-
The Potsdam astroComb (POCO) Part I: Mode crossing effect in feedback resonators
Authors:
Daniel Bodenmüller,
Kalaga Madhav,
Martin Roth
Abstract:
We investigate theoretically and experimentally the mode interaction in an integrated Silicon Nitride (Si3N4) microring resonator with interferometric coupling realized by a feedback loop as an adjustable optical path path length connecting the ring to the bus waveguide at two coupling sections. From the transmission spectra recorded at different optical path lengths, two resonances, 1596.5~nm and…
▽ More
We investigate theoretically and experimentally the mode interaction in an integrated Silicon Nitride (Si3N4) microring resonator with interferometric coupling realized by a feedback loop as an adjustable optical path path length connecting the ring to the bus waveguide at two coupling sections. From the transmission spectra recorded at different optical path lengths, two resonances, 1596.5~nm and 1570.5~nm, were selected for detailed investigation. Both resonances show the possibility of adjusting the resonance width and depth. However, the transmission spectra around the first resonance also show the effect of mode interaction. This is also well captured in the theoretical model, from which we can derive a coupling rate for the mode interaction of $3.4~\textrm{rad}~\textrm{ns}^{-1}$.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Ground observations of a space laser for the assessment of its in-orbit performance
Authors:
The Pierre Auger Collaboration,
O. Lux,
I. Krisch,
O. Reitebuch,
D. Huber,
D. Wernham,
T. Parrinello,
:,
A. Abdul Halim,
P. Abreu,
M. Aglietta,
I. Allekotte,
K. Almeida Cheminant,
A. Almela,
R. Aloisio,
J. Alvarez-Muñiz,
J. Ammerman Yebra,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
Anukriti,
L. Apollonio,
C. Aramo,
P. R. Araújo Ferreira
, et al. (358 additional authors not shown)
Abstract:
The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the…
▽ More
The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the course of the mission due to a progressive loss of the atmospheric backscatter signal. The analysis of the root cause was supported by the Pierre Auger Observatory in Argentina whose fluorescence detector registered the ultraviolet laser pulses emitted from the instrument in space, thereby offering an estimation of the laser energy at the exit of the instrument for several days in 2019, 2020 and 2021. The reconstruction of the laser beam not only allowed for an independent assessment of the Aeolus performance, but also helped to improve the accuracy in the determination of the laser beam's ground track on single pulse level. The results presented in this paper set a precedent for the monitoring of space lasers by ground-based telescopes and open new possibilities for the calibration of cosmic-ray observatories.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Characterization of a C-RED One camera for astrophotonical applications
Authors:
Stella Vješnica,
Eloy Hernandez,
Kalaga Madhav,
Martin M. Roth
Abstract:
To better understand the impact of the avalanche gain applied in the detector technology and apply this technology in our in-house astrophotonic projects, we have characterized a C-RED One camera and produced a stable and reliable method for calculating the system gain at any desired avalanche gain setting. We observed that depending on how the system gain is obtained, multiplying the system gain…
▽ More
To better understand the impact of the avalanche gain applied in the detector technology and apply this technology in our in-house astrophotonic projects, we have characterized a C-RED One camera and produced a stable and reliable method for calculating the system gain at any desired avalanche gain setting. We observed that depending on how the system gain is obtained, multiplying the system gain times the avalanche gain may not accurately produce a conversion factor from electrons to ADUs. Since the acquisition of a photon transfer curve (PTC) was possible at different avalanche gain levels, several PTCs at low avalanche gain levels were acquired. Consequently, a linear fit was produced from the acquired system gain as a function of the avalanche gain setting. Through the linear fit, the effective system gain was calculated at any desired avalanche level. The effective system gain makes possible to accurately calculate the initial system gain without the ambiguity introduced by the non-linearity of the system. Besides, the impact of the avalanche gain on the dynamic range was also analyzed and showed a stable behaviour through the measured avalanche range.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Practical demonstration of a six-telescope integrated optics beam combiner for the astronomical J- and H-band manufactured with ultrafast laser inscription
Authors:
Aline N. Dinkelaker,
Sebastian Smarzyk,
Abani S. Nayak,
Simone Piacentini,
Giacomo Corrielli,
Roberto Osellame,
Ettore Pedretti,
Martin M. Roth,
Kalaga Madhav
Abstract:
We have built and characterized a six-telescope near-infrared discrete beam combiner (DBC) for stellar interferometry using the technique of ultrafast laser inscription (ULI). The 3D beam combiner consists of evanescently coupled waveguides fabricated in borosilicate glass, with a throughput of around 56%. Devices of two design types are characterized over the astronomical J and H band. Using the…
▽ More
We have built and characterized a six-telescope near-infrared discrete beam combiner (DBC) for stellar interferometry using the technique of ultrafast laser inscription (ULI). The 3D beam combiner consists of evanescently coupled waveguides fabricated in borosilicate glass, with a throughput of around 56%. Devices of two design types are characterized over the astronomical J and H band. Using the 15 non-redundant combinations of pairs, we populate the elements of the visibility-to-pixel matrix (V2PM) of the beam combiner using a two-input Michelson interferometer setup. We identify the complex visibility as wavelength dependent, with different optimum wavelengths for the two types of devices. For the design that includes a fan-in region, a baseline-averaged mean visibility amplitude of 1.05 and relative precision of 2.9% and 3.8% are extracted for characterization at 1328 nm and 1380 nm, respectively. Operation is also possible in the H-band, with a relative precision of 4.8% at 1520 nm. Broadband characterization is subject to dispersion effects, but gives similar performance results to their monochromatic counterparts in the J-band at 1350 nm.
△ Less
Submitted 18 June, 2023;
originally announced June 2023.
-
A brief History of Image Sensors in the Optical
Authors:
Martin M. Roth
Abstract:
Image sensors, most notably the Charge Coupled Device (CCD), have revolutionized observational astronomy as perhaps the most important innovation after photography. Since the 50th anniversary of the invention of the CCD has passed in 2019, it is time to review the development of detectors for the visible wavelength range, starting with the discovery of the photoelectric effect and first experiment…
▽ More
Image sensors, most notably the Charge Coupled Device (CCD), have revolutionized observational astronomy as perhaps the most important innovation after photography. Since the 50th anniversary of the invention of the CCD has passed in 2019, it is time to review the development of detectors for the visible wavelength range, starting with the discovery of the photoelectric effect and first experiments to utilize it for the photometry of stars at Sternwarte Babelsberg in 1913, over the invention of the CCD, its development at the Jet Propulsion Laboratory, to the high performance CCD and CMOS imagers that are available off-the-shelf today.
△ Less
Submitted 14 April, 2023;
originally announced April 2023.
-
Astrophotonics: photonic integrated circuits for astronomical instrumentation
Authors:
Martin M. Roth,
Kalaga Madhav,
Andreas Stoll,
Daniel Bodenmueller,
Aline Dinkelaker,
Aashia Rahman,
Eloy Hernandez,
Alan Guenther,
Stella Vjesnica
Abstract:
Photonic Integrated Circuits (PIC) are best known for their important role in the telecommunication sector, e.g. high speed communication devices in data centers. However, PIC also hold the promise for innovation in sectors like life science, medicine, sensing, automotive etc. The past two decades have seen efforts of utilizing PIC to enhance the performance of instrumentation for astronomical tel…
▽ More
Photonic Integrated Circuits (PIC) are best known for their important role in the telecommunication sector, e.g. high speed communication devices in data centers. However, PIC also hold the promise for innovation in sectors like life science, medicine, sensing, automotive etc. The past two decades have seen efforts of utilizing PIC to enhance the performance of instrumentation for astronomical telescopes, perhaps the most spectacular example being the integrated optics beam combiner for the interferometer GRAVITY at the ESO Very Large Telescope. This instrument has enabled observations of the supermassive black hole in the center of the Milky Way at unprecedented angular resolution, eventually leading to the Nobel Price for Physics in 2020. Several groups worldwide are actively engaged in the emerging field of astrophotonics research, amongst them the innoFSPEC Center in Potsdam, Germany. We present results for a number of applications developed at innoFSPEC, notably PIC for integrated photonic spectrographs on the basis of arrayed waveguide gratings and the PAWS demonstrator (Potsdam Arrayed Waveguide Spectrograph), PIC-based ring resonators in astronomical frequency combs for precision wavelength calibration, discrete beam combiners (DBC) for large astronomical interferometers, as well as aperiodic fiber Bragg gratings for complex astronomical filters and their possible derivatives in PIC.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Ground-based Synoptic Studies of the Sun
Authors:
Sanjay Gosain,
V. Martinez Pillet,
A. Pevtsov,
H. Gilbert,
S. Gibson,
A. G. de Wijn,
J. Burkepile,
A. Asai,
H. M. Bain,
C. J. Henney,
Y. Katsukawa,
H. Lin,
W. Manchester,
J. McAteer,
K. Muglach,
M. Rast,
M. Roth,
J. Zhang
Abstract:
Ground-based synoptic solar observations provide critical contextual data used to model the large-scale state of the heliosphere. The next decade will see a combination of ground-based telescopes and space missions that will study our Sun's atmosphere microscopic processes with unprecedented detail. This white paper describes contextual observations from a ground-based network needed to fully expl…
▽ More
Ground-based synoptic solar observations provide critical contextual data used to model the large-scale state of the heliosphere. The next decade will see a combination of ground-based telescopes and space missions that will study our Sun's atmosphere microscopic processes with unprecedented detail. This white paper describes contextual observations from a ground-based network needed to fully exploit this new knowledge of the underlying physics that leads to the magnetic linkages between the heliosphere and the Sun. This combination of a better understanding of small-scale processes and the appropriate global context will enable a physics-based approach to Space Weather comparable to Terrestrial Weather forecasting.
△ Less
Submitted 18 February, 2023; v1 submitted 6 December, 2022;
originally announced December 2022.
-
Solar-MACH: An open-source tool to analyze solar magnetic connection configurations
Authors:
Jan Gieseler,
Nina Dresing,
Christian Palmroos,
Johan L. Freiherr von Forstner,
Daniel J. Price,
Rami Vainio,
Athanasios Kouloumvakos,
Laura Rodríguez-García,
Domenico Trotta,
Vincent Génot,
Arnaud Masson,
Markus Roth,
Astrid Veronig
Abstract:
The Solar MAgnetic Connection HAUS tool (Solar-MACH) is an open-source tool completely written in Python that derives and visualizes the spatial configuration and solar magnetic connection of different observers (i.e., spacecraft or planets) in the heliosphere at different times. For doing this, the magnetic connection in the interplanetary space is obtained by the classic Parker Heliospheric Magn…
▽ More
The Solar MAgnetic Connection HAUS tool (Solar-MACH) is an open-source tool completely written in Python that derives and visualizes the spatial configuration and solar magnetic connection of different observers (i.e., spacecraft or planets) in the heliosphere at different times. For doing this, the magnetic connection in the interplanetary space is obtained by the classic Parker Heliospheric Magnetic Field (HMF). In close vicinity of the Sun, a Potential Field Source Surface (PFSS) model can be applied to connect the HMF to the solar photosphere. Solar-MACH is especially aimed at providing publication-ready figures for the analyses of Solar Energetic Particle events (SEPs) or solar transients such as Coronal Mass Ejections (CMEs). It is provided as an installable Python package (listed on PyPI and conda-forge), but also as a web tool at solar-mach.github.io that completely runs in any web browser and requires neither Python knowledge nor installation. The development of Solar-MACH is open to everyone and takes place on GitHub, where the source code is publicly available under the BSD 3-Clause License. Established Python libraries like sunpy and pfsspy are utilized to obtain functionalities when possible. In this article, the Python code of Solar-MACH is explained, and its functionality is demonstrated using real science examples. In addition, we introduce the overarching SERPENTINE project, the umbrella under which the recent development took place.
△ Less
Submitted 12 January, 2023; v1 submitted 3 October, 2022;
originally announced October 2022.
-
Guided Electromagnetic Discharge Pulses Driven by Short Intense Laser Pulses: Characterisation and Modelling
Authors:
M. Ehret,
M. Bailly-Grandvaux,
Ph. Korneev,
J. I. Apiñaniz,
C. Brabetz,
A. Morace,
P. Bradford,
E. d'Humières,
G. Schaumann,
V. Bagnoud,
S. Malko,
C. Matveevskii,
M. Roth,
L. Volpe,
N. C. Woolsey,
J. J. Santos
Abstract:
Strong electromagnetic pulses (EMP) are generated from intense laser interactions with solid-density targets, and can be guided by the target geometry, specifically through conductive connections to the ground. We present an experimental characterization, by time- and spatial-resolved proton deflectometry, of guided electromagnetic discharge pulses along wires including a coil, driven by 0.5 ps, 5…
▽ More
Strong electromagnetic pulses (EMP) are generated from intense laser interactions with solid-density targets, and can be guided by the target geometry, specifically through conductive connections to the ground. We present an experimental characterization, by time- and spatial-resolved proton deflectometry, of guided electromagnetic discharge pulses along wires including a coil, driven by 0.5 ps, 50 J, 1e19 W/cm2 laser pulses. Proton-deflectometry data allows to time-resolve first the EMP due to the laser-driven target charging and then the return EMP from the ground through the conductive target stalk. Both EMPs have a typical duration of tens of ps and correspond to currents in the kA-range with electric-field amplitudes of multiple GV/m. The sub-mm coil in the target rod creates lensing effects on probing protons, due to both magnetic- and electric-field contributions. This way, protons of 10 MeV-energy range are focused over cm-scale distances. Experimental results are supported by analytical modelling and high-resolution numerical particle-in-cell simulations, unraveling the likely presence of a surface plasma, which parameters define the discharge pulse dispersion in the non-linear propagation regime.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Online Charge Measurement for Petawatt Laser-Driven Ion Acceleration
Authors:
Laura D. Geulig,
Lieselotte Obst-Huebl,
Kei Nakamura,
Jianhui Bin,
Qing Ji,
Sven Steinke,
Antoine Snijders,
Jian-Hua Mao,
Eleanor Blakely,
Anthony J. Gonsalves,
Stepan S. Bulanov,
Jeroen van Tilborg,
Carl B. Schroeder,
Cameron G. R. Geddes,
Eric Esarey,
Markus Roth,
Thomas Schenkel
Abstract:
Laser-driven ion beams have gained considerable attention for their potential use in multidisciplinary research and technology. Pre-clinical studies into their radiobiological effectiveness have established the prospect of using laser-driven ion beams for radiotherapy. In particular, research into the beneficial effects of ultra-high instantaneous dose rates is enabled by the high ion bunch charge…
▽ More
Laser-driven ion beams have gained considerable attention for their potential use in multidisciplinary research and technology. Pre-clinical studies into their radiobiological effectiveness have established the prospect of using laser-driven ion beams for radiotherapy. In particular, research into the beneficial effects of ultra-high instantaneous dose rates is enabled by the high ion bunch charge and uniquely short bunch lengths present for laser-driven ion beams. Such studies require reliable, online dosimetry methods to monitor the bunch charge for every laser shot to ensure that the prescribed dose is accurately applied to the biological sample. In this paper we present the first successful use of an Integrating Current Transformer (ICT) for laser-driven ion accelerators. This is a non-invasive diagnostic to measure the charge of the accelerated ion bunch. It enables online dose measurements in radiobiological experiments and facilitates ion beam tuning, in particular, optimization of the laser ion source and alignment of the proton transport beamline. We present the ICT implementation and the correlation with other diagnostics such as radiochromic films, a Thomson parabola spectrometer and a scintillator.
△ Less
Submitted 3 May, 2022;
originally announced May 2022.
-
Laser Driven Nuclear physics at ELINP
Authors:
F. Negoita,
M. Roth,
P. G. Thirolf,
S. Tudisco,
F. Hannachi,
S. Moustaizis,
I. Pomerantz,
P. Mckenna,
J. Fuchs,
K. Sphor,
G. Acbas,
A. Anzalone,
P. Audebert,
S. Balascuta,
F. Cappuzzello,
M. O. Cernaianu,
S. Chen,
I. Dancus,
R. Freeman,
H. Geissel,
P. Ghenuche,
L. Gizzi,
F. Gobet,
G. Gosselin,
M. Gugiu
, et al. (31 additional authors not shown)
Abstract:
High power lasers have proven being capable to produce high energy gamma rays, charged particles and neutrons to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities.
High power lasers have proven being capable to produce high energy gamma rays, charged particles and neutrons to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities.
△ Less
Submitted 4 January, 2022;
originally announced January 2022.
-
Design, simulation and characterization of integrated photonic spectrographs for Astronomy I: Generation-I AWG devices based on canonical layouts
Authors:
Andreas Stoll,
Kalaga V. Madhav,
Martin M. Roth
Abstract:
We present an experimental study on our first generation of custom-developed arrayed waveguide gratings (AWG) on silica platform for spectroscopic applications in near-infrared astronomy. We provide a comprehensive description of the design, numerical simulation and characterization of several AWG devices aimed at spectral resolving powers of 15,000 - 60,000 in the astronomical H-band. We evaluate…
▽ More
We present an experimental study on our first generation of custom-developed arrayed waveguide gratings (AWG) on silica platform for spectroscopic applications in near-infrared astronomy. We provide a comprehensive description of the design, numerical simulation and characterization of several AWG devices aimed at spectral resolving powers of 15,000 - 60,000 in the astronomical H-band. We evaluate the spectral characteristics of the fabricated devices in terms of insertion loss and estimated spectral resolving power and compare the results with numerical simulations. We estimate resolving powers of up to 18,900 from the output channel 3-dB transmission bandwidth. Based on the first characterization results, we select two candidate AWGs for further processing by removal of the output waveguide array and polishing the output facet to optical quality with the goal of integration as the primary diffractive element in a cross-dispersed spectrograph. We further study the imaging properties of the processed AWGs with regards to spectral resolution in direct imaging mode, geometry-related defocus aberration, and polarization sensitivity of the spectral image. We identify phase error control, birefringence control, and aberration suppression as the three key areas of future research and development in the field of high-resolution AWG-based spectroscopy in astronomy.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Seeking celestial Positronium with an OH-suppressed diffraction-limited spectrograph
Authors:
J. Gordon Robertson,
Simon Ellis,
Qingshan Yu,
Joss Bland-Hawthorn,
Christopher Betters,
Martin Roth,
Sergio Leon-Saval
Abstract:
Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray obse…
▽ More
Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray observations is possible. However, the background in the NIR is dominated by extremely bright atmospheric hydroxyl (OH) emission lines. In this paper we present the design of a diffraction-limited spectroscopic system using novel photonic components - a photonic lantern, OH Fiber Bragg Grating filters, and a photonic TIGER 2-dimensional pseudo-slit - to observe the Ps Balmer alpha line at 1.3122 microns for the first time.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Development and validation of the signal simulation for the underground muon detector of the Pierre Auger Observatory
Authors:
A. M. Botti,
F. Sánchez,
M. Roth,
A. Etchegoyen
Abstract:
The underground muon detector of the Pierre Auger Observatory is aimed at attaining direct measurements of the muonic component of extensive air showers produced by cosmic rays with energy from $10^{16.5}$ eV up to the region of the ankle (around $10^{18.7}$ eV). It consists of two nested triangular grids of underground scintillators with 433 m, and 750 m spacings and a total of 71 positions, each…
▽ More
The underground muon detector of the Pierre Auger Observatory is aimed at attaining direct measurements of the muonic component of extensive air showers produced by cosmic rays with energy from $10^{16.5}$ eV up to the region of the ankle (around $10^{18.7}$ eV). It consists of two nested triangular grids of underground scintillators with 433 m, and 750 m spacings and a total of 71 positions, each with 192 scintillator strips (30 m$^2$) deployed 2.3 m underground. The light produced by im**ing muons in the scintillators is propagated with optical fibers towards an array of silicon photomultipliers. In this work, we present the development, validation, and performance of an end-to-end tool for simulating the response of the underground muon detector to single-muon signals, which constitutes the basis for further simulations of the whole array. Laboratory data and simulation outcomes are found consistent, showing that with the underground muon detector we can measure single muons, with an efficiency of 99 %, up to about 1050 particles arriving at exactly the same time in 30 m$^2$ of scintillator.
△ Less
Submitted 11 August, 2021; v1 submitted 27 April, 2021;
originally announced April 2021.
-
Optimal SMF packing in photonic lanterns: comparing theoretical topology to practical packing arrangements
Authors:
John J. Davenport,
Momen Diab,
Kalaga Madhav,
Martin M. Roth
Abstract:
Photonic lanterns rely on a close packed arrangement of single mode fibers, which are tapered and fused into one multi-mode core. Topologically optimal circle packing arrangements have been well studied. Using this, we fabricate PLs with 19 and 37 SMFs showing tightly packed, ordered arrangements with packing densities of 95 % and 99 % of theoretically achievable values, with mean adjacent core se…
▽ More
Photonic lanterns rely on a close packed arrangement of single mode fibers, which are tapered and fused into one multi-mode core. Topologically optimal circle packing arrangements have been well studied. Using this, we fabricate PLs with 19 and 37 SMFs showing tightly packed, ordered arrangements with packing densities of 95 % and 99 % of theoretically achievable values, with mean adjacent core separations of 1.03 and 1.08 fiber diameters, respectively. We demonstrate that topological circle packing data is a good predictor for optimal PL parameters.
△ Less
Submitted 19 April, 2021;
originally announced April 2021.
-
Simulations of mode-selective photonic lanterns for efficient coupling of starlight into the single-mode regime
Authors:
Momen Diab,
Aashana Tripathi,
John Davenport,
Aline N. Dinkelaker,
Kalaga Madhav,
Martin M. Roth
Abstract:
In ground-based astronomy, starlight distorted by the atmosphere couples poorly into single-mode waveguides but a correction by adaptive optics, even if only partial, can boost coupling into the few-mode regime allowing the use of photonic lanterns to convert into multiple single-mode beams. Corrected wavefronts result in focal patterns that couple mostly with the circularly symmetric waveguide mo…
▽ More
In ground-based astronomy, starlight distorted by the atmosphere couples poorly into single-mode waveguides but a correction by adaptive optics, even if only partial, can boost coupling into the few-mode regime allowing the use of photonic lanterns to convert into multiple single-mode beams. Corrected wavefronts result in focal patterns that couple mostly with the circularly symmetric waveguide modes. A mode-selective photonic lantern is hence proposed to convert the multimode light into a subset of the single-mode waveguides of the standard photonic lantern, thereby reducing the required number of outputs. We ran simulations to show that only two out of the six waveguides of a 1x6 photonic lantern carry >95% of the coupled light to the outputs at $D/r_0 < 10$ if the wavefront is partially corrected and the photonic lantern is made mode-selective.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Ion acceleration by an ultrashort laser pulse interacting with a near-critical-density gas jet
Authors:
M. Ehret,
C. Salgado-Lopez,
V. Ospina-Bohorquez,
J. A. Perez-Hernandez,
M. Huault,
M. de Marco,
J. I. Apinaniz,
F. Hannachi,
D. De Luis,
J. Hernandez Toro,
D. Arana,
C. Mendez,
O. Varela,
A. Debayle,
L. Gremillet,
T. -H. Nguyen-Bui,
E. Olivier,
G. Revet,
N. D. Bukharskii,
H. Larreur,
J. Caron,
C. Vlachos,
T. Ceccotti,
D. Raffestin,
P. Nicolai
, et al. (6 additional authors not shown)
Abstract:
We demonstrate laser-driven Helium ion acceleration with cut-off energies above 25 MeV and peaked ion number above $10^8$ /MeV for 22(2) MeV projectiles from near-critical density gas jet targets. We employed shock gas jet nozzles at the high-repetition-rate (HRR) VEGA-2 laser system with 3 J in pulses of 30 fs focused down to intensities in the range between $9\times10^{19}$ W/cm$^2$ and…
▽ More
We demonstrate laser-driven Helium ion acceleration with cut-off energies above 25 MeV and peaked ion number above $10^8$ /MeV for 22(2) MeV projectiles from near-critical density gas jet targets. We employed shock gas jet nozzles at the high-repetition-rate (HRR) VEGA-2 laser system with 3 J in pulses of 30 fs focused down to intensities in the range between $9\times10^{19}$ W/cm$^2$ and $1.2\times10^{20}$ W/cm$^2$. We demonstrate acceleration spectra with minor shot-to-shot changes for small variations in the target gas density profile. Difference in gas profiles arise due to nozzles being exposed to a experimental environment, partially ablating and melting.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Wide Field Spectral Imaging with Shifted Excitation Raman Difference Spectroscopy Using the Nod and Shuffle Technique
Authors:
Florian Korinth,
Elmar Schmälzlin,
Clara Stiebing,
Tanya Urrutia,
Genoveva Micheva,
Christer Sandin,
André Müller,
Martin Maiwald,
Bernd Sumpf,
Christoph Krafft,
Günther Tränkle,
Martin M. Roth,
Jürgen Popp
Abstract:
Wide field Raman imaging using the integral field spectroscopy approach was used as a fast, one shot imaging method for the simultaneous collection of all spectra composing a Raman image. For the suppression of autofluorescence and background signals such as room light, shifted excitation Raman difference spectroscopy (SERDS) was applied to remove background artifacts in Raman spectra. To reduce a…
▽ More
Wide field Raman imaging using the integral field spectroscopy approach was used as a fast, one shot imaging method for the simultaneous collection of all spectra composing a Raman image. For the suppression of autofluorescence and background signals such as room light, shifted excitation Raman difference spectroscopy (SERDS) was applied to remove background artifacts in Raman spectra. To reduce acquisition times in wide field SERDS imaging, we adapted the nod and shuffle technique from astrophysics and implemented it into a wide field SERDS imaging setup. In our adapted version, the nod corresponds to the change in excitation wavelength, whereas the shuffle corresponds to the shifting of charges up and down on a Charge-Coupled Device (CCD) chip synchronous to the change in excitation wavelength. We coupled this improved wide field SERDS imaging setup to diode lasers with 784.4/785.5 and 457.7/458.9 nm excitation and applied it to samples such as paracetamol and aspirin tablets, polystyrene and polymethyl methacrylate beads, as well as pork meat using multiple accumulations with acquisition times in the range of 50 to 200 ms. The results tackle two main challenges of SERDS imaging: gradual photobleaching changes the autofluorescence background, and multiple readouts of CCD detector prolong the acquisition time.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Starlight coupling through atmospheric turbulence into few-mode fibers and photonic lanterns in the presence of partial adaptive optics correction
Authors:
Momen Diab,
Aline N. Dinkelaker,
John Davenport,
Kalaga Madhav,
Martin M. Roth
Abstract:
Starlight corrupted by atmospheric turbulence cannot couple efficiently into astronomical instruments based on integrated optics as they require light of high spatial coherence to couple into their single-mode waveguides. Low-order adaptive optics in combination with photonic lanterns offer a practical approach to achieve efficient coupling into multiplexed astrophotonic devices. We investigate, a…
▽ More
Starlight corrupted by atmospheric turbulence cannot couple efficiently into astronomical instruments based on integrated optics as they require light of high spatial coherence to couple into their single-mode waveguides. Low-order adaptive optics in combination with photonic lanterns offer a practical approach to achieve efficient coupling into multiplexed astrophotonic devices. We investigate, aided by simulations and an experimental testbed, the trade-off between the degrees of freedom of the adaptive optics system and those of the input waveguide of an integrated optic component leading to a cost-effective hybrid system that achieves a signal-to-noise ratio higher than a standalone device fed by a single-mode fiber.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
-
Design, upgrade and characterization of the silicon photomultiplier front-end for the AMIGA detector at the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
J. M. Albury,
I. Allekotte,
A. Almela,
J. Alvarez-Muñiz,
R. Alves Batista,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
P. R. Araújo Ferreira,
H. Asorey,
P. Assis,
G. Avila,
A. M. Badescu,
A. Bakalova,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz,
K. H. Becker,
J. A. Bellido
, et al. (335 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each det…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each detector is composed of three scintillation modules, with 10 m$^2$ detection area per module, buried at 2.3 m depth, resulting in a total detection area of 30 m$^2$. Silicon photomultiplier sensors (SiPM) measure the amount of scintillation light generated by charged particles traversing the modules. In this paper, the design of the front-end electronics to process the signals of those SiPMs and test results from the laboratory and from the Pierre Auger Observatory are described. Compared to our previous prototype, the new electronics shows a higher performance, higher efficiency and lower power consumption, and it has a new acquisition system with increased dynamic range that allows measurements closer to the shower core. The new acquisition system is based on the measurement of the total charge signal that the muonic component of the cosmic ray shower generates in the detector.
△ Less
Submitted 25 January, 2021; v1 submitted 12 November, 2020;
originally announced November 2020.
-
Studies on the response of a water-Cherenkov detector of the Pierre Auger Observatory to atmospheric muons using an RPC hodoscope
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
J. M. Albury,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
P. R. Araújo Ferreira,
H. Asorey,
P. Assis,
G. Avila,
A. M. Badescu,
A. Bakalova,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz,
K. H. Becker
, et al. (353 additional authors not shown)
Abstract:
Extensive air showers, originating from ultra-high energy cosmic rays, have been successfully measured through the use of arrays of water-Cherenkov detectors (WCDs). Sophisticated analyses exploiting WCD data have made it possible to demonstrate that shower simulations, based on different hadronic-interaction models, cannot reproduce the observed number of muons at the ground. The accurate knowled…
▽ More
Extensive air showers, originating from ultra-high energy cosmic rays, have been successfully measured through the use of arrays of water-Cherenkov detectors (WCDs). Sophisticated analyses exploiting WCD data have made it possible to demonstrate that shower simulations, based on different hadronic-interaction models, cannot reproduce the observed number of muons at the ground. The accurate knowledge of the WCD response to muons is paramount in establishing the exact level of this discrepancy. In this work, we report on a study of the response of a WCD of the Pierre Auger Observatory to atmospheric muons performed with a hodoscope made of resistive plate chambers (RPCs), enabling us to select and reconstruct nearly 600 thousand single muon trajectories with zenith angles ranging from 0$^\circ$ to 55$^\circ$. Comparison of distributions of key observables between the hodoscope data and the predictions of dedicated simulations allows us to demonstrate the accuracy of the latter at a level of 2%. As the WCD calibration is based on its response to atmospheric muons, the hodoscope data are also exploited to show the long-term stability of the procedure.
△ Less
Submitted 9 September, 2020; v1 submitted 8 July, 2020;
originally announced July 2020.
-
Limits from the Funk Experiment on the Mixing Strength of Hidden-Photon Dark Matter in the Visible and Near-Ultraviolet Wavelength Range
Authors:
A. Andrianavalomahefa,
C. M. Schäfer,
D. Veberič,
R. Engel,
T. Schwetz,
H. -J. Mathes,
K. Daumiller,
M. Roth,
D. Schmidt,
R. Ulrich,
B. Döbrich,
J. Jaeckel,
M. Kowalski,
A. Lindner,
J. Redondo
Abstract:
We present results from the FUNK experiment in the search for hidden-photon dark matter. Near the surface of a mirror, hidden photons may be converted into ordinary photons. These photons are emitted perpendicular to the surface and have an energy equal to the mass of the dark matter hidden photon. Our experimental setup consists of a large, spherical mirror with an area of more than 14 m$^2$, whi…
▽ More
We present results from the FUNK experiment in the search for hidden-photon dark matter. Near the surface of a mirror, hidden photons may be converted into ordinary photons. These photons are emitted perpendicular to the surface and have an energy equal to the mass of the dark matter hidden photon. Our experimental setup consists of a large, spherical mirror with an area of more than 14 m$^2$, which concentrates the emitted photons into its central point. Using a detector sensitive to visible and near-UV photons, we can exclude a kinetic-mixing coupling of stronger than $χ\approx 10^{-12}$ in the mass range of 2.5 to 7 eV, assuming hidden photons comprise all of the dark matter. The experimental setup and analysis used to obtain this limit are discussed in detail.
△ Less
Submitted 23 June, 2020; v1 submitted 29 March, 2020;
originally announced March 2020.
-
Versatile high-speed confocal microscopy using a single laser beam
Authors:
Benedikt B. Straub,
David C. Lah,
Henrik Schmidt,
Marcel Roth,
Laurent Gilson,
Hans-Jürgen Butt,
Günter K. Auernhammer
Abstract:
We present a new flexible high speed laser scanning confocal microscope and its extension by an astigmatism particle tracking device (APTV). Many standard confocal microscopes use either a single laser beam to scan the sample at relatively low overall frame rate, or many laser beam to simultaneously scan the sample and achieve a high overall frame rate. Single-laser-beam confocal microscope often…
▽ More
We present a new flexible high speed laser scanning confocal microscope and its extension by an astigmatism particle tracking device (APTV). Many standard confocal microscopes use either a single laser beam to scan the sample at relatively low overall frame rate, or many laser beam to simultaneously scan the sample and achieve a high overall frame rate. Single-laser-beam confocal microscope often use a point detector to acquire the image. To achieve high overall frame rates, we use, next to the standard 2D probe scanning unit, a second 2D scan unit projecting the image directly on a 2D CCD-sensor (re-scan configuration). Using only a single laser beam eliminates cross-talk and leads to an imaging quality that is independent of the frame rate with a lateral resolution of 0.235\unit{μm}. The design described here is suitable for high frame rate, i.e., for frame rates well above video rate (full frame) up to a line rate of 32kHz. The dwell time of the laser focus on any spot in the sample (122ns) is significantly shorter than in standard confocal microscopes (in the order of milli or microseconds). This short dwell time reduces phototoxicity and bleaching of fluorescent molecules. The new design opens further flexibility and facilitates coupling to other optical methods. The setup can easily be extended by an APTV device to measure three dimensional dynamics while being able to show high resolution confocal structures. Thus one can use the high resolution confocal information synchronized with an APTV dataset.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Kilotesla plasmoid formation by a trapped relativistic laser beam
Authors:
M. Ehret,
Yu. Kochetkov,
Y. Abe,
K. F. F. Law,
V. Stepanischev,
S. Fujioka,
E. d'Humi'eres,
B. Zielbauer,
V. Bagnoud,
G. Schaumann,
M. Roth,
V. Tikhonchuk,
J. J. Santos,
Ph. Korneev
Abstract:
A strong quasi-stationary magnetic field is generated in hollow targets with curved internal surface under the action of a relativistically intense picosecond laser pulse. Experimental data evidence formation of quasistationary strongly magnetized plasma structures decaying on the hundred picoseconds time scale, with the maximum value of magnetic field strength of the kilotesla scale. Numerical si…
▽ More
A strong quasi-stationary magnetic field is generated in hollow targets with curved internal surface under the action of a relativistically intense picosecond laser pulse. Experimental data evidence formation of quasistationary strongly magnetized plasma structures decaying on the hundred picoseconds time scale, with the maximum value of magnetic field strength of the kilotesla scale. Numerical simulations unravel the importance of transient processes during the magnetic field generation, and suggest the existence of fast and slow regimes of plasmoid evolution depending on the interaction parameters. The principal setup is universal for perspective highly magnetized plasma application and fundamental studies.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Astro2020: Astrophotonics White Paper
Authors:
Pradip Gatkine,
Sylvain Veilleux,
John Mather,
Christopher Betters,
Jonathan Bland-Hawthorn,
Julia Bryant,
S. Bradley Cenko,
Mario Dagenais,
Drake Deming,
Simon Ellis,
Matthew Greenhouse,
Andrew Harris,
Nemanja Jovanovic,
Steve Kuhlmann,
Alexander Kutyrev,
Sergio Leon-Saval,
Kalaga Madhav,
Samuel Moseley,
Barnaby Norris,
Bernard Rauscher,
Martin Roth,
Stuart Vogel
Abstract:
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic pla…
▽ More
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic platform of guided light in fibers and waveguides has opened the doors to next-generation instrumentation for both ground- and space-based telescopes in optical and near/mid-IR bands, particularly for the upcoming extremely large telescopes (ELTs). The large telescopes are pushing the limits of adaptive optics to reach close to a near-diffraction-limited performance. The photonic devices are ideally suited for capturing this AO-corrected light and enabling new and exciting science such as characterizing exoplanet atmospheres. The purpose of this white paper is to summarize the current landscape of astrophotonic devices and their scientific impact, highlight the key issues, and outline specific technological and organizational approaches to address these issues in the coming decade and thereby enable new discoveries as we embark on the era of extremely large telescopes.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Nonscanning large-area Raman imaging for ex vivo/in vivo skin cancer discrimination
Authors:
Elmar Schmälzlin,
Benito Moralejo,
Ingo Gersonde,
Johannes Schleusener,
Maxim E. Darvin,
Gisela Thiede,
Martin M. Roth
Abstract:
Imaging Raman spectroscopy can be used to identify cancerous tissue. Traditionally, a step-by-step scanning of the sample is applied to generate a Raman image, which, however, is too slow for routine examination of patients. By transferring the technique of integral field spectroscopy (IFS) from astronomy to Raman imaging, it becomes possible to record entire Raman images quickly within a single e…
▽ More
Imaging Raman spectroscopy can be used to identify cancerous tissue. Traditionally, a step-by-step scanning of the sample is applied to generate a Raman image, which, however, is too slow for routine examination of patients. By transferring the technique of integral field spectroscopy (IFS) from astronomy to Raman imaging, it becomes possible to record entire Raman images quickly within a single exposure, without the need for a tedious scanning procedure. An IFS-based Raman imaging setup is presented, which is capable of measuring skin ex vivo or in vivo. It is demonstrated how Raman images of healthy and cancerous skin biopsies were recorded and analyzed.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
Design and Implementation of a Thomson Parabola for Fluence Dependent Energy-Loss Measurements at the Neutralized Drift Compression eXperiment
Authors:
F. Treffert,
Q. Ji,
P. A. Seidl,
A. Persaud,
B. Ludewigt,
J. J. Barnard,
A. Friedman,
D. P. Grote,
E. P. Gilson,
I. D. Kaganovich,
A. Stepanov,
M. Roth,
T. Schenkel
Abstract:
The interaction of ion beams with matter includes the investigation of the basic principles of ion stop** in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stop** in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compressi…
▽ More
The interaction of ion beams with matter includes the investigation of the basic principles of ion stop** in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stop** in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compression eXperiment (NDCX-II) for ion energy-loss measurements at different ion beam fluences. The linear induction accelerator NDCX-II delivers 2 ns short, intense ion pulses, up to several tens of nC/pulse, or 10$^{10}$-10$^{11}$ ions, with a peak kinetic energy of ~1.1 MeV and a minimal spot size of 2 mm FWHM. For this particular accelerator the energy determination with conventional beam diagnostics, for example, time of flight measurements, is imprecise due to the non-trivial longitudinal phase space of the beam. In contrast, a Thomson parabola is well suited to reliably determine the beam energy distribution. The Thomson parabola differentiates charged particles by energy and charge-to-mass ratio, through deflection of charged particles by electric and magnetic fields. During first proof-of-principle experiments, we achieved to reproduce the average initial helium beam energy as predicted by computer simulations with a deviation of only 1.4 %. Successful energy-loss measurements with 1 μm thick Silicon Nitride foils show the suitability of the accelerator for such experiments. The initial ion energy was determined during a primary measurement without a target, while a second measurement, incorporating the target, was used to determine the transmitted energy. The energy-loss was then determined as the difference between the two energies.
△ Less
Submitted 28 September, 2018; v1 submitted 9 April, 2018;
originally announced April 2018.
-
Simulation Studies on Generation, Handling and Transport of laser-accelerated Carbon Ions
Authors:
J. Ding,
D. Schumacher,
D. Jahn,
A. Blazevic,
M. Roth
Abstract:
To this day the interaction of high-intensity lasers with matter is considered to be a possible candidate for next generation particle accelerators. Within the LIGHT collaboration crucial work for the merging of a high-intensity laser driven ion source with conventional accelerator technology has been done in the past years. The simulation studies we report about are an important step in providing…
▽ More
To this day the interaction of high-intensity lasers with matter is considered to be a possible candidate for next generation particle accelerators. Within the LIGHT collaboration crucial work for the merging of a high-intensity laser driven ion source with conventional accelerator technology has been done in the past years. The simulation studies we report about are an important step in providing short and intense mid-Z heavy ion beams for future applications.
△ Less
Submitted 28 February, 2018;
originally announced February 2018.
-
First application studies at the laser-driven LIGHT beamline: Improving proton beam homogeneity and imaging of a solid target
Authors:
D. Jahn,
D. Schumacher,
C. Brabetz,
J. Ding,
S. Weih,
F. Kroll,
F. -E. Brack,
U. Schramm,
A. Blazevic,
M. Roth
Abstract:
In the last two decades, the generation of intense ion beams based on laser-driven sources has become an extensively investigated field. The LIGHT collaboration combines a laserdriven intense ion source with conventional accelerator technology based on the Expertise of laser, plasma and accelerator physicists. Our collaboration has installed a laser-driven multi-MeV ion beamline at the GSI Helmhol…
▽ More
In the last two decades, the generation of intense ion beams based on laser-driven sources has become an extensively investigated field. The LIGHT collaboration combines a laserdriven intense ion source with conventional accelerator technology based on the Expertise of laser, plasma and accelerator physicists. Our collaboration has installed a laser-driven multi-MeV ion beamline at the GSI Helmholtzzentrum fuer Schwerionenforschung delivering intense proton bunches in the subnanosecond regime. We investigate possible applications for this beamline, especially in this report we focus on the imaging capabilities. We report on our proton beam homogenization and on first imaging results of a solid target.
△ Less
Submitted 30 January, 2018;
originally announced February 2018.
-
Laser-driven strong magnetostatic fields with applications to charged beam transport and magnetized high energy-density physics
Authors:
J. J. Santos,
M. Bailly-Grandvaux,
M. Ehret,
A. V. Arefiev,
D. Batani,
F. N. Beg,
A. Calisti,
S. Ferri,
R. Florido,
P. Forestier-Colleoni,
S. Fujioka,
M. A. Gigosos,
L. Giuffrida,
L. Gremillet,
. J. Honrubia,
S. Kojima,
Ph. Korneev,
K. F. F. Law,
J. -R. Marquès,
A. Morace,
C. Mossé,
O. Peyrusse,
S. Rose,
M. Roth,
S. Sakata
, et al. (6 additional authors not shown)
Abstract:
Powerful laser-plasma processes are explored to generate discharge currents of a few $100\,$kA in coil targets, yielding magnetostatic fields (B-fields) in excess of $0.5\,$kT. The quasi-static currents are provided from hot electron ejection from the laser-irradiated surface. According to our model, describing qualitatively the evolution of the discharge current, the major control parameter is th…
▽ More
Powerful laser-plasma processes are explored to generate discharge currents of a few $100\,$kA in coil targets, yielding magnetostatic fields (B-fields) in excess of $0.5\,$kT. The quasi-static currents are provided from hot electron ejection from the laser-irradiated surface. According to our model, describing qualitatively the evolution of the discharge current, the major control parameter is the laser irradiance $I_{\mathrm{las}}λ_{\mathrm{las}}^2$. The space-time evolution of the B-fields is experimentally characterized by high-frequency bandwidth B-dot probes and by proton-deflectometry measurements. The magnetic pulses, of ns-scale, are long enough to magnetize secondary targets through resistive diffusion. We applied it in experiments of laser-generated relativistic electron transport into solid dielectric targets, yielding an unprecedented 5-fold enhancement of the energy-density flux at $60 \,\mathrm{μm}$ depth, compared to unmagnetized transport conditions. These studies pave the ground for magnetized high-energy density physics investigations, related to laser-generated secondary sources of radiation and/or high-energy particles and their transport, to high-gain fusion energy schemes and to laboratory astrophysics.
△ Less
Submitted 19 December, 2017;
originally announced December 2017.
-
Search for hidden-photon Dark Matter with FUNK
Authors:
FUNK Experiment,
:,
R. Engel,
D. Veberič,
C. Schäfer,
A. Andrianavalomahefa,
K. Daumiller,
B. Döbrich,
J. Jaeckel,
M. Kowalski,
A. Lindner,
H. -J. Mathes,
J. Redondo,
M. Roth,
T. Schwetz-Mangold,
R. Ulrich
Abstract:
It has been proposed that an additional U(1) sector of hidden photons could account for the Dark Matter observed in the Universe. When passing through an interface of materials with different dielectric properties, hidden photons can give rise to photons whose wavelengths are related to the mass of the hidden photons. In this contribution we report on measurements covering the visible and near-UV…
▽ More
It has been proposed that an additional U(1) sector of hidden photons could account for the Dark Matter observed in the Universe. When passing through an interface of materials with different dielectric properties, hidden photons can give rise to photons whose wavelengths are related to the mass of the hidden photons. In this contribution we report on measurements covering the visible and near-UV spectrum that were done with a large, 14 m2 spherical metallic mirror and discuss future dark-matter searches in the eV and sub-eV range by application of different electromagnetic radiation detectors.
△ Less
Submitted 1 November, 2017;
originally announced November 2017.
-
Search for hidden-photon dark matter with the FUNK experiment
Authors:
FUNK Experiment,
:,
D. Veberič,
A. Andrianavalomahefa,
K. Daumiller,
B. Döbrich,
R. Engel,
J. Jaeckel,
M. Kowalski,
A. Lindner,
H. -J. Mathes,
J. Redondo,
M. Roth,
T. Schwetz-Mangold,
C. M. Schäfer,
R. Ulrich
Abstract:
Many extensions of the Standard Model of particle physics predict a parallel sector of a new U(1) symmetry, giving rise to hidden photons. These hidden photons are candidate particles for cold dark matter. They are expected to kinetically mix with regular photons, which leads to a tiny oscillating electric-field component accompanying dark matter particles. A conducting surface can convert such da…
▽ More
Many extensions of the Standard Model of particle physics predict a parallel sector of a new U(1) symmetry, giving rise to hidden photons. These hidden photons are candidate particles for cold dark matter. They are expected to kinetically mix with regular photons, which leads to a tiny oscillating electric-field component accompanying dark matter particles. A conducting surface can convert such dark matter particles into photons which are emitted almost perpendicularly to the surface. The corresponding photon frequency follows from the mass of the hidden photons. In this contribution we present a preliminary result on a hidden photon search in the visible and near-UV wavelength range that was done with a large, 14 m2 spherical metallic mirror and discuss future dark matter searches in the eV and sub-eV range by application of different detectors for electromagnetic radiation.
△ Less
Submitted 1 November, 2017;
originally announced November 2017.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Wave propagation modelling in various microearthquake environments using a spectral-element method
Authors:
Hom Nath Gharti,
Volker Oye,
Michael Roth,
Daniela Kuehn
Abstract:
Simulation of wave propagation in a microearthquake environment is often challenging due to small-scale structural and material heterogeneities. We simulate wave propagation in three different real microearthquake environments using a spectral-element method. In the first example, we compute the full wavefield in 2D and 3D models of an underground ore mine, namely the Pyhaesalmi mine in Finland. I…
▽ More
Simulation of wave propagation in a microearthquake environment is often challenging due to small-scale structural and material heterogeneities. We simulate wave propagation in three different real microearthquake environments using a spectral-element method. In the first example, we compute the full wavefield in 2D and 3D models of an underground ore mine, namely the Pyhaesalmi mine in Finland. In the second example, we simulate wave propagation in a homogeneous velocity model including the actual topography of an unstable rock slope at Aaknes in western Norway. Finally, we compute the full wavefield for a weakly anisotropic cylindrical sample at laboratory scale, which was used for an acoustic emission experiment under triaxial loading. We investigate the characteristic features of wave propagation in those models and compare synthetic waveforms with observed waveforms wherever possible. We illustrate the challenges associated with the spectral-element simulation in those models.
△ Less
Submitted 16 June, 2017;
originally announced June 2017.
-
Ion Acceleration - Target Normal Sheath Acceleration
Authors:
M. Roth,
M. Schollmeier
Abstract:
Energetic ions have been observed since the very first laser-plasma experiments.Their origin was found to be the charge separation of electrons heated by thelaser, which transfers energy to the ions accelerated in the field. The adventof ultra-intense lasers with pulse lengths in the femtosecond regime resulted inthe discovery of very energetic ions with characteristics quite different fromthose d…
▽ More
Energetic ions have been observed since the very first laser-plasma experiments.Their origin was found to be the charge separation of electrons heated by thelaser, which transfers energy to the ions accelerated in the field. The adventof ultra-intense lasers with pulse lengths in the femtosecond regime resulted inthe discovery of very energetic ions with characteristics quite different fromthose driven by long-pulse lasers. Discovered in the late 1990s, these ion beamshave become the focus of intense research worldwide, because of their uniqueproperties and high particle numbers. Based on their non-isotropic, beam-likebehaviour, which is always perpendicular to the emitting surface, theacceleration mechanism is called target normal sheath acceleration (TNSA). Weaddress the physics of the mechanism and its dependence on laser and targetparameters. Techniques to explore and diagnose the beams, to make them usefulfor applications, are also addressed.
△ Less
Submitted 30 May, 2017;
originally announced May 2017.
-
Characteristics and stability of soliton crystals in optical fibres for the purpose of optical frequency comb generation
Authors:
M. Zajnulina,
M. Böhm,
D. Bodenmüller,
K. Blow,
J. M. Chavez Boggio,
A. A. Rieznik,
M. M. Roth
Abstract:
We study the properties of a soliton crystal, an bound state of several optical pulses that propagate with a fixed temporal separation through the optical fibres of the proposed approach for generation of optical frequency combs (OFC) for astronomical spectrograph calibration. This approach - also being suitable for subpicosecond pulse generation for other applications - consists of a conventional…
▽ More
We study the properties of a soliton crystal, an bound state of several optical pulses that propagate with a fixed temporal separation through the optical fibres of the proposed approach for generation of optical frequency combs (OFC) for astronomical spectrograph calibration. This approach - also being suitable for subpicosecond pulse generation for other applications - consists of a conventional single-mode fibre and a suitably pumped Erbium-doped fibre. Two continuous-wave lasers are used as light source. The soliton crystal arises out of the initial deeply modulated laser field at low input powers; for higher input powers, it dissolves into free solitons. We study the soliton crystal build-up in the first fibre stage with respect to different fibre parameters (group-velocity dispersion, nonlinearity, and optical losses) and to the light source characteristics (laser frequency separation and intensity difference). We show that the soliton crystal can be described by two quantities, its fundamental frequency and the laser power-threshold at which the crystal dissolves into free solitons. The soliton crystal exhibits features of a linear and nonlinear optical pattern at the same time and is insensitive to the initial laser power fluctuations. We perform our studies using the numerical technique called Soliton Radiation Beat Analysis.
△ Less
Submitted 20 April, 2017;
originally announced April 2017.
-
Generation of optical frequency combs via four-wave mixing processes for low- and medium-resolution astronomy
Authors:
M. Zajnulina,
J. M. Chavez Boggio,
M. Böhm,
A. A. Rieznik,
T. Fremberg,
R. Haynes,
M. M. Roth
Abstract:
We investigate the generation of optical frequency combs through a cascade of four-wave mixing processes in nonlinear fibres with optimised parameters. The initial optical field consists of two continuous-wave lasers with frequency separation larger than 40 GHz (312.7 pm at 1531 nm). It propagates through three nonlinear fibres. The first fibre serves to pulse shape the initial sinusoidal-square p…
▽ More
We investigate the generation of optical frequency combs through a cascade of four-wave mixing processes in nonlinear fibres with optimised parameters. The initial optical field consists of two continuous-wave lasers with frequency separation larger than 40 GHz (312.7 pm at 1531 nm). It propagates through three nonlinear fibres. The first fibre serves to pulse shape the initial sinusoidal-square pulse, while a strong pulse compression down to sub-100 fs takes place in the second fibre which is an amplifying erbium-doped fibre. The last stage is a low-dispersion highly nonlinear fibre where the frequency comb bandwidth is increased and the line intensity is equalised. We model this system using the generalised nonlinear Schrödinger equation and investigate it in terms of fibre lengths, fibre dispersion, laser frequency separation and input powers with the aim to minimise the frequency comb noise. With the support of the numerical results, a frequency comb is experimentally generated, first in the near infra-red and then it is frequency-doubled into the visible spectral range. Using a MUSE-type spectrograph, we evaluate the comb performance for astronomical wavelength calibration in terms of equidistancy of the comb lines and their stability.
△ Less
Submitted 17 April, 2017;
originally announced April 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Guiding of relativistic electron beams in dense matter by longitudinally imposed strong magnetic fields
Authors:
M. Bailly-Grandvaux,
J. J. Santos,
C. Bellei,
P. Forestier-Colleoni,
S. Fujioka,
L. Giuffrida,
J. J. Honrubia,
D. Batani,
R. Bouillaud,
M. Chevrot,
J. E. Cross,
R. Crowston,
S. Dorard,
J. -L. Dubois,
M. Ehret,
G. Gregori,
S. Hulin,
S. Kojima,
E. Loyez,
J. -R. Marques,
A. Morace,
Ph. Nicolai,
M. Roth,
S. Sakata,
G. Schaumann
, et al. (5 additional authors not shown)
Abstract:
High-energy-density flows through dense matter are needed for effective progress in the production of laser-driven intense sources of energetic particles and radiation, in driving matter to extreme temperatures creating state regimes relevant for planetary or stellar science as yet inaccessible at the laboratory scale, or in achieving high-gain laser-driven thermonuclear fusion. When interacting a…
▽ More
High-energy-density flows through dense matter are needed for effective progress in the production of laser-driven intense sources of energetic particles and radiation, in driving matter to extreme temperatures creating state regimes relevant for planetary or stellar science as yet inaccessible at the laboratory scale, or in achieving high-gain laser-driven thermonuclear fusion. When interacting at the surface of dense (opaque) targets, intense lasers accelerate relativistic electron beams which transport a significant fraction of the laser energy into the target depth. However, the overall laser-to-target coupling efficiency is impaired by the large divergence of the electron beam, intrinsic to the laser-plasma interaction. By imposing a longitudinal 600T laser-driven magnetic-field, our experimental results show guided >10MA-current of MeV-electrons in solid matter. Due to the applied magnetic field, the transported energy-density and the peak background electron temperature at the 60micron-thick targets rear surface rise by factors 5, resulting from unprecedentedly efficient guiding of relativistic electron currents.
△ Less
Submitted 29 August, 2016;
originally announced August 2016.
-
Astronomical photonics in the context of infrared interferometry and high-resolution spectroscopy
Authors:
Lucas Labadie,
Jean-Philippe Berger,
Nick Cvetojevic,
Roger Haynes,
Robert Harris,
Nemanja Jovanovic,
Sylvestre Lacour,
Guillermo Martin,
Stefano Minardi,
Guy Perrin,
Martin Roth,
Robert R. Thomson
Abstract:
We review the potential of Astrophotonics, a relatively young field at the interface between photonics and astronomical instrumentation, for spectro-interferometry. We review some fundamental aspects of photonic science that drove the emer- gence of astrophotonics, and highlight the achievements in observational astrophysics. We analyze the prospects for further technological development also cons…
▽ More
We review the potential of Astrophotonics, a relatively young field at the interface between photonics and astronomical instrumentation, for spectro-interferometry. We review some fundamental aspects of photonic science that drove the emer- gence of astrophotonics, and highlight the achievements in observational astrophysics. We analyze the prospects for further technological development also considering the potential synergies with other fields of physics (e.g. non-linear optics in condensed matter physics). We also stress the central role of fiber optics in routing and transporting light, delivering complex filters, or interfacing instruments and telescopes, more specifically in the context of a growing usage of adaptive optics.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
Multicore fibre technology - the road to multimode photonics
Authors:
Joss Bland-Hawthorn,
Seong-Sik Min,
Emma Lindley,
Sergio Leon-Saval,
Simon Ellis,
John Lawrence,
Martin Roth,
Hans-Gerd Lohmannsroben,
Sylvain Veilleux
Abstract:
For the past forty years, optical fibres have found widespread use in ground-based and space-based instruments. In most applications, these fibres are used in conjunction with conventional optics to transport light. But photonics offers a huge range of optical manipulations beyond light transport that were rarely exploited before 2001. The fundamental obstacle to the broader use of photonics is th…
▽ More
For the past forty years, optical fibres have found widespread use in ground-based and space-based instruments. In most applications, these fibres are used in conjunction with conventional optics to transport light. But photonics offers a huge range of optical manipulations beyond light transport that were rarely exploited before 2001. The fundamental obstacle to the broader use of photonics is the difficulty of achieving photonic action in a multimode fibre. The first step towards a general solution was the invention of the photonic lantern (Leon-Saval, Birks & Bland-Hawthorn 2005) and the delivery of high-efficiency devices (< 1 dB loss) five years on (Noordegraaf et al 2009). Multicore fibres (MCF), used in conjunction with lanterns, are now enabling an even bigger leap towards multimode photonics. Until recently, the single-moded cores in MCFs were not sufficiently uniform to achieve telecom (SMF-28) performance. Now that high-quality MCFs have been realized, we turn our attention to printing complex functions (e.g. Bragg gratings for OH suppression) into their N cores. Our first work in this direction used a Mach-Zehnder interferometer (near-field phase mask) but this approach was only adequate for N=7 MCFs as measured by the grating uniformity (Lindley et al 2014). We have now built a Sagnac interferometer that gives a three-fold increase in the depth of field sufficient to print across N > 127 cores. We achieved first light this year with our 500mW Sabre FRED laser. These are sophisticated and complex interferometers. We report on our progress to date and summarize our first-year goals which include multimode OH suppression fibres for the Anglo-Australian Telescope/PRAXIS instrument and the Discovery Channel Telescope/MOHSIS instrument under development at the University of Maryland.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
-
Experimental observation of $β$-delayed neutrons from $^{9}$Li as a way to study short-pulse laser-driven deuteron production
Authors:
Andrea Favalli,
Nevzat Guler,
Daniela Henzlova,
Katerina Falk,
Stephen Croft,
Donald C. Gautier,
Kiril D. Ianakiev,
Metodi Iliev,
Sasikumar Palaniyappan,
Markus Roth,
Juan C. Fernandez,
Martyn T. Swinhoe
Abstract:
A short-pulse laser-driven deuteron beam is generated in the relativistic transparency regime and aimed at a beryllium converter to generate neutrons at the TRIDENT laser facility. These prompt neutrons have been used for active interrogation to detect nuclear materials, the first such demonstration of a laser-driven neutron source. During the experiments, delayed neutrons from $^9$Li decay was ob…
▽ More
A short-pulse laser-driven deuteron beam is generated in the relativistic transparency regime and aimed at a beryllium converter to generate neutrons at the TRIDENT laser facility. These prompt neutrons have been used for active interrogation to detect nuclear materials, the first such demonstration of a laser-driven neutron source. During the experiments, delayed neutrons from $^9$Li decay was observed. It was identified by its characteristic half-life of 178.3 ms. Production is attributed to the nuclear reactions $^9$Be(d,2p)$^9$Li and $^9$Be(n,p)$^9$Li inside the beryllium converter itself. These reactions have energy thresholds of 18.42 and 14.26 MeV respectively, and we estimate the (d,2p) reaction to be the dominant source of $^9$Li production. Therefore, only the higher-energy portion of the deuteron spectrum contributes to the production of the delayed neutrons. It was observed that the delayed-neutron yield decreases with increasing distance between the converter and the deuteron source. This behavior is consistent with deuteron production with energy greater than $\sim$20 MeV within a cone with a half-angle greater than 40$^{\circ}$. Prompt-neutron time-of-flight measurements at varying separation between the converter and the laser target indicate that the fast deuteron population above threshold is severely depleted on axis out to $\sim$20$^{\circ}$. These measurements are consistent with emission of the fast deuterons (i.e., above 10 MeV/nucleon) in a ring-like fashion around the central axis. Such an inferred ring-like structure is qualitatively consistent with a documented signature of the breakout afterburner (BOA) laser-plasma ion acceleration mechanism. The measurement of $β$-delayed neutrons from $^9$Li decay could provide an important new diagnostic tool for the study of the features of the deuteron production mechanism in a non-intrusive way.
△ Less
Submitted 18 May, 2016;
originally announced May 2016.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Measurements of $π^{\pm}$ differential yields from the surface of the T2K replica target for incoming 31 GeV/c protons with the NA61/SHINE spectrometer at the CERN SPS
Authors:
NA61/SHINE Collaboration,
:,
N. Abgrall,
A. Aduszkiewicz,
M. Ajaz,
Y. Ali,
E. Andronov,
T. Antićić,
N. Antoniou,
B. Baatar,
F. Bay,
A. Blondel,
J. Blümer,
M. Bogomilov,
A. Brandin,
A. Bravar,
J. Brzychczyk,
S. A. Bunyatov,
O. Busygina,
P. Christakoglou,
M. Ćirković,
T. Czopowicz,
N. Davis,
S. Debieux,
H. Dembinski
, et al. (135 additional authors not shown)
Abstract:
Measurements of particle emission from a replica of the T2K 90 cm-long carbon target were performed in the NA61/SHINE experiment at CERN SPS, using data collected during a high-statistics run in 2009. An efficient use of the long-target measurements for neutrino flux predictions in T2K requires dedicated reconstruction and analysis techniques. Fully-corrected differential yields of $π^\pm$-mesons…
▽ More
Measurements of particle emission from a replica of the T2K 90 cm-long carbon target were performed in the NA61/SHINE experiment at CERN SPS, using data collected during a high-statistics run in 2009. An efficient use of the long-target measurements for neutrino flux predictions in T2K requires dedicated reconstruction and analysis techniques. Fully-corrected differential yields of $π^\pm$-mesons from the surface of the T2K replica target for incoming 31 GeV/c protons are presented. A possible strategy to implement these results into the T2K neutrino beam predictions is discussed and the propagation of the uncertainties of these results to the final neutrino flux is performed.
△ Less
Submitted 29 November, 2016; v1 submitted 22 March, 2016;
originally announced March 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
The FUNK search for Hidden Photon Dark Matter in the eV range
Authors:
Babette Döbrich,
Kai Daumiller,
Ralph Engel,
Joerg Jaeckel,
Marek Kowalski,
Axel Lindner,
Hermann-Josef Mathes,
Javier Redondo,
Markus Roth,
Christoph Schäfer,
Ralf Ulrich,
Darko Veberic
Abstract:
We give a brief update on the search for Hidden Photon Dark Matter with FUNK. The experiment uses a large spherical mirror, which, if Hidden Photon Dark Matter exists in the accessible mass and coupling parameter range, would yield an optical signal in the mirror's center in an otherwise dark environment. After a test run with a CCD, preparations for a run with a low-noise PMT are under way and de…
▽ More
We give a brief update on the search for Hidden Photon Dark Matter with FUNK. The experiment uses a large spherical mirror, which, if Hidden Photon Dark Matter exists in the accessible mass and coupling parameter range, would yield an optical signal in the mirror's center in an otherwise dark environment. After a test run with a CCD, preparations for a run with a low-noise PMT are under way and described in this proceedings.
△ Less
Submitted 20 October, 2015;
originally announced October 2015.
-
Search for dark matter in the hidden-photon sector with a large spherical mirror
Authors:
The FUNK Experiment,
:,
Darko Veberič,
Kai Daumiller,
Babette Döbrich,
Ralph Engel,
Joerg Jaeckel,
Marek Kowalski,
Axel Lindner,
Hermann-Josef Mathes,
Javier Redondo,
Markus Roth,
Christoph M. Schäfer,
Ralf Ulrich
Abstract:
If dark matter consists of hidden-sector photons which kinetically mix with regular photons, a tiny oscillating electric-field component is present wherever we have dark matter. In the surface of conducting materials this induces a small probability to emit single photons almost perpendicular to the surface, with the corresponding photon frequency matching the mass of the hidden photons. We report…
▽ More
If dark matter consists of hidden-sector photons which kinetically mix with regular photons, a tiny oscillating electric-field component is present wherever we have dark matter. In the surface of conducting materials this induces a small probability to emit single photons almost perpendicular to the surface, with the corresponding photon frequency matching the mass of the hidden photons. We report on a construction of an experimental setup with a large ~14 m2 spherical metallic mirror that will allow for searches of hidden-photon dark matter in the eV and sub-eV range by application of different electromagnetic radiation detectors. We discuss sensitivity and accessible regions in the dark matter parameter space.
△ Less
Submitted 9 September, 2015; v1 submitted 8 September, 2015;
originally announced September 2015.
-
Revised absolute amplitude calibration of the LOPES experiment
Authors:
K. Link,
T. Huege,
W. D. Apel,
J. C. Arteaga-Velázquez,
L. Bähren,
K. Bekk,
M. Bertaina,
P. L. Biermann,
J. Blümer,
H. Bozdog,
I. M. Brancus,
E. Cantoni,
A. Chiavassa,
K. Daumiller,
V. de Souza,
F. Di Pierro,
P. Doll,
R. Engel,
H. Falcke,
B. Fuchs,
H. Gemmeke,
C. Grupen,
A. Haungs,
D. Heck,
R. Hiller
, et al. (32 additional authors not shown)
Abstract:
One of the main aims of the LOPES experiment was the evaluation of the absolute amplitude of the radio signal of air showers. This is of special interest since the radio technique offers the possibility for an independent and highly precise determination of the energy scale of cosmic rays on the basis of signal predictions from Monte Carlo simulations. For the calibration of the amplitude measured…
▽ More
One of the main aims of the LOPES experiment was the evaluation of the absolute amplitude of the radio signal of air showers. This is of special interest since the radio technique offers the possibility for an independent and highly precise determination of the energy scale of cosmic rays on the basis of signal predictions from Monte Carlo simulations. For the calibration of the amplitude measured by LOPES we used an external source. Previous comparisons of LOPES measurements and simulations of the radio signal amplitude predicted by CoREAS revealed a discrepancy of the order of a factor of two. A re-measurement of the reference calibration source, now performed for the free field, was recently performed by the manufacturer. The updated calibration values lead to a lowering of the reconstructed electric field measured by LOPES by a factor of $2.6 \pm 0.2$ and therefore to a significantly better agreement with CoREAS simulations. We discuss the updated calibration and its impact on the LOPES analysis results.
△ Less
Submitted 14 August, 2015;
originally announced August 2015.
-
Calibration of Time Of Flight Detectors Using Laser-driven Neutron Source
Authors:
S. R. Mirfayzi,
S. Kar,
H. Ahmed,
A. G. Krygier,
A. Green,
A. Alejo,
R. Clarke,
R. R. Freeman,
J. Fuchs,
D. Jung,
A. Kleinschmidt,
J. T. Morrison,
Z. Najmudin,
H. Nakamura,
P. Norreys,
M. Oliver,
M. Roth,
L. Vassura,
M. Zepf,
M. Borghesi
Abstract:
Calibration of three scintillators (EJ232Q, BC422Q and EJ410) in a time-of-flight (TOF) arrangement using a laser drive-neutron source is presented. The three plastic scintillator detectors were calibrated with gamma insensitive bubble detector spectrometers, which were absolutely calibrated over a wide range of neutron energies ranging from sub MeV to 20 MeV. A typical set of data obtained simult…
▽ More
Calibration of three scintillators (EJ232Q, BC422Q and EJ410) in a time-of-flight (TOF) arrangement using a laser drive-neutron source is presented. The three plastic scintillator detectors were calibrated with gamma insensitive bubble detector spectrometers, which were absolutely calibrated over a wide range of neutron energies ranging from sub MeV to 20 MeV. A typical set of data obtained simultaneously by the detectors are shown, measuring the neutron spectrum emitted from a petawatt laser irradiated thin foil.
△ Less
Submitted 15 June, 2015;
originally announced June 2015.
-
Solar Dynamics, Rotation, Convection and Overshoot
Authors:
S. Hanasoge,
M. S. Miesch,
M. Roth,
J. Schou,
M. Schuessler,
M. J. Thompson
Abstract:
We discuss recent observational, theoretical and modeling progress made in understanding the Sun's internal dynamics, including its rotation, meridional flow, convection and overshoot. Over the past few decades, substantial theoretical and observational effort has gone into appreciating these aspects of solar dynamics. A review of these observations, related helioseismic methodology and inference…
▽ More
We discuss recent observational, theoretical and modeling progress made in understanding the Sun's internal dynamics, including its rotation, meridional flow, convection and overshoot. Over the past few decades, substantial theoretical and observational effort has gone into appreciating these aspects of solar dynamics. A review of these observations, related helioseismic methodology and inference and computational results in relation to these problems is undertaken here.
△ Less
Submitted 30 March, 2015;
originally announced March 2015.