djeylan Aktas,
Rachel Cannon,
Philippe Roy,
Raphael Jamier,
Gregory Sauder,
Florian Kaiser,
Sébastien Tanzilli,
Laurent Labonté
Abstract:
Sha** single-mode operation in high-power fibres requires a precise knowledge of the gain-medium optical properties. This requires accurate measurements of the refractive index differences ($Δ$n) between the core and the cladding of the fiber. We exploit a quantum optical method based on low-coherence Hong-Ou-Mandel interferometry to perform practical measurements of the refractive index differe…
▽ More
Sha** single-mode operation in high-power fibres requires a precise knowledge of the gain-medium optical properties. This requires accurate measurements of the refractive index differences ($Δ$n) between the core and the cladding of the fiber. We exploit a quantum optical method based on low-coherence Hong-Ou-Mandel interferometry to perform practical measurements of the refractive index difference using broadband energy-time entangled photons. The precision enhancement reached with this method is benchmarked with a classical method based on single photon interferometry. We show in classical regime an improvement by an order of magnitude of the precision compared to already reported classical methods. Strikingly, in the quantum regime, we demonstrate an extra factor of 4 on the accuracy enhancement, exhibiting a state-of-the-art $Δ$n precision of $6.10^{-7}$. This work sets the quantum photonics metrology as a powerful characterization tool that should enable a faster and reliable design of materials dedicated to light amplification.
△ Less
Submitted 21 October, 2021;
originally announced October 2021.
-
Novel triple barrier potential for axial gravitational perturbations of a family of Lorentzian wormholes
Authors:
Poulami Dutta Roy
Abstract:
We study the behavior of a specific Lorentzian wormhole family under gravitational perturbations. In earlier work [EPJC 80, 850 (2020)], we have proved the stability of a test scalar field in the background of the wormhole family, where the effective potential was that of a double barrier. Continuing with the stability analysis, here we focus on the more physically relevant scenario, that of axial…
▽ More
We study the behavior of a specific Lorentzian wormhole family under gravitational perturbations. In earlier work [EPJC 80, 850 (2020)], we have proved the stability of a test scalar field in the background of the wormhole family, where the effective potential was that of a double barrier. Continuing with the stability analysis, here we focus on the more physically relevant scenario, that of axial gravitational perturbations. Interestingly, we find that the effective potential is a triple barrier for lower angular momentum modes. This raises important questions on the ringdown of the corresponding wormhole geometry as well as the gravitational wave echo profile that we try to answer through our work. We study in detail how the geometry of each member wormhole affects the quasinormal modes, the time evolution of the signal as well as echoes which are, in general, very feeble in comparison to the main signal. Different `cleaning' techniques have been used to obtain the echo profile in the time evolution of the signal. Lastly, we dwell on the possibility of our wormhole family as a candidate black hole mimicker, as long as its stability is proven under all kinds of perturbations. We briefly present a comparison of the ringdown characteristics of these wormholes with that of a black hole, in support of this speculation.
△ Less
Submitted 12 August, 2022; v1 submitted 11 October, 2021;
originally announced October 2021.
-
Characterization of Muon and Electron Beams in the Paul Scherrer Institute PiM1 Channel for the MUSE Experiment
Authors:
E. Cline,
W. Lin,
P. Roy,
P. E. Reimer,
K. E. Mesick,
A. Akmal,
A. Alie,
H. Atac,
A. Atencio,
C. Ayerbe Gayoso,
N. Benmouna,
F. Benmokhtar,
J. C. Bernauer,
W. J. Briscoe,
J. Campbell,
D. Cohen,
E. O. Cohen,
C. Collicott,
K. Deiters,
S. Dogra,
E. Downie,
I. P. Fernando,
A. Flannery,
T. Gautam,
D. Ghosal
, et al. (35 additional authors not shown)
Abstract:
The MUon Scattering Experiment, MUSE, at the Paul Scherrer Institute, Switzerland, investigates the proton charge radius puzzle, lepton universality, and two-photon exchange, via simultaneous measurements of elastic muon-proton and electron-proton scattering. The experiment uses the PiM1 secondary beam channel, which was designed for high precision pion scattering measurements. We review the prope…
▽ More
The MUon Scattering Experiment, MUSE, at the Paul Scherrer Institute, Switzerland, investigates the proton charge radius puzzle, lepton universality, and two-photon exchange, via simultaneous measurements of elastic muon-proton and electron-proton scattering. The experiment uses the PiM1 secondary beam channel, which was designed for high precision pion scattering measurements. We review the properties of the beam line established for pions. We discuss the production processes that generate the electron and muon beams, and the simulations of these processes. Simulations of the $π$/$μ$/$e$ beams through the channel using TURTLE and G4beamline are compared. The G4beamline simulation is then compared to several experimental measurements of the channel, including the momentum dispersion at the IFP and target, the shape of the beam spot at the target, and timing measurements that allow the beam momenta to be determined. We conclude that the PiM1 channel can be used for high precision $π$, $μ$, and $e$ scattering.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1132 additional authors not shown)
Abstract:
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t…
▽ More
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Single Photon Source from a Nanoantenna-Trapped Single Quantum Dot
Authors:
Quanbo Jiang,
Prithu Roy,
Jean-Benoît Claude,
Jérôme Wenger
Abstract:
Single photon sources with high brightness and subnanosecond lifetimes are key components for quantum technologies. Optical nanoantennas can enhance the emission properties of single quantum emitters, but this approach requires accurate nanoscale positioning of the source at the plasmonic hotspot. Here, we use plasmonic nanoantennas to simultaneously trap single colloidal quantum dots and enhance…
▽ More
Single photon sources with high brightness and subnanosecond lifetimes are key components for quantum technologies. Optical nanoantennas can enhance the emission properties of single quantum emitters, but this approach requires accurate nanoscale positioning of the source at the plasmonic hotspot. Here, we use plasmonic nanoantennas to simultaneously trap single colloidal quantum dots and enhance their photoluminescence. The nano-optical trap** automatically locates the quantum emitter at the nanoantenna hotspot without further processing. Our dedicated nanoantenna design achieves a high trap stiffness of 0.6 fN/nm/mW for quantum dot trap**, together with a relatively low trap** power of 2 mW/$μ$m$^2$. The emission from the nanoantenna-trapped single quantum dot shows 7x increased brightness, 50x reduced blinking, 2x shortened lifetime and a clear antibunching below 0.5 demonstrating true single photon emission. Combining nano-optical tweezers with plasmonic enhancement is a promising route for quantum technologies and spectroscopy of single nano-objects.
△ Less
Submitted 14 August, 2021;
originally announced August 2021.
-
Thermophoretic Levitation of Solid Particles at Atmospheric Pressure
Authors:
Pritam Kumar Roy,
Irina Legchenkova,
Leonid A. Dombrovsky,
Vladimir Yu. Levashov,
Alexei P. Kryukov,
Bernard P. Binks,
Nir Shvalb,
Shraga Shoval,
Viktor Valtsifer,
Edward Bormashenko
Abstract:
Separation and transportation of small particles are important processes in various applications such as the food and pharmaceutical industries. Although mechanical, chemical or electrical methods can provide possible solutions, operational or environmental constraints may require alternative methods. Spreading and levitation of clusters (aggregates) of fumed silica nanoparticles placed under atmo…
▽ More
Separation and transportation of small particles are important processes in various applications such as the food and pharmaceutical industries. Although mechanical, chemical or electrical methods can provide possible solutions, operational or environmental constraints may require alternative methods. Spreading and levitation of clusters (aggregates) of fumed silica nanoparticles placed under atmospheric pressure on a hot plate is reported. In a closed chamber, the particles started to spread horizontally at the threshold temperature of $T_c^*=403 \pm 1$K. The powder spreading in the chamber continued until the temperature-dependent saturation value $r_{sat} (T)$, which grew linearly with the temperature. Open space experiments clearly demonstrated levitation of the powder clouds. The onset of levitation in the open space corresponded to the minimal threshold temperature of $T_o^*=373 \pm 1$K. Qualitative physical analysis of the observed phenomena is suggested. The effect of levitation is explained by the lifting thermo-phoretic force emerging in the Knudsen layer of air on the heater surface. The levitation of the powder under atmospheric pressure becomes possible due to the combination of low adhesion of the fluorinated fumed silica clusters built of nanoparticles to the substrate, relatively low density of the particles and clusters, and their high specific surface area. Ordering of the aggregates of nanoparticles within the levitating powder cloud was quantified with Voronoi diagrams.
△ Less
Submitted 5 August, 2021;
originally announced August 2021.
-
Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti,
M. P. Andrews
, et al. (1158 additional authors not shown)
Abstract:
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.…
▽ More
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components.
△ Less
Submitted 23 September, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
Purcell radiative rate enhancement of label-free proteins with ultraviolet aluminum plasmonics
Authors:
Aleksandr Barulin,
Prithu Roy,
Jean-Benoît Claude,
Jérôme Wenger
Abstract:
The vast majority of proteins are intrinsically fluorescent in the ultraviolet, thanks to the emission from their tryptophan and tyrosine amino-acid constituents. However, the protein autofluorescence quantum yields are generally very low due to the prevailing quenching mechanisms by other amino acids inside the protein. This motivates the interest to enhance the radiative emission rate of protein…
▽ More
The vast majority of proteins are intrinsically fluorescent in the ultraviolet, thanks to the emission from their tryptophan and tyrosine amino-acid constituents. However, the protein autofluorescence quantum yields are generally very low due to the prevailing quenching mechanisms by other amino acids inside the protein. This motivates the interest to enhance the radiative emission rate of proteins using nanophotonic structures. Although there have been numerous reports of Purcell effect and local density of optical states (LDOS) control in the visible range using single dipole quantum emitters, the question remains open to apply these concepts in the UV on real proteins containing several tryptophan and tyrosine amino acids arranged in a highly complex manner. Here, we report the first complete characterization of the Purcell effect and radiative rate enhancement for the UV intrinsic fluorescence of label-free \b{eta}-galactosidase and streptavidin proteins in plasmonic aluminum nanoapertures. We find an excellent agreement with a calibration performed using a high quantum yield UV fluorescent dye. Demonstrating and intensifying the Purcell effect is essential for the applications of UV plasmonics and the label-free detection of single proteins.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Preventing Corrosion of Aluminum Metal with Nanometer-Thick Films of Al2O3 Capped with TiO2 for Ultraviolet Plasmonics
Authors:
Prithu Roy,
Clémence Badie,
Jean-Benoît Claude,
Aleksandr Barulin,
Antonin Moreau,
Julien Lumeau,
Marco Abbarchi,
Lionel Santinacci,
Jérôme Wenger
Abstract:
Extending plasmonics into the ultraviolet range imposes the use of aluminum to achieve the best optical performance. However, water corrosion is a major limiting issue for UV aluminum plasmonics, as this phenomenon occurs significantly faster in presence of UV light, even at low laser powers of a few microwatts. Here we assess the performance of nanometer-thick layers of various metal oxides depos…
▽ More
Extending plasmonics into the ultraviolet range imposes the use of aluminum to achieve the best optical performance. However, water corrosion is a major limiting issue for UV aluminum plasmonics, as this phenomenon occurs significantly faster in presence of UV light, even at low laser powers of a few microwatts. Here we assess the performance of nanometer-thick layers of various metal oxides deposited by atomic layer deposition (ALD) and plasma-enhanced chemical vapor deposition (PECVD) on top of aluminum nanoapertures to protect the metal against UV photocorrosion. The combination of a 5 nm Al2O3 layer covered by a 5 nm TiO2 cap** provides the best resistance performance, while a single 10 nm layer of SiO2 or HfO2 is a good alternative. We also report the influence of the laser wavelength, the laser operation mode and the pH of the solution. Properly choosing these conditions significantly extends the range of optical powers for which the aluminum nanostructures can be used. As application, we demonstrate the label-free detection of streptavidin proteins with improved signal to noise ratio. Our approach is also beneficial to promote the long-term stability of the aluminum nanostructures. Finding the appropriate nanoscale protection against aluminum corrosion is the key to enable the development of UV plasmonic applications in chemistry and biology.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
MCBTE: A variance-reduced Monte Carlo solution of the linearized Boltzmann transport equation for phonons
Authors:
Abhishek Pathak,
Avinash Pawnday,
Aditya Prasad Roy,
Amjad J. Aref,
Gary F. Dargush,
Dipanshu Bansal
Abstract:
MCBTE solves the linearized Boltzmann transport equation for phonons in three dimensions using a variance-reduced Monte Carlo solution approach. The algorithm is suited for both transient and steady-state analysis of thermal transport in structured materials with size features in the nanometer to hundreds of microns range. The code is portable and integrated with both first-principles density func…
▽ More
MCBTE solves the linearized Boltzmann transport equation for phonons in three dimensions using a variance-reduced Monte Carlo solution approach. The algorithm is suited for both transient and steady-state analysis of thermal transport in structured materials with size features in the nanometer to hundreds of microns range. The code is portable and integrated with both first-principles density functional theory calculations and empirical relations for the input of phonon frequency, group velocity, and mean free path required for calculating the thermal properties. The program outputs space- and time-resolved temperature and heat flux for the transient study. For the steady-state simulations, the frequency-resolved contribution of phonons to temperature and heat flux is written to the output files, thus allowing the study of cumulative thermal conductivity as a function of phonon frequency or mean free path. We provide several illustrative examples, including ballistic and quasi-ballistic thermal transport, the thermal conductivity of thin films and periodic nanostructures, to demonstrate the functionality and to benchmark our code against available theoretical/analytical/computational results from the literature. Moreover, we parallelize the code using the Matlab Distributed Computing Server, providing near-linear scaling with the number of processors.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
-
Deep Underground Neutrino Experiment (DUNE) Near Detector Conceptual Design Report
Authors:
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
Z. Ahmad,
J. Ahmed,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. P. Andrews,
F. Andrianala,
S. Andringa,
N. Anfimov,
A. Ankowski,
M. Antonova,
S. Antusch
, et al. (1041 additional authors not shown)
Abstract:
This report describes the conceptual design of the DUNE near detector
This report describes the conceptual design of the DUNE near detector
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Numerical estimation of discharge probability in GEM-based detectors
Authors:
Prasant Kumar Rout,
R. Kanishka,
Jaydeep Datta,
Promita Roy,
Purba Bhattacharya,
Supratik Mukhopadhyay,
Nayana Majumdar,
Sandip Sarkar
Abstract:
Discharge probability in GEM-based gaseous detectors has been numerically estimated using an axisymmetric hydrodynamic model. Initial primary charge configurations in the drift region, obtained using Heed and Geant4, are found to have significant effect on the subsequent evolution of detector response. Simulation of energy resolution has been performed to establish the capability of the hydrodynam…
▽ More
Discharge probability in GEM-based gaseous detectors has been numerically estimated using an axisymmetric hydrodynamic model. Initial primary charge configurations in the drift region, obtained using Heed and Geant4, are found to have significant effect on the subsequent evolution of detector response. Simulation of energy resolution has been performed to establish the capability of the hydrodynamic model to capture statistical nature of the experimental situation. Finally, single and triple GEM configurations exposed to alpha sources have been simulated to estimate discharge probability which have been compared with available experimental data. Despite the simplifying and drastic assumptions in the numerical model, the comparisons are encouraging.
△ Less
Submitted 13 August, 2021; v1 submitted 23 March, 2021;
originally announced March 2021.
-
Tamm Cavity in the Terahertz Spectral Range
Authors:
Simon Messelot,
Clémentine Symonds,
Joël Bellessa,
Jérôme Tignon,
Sukhdeep Dhillon,
Jean-Blaise Brubach,
Pascale Roy,
Juliette Mangeney
Abstract:
Electromagnetic resonators, which are based on optical cavities or electronic circuits, are key elements to enhance and control light-matter interaction. In the THz range, current optical cavities exhibit very high-quality factors with $(λ/2)^3$ mode volumes limited by diffraction, whereas resonant electronic circuits show low quality factor but provide strong subwavelength effective volume (…
▽ More
Electromagnetic resonators, which are based on optical cavities or electronic circuits, are key elements to enhance and control light-matter interaction. In the THz range, current optical cavities exhibit very high-quality factors with $(λ/2)^3$ mode volumes limited by diffraction, whereas resonant electronic circuits show low quality factor but provide strong subwavelength effective volume ($10^{-6} λ^3$). To overcome the limitations of each type of resonator, great efforts are being devoted to improving the performances of current methods or to the emergence of original approaches. Here, we report on an optical resonator based on Tamm modes newly applied to the THz range, comprising a metallic layer on a distributed Bragg reflector and demonstrating a high-quality factor of 230 at $\sim$1 THz. We further experimentally and theoretically show a fine-tuning of the Tamm mode frequency (over a 250 GHz range) and polarization sensitivity by subwavelength structuration of the metallic layer. Electromagnetic simulations also reveal that THz Tamm modes are confined over a $λ$/2 length within the distributed Bragg reflector and can be ideally coupled to both bulk materials and 2D materials. These THz Tamm cavities are therefore attractive as basic building blocks of lasers, for the development of advanced THz optoelectronic devices such as sensitive detectors, high-contrast modulators, narrow filters, and polarizers, as well as for THz cavity quantum electrodynamics in nanostructures.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
Four-Dimensional Imaging of Lattice Dynamics using Inelastic Scattering
Authors:
Navdeep Rana,
Aditya Prasad Roy,
Dipanshu Bansal,
Gopal Dixit
Abstract:
Time-resolved map** of lattice dynamics in real- and momentum-space is essential to understand better several ubiquitous phenomena such as heat transport, displacive phase transition, thermal conductivity, and many more. In this regard, time-resolved diffraction and microscopy methods are employed to image the induced lattice dynamics within a pump-probe configuration. In this work, we demonstra…
▽ More
Time-resolved map** of lattice dynamics in real- and momentum-space is essential to understand better several ubiquitous phenomena such as heat transport, displacive phase transition, thermal conductivity, and many more. In this regard, time-resolved diffraction and microscopy methods are employed to image the induced lattice dynamics within a pump-probe configuration. In this work, we demonstrate that inelastic scattering methods, with the aid of theoretical simulation, are competent to provide similar information as one could obtain from the time-resolved diffraction and imaging measurements. To illustrate the robustness of the proposed method, our simulated result of lattice dynamics in germanium is in excellent agreement with the time-resolved x-ray diffuse scattering measurement performed using x-ray free-electron laser. For a given inelastic scattering data in energy and momentum space, the proposed method is useful to image in-situ lattice dynamics under different environmental conditions of temperature, pressure, and magnetic field. Moreover, the technique will profoundly impact where time-resolved diffraction within the pump-probe setup is not feasible, for instance, in inelastic neutron scattering.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.