-
Tailoring hot-carrier distributions of plasmonic nanostructures through surface alloying
Authors:
Jakub Fojt,
Tuomas P. Rossi,
Priyank V. Kumar,
Paul Erhart
Abstract:
Alloyed metal nanoparticles are a promising platform for plasmonically enabled hot-carrier generation, which can be used to drive photochemical reactions. Although the non-plasmonic component in these systems has been investigated for its potential to enhance catalytic activity, its capacity to affect the photochemical process favorably has been underexplored by comparison. Here, we study the impa…
▽ More
Alloyed metal nanoparticles are a promising platform for plasmonically enabled hot-carrier generation, which can be used to drive photochemical reactions. Although the non-plasmonic component in these systems has been investigated for its potential to enhance catalytic activity, its capacity to affect the photochemical process favorably has been underexplored by comparison. Here, we study the impact of surface alloy species and concentration on hot-carrier generation in Ag nanoparticles. By first-principles simulations, we photoexcite the localized surface plasmon, allow it to dephase, and calculate spatially and energetically resolved hot-carrier distributions. We show that the presence of non-noble species in the topmost surface layer drastically enhances hot-hole generation at the surface at the expense of hot-hole generation in the bulk, due to the additional d-type states that are introduced to the surface. The energy of the generated holes can be tuned by choice of the alloyant, with systematic trends across the d-band block. Already low surface alloy concentrations have a large impact, with a saturation of the enhancement effect typically close to 75% of a monolayer. Hot-electron generation at the surface is hindered slightly by alloying but here an judicious choice of the alloy composition allows one to strike a balance between hot electrons and holes. In this context, it is also important to consider that increasing the alloy concentration broadens the localized surface plasmon resonance, and thus decreases hot-carrier generation overall. Our work underscores the promise of utilizing multicomponent nanoparticles to achieve enhanced control over plasmonic catalysis, and provides guidelines for how hot-carrier distributions can be tailored by designing the electronic structure of the surface through alloying.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Single-atom dopants in plasmonic nanocatalysts
Authors:
Daniel Sorvisto,
Patrick Rinke,
Tuomas P. Rossi
Abstract:
Bimetallic nanostructures combining plasmonic and catalytic metals are promising for tailoring and enhancing plasmonic hot-carrier generation utilized in plasmonic catalysis. In this work, we study the plasmonic hot-carrier generation in noble metal nanoparticles (Ag, Au, Cu) with single-atom dopants (Ag, Au, Cu, Pd, Pt) with first-principles time-dependent density-functional theory calculations.…
▽ More
Bimetallic nanostructures combining plasmonic and catalytic metals are promising for tailoring and enhancing plasmonic hot-carrier generation utilized in plasmonic catalysis. In this work, we study the plasmonic hot-carrier generation in noble metal nanoparticles (Ag, Au, Cu) with single-atom dopants (Ag, Au, Cu, Pd, Pt) with first-principles time-dependent density-functional theory calculations. Our results show that the local hot-carrier generation at the dopant atom is significantly altered by the dopant element while the plasmonic response of the nanoparticle as a whole is not significantly affected. In particular, hot holes at the dopant atom originate from the discrete d-electron states of the dopant. The energies of these d-electron states, and hence those of the hot holes, depend on the dopant element, which opens up the possibility to tune hot-carrier generation with suitable dopants.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
Hot-carrier transfer across a nanoparticle-molecule junction: The importance of orbital hybridization and level alignment
Authors:
Jakub Fojt,
Tuomas P Rossi,
Paul Erhart
Abstract:
While direct hot-carrier transfer can increase photo-catalytic activity, it is difficult to discern experimentally and competes with several other mechanisms. To shed light on these aspects, here, we model from first principles hot-carrier generation across the interface between plasmonic nanoparticles and a CO molecule. The hot-electron transfer probability depends non-monotonically on the nanopa…
▽ More
While direct hot-carrier transfer can increase photo-catalytic activity, it is difficult to discern experimentally and competes with several other mechanisms. To shed light on these aspects, here, we model from first principles hot-carrier generation across the interface between plasmonic nanoparticles and a CO molecule. The hot-electron transfer probability depends non-monotonically on the nanoparticle-molecule distance and can be effective at long distances, well outside the region of chemisorption; hot-hole transfer on the other hand is limited to shorter distances. These observations can be explained by the energetic alignment between molecular and nanoparticle states as well as the excitation frequency. The hybridization of the molecular orbitals is the key predictor for hot-carrier transfer in these systems, emphasizing the need to include the effects of ground state hybridization for accurate predictions. Finally, we show a non-trivial dependence of the hot-carrier distribution on the excitation energy, which could be exploited when optimizing photo-catalytic systems.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
An Electrically Conductive Oleogel Paste for Edible Electronics
Authors:
Pietro Cataldi,
Leonardo Lamanna,
Claudia Bertei,
Federica Arena,
Pietro Rossi,
Mufeng Liu,
Fabio Di Fonzo,
Dimitrios G. Papageorgiou,
Alessandro Luzio,
Mario Caironi
Abstract:
Edible electronics will facilitate point-of-care testing through safe and cheap devices that are digested or degraded in the body or environment after performing a specific function. Its thrive depends on creating a library of materials that are the basic building blocks for eatable technologies. Edible electrical conductors fabricated with green methods that allow production at a large scale and…
▽ More
Edible electronics will facilitate point-of-care testing through safe and cheap devices that are digested or degraded in the body or environment after performing a specific function. Its thrive depends on creating a library of materials that are the basic building blocks for eatable technologies. Edible electrical conductors fabricated with green methods that allow production at a large scale and composed of food derivatives, ingestible in large amounts without risk for human health are needed. Here, conductive pastes made with materials with a high tolerable upper intake limit (major of mg/kg body weight /day) are proposed. Conductive oleogel paste composites, made with biodegradable and food-grade materials like natural waxes, oils, and activated carbon conductive fillers, are presented. The proposed pastes are compatible with manufacturing processes such as direct ink writing and thus are suitable for an industrial scale-up. These conductors are built without the use of solvents, and with tunable electromechanical features and adhesion depending on the composition. They have antibacterial and hydrophobic properties, so that they can be used in contact with food preventing contamination and preserving its organoleptic properties. As a proof-of-principle application, the edible conductive pastes are demonstrated to be effective edible contacts for food impedance analysis, to be integrated for example in smart fruit labels for ripening monitoring.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Computational Design of Alloy Nanostructures for Optical Sensing of Hydrogen
Authors:
Pernilla Ekborg-Tanner,
J. Magnus Rahm,
Victor Rosendal,
Maria Bancerek,
Tuomas P. Rossi,
Tomasz J. Antosiewicz,
Paul Erhart
Abstract:
Pd nanoalloys show great potential as hysteresis-free, reliable hydrogen sensors. Here, a multi-scale modeling approach is employed to determine optimal conditions for optical hydrogen sensing using the Pd-Au-H system. Changes in hydrogen pressure translate to changes in hydrogen content and eventually the optical spectrum. At the single particle level, the shift of the plasmon peak position with…
▽ More
Pd nanoalloys show great potential as hysteresis-free, reliable hydrogen sensors. Here, a multi-scale modeling approach is employed to determine optimal conditions for optical hydrogen sensing using the Pd-Au-H system. Changes in hydrogen pressure translate to changes in hydrogen content and eventually the optical spectrum. At the single particle level, the shift of the plasmon peak position with hydrogen concentration (i.e., the "optical" sensitivity) is approximately constant at 180 nm/c_H for nanodisk diameters >~ 100 nm. For smaller particles, the optical sensitivity is negative and increases with decreasing diameter, due to the emergence of a second peak originating from coupling between a localized surface plasmon and interband transitions. In addition to tracking peak position, the onset of extinction as well as extinction at fixed wavelengths is considered. We carefully compare the simulation results with experimental data and assess the potential sources for discrepancies. Invariably, the results suggest that there is an upper bound for the optical sensitivity that cannot be overcome by engineering composition and/or geometry. While the alloy composition has a limited impact on optical sensitivity, it can strongly affect H uptake and consequently the "thermodynamic" sensitivity and the detection limit. Here, it is shown how the latter can be improved by compositional engineering and even substantially enhanced via the formation of an ordered phase that can be synthesized at higher hydrogen partial pressures.
△ Less
Submitted 30 June, 2022; v1 submitted 13 April, 2022;
originally announced April 2022.
-
Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report
Authors:
R. Abdul Khalek,
A. Accardi,
J. Adam,
D. Adamiak,
W. Akers,
M. Albaladejo,
A. Al-bataineh,
M. G. Alexeev,
F. Ameli,
P. Antonioli,
N. Armesto,
W. R. Armstrong,
M. Arratia,
J. Arrington,
A. Asaturyan,
M. Asai,
E. C. Aschenauer,
S. Aune,
H. Avagyan,
C. Ayerbe Gayoso,
B. Azmoun,
A. Bacchetta,
M. D. Baker,
F. Barbosa,
L. Barion
, et al. (390 additional authors not shown)
Abstract:
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon…
▽ More
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and develo** detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions.
This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter
△ Less
Submitted 26 October, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
Feature Selection based on Principal Component Analysis for Underwater Source Localization by Deep Learning
Authors:
Xiaoyu Zhu,
Hefeng Dong,
Pierluigi Salvo Rossi,
Martin Landrø
Abstract:
In this paper, we propose an interpretable feature selection method based on principal component analysis (PCA) and principal component regression (PCR), which can extract important features for underwater source localization by only introducing the source location without other prior information. This feature selection method is combined with a two-step framework for underwater source localizatio…
▽ More
In this paper, we propose an interpretable feature selection method based on principal component analysis (PCA) and principal component regression (PCR), which can extract important features for underwater source localization by only introducing the source location without other prior information. This feature selection method is combined with a two-step framework for underwater source localization based on the semi-supervised learning scheme. In the framework, the first step utilizes a convolutional autoencoder to extract the latent features from the whole available dataset. The second step performs source localization via an encoder multi-layer perceptron (MLP) trained on a limited labeled portion of the dataset. The proposed approach has been validated on the public dataset SwllEx-96 Event S5. The result shows the framework has appealing accuracy and robustness on the unseen data, especially when the number of data used to train gradually decreases. After feature selection, not only the training stage has a 95\% acceleration but the performance of the framework becomes more robust on the depth and more accurate when the number of labeled data used to train is extremely limited.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Multiple subglacial water bodies below the south pole of Mars unveiled by new MARSIS data
Authors:
Sebastian Emanuel Lauro,
Elena Pettinelli,
Graziella Caprarelli,
Luca Guallini,
Angelo Pio Rossi,
Elisabetta Mattei,
Barbara Cosciotti,
Andrea Cicchetti,
Francesco Soldovieri,
Marco Cartacci,
Federico Di Paolo,
Raffaella Noschese,
Roberto Orosei
Abstract:
The detection of liquid water by the Mars Advanced Radar for Subsurface and Ionosphere Sounding (MARSIS) at the base of the south polar layered deposits in Ultimi Scopuli has reinvigorated the debate about the origin and stability of liquid water under present-day Martian conditions. To establish the extent of subglacial water in this region, we acquired new data, achieving extended radar coverage…
▽ More
The detection of liquid water by the Mars Advanced Radar for Subsurface and Ionosphere Sounding (MARSIS) at the base of the south polar layered deposits in Ultimi Scopuli has reinvigorated the debate about the origin and stability of liquid water under present-day Martian conditions. To establish the extent of subglacial water in this region, we acquired new data, achieving extended radar coverage over the study area. Here, we present and discuss the results obtained by a new method of analysis of the complete MARSIS dataset, based on signal processing procedures usually applied to terrestrial polar ice sheets. Our results strengthen the claim of the detection of a liquid water body at Ultimi Scopuli and indicate the presence of other wet areas nearby. We suggest that the waters are hypersaline perchlorate brines, known to form at Martian polar regions and thought to survive for an extended period of time on a geological scale at below-eutectic temperatures.
△ Less
Submitted 2 October, 2020;
originally announced October 2020.
-
Real-Time Time-Dependent Density Functional Theory Implementation of Electronic Circular Dichroism Applied to Nanoscale Metal-Organic Clusters
Authors:
Esko Makkonen,
Tuomas P. Rossi,
Ask Hjorth Larsen,
Olga Lopez-Acevedo,
Patrick Rinke,
Mikael Kuisma,
Xi Chen
Abstract:
Electronic circular dichroism (ECD) is a powerful spectroscopical method for investigating chiral properties at the molecular level. ECD calculations with the commonly used linear-response time-dependent density functional theory (LR-TDDFT) framework can be prohibitively costly for large systems. To alleviate this problem, we present here an ECD implementation for the projector augmented-wave meth…
▽ More
Electronic circular dichroism (ECD) is a powerful spectroscopical method for investigating chiral properties at the molecular level. ECD calculations with the commonly used linear-response time-dependent density functional theory (LR-TDDFT) framework can be prohibitively costly for large systems. To alleviate this problem, we present here an ECD implementation for the projector augmented-wave method in the real-time-propagation TDDFT (RT-TDDFT) framework in the open-source GPAW code. Our implementation supports both local atomic basis set and real-space finite-difference representations of wave functions. We benchmark our implementation against an existing LR-TDDFT implementation in GPAW for small chiral molecules. We then demonstrate the efficiency of our local atomic basis set implementation for a large hybrid nanocluster.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
Hot-Carrier Generation in Plasmonic Nanoparticles: The Importance of Atomic Structure
Authors:
Tuomas P. Rossi,
Paul Erhart,
Mikael Kuisma
Abstract:
Metal nanoparticles are attractive for plasmon-enhanced generation of hot carriers, which may be harnessed in photochemical reactions. In this work, we analyze the coherent femtosecond dynamics of photon absorption, plasmon formation, and subsequent hot-carrier generation through plasmon dephasing using first-principles simulations. We predict the energetic and spatial hot-carrier distributions in…
▽ More
Metal nanoparticles are attractive for plasmon-enhanced generation of hot carriers, which may be harnessed in photochemical reactions. In this work, we analyze the coherent femtosecond dynamics of photon absorption, plasmon formation, and subsequent hot-carrier generation through plasmon dephasing using first-principles simulations. We predict the energetic and spatial hot-carrier distributions in small metal nanoparticles and show that the distribution of hot electrons is very sensitive to the local structure. Our results show that surface sites exhibit enhanced hot-electron generation in comparison to the bulk of the nanoparticle. While the details of the distribution depend on particle size and shape, as a general trend lower-coordinated surface sites such as corners, edges, and {100} facets exhibit a higher proportion of hot electrons than higher-coordinated surface sites such as {111} facets or the core sites. The present results thereby demonstrate how hot carriers could be tailored by careful design of atomic-scale structures in nanoscale systems.
△ Less
Submitted 29 July, 2020; v1 submitted 27 February, 2020;
originally announced February 2020.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab -- 2018 update to PR12-16-001
Authors:
M. Battaglieri,
A. Bersani,
G. Bracco,
B. Caiffi,
A. Celentano,
R. De Vita,
L. Marsicano,
P. Musico,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondi',
P. Castorina,
M. De Napoli,
A. Italiano,
V. Kuznetzov,
E. Leonora,
F. Mammoliti,
N. Randazzo,
L. Re,
G. Russo,
M. Russo,
A. Shahinyan
, et al. (100 additional authors not shown)
Abstract:
This document complements and completes what was submitted last year to PAC45 as an update to the proposal PR12-16-001 "Dark matter search in a Beam-Dump eXperiment (BDX)" at Jefferson Lab submitted to JLab-PAC44 in 2016. Following the suggestions contained in the PAC45 report, in coordination with the lab, we ran a test to assess the beam-related backgrounds and validate the simulation framework…
▽ More
This document complements and completes what was submitted last year to PAC45 as an update to the proposal PR12-16-001 "Dark matter search in a Beam-Dump eXperiment (BDX)" at Jefferson Lab submitted to JLab-PAC44 in 2016. Following the suggestions contained in the PAC45 report, in coordination with the lab, we ran a test to assess the beam-related backgrounds and validate the simulation framework used to design the BDX experiment. Using a common Monte Carlo framework for the test and the proposed experiment, we optimized the selection cuts to maximize the reach considering simultaneously the signal, cosmic-ray background (assessed in Catania test with BDX-Proto) and beam-related backgrounds (irreducible NC and CC neutrino interactions as determined by simulation). Our results confirmed what was presented in the original proposal: with 285 days of a parasitic run at 65 $μ$A (corresponding to $10^{22}$ EOT) the BDX experiment will lower the exclusion limits in the case of no signal by one to two orders of magnitude in the parameter space of dark-matter coupling versus mass.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
Strong plasmon-molecule coupling at the nanoscale revealed by first-principles modeling
Authors:
Tuomas P. Rossi,
Timur Shegai,
Paul Erhart,
Tomasz J. Antosiewicz
Abstract:
Strong light-matter interactions in both the single-emitter and collective strong coupling regimes attract significant attention due to emerging quantum and nonlinear optics applications, as well as opportunities for modifying material-related properties. Further exploration of these phenomena requires an appropriate theoretical methodology, which is demanding since polaritons are at the intersect…
▽ More
Strong light-matter interactions in both the single-emitter and collective strong coupling regimes attract significant attention due to emerging quantum and nonlinear optics applications, as well as opportunities for modifying material-related properties. Further exploration of these phenomena requires an appropriate theoretical methodology, which is demanding since polaritons are at the intersection between quantum optics, solid state physics and quantum chemistry. Fortunately, however, nanoscale polaritons can be realized in small plasmon-molecule systems, which in principle allows treating them using ab initio methods, although this has not been demonstrated to date. Here, we show that time-dependent density-functional theory (TDDFT) calculations can access the physics of nanoscale plasmon-molecule hybrids and predict vacuum Rabi splitting in a system comprising a few-hundred-atom aluminum nanoparticle interacting with one or several benzene molecules. We show that the cavity quantum electrodynamics approach holds down to resonators on the order of a few cubic nanometers, yielding a single-molecule coupling strength exceeding 200 meV due to a massive vacuum field value of 4.5 V/nm. In a broader perspective, our approach enables parameter-free in-depth studies of polaritonic systems, including ground state, chemical and thermodynamic modifications of the molecules in the strong-coupling regime, which may find important use in emerging applications such as cavity enhanced catalysis.
△ Less
Submitted 3 April, 2019;
originally announced April 2019.
-
Bibliometrics for collaboration works
Authors:
Paolo Rossi,
Alessandro Strumia,
Riccardo Torre
Abstract:
An important issue in bibliometrics is the weighing of co-authorship in the production of scientific collaborations, which are becoming the standard modality of research activity in many disciplines. The problem is especially relevant in the field of high-energy physics, where collaborations reach 3000 authors, but it can no longer be ignored also in other domains, like medicine or biology. We pre…
▽ More
An important issue in bibliometrics is the weighing of co-authorship in the production of scientific collaborations, which are becoming the standard modality of research activity in many disciplines. The problem is especially relevant in the field of high-energy physics, where collaborations reach 3000 authors, but it can no longer be ignored also in other domains, like medicine or biology. We present theoretical and numerical arguments in favour of weighing the individual contributions as $1/N_{\rm aut}^α$ where $N_{\rm aut}$ is the number of co-authors. When counting citations we suggest the exponent $α\approx 1$, that corresponds to fractional counting. When counting the number of papers we suggest $α\approx 1/3 - 1/2$, with the former (latter) value more appropriate for larger (smaller) collaborations. We expect and verify that the $h$ index scales as the square root of the average number of co-authors, and define a fractionalized $h$ index that does not scale with collaboration size.
△ Less
Submitted 14 July, 2020; v1 submitted 1 February, 2019;
originally announced February 2019.
-
FAMU: study of the energy dependent transfer rate $Λ_{μp \rightarrow μO}$
Authors:
FAMU Collaboration,
E. Mocchiutti,
V. Bonvicini,
M. Danailov,
E. Furlanetto,
K. S. Gadedjisso-Tossou,
D. Guffanti,
C. Pizzolotto,
A. Rachevski,
L. Stoychev,
E. Vallazza,
G. Zampa,
J. Niemela,
K. Ishida,
A. Adamczak,
G. Baccolo,
R. Benocci,
R. Bertoni,
M. Bonesini,
F. Chignoli,
M. Clemenza,
A. Curioni,
V. Maggi,
R. Mazza,
M. Moretti
, et al. (31 additional authors not shown)
Abstract:
The main goal of the FAMU experiment is the measurement of the hyperfine splitting (hfs) in the 1S state of muonic hydrogen $ΔE_{hfs}(μ^-p)1S$. The physical process behind this experiment is the following: $μp$ are formed in a mixture of hydrogen and a higher-Z gas. When absorbing a photon at resonance-energy $ΔE_{hfs}\approx0.182$~eV, in subsequent collisions with the surrounding $H_2$ molecules,…
▽ More
The main goal of the FAMU experiment is the measurement of the hyperfine splitting (hfs) in the 1S state of muonic hydrogen $ΔE_{hfs}(μ^-p)1S$. The physical process behind this experiment is the following: $μp$ are formed in a mixture of hydrogen and a higher-Z gas. When absorbing a photon at resonance-energy $ΔE_{hfs}\approx0.182$~eV, in subsequent collisions with the surrounding $H_2$ molecules, the $μp$ is quickly de-excited and accelerated by $\sim2/3$ of the excitation energy. The observable is the time distribution of the K-lines X-rays emitted from the $μZ$ formed by muon transfer $(μp) +Z \rightarrow (μZ)^*+p$, a reaction whose rate depends on the $μp$ kinetic energy. The maximal response, to the tuned laser wavelength, of the time distribution of X-ray from K-lines of the $(μZ)^*$ cascade indicate the resonance. During the preparatory phase of the FAMU experiment, several measurements have been performed both to validate the methodology and to prepare the best configuration of target and detectors for the spectroscopic measurement. We present here the crucial study of the energy dependence of the transfer rate from muonic hydrogen to oxygen ($Λ_{μp \rightarrow μO}$), precisely measured for the first time.
△ Less
Submitted 22 January, 2019; v1 submitted 20 August, 2018;
originally announced August 2018.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab: an update on PR12-16-001
Authors:
M. Battaglieri,
A. Bersani,
G. Bracco,
B. Caiffi,
A. Celentano,
R. De Vita,
L. Marsicano,
P. Musico,
M. Osipenko,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondi',
P. Castorina,
M. De Napoli,
A. Italiano,
V. Kuznetzov,
E. Leonora,
F. Mammoliti,
N. Randazzo,
L. Re,
G. Russo,
M. Russo
, et al. (101 additional authors not shown)
Abstract:
This document is an update to the proposal PR12-16-001 Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab submitted to JLab-PAC44 in 2016 reporting progress in addressing questions raised regarding the beam-on backgrounds. The concerns are addressed by adopting a new simulation tool, FLUKA, and planning measurements of muon fluxes from the dump with its existing shielding around t…
▽ More
This document is an update to the proposal PR12-16-001 Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab submitted to JLab-PAC44 in 2016 reporting progress in addressing questions raised regarding the beam-on backgrounds. The concerns are addressed by adopting a new simulation tool, FLUKA, and planning measurements of muon fluxes from the dump with its existing shielding around the dump. First, we have implemented the detailed BDX experimental geometry into a FLUKA simulation, in consultation with experts from the JLab Radiation Control Group. The FLUKA simulation has been compared directly to our GEANT4 simulations and shown to agree in regions of validity. The FLUKA interaction package, with a tuned set of biasing weights, is naturally able to generate reliable particle distributions with very small probabilities and therefore predict rates at the detector location beyond the planned shielding around the beam dump. Second, we have developed a plan to conduct measurements of the muon ux from the Hall-A dump in its current configuration to validate our simulations.
△ Less
Submitted 8 January, 2018; v1 submitted 5 December, 2017;
originally announced December 2017.
-
First FAMU observation of muon transfer from mu-p atoms to higher-Z elements
Authors:
FAMU Collaboration,
Emiliano Mocchiutti,
Valter Bonvicini,
Rita Carbone,
Miltcho Danailov,
Elena Furlanetto,
Komlan Segbeya Gadedjisso-Tossou,
Daniele Guffanti,
Cecilia Pizzolotto,
Alexandre Rachevski,
Lyubomir Stoychev,
Erik Silvio Vallazza,
Gianluigi Zampa,
Joseph Niemela,
Katsuhiko Ishida,
Andrzej Adamczak,
Giovanni Baccolo,
Roberto Benocci,
Roberto Bertoni,
Maurizio Bonesini,
Francesco Chignoli,
Massimiliano Clemenza,
Alessandro Curioni,
Valter Maggi,
Roberto Mazza
, et al. (32 additional authors not shown)
Abstract:
The FAMU experiment aims to accurately measure the hyperfine splitting of the ground state of the muonic hydrogen atom. A measurement of the transfer rate of muons from hydrogen to heavier gases is necessary for this purpose. In June 2014, within a preliminary experiment, a pressurized gas-target was exposed to the pulsed low-energy muon beam at the RIKEN RAL muon facility (Rutherford Appleton Lab…
▽ More
The FAMU experiment aims to accurately measure the hyperfine splitting of the ground state of the muonic hydrogen atom. A measurement of the transfer rate of muons from hydrogen to heavier gases is necessary for this purpose. In June 2014, within a preliminary experiment, a pressurized gas-target was exposed to the pulsed low-energy muon beam at the RIKEN RAL muon facility (Rutherford Appleton Laboratory, UK). The main goal of the test was the characterization of both the noise induced by the pulsed beam and the X-ray detectors. The apparatus, to some extent rudimental, has served admirably to this task. Technical results have been published that prove the validity of the choices made and pave the way for the next steps. This paper presents the results of physical relevance of measurements of the muon transfer rate to carbon dioxide, oxygen, and argon from non-thermalized excited mu-p atoms. The analysis methodology and the approach to the systematics errors are useful for the subsequent study of the transfer rate as function of the kinetic energy of the mu-p currently under way.
△ Less
Submitted 15 December, 2017; v1 submitted 10 August, 2017;
originally announced August 2017.
-
Interoperability in Planetary Research for Geospatial Data Analysis
Authors:
Trent M. Hare,
Angelo P. Rossi,
Alessandro Frigeri,
Chiara Marmo
Abstract:
For more than a decade there has been a push in the planetary science community to support interoperable methods for accessing and working with geospatial data. Common geospatial data products for planetary research include image mosaics, digital elevation or terrain models, geologic maps, geographic location databases (e.g., craters, volcanoes) or any data that can be tied to the surface of a pla…
▽ More
For more than a decade there has been a push in the planetary science community to support interoperable methods for accessing and working with geospatial data. Common geospatial data products for planetary research include image mosaics, digital elevation or terrain models, geologic maps, geographic location databases (e.g., craters, volcanoes) or any data that can be tied to the surface of a planetary body (including moons, comets or asteroids). Several U.S. and international cartographic research institutions have converged on map** standards that embrace standardized geospatial image formats, geologic map** conventions, U.S. Federal Geographic Data Committee (FGDC) cartographic and metadata standards, and notably on-line map** services as defined by the Open Geospatial Consortium (OGC).
△ Less
Submitted 8 June, 2017;
originally announced June 2017.
-
Kohn-Sham decomposition in real-time time-dependent density-functional theory: An efficient tool for analyzing plasmonic excitations
Authors:
Tuomas P. Rossi,
Mikael Kuisma,
Martti J. Puska,
Risto M. Nieminen,
Paul Erhart
Abstract:
The real-time-propagation formulation of time-dependent density-functional theory (RT-TDDFT) is an efficient method for modeling the optical response of molecules and nanoparticles. Compared to the widely adopted linear-response TDDFT approaches based on, e.g., the Casida equations, RT-TDDFT appears, however, lacking efficient analysis methods. This applies in particular to a decomposition of the…
▽ More
The real-time-propagation formulation of time-dependent density-functional theory (RT-TDDFT) is an efficient method for modeling the optical response of molecules and nanoparticles. Compared to the widely adopted linear-response TDDFT approaches based on, e.g., the Casida equations, RT-TDDFT appears, however, lacking efficient analysis methods. This applies in particular to a decomposition of the response in the basis of the underlying single-electron states. In this work, we overcome this limitation by develo** an analysis method for obtaining the Kohn-Sham electron-hole decomposition in RT-TDDFT. We demonstrate the equivalence between the developed method and the Casida approach by a benchmark on small benzene derivatives. Then, we use the method for analyzing the plasmonic response of icosahedral silver nanoparticles up to Ag$_{561}$. Based on the analysis, we conclude that in small nanoparticles individual single-electron transitions can split the plasmon into multiple resonances due to strong single-electron-plasmon coupling whereas in larger nanoparticles a distinct plasmon resonance is formed.
△ Less
Submitted 8 March, 2017;
originally announced March 2017.
-
Steps towards the hyperfine splitting measurement of the muonic hydrogen ground state: pulsed muon beam and detection system characterization
Authors:
A. Adamczak,
G. Baccolo,
D. Bakalov,
G. Baldazzi,
R. Bertoni,
M. Bonesini,
V. Bonvicini,
R. Campana,
R. Carbone,
T. Cervi,
F. Chignoli,
M. Clemenza,
L. Colace,
A. Curioni,
M. Danailov,
P. Danev,
I. D'Antone,
A. De,
C. De,
M. De,
M. Furini,
F. Fuschino,
K. Gadejisso-Tossou,
D. Guffanti,
A. Iaciofano
, et al. (30 additional authors not shown)
Abstract:
The high precision measurement of the hyperfine splitting of the muonic-hydrogen atom ground state with pulsed and intense muon beam requires careful technological choices both in the construction of a gas target and of the detectors. In June 2014, the pressurized gas target of the FAMU experiment was exposed to the low energy pulsed muon beam at the RIKEN RAL muon facility. The objectives of the…
▽ More
The high precision measurement of the hyperfine splitting of the muonic-hydrogen atom ground state with pulsed and intense muon beam requires careful technological choices both in the construction of a gas target and of the detectors. In June 2014, the pressurized gas target of the FAMU experiment was exposed to the low energy pulsed muon beam at the RIKEN RAL muon facility. The objectives of the test were the characterization of the target, the hodoscope and the X-ray detectors. The apparatus consisted of a beam hodoscope and X-rays detectors made with high purity Germanium and Lanthanum Bromide crystals. In this paper the experimental setup is described and the results of the detector characterization are presented.
△ Less
Submitted 21 June, 2016; v1 submitted 6 April, 2016;
originally announced April 2016.
-
Test of the CLAS12 RICH large scale prototype in the direct proximity focusing configuration
Authors:
N. Baltzell,
L. Barion,
F. Benmokhtar,
W. Brooks,
E. Cisbani,
M. Contalbrigo,
A. El Alaoui,
K. Hafidi,
M. Hoek,
V. Kubarovsky,
L. Lagamba,
V. Lucherini,
R. Malaguti,
M. Mirazita,
R. A. Montgomery,
A. Movsisyan,
P. Musico,
A. Orlandi,
D. Orecchini,
L. L. Pappalardo,
R. Perrino,
J. Phillips,
S. Pisano,
P. Rossi,
S. Squerzanti
, et al. (3 additional authors not shown)
Abstract:
A large area ring-imaging Cherenkov detector has been designed to provide clean hadron identification capability in the momentum range from 3 GeV/c up to 8 GeV/c for the CLAS12 experiments at the upgraded 12 GeV continuous electron beam accelerator facility of Jefferson Laboratory. The adopted solution foresees a novel hybrid optics design based on aerogel radiator, composite mirrors and high-pack…
▽ More
A large area ring-imaging Cherenkov detector has been designed to provide clean hadron identification capability in the momentum range from 3 GeV/c up to 8 GeV/c for the CLAS12 experiments at the upgraded 12 GeV continuous electron beam accelerator facility of Jefferson Laboratory. The adopted solution foresees a novel hybrid optics design based on aerogel radiator, composite mirrors and high-packed and high-segmented photon detectors. Cherenkov light will either be imaged directly (forward tracks) or after two mirror reflections (large angle tracks). We report here the results of the tests of a large scale prototype of the RICH detector performed with the hadron beam of the CERN T9 experimental hall for the direct detection configuration. The tests demonstrated that the proposed design provides the required pion-to-kaon rejection factor of 1:500 in the whole momentum range.
△ Less
Submitted 1 February, 2016; v1 submitted 9 September, 2015;
originally announced September 2015.
-
Nanoplasmonics simulations at the basis set limit through completeness-optimized, local numerical basis sets
Authors:
Tuomas P. Rossi,
Susi Lehtola,
Arto Sakko,
Martti J. Puska,
Risto M. Nieminen
Abstract:
We present an approach for generating local numerical basis sets of improving accuracy for first-principles nanoplasmonics simulations within time-dependent density functional theory. The method is demonstrated for copper, silver, and gold nanoparticles that are of experimental interest but computationally demanding due to the semi-core d-electrons that affect their plasmonic response. The basis s…
▽ More
We present an approach for generating local numerical basis sets of improving accuracy for first-principles nanoplasmonics simulations within time-dependent density functional theory. The method is demonstrated for copper, silver, and gold nanoparticles that are of experimental interest but computationally demanding due to the semi-core d-electrons that affect their plasmonic response. The basis sets are constructed by augmenting numerical atomic orbital basis sets by truncated Gaussian-type orbitals generated by the completeness-optimization scheme, which is applied to the photoabsorption spectra of homoatomic metal atom dimers. We obtain basis sets of improving accuracy up to the complete basis set limit and demonstrate that the performance of the basis sets transfers to simulations of larger nanoparticles and nanoalloys as well as to calculations with various exchange-correlation functionals. This work promotes the use of the local basis set approach of controllable accuracy in first-principles nanoplasmonics simulations and beyond.
△ Less
Submitted 3 September, 2015;
originally announced September 2015.
-
Quantized evolution of the plasmonic response in a stretched nanorod
Authors:
Tuomas P. Rossi,
Asier Zugarramurdi,
Martti J. Puska,
Risto M. Nieminen
Abstract:
Quantum aspects, such as electron tunneling between closely separated metallic nanoparticles, are crucial for understanding the plasmonic response of nanoscale systems. We explore quantum effects on the response of the conductively coupled metallic nanoparticle dimer. This is realized by stretching a nanorod, which leads to the formation of a narrowing atomic contact between the two nanorod ends.…
▽ More
Quantum aspects, such as electron tunneling between closely separated metallic nanoparticles, are crucial for understanding the plasmonic response of nanoscale systems. We explore quantum effects on the response of the conductively coupled metallic nanoparticle dimer. This is realized by stretching a nanorod, which leads to the formation of a narrowing atomic contact between the two nanorod ends. Based on first-principles time-dependent density-functional-theory calculations, we find a discontinuous evolution of the plasmonic response as the nanorod is stretched. This is especially pronounced for the intensity of the main charge-transfer plasmon mode. We show the correlation between the observed discontinuities and the discrete nature of the conduction channels supported by the formed atomic-sized junction.
△ Less
Submitted 7 December, 2015; v1 submitted 3 September, 2015;
originally announced September 2015.
-
Investigation of Hamamatsu H8500 phototubes as single photon detectors
Authors:
M. Hoek,
V. Lucherini,
M. Mirazita,
R. A. Montgomery,
A. Orlandi,
S. Anefalos Pereira,
S. Pisano,
P. Rossi,
A. Viticchiè,
A. Witchger
Abstract:
We have investigated the response of a significant sample of Hamamatsu H8500 MultiAnode PhotoMultiplier Tubes (MAPMTs) as single photon detectors, in view of their use in a ring imaging Cherenkov counter for the CLAS12 spectrometer at the Thomas Jefferson National Accelerator Facility. For this, a laser working at 407.2nm wavelength was employed. The sample is divided equally into standard window…
▽ More
We have investigated the response of a significant sample of Hamamatsu H8500 MultiAnode PhotoMultiplier Tubes (MAPMTs) as single photon detectors, in view of their use in a ring imaging Cherenkov counter for the CLAS12 spectrometer at the Thomas Jefferson National Accelerator Facility. For this, a laser working at 407.2nm wavelength was employed. The sample is divided equally into standard window type, with a spectral response in the visible light region, and UV-enhanced window type MAPMTs. The studies confirm the suitability of these MAPMTs for single photon detection in such a Cherenkov imaging application.
△ Less
Submitted 24 March, 2015; v1 submitted 9 September, 2014;
originally announced September 2014.
-
Exploiting all phone media? A multidimensional network analysis of phone users' sociality
Authors:
Matteo Zignani,
Christian Quadri,
Sabrina Gaitto,
Gian Paolo Rossi
Abstract:
The growing awareness that human communications and social interactions are assuming a stratified structure, due to the availability of multiple techno-communication channels, including online social networks, mobile phone calls, short messages (SMS) and e-mails, has recently led to the study of multidimensional networks, as a step further the classical Social Network Analysis. A few papers have b…
▽ More
The growing awareness that human communications and social interactions are assuming a stratified structure, due to the availability of multiple techno-communication channels, including online social networks, mobile phone calls, short messages (SMS) and e-mails, has recently led to the study of multidimensional networks, as a step further the classical Social Network Analysis. A few papers have been dedicated to develop the theoretical framework to deal with such multiplex networks and to analyze some example of multidimensional social networks. In this context we perform the first study of the multiplex mobile social network, gathered from the records of both call and text message activities of millions of users of a large mobile phone operator over a period of 12 weeks. While social networks constructed from mobile phone datasets have drawn great attention in recent years, so far studies have dealt with text message and call data, separately, providing a very partial view of people sociality expressed on phone. Here we analyze how the call and the text message dimensions overlap showing how many information about links and nodes could be lost only accounting for a single layer and how users adopt different media channels to interact with their neighborhood.
△ Less
Submitted 14 January, 2014;
originally announced January 2014.
-
Invariant expectation values in the sampling of discrete frequency distributions
Authors:
Paolo Rossi
Abstract:
The general relationship between an arbitrary frequency distribution and the expectation value of the frequency distributions of its samples is discussed. A wide set of measurable quantities ("invariant moments") whose expectation value does not in general depend on the size of the sample is constructed and illustrated by applying the results to Ewens sampling formula. Invariant moments are especi…
▽ More
The general relationship between an arbitrary frequency distribution and the expectation value of the frequency distributions of its samples is discussed. A wide set of measurable quantities ("invariant moments") whose expectation value does not in general depend on the size of the sample is constructed and illustrated by applying the results to Ewens sampling formula. Invariant moments are especially useful in the sampling of systems characterized by the absence of an intrinsic scale. Distribution functions that may parametrize the samples of scale-free distributions are considered and their invariant expectation values are computed. The conditions under which the scaling limit of such distributions may exist are described.
△ Less
Submitted 2 May, 2013;
originally announced May 2013.
-
On sampling and parametrization of discrete frequency distributions
Authors:
Paolo Rossi
Abstract:
The general relationship between an arbitrary frequency distribution and the expectation value of the frequency distributions of its samples is esablished. A set of combinations of expectation values whose value does not in general depend on the size of the sample is constructed. Distribution functions such that the distribution of the expectation values of their samples is invariant in form are f…
▽ More
The general relationship between an arbitrary frequency distribution and the expectation value of the frequency distributions of its samples is esablished. A set of combinations of expectation values whose value does not in general depend on the size of the sample is constructed. Distribution functions such that the distribution of the expectation values of their samples is invariant in form are found and studied. The conditions under which the scaling limit of such distributions may exist are described.
△ Less
Submitted 4 October, 2012;
originally announced October 2012.
-
On the time dependence of the $h$-index
Authors:
Riccardo Mannella,
Paolo Rossi
Abstract:
The time dependence of the $h$-index is analyzed by considering the average behaviour of $h$ as a function of the academic age $A_A$ for about 1400 Italian physicists, with career lengths spanning from 3 to 46 years. The individual $h$-index is strongly correlated with the square root of the total citations $N_C$: $h \approx 0.53 \sqrt{N_C}$. For academic ages ranging from 12 to 24 years, the dist…
▽ More
The time dependence of the $h$-index is analyzed by considering the average behaviour of $h$ as a function of the academic age $A_A$ for about 1400 Italian physicists, with career lengths spanning from 3 to 46 years. The individual $h$-index is strongly correlated with the square root of the total citations $N_C$: $h \approx 0.53 \sqrt{N_C}$. For academic ages ranging from 12 to 24 years, the distribution of the time scaled index $h/\sqrt{A_A}$ is approximately time-independent and it is well described by the Gompertz function. The time scaled index $h/\sqrt{A_A}$ has an average approximately equal to 3.8 and a standard deviation approximately equal to 1.6. Finally, the time scaled index $h/\sqrt{A_A}$ appears to be strongly correlated with the contemporary $h$-index $h_c$.
△ Less
Submitted 15 July, 2012;
originally announced July 2012.
-
On the Bursty Evolution of Online Social Networks
Authors:
Sabrina Gaito,
Matteo Zignani,
Gian Paolo Rossi,
Alessandra Sala,
Xiao Wang,
Haitao Zheng,
Ben Y. Zhao
Abstract:
The high level of dynamics in today's online social networks (OSNs) creates new challenges for their infrastructures and providers. In particular, dynamics involving edge creation has direct implications on strategies for resource allocation, data partitioning and replication. Understanding network dynamics in the context of physical time is a critical first step towards a predictive approach towa…
▽ More
The high level of dynamics in today's online social networks (OSNs) creates new challenges for their infrastructures and providers. In particular, dynamics involving edge creation has direct implications on strategies for resource allocation, data partitioning and replication. Understanding network dynamics in the context of physical time is a critical first step towards a predictive approach towards infrastructure management in OSNs. Despite increasing efforts to study social network dynamics, current analyses mainly focus on change over time of static metrics computed on snapshots of social graphs. The limited prior work models network dynamics with respect to a logical clock. In this paper, we present results of analyzing a large timestamped dataset describing the initial growth and evolution of Renren, the leading social network in China. We analyze and model the burstiness of link creation process, using the second derivative, i.e. the acceleration of the degree. This allows us to detect bursts, and to characterize the social activity of a OSN user as one of four phases: acceleration at the beginning of an activity burst, where link creation rate is increasing; deceleration when burst is ending and link creation process is slowing; cruising, when node activity is in a steady state, and complete inactivity.
△ Less
Submitted 25 May, 2012; v1 submitted 30 March, 2012;
originally announced March 2012.
-
Revisiting Degree Distribution Models for Social Graph Analysis
Authors:
Alessandra Sala,
Sabrina Gaito,
Gian Paolo Rossi,
Haitao Zheng,
Ben Y. Zhao
Abstract:
Degree distribution models are incredibly important tools for analyzing and understanding the structure and formation of social networks, and can help guide the design of efficient graph algorithms. In particular, the Power-law degree distribution has long been used to model the structure of online social networks, and is the basis for algorithms and heuristics in graph applications such as influe…
▽ More
Degree distribution models are incredibly important tools for analyzing and understanding the structure and formation of social networks, and can help guide the design of efficient graph algorithms. In particular, the Power-law degree distribution has long been used to model the structure of online social networks, and is the basis for algorithms and heuristics in graph applications such as influence maximization and social search. Along with recent measurement results, our interest in this topic was sparked by our own experimental results on social graphs that deviated significantly from those predicted by a Power-law model. In this work, we seek a deeper understanding of these deviations, and propose an alternative model with significant implications on graph algorithms and applications. We start by quantifying this artifact using a variety of real social graphs, and show that their structures cannot be accurately modeled using elementary distributions including the Power-law. Instead, we propose the Pareto-Lognormal (PLN) model, verify its goodness-of-fit using graphical and statistical methods, and present an analytical study of its asymptotical differences with the Power-law. To demonstrate the quantitative benefits of the PLN model, we compare the results of three wide-ranging graph applications on real social graphs against those on synthetic graphs generated using the PLN and Power-law models. We show that synthetic graphs generated using PLN are much better predictors of degree distributions in real graphs, and produce experimental results with errors that are orders-of-magnitude smaller than those produced by the Power-law model.
△ Less
Submitted 29 July, 2011;
originally announced August 2011.
-
Renormalization group evaluation of exponents in family name distributions
Authors:
Andrea De Luca,
Paolo Rossi
Abstract:
According to many phenomenological and theoretical studies the distribution of family name frequencies in a population can be asymptotically described by a power law. We show that the Galton-Watson process corresponding to the dynamics of a growing population can be represented in Hilbert space, and its time evolution may be analyzed by renormalization group techniques, thus explaining the origi…
▽ More
According to many phenomenological and theoretical studies the distribution of family name frequencies in a population can be asymptotically described by a power law. We show that the Galton-Watson process corresponding to the dynamics of a growing population can be represented in Hilbert space, and its time evolution may be analyzed by renormalization group techniques, thus explaining the origin of the power law and establishing the connection between its exponent and the ratio between the population growth and the name production rates.
△ Less
Submitted 3 April, 2009; v1 submitted 12 February, 2009;
originally announced February 2009.
